DXA 1802 Dual Channel Amplifier
Dual Channel Power Amplifier
DXA-1802
900+900 WATTS  AC Operation
Ahuja introduces DXA-1802, a rugged and most reliable dual channel amplifier. It sets a new benchmark for professionals requiring
a sonically superior, high power amplifier. It has been designed to operate under stringent working conditions such as wide voltage
fluctuations due to gensets/AC mains and high ambient temperatures. Adequate safeguards have been built-in to counter such adverse
working conditions. Ease of operation, combined with service accessibility has been optimized in the design.
specifications
Continuous Rated Power
Stereo/Mono
8 Ω
370W + 370W RMS
4 Ω 650W + 650W RMS
2 Ω
900W + 900W RMS
Bridged Output
8 Ω 1300W RMS
4 Ω
1800W RMS
8 Ω 385W RMS
4 Ω 720W RMS
2Ω 1100W RMS
Single Channel Driven Output
THD + N
0.5%
Frequency Response (-1dB)
20-20,000Hz
Power Bandwidth (0.5% THD)
20-20,000Hz
Input Sensitivity
0dBm (775mV)
Input Impedance
10k Unbalanced , 20k Balanced
S/N Ratio
95dB
Channel Separation
65dB at 1kHz
Damping Factor
400 : 1 (8 Ω)
Slew Rate
35V/µs
Protections
Temperature, DC, RFI, Short Circuit, Overload, AC over voltage, Built-in limiter
Input Connectors
2 × XLR, Stereo Phone Jack 6.3mm
Output Connectors
Speakon 4-Way, Heavy Duty Screw Terminals each channel
CoolingVariable Speed DC Fan with Temperature Sensing
Front Panel Controls
2× 21 Step Level Attenuators
Indicators
ON, Mode (Stereo, Mono, Bridge) Signal levels, Clip, Temperatures, Fault, Overload (Ch. A & B)
Power Consumption
3000VA @ 240V / 50Hz
Dimensions
W482 × H165 × D500mm
Weight
26.0kg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising