Focusing On Your Needs
802.11g (OFDM) 500mW Outdoor
This 802.11g 500mW amplifier is Teletronics' latest development
under the Bi-Directional RF Amplifier product line. These amplifiers are
especially designed for excellent signal linearity with a low noise figure
to achieve the maximum throughput allowed in the OFDM spectrum.
Reliable and cost-effective, this achievement would allow you to increase
the range of your wireless link and with only 10dBm input power, you can
achieve 27dBm (500mW) OFDM output power.
Item# 12-234
Designed for extending the range of 2.4 GHz wireless radio devices,
this amplifier is particularly effective when used with Direct Sequence
Spread Spectrum (DSSS), Frequency Hopping Spread Spectrum (FHSS),
and 802.11g Orthogonal Frequency Division Multiplexing (OFDM) radio
Technical Specifications
802.11g 500mW Outdoor
Operating Range:
2400 - 2500 MHz
Operating Mode:
Bi-Directional, TDD
Transmit Gain:
17 dB
Frequency Response:
+/- 1dB
Output Power:
500mW (+27dBm)
TX Input Power:
Receiver Gain:
15dB Typical
Noise Figure:
3.5dB Typical
LED Indicators:
RED: Solid On: Power and Receiving mode/Off: No Power
GREEN/ORANGE: Blinking: Transmitting
N-Type Female 50 Ohm
Lightning Protection:
Quarter Wave Technology
DC Surge Protection:
600Watts TVS@ 12VDC
Power Consumption:
Tx = 1.2A, Rx = 130 mA @ 9VDC4
Operating Temperature:
-40°C to + 70°C
4.25" L x 3.25" W x 1.75" H
2 Choke Cherry Road Rockville, MD 20850 Tel: 301.309.8500 Fax: 301.309.8851 Email: sales@teletronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF