Half-Light Series Catalog Page

Half-Light Series Catalog Page
NEW!
NEW!
LIGHTING CONTROLS
Two Stage and Three Stage Half-Light™ Controllers
Half-Light Series
Description
The Half-Light Series installs in any light fixtures and uses
exisiting switches to start lighting levels at 50% and then
can be sequenced to full light. The Two-Stage Half Light
Controller(HAF2) is designed for a two-ballast, four-lamp
fixture in which each ballast controls two lamps. Within this
configuration, an initial toggle ON of the wall switch activates
one ballast only, producing 50% light; by toggling the switch
OFF and then ON again, both ballasts will be activated,
delivering full light output. The Three-Stage Half Light
Controller (HAF3) is designed for a six-lamp fixture in which
one ballast controls two lamps and the other ballast controls
the remaining four lamps. Within this configuration, an initial
toggle ON of the wall switch activates ballast one only,
delivering 33% light; toggling the switch OFF and then ON
again will activate ballast two only, producing 67% light; and,
by toggling the switch OFF and then ON again a final time,
both ballasts will be activated, delivering full light output.
Features
Wire to Ballast 2
White wire
Incoming 120 VAC
or 208-277 VAC
controlled by
wall switch
Wire to Ballast 1
Wiring
Does not change voltage waveform
Installs in wiring compartment of light fixture
Uses existing wall switch
Bi-level lighting control
Can be used with most motion sensing switches
White/Black
White
White
*Black or Red
Orange
Black
Two Stage
Half-Light™
Model HAF2
Not
Used*
Incoming 120 VAC
or 208-277 VAC
controlled by
wall switch
Wire to Ballast 1
Supply Voltage
120/208-277 VAC
Contactor Ballast
5 A @ 120-277 VAC
Contactor Tungsten
5 A @ 120 VAC
Operating Temperature-30° to 140°F (-34.4° to 60°C)
Operating Humidity
5 to 95% RH (Non-condensing)
Dimensions
3.75"H x 1.66"W x 1.18"D
(9.5 x 4.2 x 3 cm)
Approvals
UL File E68805, C-UL, CE
Weight
0.2 lb (0.09 kg), 0.24 lb (0.11 kg)
Warranty
1 year
White wire
Specifications
Wire to Ballast 2
LIGHITING CONTROLS
12
•
•
•
•
•
White
Black
White/Red
White/Black Three Stage
White Half-Light™
*Black or Red Model HAF3 Not
Used*
Orange
* For 120 VAC systems, Black wire is used, Red wire is not used. For 208-277 VAC
systems, Red wire is used, Black wire is not used.
ORDERING INFORMATION
MODEL HAF2 HAF3 596
DESCRIPTION
Independent lighting controller, two stage, 120/208-277 VAC
Independent lighting controller, three stage, 120/208-277 VAC
001-901-382-6084 International 888-397-5353 USA kele.com
© 2012 Kele, Inc. All rights reserved. The Kele name and logo are registered trademarks of Kele, Inc.
January 2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising