Product Cutsheet
POWER PATROL
Revenue Grade Power Meter
The Setra Power Patrol is every electrical contractor’s dream.
The Revenue Grade networked 3-phase power meter works
with Rogowski Coils and has a small enough form factor to be
mounted inside or outside of the panel using either mounting tabs or the DINrail clip making it the easiest installation
in the industry.
Rogowski and CT Compatible
The Power Patrol works with either Rogowski Coil “flex” CT’s
or conventional split-core CT’s. The ability to have interchangeable CT’s gives added flexibility for last minute changes at the job site. The Power Patrol is embedded with the
necessary amplifier/integrator circuity for the Rogowski coil
CT’s, eliminating the need to provide external power.
n
n
Easy USB Configuration
Power and configure the meter through your computer’s
USB port using the Power Patrol HeadStart software. While
other meter’s require configuration in a live enclosure, the
Power Patrol can be easily configured outside of the panel,
eliminating the risk of arc flash. HeadStart can save meter
settings, allowing the installer to clone meter profiles quickly
and easily.
Field Selectable Communication (4-in-1)
Each Power Patrol comes with field selectable Modbus and
BACnet communication. Communications interface to the
Power Patrol is through either an RS-485 serial connection
(BACnet MS/TP / Modbus) or over Ethernet (BACnet IP / Modbus TCP).
Line Powered From 80-600V
The Power Patrol series instruments are line-powered and do
not require external power. Its power supply can accommodate service voltage ranging from 80-600V (phase-to-phase).
The Power Patrol has 3 LED indicators (Red/Green) which
confirm proper CT-to-phase installation.
n
Configure & Power Through USB
Field Selectable BACnet/Modbus (4-in-1)
5 Year Warranty
Power Patrol Features:
• Revenue Grade Approved by NRTL
• Configure & Power Through USB
• Eliminate Setup Within Live Enclosure
• UL 610 Rated & BTL Certified
• Phase-Check LED’s Confirm Wiring
• Rogowski Coil & Split-Core CT Compatible
• Field Selectable BACnet/Modbus (4-in-1)
• Broadband Power Supply (80-600V)
• Optional Display For Setup and Monitoring
• ANSI C12.20-2010 Class 0.2
• Bidirectional
• DINrail Mount
• Digital Pulse Output
Applications:
• Measurement & Verification
• Demand Response
• Energy Cost Allocation
• Equipment Efficiency Tracking
• Preventative Maintenance
Phone: 800-257-3872 • Fax: 978-264-0292 • setra.com © Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc.
Power Patrol
Revenue Grade Power Meter
ACCESSORIES
ORDERING INFORMATION
S P P
Model
Communication Port
SPP= Setra Power Patrol
Display
E
Ethernet & Serial
D
Display
S
Serial Only (RS-485)
N
No Display
MODBUS REGISTER/BACNET
OBJECT DESCRIPTION LIST
System True Energy (kWh)
Individual Phase to Phase Voltages
Instantaneous Total True Power (kW)
Line Frequency (Hz)
Peak Demand (Adjustable Window) (kW)
Individual Phases True Energy (kWh)
Maximum Instantaneous Power (kW)
Individual Phases True Power (kW)
System Reactive Energy (kVARh)
Individual Phases Reactive Energy (kVARh)
System Apparent Energy (kVAh)
Individual Phases Reactive Power (kVAR)
System Apparent Power (kVA)
Individual Phases Apparent Energy (kVAh)
System Displacement Power Factor (dPF)
Individual Phases Apparent Power (kVA)
System Apparent Power Factor (aPF)
Individual Phases Apparent Power Factor
(aPF)
Average Current (Amps)
Individual Phases Displacement Power
Factor (dPF)
Average Line to Line Voltage (Volts)
Individual Phases Current (Amps)
Average Line to Neutral Voltage (Volts)
Individual Phases Line to Neutral Voltages
(Volts)
Multiple Meters External Data
Synchronization
Individual Phases Line to Line Voltages
(Volts)
Refer to Operating Manual For Complete List
900900-G
USB Communication Cable, Type A to B, Power Patrol
900901-G
USB Flash Drive, HeadStart Software, Power Patrol
SPP-ACC-ENC1
Enclosure Kit
SPP-ACC-LEADS-208
Voltage Leads 208 VAC
SPP-ACC-LEADS-480
Voltage Leads 480 VAC
SPP-ACC-FUSE-208
Fuse Leads 208 VAC
SPP-ACC-FUSE-480
Fuse Leads 480 VAc
GENERAL SPECIFICATIONS
Technical
Communications
Service Type
Single Phase, Three Phase-Four Wire
(WYE), Three Phase-Three Wire (Delta)
Direct
BACnet IP, BACnet MS/TP, Modbus TCP, Modbus RTU
Power
From L1 Phase to L2 Phase. 80-600VAC CAT
III 50/60Hz, 70 mA Max. Non-user replaceable 0.5 Amp internal fuse protection
Max
Distance
1200 meters with data rate of
100K bits/second of less
Voltage
Channels
80-346 Volts AC Line-to-Neutral, 600V
Phase-to-Phase, CAT III
Baud Rate
Modbus: 9600 (default), 19200,
38400, 57600, 76800 & 115200.
BACnet: 9600, 19200, 38400 &
76800 (default).
Current
Channels
3 Channels, 0.67 VAC max, 333 mV CT’s,
0-4,700 Amps depending on CT
Data Bits
8
Maximum
Current Input
200% of current transducer rating (mV CTs) Parity
Measure up to 5000A with Patrol Flex
None, Even, Odd
Measurement
Type
True RMS using high-speed digital signal
processing (DSP)
Stop Bit
2, 1
Line Frequency 50/60
Data
Formats
Modbus or BACnet
Waveform
Sampling
12 kHz
Mechanical
Parameter
Update Rate
.5 seconds
Operating
-7o to 60o C (-20o to 140o F)
Temperature
Measurements
Volts, Amps, kW, kWh, kVAR, kVARh, kVA,
aPF, dPF (Partial List)
Humidity
5% to 95% non-condensing
Accuracy
0.2% (<0.1% typical) ANSI C12.20-2010
Class 0.2
Enclosure
ABS Plastic, 94-VO
flammability rating
Resolution
0.01 Amp, 0.1 Volt, 0.01 watt, 0.01 VAR,
0.01 VA, 0.01 Power Factor depending on
scalar setting
Weight
340 g (12 ounces, exclusive of
CT’s)
LED Indicators
Bi-color LEDs (red and green): 1 LED to
indicate communication, 2 LEDs for correct
CT-to-phrase installation (per meter
element), 1 LED for pulse
Dimensions
23.0 x 9.0 x 4.0 cm, (9.0” x 3.5”
1.5”)
Pulse Output
Open Collector, 5mA max current, 30V max
open voltage
Safety
Power Patrol UL Listed and CE Mark, Conforms
Serial and
to UL Std 61010-1
Ethernet
SSP-SPP Rev A 05/15
Phone: 800-257-3872 • Fax: 978-264-0292 • setra.com © Setra Systems, Inc. All rights reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising