POE1210-4P
Power Over Ethernet
POE1210-4P
Product Overview
The POE1210-4P is a PoE powered 12V dc power
supply with battery back-up capability. Receiving its
power remotely from a PoE device (802.3af) such as
an injector or switch, it eliminates the requirement for
mains power at the device location. It provides up to
four separate fused outputs via a 4-way fuse output
module. Fuse values can be changed to obtain the
required outputs/rating as shown in the table below:
No of
Fuses
Fuse
Value
Max Current
per Output
4
250mA
4 x 200mA
3
300mA
3 x 266mA
2
500mA
2 x 400mA
1
1.0A
1 x 800mA
Product is supplied with 4 x 250mA fuses.
Features
• Powered remotely by a PoE PSE device (802.3af)
(not supplied)
• Provides 4 x 12V dc at 200mA (max)
• Can be used in CCTV, access control or general
12V dc applications
• Supplies battery back-up on loss of PoE power
• IP68 enclosure
• Available Ethernet connection for network data
• Uses Li-Po battery technology with overload and
short circuit protection
• 1 year warranty
POE1210-4P
Technical Information
Input
PoE 802.3af
Output
12V dc
Maximum current
800mA
Operating temperature -10°C to 40°C
Product Dimensions and Weight
H x W x D: 250mm x 150mm x 100mm
Weight approx 550g
Battery Backup Times
Total Load
Back-up Time (approx)
200mA
164 minutes
400mA
84 minutes
800mA
27 minutes
Approvals
CE Mark
RoHS Compliant
Elmdene International Limited
3 Keel Close, Interchange Park,
Portsmouth, Hampshire, PO3 5QD, UK.
Tel: +44 (0)23 9269 6638
Fax: +44 (0)23 9266 0483
Email: sales@elmdene.co.uk
© 2011-2012 Elmdene International Limited
Specifications subject to change without notice.
ELM0020-2012-Issue 1C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising