TireMan 7120 Owner’s Manual Installation • Assembly Drawings • Parts

TireMan 7120 Owner’s Manual Installation • Assembly Drawings • Parts
TireMan 7120
Owner’s Manual
Installation • Assembly Drawings • Parts
Notice: A copy of this manual must remain with the equipment at all times.
For a printable download copy, please visit: www.stellarindustries.com
Subject to Change without Notification.
© 2016 Stellar Industries, Inc.
Stellar Industries, Inc.
190 State Street
PO Box 169
Garner, IA 50438
800-321-3741
Fax: 641-923-2811
www.stellarindustries.com
Last Revision: 04/29/16
Model TM7120 Manual Revisions
Date of Revsion
Section Revised
Page ii | Stellar® TM7120 TireMan Owner’s Manual
Description of Revision
Table of Contents
Introduction......................................................................................... iv
Model TM7120 Specifications.............................................................1
TM7120 Dimensional Layout...............................................................2
General Installation..............................................................................3
Installer Notice....................................................................................3
Torque Data Chart.............................................................................4
Hydraulic Installation...........................................................................5
Hydraulic Pressure Settings..................................................................6
Face Seal/O-Ring Size Chart..............................................................6
Hydraulic Kit (FP Version) - PN 78071.................................................. 7
Hydraulic Kit (RP Version) - PN 78019..................................................8
Hydraulic Kit (CRP Version) - PN 78012............................................... 9
TM7120 (FP Version) Breakdown - PN 77857.................................... 10
TM7120 (FP Version) Bill - PN 77857...................................................11
TM7120 (RP Version) Breakdown - PN 74244................................... 12
TM7120 (RP Version) Bill - PN 74244...................................................13
TM7120 (CRP Version) Breakdown - PN 76339................................. 14
TM7120 (CRP Version) Bill - PN 76339................................................15
Decal Placement - PN 54772..........................................................16
Stellar® TM7120 TireMan Owner’s Manual | Page iii
Introduction
A copy of this manual is provided with every tire manipulator and can be found in the hard
plastic manual case that is installed on the chassis. A copy of this manual shall remain with
the tire manipulator at all times.
Throughout the manual, three signal words will be used to bring attention to important
items:
NOTICE
A NOTICE signal word indicates a practice not related to physical injury.
WARNING signal word indicates a hazardous situation which, if not
WARNING A
avoided, could result in death or serious injury.
DANGER
A DANGER signal word indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Information contained within this manual does not cover operation, maintenance, or
troubleshooting. Please refer to the Large OTR Crane Manual for details on these items.
This manual is not binding. Stellar Industries, Inc. reserves the right to change, at any
time, any or all of the items, components, and parts deemed necessary for product
improvement or commercial/production purposes. This right is kept with no requirement or
obligation for immediate mandatory updating of this manual.
In closing:
If more information is required or technical assistance is needed, or if you feel that any
part of this manual is unclear or incorrect, please contact the Stellar Customer Service
Department by phone at 800-321-3741 or email at service@stellarindustries.com.
For Technical Questions, Information, Parts, or Warranty, Call Toll-Free at
800-321-3741
Hours: Monday - Friday, 8:00 a.m. - 5:00 p.m. CST
Or email at the following addresses:
Technical Questions, and Information
Order Parts
Warranty Information
Page iv | Stellar® TM7120 TireMan Owner’s Manual
service@stellarindustries.com
parts@stellarindustries.com
warranty@stellarindustries.com
Model TM7120 Specifications
20’(6.10m)
7200lbs(3265kg)
ROTATION
Capacity:7,200
7,200
@20
ft (3,265
@ 6.10m)
lbs lbs
@20
ft (3,265
kg kg
@ 6.10m)
to to
124”
(124
Clamping Span:49”26"
123"
(65cm
cmto
to314
311cm)
cm)
3.5” (8.9 cm) bore with integral pilot operated
3.5” (8.9 cm) bore with integral pilot operated
Clamp Cylinders:counterbalance valves
counter balance valves
Tilt Cylinder:
Provided by crane extension boom
Tilt Cylinder:300º
Provided
Body Rotation:
power by crane extension boom
Rotation System:
Hourglass worm gear
Body Rotation: 300º power
Clamping Pad Rotation:
Continuous 360º power
Rotation
System:
Hourglass
TireMan Tilt:
+79º
to -43º worm gear
Hydraulic Controls:
crane controls
Clamping Pad Rotation:Incorporated
Continuouswith
360ºthe
power
Approximate Shipping Weight:
2,450 lbs (1,110 kg) Standard
TireMan Tilt:2,900
+79º
-43º kg) With Rotary Pads
lbsto
(1,315
Capacity:
Clamping Span:
Clamp Cylinders:
Hydraulic Controls:
Approximate Shipping Weight:
Incorporated with the crane controls
2,750 lbs (1,247 kg) FP Version
3,300 lbs (1,497 kg) RP Version
3,450 lbs (1,565 kg) CRP Version
Stellar® TM7120 TireMan Owner’s Manual | Page 1
TM7120 Dimensional Layout
26” - Fixed Pads
28” - Rotating Pads
28” - Continuous Rotating Pads
123” - Fixed Pads
125” - Rotating Pads
125” - Continuous Rotating Pads
Page 2 | Stellar® TM7120 TireMan Owner’s Manual
General Installation
This chapter is designed to serve as a general guide for the installation of a Stellar TM7120
on a Stellar Service Crane. Each installation is considered unique so certain portions of this
chapter may or may not apply to your direct application. If a question should arise during
the installation process, please contact Stellar Customer Service at (800) 321 3741.
This crane is designed for use with a Stellar Service Crane installed on a vehicle that meets
the minimum chassis requirements of the crane. It is the installer’s responsibility to assure
that the unit is mounted on a platform that will support the maximum crane rating of this
crane.
WARNING Do not install this crane/manipulator on a body not capable of handling
the loads imposed on it. Failure to do so may result in serious injury or death.
Installer Notice
According to Federal Law (49 cfr part 571), each final-stage manufacturer shall complete
the vehicle in such a manner that it conforms to the standards in effect on the date of
manufacture of the incomplete vehicle, the date of final completion, or a date between
those two dates. This requirement shall, however, be superseded by any conflicting
provisions of a standard that applies by its terms to vehicles manufactured in two or more
stages.
Therefore, the installer of Stellar® Cranes and Bodies is considered one of the manufacturers
of the vehicle. As such a manufacturer, the installer is responsible for compliance with all
applicable federal and state regulations. They are required to certify that the vehicle is in
compliance with the Federal Motor Vehicle Safety Standards and other regulations issued
under the National Traffic and Motor Vehicle Safety Act.
Please reference the Code of Federal Regulations, title 49 - Transportation, Volume 5 (400999), for further information, or visit http://www.gpoaccess.gov/nara/index.html for the full
text of Code of Federal Regulations.
Stellar® TM7120 TireMan Owner’s Manual | Page 3
Torque Data Chart
­ hen using the torque data in the
W
chart, the following rules should be
observed:
• Bolt manufacturer’s particular
specifications should be consulted
when provided.
• Flat washers of equal strength
must be used.
• All torque measurements are
given in foot-pounds. To convert
to inch-pounds, multiply by 12.
• Torque values specified are for
bolts with residual oils or no special
lubricants applied.
• Torque values for socket-head
capscrews are the same as for
Grade 8 capscrews.
GRADE 5
GRADE 8
Size
Bolt DIA Plain Plated Plain Plated
(DIA-TPI) (Inches) (Ft-Lb) (Ft-Lb) (Ft-Lb) (Ft-Lb)
5/16-18
0.3125
17
13
25
18
3/8-16
0.3750
31
23
44
33
7/16-14
0.4375
49
37
70
52
1/2-13
0.5000
75
57
105
80
9/16-12
0.5625
110
82
155
115
5/8-11
0.6250
150
115
220
160
3/4-10
0.7500
265
200
375
280
7/8-9
0.8750
395
295
605
455
1-8
1.000
590
445
910
680
1 1/8-7
1.1250
795
595
1290
965
1 1/4-7
1.2500
1120
840
1815
1360
1 3/8-6
1.3750
1470
1100
2380
1780
1 1/2-6
1.500
1950
1460
3160
2370
GRADE 9
Plated
(Ft-Lb)
22
39
63
96
139
192
340
549
823
1167
1646
2158
2865
NOTICE
• Do not use these values if a different torque value or tightening
procedure is given for a specific application. Torque values listed are for general use
only. Check tightness of fasteners periodically.
• Shear bolts are designed to fail under predetermined loads. Always replace shear bolts
with identical grade.
• Fasteners should be replaced with the same or higher grade. If higher grade fasteners
are used, these should only be tightened to the strength of the original.
• T ighten plastic insert or crimped steel-type lock nuts to approximately 110 percent of the
dry torque values shown in the chart below, applied to the nut, not to the bolt head.
Tighten toothed or serrated-type lock nuts to the full torque value. Note: “Lubricated”
means coated with a lubricant such as engine oil, or fasteners with phosphate and oil
coatings. “Dry” means plain or zinc plated without lubrication. Tighten lubricated bolts
to approximately 80% of dry bolts.
Page 4 | Stellar® TM7120 TireMan Owner’s Manual
Hydraulic Installation
Never modify or alter any of the equipment, whether mechanical, electrical, or hydraulic,
without Stellar Industries’ approval.
WARNING Do not touch or grab any hoses that could be under pressure. Release
system pressure before attempting to make adjustments or repairs.
Do not attempt service or repair when PTO is engaged.
Disassemble and assemble hydraulic components on a clean surface.
Clean all metal parts in a nonflammable cleaning fluid. Then lubricate all components to
aid in assembly.
WARNING Hydraulic fluid expands when heated. This raises the pressure in an
unventilated tank. Release the tank pressure before removing the cap completely. Failure
to do so may cause the oil to shoot out of the tank very rapidly and cause severe burns.
WARNING Do not rely on the hydraulic fluid to support the boom or crane. If
hydraulic fluid escapes, the boom or crane can fall immediately. Make sure the ground or
blocking is supporting the boom before performing any maintenance or repair.
NOTICE
Contaminants in a hydraulic system affect operation and will result in
serious damage to the system components. Dirty hydraulic systems are a major cause of
component failures.
If evidence of foreign particles is found in the hydraulic system, flush the system.
When installing metal hydraulic tubes, tighten all fittings finger tight. Then , in order, tighten
the fittings at the rigid end, the adjustable end, and the mounting brackets. After tubes
are mounted, install the hoses. Connect both ends of the hose with all fittings finger tight.
Position the hose so it does not rub the machine or another hose and has a minimum of
bending and twisting. Tighten fittings in both couplings.
Due to manufacturing methods, there is a natural curvature to a hydralic hose. The hose
should be installed so any bend is with this curvature.
Stellar® TM7120 TireMan Owner’s Manual | Page 5
Hydraulic Pressure Settings
Main Relief 4600 psi
Function
Inner
Outer
Extension
Rotation
TM Rot
TM Pad Rot
TM Clamp
Flow (gpm)
10.6
10.6
10.6
10.6
6.6
6.6
6.6
Pressure (psi)
Extend Retract
4400
2200
4400
2200
4400
4400
2200
2200
2200
2200
2500
2500
4200
4200
Face Seal/O-Ring Size Chart
B
A
Hose Fitting Face Seal (A) O-ring Boss (B)
Size Size
Stellar® PN
Stellar® PN
1/4”
#4
C2027
D1245
3/8”
#6
C2028
D1246
1/2”
#8
C2029
D1247
5/8” #10
32223
D1248
3/4” #12
D1244
D1249
1”
#16
D1250
Page 6 | Stellar® TM7120 TireMan Owner’s Manual
PN 78071
Hydraulic Kit (FP Version) - PN 78071
Stellar® TM7120 TireMan Owner’s Manual | Page 7
PN 78019
Hydraulic Kit (RP Version) - PN 78019
Page 8 | Stellar® TM7120 TireMan Owner’s Manual
PN 78012
Hydraulic Kit (CRP Version) - PN 78012
Stellar® TM7120 TireMan Owner’s Manual | Page 9
Page 10 | Stellar® TM7120 TireMan Owner’s Manual
8
8
25
9
24
7
26
10
31
12
9
34
8
15
31
10
12
5
4
1 3
29
37
GEAR BOX REPLACEMENT KIT 39965
OUTPUT SHAFT ONLY 68662
OUTPUT SHAFT KIT 68667
OUTPUT SHAFT SEAL KIT 68663
C-BALANCE VALVE C6184
CYLINDER SEAL KIT 80989
CYLINDER BUSHINGS 4381
BUSHINGS INCLUDED IN 74351
15
31
10
12
23
3 38
CHECK OIL LEVEL
IN GEARBOX
13
5
18
14
4
35
33
32
12
5
20
31
4
22
19
16
3
1
14
31
27
36
4
6
12
37
2
3
17
30
TM7120 (FP Version) Breakdown - PN 77857
30
13
22
16
11
12
31
30
11
31
16
16
12
21
Stellar® TM7120 TireMan Owner’s Manual | Page 11
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
PART
0333
0339
0340
03 4 3
0420
0485
4379
4380
4381
5145
8377
10172
17148
17150
17315CR
17320
29722
29723
29725PC
DESCRIPTION
NUT 0.25-20 HHGR5 NYLOC
CAP SCR 0.25-20X2.50 HHGR5
W A SH ER 0 .2 5 U SS FL AT
W A SH ER 0 .3 1 U SS F LA T
CAP SCR 0.31-18X0.75 HHGR5
CAP SCR 0.31-18X1.25 HHGR5
BUSHING BPC32DXR40 2.00X2.50
BUSHING BPC32DXR24 2.00X1.50
BUSHING BPC32DXR32 2.00X2.00
PIN CAP 0.56X3.00X0.19 YZ
PIN CAP 0.56X3.50X0.19 YZ
CAP SCR 0.50-13X1.00 HHGR8
CAP SCR 0.75-10X3.00 HHGR9
WASHER 0.75 SAE FLAT YELLOW GR8
PIN 2.00X14.75 D&T
BUSHING BPC40DXR40 2.50X2.50
TURNTABLE BEARING 450-05110-1
GEARBOX 010(EAR 02356)
GEAR GUARD TM6120C
QTY.
3
2
6
12
10
2
8
16
16
24
3
30
30
30
8
4
1
1
1
DESCRIPTION
CAP SCR 0.88-9X2.5 0 SH
L INK TM 71 20
PIN TEAR DROP 2.50X11.81
BODY TM7120 V2
LINK TM7120 V2
CYLINDER 3.50X13.25
PIN 2.00X10.63 D&T
BASE TM7120 V2
ARM TM7120 V2
COVER TUBE TM7120 V2
ZERK 1/8 NPT STRAIGHT
WASHER 0.50 SAE FLAT YELLOW GR8
CAP SCR 0.50-13X1.25 SH
MOTOR HYD EATON 101-2493
LIGHT FLOOD LED 3.2X2.9 850LM 16W 1030V
GEAR GUARD TM6120C
HOSE CLAMP TM14160
CLAMP 0.75 BLK VINYL
CAP SCR 0.25-20X1.50 HHGR5
GASKET MOTOR 008-10056-1
VALVE COMB DIV FD10-44-6T-N-44
1
2
3
1
1
1
2
QTY.
4
1
3
1
4
2
4
1
2
1
12
30
2
1
NOT SHOWN:
21409 (1) WIRE HARNESS FLOOD LIGHT TM14160
54772 (1) DECAL KIT TM7120
78071 (1) HYD KIT TM7120 V2
D0240 (1) FTG 4-2 CPRSN-MP 90
D1810 (0.67 FT) TBE AIR SAEJ844 TYPE A .25 (RM)
D1345 (1) FTG 4-2 CPRSN-MP STRAIGHT
22161 (1) FTG 2-2 FP-FP COUPLER STRAIGHT BRASS
56589 (1) ZERK 1/8 NPT STRAIGHT LONG THREAD
9752 (2) CONNECT 2 PIN SHROUD PACKARD
9756 (4) CONTACT M TERM SHROUD 18-20
8384 (4) CABLE SEAL 18-20 PACKARD 39000
78431
29727
18042
c0082
0220
21151
35111
34
PART
30495
5 35 10
54385CR
74245
74345
74351
74650CR
75092
76762
78014
c1592
D0790
D1307
D1453
35
36
37
38
39
40
ITEM
20
21
22
23
24
25
26
27
28
29
30
31
32
33
TM7120 (FP Version) Bill - PN 77857
Page 12 | Stellar® TM7120 TireMan Owner’s Manual
14
37
15
24
8
14
36
37
37
30
12
45
8
14
26
14
37
10
18
12
37
14
44
29
5
43
9
33
12
37
14
11
C-BALANCE VALVE C6184
CYLINDER SEAL KIT 80989
CYLINDER BUSHINGS 4381
BUSHINGS INCLUDED IN 74351
32
11
4
5
48
40
10
18
37
12
14
6
5
35
1 3
GEAR BOX REPLACEMENT KIT 39965
OUTPUT SHAFT ONLY 68662
OUTPUT SHAFT KIT 68667
OUTPUT SHAFT SEAL KIT 68663
21
28
16
6
43 3 47
CHECK OIL LEVEL
IN GEARBOX
17
5
39
41
38
14
6
23
37
5
22
19
20
36
17
37
34
25
7
5
42
14
36
16
46
19
13
19
14
13
37
19
37
36
C-BALANCE VALVE C6184
CYLINDER SEAL KIT 20632
CYLINDER BUSHINGS 4381, 8819
BUSHINGS INCLUDED IN 41567
46
TM7120 (RP Version) Breakdown - PN 74244
14
Stellar® TM7120 TireMan Owner’s Manual | Page 13
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
0333
0339
0 34 0
0342
0343
0420
0485
0865
4379
4380
4381
5145
8377
10172
13315
17148
17150
17315CR
17320
29722
DESCRIPTION
NUT 0.25-20 HHGR5 NYLOC
CAP SCR 0.25-20X2.50 HHGR5
W A SH ER 0 .2 5 U S S FL AT
NUT 0.31-18 HHGR5 NYLOC
WASHER 0.31 USS FLAT
CAP SCR 0.31-18X0.75 HHGR5
CAP SCR 0.31-18X1.25 HHGR5
BUSHING BPC48DXR32 3.00X2.00
BUSHING BPC32DXR40 2.00X2.50
BUSHING BPC32DXR24 2.00X1.50
BUSHING BPC32DXR32 2.00X2.00
PIN CAP 0.56X3.00X0.19 YZ
PIN CAP 0.56X3.50X0.19 YZ
CAP SCR 0.50-13X1.00 HHGR8
PIN CAP 0.56X4.00X0.19 YZ
CAP SCR 0.75-10X3.00 HHGR9
WASHER 0.75 SAE FLAT YELLOW GR8
PIN 2.00X14.75 D&T
BUSHING BPC40DXR40 2.50X2.50
TURNTABLE BEARING 450-05110-1
QTY.
4
2
8
4
20
10
2
4
8
16
16
26
3
38
2
30
30
8
4
1
DESCRIPTION
GEARBOX 010(EAR 02356)
GEAR GUARD TM6120C
CAP SC R 0.88-9 X2 .50 S H
CYLINDER 3.50X13.25
L IN K TM7 1 20
PAD TM7120 SS ROT PADS
PAD TM7120 CS ROT PADS
BODY TM7120 V2
LINK TM7120 V2
ARM TM7120 CS PAD ROT V2
ARM TM7120 SS PAD ROT V2
CYLINDER 3.50X13.25
PIN 2.00X10.63 D&T
BASE TM7120 V2
COVER TUBE TM7120 V2
ZERK 1/8 NPT STRAIGHT
WASHER 0.50 SAE FLAT YELLOW GR8
CAP SCR 0.50-13X1.25 SH
MOTOR HYD EATON 101-2493
LIGHT FLOOD LED 3.2X2.9 850LM 16W 1078431
30V
29727
GEAR GUARD TM6120C
18042
HOSE CLAMP TM14160
c0082
CLAMP 0.75 BLK VINYL
41634CR PIN TEAR DROP 2.00X5.50
41632CR PIN TEAR DROP 2.00X3.88
54385CR PIN TEAR DROP 2.50X11.81
0482
CAP SCR 0.25-20X3.00 HHGR5
0486
CAP SCR 0.31-18X1.50 HHGR5
21151
GASKET MOTOR 008-10056-1
35111
VALVE COMB DIV FD10-44-6T-N-44
PART
29723
29725PC
3 04 95
41567
53510
67818
67819
74245
74345
74347
74348
74351
74650CR
75092
78014
c1592
D0790
D1307
D1453
1
2
12
2
2
3
2
4
1
2
2
QTY.
1
1
4
2
1
1
1
1
4
1
1
2
4
1
1
14
38
2
1
NOT SHOWN:
21409 (1) WIRE HARNESS FLOOD LIGHT TM14160
54772 (1) DECAL KIT TM7120
78019 (1) HYD KIT TM7120 V2 ROT PADS
D0240 (1) FTG 4-2 CPRSN-MP 90
D1810 (0.67 FT) TBE AIR SAEJ844 TYPE A .25 (RM)
D1345 (1) FTG 4-2 CPRSN-MP STRAIGHT
22161 (1) FTG 2-2 FP-FP COUPLER STRAIGHT BRASS
56589 (1) ZERK 1/8 NPT STRAIGHT LONG THREAD
9752 (2) CONNECT 2 PIN SHROUD PACKARD
9756 (4) CONTACT M TERM SHROUD 18-20
8384 (4) CABLE SEAL 18-20 PACKARD 39000
41
42
43
44
45
46
47
48
49
50
40
ITEM
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
TM7120 (RP Version) Bill - PN 74244
Page 14 | Stellar® TM7120 TireMan Owner’s Manual
46
28
14
34
37
36 35
33
10
31
14
56
42
58
9
17
11
39
13
23
40
34
38
5
4
27
55
5
52
10
8
44
11
9
45
17
11
39
39
29
13
13
C-BALANCE VALVE C6184
CYLINDER SEAL KIT 80989
CYLINDER BUSHINGS 4381
BUSHINGS INCLUDED IN 74351
10
25
32
6
5
43
GEAR BOX REPLACEMENT KIT 39965
OUTPUT SHAFT ONLY 68662
OUTPUT SHAFT KIT 68667
OUTPUT SHAFT SEAL KIT 68663
26
CHECK OIL LEVEL
IN GEARBOX
15
6
20
47
16
5
42
41
6
5
13
57
3
55
3
1
22
39
49
18
34
21
TM7120 (CRP Version) Breakdown - PN 76339
19
48
5
7
13
1
3
2
30
16
39
34
15
49
18
12
39
13
12
24
18
18
39
13
34
Stellar® TM7120 TireMan Owner’s Manual | Page 15
PART
0333
0339
0 34 0
0342
0343
0420
0485
4379
4380
4381
5145
8377
10172
12152
17148
17150
17315CR
17320
29722
29723
NOT SHOWN:
21409 (1) WIRE HARNESS FLOOD LIGHT TM14160
54772 (1) DECAL KIT TM7120
78012 (1) HYD KIT TM7120 V2 CONT ROT PADS
D0240 (1) FTG 4-2 CPRSN-MP 90
D1810 (0.67 FT) TBE AIR SAEJ844 TYPE A .25 (RM)
D1345 (1) FTG 4-2 CPRSN-MP STRAIGHT
22161 (1) FTG 2-2 FP-FP COUPLER STRAIGHT BRASS
56589 (1) ZERK 1/8 NPT STRAIGHT LONG THREAD
9752 (2) CONNECT 2 PIN SHROUD PACKARD
9756 (4) CONTACT M TERM SHROUD 18-20
8384 (4) CABLE SEAL 18-20 PACKARD 39000
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DESCRIPTION
NUT 0.25-20 HHGR5 NYLOC
CAP SCR 0.25-20X2.50 HHGR5
WA S H ER 0.2 5 U SS FL A T
NUT 0.31-18 HHGR5 NYLOC
WASHER 0.31 USS FLAT
CAP SCR 0.31-18X0.75 HHGR5
CAP SCR 0.31-18X1.25 HHGR5
BUSHING BPC32DXR40 2.00X2.50
BUSHING BPC32DXR24 2.00X1.50
BUSHING BPC32DXR32 2.00X2.00
PIN CAP 0.56X3.00X0.19 YZ
PIN CAP 0.56X3.50X0.19 YZ
CAP SCR 0.50-13X1.00 HHGR8
WASHER 0.63 FLAT SP
CAP SCR 0.75-10X3.00 HHGR9
WASHER 0.75 SAE FLAT YELLOW GR8
PIN 2.00X14.75 D&T
BUSHING BPC40DXR40 2.50X2.50
TURNTABLE BEARING 450-05110-1
GEARBOX 010(EAR 02356)
QTY.
2
1
4
4
20
10
2
8
16
16
24
3
30
62
30
30
8
4
1
1
47
48
49
50
51
52
53
54
55
56
57
58
59
60
46
45
34
35
36
37
38
39
40
41
42
43
44
33
32
31
ITEM
21
22
23
24
25
26
27
28
29
30
DESCRIPTION
QTY.
GEAR GUARD TM6120C
1
CAP S CR 0.8 8-9X2.5 0 SH
4
WASHER 0.44 SAE FLAT YELLOW GR8
4
LIN K TM7 12 0
1
CAP SCR 12MMX40MM SH
4
BODY TM7120 V2
1
LINK TM7120 V2
4
ARM TM7120 V2 PAD ROT PADS
2
PIN 2.00X10.63 D&T
4
BASE TM7120 V2
1
PAD TM7120 V2 ROT PADS TEARDROP
76178
2
CONT
76180
COVER TM7120 V2 RP
2
BEARING SWING DRIVE 9 IN ENCLOSED
76755
2
KINEMATICS
c1592
Z E R K 1 / 8 N P T ST R A I G H T
14
C2239 FTG 2-2 MP-FP STREET ELBOW 90
2
C2250 FTG 2-2X1.50 MP-MP NIPPLE STRAIGHT BLK
2
C 22 5 6 F T G C PLR P I PE 0 .1 3
2
C6021 CAP SCR 0.25-20X0.75 BTNHD SS
8
D0790 WASHER 0.50 SAE FLAT YELLOW GR8
30
D0 9 1 7 W A S H E R 0 . 2 5 F L A T S S
8
D1307 CAP SCR 0.50-13X1.25 SH
2
D1453 MOTOR HYD EATON 101-2493
3
78014
COVER TUBE TM7120 V2
1
2
74351
CYLINDER 3.50X13.25
LIGHT FLOOD LED 3.2X2.9 850LM 16W 1078431
2
30V
CAP
SCR
0.63-11X4.00
HHGR8
W/RED
77555
30
PATCH
29727
GEAR GUARD TM6120C
1
18042
HOSE CLAMP TM14160
2
54385CR PIN TEAR DROP 2.50X11.81
3
0346
W A S H E R 0 . 3 8 U S S FL A T
2
0347
NUT 0.38-16 HHGR5 NYLOC
1
0486
CAP SCR 0.31-18X1.50 HHGR5
4
C0944 CAP SCR 0.38-16X1.75 HHGR5
1
D1447 CLAMP 2.00 HK 3317
1
c0082
CLAMP 0.75 BLK VINYL
10
C 1 5 9 7 Z ER K 1 / 8 N P T 9 0 D E G
6
0482
CAP SCR 0.25-20X3.00 HHGR5
1
8522
CAP SCR 0.63-11X4.50 HHGR8
32
21151
GASKET MOTOR 008-10056-1
1
35111
VALVE COMB DIV FD10-44-6T-N-44
1
PART
29725PC
30 49 5
42788
53510
62484
74245
74345
74437
74650CR
75092
TM7120 (CRP Version) Bill - PN 76339
Decal Placement - PN 54772
5
6
PN 54772
ITEM
PART NO.
DESCRIPTION
QTY
01
54769
DECAL RATED LOAD
2
02
22618
DECAL GREASE WEEKLY
2
03
22617
DECAL ROTATION BEARING
1
04
54782
DECAL RATED LOAD
2
05
54599
DECAL IDENTIFICATION TM7120
2
06
53850
DECAL STELLAR LOGO 4.00X11.5
2
Last Revision
Rev Level:
Page 16 | Stellar® TM7120 TireMan
Owner’s Manual
Date:
By:
Stellar® TM7120 TireMan Owner’s Manual | Page 17
Subject to Change without Notification.
© 2016 Stellar Industries, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising