INSTALLATION PARTS INCLUDED
INSTALLATION
TRANSFORMER THROTTLE BOSS
6294
877.370.3604 (toll free)
PARTS INCLUDED
1
1
1
4
1
INSTALLATION QUESTIONS
Transformer Throttle Boss
Transformer Throttle Boss Plate
5/16”-18 x 5/8” Socket Head Cap Screw
#4-40 x 9/16” Socket Head Cap Screws
Installation Instructions
techsupport@kuryakyn.com
or call 715.247.2983
LIMITED WARRANTY
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND NOTICES REGARDING THE USE
AND CARE OF THIS PRODUCT.
This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality.
This indication alerts you to the fact that ignoring
the contents described herein can result in potential
injury.
IF INSTALLING THIS PRODUCT FOR ANOTHER PARTY,
PLEASE MAKE SURE THEY RECEIVE THIS COPY OF THE
INSTALLATION INSTRUCTIONS SO THEY ARE AWARE OF
THE IMPORTANT INFORMATION CONTAINED IN THEM.
TOOLS SUGGESTED
Set of Hex Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
NOTE: Pictures and instructions are for the right side grip. Installation of the
Transformer Throttle Boss on the left grip will be the same.
PIC 1
STEP 2
-cont.6294-22HD-1012
CUSTOMER SERVICE
Remove the four socket head
cap screws in the end of the
right side (throttle) grip.
PIC 1 Set the screws aside for
now, they will be re-used.
REMOVE THESE FASTENERS
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
●The product must be properly installed,
maintained and operated under
normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
STEP 3
Remove the transformer cap; set it aside.
STEP 4
Place the Throttle Boss plate over the exposed end of the grip. PIC 2
STEP 5
Place the end cap knurled spacer over the Throttle Boss plate. PIC 3
STEP 6
Place the transformer end cap with center stud over the end cap knurled
spacer.
PIC 2
THROTTLE BOSS PLATE
STEP 7
Secure the assembly together with the four screws removed in Step 2.
Do not over tighten the screws.
STEP 8
Place the throttle boss “blade” on the throttle boss plate and secure it
with the 5/16-18 x 5/8 Socket Head Cap Screw. The flat side of the
“blade” needs to be flush with transformer grip. PIC 4
STEP 9
Ensure proper clearance and operation before riding the motorcycle.
Ensure that the installation of this product does not
interfere with the proper operation of the motorcycle
before riding.
PIC 3
PIC 4
END CAP KNURLED SPACER
FLAT SIDE NEXT TO GRIP
It is the installer’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened before
operation of the motorcycle. Küryakyn will not provide
warranty coverage on products or components lost due to
improper installation or lack of maintenance. Periodic
inspection and maintenance are required on all fasteners.
Throttle Boss Adjustment
SOCKET HEAD CAP SCREW
STEP 1
Loosen the four socket head cap screws in the end of the grip. PIC 5
PIC 5
STEP 2
Adjust the position of the throttle boss as desired (PIC 5) and retighten
the screws; do not over tighten the screws. You can also change the
positioning of the “blade” of the throttle boss by loosening the
5/16-18 x 5/8 Socket Head Cap Screw and rotating the “blade” portion to
the best rider positioning.
It is the installer’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened before
operation of the motorcycle. Küryakyn will not provide
warranty coverage on products or components lost due to
improper installation or lack of maintenance. Periodic
inspection and maintenance are required on all fasteners.
LOOSEN
THIS TO
ROTATE
BLADE
LOOSEN
THESE TO
ROTATE
THROTTLE
BOSS
PAGE
2
Ride On!
TRANSFORMER THROTTLE BOSS
INSTALLATION
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising