1480 SP CH UN130

1480 SP CH UN130
AA Portable Power Corp.
www.batteryspace.com
www.batteryspace.com, Email: Sales@batteryspace.com
825 S 19th Street, Richmond, CA 94804
Tel: 510-525-2328 Fax: 510-439-2808
Specification & Instruction
of
Universal Smart Charger
CH
CH-UN130
AA Portable Power Corp.
www.batteryspace.com, Email: Sales@batteryspace.com
825 S 19th Street, Richmond, CA 94804
Tel: 510-525-2328 Fax: 510-439-2808
Specification:
•
Feature
•
•
•
•
•
Function
•
•
Safety
Protection
Dimension
Weight
•
Designed for 2.4V - 7.2V NiNH/NiCd battery pack with capacity which
is more than 600mAh
Input Power: 100V - 240V AC worldwide power support
Output Power: 2.4V - 7.2V, 0.6A/1.2A (various options)
Best Performance on 4.8V - 7.2V NiNH/NiCd battery
Can be utilized as a battery charger module for any DC device
Automatic voltage detection with LED indicator (red/green) during
charging process
Activating: Alternatively blinking red and green twice
Charging: Red
Fully charged: Blinking Green
Automatic cut-off charging function by MCU
Two adjustable current level (0.6A/1.2A)
0.6A for the battery which has more than 600mAh or equal to 1200mAh
1.2A for the battery which has more than 1200mAh
A fuse is installed in the circuit of the charger to prevent over current,
short circuit, and reverse polarity
L 1.5” X W 2.5” X H 5.5”
14oz (397g)
LED Indicator
0.6A/1.2A Switch
AA Portable Power Corp.
www.batteryspace.com, Email: Sales@batteryspace.com
825 S 19th Street, Richmond, CA 94804
Tel: 510-525-2328 Fax: 510-439-2808
Instruction:
Please carefully read the following instruction before you start to use this charger.
Caution:
• This charger is only for Indoor use
• The charger shall be placed on a fixed horizontal surface when the charger is
operated
• Avoid storing or operating the charger in highly humid place
or any place with inflammable good
• Do not cover the charger when the charger is operated
The ambient temperature shall not excess 40 ˚C
• Do not charge the battery on the list below
Voltage < 2.4V, or Voltage > 7.2V
Capacity < 600mAh
• Battery must be made by high drain current cell
• Completely plug the power cord into AC power resource
Do not expose any metal part of the power cord during operation
Do not use your hand or any of your body to touch the metal part of the
power when you connect the power to the charger
• Do not disassembly the charger any time
• AA Portable Power is not responsible for any damage caused by any
misusage
Operation Steps:
1. Connect the battery to the output of charger with correct polarity
(Red cable connects to positive, Black cable connects to negative)
2. Select proper constant current mode (see specification) by switch
3. Connect the power cord to the charger
4. Plug the power cord into the AC power resource
5. At the beginning of the charging process, the LED indicator will alternatively
blink Red and Green twice. When it is in charging process, the LED indicator turns
Red. When the battery is fully charged, the LED indicator will blink Green
6. The charging time is variable depends on the battery
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising