Bissell | POWERWASH PRO | User`s guide | Bissell POWERWASH PRO User`s guide

Bissell POWERWASH PRO User`s guide
PowerWash™ Pro
USER’S GUIDE
1697 SERIES 220-240V
3
Safety Instructions
4-5 Product View
6
Assembly
6-7 Special Features
7-12 Operation
12 Maintenance and Care
13-14 Troubleshooting
14 Consumer Services
15 Replacement Parts
16 Warranty
ug120-4002_1697E_707.indd 1
9/8/08 10:09:26 AM
Thanks for buying a BISSELL PowerWash™Pro™
We’re glad you purchased a BISSELL PowerWash Pro upright deep cleaner.
Everything we know about floor care went into the design and construction
of this complete, high-tech home cleaning system.
Your PowerWash Pro is well made, and we back it with a limited one-year
warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your PowerWash Pro.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
22
www.bissell.com
ug120-4002_1697E_707.indd 2
9/8/08 10:09:28 AM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
Read all instructions
before using your
upright Deep Cleaner.
Always connect to a properly Earthed
outlet. Unplug from outlet when not in
use and before conducting
maintenance or troubleshooting.
WARNING:
To reduce the
risk of fire, electric shock, or injury:
■ U se indoors only
■ Do not immerse
■ Use only on surfaces moistened by
cleaning process
■ Do not leave machine when it is plugged in
■ Do not service machine when it is plugged in
■ If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent in order
to avoid a hazard
■ Do not use machine if it has been dropped,
damaged, left outdoors or dropped into water
■ Do not expose to rain, store indoors
■ Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around sharp
corners or edges, run appliance over cord, or
expose cord to heated surfaces
■ Do not carry the appliance while in use
■ Do not unplug by pulling on cord; unplug by
grasping plug not the cord
■ Do not handle plug or appliance with wet hands
■ Do not put any object into appliance openings, use
with blocked opening or restrict air flow
■ Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts
■ Do not pick up hot or burning objects
■ Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene, etc.) or use
in the presence of explosive liquids or vapours
■ Do not use appliance in an enclosed space filled with
vapours given off by oil base paint, paint
thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapours
www.bissell.com
ug120-4002_1697E_707.indd 3
■ R emove plug from electrical outlet before cleaning
or maintaining the appliance
■ Not intended for use by young children or infirm
persons without supervision
■ Young children should be supervised to ensure
that they do not play with the appliance
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, petrol, etc.)
■ Do not modify the Earthed plug
■ Do not allow to be used as a toy
■ Do not use for any purpose other than described
in this User’s Guide
■ Use only manufacturer’s recommended
attachments
■ Use only cleaning products formulated by
BISSELL for use in this appliance to prevent
internal component damage
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface
■ Turn off all controls before unplugging
■ Be extra careful when cleaning stairs
■ Pay close attention when working
around children
SAVE THESE
INSTRUCTIONS.
This model is for household use only.
WARNING:
This appliance must be Earthed.
IMPORTANT
FOR OPERATION ON
A 220-240 VOLT A.C. 50/60 Hz POWER
SUPPLY ONLY.
If your appliance is fitted with a nonrewireable
BS 1363 plug it must not be used unless a 13
amp (ASTA approved to BS 1362) fuse is fitted in
the carrier contained in the plug. Spares may be
obtained from your BISSELL supplier. If for any
reason the plug is cut off, it must be disposed
of, as it is an electric shock hazard should it be
inserted into a 13 amp socket.
3
9/8/08 10:09:29 AM
Product view
Lower Handle
Optional Accessories:
ReadyTools™ Dial
Belt Access Door
Floor Nozzle Window
These items are available for purchase with your model. To order replacement parts or additional tools or
formulas, please refer to page 15.
3” Tough Stain Brush
4
4” Upholstery Tool
PreTreat Wand
TurboBrush™
Spraying Crevice Tool
www.bissell.com
ug120-4002_1697E_707.indd 4
9/8/08 10:09:31 AM
Product view
Spray
Trigger
Keep plenty of genuine BISSELL deep
cleaning formulas on hand so you can
clean whenever it fits your schedule.
Always use genuine BISSELL deep
cleaning formulas. Non-BISSELL
cleaning formulas may harm the
machine and will void the warranty.
Cord Clip
Upper Handle
Tool Caddy
Quick Release™
Cord Wrap
Power Switch
Tough Stain
Brush Storage
Tank-inTank™
Hex Nuts
Handle
Release
4" Upholstery
Tool Storage
(Select Models)
Flex Hose
BISSELL Formulas:
1.42 L
Fiber Cleansing
Formula™ with
Scotchgard™
protector
item # 710E
1.42 L
Multi-Allergen
Removal™ Formula
with Scotchgard™
protector
item # 720E
www.bissell.com
ug120-4002_1697E_707.indd 5
1.42 L
Pet Odor and Soil
Removal™ Formula
with Scotchgard™
protector
item # 730E
1.42 L
Natural Orange
Extract Formula™ with
Scotchgard™ protector
item # 740E
1.42 L
Lavender Essence
Formula™ with
Scotchgard™ protector
item # 750E
5
9/8/08 10:09:47 AM
How to use this guide
This user’s guide has been designed to help you
get the utmost satisfaction from your BISSELL
PowerWash Pro. You’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this user's guide thoroughly before
assembling your deep cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this user’s guide will greatly enhance
your ability to get the most performance from your
BISSELL PowerWash Pro for many years.
W
arning:
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
1
2
3
4
5
6
Assembly
Your PowerWash Pro comes in three, easy to
assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to assemble your
cleaner is a Phillips head
screwdriver.
Refer to Assembly Diagram on page 5
1. Slide upper handle onto lower handle.
2. Feed bundled power cord through tool caddy from
caddy’s flat side.
3.
4.
Align upper handle holes and tool caddy holes.
5.
6.
7.
Insert 2 screws into lower 2 holes. Turn until snug.
Place hex nut into back of tool caddy and hold in
place. Insert bolt from front to back, turning into
the hex nut until snug. Do not over tighten. Repeat
for the second bolt and hex nut.
7
Snap tools into storage on the tool caddy.
Wrap power cord and flex hose as shown in figure 7.
PowerWash Pro assembly is now complete.
Special features
Your BISSELL PowerWash Pro deep cleaner is a
home cleaning system that uses a combination
of hand hot tap water, BISSELL deep cleaning
formulas and suction to safely clean carpets and
upholstery.
6
www.bissell.com
ug120-4002_1697E_707.indd 6
9/8/08 10:09:50 AM
Special features
Measuring Cup
Your deep cleaner is equipped with a measuring cup
for adding the proper amount of cleaning formula to
the water tank.
Tank-in-Tank™
Our 2-in-1 water tank system is designed with a heavy
duty bladder inside for clean water. As you clean, the
clean water and cleaning formula in the bladder will
empty. Dirty water pulled out of your carpets will
collect around the outside of the bladder so that clean
and dirty water are always kept separate. This allows
you to maximize tank space, yet only carry one tank to
and from the sink for emptying and filling.
ReadyTools Dial
This provides either floor cleaning or above the floor
cleaning with the flip of a switch. If choosing above floor
cleaning for upholstery, stairs, or along the baseboards,
choose the attachment appropriate for the job. Attach tool
to the hose, and you are ready to go!
S
TOOL
R NG
NI
FLOO
CLEA
Operation
ReadyTools Dial
LS
TOO
Before you clean
Move furniture to another area if cleaning an entire
room (optional).
3.
4.
Thoroughly vacuum area with a dry vacuum
cleaner before deep cleaning.
Plan your cleaning route to leave an exit path. It is best to
begin cleaning in the corner farthest from your exit.
EXIT
9
10
11
12
5
8
7
6
——
—
1
——
3'
2.
—
S
HT
Plan activities to give your carpet time to dry.
A
— ER RT
— E
—
4'
—
—
—
1.
OR ING
FLOLEAN
C
2
3
4
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum or
deep cleaner may aggravate this
condition.
www.bissell.com
ug120-4002_1697E_707.indd 7
7
9/8/08 10:09:52 AM
Operation
Fill the water tank
1.
Release the handle and lay the machine
handle back to access the tank.
2.
Remove the tank from the base of the
machine by lifting the tank carry handle.
3.
Carry like a bucket to the sink. Rotate the handle
forward to unlatch the lid. Lift off and set the
lid aside.
4.
Using the measuring cup, pour BISSELL deep
cleaning formula into the mouth of the bladder.
5.
Fill up the bladder with clean hand
hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
6.
1
2
3
5
6
7
Replace the top of the tank by matching the lid
and tank edges. Handle must be in the forward
position in order to replace lid. Rotate the handle
to the carrying position to latch the lid.
Note: Remember to secure the lid and test to make
sure it is secure before picking up the tank.
7.
WARNING:
To reduce the risk of fire and
Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
electric shock due to internal
component damage, use only
BISSELL cleaning formulas
intended for use with the
deep cleaner.
Set ReadyTools dial
Set ReadyTools dial to floor cleaning.
ReadyTools Dial
Power switch
1.
Plug into a proper outlet and turn the power
switch to the ON ( I ) position. The switch is
found on the back of the handle.
Power Switch
1
ON
OFF
LS
TOO
OR ING
FLOLEAN
C
8
www.bissell.com
ug120-4002_1697E_707.indd 8
9/8/08 10:09:59 AM
Operation
Cleaning strokes
1. While pressing the spray trigger, make one
slow forward wet pass and another one
back. Let the BISSELL deep cleaning formula
do the work for you.
Caution: Do not overwet.
2.
Release the spray trigger, and make one slow
forward and backward pass over the same area
to remove any residual dirty water, and aid in
drying. Repeat cleaning passes until solution
being pulled up appears clean. Continue passes
without pressing the spray trigger until you can’t
see any more water being pulled up.
Tip:
Deep cleaning stairs and heavy traffic areas
on a regular basis can prolong carpet life.
Empty the water tank
1.
Remove the water tank from the base using
the tank carry handle. Carry the tank like a
bucket to a utility sink or outside where you
will dispose of the collection water. Remove
the top of the tank by rotating the handle
forward to unlatch lid and lifting lid off tank.
2.
Empty collection water from bottom of tank.
NOTE: You may notice hair & debris
deposits on the carpet or in the tank that
were loosened by the cleaning action
(especially with newer carpets that have
never been deep cleaned before). This debris
should be picked up and thrown away.
3.
After each use, remove and rinse the lint
screen located on the tank lid.
4.
Refill the water tank by referencing “Fill the
water tank” on page 8. Remember to secure
the top of the tank by rotating the handle
and test to make sure it is secure before
picking up.
5.
Return water tank to the machine.
www.bissell.com
ug120-4002_1697E_707.indd 9
1
2
3
4
5
9
9/8/08 10:10:00 AM
Operation
Cleaning with attachments
Your PowerWash Pro comes equipped with a hose
and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags for cleaning
instructions.
A. Check manufacturer’s tag before
cleaning. “W” or “WS” on the tag
means you can use your PowerWash
Pro. If the tag is coded with an “X” or
an “S” (with a diagonal stripe through
it), or says “Dry Clean Only”, do not
proceed with any deep cleaning
machine. Do not use on velvet, silk,
100% cotton upholstery, vinyl or
leather. If manufacturer’s tag is
missing or not coded, check with your
furniture dealer or manufacturer.
B. Check for colourfastness in an
inconspicuous place.
C. If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery time
to dry.
E. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum with
a brush attachment and a crevice tool
to clean in fabric folds.
2.
Follow the instructions on page 8 for filling
the water tank.
3.
Set ReadyTools dial to the tools setting. This
will allow spray and divert the suction to the
hose.
Attach the cleaning tool to the end of the
hose.
4.
5.
10
Manufacturer’s tag
W
ARNING:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
Plug in and turn on the power switch.
www.bissell.com
ug120-4002_1697E_707.indd 10
9/8/08 10:10:01 AM
Operation
Cleaning with attachments (continued)
7.
When cleaning is complete, remove and
rinse tools in clean, running water.
8.
Coil hose around the tool caddy.
9.
Empty water tank and rinse out, following
the instructions on page 9.
10. Return ReadyTools dial to floor cleaning.
Cleaning fluid section
Keep plenty of genuine BISSELL deep cleaning
formulas on hand so you can clean and protect
whenever it fits your schedule. Always use
genuine BISSELL deep cleaning formulas.
1.42 L
Fiber Cleansing
Formula™ with
Scotchgard™
protector
item # 710E
1.42 L
Multi-Allergen
Removal™ Formula
with Scotchgard™
protector
item # 720E
1.42 L
Pet Odor and Soil
Removal™ Formula
with Scotchgard™
protector
item # 730E
W
ARNING:
To reduce the risk of
fire and electric
shock due to internal
component damage,
use only BISSELL deep
cleaning formula
intended for use with
the deep cleaner.
Non-BISSELL cleaning
formula may harm the
machine and void the
warranty.
1.42 L
Natural Orange
Extract Formula™ with
Scotchgard™ protector
item # 740E
1.42 L
Lavender Essence
Formula™ with
Scotchgard™ protector
item # 750E
Stain removal
Do Not Delay! Attending to an accident soon
after it occurs ensures the chances for full
removal. Leaving it for an extended period of
time may cause it to set and become permanent.
1. Blot up liquids with an absorbent cloth or paper
towels. White materials are recommended
because certain dyes may bleed and make the
stain worse.
2.
Gently scrape up any semi-solids with a
spoon or spatula. Do not use a knife or other
utensil with sharp edges because it could
damage the carpet or upholstery.
3.
If the area has dried, remove the remaining
semi-solids and residue with a sweeper
or vacuum.
www.bissell.com
ug120-4002_1697E_707.indd 11
11
9/8/08 10:10:15 AM
Operation
Stain removal (continued)
4.
Use your BISSELL deep cleaner as a precleaner.
With one of the tools attached to the flex hose,
set the ReadyTools dial to tools. Spray the
area with cleaning solution and allow the
BISSELL deep cleaning formula to penetrate for 3-5
minutes.
5.
Once the precleaning is complete, use the
attached tool to gently scrub the stain with
back and forth strokes.
6.
Allow to dry. Some difficult stains may require
a second treatment.
Maintenance and care
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF ( 0 ). Unplug the
machine and wrap the power cord.
2.
After emptying the water tank, rinse it out at a
faucet with running hand hot tap water, taking
care to clean underneath the heavy duty bladder,
and all around it. Clean out lint screen.
3.
Replace the water tank on the machine.
4.
Wipe the machine’s exterior with a soft cloth.
5.
After carpet is dry, vacuum again to remove
hair and fuzz.
W
ARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Machine storage
Once your cleaning is complete, make sure the
water tank is emptied and rinsed out. Put the unit
away in a closet or basement for the next use.
Note: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components
and void the warranty.
12
www.bissell.com
ug120-4002_1697E_707.indd 12
9/8/08 10:10:16 AM
Troubleshooting
W
ARNING:
To reduce the risk of
fire, electric shock or
injury, unplug from the
outlet before servicing.
Reduced spray or no spray.
Possible Cause
Remedies
1. Bladder may be empty.
1. Refill bladder with hand hot tap water.
2. The lint screen may be clogged
2. Clean out lint screen.
3. Tanks may not be seated properly.
3. Turn power OFF ( 0 ); remove &
reseat tanks.
4. Pump may have lost prime.
4. Turn power OFF ( 0 ); after 1
minute turn ON and press spray trigger.
5. The pump belt may be broken.
5. Turn power Switch OFF ( 0 ) and unplug
from the outlet. To check if a pump
belt has broken, you will need a flat
head screwdriver. Insert the blade end
into the lower slot of the belt access
door to release the lower snap. If
necessary, insert the balde end into the
upper slot to release the upper
snap. Examine the belt for breakage.
You should be able to see the pump
Lift Here
belt looped around the motor shaft. If it
is broken or missing, please refer to
Insert
Replacement Parts on page 15 before
Screwdriver
calling BISSELL Consumer Services.
Blade Here
Complete installation instructions
will accompany the replacement belt.
Cleaner not picking up solution.
Possible Causes
Remedies
1. ReadyTools dial may be on the
1. Set ReadyTools dial to either floor
wrong setting for the cleaning job. cleaning or tools.
2. Nozzle window may not be 2. Press down firmly on the black
properly attached. oval gasket at the top window to
make sure the two tabs on the
back of the nozzle window are
snapped into the mating slots in
the main housing.
3. Tank-in-tank lid is not properly installed.
3. Re-install lid; refer to page 8.
4. Tank-in-tank is not properly seated.
4. Tank-in-tank must be firmly
seated to function; remove and
reseat tank-in-tank.
5. Poor tool position. 5. Adjust angle; apply more
(Hand held attachments only). downward pressure.
6. Tank-in-tank has picked up 6. Empty tank-in-tank, refer to
maximum dirty water. page 9.
www.bissell.com
ug120-4002_1697E_707.indd 13
13
9/8/08 10:10:16 AM
Troubleshooting
Other maintenance or service not included above should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
BISSELL Consumer Services
If your BISSELL product should require service:
In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give
you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local
in country distributor for questions, service, or repair.
If you have questions about your warranty or need replacement parts please contact the numbers below.
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday 9 am — 4 pm
BISSELL Homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
For Australian inquiries:
Monday - Friday 9 am — 5 pm
BISSELL Australia PTY LIMITED
Unit 35
15 Ricketts Road
Mount Waverley, Victoria 3149
Australia
Telephone: 1-800-811-183
For New Zealand inquiries:
Monday - Friday 9 am — 5 pm
Parex Industries Ltd.
103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735
For all other inquiries:
Monday - Friday 8 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a
warranty claim. See Warranty on page 16 for details.
Please do not return this product to the store.
14
www.bissell.com
ug120-4002_1697E_707.indd 14
9/8/08 10:10:17 AM
Replacement parts - BISSELL PowerWash Pro
Below a list of common replacement parts*. While not all of these parts may have come
with your specific machine, all are available to you for purchase, if desired.
ItemPart No.Part Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
210-9201
4” Small Area Tool
203-6655
Spraying Crevice Tool
203-6652
TurboBrush™
214-9142
PreTreat Wand
215-9155
Tough Stain Brush
015-9043
Tank Assembly Complete (Includes Lid Assembly)
015-4439
Tank Lid Assembly
015-9041
Tank Bottom
214-9871Floor Nozzle Window
210-4052
Window Gasket
215-0628
Replacement Pump Belt (With Instructions)
213-3501
Lint Screen
710E
1.42 L Fiber Cleansing Formula™ with Scotchgard™ protector
720E
1.42 L Multi-Allergen Removal™ Formula with Scotchgard™ protector
730E
1.42 L Pet Odor and Soil Removal™ Formula with Scotchgard™ protector
740E
1.42 L Natural Orange Extract Formula™ with Scotchgard™ Protector
750E
1.42 L Lavender Essence Formula™ with Scotchgard™ protector
*Not all parts are included with every model.
1
2
8
10
3
4
5
6
7
11
12
13
14
15
9
16
17
www.bissell.com
ug120-4002_1697E_707.indd 15
15
9/8/08 10:10:39 AM
Warranty - BISSELL PowerWash Pro
This warranty gives you specific legal rights, and you may also have other rights which may vary from country
to country. If you need additional instruction regarding this warranty or have questions regarding what it may
cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or
contact your local in country distributor.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc., will replace (with
new or remanufactured components), at BISSELL’s option, free of charge from the date of purchase by the
original purchaser, for one year any defective or malfunctioning part do to manufacturers defect.
This warranty applies to product used for personal, and not commercial or rental service. This warranty does
not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction
caused by negligence, abuse, or use not in accordance with the User’s Guide is not covered.
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday 9 am — 4 pm
BISSELL Homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
For Australian inquiries:
Monday - Friday 9 am — 5 pm
BISSELL Australia PTY LIMITED
Unit 35
15 Ricketts Road
Mount Waverley, Victoria 3149
Australia
Telephone: 1-800-811-183
For New Zealand inquiries:
Monday - Friday 9 am — 5 pm
Parex Industries Ltd.
103 Central Park Drive
Henderson
Auckland
New Zealand
Telephone: 0800-247-735
For all other inquiries:
Monday - Friday 8 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, MI 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT.
BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES
EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE
BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS
DESCRIBED ABOVE.
16
www.bissell.com
ug120-4002_1697E_707.indd 16
©2007 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4002
Rev 7/07
Visit our website at:
www.bissell.com
Scotchgard is a trademake of 3M
9/8/08 10:10:40 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising