Manual 12695656
VSX-6153-V2
DM&P Vortex86SX 300MHz
PC/104 CPU Module
with 4S/2USB/VGA/LCD/LVDS/LAN/GPIO/CF
128MB DDR2 Onboard
User’s Manual
(Revision 1.0A)
http://www.microcomputersystems.com
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
©Copyright 2007 ICOP Technology Inc.
Manual No. IUM6153-V2000-01 Ver.1.0A
August, 2010
Trademarks Acknowledgment
Vortex86SX™ is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
Table
of
Contents
T a b l e o f C o n t e n t s .............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................ 1
1.2 Product Description ................................................ 2
1.3 Specifications ......................................................... 3
1.4 Board Dimension.................................................... 5
Chapter 2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Installation……………………………………………..6
Board Outline ......................................................... 6
Connectors & Jumpers Location .................... ........7
Connectors & Jumpers Summary........................... 9
Pin Assignments & Jumper Settings......................11
System Mapping................................................... 20
Watchdog Timer ................................................... 23
GPIO .................................................................... 24
SPI flash............................................................... 25
Chapter
Driver Installation……………………………………26
Appendix
3
………………………………………………………………..27
A. TFT Flat Panel Data Output ...................................... 27
B. TFT Flat Panel Support List....................................... 28
C. LVDS Flat Panel Support List.................................... 30
D. Flat Panel Wiring and Lighting .................................. 31
E. TCP/IP library for DOS real mode ............................. 32
F. BIOS Default Setting.................................................. 33
Warranty............................................................................................ 34
Chapter
1
Introduction
1.1
Packing List
Product Name
Package
Embedded Vortex86SX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
PRINT cable x1
IDE cable x 1
VSX-6153-V2
USB cable x 1 (USB port x 2 )
VGA cable x 1
LAN cable x 1
GPIO cable x 1
PS/2 Mouse cable x 1
PS/2 Keyboard cable x 1
Screw Kit x 1
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
1
1.2
Product Description
The VSX-6153-V2 family of low-power x86 embedded controller is designed to meet PC/104
specification, and integrated with the following features.
„
300 MHz Vortex86SX SoC
„
VGA, TFT/ LVDS LCD support up to
„
Audio (Optional)
1280x1024 resolution
„
Onboard 2MB SPI Flash
„
128/256MB DDR2 system memory
„
Meet PC/104 stacking spec.
„
Enhanced IDE
„
2 watchdog timer
„
10/100Mbps Ethernet
„
JTAG interface
„
2 USB 2.0 (host)
„
AMI BIOS
„
Up to 4 serial ports
„
Single voltage +5V DC
„
Parallel port
„
Support extended operating
„
16-bit GPIOs
temperature range of -20°C to +70°C
The VSX-6153-V2 PC/104 family of embedded controller is designed with backward compatibility
in mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based PC/104 controller. The VSX-6153-V2 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VSX-6153-V2 is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as PC/104.
Vortex86SX-6153-V2
Vortex86SX™
PC/104 CPU Module
2
1.3
Specifications
Features
CPU
Cache
BIOS
Bus Interface
System Memory
Watchdog Timer
VGA
LAN
AUDIO
I /O Interface
Connectors
Vortex86SX-6153-V2
VSX-6153-V2
DM&P SoC CPU Vortex86SX- 300MHz
Real Time Clock with Lithium Battery Backup
L1:16K I-Cache, 16K D-Cache
AMI BIOS
PC/104 Standard Compliant
128 / 256MB DDR2 Onboard
Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory
Support resolution up to 1280 x 1024,16MB colors
Integrated 10/100M Ethernet
CM119 USB Audio controller (Optional)
Enhanced IDE port x1
RS-232 port x3
RS-232/422/485 port x1 (RS485: Auto Direction)
Parallel port x1
USB port x2 (USB 2.0 version)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
2.00 mm ∅ 44-pin box header for IDE x1
2.00 mm ∅ 44-pin box header for LCD x 1
2.00 mm ∅ 10-pin box header for VGA x1
2.00 mm ∅ 10-pin box header for USB x1
2.00 mm ∅ 26-pin box header for Print x1
2.00 mm ∅ 20-pin box header for 16-bit GPIO x1
2.00 mm ∅ 10-pin box header for RS-232 x4
2.00 mm ∅ 16-pin header for LVDS x 1
2.00 mm ∅ 8-pin header for Ethernet x 1
2.54 mm ∅ 5-pin box header for Keyboard x1
2.54 mm ∅ 5-pin header for Mouse x1
2.54 mm ∅ 4-pin header for DC-in x1
2.54 mm ∅ 3-pin header for RS-485 x1
2.54 mm ∅ 2-pin header for Reset x1
2.54 mm ∅ 7-pin header for Redundancy x1(Opt)
2.54 mm ∅ 2-pin header for SYS-Fail-SW- x1(Opt)
1.25 mm ∅ 6-pin Wafer for JTAG x1
1.25 mm ∅ 4-pin Wafer for Line-out/MIC-in x2(Optional)
Type I/II Compact Flash Slot x1
Vortex86SX™ PC/104 CPU Module
3
Flash Disk Support
Onboard 2MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Compact Flash Type I/II
PWM
Power Requirement
Dimension
Weight
Operating
Temperature
Vortex86SX-6153-V2
16~24 channels
Single Voltage +5V @ 580mA
90 X 96mm (3.54 x 3.77 inches)
90g
-20 o C ~ +70 o C
-40°C ~ +85°C (Optional)
Vortex86SX™ PC/104 CPU Module
4
1.4
Board Dimension
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
5
Chapter2
Installation
2.1
Board Outline
(Note1: COM2 RS232/422/485 is selected by BIOS setting)
(Note2: Audio is optional)
(Note3: Redundancy Signal and System-Fail-SW are optional)
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
6
2.2
Connectors & Jumpers Location
Connectors
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
7
Jumpers & LEDs
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
8
2.3
Connectors & Jumpers Summary
Summary Table
Nbr
J1
J2
J4
J5
J6
J7
J8
J9
J10
J11
J12
J13
J15
J16
J17
J18
J19
J20
J21
J22
J24
J25
J33
J34
J35
J36
CF1
PWR-
Description
Type of Connections Pin nbrs.
IDE
Box Header, 2.0∅ ,22x2
44-pin
USB
Box Header,2.0∅ , 5x2
10-pin
LAN
Pin Header, 2.0∅ , 4x2
8-pin
JTAG
Wafer, 1.25∅ , 6x1
6-pin
Reset
Pin Header, 2,54∅,1x2
2-pin
Redundancy (Optional)
Pin Header, 2.54∅, 7x1
7-pin
System –Fail-Switch (Optional) Pin Header, 2.54∅ , 2x1
2-pin
PS/2 Keyboard
Box Header, 2,54∅,1x5
5-pin
PS/2 Mouse
Pin Header, 2,54∅,1x5
5-pin
COM1(TTL/GPIO-P4)
Box Header, 2.0∅ 5x2
10-pin
Box Header, 2.0∅ 5x2
10-pin
COM2(RS232/422/485)
GPIO ( Port 0 / 1 )
Box Header, 2.0∅ ,10x2
20-pin
RS-485 (Auto direction)
Molex Header,2.54∅, 3x1
3-pin
Power Connector
Terminal Block 5.0∅,2x1
2-pin
COM3
Box Header, 2.0∅ 5x2
10-pin
PRINT
Box Header, 2.0∅ , 13x2
26-pin
COM4
Box Header, 2.0∅ 5x2
10-pin
PC104 Connector – 64 pin
Box Header, 2.54∅ 32x2
64-pin
PC104 Connector – 40 pin
Box Header, 2.54∅ 20x2
40-pin
4P Power Source (Interconnect Pin Header, 2.54∅ , 4x1
4-pin
to PC/104 – J20)
VGA
Box Header, 2.0∅ ,5x2
10-pin
LCD Connector
Box Header,2.0∅ ,22x2
44-pin
LINE-OUT (Optional)
Wafer, 1.25∅ , 4x1
4-pin
MIC-IN (Optional)
Wafer, 1.25∅ , 4x1
4-pin
Master/Slave for IDE & CF
Slide Switch
3-pin
LVDS
Pin Header, 2.0∅ 8x2
16-pin
Compact Flash
Type I/II CF Connector
50-pin
Power Active LED (Red)
LED-SMD
LED
IDE- IDE Active LED (Green )
LED
Vortex86SX-6153-V2
LED-SMD
Vortex86SX™ PC/104 CPU Module
9
MTBF- MTBF-Out (Orange)
LED-SMD
LED
LED 3 LAN Link/Active LED (Green)
LED-SMD
LED 4 LAN Duplex LED ( Yellow )
SP1 BUZZER
Vortex86SX-6153-V2
LED-SMD
Vortex86SX™ PC/104 CPU Module
10
2.4
Pin Assignments & Jumper Settings
J1: IDE (44 Pins)
Pin #
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
Signal Name
IDERST
IDED7
IDED6
IDED5
IDED4
IDED3
IDED2
IDED1
IDED0
GND
IDEREQ
IDEIOW
IDEIOR
ICHRDY
IDEACK
IDEINT
IDESA1
IDESA0
IDECS-0
IDELED
VCC
GND
Pin # Signal Name
2
GND
4
IDED8
6
IDED9
8
IDED10
10
IDED11
12
IDED12
14
IDED13
16
IDED14
18
IDED15
20
NC
22
GND
24
GND
26
GND
28
GND
30
GND
32
NC
34
IDECBLID
36
IDESA2
38
IDECS1
40
GND
42
VCC
44
NC
J2: USB
Pin #
1
3
5
7
9
Signal Name Pin # Signal Name
VCC
2
VCC
LUSBD34
LUSBD2LUSBD3+
6
LUSBD2+
GND
8
GND
GGND
10
GGND
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
11
J4: LAN
Pin #
1
3
5
7
Signal Name Pin # Signal Name
ATX+
2
ATXARX+
4
LED0
LED0+
6
ARXLED1+
8
LED1
J5: JTAG
Pin #
1
3
5
Signal Name Pin # Signal Name
VCC
2
GND
TCK
4
TDO
TDI
6
TMS
J6: RESET
Pin #
1
Signal Name Pin # Signal Name
RST_SW
2
GND
J7: Redundancy (Optional)
Pin #
1
3
5
7
Signal Name Pin # Signal Name
GND
2 SYS-FAIL-OUT
SYS-FAIL-IN
4
GPCS0
SYS-GPCS-IN
6
TXD9\
RXD9\
J8: System-Fail-Switch (Optional)
Pin #
1
2
Signal Name
SYS-SW-IN
GND
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
12
J9: PS/2 Keyboard
Pin #
1
3
5
Signal Name Pin # Signal Name
KBCLK
2
KBDAT
NC
4
GND
VCC
J10: PS/2 Mouse
Pin #
1
3
5
Signal Name Pin # Signal Name
MSCLK
2
MSDATA
NC
4
GND
VCC
J11: COM 1 (Optional: TTL/ GPIO-P4)
Pin #
1
3
5
7
9
Signal
Name
DCD1
TXD1
GND
RTS1
RI1
Pin #
2
4
6
8
10
Signal
Name
RXD1
DTR1
DSR1
CTS1
NC
J12: COM2 RS232 / 422 / 485 (Optional: TTL)
Pin #
Signal Name
Pin #
Signal Name
1
DCD2/ 422TX- / RS485-
2
RXD2 / 422TX+ / RS485+
3
TXD2 / 422RX+
4
DTR2 / 422RX-
5
GND
6
DSR2
7
RTS2
8
CTS2
9
RI2
10
NC
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
13
J13: GPIO (Port 0 / 1)
Pin #
1
3
5
7
9
11
13
15
17
19
Signal Name
GND
GP00
GP01
GP02
GP03
GP04
GP05
GP06
GP07
VCC
Pin # Signal Name
2
VCC
4
GP10
6
GP11
8
GP12
10
GP13
12
GP14
14
GP15
16
GP16
18
GP17
20
GND
J15: RS485 (Auto direction)
Pin #
1
2
3
Signal Name
RS485+
RS485-
GND
J16: Power Connector (Terminal Block 5.0mm)
Pin #
1
2
Signal Name
+5V
GND
J17: COM3 (Optional: TTL)
Pin #
1
3
5
7
9
Signal Name Pin # Signal Name
DCD3
2
RXD3
TXD3
4
DTR3
GND
6
DSR3
RTS3
8
CTS3
RI3
10
NC
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
14
J18: PRINT
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
Signal Name
STBPD0
PD1
PD2
PD3
PD4
PD5
PD6
PD7
ACKBUSY
PE
SLCT
Pin # Signal Name
14
AFD15
ERR16
INIT17
SLIN18
GND
19
GND
20
GND
21
GND
22
GND
23
GND
24
GND
25
GND
26
NC
J19: COM4 (Optional: TTL)
Pin #
1
3
5
7
9
Signal Name Pin # Signal Name
DCD4
2
RXD4
TXD4
4
DTR4
GND
6
DSR4
RTS4
8
CTS4
RI4
10
NC
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
15
J20: PC104 Connector – 64pin
Pin #
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
Signal Name Pin # Signal Name
IOCHCHK * 2
GND
SD7
4
RESETDRV
SD6
6
VCC
SD5
8
IRQ9
SD4
10
-5V
SD3
12
DRQ2
SD2
14
-12V
SD1
16
OWS
SD0
18
+12V
IOCHRDY
20
GND
AEN
22
SMEMW *
SA19
24
SMEMR *
SA18
26
IOW *
SA17
28
IOR *
SA16
30
DACK3 *
SA15
32
DRQ3
SA14
34
DACK1 *
SA13
36
DRQ1
SA12
38 REFRESH *
SA11
40
SYSCLK
SA10
42
IRQ7
SA9
44
IRQ6
SA8
46
IRQ5
SA7
48
IRQ4
SA6
50
IRQ3
SA5
52
DACK2 *
SA4
54
TC
SA3
56
BALE
SA2
58
VCC
SA1
60
OSC
SA0
62
GND
GND
64
GND
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
16
J21: PC104 Connector – 40pin
Pin #
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
Signal Name Pin # Signal Name
GND
2
GND
MEMCS16 * 4
SBHE *
IOCS16 *
6
SA23
IRQ10
8
SA22
IRQ11
10
SA21
IRQ12
12
SA20
IRQ15
14
SA19
IRQ14
16
SA18
DACK0 *
18
SA17
DRQ0
20
MEMR *
DACK5 *
22
MEMW *
DRQ5
24
SD8
DACK6 *
26
SD9
DRQ6
28
SD10
DACK7 *
30
SD11
DRQ7
32
SD12
VCC
34
SD13
MASTER * 36
SD14
GND
38
SD15
GND
40
NC
J22: 4P Power Source (Interconnect to PC/104 – J20)
Pin #
1
2
3
4
Signal Name
-5V
-12V
+12V
GND
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
17
J24: VGA
Pin #
1
3
5
7
9
Signal
Name
R OUT
G OUT
B OUT
HSYNC
VSYNCD
Pin #
2
4
6
8
10
Signal
Name
GND
GND
GND
GND
GND
J25: LCD (DVO) Connector
Pin #
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
Signal Name
+3.3V
LG2
LG4
NC
LR0
LR2
LR4
GND
NC
NC
NC
LB0
LB2
LB4
NC
LG0
GND
NC
NC
NC
NC
LBACKL
Pin # Signal Name
2
+3.3V
4
LG3
6
LG5
8
NC
10
LR1
12
LR3
14
LR5
16
NC
18
NC
20
GND
22
NC
24
LB1
26
LB3
28
LB5
30
NC
32
LG1
34
GND
36
LCLK
38
LDE
40
LHSYNC
42
LVSYNC
44
LVDDEN
(Please refer to Appendix A, for TFT Flat Panel Data Output)
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
18
J33: LINE OUT (Optional)
Pin #
1
2
3
4
Signal Name
LOUTR
GND
GND
LOUTL
J34: MIC-IN (Optional)
Pin #
1
2
3
4
Signal Name
MICVREF
GND
GND
MIC-IN
J36: LVDS
Pin #
1
3
5
7
9
11
13
15
Signal Name Pin # Signal Name
VCC3 (3.3V)
GND
RxIN0+
RxIN1GND
RxIN2+
CKINGND
Vortex86SX-6153-V2
2
4
6
8
10
12
14
16
VCC3 (3.3V)
GND
RxIN0GND
RxIN1+
RxIN2GND
CKIN+
Vortex86SX™ PC/104 CPU Module
19
2.5
System Mapping
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
20
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
21
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
22
2.6
Watchdog Timer
There are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D
watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0
and new one is called WDT1.
We also provide DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
23
2.7
GPIO (General Purpose Input / Output)
40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins
are independent and can be configured as inputs or outputs, with or without pull-up/pull-down
resistors.
We also offer DOS, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
24
2.8
SPI flash (Serial Peripheral Interface)
As SPI Flash (Serial Peripheral Interface) offers many benefits including: reduced controller pin
count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower
system cost
Many of users may consider using a formatted SPI flash to boot for the system or emulate SPI
flash as Floppy (A: Driver or B: Driver). Then you must know how to set for this condition in
CMOS Setup and boot up under DOS 6.22, X-DOS, DR-DOS and Free DOS.
For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
25
Chapter
3
Driver Installation
VGA
The Vortex86SX processor also use external Display chip ““Volari™ Z9s” which is an ultra low
powered graphics chipset with total power consumption at around 1-1.5 W. It is capable in
providing VGA display output upto 1600x1200. With DVO interface, developers could easily
connect flat Panel to support TFT and LVDS output.
LAN
The Vortex86SX processor also integrated 10/100Mbps Ethernet controller that supports both
10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area
Network for full interaction with local servers, wide area networks such as the Internet.
The controller supports: Half / Full-Duplex Ethernet function to double channel bandwidth, auto
media detection.
AUDIO
CM119 is a highly integrated single chip USB audio controller specifically for VoIP (Voice over
internet protocol) application. All essential analog modules are embedded in CM119, including
dual DAC and earphone driver, ADC, microphone booster, PLL, regulator, and USB transceiver.
8 GPIO pins can constitute a 24 key matrix directly support keypad control function without MCU.
Many features are programmable with jumper pins or external EEPROM. Vender can customize
unique USB VID/PID to EEPROM for VoIP software authentication. Moreover, individual unique
phone number for each device is possible via serial number stored in external EEPROM.
Operating system support
The Vortex86SX-6153-V2 PC/104 CPU board supports Embedded software: Free DOS, DOS
6.22, PCDOS 7.1, DR-DOS, x-DOS, OS/2, Windows CE 5.0 / 6.0
Please get the drivers from the Driver CD which attached with the standard packing of
Vortex86SX-6153-V2 board or please get it from DMP official website:
http://www.dmp.com.tw/tech/vortex86sx/
Vortex86SX-6153-V2 also supports most of the popular Linux distributions, for more detail
information, please visit DMP official website: http://www.dmp.com.tw/tech/vortex86sx/
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
26
Appendix
A.
TFT Flat Panel Data Output
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
27
B.
TFT Flat Panel Support List
Size
Brand
Resolution
Model No.
5.7”
Data image
320x240
FG050701DSSWBG01
5.7”
Optrex
320x240
55264GD057J-FW-ABN
5.7”
TOSHIBA
320x240
LTA057A343F
5.7”
Sharp
320x240 (QVGA / VGA)
LQ057Q3DC02
5.7”
Kyocera
320x240 (QVGA / VGA)
TCG057QV1AC-G10
5.7”
PVI
320x240 (QVGA / VGA)
PD057VU4 /U5
5.7”
Data image
640x480
FG050710DSSWJG01/DG01
5.7”
Ampire
640x480
AM-640480GTMQW-T00H
5.7”
URT
640x480
UMSH-8004MD-T
5.7”
Sharp
640x480
LQ057V3DG01
5.7”
CPT
640x480
CLAA057VA01
6.4”
PVI
640x480
V16C6448AC
6.4”
LG-PHILIPS
640x480
LB064V02
6.4”
PVI
640x480
PD064VT2 /VT4 /VT5
6.4”
Sharp
640x480
LQ064V3DG01
7”
AUO
800x480
C070VW02V0
7”
Data image
800x480
FG0700A0DSSWBG01
7”
LG-PHILIPS
800x480 (TFT 24 bits)
LB070WV1
7”
HITACHI
800x480
TX18D57VM2BAA
7”
Samsung
800x480
LMS700KF05
7”
PVI
800x480
PM070WL4
7”
URT
800x480
UMSH-8173MD-1T
7”
CHI HSIN
800x480
LW700AT9309
8”
Sharp
640x480
LQ080V3DG01
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
28
Size
Brand
Resolution
Model No.
8”
AUO
800x600 (TFT 24bits)
A080SN01 V0
8.4”
Sharp
800x600
LQ084S3DG01
10.4”
PVI
640x480
PD104VT1/VT2
10.4”
NEC
640x480
NL6448AC33-18
10.4”
NEC
640x480
NL6448AC33-29
10.4”
NEC
640x480
NL6448BC33-59
10.4”
Sharp
640x480
LQ104V1DG51/DG61
10.4”
Sharp
640x480
LQ10d368
11”
Sharp
800x480
LQ110Y3DG01
12.1”
NEC
800x600
NL8060BC31-01
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
29
C.
LVDS Flat Panel Support
Size
Brand
Resolution
Model No.
3.5”
PVI
640x480
PD035VL1
5”
PVI
640x480
PD050VL1
6.5”
AUO
640x480
G065VN01
8.4”
AUO
800x600
G084SN03
8.9”
AUO
1024x600
A089SW01
8.9”
CPT
1024x600
CLAA089NA0ACW
8.9”
HannStar
1024x600
HSD089IFW1
10.4”
MITSUBISHI
800x600
AA104SG01
10.4”
AUO
800x600
G104SN02
10.4”
Sharp
800x600
LQ104S1LG61
12.1”
MITSUBISHI
800x600
AA121SL03
12.1”
AUO
800x600
G121SN01
15”
AUO
1024x768
G150XG01
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
30
D.
„
Flat Panel Wiring and Lighting
Hardware
Before you connect the TFT LCD Flat Panel with Vortex86SX-6153-V2, please make sure
that the input Voltage of LCD is+3.3V or Not
„
BIOS
Please contact or e-mail our regional sales to get the special BIOS for the any TFT LCD
Flat Panels.
„
Wiring LCD Cable
Please refer to Page 18 (J25: LCD connector) and Page 27~31. Or for more LCD lighting
and integration service, please contact our regional sales or mail to info@icop.com.tw ,if
you have any questions.
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
31
E.
TCP/IP library for DOS real mode
DSock is a TCP/IP library for DOS real mode, which is used by RSIP. It provides simple C
functions for programmer to write Internet applications. ICOP also provide Internet examples
using DSock: BOOTP/DHCP, FTP server, SMTP client/server, HTTP server, TELNET server,
Talk client/server, etc.
DSock provides a lot of example source code. Programmer can add Internet functions to their
project easily and save development time. With a utility "MakeROM”, programmer also can make
a ROM image to fit their application, those examples can be seen in the following Application
systems: Mity-Mite Serial Server, Web Camera Tiny Server and RSIP Serial Server.
DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and
ICOP also provide the business version of DSock for those customers who are using other x86
CPUs.
If you would like to use DSock or business version of DSock, Please mail to info@icop.com.tw or
contact your regional sales.
Please download the trial DSock software and Utilities from our website:
http://www.dmp.com.tw/tech/dmp-lib/dsock/
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
32
F.
BIOS Default setting
If the system cannot be booted after BIOS changes are made, Please follow below procedures in
order to restore the CMOS as default setting.
„
Press “End” Key, when the power on
„
Press <Del> to enter the AMI BIOS setup
„
Press “F9” to Load Optimized Defaults
„
Press “F10” to Save configuration changes and exit setup
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
33
Warranty
This product is warranted to be in good working order for a period of one year from the date of
purchase. Should this product fail to be in good working order at any time during this period, we
will, at our option, replace or repair it at no additional charge except as set forth in the following
terms. This warranty does not apply to products damaged by misuse, modifications, accident or
disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, originality to use this
product. Vendor will not be liable for any claim made by any other related party. Return
authorization must be obtained from the vendor before returned merchandise will be accepted.
Authorization can be obtained by calling or faxing the vendor and requesting a Return
Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a
clear problem description.
Vortex86SX-6153-V2
Vortex86SX™ PC/104 CPU Module
34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising