F-23-FR даташит

F-23-FR даташит
Caps
End Caps, 101A011 to 094
Raychem end caps provide
optimum waterproofing and
environmental protection for
underwater, underground,
or outdoor applications.
The end caps are highly
resistant to moisture,
fungus, and weathering.
Applications
Use for protecting cables
and pipes or capping
unused outlets in transitions. Provides an environmental seal when used with
adhesive.
As Supplied (a)
4
After Unrestricted Recovery (b)
Product Dimensions
Part
No.
101A011
101A021
101A031
101A041
101A052
101A062
101A073
101A083
101A094
H
Min.
a
5.10 [.20]
7.40 [.29]
10.20 [.40]
15.20 [.60]
20.60 [.81]
25.40 [1.00]
39.40 [1.56]
50.80 [2.00]
83.80 [3.30]
P
Min.
b
22.90 [.90]
25.40 [1.00]
30.50 [1.20]
40.60 [1.60]
61.00 [2.40]
68.80 [2.70]
91.40 [3.60]
101.60 [4.00]
114.30 [4.50]
Max.
b
2.00 [.08]
3.30 [.13]
4.80 [.18]
6.40 [.25]
9.40 [.37]
11.40 [.45]
18.00 [.71]
22.90 [.90]
38.10 [1.50]
HW
±20%
b
1.02 [.04]
1.27 [.05]
1.52 [.06]
1.78 [.07]
2.03 [.08]
2.29 [.09]
2.54 [.10]
2.79 [.11]
3.05 [.12]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-49
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Caps
End Caps, 101A011 to 094 (Continued)
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
4-50
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Caps
SSC
Heat-Shrinkable End Caps
Product Facts
Self-sealing for
waterproofing (sealantcoated parts only)
■ Electrical insulation to
1000 V
■ Abrasion-resistance
■ Mechanical protection
■ Easy installation, requiring
no special skills
■ Operating temperature range
of -40°C to 85°C [-40°F to
185°F]
■ Minimum shrink
temperature of 121°C
[250°F]
■
4
Applications
These SSC heat-shrinkable
end caps are made from
a thermally stabilized,
modified polyolefin, which
makes them highly resistant
to moisture, fungus, and
weathering. The end caps
also have excellent
electrical properties. End
caps coated with sealant
are available for underwater
Available in:
or underground applications with a pressure differential up to 20 psi between
the inside of the cable and
the outside environment.
End caps may be used over
lead, steel, aluminum,
copper, polyethylene,
polyolefin, EPR, and PVC
jacketing materials.
Americas
Europe
Asia Pacific
■
■
■
4-51
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Caps
SSC (Continued)
Specifications/Approvals
Product Dimensions
Type
SSC-XXX-FR
SSC-X and SSC-XTV
S-1017
S-1297
102L0XX
Raychem
RWXXXX SSC-XX-FR specification control drawing
SSC specification control drawing
RT-1050/1
RW-2019
RW-2024
Military/Commercial
MIL-I-81765/1A
PPS-3011/6
—
—
—
SSC-1
SSC-2
SSC-3
SSC-4
SSC-5
SSC-5M1
SSC-6
SSC-7
Inner Diameter*
As Supplied
(min.)
10.00 [.390]
20.00 [.790]
35.00 [1.380]
55.00 [2.170]
75.00 [2.950]
75.00 [2.950]
100.00 [3.940]
120.00 [4.720]
Part Length
Recovered
(max.)
4.00 [.160]
7.50 [.300]
15.00 [.590]
25.00 [.980]
32.00 [1.250]
32.00 [1.250]
45.00 [1.770]
70.00 [2.760]
Wall Thickness (nom.)
Recovered
± 10 %
33.50 [1.320]
55.30 [2.180]
89.90 [3.540]
143.20 [5.640]
150.10 [5.910]
79.25 [3.120]
162.50 [6.400]
145.00 [5.710]
SSC-075-FR
SSC-150-FR
19.05 [.750]
38.10 [1.500]
9.90 [.390]
20.06 [.790]
± .25
76.20 [3.000]
79.50 [3.130]
Part
No.
Recovered
± 20 %
2.00 [.080]
2.30 [.090]
3.00 [.120]
3.30 [.130]
3.30 [.130]
3.30 [.130]
4.00 [.160]
3.80 [.150]
± .010
2.03 [.080]
2.54 [.100]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
*Adhesive is optional. As-supplied dimensions appearing in table are for uncoated parts. When adhesive is added,
entry diameters will be reduced by 1.5 [.06] maximum.
Ordering Information
Military
SSC-XTV
SSC-X
SSC-XU
SSC-XXX-FR U
SSC-XXX-FR
Sealing end cap with adhesive S-1017 and valve
Sealing end cap with adhesive S-1017
End cap, uncoated
End cap, uncoated, round end
Sealing end cap with adhesive S-1297, round end
4-52
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202A111 to 196
Straight Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Use for mechanical protection and connector/cable
strain relief. This family of
boots has no lip, so that
a boot can be installed
directly onto the connector
accessory thread.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
202A111
202A121
202A132
202A142
202A153
202A163
202A174
202A185
202A196
Min.
- 3 ,- 4 , -25
a
16.5 [.65]
24.6 [.97]
28.4 [1.12]
31.0 [1.22]
36.1 [1.42]
42.7 [1.68]
51.8 [2.04]
66.0 [2.60]
86.4 [3.40]
-12,-100
a
16.5 [.65]
22.6 [.89]
26.2 [1.03]
31.0 [1.22]
36.1 [1.42]
42.7 [1.68]
48.3 [1.90]
66.0 [2.60]
86.4 [3.40]
J
Max.
b
7.9 [.31]
9.9 [.39]
14.2 [.56]
17.8 [.70]
21.9 [.86]
27.4 [1.08]
35.3 [1.39]
43.7 [1.72]
57.2 [2.25]
Min.
- 3 ,- 4 , -25
a
16.5 [.65]
24.6 [.97]
28.4 [1.12]
31.0 [1.22]
36.1 [1.42]
42.7 [1.68]
51.8 [2.04]
66.0 [2.60]
86.4 [3.40]
-12,-100
a
11.9 [.47]
17.8 [.70]
20.3 [.80]
25.4 [1.00]
26.2 [1.03]
27.2 [1.07]
48.3 [1.90]
54.1 [2.13]
71.4 [2.81]
Max.
b
P
±10%
b
R
±10%
b
JO
Ref.
b
3.8 [.15]
5.3 [.21]
6.6 [.26]
7.4 [.29]
8.6 [.34]
9.4 [.37]
16.0 [.63]
19.6 [.77]
26.9 [1.06]
25.4 [1.00]
38.1 [1.50]
51.3 [2.02]
66.8 [2.63]
73.7 [2.90]
99.1 [3.90]
130.0 [5.13]
161.3 [6.35]
212.6 [8.37]
14.2 [.56]
21.8 [.86]
27.9 [1.10]
35.6 [1.40]
41.4 [1.63]
62.7 [2.47]
64.8 [2.55]
90.2 [3.55]
113.0 [4.45]
5.8 [.23]
9.1 [.36]
13.0 [.51]
17.8 [.70]
16.0 [.63]
18.0 [.71]
41.9 [1.65]
47.8 [1.88]
62.2 [2.45]
W
±20%
b
1.27 [.05]
1.52 [.06]
1.78 [.07]
1.78 [.07]
1.78 [.07]
2.03 [.08]
3.30 [.13]
3.81 [.15]
4.06 [.16]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-53
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202C611 to 663
Uniboot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Use to provide abrasion
protection for connectors.
The flexibility of design
allows a variety of cable
outlet angles. When
installed on a spin-coupling
adapter, cold reentry to the
Materials Available
Material*
-50
-51
-71
connector is possible by
compressing the molded
part. When used with
adhesive it provides
environmental sealing.
Material Description
Viton polymer blend
Elastomer polymer blend
Flexible polyolefin
Precoating No.
N/A
/164
/42 or /86
Adhesive Part No.**
S-1125
S-1124
S-1017 or S-1048
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
202C611
202C621
202C632
202C642
202C653
202C663
H
Min.
a -50, -51
14.2 [.56]
22.4 [.88]
34.0 [1.34]
44.2 [1.74]
21.2 [53.8]
22.5 [57.2]
a -71
17.5 [.69]
26.4 [1.04]
38.1 [1.50]
47.8 [1.88]
54.9 [2.16]
77.2 [3.04]
Max.
b
6.9 [.27]
11.7 [.46]
17.5 [.69]
22.4 [.88]
27.9 [1.10]
40.6 [1.60]
J
Min.
a -50, -51
a -71
11.2 [.44] 14.2 [.56]
17.8 [.70] 26.4 [1.04]
26.9 [1.06] 38.1 [1.50]
36.6 [1.44] 47.8 [1.88]
45.7 [1.80] 54.9 [2.16]
57.2 [2.25] 54.6 [2.15]
Max.
b
4.8 [.19]
8.1 [.32]
12.7 [.50]
17.5 [.69]
22.4 [.88]
22.9 [.90]
K
Max.
b
P
±10%
b
21.1 [.83]
26.7 [1.05]
32.8 [1.29]
37.8 [1.49]
42.9 [1.69]
62.2 [2.45]
120.7 [4.75]
133.4 [5.25]
146.1 [5.75]
158.8 [6.25]
171.5 [6.75]
236.2 [9.30]
JO
±10%
b
17.5 [.69]
19.0 [.78]
22.4 [.88]
25.4 [1.00]
28.4 [1.12]
35.1 [1.38]
S
±.03[0.76]
b
1.52 [.06]
1.52 [.06]
1.78 [.07]
1.78 [.07]
1.78 [.07]
2.03 [.08]
T
±.03[0.76]
b
1.27 [.05]
1.27 [.05]
1.27 [.05]
1.27 [.05]
2.03 [.08]
2.03 [.08]
W
Min.
b
0.33 [.013]
0.46 [.018]
0.51 [.020]
0.61 [.024]
0.61 [.024]
0.66 [.026]
B
Nom.
b
62.5 [2.46]
67.8 [2.67]
73.4 [2.89]
78.2 [3.08]
82.8 [3.26]
138.4 [5.45]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-54
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202D121 to 196
Straight, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular connectors. Boot is compatible
with all Raychem grooved
adapters of appropriate
shell size.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
202D121
202D132
202D142
202D153
202D163
202D174
202D185
202D196
J
Min.
a
Max.
b
23.3 [.92]
28.4 [1.12]
31.0 [1.22]
36.0 [1.42]
42.7 [1.68]
51.8 [2.04]
66.0 [2.60]
81.7 [3.22]
10.5 [.41]
14.3 [.56]
17.8 [.70]
22.4 [.88]
28.2 [1.11]
35.1 [1.38]
44.5 [1.75]
57.6 [2.27]
Min.
-3, -4, -25
a
23.3 [.92]
28.4 [1.12]
31.0 [1.22]
36.0 [1.42]
42.7 [1.68]
51.8 [2.04]
66.0 [2.60]
81.7 [3.22]
-12, -100
a
12.4 [.49]
14.7 [.58]
16.0 [.63]
18.5 [.73]
22.0 [.87]
35.3 [1.39]
45.7 [1.80]
57.1 [2.25]
Max.
b
5.6 [.22]
6.6 [.26]
7.2 [.28]
8.4 [.33]
9.9 [.39]
15.8 [.62]
20.4 [.80]
25.4 [1.00]
P
±10%
b
JO
±10%
b
W
±20%
b
38.1 [1.50]
54.9 [2.16]
66.8 [2.63]
80.0 [3.15]
103.6 [4.08]
130.3 [5.13]
165.1 [6.50]
177.8 [7.00]
10.2 [.40]
16.5 [.65]
17.8 [.70]
20.8 [.82]
24.6 [.97]
39.6 [1.56]
48.3 [1.90]
47.8 [1.88]
1.78 [.07]
1.78 [.07]
2.03 [.08]
2.03 [.08]
2.29 [.09]
3.30 [.13]
4.06 [.16]
4.06 [.16]
RR
±10%
b
—
21.6 [.85]
24.5 [.96]
29.7 [1.17]
36.7 [1.44]
53.8 [2.12]
65.6 [2.59]
67.1 [2.64]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5
[.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-55
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202D211 to 299
Straight, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Use with circular connectors and the appropriate
Raychem backshell adapter
to provide connector/cable
strain relief. Boot is used on
Materials Available
Material*
-3
-4
-12
-25
-100
open-wire-bundle airborne
harnesses, or applications
where the long tail replaces
cable jacketing removed
during termination.
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
202D211
202D221
202D232
202D242
202D253
202D263
202D274
202D285
202D296
202D299
J
Min.
Min.
a
Max.
b
22.4 [.88]
25.7 [1.01]
29.5 [1.16]
34.0 [1.34]
37.3 [1.47]
43.7 [1.72]
50.0 [1.97]
62.7 [2.47]
69.3 [2.73]
81.8 [3.22]
11.4 [.45]
15.0 [.59]
18.8 [.74]
22.9 [.90]
29.5 [1.16]
34.0 [1.34]
41.2 [1.62]
47.0 [1.85]
59.7 [2.35]
67.1 [2.64]
-3, -4,
-25
a
22.4 [.88]
25.7 [1.01]
29.5 [1.16]
34.0 [1.34]
37.3 [1.47]
43.7 [1.72]
50.0 [1.97]
62.7 [2.47]
69.3 [2.73]
81.8 [3.22]
-12, -100
a
Max.
b
P
±10%
b
JO
±10%
b
14.0 [.55]
16.0 [.63]
18.3 [.72]
21.3 [.84]
23.1 [.91]
27.2 [1.07]
31.5 [1.24]
39.1 [1.54]
43.2 [1.70]
51.1 [2.01]
6.4 [.25]
7.4 [.29]
8.4 [.33]
9.7 [.38]
10.4 [.41]
12.2 [.48]
14.2 [.56]
17.5 [.69]
19.6 [.77]
22.9 [.90]
105.9 [4.17]
121.2 [4.77]
138.7 [5.46]
159.5 [6.28]
177.8 [7.00]
203.2 [8.00]
203.2 [8.00]
203.2 [8.00]
203.2 [8.00]
203.2 [8.00]
86.4 [3.40]
98.6 [3.88]
112.8 [4.44]
130.8 [5.15]
142.2 [5.60]
163.1 [6.42]
157.7 [6.21]
153.2 [6.03]
143.3 [5.64]
138.4 [5.45]
U
±10%
b
HW
±20%
b
14.2 [.56]
15.0 [.59]
15.5 [.61]
15.7 [.62]
18.0 [.71]
19.8 [.78]
20.8 [.82]
23.4 [.92]
23.6 [.93]
31.2 [1.23]
1.52 [.06]
1.52 [.06]
1.78 [.07]
1.78 [.07]
2.0 [.08]
2.0 [.08]
2.3 [.09]
2.5 [.10]
2.5 [.10]
2.5 [.10]
JW
±20%
b
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.40 [.055]
1.40 [.055]
1.40 [.055]
1.40 [.055]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5
[.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-56
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202D921 to 963
Straight, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Use with circular connectors and the appropriate
Raychem backshell adapter
to provide connector/cable
strain relief. Boot is used in
applications where only a
small number of the available contacts are utilized,
thus resulting in a high ratio
between the adapter and
cable diameters.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
202D921
202D932
202D953
202D963
J
Min.
Min.
a
Max.
b
19.3 [.76]
26.1 [1.03]
34.2 [1.35]
43.6 [1.72]
13.0 [.51]
19.1 [.75]
26.0 [1.02]
34.1 [1.34]
-3, -4,
-25
a
6.3 [.25]
7.6 [.30]
9.6 [.38]
11.4 [.45]
-12, -100
a
4.5 [.18]
5.5 [.22]
6.6 [.26]
7.8 [.31]
Max.
b
P
±10%
b
JO
±10%
b
HW
±20%
b
JW
±20%
b
2.1 [.08]
2.6 [.10]
3.1 [.12]
3.6 [.14]
60.2 [2.37]
74.2 [2.92]
84.3 [3.32]
99.6 [3.92]
37.6 [1.48]
45.0 [1.77]
51.1 [2.01]
57.7 [2.27]
1.52 [.06]
1.78 [.07]
1.78 [.07]
1.78 [.07]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5
[.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-57
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202F211 to 274
Straight, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular connectors. Boot is compatible
with all Raychem grooved
adapters of the appropriate
shell size.
Materials Available
Material*
-50
-51
-71
Material Description
Flexible Viton polymer blend
Flexible elastomer polymer blend
Flexible polyolefin
Precoating No.
N/A
/164
/42 or /86
Adhesive Part No.**
S-1125
S-1124
S-1017 or S-1048
Product Dimensions
H
Part
No.
202F211
202F221
202F232
202F242
202F253
202F263
202F274
J
Min.
Min.
a
Max.
b
23.9 [.94]
27.2 [1.07]
31.0 [1.22]
35.6 [1.40]
38.9 [1.53]
45.2 [1.78]
51.6 [2.03]
9.9 [.39]
13.2 [.52]
18.5 [.73]
22.1 [.87]
28.2 [1.11]
32.3 [1.27]
41.1 [1.62]
-3, -4,
-25
a
17.3 [.68]
20.8 [.82]
24.4 [.96]
28.7 [1.13]
31.5 [1.24]
38.4 [1.51]
45.5 [1.79]
-12, -100
a
6.6 [.26]
7.6 [.30]
8.9 [.35]
10.2 [.40]
10.9 [.43]
12.7 [.50]
15.0 [.59]
Max.
b
P
±10%
b
JO
±10%
b
HW
±20%
b
JW
±20%
b
105.9 [4.17]
121.2 [4.77]
138.7 [5.46]
159.5 [6.28]
177.8 [7.00]
203.2 [8.00]
203.2 [8.00]
11.7 [.46]
12.2 [.48]
12.2 [.48]
12.2 [.48]
14.0 [.55]
15.2 [.60]
15.2 [.60]
86.4 [3.40]
98.6 [3.88]
112.8 [4.44]
130.8 [5.15]
142.2 [5.60]
163.1 [6.42]
157.7 [6.21]
1.5 [.06]
1.5 [.06]
1.8 [.07]
1.8 [.07]
1.8 [.07]
1.8 [.07]
1.8 [.07]
1.5 [.06]
1.5 [.06]
1.5 [.06]
1.5 [.06]
1.5 [.06]
1.5 [.06]
1.8 [.07]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5
[.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-58
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202G211 to 253
Straight, Low Profile
Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular connectors. This range of parts
is compatible with all
Raychem grooved adapters
of appropriate shell or entry
size. When used with adhesive it provides environmental sealing.
Materials Available
Material Dash No.
-55
Material Description
Fluoroploymer
Adhesive
S-1255-04
Product Dimensions
Part
No.
202G211
202G221
202G232
202G242
202G253
H
Min.
a
23.9 [.94]
27.2 [1.07]
31.0 [1.22]
31.7 [1.25]
38.9 [1.53]
J
Max.
b
9.9 [.39]
13.2 [.52]
18.5 [.73]
22.1 [.87]
28.2 [1.11]
Min.
a
23.9 [.94]
27.2 [1.07]
31.0 [1.22]
31.7 [1.25]
38.9 [1.53]
Available in:
Max.
b
7.4 [.29]
8.4 [.33]
9.4 [.37]
10.7 [.42]
11.9 [.47]
P
±10%
b
105.9 [4.17]
121.2 [4.77]
138.7 [5.46]
159.5 [6.28]
177.8 [7.00]
R
±10%
b
11.7 [.46]
12.2 [.48]
12.2 [.48]
12.2 [.48]
10.6 [.42]
S
Ref.
b
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.3 [.05]
T
JO
HW
Ref.
±10%
Ref.
b
b
b
1.3 [.05] 86.4 [3.40] 1.0 [.04]
1.3 [.05] 87.4 [3.44] 1.0 [.04]
1.3 [.05] 104.4 [4.11] 1.0 [.04]
1.5 [.06] 124.5 [4.90] 1.0 [.04]
1.8 [.07] 143.5 [5.65] 1.3 [.05]
Americas
Europe
Asia Pacific
■
■
■
JW
Ref.
b
0.7 [.03]
0.7 [.03]
0.7 [.03]
0.7 [.03]
1.0 [.04]
4-59
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202G611 to 653
Uniboot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Use to provide abrasion
protection for connectors.
The flexibility of design
allows a variety of cable
outlet angles. When
installed on a spin-coupling
adapter, cold re-entry to the
connector is possible by
Materials Available
unscrewing the adapter
and compressing the
molded part. When used
with adhesive it provides
environmental sealing.
Material Dash No.
-55
Material Description
Fluoroploymer
Adhesive
S-1255-04
Product Dimensions
Part
No.
202G611
202G621
202G632
202G642
202G653
H
Min.
a
14.2 [.56]
26.6 [1.05]
33.0 [1.30]
35.5 [1.40]
42.6 [1.68]
Max.
b
6.9 [.27]
11.7 [.46]
17.5 [.69]
22.3 [.88]
27.9 [1.10]
J
Min.
Max.
a
b
11.2 [.44] 4.8 [.19]
26.6 [1.05] 8.1 [.32]
33.0 [1.30] 12.7 [.50]
35.5 [1.40] 17.5 [.69]
42.6 [1.68] 22.4 [.88]
Available in:
K
Max.
b
P
±10%
b
21.1 [.83]
26.6 [1.05]
32.7 [1.29]
37.8 [1.49]
42.9 [1.69]
120.7 [4.75]
133.8 [5.27]
151.1 [5.95]
157.2 [6.19]
170.2 [6.70]
JO
±10%
b
17.5 [.69]
19.9 [.78]
22.4 [.88]
25.4 [1.00]
28.4 [1.12]
HW
Ref.
b
JW
Ref.
b
S
Ref.
b
T
Ref.
b
B
Nom.
b
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.3 [.05]
1.3 [.05]
0.7 [.03]
0.7 [.03]
0.7 [.03]
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.3 [.05]
1.3 [.05]
1.3 [.05]
1.3 [.05]
1.3 [.05]
1.3 [.05]
1.5 [.06]
62.5 [2.46]
67.8 [2.67]
73.4 [2.89]
78.2 [3.08]
82.8 [3.26]
Americas
Europe
Asia Pacific
■
■
■
4-60
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
202K121 to 185
Straight, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
202K121 - 153 = 2 lips
202K163 - 185 = 3 lips
Mod 01 = 1 lip removed
Mod 02 = 2 lips removed
(only available in sizes 163, 174, 185).
For eyelet clip, order CS-1858 option.
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular
connectors.
Materials Available
Material*
-3
-4
-12
-25
-100
Boot is compatible with all
Raychem grooved adapters
of the appropriate shell size.
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
202K121
202K132
202K142
202K153
202K163
202K174
202K185
H
Min.
Max.
-3,-4,-12,-25
b
a
24.0 [.95] 10.4 [.41]
30.0 [1.18] 14.2 [.56]
31.0 [1.22] 18.0 [.71]
36.0 [1.42] 22.4 [.88]
43.0[1.69] 28.2 [1.11]
60.0 [2.36] 35.1 [1.38]
66.0 [2.60] 44.5 [1.75]
- 3 ,- 4 ,- 2 5
a
24.0 [.95]
30.0 [1.18]
31.0 [1.22]
36.0 [1.42]
43.0 [1.69]
60.0 [2.36]
66.0 [2.60]
J
Min.
-12
a
13.0 [.51]
14.0 [.55]
16.0 [.63]
19.0 [.75]
22.0 [.87]
35.0 [1.38]
38.0 [1.50]
-100
a
14.0 [.55]
15.0 [.59]
18.0 [.71]
21.0 [.83]
25.0 [.98]
39.0 [1.54]
42.0 [1.65]
Max.
b
P
±10%
b
R
±10%
b
U
±10%
b
JO
±10%
b
5.6 [.22]
5.9 [.23]
7.1 [.28]
8.4 [.33]
9.9 [.39]
15.7 [.62]
16.8 [.66]
38.0 [1.50]
55.0 [2.17]
67.0 [2.64]
80.0 [3.15]
99.0 [3.90]
130.0 [5.12]
170.0 [6.69]
21.0 [.83]
32.0 [1.26]
35.0 [1.38]
42.0 [1.65]
61.0 [2.40]
72.0 [2.83]
90.0 [3.54]
12.0 [.47]
12.0 [.47]
20.0 [.79]
20.0 [.79]
20.0 [.79]
20.0 [.79]
20.0 [.79]
8.5 [.33]
11.5 [.45]
17.0 [.67]
19.5 [.76]
21.0 [.82]
39.0 [1.53]
51.5 [2.02]
HW
±20%
b
JW
Min.
b
1.6 [.06] .41 [.016]
1.8 [.07] .81 [.032]
1.8 [.07] .81 [.032]
2.0 [.08] .81 [.032]
2.2 [.08] .81 [.032]
3.3 [.13] 1.02 [.040]
3.8 [.15] 1.63 [.064]
X
±20%
b
Y
±20%
b
24.0 [.94]
24.0 [.94]
32.0 [1.26]
32.0 [1.26]
52.0 [2.05]
52.0 [2.05]
52.0 [2.05]
13.0 [.51]
18.0 [.71]
25.0 [.98]
30.0 [1.18]
30.0 [1.18]
50.0 [1.97]
70.0 [2.76]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by
1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-61
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
214A011 to 052
D-Subminiature, Straight
Boot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
214A011
214A021
214A032
214A042
214A052
H
±5%
a
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
J
±5%
b
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
±5%
a
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
K
±5%
b
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
Min.
a
7.9 [.31]
10.2 [.40]
14.0 [.55]
17.3 [.68]
19.1 [.75]
Max.
b
4.1 [.16]
5.3 [.21]
8.1 [.32]
8.6 [.34]
10.7 [.42]
P
±10%
b
W
±20%
b
X
±20%
b
33.3 [1.31]
38.9 [1.53]
45.0 [1.77]
53.3 [2.10]
61.0 [2.40]
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.0 [.04]
1.0 [.04]
3.0 [.12]
3.0 [.12]
3.0 [.12]
3.0 [.12]
3.0 [.12]
This Boot Fits
Cannon/
Amphenol
Cinch
Series 17
DE-9
XX09X
DA-15
XX15X
DB-25
XX25X
DC-37
XX37X
DD-50
XX50X
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by
1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-62
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
214A311 to 352
D-Subminiature, Straight
Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
Materials Available
Material*
-3
-4
-25
Material Description
Semirigid polyolefin
Flexible polyolefin
Fluid-resistant elastomer
Precoating No.
/42 or /86
/42 or /86
/42 or /86
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1017 or S-1048 or S-1125
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
214A311
214A321
214A332
214A342
214A352
H
±5%
a
16.0 [.63]
19.1 [.75]
29.2 [1.15]
34.3 [1.35]
37.6 [1.48]
J
±5%
b
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
±5%
a
16.0 [.63]
19.1 [.75]
29.2 [1.15]
34.3 [1.35]
37.6 [1.48]
K
±5%
b
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
Min.
a
16.0 [.63]
19.1 [.75]
29.2 [1.15]
34.3 [1.35]
37.6 [1.48]
Max.
b
4.1 [.16]
5.3 [.21]
8.1 [.32]
8.6 [.34]
10.7 [.42]
P
±10%
b
R
±10%
b
W
±20%
b
X
±20%
b
33.3 [1.31]
38.9 [1.53]
45.0 [1.77]
53.3 [2.10]
61.0 [2.40]
19.1 [.75]
22.1 [.87]
25.4 [1.00]
28.4 [1.12]
31.8 [1.25]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
This Boot Fits
Cannon/
Amphenol
Cinch
Series 17
DE-9
XX09X
DA-15
XX15X
DB-25
XX25X
DC-37
XX37X
DD-50
XX50X
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by
1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-63
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
214P009 to 037
D-Subminiature, Straight
Boot with Jack Screws
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
Materials Available
Material*
-111-0
-111-8
Material Description
Semirigid polyolefin (black)
Semirigid polyolefin (gray)
*Contact Tyco Electronics for information on material properties.
Product Dimensions
Part
No.
H
±5%
b
J
±10%
b
214P009-XXX
214P015-XXX
214P025-XXX
214P037-XXX
17.3 [.68]
25.2 [.99]
38.4 [1.51]
54.2 [2.13]
12.0 [.47]
12.0 [.47]
12.0 [.47]
12.0 [.47]
K
Min.
a
9.0 [.35]
10.5 [.41]
12.0 [.47]
12.0 [.47]
Max.
b
3.8 [.15]
3.8 [.15]
5.1 [.20]
5.8 [.22]
P
±10%
b
R
Ref.
b
S
Nom.
b
T
Nom.
b
X
±20%
b
W
±20%
b
Fits Connector
Size
43.0 [1.69]
44.0 [1.73]
49.0 [1.87]
55.0 [2.16]
22.0 [.87]
23.0 [.90]
25.0 [.98]
25.0 [.98]
29.0 [1.14]
29.0 [1.14]
29.0 [1.14]
29.0 [1.14]
6.4 [.25]
6.4 [.25]
6.4 [.25]
6.4 [.25]
1.80 [.07]
2.03 [.08]
2.16 [.085]
2.26 [.089]
1.5 [.06]
1.5 [.06]
1.5 [.06]
1.5 [.06]
9 pin
15 pin
25 pin
37 pin
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-64
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
222A111 to 196
Right-Angled Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Use for mechanical protection and connector-cable
strain relief. This family of
boots has no lip, so a boot
can be installed directly
onto the connector accessory thread.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
222A111
222A121
222A132
222A142
222A152
222A163
222A174
222A185
222A196
Min.
a
Max.
b
17.8 [.70]
24.9 [.98]
30.0 [1.18]
32.5 [1.28]
36.1 [1.42]
43.9 [1.73]
53.1 [2.09]
67.6 [2.66]
87.6 [3.45]
7.9 [.31]
10.2 [.40]
14.2 [.56]
17.3 [.68]
21.8 [.86]
27.4 [1.08]
33.8 [1.33]
44.2 [1.74]
55.4 [2.18]
- 3 ,- 4 ,- 2 5
a
17.8 [.70]
24.9 [.98]
30.0 [1.18]
32.5 [1.28]
36.1 [1.42]
43.9 [1.73]
53.1 [2.09]
67.6 [2.66]
87.6 [3.45]
J
P
Min.
Max.
±10%
-100
-12
b
b
a
a
10.9 [.43] 9.9 [.39] 3.8 [.15] 17.3 [.68]
16.0 [.63] 18.0 [.71] 5.3 [.21] 21.3 [.84]
21.1 [.83] 20.6 [.81] 6.4 [.25] 26.9 [1.06]
22.9 [.90] 22.9 [.90] 6.9 [.27] 36.6 [1.44]
27.4 [1.08] 26.4 [1.04] 8.4 [.33] 43.7 [1.72]
28.4 [1.12] 27.4 [1.08] 9.4 [.37] 53.6 [2.11]
48.3 [1.90] 46.7 [1.84] 15.0 [.59] 75.7 [2.98]
58.4 [2.30] 54.4 [2.14] 20.3 [.80] 97.5 [3.84]
68.8 [2.71] 63.0 [2.48] 23.4 [.92] 128.0 [5.04]
R
±10%
b
T
±10%
b
U
±10%
b
JO
±10%
b
W
±20%
b
20.1 [.79]
22.6 [.89]
26.7 [1.05]
30.5 [1.20]
35.1 [1.38]
43.9 [1.73]
52.8 [2.08]
66.0 [2.60]
79.2 [3.12]
—
—
19.1 [.75]
19.1 [.75]
19.1 [.75]
19.1 [.75]
25.4 [1.00]
25.4 [1.00]
25.4 [1.00]
11.4 [.45]
14.7 [.58]
17.8 [.70]
24.9 [.98]
30.0 [1.18]
34.0 [1.34]
53.3 [2.10]
71.1 [2.80]
87.6 [3.45]
4.3 [.17]
5.8 [.23]
7.1 [.28]
10.2 [.40]
12.7 [.50]
17.3 [.68]
32.0 [1.26]
40.6 [1.60]
56.4 [2.22]
1.02 [.04]
1.27 [.05]
1.52 [.06]
1.78 [.07]
1.78 [.07]
2.03 [.08]
3.30 [.13]
3.81 [.15]
4.57 [.18]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-65
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
222D121 to 196
Right-Angled, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular connectors. Boot is compatible
with all Raychem grooved
adapters of the appropriate
shell size.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
222D121
222D132
222D142
222D152
222D163
222D174
222D185
222D196
J
Min.
a
Max.
a
23.4 [.92]
28.4 [1.12]
31.0 [1.22]
36.0 [1.42]
42.7 [1.68]
51.8 [2.04]
66.0 [2.60]
81.8 [3.22]
10.4 [.41]
14.2 [.56]
17.8 [.70]
22.4 [.88]
28.2 [1.11]
35.1 [1.38]
44.5 [1.75]
60.5 [2.38]
- 3 ,- 4 ,- 2 5
b
23.4 [.92]
28.4 [1.12]
31.0 [1.22]
36.0 [1.42]
42.7 [1.68]
51.8 [2.04]
66.0 [2.60]
81.8 [3.22]
Min.
-100
b
14.0 [.55]
15.0 [.59]
18.0 [.71]
21.0 [.83]
25.0 [.98]
39.0 [1.54]
42.0 [1.65]
57.2 [2.25]
P
Max.
±10%
-12
b
b
b
12.4 [.49] 5.6 [.22] 21.3 [.84]
14.7 [.58] 6.6 [.26] 33.8 [1.33]
16.0 [.63] 7.1 [.28] 36.6 [1.44]
18.5 [.73] 8.4 [.33] 43.7 [1.72]
22.1 [.87] 9.9 [.39] 53.6 [2.11]
35.3 [1.39] 15.7 [.62] 78.0 [3.07]
45.7 [1.80] 20.3 [.80] 97.5 [3.84]
57.2 [2.25] 25.4 [1.00] 117.9 [4.64]
R
Ref.
b
JO
±10%
W
±20%
K
±10%
b
L
±10%
b
22.6 [.89]
27.2 [1.07]
31.0 [1.22]
35.1 [1.38]
43.9 [1.73]
52.8 [2.08]
66.0 [2.60]
83.8 [3.30]
5.8 [.23]
15.5 [.65]
12.7 [.50]
14.5 [.57]
17.5 [.69]
33.5 [1.32]
40.1 [1.58]
38.1 [1.50]
1.27 [.05]
1.52 [.06]
1.78 [.07]
1.78 [.07]
2.03 [.08]
3.30 [.13]
3.81 [.15]
4.06 [.16]
15.2 [.60]
19.1 [.75]
19.1 [.75]
19.1 [.75]
19.3 [.76]
25.4 [1.00]
25.4 [1.00]
25.4 [1.00]
14.7 [.58]
24.9 [.98]
24.9 [.98]
30.0 [1.18]
33.0 [1.30]
53.8 [2.12]
71.1 [2.80]
80.0 [3.15]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 (.06) max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-66
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
222D211 to 299
Right-Angled, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection
between cable and connector. Boot is usually used on
open-wire-bundle airborne
harnesses, or applications
where the long tail replaces
cable jacketing removed
during termination.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
222D211
222D221
222D232
222D242
222D253
222D263
222D274
222D285
222D296
222D299
Min.
a
Max.
b
22.4 [.88]
25.7 [1.01]
29.5 [1.16]
34.0 [1.34]
37.3 [1.47]
43.7 [1.72]
50.0 [1.97]
62.7 [2.47]
69.3 [2.73]
81.8 [3.22]
11.4 [.45]
15.0 [.59]
18.8 [.74]
22.9 [.90]
29.5 [1.16]
34.0 [1.34]
41.1 [1.62]
47.0 [1.85]
59.7 [2.35]
67.1 [2.64]
J
Min.
- 3 ,- 4 ,- 2 5 -12, -100
a
b
22.4 [.88] 14.0 [.55]
25.7 [1.01] 16.0 [.63]
29.5 [1.16] 18.3 [.72]
34.0 [1.34] 21.3 [.84]
37.3 [1.47] 23.1 [.91]
43.7 [1.72] 27.2 [1.07]
50.0 [1.97] 31.5 [1.24]
62.7 [2.47] 39.1 [1.54]
69.3 [2.73] 43.2 [1.70]
81.8 [3.22] 51.1 [2.01]
Max.
b
P
±10%
b
R
Ref
b
JO
±10%
b
PP
±10%
b
RR
10%
b
HW
±20%
JW
±20%
6.4 [.25]
7.4 [.29]
8.4 [.33]
9.7 [.38]
10.4 [.41]
12.2 [.48]
14.2 [.56]
17.5 [.69]
19.6 [.77]
22.9 [.90]
105.2 [4.14]
124.0 [4.88]
146.3 [5.76]
172.2 [6.78]
185.2 [7.29]
231.6 [8.41]
224.5 [8.84]
227.3 [8.95]
233.4 [9.19]
237.0 [9.33]
18.5 [.73]
19.8 [.78]
20.8 [.82]
21.8 [.86]
24.4 [.96]
27.4 [1.08]
29.5 [1.16]
33.3 [1.31]
35.1 [1.38]
44.5 [1.75]
87.6 [3.45]
99.1 [3.90]
114.3 [4.50]
132.6 [5.22]
143.8 [5.66]
169.2 [6.66]
173.2 [6.82]
168.1 [6.62]
157.2 [6.19]
151.1 [5.95]
6.9 [.27]
8.4 [.33]
10.4 [.41]
12.2 [.48]
15.5 [.61]
18.3 [.72]
21.1 [.83]
24.1 [.95]
30.0 [1.18]
33.3 [1.31]
12.4 [.49]
15.0 [.59]
15.5 [.61]
15.7 [.62]
17.8 [.70]
19.8 [.78]
20.8 [.82]
23.4 [.92]
23.6 [.93]
31.2 [1.23]
1.52 [.06]
1.52 [.06]
1.78 [.07]
1.78 [.07]
2.03 [.08]
2.03 [.08]
2.29 [.09]
2.54 [.10]
2.54 [.10]
2.54 [.10]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.40 [.055]
1.40 [.055]
1.40 [.055]
1.40 [.055]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-67
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
222D921 to 963
Right-Angled, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection
between cable and connector. It is used in applications
where only a small number
of the available contacts are
utilized, resulting in a high
ratio between the adapter
and cable diameters.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
Product Dimensions
H
Part
No.
222D921
222D932
222D953
222D963
J
Min.
Min.
a
Max.
b
19.3 [.76]
26.1 [1.03]
34.2 [1.35]
43.6 [1.72]
13.0 [.51]
19.1 [.75]
26.0 [1.02]
34.1 [1.34]
-3, -4,
-25
a
6.3 [.25]
7.6 [.30]
9.6 [.38]
11.4 [.45]
-12,
-100
a
4.5 [.18]
5.6 [.22]
6.6 [.26]
7.8 [.31]
Max.
b
P
±10%
b
2.1 [.08] 44.5 [1.75]
2.6 [.10] 67.3 [2.65]
3.0 [.12] 81.3 [3.20]
3.6 [.14] 115.6 [4.55]
R
Ref.
b
U
±10%
b
16.3 [.64]
18.0 [.71]
18.8 [.74]
21.3 [.84]
5.6 [.22]
8.4 [.33]
11.4 [.45]
15.5 [.61]
JO
±10%
b
21.8 [.86]
29.2 [1.15]
36.3 [1.39]
47.0 [1.85]
HW
±20%
b
JW
±20%
b
1.52 [.06]
1.78 [.07]
1.78 [.07]
1.78 [.07]
1.14 [.045]
1.14 [.045]
1.14 [.045]
1.14 [.045]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 mm [.06"] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-68
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
222F211 to 285
Right-Angled, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular connectors. Boot is compatible
with all Raychem grooved
adapters of the appropriate
shell size.
Materials Available
Material*
-50
-51
-71
Material Description
Viton polymer blend
Elastomer polymer blend
Flexible polyolefin
Precoating No.
N/A
/164
/42 or /86
Adhesive Part No.**
S-1125
S-1124
S-1017 or S-1048
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
222F211
222F221
222F232
222F242
222F253
222F263
222F274
222F285
H
Min.
a
23.9 [.94]
27.2 [1.07]
31.0 [1.22]
35.6 [1.40]
38.9 [1.53]
45.2 [1.78]
51.6 [2.03]
62.7 [2.47]
J
Max.
b
9.9 [.39]
13.2 [.52]
18.5 [.73]
22.1 [.87]
28.2 [1.11]
32.3 [1.27]
41.1 [1.62]
42.9 [1.69]
Min.
a
17.3 [.68]
20.8 [.82]
24.4 [.96]
28.7 [1.13]
31.5 [1.24]
38.4 [1.51]
44.5 [1.75]
47.2 [1.86]
Max.
b
6.6 [.26]
7.6 [.30]
8.9 [.35]
10.2 [.40]
10.9 [.43]
12.7 [.50]
15.0 [.59]
17.5 [.69]
P
±10%
b
R
±10%
b
JO
±10%
b
105.2 [4.14]
124.0 [4.88]
146.3 [5.76]
172.2 [6.78]
185.2 [7.29]
213.6 [8.41]
224.5 [8.84]
227.3 [8.95]
18.5 [.73]
19.8 [.78]
20.8 [.82]
21.8 [.86]
24.4 [.96]
27.4 [1.08]
29.5 [1.16]
33.3 [1.31]
87.6 [3.45]
99.1 [3.90]
114.3 [4.50]
132.6 [5.22]
143.8 [5.66]
169.2 [6.66]
173.2 [6.82]
168.1 [6.62]
HW
+.06 to -.03
b
JW
±.03
b
1.52 [.06]
1.52 [.06]
1.78 [.07]
1.78 [.07]
1.78 [.07]
1.78 [.07]
1.78 [.07]
2.03 [.08]
1.52 [.06]
1.52 [.06]
1.52 [.06]
1.52 [.06]
1.52 [.06]
1.52 [.06]
1.78 [.07]
1.78 [.07]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-69
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
222K121 to 185
Right-Angled, Lipped Boot
As Supplied (a)
After Unrestricted Recovery (b)
For eyelet clip, order CS-1858 option.
Applications
Use in conjunction with
Raychem adapters to provide strain relief for harness
systems using circular
connectors. Boot is compatible with all Raychem
grooved adapters of the
appropriate shell size.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
222K121
222K132
222K142
222K152
222K163
222K174
222K185
H
Min.
- 3 ,- 4 ,- 2 5
-100
a
a
24.0 [.95] 24.0 [.95]
30.0 [1.18] 30.0 [1.18]
31.0 [1.22] 31.0 [1.22]
36.0 [1.42] 36.0 [1.42]
43.0 [1.69] 43.0 [1.69]
60.0 [2.36] 52.0 [2.05]
66.0 [2.60] 66.0 [2.60]
Max.
b
10.4 [.41]
14.2 [.56]
18.0 [.71]
22.4 [.88]
28.2 [1.11]
35.1 [1.38]
44.5 [1.75]
J
Min.
- 3 ,- 4 ,- 2 5
-100
a
a
24.0 [.95] 14.0 [.55]
30.0 [1.18] 15.0 [.59]
31.0 [1.22] 18.0 [.71]
36.0 [1.42] 21.0 [.83]
43.0 [1.69] 25.0 [.98]
60.0 [2.36] 39.0 [1.54]
66.0 [2.60] 42.0 [1.65]
Max.
b
P
±10%
b
R
±10%
b
JO
±10%
b
HW
±20%
b
JW
±20%
b
X
±20%
b
Y
±20%
b
5.6 [.22]
5.9 [.23]
7.1 [.28]
8.4 [.33]
9.9 [.39]
15.7 [.62]
16.8 [.66]
25.0 [.98]
32.0 [1.26]
39.0 [1.54]
46.0 [1.81]
55.0 [2.17]
80.0 [3.15]
108.0 [4.25]
25.0 [.98]
27.0 [1.06]
31.0 [1.22]
38.0 [1.50]
45.0 [1.77]
54.0 [2.13]
68.0 [2.68]
8.5 [.33]
8.5 [.33]
15.0 [.59]
18.0 [.63]
17.5 [.69]
32.0 [1.26]
48.0 [1.89]
1.3 [.05]
1.5 [.06]
1.8 [.07]
1.8 [.07]
2.0 [.08]
3.3 [.13]
3.8 [.15]
.41 [.016]
.61 [.024]
.81 [.032]
.81 [.032]
.81 [.032]
1.02 [.040]
1.63 [.064]
18.0 [.71]
18.0 [.71]
18.0 [.71]
25.0 [.98]
25.0 [.98]
25.0 [.98]
35.0 [1.38]
16.0 [.63]
20.0 [.79]
20.0 [.79]
25.0 [.98]
30.0 [1.18]
45.0 [1.77]
70.0 [2.76]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-70
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
234A011 to 071
D-Subminiature,
Right-Angled Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
234A011
234A021
234A032
234A042
234A052
234A061
234A071
J
K
±5%
a
±5%
b
±5%
a
±5%
b
Min.
a
Max.
b
P
±10%
b
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
20.3 [.80]
28.2 [1.11]
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
20.3 [.80]
28.2 [1.11]
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
10.7 [.42]
10.7 [.42]
7.9 [.31]
10.2 [.40]
14.0 [.55]
17.3 [.68]
19.1 [.75]
7.9 [.31]
10.2 [.40]
4.1 [.16]
5.3 [.21]
7.4 [.29]
8.6 [.34]
10.7 [.42]
3.8 [.15]
5.1 [.20]
25.9 [1.02]
30.7 [1.21]
42.9 [1.69]
53.3 [2.10]
55.9 [2.20]
25.9 [1.02]
30.7 [1.21]
Part
No.
R
±10%
b
21.6 [.85]
24.6 [.97]
27.9 [1.10]
30.5 [1.20]
32.3 [1.27]
18.5 [.73]
19.8 [.78]
W
±20%
b
X
±20%
b
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
This
Boot Fits
Cannon/
Cinch
DE-9
DA-15
DB-25
DC-37
DD-50
DE-9
DA-15
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 (.06) max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-71
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
234A111 to 152
D-Subminiature, Side-Entry
Boot
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
Materials Available
Material*
-3
-4
-25
Material Description
Semirigid polyolefin
Flexible polyolefin
Fluid-resistant elastomer
Precoating No.
/42 or /86
/42 or /86
/42 or /86 or /225
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1017 or S-1048 or S-1125
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
234A111
234A121
234A132
234A142
234A152
H
±5%
a
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
J
±5%
b
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
±5%
a
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
K
±5%
b
10.7 [.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
Min.
a
7.9 [.31]
10.2 [.40]
14.0 [.55]
17.3 [.68]
19.1 [.75]
Max.
b
4.1 [.16]
5.3 [.21]
6.4 [.25]
7.9 [.31]
9.1 [.36]
P
±10%
b
R
±10%
b
W
±20%
b
X
±20%
b
This
Boot Fits
Cannon/Cinch
27.9 [1.10]
35.1 [1.38]
47.5 [1.87]
59.7 [2.35]
63.2 [2.49]
18.5 [.73]
18.8 [.74]
20.1 [.79]
20.1 [.79]
26.4 [1.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
DE-9
DA-15
DB-25
DC-37
DD-50
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-72
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
234A611 to 671
D-Subminiature,
90° End-Entry Boot
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
Materials Available
Material*
-3
-4
-25
Material Description
Semirigid polyolefin
Flexible polyolefin
Fluid-resistant elastomer
Precoating No.
/42 or /86
/42 or /86
/42 or /86
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1017 or S-1048 or S-1125
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
234A611
234A621
234A632
234A642
234A652
234A661
234A671
H
±5%
a
16.0 [.63]
19.1 [.75]
29.2 [1.15]
34.3 [1.35]
37.6 [1.48]
16.0 [.63]
19.1 [.75]
±5%
b
20.3 [.80]
28.2 [1.11]
42.2 [1.66]
58.7 [2.31]
57.9 [2.28]
20.3 [.80]
28.2 [1.11]
J
±5%
a
16.0 [.63]
19.1 [.75]
29.2 [1.15]
34.3 [1.35]
37.6 [1.48]
16.0 [.63]
19.1 [.75]
±5%
b
10.7[.42]
10.7 [.42]
10.7 [.42]
10.7 [.42]
13.7 [.54]
10.7 [.42]
10.7 [.42]
K
Min.
Max.
a
b
16.0 [.63]
4.1 [.16]
19.1 [.75]
5.3 [.21]
29.2 [1.15]
7.4 [.29]
34.3 [1.35]
8.6 [.34]
37.6 [1.48] 10.7 [.42]
16.0 [.63]
3.8 [.15]
19.1 [.75]
5.1 [.20]
P
±10%
b
R
±10%
b
W
±20%
b
X
±20%
b
This
Boot Fits
Cannon/Cinch
25.9 [1.02]
30.7 [1.21]
42.9 [1.69]
53.3 [2.10]
55.9 [2.20]
25.9 [1.02]
30.7 [1.21]
21.6 [.85]
24.6 [.97]
27.9 [1.10]
30.5 [1.20]
32.3 [1.27]
18.5 [.73]
19.8 [.78]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
1.02 [.04]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
3.05 [.12]
DE-9
DA-15
DB-25
DC-37
DD-50
DE-9
DA-15
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-73
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Boots
242W042 to 63
45° Angled Boot
As Supplied (a)
H Dia.
J Dia.
Applications
Designed for use in the
aggressive environments
found adjacent to engines
in automotive, aerospace
and military applications,
heat-shrinkable molded
parts provide rugged protection, strain relief and a
full 360°environmental seal.
The introduction of the 45°
option means there is now a
choice of three routes to the
connector for closer positioning and greater design
freedom.
After Unrestricted Recovery (b)
J Dia.
JO
P
W Typ.
135˚
S
T
U
H Dia.
Compatibility Chart
Material Dash Number
Material Description
-3
Polyolefin, semirigid
-4
Polyolefin, flexible
-25
Elastomer, fluid-resistant
-130
Polyolefin, commercial flexible
-12
Viton
-100
Polyolefin, Zerohal
Precoating No.
/42, /86
/42, /86
/42, /86, /225
/42, /86
N/A
/180
Adhesive Part No.
S-1017 or S-1048
S-1017 or S-1048
S-1017, S-1125 or S-1048
S-1017 or S-1048
S-1255-04
S-1030
Product Dimensions
H
J
Part
No.
Min.
a
-12, -10
Max.
b
3, -25
Min.
a
-12, -100
a
-3, -25
242W042
242W053
242W063
31.0 [1.22]
36.0 [1.42]
43.0 [1.69]
7.9 [.31]
2.1 [.08]
7.9 [.31]
18.0 [.71]
21.0 [.83]
25.0 [.99]
31.0 [1.22]
36.0 [1.42]
43.0 [1.69]
Max.
b
-12, -100,
-3, -25
7.0 [.28]
8.4 [.33]
9.9 [.39]
P
± 10%
b
S
± 10%
b
T
± 10%
b
U
± 10%
b
JO
± 10%
b
W
± 20%
b
55.0 [2.17]
60.0 [2.36]
65.0 [2.56]
35.0 [1.38]
40.0 [1.58]
45.0 [1.77]
3.5 [.14]
3.5 [.14]
3.5 [.14]
2.0 [.08]
2.0 [.08]
2.0 [.08]
25.0 [.98]
30.0 [1.18]
35.0 [1.38]
1.8 [.07]
2.0 [.08]
2.2 [.09]
As supplied dimensions are for uncoated parts, when coating is added, entry diameters will reduce by 1.5 [.06] max.
Ordering Information
Available in:
Americas
Europe
Asia Pacific
■
■
■
4-74
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Feedthroughs
207W213 to 256
Two-Part Feedthrough
After Unrestricted Recovery (b)
As Supplied (a)
4
Applications
Use for strain relief and
abrasion protection when
cables pass through equipment boxes or panels.
Materials Available
Material Dash Number
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/180
Adhesive Part No.
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
H
Ref.
b
207W213
207W223
207W234
207W245
207W256
11.9 [.47]
20.1 [.79]
30.1 [1.22]
45.0 [1.77]
68.1 [2.68]
J
Min.
- 3 ,- 4 ,- 1 2 ,
Max.
-100
-25
b
a
a
9.9 [.39] 8.5 [.33] 4.1 [.16]
18.0 [.71] 16.5 [.65] 7.1 [.28]
27.9 [1.10] 26.5 [1.04] 11.9 [.47]
41.9 [1.65] 40.5 [1.59] 18.0 [.71]
64.0 [2.52] 64.5 [2.54] 30.0 [1.18]
JO
Max.
b
M
Thread
b
P
±10%
b
15.2 [.60]
19.3 [.76]
26.9 [1.06]
32.0 [1.26]
39.1 [1.54]
20.1 [.79]
30.0 [1.18]
41.9 [1.65]
55.9 [2.20]
80.0 [3.15]
62.0 [2.44]
71.9 [2.83]
87.1 [3.43]
102.1 [4.02]
121.9 [4.80]
R
±10%
b
49.0 [1.93]
58.9 [2.32]
73.9 [2.91]
88.9 [3.50]
109.0 [4.29]
S
±10%
b
U
±10%
b
JW
±20%
b
Hole
Dia.
±.51 (.02]
13.0 [.51]
16.0 [.63]
18.0 [.71]
18.0 [.71]
18.0 [.71]
9.9 [.39]
9.9 [.39]
9.9 [.39]
9.9 [.39]
9.9 [.39]
1.3 [.05]
1.8 [.07]
2.03 [.08]
3.05 [.12]
3.05 [.12]
23.9 [.94]
34.0 [1.34]
47.0 [1.85]
60.5 [2.38]
85.1 [3.35]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
4-75
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
301A011 to 048
T Transition
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material Dash Number
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86, /180
Adhesive Part No.
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
301A011
301A022
301A028
301A034
301A048
H, J & K
Min.
Max.
a
b
6.6 [.26]
3.6 [.14]
13.2 [.52]
6.9 [.27]
20.0 [0.79]
10.2 [.40]
26.9 [1.06]
13.5 [.53]
55.6 [2.19]
30.2 [1.19]
P
±10%
b
S
±10%
b
T
±10%
b
29.7 [1.17]
58.7 [2.31]
90 [3.54]
120.1 [4.73]
246.4 [9.70]
15.1 [.59]
29.5 [1.16]
45 [1.77]
60.2 [2.37]
123.2 [4.85]
—
17.5 [.69]
30 [1.18]
35.6 [1.40]
70.9 [2.79]
W
±30%
b
1.02 [.04]
1.52 [.06]
2.0 [.08]
2.29 [.09]
3.05 [.12]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
4-76
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
301A511 to 514
Slimline T Transition
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material Dash Number
-50
-51
-71
-125
Material Description
Viton polymer blend
Elastomer polymer blend
Flexible polyolefin
Fluoropolymer
Precoating No.
N/A
/164
/42 or /86
N/A
Adhesive Part No.
S-1125
S-1124
S-1017 or S-1048
S-1255-04
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
301A511
301A512
301A513
301A514*
H
Min.
a
19.8 [.78]
34.3 [1.35]
60.2 [2.37]
83.3 [3.28]
Max.
b
6.6 [.26]
11.4 [.45]
20.1 [.79]
33.3 [1.31]
J&K
Min.
Max.
a
b
13.2 [.52]
6.6 [.26]
22.9 [.90]
11.4 [.45]
40.1 [1.58]
20.1 [.79]
54.9 [2.16]
33.3 [1.31]
HO, JO, & KO
±10%
b
W
Nom.
b
P
Nom.
b
25.4 [1.00]
41.1 [1.62]
63.5 [2.50]
88.9 [3.50]
1.02 [.04]
1.27 [.05]
1.52 [.06]
1.78 [.07]
80.8 [3.18]
120.4 [4.74]
175.8 [6.92]
242.3 [9.54]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
*301A514 is not available in -125 Fluoropolymer material.
4-77
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
322A112 to 158
T Transition
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material Dash Number
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Modified elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
-100
Adhesive Part No.
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
322A112
322A123
322A134
322A148
322A158
H&J
Min.
a
13.2 [.52]
26.9 [1.06]
26.9 [1.06]
55.6 [2.19]
55.6 [2.19]
K
Max.
b
5.8 [.23]
12.4 [.49]
12.7 [.50]
25.4 [1.00]
25.4 [1.00]
Min.
a
6.6 [.26]
6.6 [.26]
13.2 [.52]
13.2 [.52]
26.9 [1.06]
Max.
b
3.0 [.12]
3.0 [.12]
5.8 [.23]
5.8 [.23]
12.4 [.49]
P
±10%
b
52.3 [2.06]
83.3 [3.28]
107.7 [4.24]
180.6 [7.11]
222.3 [8.75]
T
±10%
b
—
10.7 [.42]
20.3 [.80]
25.4 [1.00]
38.1 [1.50]
HW & W
±20%
b
1.52 [.06]
2.54 [.10]
2.54 [.10]
4.57 [.18]
4.57 [.18]
KW
±20%
b
1.02 [.04]
1.02 [.04]
1.52 [.06]
1.52 [.06]
2.54 [.10]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
4-78
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
342A012 to 058
45° Side-Breakout
Transition
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
-100
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
342A012
342A024
342A034
342A048
342A058
H&J
Min.
Max.
a
b
13.2 [.52]
6.9 [.27]
26.9 [1.06]
12.7 [.50]
26.9 [1.06]
13.7 [.54]
55.6 [2.19]
26.9 [1.06]
55.6 [2.19]
26.9 [1.06]
K
Min.
a
6.6 [.26]
6.6 [.26]
13.2 [.52]
13.2 [.52]
26.9 [1.06]
Max.
b
3.6 [.14]
3.6 [.14]
6.1 [.24]
6.9 [.27]
13.7 [.54]
P
±10%
b
T
±10%
b
U
±10%
b
HW & JW
±20%
b
KW
±20%
b
49.3 [1.94]
92.5 [3.64]
144.8 [5.70]
184.9 [7.28]
203.5 [8.01]
19.6 [.77]
31.8 [1.25]
50.8 [2.00]
63.5 [2.50]
66.0 [2.60]
19.6 [.77]
39.6 [1.56]
50.8 [2.00]
63.5 [2.50]
66.0 [2.60]
1.52 [.06]
2.54 [.10]
2.54 [.10]
4.57 [.18]
4.57 [.18]
1.02 [.04]
1.02 [.04]
1.52 [.06]
1.52 [.06]
2.54 [.10]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
4-79
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
362A014 to 114
30° Side-Breakout
Transition
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
/86 or /180
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H&J
K
P
S
Min.
Max.
±10%
±10%
Min.
Max.
a
b
b
b
a
b
362A014 30.5 [1.20] 15.7 [.62] 20.3 [.80] 10.7 [.42] 82.6 [3.25] 31.8 [1.25]
362A024 35.6 [1.40] 18.3 [.72] 15.2 [.60] 8.6 [.34] 63.5 [2.50] 19.1 [.75]
362A114 35.6 [1.40] 18.8 [.74] 10.2 [.40] 5.3 [.21] 61.0 [2.40] 19.1 [.75]
Part
No.
T
±10%
b
21.1 [.63]
22.4 [.88]
21.3 [.84]
HW & JW
±20%
b
KW
±20%
b
2.54 [.10] 1.78 [.07]
2.54 [.10] 1.52 [.06]
2.79 [.11] 1.52 [.06]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
4-80
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
381A301 to 304
Slimline Y Transition
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-50
-51
-71
-125
Material Description
Viton polymer blend
Elastomer polymer blend
Flexible polyolefin
Fluoropolymer
Precoating No.
N/A
/164
/42 or /86
—
Adhesive Part No.**
S-1125
S-1124
S-1017 or S-1048
S-1255-04
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
381A301
381A302
381A303
381A304*
H
Min.
a
19.8 [.78]
34.3 [1.35]
60.2 [2.37]
83.3 [3.28]
Max.
b
6.6 [.26]
11.4 [.45]
20.1 [.79]
33.3 [1.31]
J&K
Min.
Max.
a
b
13.2 [.52]
6.6 [.26]
22.9 [.90]
11.4 [.45]
40.1 [1.58]
20.1[.79]
54.9 [2.16]
33.3 [1.31]
W
Nom.
b
1.0 [.04]
1.3 [.05]
1.5 [.06]
1.8 [.07]
P
Nom.
b
40.6 [1.60]
63.0 [2.48]
94.7 [3.73]
133.9 [5.27]
R&S
Nom.
b
40.6 [1.60]
63.0 [2.48]
94.7 [3.73]
133.9 [5.27]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
*381A304 is not available in -125 Fluoropolymer material.
4-81
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
382A012 to 046
Y Transition
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
-100
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
Part
No.
382A012
382A023
382A034
382A046
Min.
a
13.2 [.52]
26.9 [1.06]
38.6 [1.52]
55.6 [2.19]
Max.
b
6.1 [.24]
12.4 [.49]
18.0 [.71]
25.9 [1.02]
J&K
S
±10%
Min.
Max.
b
a
b
6.6 [.26]
3.3 [.13] 23.9 [.94]
13.2 [.52]
6.1 [.24] 53.3 [2.10]
26.9 [1.06] 12.4 [.49] 78.7 [3.10]
26.9 [1.06] 12.7 [.50] 111.8 [4.40]
T
±10%
b
HW
±20%
b
JW & KW
±20%
b
15.5 [.61]
33.0 [1.30]
55.9 [2.20]
71.1 [2.80]
1.52 [.06]
2.54 [.10]
3.05 [.12]
4.57 [.18]
1.02 [.04]
1.52 [.06]
2.54 [.10]
2.54 [.10]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
4-82
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
382C312, 322 and 332
Slimline Y Transition
As Supplied (a)
After Unrestricted Recovery (b)
J Dia.
R Tan JO
P
Tan
HO
H Dia.
W Typ.
After Unrestricted Recovery (b)
S
Tan KO
K Dia.
382C322, 382C332
4
382312
Applications
Provides strain relief and
mechanical protection at
two into one Y junctions in
cable harness assemblies.
Materials Available
Material
-50
-51
-71
-125
Material Description
Viton polymer blend
Elastomer polymer blend
Flexible polyolefin
Fluoropolymer
Product Dimensions
Part
No.
382C312
Part
No.
382C322
Part
No.
382C332
When used with adhesive
it provides environmental
sealing. These parts are
based on the 382A3 range.
They have the branched
H
Min.
a
1.20
[30.5]
Min.
a
.90
[22.9]
Max.
b
.45
[11.4]
Max.
b
.45
[11.4]
H
Min.
a
.90
[22.9]
H
Min.
a
1.00
[25.4]
Precoating No.
N/A
/164
/42 or /86
N/A
J
Max.
b
.45
[11.4]
K
Max.
b
.45
[11.4]
outlet(s) reduced in size to
accommodate smaller
cable diameters without the
need for packing or
shimming.
Adhesive Part No.
S-1125
S-1124
S-1017 or S-1048
S-1255-04
KO HO & JO
±15%
±15%
b
b
W
Nom
b
2.48
[63.0]
.85
[21.6]
.04
[1.0]
HO
±15%
b
JO & KO
±15%
b
W
Nom.
b
2.48
[63.0]
1.62
[41.1]
.85
[21.6]
.04
[1.0]
P, R & S
Nom.
b
HO
±15%
b
JO & KO
±15%
b
W
Nom.
b
2.48
[63.0]
1.62
[41.1]
.85
[21.6]
.04
[1.0]
Min.
a
.60
[15.2]
Max.
b
.30
[7.6]
J&K
Min.
Max.
a
b
.40
.20
[10.2]
[5.1]
P, R & S
Nom.
b
J&K
Min.
Max.
a
b
.60
.30
[15.2]
[7.5]
P, R & S
Nom.
b
1.62
[41.1]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
4-83
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
462A011 to 060
Transition, One to Three
Cables
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
-100
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
462A011
462A023
462A034
462A046
462A060
Part
No.
462A011
462A023
462A034
462A046
462A060
H
J, K&L
Min.
a
13.2 [.52]
26.9 [1.06]
38.6 [1.52]
55.6 [2.19]
91.4 [3.60]
Max.
b
6.6 [.26]
13.2 [.52]
18.8 [.74]
25.4 [1.00]
54.6 [2.15]
Min.
a
6.6 [.26]
13.2 [.52]
19.3 [.76]
26.9 [1.06]
45.7 [1.80]
Max.
b
3.6 [.14]
6.9 [.27]
9.7 [.38]
12.4 [.49]
27.4 [1.08]
T
±10%
b
30.5 [1.20]
57.2 [2.25]
88.9 [3.50]
121.9 [4.80]
254.0 [10.00]
U
±10%
b
15.7 [.62]
33.0 [1.30]
45.7 [1.80]
71.1 [2.80]
127.0 [5.00]
HW
±20%
b
1.52 [.06]
2.54 [.10]
3.05 [.12]
4.57 [.18]
7.11 [.28]
KW
±10%
b
1.02 [.04]
1.52 [.06]
1.78 [.07]
3.05 [.12]
4.57 [.18]
P
±10%
b
46.2 [1.82]
93.2 [3.67]
135.1 [5.32]
192.0 [7.56]
390.4 [15.37]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
4-84
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
462A421 to 424
Slimline Transition, One to
Three Cables
As Supplied (a)
After Unrestricted Recovery (b)
4
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-50
-51
-71
Material Description
Viton polymer blend
Elastomer polymer blend
Flexible polyolefin
Product Dimensions
Part
No.
462A421
462A422
462A423
462A424
Materials Available
H
Min.
a
19.8 [.78]
34.3 [1.35]
60.2 [2.37]
99.8 [3.93]
Material*
-125
Max.
b
6.6 [.26]
11.4 [.45]
20.1 [.79]
33.3 [1.31]
Precoating No.
N/A
/164
/42 or /86
J, K & L
Min.
Max.
a
b
13.2 [.52]
6.6 [.26]
20.6 [.81]
11.4 [.45]
36.1 [1.42]
20.1 [.79]
54.9 [2.16]
33.3 [1.31]
Material Description
Fluoropolymer
Adhesive Part No.**
S-1125
S-1124
S-1017 or S-1048
W
Nom.
b
P
Nom.
b
R, S & T
Nom.
b
1.0 [.04]
1.3 [.05]
1.5 [.06]
1.8 [.07]
85.9 [3.38]
135.6 [5.34]
207.3 [8.16]
207.2 [8.16]
42.9 [1.69]
67.8 [2.67]
103.6 [4.08]
103.6 [4.08]
Precoating No.
—
Adhesive Part No.**
S-1255-04
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
H
J, K & L
W
P
R, S & T
Nom.
Nom.
Nom.
Min.
Max.
Min.
Max.
b
b
b
a
b
a
b
462A421 19.8 [.78]
6.6 [.26]
13.2 [.52]
6.6 [.26]
1.0 [.04]
85.9 [3.38]
42.9 [1.69]
462A422 34.3 [1.35]
11.4 [.45]
20.6 [.81]
11.4 [.45]
1.3 [.05]
135.6 [5.34]
67.8 [2.67]
462A423 60.2 [2.37]
20.1 [.79]
36.1 [1.42]
20.1 [.79]
1.5 [.06]
207.3 [8.16] 103.6 [4.08]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
Part
No.
4-85
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
562A011 to 067
Transition, One to Four
Cables
As Supplied (a)
After Unrestricted Recovery (b)
Applications
Provides strain relief and
mechanical protection on
cable harness assemblies.
Materials Available
Material*
-3
-4
-12
-25
-100
Material Description
Semirigid polyolefin
Flexible polyolefin
Viton
Fluid-resistant elastomer
Polyolefin, Zerohal
Precoating No.
/42 or /86
/42 or /86
N/A
/42 or /86 or /225
-100
Adhesive Part No.**
S-1017 or S-1048
S-1017 or S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
Product Dimensions
Part
No.
562A011
562A022
562A032
562A043
562A054
562A067
H
Min.
a
13.2 [.52]
19.3 [.76]
19.3 [.76]
26.9 [1.06]
38.6 [1.52]
55.6 [2.19]
Max.
b
6.9 [.27]
9.7 [.38]
9.7 [.38]
13.0 [.51]
18.5 [.73]
26.7 [1.05]
J, K, L & N
Min.
Max.
a
b
6.6 [.26]
3.4 [.14]
9.4 [.37]
5.3 [.21]
13.2 [.52]
6.9 [.27]
13.2 [.52]
6.9 [.27]
19.3 [.76]
9.7 [.38]
26.9 [1.06]
13.0 [.51]
P
±10%
b
24.1 [.95]
35.6 [1.40]
49.3 [1.94]
49.3 [1.94]
71.9 [2.83]
101.6 [4.00]
T
±10%
b
43.9 [1.73]
43.2 [1.70]
50.5 [1.99]
65.8 [2.59]
95.3 [3.75]
135.1 [5.32]
U
±10%
b
18.0 [.71]
23.1 [.91]
25.4 [1.00]
33.5 [1.32]
46.5 [1.83]
65.5 [2.58]
HW
±20%
b
1.52 [.06]
1.78 [.07]
1.78 [.07]
2.54 [.10]
3.05 [.12]
4.57 [.18]
W
±20%
b
1.02 [.04]
1.02 [.04]
1.52 [.06]
1.52 [.06]
1.78 [.07]
2.54 [.10]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by
1.5 [.06] max.
4-86
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
QFT
Configurable Heat-Shrink
Transition
Product Facts
Configurable heat-shrink
transition
■ Low cost commercial
polyolefin
■ 80°C [176°F] shrink
temperature
■ High shrink ratio
■ Specially engineered
easy-to-use crimp tool
■
4
Expanded
Recovered
Applications
QFT heat-shrinkable transitions form a watertight seal
protecting cable splices
from corrosion and mechanical abuse while providing
excellent electrical insulating
properties. QFT products
use special crimps that allow
Operating Temperature Range
them to be employed as
1:2, 1:3, and even 1:4 transitions. With their high shrink
ratio and crimps the configurable QFT product line can
accommodate almost all of
your transition needs with
only 3 product sizes.
-20°C to 70°C
[-4°F to 158°F]
Specifications/Approvals
Raychem
RW 2008
Temperature Ratings
Operating temperature range
Minimum recovery temperature
Maximum storage temperature
-20°C to 70°C [-4°F to 158°F] (125°C [257°F] without sealant)
55°C [131°F]
40°C [104°F]
Dimensions Table
QFT1
QFT2
QFT3
H
Min.
Max.
31.0 [1.22] 9.0 [.35]
43.0 [1.69] 14.0 [.55]
57.0 [2.24] 24.0 [.95]
J
Min.
31.0 [1.22]
43.0 [1.69]
57.0 [2.24]
Max.
4.4 [.17]
7.0 [.28]
12.0 [.47]
P
+/- 10%
JO
+/- 10%
HW
+/- 20%
JW
+/- 20%
60.0 [2.36]
75.0 [2.95]
90.0 [3.53]
12.0 [.47]
18.0 [.71]
25.0 [.98]
1.5 [.06]
1.8 [.07]
1.8 [.07]
1.0 [.039]
1.0 [.039]
1.0 [.039]
4-87
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
QFT (Continued)
Typical QFT Performance
Physical
Electrical
Chemical
Property
Tensile strength
Ultimate elongation
Longitudinal change
Specific gravity
Heat aging
168 hours at 120°C [248°F]
Heat shock
4 hours at 105°C
Dielectric strength
Fluid resistance 1
Engine Oil
Hydraulic Fluid
Tensile Strength
Ultimate Elongation
Fluid resistance 2
Automotive gasoline
Diesel fuel
Cleaning fluid
Antifreeze
Engine cleaning fluid
Tensile strength
Ultimate elongation
Performance
10 MPa (1500psi) minimum
250% minimum
0 to -20% maximum
1.4 maximum
Minimum 200% ultimate elongation
Tensile Strength 10 MPa min.
Test method
ISO 37
ISO 37
ISO 1183
ISO 1183
ISO 188
ISO 37
No cracking, dripping or flowing
ASTM D 2671
8MV/m minimum
(24 +/- 2h immersion at 23C+/- 2C)
(SAE 20W/50)
IEC 243-1
ISO 1817
—
10 MPa minimum
200% minimum
(30 +/- 3m immersion at 23C+/- 2C)
(BS 4040)
(BS 2869)
(TL6850-07)
(Ethylene Glycol/Water 50/50 v/v)
(Gunk)
10 MPa minimum
200% minimum
ISO 37
—
ISO 1817
—
—
—
—
ISO 37
—
Part Numbering System
*Available in bulk pack, part number QFT3-130/42-0-B500 (US and UK).
Ordering Information
Color
Standard
Code
Standard
Packaging
Crimp tool
Bulk pack
QFT-Crimp-Tool-Manual (069172-000)
Black (-0)
0
10 pieces per bag, 30 clips
500 pieces per box and 500 clips per bag
(clips ordered separately)
- contact Tyco Electronics for details
—
4-88
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
SSB, T, F to 8S
Chem-X Heavy Duty
Breakout Boots
Product Facts
Watertight
■ Easy installation, requiring
no special skills
■ Compatibility with
polyethylene, PVC, lead,
steel, aluminum, standard
Navy cable jackets, and
copper wire and cable
■ Four configurations and
twelve sizes
■ Minimum shrink
temperature of 121°C
[250°F]
■ Type approval by:
- ABS (American Bureau of
Shipping)
- DNV (Det Norske Veritas)
- Lloyd’s (Lloyd’s Register of
Shipping)
■
4
Applications
These flame-retardant heatshrinkable transitions are
especially designed for
shipboard applications and
meet or exceed all of the
U.S. Navy specifications
described in MIL-I-81765/1A
(as of 5/02). The transitions
are made of a rugged, thermally stabilized, modified
polyolefin and factory-
coated with a thermoplastic
adhesive sealant. As a
result, they offer excellent
water sealing, mechanical
abrasion-protection,
corrosion-resistance, weatherproofing, and electrical
insulation. The transitions
replace tapes, epoxies,
and grease in applications
involving cable breakouts,
transitions, and terminations.
4-89
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Transitions
SSB, T, F to 8S (Continued)
Specifications/Approvals
Product Dimensions
Commercial
RW-2024
Description
SSB-1202 FR
SSB-2002 FR
D3-9 FR
D14-30 FR
D50-100 FR
D200-400 FR
T3-9 FR
T14-23 FR
T14-50 FR
T42-100 FR
T150-300 FR
T400 FR
T500-600 FR
F3-9 FR
F-23 FR
F42-60 FR
F75-100 FR
F133-200 FR
F150-400 FR
6S100-200 FR
8S23-75 FR
8S14-50 FR
8S42-100 FR
Military
MIL-STD-2003
MIL-I-81765/1A
Number
of Legs
2
2
2
2
2
2
3
3
3
3
3
3
3
4
4
4
4
4
4
6
8
8
8
ID Base
Min. Exp.
Max. Rec.
40.64[1.60] 11.43 [0.45]
50.8[2.00] 35.56[1.40]
20.32[0.80]
9.39[0.37]
30.48[1.2]
15.24[0.6]
48.26[1.9]
22.86[0.9]
76.2[3]
38.1[1.5]
22.86[0.9]
9.14[0.36]
30.48[1.2] 17.78[0.70]
38.1[1.5]
12.7[0.5]
43.18[1.7]
22.86[0.9]
60.96[2.4]
35.56[1.4]
81.28[3.2]
50.8[2]
124.46[4.90] 58.93[2.32]
22.86[0.9] 10.92[0.43]
31.75[1.25]
20.32[0.8]
44.45[1.75]
25.4[1]
59.69[2.35]
25.4[1]
67.31[2.65]
35.56[1.4]
133.35[5.25]
76.2[3]
60.96[2.4] 36.83[1.45]
35.56[1.4] 21.59[0.85]
57.15[2.25] 21.59[0.85]
63.50[2.50] 21.59[0.85]
ID legs
Min. Exp.
Min. Rec.
13.97[0.55]
3.81[0.15]
19.05[0.75]
8.89[0.35]
8.38[0.33]
2.79[0.11]
12.7[0.5]
4.32[0.17]
19.05[0.75]
7.62[0.3]
36.83[1.45]
12.7[0.5]
8.38[0.33]
2.29[0.09]
12.70[0.5]
4.57[0.18]
16.51[0.65]
4.06[0.16]
20.32[0.8]
4.83[0.19]
30.48[1.25]
12.70[0.5]
35.56[1.4]
17.78[0.7]
50.8[2]
22.86[0.9]
7.11[0.28]
2.79[0.11]
12.7[0.5]
5.08[0.2]
20.32[0.8]
8.13[0.32]
25.4[1]
8.89[0.35]
30.48[1.2]
10.92[0.43]
34.29[1.35]
13.97[0.55]
20.32[0.8]
8.89[0.35]
10.16[0.4]
3.3[0.13]
14.22[0.56]
3.3[0.13]
22.1[0.87]
3.3[0.13]
Leg
36.83[1.45]
69.85[2.75]
17.78[0.7]
25.4[1]
30.48[1.2]
38.1[1.5]
19.05[0.75]
25.4[1]
30.48[1.2]
30.48[1.25]
40.6[1.6]
40.6[1.6]
50.8[2]
19.05[0.75]
27.94[1.1]
30.48[1.25]
43.18[1.7]
38.1[1.5]
76.2[3]
69.85[2.75]
30.48[1.25]
30.48[1.25]
30.48[1.25]
Length
Body
62.23[2.45]
88.90[3.50]
50.8[2]
63.5[2.5]
76.2[3]
88.9[3.5]
50.80[2.0]
60.96[2.40]
76.2[2.3]
57.15[2.25]
88.90[3.50]
88.9[3.5]
187.96[7.40]
50.8[2]
63.50[2.50]
63.50[2.50]
165.1[6.5]
91.44[3.6]
152.4[6]
86.36[3.4]
50.8[2]
50.8[2]
50.8[2]
4-90
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
202W302 to 342
Heat-Shrink Bobbins
Product Facts
Fast installation
Temperature range of -40°C
to 105°C [-40°F to 221°F]
■ Fits range of diameters
■ Low cost, high volume
installation
■ Shrinks onto hose/pipe/ wire
harnesses
■ Good mechanical, thermal
and chemical properties
■ Good abrasion resistance
■ Excellent location,
cushioning and protection of
cable or hoses from P clips
and wire ties
■ Stays in place when heated.
■ Suits most hoses/pipes/wire
harnesses
■ No expensive tooling
required under body solution
■ Engine area solution
■
■
4
As Supplied (a)
After Unrestricted Recovery (b)
Square expanded = -130 material
Circular expanded = -12 and -25 material
-3, -4
4-91
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
202W302 to 342 (Continued)
Materials Available
Material
-3
-4
-12
-25
-130
Material Description
Polyolefin, semi-rigid
Polyolefin, flexible
Viton
Fluid resistant elastomer
Flexible polyolefin
Precoating No.
/42, /86
/42, /86
N/A
/86 or /225
/42, /86
Adhesive Part No.
S-1017, S-1048
S-1017, S-1048
S-1255-04
S-1017 or S-1048 or S-1125
S-1017
Product Dimensions
H
Part
No.
202W302
202W312
202W321
202W331
202W342
Min.
a
Max.
b
29.0 [1.142] 9.5 [.374]
39.0 [1.535] 12.7 [.500]
10.0 [.394]
3.0 [.118]
19.0 [.748]
6.4 [.252]
54.0 [2.126] 18.0 [.709]
J
Min.
a
P
±10%
b
R
±10%
b
S
±10%
b
T
±10%
b
W
±20%
b
29.0 [1.142]
39.0 [1.535]
10.0 [.394]
19.0 [.748]
54.0 [2.126]
35.0 [1.378]
35.0 [1.378]
29.0 [1.142]
29.0 [1.142]
35.0 [1.378]
25.0 [.984]
25.0 [.984]
23.0 [.906]
24.0 [.945]
25.0 [.984]
5.0 [.197]
5.0 [.197]
3.0 [.118]
2.5 [.098]
5.0 [.197]
3.0 [.118]
3.0 [.118]
3.0 [.118]
2.0 [.079]
3.0 [.118]
1.5 [.059]
2.0 [.079]
1.5 [.059]
1.5 [.059]
2.0 [.079]
Recommended
Hose Sizes
Min.
Max.
11.0 [.433]
14.0 [.551]
4.0 [.157]
8.0 [.315]
20.0 [.787]
25.0 [.984]
34.0 [1.339]
8.0 [.315]
17.0 [.669]
48.0 [1.889]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5
[.06] max.
4-92
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
400W242
Heat-Shrink Positioning
Ring
Product Facts
Easy to install
■ Close fit to hose/pipe
■ Fits range of diameters due
to high expansion
■ Low cost, high volume
installation
■ Shrinks onto hose/pipe
■ Minimum distance between
substrates
■ Good mechanical, thermal
and chemical properties
■ Push on fit to hose/pipe
■ Stays in place when
installed
■ No expensive tooling
required
■ Positions where needed
■ Keeps hoses/pipes together,
optimizing space
■ Under body solution
■ Engine area solution
■ Twinning two hoses/pipes
rationalizes part
descriptions
■ Hose/pipe can be orientated
correctly for ease of fitting to
vehicle
■
4
As Supplied (a)
-3, -4, -25, -100
-130
After Unrestricted Recovery (b)
4-93
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
400W242 (Continued)
Materials Available
Material
-3
-4
-25
-100
Material Description
Polyolefin, semi-rigid
Polyolefin, flexible
Elastomer, fluid resistant
Polyolefin, Zerohal
-130
Flexible polyolefin
Precoating no.
/42, /86
/42, /86
/86, /225
-100-CS1972
(S1030 tape supplied in bag)
/42, /86
Adhesive part no.
S-1017 or S-1048
S-1017 or S-1048
S-1017 or S-1048
S-1030
S-1017
As supplied dimensions are for uncoated parts, when coating is added, entry diameters will reduce by 1.5 [.06] max.
Part Numbering System
Product Dimensions
Part
No.
400W242
H
J
K
P
V
W
Y*
Z*
Max.
± 1.2
± 1.7
± 0.45
±1
±2
±2
Min.
Max.
b
b
b
b
b
a
a
a
b
28 [1.102] 10.2 [.402] 19.3 [.760] 12 [.472] 17 [.669] 7.0 [.276] 10 [.394] 29 [1.142] 25 [.984]
*Applicable for -130 only.
4-94
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
CES
Chem-X Heat-Shrinkable
Cable Entry Seals
Product Facts
Comes in many sizes and
configurations
■ Seals multicable openings
■ Meets or exceeds
MIL-I-81765/1A
■ Seals per U.S. Coast Guard
HQ 3774 in wet, dry, and
corrosive locations
■
4
Applications
Raychem Chem-X HeatShrinkable Cable-Entry
Seals (CESs) provide a
watertight, fume-tight seal
where cables enter connection boxes, bulkheads, or
other enclosures.
CESs are available in two
basic types: standard and
threaded. The standard
CES for thin-wall enclosures
consists of a three-part
assembly — a rigid plastic
nylon nut, an O-ring, and a
heat-shrinkable molded
area. The CES for threadedhole applications is a onepart assembly that combines
a tapered national pipe
thread (NPT) in rigid plastic
nylon with a heat-shrinkable
molded area.
All CESs are available with
the molded area configured
with one opening for a single wire or cable entry or
with two, three, or four legs
of equal size to seal multiple wires or cables at the
entry to enclosures and/or
bulkheads. To meet sealing
requirements, all CESs have
factory-applied adhesive
that provides the seal to
wire and cable jackets.
When armored cable is
being sealed it may be necessary to use additional
sealants, such as G.E. RTV
112 or Dow Corning RTV
732, to form the water seal.
4-95
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
CES (Continued)
Standard CES
Temperature
Temperature rating
Minimum shrink temperature
-55°C to 90°C [-67°F to 194°F]
121°C [250°F]
Specifications
Type
Molded heat-shrink nose
Adhesive
Raychem
RT-301
RW-2019
Product Dimensions
Part
No.
No.
of Legs
CES-1
CES-2
CES-3
CES-4
CES-4S*
CES-5
1
1
1
1
1
1
Overall Nom.
Recommended
Length
69.85 [2.75]
69.85 [2.75]
95.25 [3.75]
114.30 [4.50]
114.30 [4.50]
177.80 [7.00]
Min.
Expanded
I.D. Nose
12.70 [0.50]
19.05 [0.75]
28.45 [1.12]
40.64 [1.60]
50.80 [2.00]
69.85 [2.75]
Flame retardant polyolefin
Hot melt adhesive
Max.
Recovered
I.D. Nose
4.32 [0.17]
6.35 [0.25]
12.70 [0.50]
19.05 [0.75]
19.05 [0.75]
36.32 [1.43]
Max. I.D.
of Part
Drill
Size
19.05 [0.75]
19.05 [0.75]
27.94 [1.10]
39.62 [1.56]
53.34 [2.10]
73.66 [2.90]
25.40 [1.00]
25.40 [1.00]
35.05 [1.38]
50.80 [2.00]
59.94 [2.36]
88.90 [3.50]
Max.
O.D.
of Nut
35.81 [1.410]
35.81 [1.410]
48.31 [1.902]
69.09 [2.720]
85.09 [3.350]
103.38 [4.070]
*Part configuration may be different than depicted in figure. Contact Tyco Electronics for specification.
Breakout CES
Product Dimensions
Part
No.
Overall Nom.
No.
of Legs Recommended
Length
CES-2-D1A
CES-2-T1
CES-2-T1B
CES-2-F1A
CES-2-F1
CES-3-D1
CES-3-T1
CES-3-F1
CES-4-D3
CES-4-T1
CES-4-F1
CES-5-T4
CES-5-F4
2
3
3
4
4
2
3
4
2
3
4
3
4
69.85 [2.75]
69.85 [2.75]
88.90 [3.50]
69.85 [2.75]
88.90 [3.50]
88.90 [3.50]
88.90 [3.50]
88.90 [3.50]
101.60 [4.00]
101.60 [4.00]
101.60 [4.00]
127.00 [5.00]
127.00 [5.00]
Min.
Expanded
I.D.
(Each Leg)
15.24 [0.60]
10.16 [0.40]
15.24 [0.60]
10.16 [0.40]
15.24 [0.60]
15.24 [0.60]
15.24 [0.60]
15.24 [0.60]
22.86 [0.90]
22.86 [0.90]
22.86 [0.90]
31.75 [1.25]
31.75 [1.25]
Max.
Recovered
I.D.
(Each Leg)
2.79 [0.11]
2.79 [0.11]
4.32 [0.17]
2.79 [0.11]
4.32 [0.17]
4.32 [0.17]
4.32 [0.17]
4.32 [0.17]
7.62 [0.30]
7.62 [0.30]
7.62 [0.30]
12.70 [0.50]
12.70 [0.50]
Max. I.D.
of Part
Drill
Size
Max.
O.D.
of Nut
19.05 [0.75]
19.05 [0.75]
19.05 [0.75]
19.05 [0.75]
19.05 [0.75]
27.94 [1.10]
27.94 [1.10]
27.94 [1.10]
40.64 [1.60]
40.64 [1.60]
40.64 [1.60]
73.66 [2.90]
73.66 [2.90]
25.40 [1.00]
25.40 [1.00]
25.40 [1.00]
25.40 [1.00]
25.40 [1.00]
35.05 [1.38]
35.05 [1.38]
35.05 [1.38]
50.80 [2.00]
50.80 [2.00]
50.80 [2.00]
63.50 [2.50]
63.50 [2.50]
35.81 [1.41]
35.81 [1.41]
35.81 [1.41]
35.81 [1.41]
35.81 [1.41]
48.26 [1.90]
48.26 [1.90]
48.26 [1.90]
69.09 [2.72]
69.09 [2.72]
69.09 [2.72]
103.38 [4.07]
103.38 [4.07]
4-96
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accesories
CES (Continued)
Threaded CES
Overall Nom.
Min.
Max.
Recommended
Expanded
Recovered
Length
I.D. Nose
I.D. Nose
CES-2-A50
83.82 [3.30]
19.05 [0.75]
6.35 [0.25]
CES-2-A75
83.82 [3.30]
19.05 [0.75]
6.35 [0.25]
CES-2-A100
83.82 [3.30]
19.05 [0.75]
6.35 [0.25]
CES-3-A100
111.00 [4.37]
28.45 [1.12]
12.70 [0.50]
CES-3-A150
117.35 [4.62]
28.45 [1.12]
12.70 [0.50]
CES-4A-A150*
127.00 [5.00]
50.80 [2.00]
19.05 [0.75]
CES-5-A250*
152.40 [6.00]
69.85 [2.75]
25.40 [1.00]
* Not illustrated - refer to Specification Control Drawing for detals.
Part
No.
National
Adapter
I.D.
12.70 [0.50]
19.05 [0.75]
19.05 [0.75]
25.40 [1.00]
27.94 [1.10]
35.56 [1.40]
60.96 [2.40]
Pipe
Thread
Size
1/2–14
3/4–14
1–11 1/2
1–11 1/2
1 1/2–11 1/2
1 1/2–11 1/2
2 1/2–10
4
Threaded Breakout CES
Product Dimensions
Part
No.
No.
of Legs
Overall Nom.
Recommended
Length
CES-2A-T1
CES-2A-F1
CES-2A-D1
CES-2A-T2
CES-2A-F2
CES-3A-D1
CES-2A-T3
CES-3A-F1
CES-3A-D2
CES-3A-T2
CES-3A-F2
CES-4A-D3
CES-4A-T3
CES-4A-F3
3
4
2
3
4
2
3
4
2
3
4
2
3
4
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
95.25 [3.75]
Min.
Expanded
I.D.
(Each Leg)
10.16 [0.4]
10.16 [0.4]
15.24 [0.6]
10.16 [0.4]
10.16 [0.4]
15.24 [0.6]
15.24 [0.6]
15.24 [0.6]
15.24 [0.6]
15.24 [0.6]
15.24 [0.6]
22.86 [0.9]
22.86 [0.9]
22.86 [0.9]
Max.
Recovered
I.D.
(Each Leg)
2.79 [0.11]
2.79 [0.11]
2.79 [0.11]
2.79 [0.11]
2.79 [0.11]
4.32 [0.17]
4.32 [0.17]
4.32 [0.17]
4.32 [0.17]
4.32 [0.17]
4.32 [0.17]
7.62 [0.30]
7.62 [0.30]
7.62 [0.30]
Max. I.D.
of Part
Pipe Thread
Size (NPT)
12.70 [0.50]
12.70 [0.50]
19.05 [0.75]
19.05 [0.75]
19.05 [0.75]
25.40 [1.00]
25.40 [1.00]
25.40 [1.00]
27.94 [1.10]
27.94 [1.10]
27.94 [1.10]
37.34 [1.47]
37.34 [1.47]
37.34 [1.47]
1/2–14
1/2–14
3/4–14
3/4–14
3/4–14
1–11 1/2
1–11 1/2
1–11 1/2
1 1/2–11 1/2
1 1/2–11 1/2
1 1/2–11 1/2
1 1/2–11 1/2
1 1/2–11 1/2
1 1/2–11 1/2
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added,
entry diameters will be reduced by 1.5 [.06] max.
4-97
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
CES (Continued)
Right-Angle Threaded CES
A
C
D
B
Part
No.
Min. Exp. ID
Max. Rec. ID
ID Min
CES-2R-A50
CES-2R-A75
CES-3R-A100
CES-3R-A150
13.97 [0.55]
19.05 [0.75]
27.94 [1.10]
40.64 [1.60]
7.11 [0.28]
8.38 [0.33]
9.65 [0.38]
15.75 [0.62]
12.70 [0.50]
19.05 [0.75]
25.40 [1.00]
27.94 [1.10]
Length
D
A
35.56 [1.4]
25.40 [1.00]
43.18 [1.7]
27.94 [1.10]
53.34 [2.1]
33.78 [1.33]
78.74 [3.1]
39.62 [1.56]
NPT
Size
1/2-14
3/4-14
1-11 1/2
1 1/2-11 1/2
Right-Angle Breakout CES
A
C
D
B
Part
No.
Min. Exp. ID
Max. Rec. ID
ID Min
CES-1R
CES-2R
CES-3R
CES-4R
13.97 [0.55]
19.05 [0.75]
27.94 [1.10]
40.64 [1.60]
7.11 [0.28]
8.38 [0.33]
9.65 [0.38]
15.75 [0.62]
12.70 [0.50]
19.05 [0.75]
27.94 [1.10]
40.64 [1.60]
Length
D
A
35.56 [1.4]
42.67 [1.68]
43.18 [1.7]
44.96 [1.77]
53.34 [2.1]
58.42 [2.30]
78.74 [3.1]
71.12 [2.80]
Drill
Size
25.40 [1.00]
25.40 [1.00]
34.80 [1.37]
50.80 [2.00]
4-98
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
RayOLOn Kits
Roll-On Sealing Sleeve
Product Facts
A Raychem heatless sealing
solution
■ Re-useable sealing solution
■ Roll-on to seal, roll-off to
re-enter
■ Enhanced sealing with
gel strips
■ Protection of connectors
and splices against
corrosion
■ Available in many
conveniently packaged kits
■
4
Applications
RayOLOn re-useable roll-on
sealing sleeves are a family
of products designed to
protect connectors, electrical cable splices, and other
cylindrical substrates from
harsh environmental elements like salt spray and
water moisture. RayOLOn
sleeves are a part of
Raychem’s “heatless” sealing products that require no
heat guns or torches. This is
useful in the areas where
the use of motorized heat
sources or open flames are
prohibited or undesirable.
RayOLOn sealing sleeves
provide the sealing of the
substrates by simply rolling
the sleeve over the area to
be protected. If the substrate requires servicing,
the sleeve can be rolled off
to provide access to the
Specifications and Approvals
Raychem
Temperature Ratings
Continuous operating temperature range
Short term temperature exposure
Minimum installation
Sleeve Dimensions
Inches (millimeters)
component under the
sleeve. After the service is
completed, the sleeve can
be rolled on the part again
to provide the protection.
This operation may be
done many times throughout the life of the sleeve
providing time and material
cost savings.
Operating Temperature Range
-40°C to 70°C
[-40°F to 158°F]
RW 3031
Base
Part No.
Available
Kits
LNCL-11-125
LNCL-11-205
LNCL-12-140
LNCL-12-240
LNCL-13-155
LNCL-13-305
LNCL-14-185
LNCL-14-355
LNCL-15-185
LNCL-15-260
LNCL-15-450
GK
GK
GK, CK-N
GK, CK-N
GK, TK-8
GK
GK, TK-7
GK
GK, TK-1, TK-5, TK-6
GK, SS
GK, SS
-40°C to 70°C [-40°F to 158°F]
-63°C to 90°C [-81°F to 194°F]
-25°C [-13°F]
Dimensions (Reference)
Diameter
Lengths
0.51 [13.0]
4.92 [125]
0.51 [13.0]
8.07 [205]
0.56 [14.2]
5.51 [140]
0.56 [14.2]
9.45 [240]
0.75 [19.0]
6.10 [155]
0.75 [19.0]
12.00 [305]
1.02 [25.9]
7.28 [185]
1.02 [25.9]
14.00 [355]
1.45 [36.8]
7.28 [185]
1.45 [36.8]
10.2 [260]
1.45 [36.8]
17.72 [450]
Recommended
Use Range
Connection
Length
0.22 - 0.68 [6 - 17]
0.22 - 0.68 [6 - 17]
0.48 - 0.90 [12 - 23]
0.48 - 0.90 [12 - 23]
0.69 - 1.20 [18 - 30]
0.69 - 1.20 [18 - 30]
0.96 -1.50 [25 - 38]
0.96 -1.50 [25 - 38]
1.40 - 2.00 [36 - 46]
1.40 - 2.00 [36 - 46]
1.40 - 2.00 [36 - 46]
3.00 [75]
6.00 [150]
4.00 [100]
7.00 [175]
4.00 [100]
9.00 [225]
5.00 [125]
10.0 [250]
5.00 [125]
7.50 [190]
12.0 [300]
Refer to Raychem specification control drawing LNCL-XX-125 thru LNCL-XX-450 for more details.
*Tyco Electronics Gel and Sealant product information available at www.tycoelectronics.com
4-99
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
RayOLOn Kits (Continued)
Typical RayOLOn Roll-On
Sealing Sleeve Properties
Physical/
Chemical
Electrical
Property
Tensile strength
Ultimate elongation
Density
Water absorption
24 hours at 23°C [73°F]
Flammability
Dielectric strength
Volume resistivity
Performance
8.3 MPa (1200 psi) minimum
100 % minimum
1.1 g/cm3 maximum
Test method
ASTM D 2671
ASTM D 412
ASTM D 792
0.5 % maximum
ASTM D 570
40 mm/min maximum
90 kV/cm (225 V/mil) minimum
1x1012 Ω-cm
ASTM D 635
ASTM D 149
ASTM D 257
Refer to Raychem specification RW3031 for more requirements and performance information.
Notes:
1. The sleeve is not intended to be heated during the installation process.
2. DO NOTCUTLNCLroll-on sealing sleeve.
3. In case of a conflict between this data sheet and RW3031, RW3031 takes precedence.
4. Not recommended for extended exposure to hydrocarbon based fuel or fluids.
Part Numbering System
Kits
GK—General kit:
CK—Connector sealing kit:
TK—Panel boot sealing kit:
SS—Ship-or-shore kit:
Roll-on sleeve, gel strip, cable tie, core tube, installation instruction
Roll-on sleeve, cable tie, connector flange cover, gel strip, installation instruction
Roll-on sleeve, ferrule, gel strip, cable tie, installation Instruction
Roll-on sleeve, connection shield, installation instruction
Note: Not all sizes and lengths are available for all kit combinations. Please refer to the table on the previous page.
4-100
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
shrinkHOoP
Cable Clamp Heat-Shrink
Grommet
Product Facts
Less assembly time
■ Superior strain-relief
■ Fewer errors — less rework
■ Rework made easier
■ No build-up taping or
feeding wire through
grommet
■ Typical installation in just
10-20 seconds
■ Re-expandable I.D. allows
wire addition to a cable
bundle
■
4
Applications
shrinkHOoP grommet
(URHR) is an ultra high ratio
heat-shrinkable-strain-relief
grommet that can be
placed over the cable
assembly after the connector pinning operation is
completed. The ultra-high
expansion ratio material
conveniently fills the space
between the clamp type
connector accessory and
the cable. (When clamped
into position, shrinkHOoP
grommet provides strain
relief that is more consistent
and convenient than many
conventional practices —
for example, taping, grommet, or tape/grommet combination). The high ratio
conformity of shrinkHOoP
grommets will match most
typical cable configurations
from single conductor to the
high density multiple conductor arrangements.
Operating Temperature Range
-55°C to 135°C
[-67°F to 275°F]
With shrinkHOoP grommet,
repairs and rework are a
snap – simply heat the
grommet until soft, slide a
NON-METALLIC probe
through the center of the
wire bundle (enlarging the
grommet I.D.). Once
cooled, the grommet will
remain open allowing wires
to be added, removed or
reworked. The system can
then be checked, the grommet reheated (shrinking it
down again), positioned,
and clamped in place.
4-101
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
shrinkHOoP (Continued)
Specifications/Approvals
Product Dimensions
Inches (millimeters)
RW
Part
No.
URHR-1
URHR-2
URHR-3
URHR-4
URHR-5
I.D.
Expanded
(X1) min.
1
[25]
1.23
[31]
1.44
[37]
1.85
[47]
2
[51]
Typical shrinkHOoP Grommet
Performance
Physical
I.D.
Recovered
(X) max.
.08
[2.1]
.10
[2.6]
.14
[3.6]
0.18
[4.7]
0.20
[5.1]
O.D.
(Y) Ref.
Length
(L) Ref.
Wt. (gm)
Ref.
0.25
[6]
0.375
[10]
0.5
[13]
0.562
[14]
0.812
[21]
0.5
[13]
0.5
[13]
0.5
[13]
0.75
[19]
0.75
[19]
0.75
a) Recovered length will allow for
1.91 [0.075] either side of the
collar, minimum in most cases.
3.5
5
Test Method
ASTM D-412
ASTM D-412
ASTM D-792
ASTM D-570 A
ASTM D-635
ASTM D-2671 A
Pass
ASTM D-2671 C
Heat resistance
200% ultimate elongation,
minimum
1200 psi (8.3 Mpa) tensile
strength, minimum
No cracking,
dripping or flowing
275% minimum expansion
to 4 inch (10 cm) of a fully
recovered test specimen,
and 93% recovery of expanded
specimen after oven
conditioning for 1 minute
at 150+/-2°C[302 +/- 4°F]
200 v/mil (7880 v/mm)
minimum
10 14 ohm-cm minimum
200% ultimate Elongation,
minimum 1200 psi (8.3 Mpa)
tensile strength, minimum
—
Dielectric strength
Volume resistivity
Chemical Fluid Resistance
1.5
Performance
1500 psi (10.3 Mpa)
250% minimum
1.4 maximum
0.5 % maximum
Pass
Pass
Heat shock
4 hrs at 225+/-2°C [437+/-5°F]
Electrical
1
Property
Tensile strength
Ultimate elongation
Specific gravity
Water absorption
Flammability
Corrosion resistance
Low temperature flex
4 hours at - 55+/-1°C [67+/-2°F]
168 hrs at 175+/-1°C [347+/-2°F]
Elastic Memory
Notes
—
ASTM D-2671
ASTM D 2671
—
ASTM D-876
ASTM D-257
ASTM F-146
4-102
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Accessories
shrinkHOoP (Continued)
Selection chart
8
(9)
10, 12
(11, 13)
Connector Size
14, 16
(15, 17)
18, 20
(19, 21)
22, 24, 28*
MIL-C-5015
MS3451, 52, 56, 59
MS3450
1
2
2
3
3
4
4
5
5
*
MIL-C-26500**
MS24266
MS24264, 265
1
2
2
3
3
4
4
5
5
*
MIL-C-26482
MS3120, 21, 22, 26
MS3470, 71, 74, 75, 76
MS3124, MS3472
1
1
2
2
2
3
3
3
4
4
4
5
5
5
*
MIL-C-83723 Series I
M83723/01 & 02, 05 & 06
07 & 08, 13 & 14, 23 & 24
M83723/03 & 04
1
1
2
2
2
3
3
3
4
4
4
5
5
5
*
MIL-C-83723 Series II
M83723/17 & 18, 23 & 24
M83723/12 & 20, 21 & 22
1
2
2
3
3
4
4
5
5
*
MIL-C-83723 Series III
M83723/71 & 72 thru 97 & 98
M83723/66, 67, 68 & 69
1
2
2
3
3
4
4
5
5
*
MIL-C-38999 Series I
MS27469
MS27466, 68, 96, 27505, 27656
1
2
2
3
3
4
4
5
5
*
MIL-C-38999 Series II
MS27472, 97, 98, 27508, 27513
MS27473, 84, 27474
1
2
2
3
3
4
4
5
5
*
MIL-C-38999 Series III
38999/26
38999/20, 24
1
3
2
4
3
5
4
5
5
*
Boeing
BACC45, F, M, N, P, R, S, T
BACC 63X
—
—
2
3
3
4
4
5
5
*
Boeing
DC39, 31, 34, 35, 50-57
DC32, 33, 36, 37, 60, 61, 62, 63
1
2
2
3
3
4
4
5
5
*
Connector
Series
4
* Consult Tyco Electronics for availability of larger sizes.
** Note: cable support clamp I.D. may effect the size of shrinkHOoPgrommet selected.
4-103
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
XL Products
Ordering Information
Tyco Electronics
Corporation has acquired
XL Technologies. Use the
information in the following
table to convert the XL
part number into the new
Tyco Electronics Raychem
product description.
Description
XL Part No.
080EK025
080EK025-woA
137EK050
137EK050-woA
1-8117-2A
1-8117-3A
1-8117-4A
200EK075
200EK075-woA
20432242
2-8115-2A
2-8115-2AOE
2-8115-2B
2-8115-3A
2-8115-3B
2-8115-4A
2-8115-4B
2-8117-2A
2-8117-2AOE
2-8117-3A
2-8117-4A
2-8118-3A
2S-8115-2A
2S-8115-3A
2S-8115-4A
380EK150
380EK150woA
3-8115-2B
3-8115-3B
3-8115-4B
3-8118-4B
3A-8117-2B
3A-8117-3B
3A-8117-4B
4-8115-2C
4-8115-3C
4-8115-4C
4-8117-2B
4-8117-3B
4-8117-4B
4A-8117-2C
4A-8117-3C
4A-8117-4C
52451-2X12A
5-8115-3D
8114-1
1/2/14
8114-1-49R
8114-2
8114-2-50R
8114-2S
8114-2V
8114-2VL
8114-3
8114-3-51R
8114-3L
8114-3S
8114-4
8114-4-54R
8114-4N
8114-4S
Convert to
Description
SSC-2/239
SSC-2/U
SSC-3/239
SSC-3/U
CES-2A-D1
CES-2A-T1
CES-2A-F1
SSC-4/239
SSC-4/U
CES-4/HR-3
CES-2-D1A
CES-2-D1A
CES-2-D1
CES-2-T1
CES-2-T1B
CES-2-F1A
CES-2-F1
CES-2A-D1
CES-2A-D1
CES-2A-T2
CES-2A-F2
CES-2-T1
CES-2-D1A
CES-2-T1
CES-2-F1A
SSC-6/239
SSC-6/U
CES-3-D1
CES-3-T1
CES-3-F1
CES-3-F1
CES-3A-D1
CES-2A-T3
CES-3A-F1
CES-4-D3
CES-4-T1
CES-4-F1
CES-3A-D2
CES-3A-T2
CES-3A-F2
CES-4A-D3
CES-4A-T3
CES-4A-F3
91385-2/12
CES-5-T4
CES-1
CES-1-2
CES-1R
CES-2
CES-2R
CES-2
CES-2V
CES-2V
CES-3
CES-3R
CES-3L
CES-3S
CES-4
CES-4R
CES-4
CES-4S
Description
XL Part No.
8114-4S/C
8114-5
8116-1
8116-1-49R
8116-1A
8116-2
8116-2-50R
8116-3
8116-3-51R
8116-3A
8116-4
8116-4-52R
8116-4A
8116-5
8118-2
91342-1
91342-12
91342-2
91342-23
91342-3X2.5
91342-3
91342-34
91342-4
91343-1
91343-2
91343-2A
91343-3
91343-4
91343-5
91343-5678
91343-6
91343-910
91344-1
91344-1213
91344-1415
91344-1617
91344-2
91344-3
91344-4
91344-5
91344-6
91346-3
91346-30
91346-31
91346-32
91347-30
91347-31
91347-32
91348-1
91348-2
91348-3
91348-30
91348-31
91348-32
91349-30
91349-31
91349-32
91350-30
91350-31
91350-32
91351-30
Convert to
Description
CES-4S
CES-5
CES-2-A50
CES-2R-A50
CES-2-A50
CES-2-A75
CES-2R-A75
CES2-A100
CES-3R-A100
CES-3-A100
CES-3-A150
CES-3R-A150
CES-4A-A150
CES-5-A250
CES-2
D3-9 FR
D3-30 FR
D14-30 FR
D14-100 FR
D50-200 FR
D50-100 FR
D50-400 FR
D200-400 FR
T3-9 FR
T14-23 FR
T14-50 FR
T42-100 FR
T150-300 FR
T-400 FR
T3-100 FR
T500-600 FR
T150-400 FR
F3-9 FR
F3-23 FR
F42-100 FR
F75-200 FR
F-23 FR
F42-60 FR
F75-100 FR
F133-200 FR
F150-400 FR
6S100-200 FR
202A111-3-0
202A111-3/42-0
202A111-3/86-0
202A121-3-0
202A121-3/42-0
202A121-3/86-0
8S23-75 FR
8S14-50 FR
8S42-100 FR
202A132-3-0
202A132-3/42-0
202A132-3/86-0
202A142-3-0
202A142-3/42-0
202A142-3/86-0
202A153-3-0
202A153-3/42-0
202A153-3/86-0
202A163-3-0
4-104
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
XL Products
Ordering Information (Continued)
Description
XL Part No.
91351-31
91351-32
91352-30
91352-31
91352-32
91353-30
91353-31
91353-32
91354-30
91354-31
91354-32
913L87-30
913L87-31
913L87-32
91387-30
91387-31
913L47-30
913L47-31
913L47-32
913L48-30
913L48-31
913L48-32
913L49-30
913L49-31
913L49-32
913L50-30
913L50-31
913L50-32
913L51-30
913L51-31
913L51-32
913L52-30
913L52-31
913L52-32
913L53-30
913L53-31
913L53-32
913L54-30
913L54-31
913L54-32
913L66-30
913L66-31
913L66-32
913L67-30
913L67-31
913L67-32
913L68-30
913L68-31
913L68-32
913L69-30
913L69-31
913L69-32
913L70-30
913L70-31
Convert to
Description
202A163-3/42-0
202A163-3/86-0
202A174-3-0
202A174-3/42-0
202A174-3/86-0
202A185-3-0
202A185-3/42-0
202A185-3/86-0
202A196-3-0
202A196-3/42-0
202A196-3/86-0
202D921-3/-0
202D921-3/42-0
202D921-3/86-0
202A921-3/-0
202A921-3/42-0
202D121-3/-0
202D121-3/42-0
202D121-3/86-0
202D132-3/-0
202D132-3/42-0
202132-3/-86-0
202D142-3/-0
202D142-3/42-0
202D142-3/86-0
202D153-3-0
202D153-3/42-0
202D153-3/86-0
202D163-3-0
202D163-3/42-0
202D163-3/86-0
202D174-3-0
202D174-3/42-0
202D174-3/86-0
202D185-3-0
202D185-3/42-0
202D185-3/86-0
202D196-3-0
202D196-3/42-0
202D196-3/86-0
202D211-3-0
202D211-3/42-0
202D211-3/86-0
202D221-3-0
202D221-3/42-0
202D221-3/86-0
202D232-3-0
202D232-3/42-0
202D232-3/86-0
202D242-3-0
202D242-3/42-0
202D242-3/86-0
202D253-3-0
202D253-3/42-0
Description
XL Part No.
913L70-32
913L87-30
913L87-31
913L87-32
913R48-30
913R48-31
913R48-32
913R49-30
913R49-31
913R49-32
913R50-30
913R50-31
913R50-32
913R51-30
913R51-31
913R51-32
913R52-30
913R52-31
913R52-32
913RL48-30
913RL48-31
913RL48-32
913RL49-30
913RL49-31
913RL49-32
913RL50-30
913RL50-31
913RL50-32
913RL51-30
913RL51-31
913RL51-32
913RL52-30
913RL52-31
913RL52-32
913Y95-30
913Y95-31
913Y95-32
913Y96-30
913Y96-31
913Y96-32
HHW-1.3/6A
HHW-13/6A
HHW-15/12
HHW-15/6
HHW-15/9
HHW-20/9
HRSR-1
HRSR-2
HRSR-3
HRSR-4
HRSR-5
XHTA
XHTU
XMTA
Convert to
Description
202D253-3/86-0
202D921-3-0
202D921-3/42-0
202D921-3/86-0
222A132-3-0
222A132-3/42-0
222A132-3/86-0
222A142-3-0
222A142-3/42-0
222A142-3/86-0
222A152-3-0
222A152-3/42-0
222A152-3/86-0
222A163-3-0
222A163-3/42-0
222A163-3/86-0
222A174-3-0
222A174-3/42-0
222A174-3/86-0
222D132-3-0
222D132-3/42-0
222D132-3/86-0
222D142-3-0
222D142-3/42-0
222D142-3/86-0
222D152-3-0
222D152-3/42-0
222D152-3/86-0
222D163-3-0
222D163-3/42-0
222D163-3/86-0
222D174-3-0
222D174-3/42-0
222D174-3/86-0
381A301-71/-0
381A301-71/42-0
381A301-71/86-0
381A302-71/-0
381A302-71/42-0
381A302-71/86-0
SST-6-13FR/97-0
SST-6-13FR/97-0
SST-12-15FR/97-0
SST-6-15FR/97-0
SST-9-15FR/97-0
SST-9-20FR/97-0
URHR-1
URHR-2
URHR-3
URHR-4
URHR-5
RHW
RHW
RPRD
4
4-105
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Molded Parts
Engineering Notes
4-106
Catalog 1654025
Revised 12-03
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Japan: 81-44-900-5102
Singapore: 65-4866-151
UK: 44-1793-528171
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising