Testo_310_Technical
testo-310-P01
26.04.2013
12:33
Seite 1
We measure it.
Flue gas analyser
testo 310 – Flue gas analysis the
easy way
Robust design for daily use
O2
Battery lifetime up to 10 hours
Integrated measurement menus: Flue gas, draught, ambient
CO 2
CO and pressure
Fast sensor zeroing in only 30 seconds
CO
Testo confirms that the Testo 310 product conforms to
EN50379 and is suitable for engineers working to BS7967
HPA
Documentation of measurement results via printer with
infrared interface
QA
°C
The new flue gas analyser testo 310 combines simple
as required on site thanks to the infrared interface printer
functions with a high level of masurement accuracy, and is
specially developed for the testo 310. The current
therefore perfectly suited to all basic measurements on a
measurement value can be printed out from all
heating system. Long battery lifetimes of up to ten hours
measurement menus, either during or after the
guarantee high availability. Its easy handling and compact
measurement. The testo 310 offers all advantages of
design make the testo 310 a robust tool for day-to-day work
electronic flue gas measurement in high quality at a perfect
– even when things get rough. Clear reports can be created
cost/benefit ratio.
testo-310-P02
26.04.2013
12:33
Seite 2
testo 310
We measure it.
Product properties
Robust
Robust and light instrument for daily use – ideal
even for tough and dirty surroundings
Backlit display
Two-line display and clear menu structure. Simple
to operate and easy to read.
Fast sensor zeroing
Automatic zeroing of gas sensor in only 30
seconds after starting up, which can be cancelled
if not required.
Lithium rechargeable battery
Operation with a Lithium rechargeable battery
(1500 mAh) – no change of battery necessary, up
to ten hours running time, charging via USB
connection possible.
Probe filter
Can be changed quickly and easily.
Attachment
Integrated magnets for easy attachment to the
burner.
Condensate trap
Integrated condensate trap – can be emptied very
quickly and easily.
Printer
Documentation via infrared printer.
testo-310-P03
26.04.2013
12:34
Seite 3
testo 310
We measure it.
Ordering data
testo 310 flue gas set
testo 310 flue gas set with printer
testo 310 incl. battery and calibration protocol
for the measurement of O2, CO, hPa and °C;
probe 180 mm with cone; case; mains unit incl.
cable; silicon hose for pressure measurement;
particle filter 5 off.
testo 310 incl. battery and calibration protocol for
the measurement of O2, CO, hPa and °C; IR
printer (0554 3100); probe 180 mm with cone;
case; mains unit incl. cable; silicon hose for
pressure measurement; particle filter 5 off; 2 rolls
spare thermal paper for printer.
Part no. 0563 3100
Part no. 0563 3110
Testo IR printer
Testo IR printer with wireless infrared interface,
1 roll thermal paper and 4 AA batteries.
Part no. 0554 3100
Accessories
Product sets
Part no.
testo 310 flue gas set
0563 3100
testo 310 flue gas set with printer
0563 3110
Accessories for measuring instrument
USB mains unit incl. cable
0554 1105
Testo IR printer
0554 3100
Testo fast printer IRDA
0554 0549
Spare thermal paper for printer, permanent ink
0554 0568
Spare particle filter
0554 0040
Spare gas sensors
Replacement O2 sensor
0390 0085
Spare CO sensor
0390 0119
testo-310-P04
26.04.2013
12:35
Seite 4
We measure it.
testo 310
Technical data
Accuracy ±1 digit
Resolution
Adjustment time t90
Temperature
(flue gas)
0 to +400 °C
±1 °C (0 to +100 °C)
±1.5% of mv (>100 °C)
0.1 °C
〈
50 s
Temperature
(ambient
temperature)
-20 to +100.0 °C
±1 °C
0.1 °C
〈
50 s
Draught
measurement
-20 to +20 hPa
±0.03 hPa (-3.00 to +3.00 hPa)
±1.5% of mv (remaining range)
0.01 hPa
Pressure measurement
-40 to 40 hPa
±0.5 hPa
0.1 hPa
O2 measurement
0 to 21 Vol. %
±0.2 Vol. %
0.1 Vol. %
30 s
CO measurement
(without H2
compensation)
0 to 4000 ppm
±20 ppm (0 to 400 ppm)
±5% of mv (401 to 2000 ppm)
±10% of mv (2001 to 4000 ppm)
1 ppm
60 s
Ambient CO
measurement
0 to 4000 ppm
±20 ppm (0 to 400 ppm)
±5% of mv (401 to 2000 ppm)
±10% of mv (2001 to 4000 ppm)
1 ppm
60 s
Efficiency
(ETA)
0 to 120 %
-
0.1%
-
Flue gas loss
0 to 99.9%
-
0.1%
-
Storage temp.
-20 to +50 °C
Display
Oper. temp.
-5 to +45 °C
Weight with probe
Approx. 700 g
Power supply
Battery: 1500 mAh, mains unit 5V/1A
Dimensions
201 x 83 x 44 mm
Warranty
Memory
No memory
Measuring instrument, flue gas probe,
gas sensors:
24 months
Thermocouple:
12 months
Battery:
12 months
Backlit 2-line display
Subject to change without notice.
All prices are net and valid until 31.12.2013.
Shipping costs & VAT not included.
General technical data
0981 2671/msp/A/04.2013
Meas. range
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising