Legend Valves Specifications

Legend Valves Specifications
GATE, CHECK, LOW
PRESSURE VALVES,
AND Y-STRAINERS
IT’S ALL ABOUT YOU
BRONZE SCREW-O
OVER BONNET GATE VALVES
MODEL
T-4
414
MODEL
S-4
414
LEGEND MODEL T-4
414/S-4
414 gate valves are constructed of heavy duty bronze. They have a screw-over
bonnet, non-rising stem, solid wedge disc and integral
seats. The disc is fully guided on both sides for precise
alignment. Recommended for commercial and industrial
use on steam, water, oil or gas. May be repacked while
in service under pressure.
DIMENSIONS IN INCHES
C
VALVE
SIZE
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRONZE
BONNET
BRONZE
STEM
BRASS
PACKING NUT
BRASS
DISC
BRONZE
HAND WHEEL
CAST IRON
WHEEL NUT
BRASS
LOCK NUT
BRASS
GLAND
BRASS
PACKING
TEFLON*
PRESSURE RATING
200 W.O.G. NON-SHOCK
125 W.S.P.
I.P.S. AND
CxC
B
A
(I.PS.)
(CxC)
A
B
C
A
1/2
"
1.71
1.81
3.35
2.05
3/4
"
1.89
2.33
3.63
2.21
1"
2.13
2.68
4.33
2.36
11/4 "
2.33
2.99
4.93
2.80
11/2 "
2.52
3.31
5.40
2.80
2"
2.84
3.82
6.38
3.19
*DUPONT REG T.M.
BRONZE INSERTED BONNET GATE VALVES
MODEL
T-4
415
MODEL
S-4
415
ISO-9
9002
I.P.S. AND CxC
LEGEND MODELS T-4
415/S-4
415 bronze gate valves have
a screwed bonnet, non-rising stem, solid wedge disc, and
integral seats. The body, bonnet, and disc are
manufactured from heavy duty bronze. The aluminum hand
wheel has an easy grip configuration. Each valve is tested
twice: air under water, in the open and closed position.
Recommended for commercial and industrial use on
steam, water, oil or gas. May be repacked while in service
under pressure.
DIMENSIONS IN INCHES
VALVE
SIZE
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRONZE
BONNET
BRONZE
STEM
BRASS
DISC
BRONZE
PRESSURE RATING
200 W.O.G. NON-SHOCK
125 W.S.P.
C
PACKING NUT
BRASS
HAND WHEEL
ALUMINUM
WHEEL NUT
BRASS
LOCK NUT
BRASS
GLAND
BRASS
GLAND PACKING
GRAPHITE/TEFLON
"
1.58
"
1/2 "
3/4 "
1.61
1.69
1.85
2.13
2.40
2.44
2.54
3.51
3.98
4.57
1/4
3/8
B
A
A
(I.PS.)
1"
11/4 "
11/2 "
2"
21/2 "
3"
4"
(CxC)
A
B
C
1.77
2.33
2.76
2.88
3.19
3.90
4.53
5.18
5.91
3.03
3.03
2.84
3.31
3.86
4.57
4.93
6.03
7.33
8.57
10.17
2.38
2.38
2.38
2.80
2.94
3.38
3.75
4.13
4.75
6.13
6.13
BRASS GATE VALVES
MODEL
T-4
401
MODEL
S-4
401
ISO-9
9002
I.P.S. AND CxC
LEGEND MODELS T-4
401/S-4
401 gate valves are
constructed of heavy duty cast brass. Body and bonnet are
connected with a tight metal to metal leakproof seat. The
T401/S-401 have a screwed bonnet, non-rising stem, solid
wedge disc, and integral seats. Recommended for nonsteam use in residential and commercial applications. May
be repacked while in service under pressure.
The T-401/S-401 is the finest valve in its class on the
market.
DIMENSIONS IN INCHES
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRASS
BONNET
BRASS
STEM
BRASS
PACKING NUT
BRASS
DISC
BRASS
HAND WHEEL
CAST IRON
WHEEL NUT
BRASS
LOCK NUT
BRASS
GLAND
BRASS
PACKING
ASBESTOS FREE
GRAPHITE
C
PRESSURE RATING
200 W.O.G.
NON-SHOCK to 200 F
1.62
"
"
3/4 "
1.62
1.69
1.85
2.13
2.40
2.44
2.84
3.51
3.98
4.57
3/8
1/2
B
1"
11/4 "
11/2 "
A
MODEL
S-4
400
A
(I.PS.)
"
1/4
BRASS GATE VALVES
MODEL
T-4
400
VALVE
SIZE
2"
21/2 "
3"
4"
A
(CxC)
1.77
2.33
2.76
2.88
3.19
3.90
4.53
5.18
COMPACT PATTERN
I.P.S. AND CxC
B
C
3.27
3.29
3.52
4.02
4.57
5.38
6.03
7.50
9.25
10.75
12.60
2.13
2.13
2.13
2.13
2.40
2.96
2.96
3.19
4.14
4.45
5.20
ISO-9
9002
LEGEND MODELS T-4
400/S-4
400 gate valves are
constructed of cast brass. Body and bonnet are connected
with a tight metal to metal leakproof seat. They have a
screwed bonnet, non-rising stem, solid wedge disc and
integral seats. Recommended for non-steam use in
residential and commercial applications. They are an
excellent competitive alternative where port size is not
critical.
DIMENSIONS IN INCHES
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRASS
BONNET
BRASS
STEM
BRASS
PACKING NUT
BRASS
DISC
BRASS
HAND WHEEL
CAST IRON
WHEEL NUT
BRASS
LOCK NUT
BRASS
GLAND
BRASS
PACKING
ASBESTOS FREE
GRAPHITE
C
PRESSURE RATING
200 W.O.G.
NON-SHOCK to 200 F
VALVE
SIZE
1/2
3/4
"
"
1"
11/4 "
11/2 "
B
A
2"
21/2 "
3"
4"
(I.PS.)
(CxC)
A
B
C
1.54
1.73
1.85
2.09
2.25
2.40
2.80
3.43
3.96
1.62
2.13
2.48
2.64
2.96
3.51
2.72
2.92
3.31
3.86
4.57
4.93
6.03
7.33
8.67
2.13
2.13
2.13
2.40
2.96
2.96
3.19
4.14
4.41
A
BRASS GATE VALVES
MODEL
S-4
408
MODEL
T-4
408
CAST BRASS
ECONOMY VERSION
I.P.S. AND CXC
LEGEND MODELS T-4
408/S-4
408 gate valves are
constructed of heavy duty cast brass. Body and bonnet are
connected with a tight metal to metal leakproof seat. They
have a screwed bonnet, non-rising stem, solid wedge disc,
and integral seats. Recommended for non-steam use in
residential applications. The T-408/S-408 is Legend s
newest entry into the competitive gate valve market.
DIMENSIONS IN INCHES
C
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRASS
BONNET
BRASS
STEM
BRASS
PACKING NUT
BRASS
DISC
BRASS
HAND WHEEL
CAST IRON
WHEEL NUT
BRASS
LOCK NUT
BRASS
GLAND
BRASS
PACKING
ASBESTOS FREE
GRAPHITE
PRESSURE RATING
200 W.O.G.
NON-SHOCK to 200 F
B
A
COMPRESSION END GATE VALVE
VALVE
SIZE
1/2
"
3/4
"
1"
11/4 "
11/2 "
2"
21/2 "
3"
4"
(I.PS.)
(CxC)
A
B
C
1.71
1.81
2.13
2.24
2.44
2.68
3.70
4.02
4.53
1.69
2.33
2.72
2.94
3.29
3.98
2.92
3.31
3.90
4.61
5.08
5.99
6.90
8.47
9.89
2.01
2.21
2.56
2.76
3.11
3.70
4.02
5.00
5.00
A
CAST BRASS
LEGEND MODEL T-4
402 gate valves are the same
construction as the T-401/S-401 but with labor saving
compression ends. They have a screwed bonnet, nonrising stem, solid wedge disc, and integral seats.
Recommended for non-steam use in residential and
light commercial applications. May be repacked while in
service under pressure.
MODEL
T-4
402
Excellent for use as a repair valve.
C
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRASS
BONNET
BRASS
STEM
BRASS
PACKING NUT
BRASS
DISC
BRASS
HAND WHEEL
CAST IRON
GLAND
BRASS
PACKING
ASBESTOS FREE
GRAPHITE
COMPRESSION RING
BRASS TUBE
NUT
BRASS
DIMENSIONS IN INCHES
PRESSURE RATING
200 W.O.G.
NON-SHOCK to 200 F
VALVE
SIZE
B
A
A
B
C
1/2
"
2.52
3.39
2.13
3/4
"
2.76
4.00
2.13
1"
3.15
4.45
2.40
DRAINABLE GATE VALVE
MODEL
T-4
403
MODEL
S-4
403
CAST BRASS
I.P.S. AND CxC
LEGEND MODEL T-4
403/S-4
403 gate valves are the
same construction as the T-401/S-401 but with a drain
cap which allows the line to be drained to prevent
freeze up. They have a screwed bonnet, non-rising
stem, solid wedge disc, and integral seats.
Recommended for non-steam use in residential and
light commercial applications. May be repacked while in
service under pressure.
C
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRASS
BONNET
BRASS
STEM
BRASS
PACKING NUT
BRASS
DISC
BRASS
HAND WHEEL
CAST IRON
GLAND
BRASS
PACKING
ASBESTOS FREE
GRAPHITE
DRAIN CAP
BRASS
DRAIN PACKING
NYLON
DIMENSIONS IN INCHES
PRESSURE RATING
200 W.O.G.
NON-SHOCK to 200 F
VALVE
SIZE
B
MODEL
T-4
404
BODY
CAST BRONZE
BONNET
CAST BRONZE
STEM
BRASS
PACKING NUT
BRASS
DISC
BRONZE
HAND WHEEL
CAST IRON
GLAND NUT
BRASS
PACKING
TEFLON*
CPVC WASHERS
NBR (BUNA-N)
END NUTS
BRASS
*DUPONT REG T.M.
A
B
C
1/2
"
1.69
1.77
3.42
2.13
3/4
"
1.85
2.33
3.85
2.13
1"
2.21
2.84
4.64
2.40
CAST BRONZE
LEGEND MODEL T-4
404 gate valves are constructed of
heavy duty bronze. Body and bonnet are connected
with a tight metal to metal leakproof seat. They come
equipped with CPVC transition fittings for connection to
CPVC copper tube size pipe. They have a screwed
bonnet non-rising stem, solid wedge disc and integral
seat. Recommended for residential application.
MATERIAL SPECIFICATION
MATERIAL
(CxC)
A
A
CPVC CONNECTION GATE VALVE
PART
(I.P.S.)
C
PRESSURE RATING
200 W.O.G.
NON-SHOCK TO 210 F
DIMENSIONS IN INCHES
VALVE
SIZE
A
B
C
1/2
"
5.12
3.35
1.97
3/4
"
5.51
3.74
2.20
B
A
BRONZE GLOBE VALVE
I.P.S.
LEGEND MODEL T-4
421 bronze globe valves have a
screwed bonnet, rising stem, integral seat and swivel
disc for accurate throttling and flow control. The body
and bonnet are constructed of heavy duty bronze.
Recommended for heavy industrial use when the valve
is to be operated frequently
MODEL
T-4
421
DIMENSIONS IN INCHES
C
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRONZE
BONNET
BRONZE
STEM
FORGED BRASS
PACKING NUT
BRASS
DISC
BRASS
HAND WHEEL
ALUMINUM
WHEEL NUT
BRASS
GLAND
BRASS
GLAND PACKING
GRAPHITE/TEFLON*
VALVE
SIZE
PRESSURE RATING
200 W.O.G. NON-SHOCK
125 W.S.P.
(I.PS.)
A
B
C
1/2
"
1.96
2.81
1.97
3/4
"
2.18
3.27
2.21
1"
2.56
3.90
2.36
11/4 "
2.92
4.30
3.23
1/2
1 "
3.29
4.94
3.34
2"
3.90
5.95
3.94
B
A
*DUPONT REG T.M.
BRASS SWING CHECK VALVE
MODEL
S-4
451
I.P.S. AND CxC
LEGEND MODELS T-4
451/S-4
451 check valves are
constructed of heavy duty brass. They have a screwed
cap, swing type disc and integral seat. They prevent
backflow while offering full flow performance with a
minimum of turbulence or pressure loss.
Recommended for residential and commercial
applications.
DIMENSIONS IN INCHES
VALVE
SIZE
MODEL
T-4
451
B
MATERIAL SPECIFICATION
PART
MATERIAL
CAP
BRASS
BODY
BRASS
PRESSURE RATING
200 W.O.G. NON-SHOCK
A
A
(I.PS.)
A
(CxC)
B
3/8
"
2.01
1/2
"
2.01
2.44
1.34
3/4
"
2.29
3.03
1.42
1.40
1"
2.48
3.74
1.54
11/4 "
3.15
4.37
1.89
1/2
1 "
3.47
5.12
2.17
2"
3.98
5.95
2.56
1/2
2 "
5.16
6.90
2.96
7.60
3.82
DISC
BRASS
3"
5.79
HINGE PIN
BRASS
4"
6.86
SCREW
BRASS
3.94
BRONZE Y-P
PATTERN CHECK VALVE
I.P.S. AND CxC
LEGEND MODELS T-4
453/S-4
453 y-pattern check valves
are constructed of heavy duty bronze. They have a
screwed cap, swing type disc and integral seat. The ypattern design has excellent full flow characteristics and
can be installed vertically or horizontally.
Recommended for preventing backflow in commercial
and industrial applications.
MODEL
T-4
453
DIMENSIONS IN INCHES
MODEL
S-4
453
VALVE
SIZE
B
MATERIAL SPECIFICATION
PART
MATERIAL
PRESSURE RATING
300 W.O.G. NON-SHOCK
150 W.S.P.
(I.PS.)
(CxC)
A
B
A
1/2
"
2.19
2.56
1.67
3/4
"
2.76
3.44
2.01
1"
3.11
4.06
2.28
CAP
BRONZE
11/4 "
3.74
4.69
2.69
BODY
BRONZE
1/2
1 "
DISC
BRONZE
4.33
5.38
3.07
HINGE PIN
BRASS
2"
5.08
6.69
3.78
SCREW
BRASS
A
BRONZE IN-L
LINE CHECK VALVE
SPRING LOADED
I.P.S. AND CxC
LEGEND MODELS T-4
455/S-4
455 spring loaded in-line
check valves are constructed of heavy duty bronze.
They are silent type and have Buna-N discs for quick,
silent closing. They provide positive backflow
prevention and minimized water hammer. They may be
installed in any position. Recommended for preventing
backflow in commercial and industrial applications.
MODEL
T-4
455
MODEL
S-4
455
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRONZE
END ADAPTER
BRONZE
DISC
BUNA-N
DISC
HOLDER
SPRING
/ "- 11/4 "
1 2
11/2 "- 2"
FORGED BRASS
BRONZE
PHOSPHER BRONZE
DIMENSIONS IN INCHES
VALVE
SIZE
B
PRESSURE RATING
250 W.O.G.
A
(I.PS.)
(CxC)
A
B
A
1/2
"
2.09
2.40
1.22
3/4
"
2.32
2.80
1.50
1"
2.64
3.54
1.89
11/4 "
3.07
3.86
2.16
1/2
1 "
3.31
4.23
2.60
2"
3.78
5.08
3.14
BRONZE IN-L
LINE CHECK VALVE
SPRING LOADED
I.P.S.
LEGEND MODELS T-4
450 spring loaded in-line check
valves are constructed of heavy duty bronze. They are
silent type and have a NBR disc for quick, silent
closing. They provide positive backflow prevention and
minimized water hammer. They may be installed in any
position.
DIMENSIONS IN INCHES
MODEL
T-4
450
B
VALVE
SIZE
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRONZE
STOPPER
BRONZE
O-RING
NBR (Buna-N)
WASHER
NBR (Buna-N)
SPRING
STAINLESS STEEL #304
CAP
STAINLESS STEEL #304
NUT
STAINLESS STEEL #304
STEM
BRONZE
PRESSURE RATING
200 W.O.G.
200 F Maximum Service Temperature
A
CAST IRON Y-S
STRAINER
A
B
1/2
"
2.72
1.38
3/4
"
3.27
1.54
1"
3.39
1.87
1/4
1 "
3.63
2.21
11/2 "
4.02
2.50
2"
4.96
3.13
I.P.S.
LEGEND MODEL T-1
17 y-strainers are constructed of
heavy duty cast iron. They have a 20 mesh 304
stainless steel screen in sizes 1/4"-2" and a 1/16"
perforated strainer in 21/2" and 3". The cast iron retainer
cap is gasketed and tapped for a closure plug (closure
plug not furnished). Install strainers upstream to protect
valves, regulators, and meters, etc. from rust, pipe
scale and dirt. Self cleaning can be accomplished by
opening the valve or plug connected to the blow-off
outlet.
DIMENSIONS IN INCHES
MODEL
T-1
17
A
MATERIAL SPECIFICATION
MATERIAL
BODY
CAST IRON
PRESSURE RATING
500 W.O.G. NON-SHOCK
250 W.S.P.
C
PART
B
CAP
SCREEN
CAST IRON
304
STAINLESS
STEEL
VALVE
SIZE
1/4
A
B
C (NPT)
3.19
1.97
1/2
3/8
3.19
1.97
1/2
1/2
3.19
1.97
1/2
3/4
3.75
2.68
1/2
1
4.00
2.95
3/4
11/4
5.00
3.45
3/4
11/2
5.75
3.78
3/4
2
7.00
4.33
3/4
21/2
9.25
6.10
1"
3
10.00
7.40
11/4
BRONZE Y-S
STRAINER
I.P.S. AND C x C
LEGEND MODEL T-1
15 and S-1
15 y-strainers are
constructed of heavy duty bronze. They have a 20
mesh 304 stainless steel screen in sizes 1/4"-2" and a
1/16" perforated strainer in 21/2" and 3". The bronze
retainer cap is gasketed and tapped for a closure plug
(closure plug furnished). Install strainers upstream to
protect valves, regulators, and meters, etc. from rust,
pipe scale and dirt. Self cleaning can be accomplished
by opening the valve or plug connected to the blow-off
outlet.
MODEL
T-1
15
DIMENSIONS IN INCHES
MODEL
S-1
15
A
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
BRONZE
CAP
SCREEN
B
PRESSURE RATING
300 W.O.G.
150 W.S.P.
VALVE
B
A
A
B
SIZE (IPS) (CXC) (IPS) (CXC)
1/4
2.57
2.94
3/8
2.57
3.02
1/2
2.94 3.33 2.95 2.80
3/4
3.38 4.35 3.37 3.18
1
4.13 5.03 3.97 3.75
C (NPT)
1/8"
1/8"
1/4"
1/4"
3/8"
11/4
4.82
5.91
4.55
4.44
3/8"
11/2
5.38
6.88
4.94
4.82
1/2"
BRONZE
2
6.63
8.75
6.25
5.95
304
STAINLESS
STEEL
21/2
9.00
7.50
11/4"
3
10.00
8.50
11/2"
FROSTFREE SILLCOCKS
1/2"
STANDARD
AND WITH INTEGRAL VACUUM BREAKER
LEGEND MODELS T-5
551 standard frostfree sillcocks and T-5
552 frostfree sillcocks
with integral vacuum breaker are heavy chrome plated brass construction. The handle
has an easy grip configuration and is constructed of hard plastic on the 551 and cast
aluminum on the 552. The heavy brass operating worm drive provides the proper seal
of washer to seat. The notched flange allows for stable installation.
MODEL
T-5
551
MODEL T-5
552 IS ASSE CERTIFIED 1019 &
UPC MARKED IAPMO APPROVED
MODEL
T-5
552
The 1/2" size has combination 1/2" M.I.P.
and 1/2" CxC inlet connection. The 3/4" size
has combination 3/4" M.I.P. and 1/2" F.I.P.
connection.
ISO-9
9002 LOW PRESSURE VALVES
T-5
501
S-5
501
Features
Stop valve
125 W.O.G.
CxC
Brass Body
Sizes 1/2 " & 3/4 "
Features
Stop valve
125 W.O.G.
I.P.S.
Brass Body
Sizes 1/2 " & 3/4 "
T-5
503
Features
Angle Stop
125 W.O.G.
I.P.S.
Brass Body
Sizes 1/2 " & 3/4 "
Features
Stop & Waste
125 W.O.G.
Compression
ends
Brass Body
Sizes 1/2 " & 3/4 "
T-5
521
Features
Angle Stop
125 W.O.G.
CxC
Brass Body
Sizes 1/2 " & 3/4 "
S-5
541 LS
Features
Locksheild Sillcock
125 W.O.G.
SWT x G.H.T.
Brass Body
Sizes 1/2 " & 3/4 "
Features
Boiler Drain
125 W.O.G.
F.I.P. x G.H.T.
Brass Body
Sizes 1/2 " & 3/4 "
T-5
511
S-5
511
Features
Stop & Waste
125 W.O.G.
I.P.S.
Brass Body
Sizes 1/2 " & 3/4 "
T-5
541
Features
Sillcock
125 W.O.G.
F.I.P. x G.H.T.
Brass Body
Sizes 1/2 " & 3/4 "
T-5
522
Features
Boiler Drain
125 W.O.G.
M.I.P. x G.H.T.
Brass Body
Sizes 1/2 " & 3/4 "
1/2 " has
combination
1/2 " M.I.P. and 1/2 " solder inlet
connection
S-5
503
T-5
512
ISO-9
9002
Features
Stop & Waste
125 W.O.G.
CxC
Brass Body
Sizes 1/2 " & 3/4 "
T-5
541 LS
S-5
541
Features
Sillcock
125 W.O.G.
SWT x G.H.T.
Brass Body
Sizes 1/2 " & 3/4 "
T-5
537
Features
Hose bibb
200 W.O.G.
Ball valve
M.I.P. x G.H.T.
Brass body
Sizes 1/2 " & 3/4 "
1/2 " has combination 1/2 " M.I.P.
and 1/2 " solder inlet connection
Features
Locksheild
Sillcock
125 W.O.G.
F.I.P. X G.H.T.
Brass Body
Sizes 1/2 " & 3/4 "
T-5
538
Features
Bent nose
garden valve
200 W.O.G.
Ball valve
F.I.P. x G.H.T.
3/4 " Size
LOW PRESSURE VALVES
T-5
531
Features
Hose bibb
125 W.O.G.
M.I.P. x G.H.T.
Brass body
Sizes 1/2 " & 3/4 "
1/2 " has combination
1/2 " M.I.P. and 1/2 " solder
inlet connection
T-5
534
Features
Hose bibb
125 W.O.G.
No kink
F.I.P. x G.H.T.
Brass body
Sizes 1/2 " & 3/4 "
T-1
12
Features
Washing machine
valve
125 W.O.G.
Chrome plated
Compression x
G.H.T.
Brass body
Sizes 5/8 " O.D. x G.H.T.
T-5
502
Features
Stop valve
125 W.O.G.
CPVC transition
ends
Brass body
Sizes 1/2 " & 3/4 "
S-5
504
Features
Stop valve
125 W.O.G.
Long bonnet
CxC
Brass body
1/2 " Size
T-5
532
Features
Hose bibb
125 W.O.G.
Plain end
Brass body
Sizes 1/2 " & 3/4 "
1/2 " has combination
1/2 " M.I.P. and 1/2 " solder
connection
T-5
533
Features
Hose bibb
125 W.O.G.
No kink
M.I.P. x G.H.T.
Brass body
Sizes 1/2 " & 3/4 "
1/2 " has combination
1/2 " M.I.P. and 1/2 "
solder connection
S-5
535
T-5
543
Features
Hose bibb
125 W.O.G.
No kink
SWT x G.H.T.
Brass body
Size 1/2 " & 3/4 " SWT
Features
Bent nose
garden valve
125 W.O.G.
Brass body
F.I.P. x G.H.T.
Sizes 1/2 " & 3/4 " & 1"
T-5
523
T-5
501X
Features
Boiler drain
125 W.O.G.
Compression x
G.H.T.
Brass body
1/2 " Size
T-5
513
Features
Stop & waste
125 W.O.G.
CPVC transition
Brass body
Sizes 1/2 " & 3/4 "
T-5
505
Features
Angle stop
125 W.O.G.
Long bonnet
I.P.S.
Brass body
1/2 " Size
Features
Stop valve
125 W.O.G.
I.P.S.
Cross handle
Brass body
Sizes 1/2 " & 3/4 "
T-5
504
Features
Stop valve
125 W.O.G.
Long bonnet
I.P.S.
Brass body
1/2 " Size
S-5
505
Features
Angle stop
125 W.O.G.
Long bonnet
CxC
Brass body
1/2 " Size
COMMERCIAL SILLCOCKS
MODEL
T-5
545
MODEL
T-5
546
CHROME PLATED BRASS
I.P.S.
LEGEND MODELS T-5
545 and T-5
546 heavy pattern
commercial sillcocks are constructed of heavy duty
chrome plated brass. They have a screw-over bonnet,
extra large stem and packing nut. Their large wrench
flats and flange allow for easy installation. Their heavy,
high quality construction combined with their
competitive pricing make the T-545/T-546 the finest
value in their class.
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
CHROME PLATED
BRASS
PACKING NUT
BRASS ROD
DISC
STAINLESS STEEL
WASHER
EPDM
** LOCKSHEILD
BRASS
** LOOSE KEY
CAST BRASS
STEM
FORGED BRASS
HANDLE
CAST ALUMINUM
SEAT SCREWS
BRASS
BONNET
CHROME PLATED
BRASS
ASBESTOS FREE
GRAPHITE
CHROME PLATED
STEEL
STEM PACKING
HANDLE SCREW
SEAT DISC
PRESSURE RATING
125 W.O.G.
DIMENSIONS IN INCHES
VALVE
SIZE
A
B
1/2
" T-545
4.63
3.88
3/4
" T-545
4.82
3.88
1/2
" T-546
4.56
4.00
3/4
" T-546
4.75
4.00
EPDM
** APPLIES TO MODEL T-546 ONLY
COMMERCIAL SILLCOCKS
MODEL
T-5
545VB
MODEL
T-5
546VB
CHROME PLATED BRASS WITH VACUUM BREAKER
I.P.S.
LEGEND MODELS T-5
545VB and T-5
546VB commercial
sillcocks are the same construction as the T-545 and
T-546 above except they have a non-removable chrome
plated ASSE 1011 certified vacuum breaker assembled
on them. The heavy, high quality construction combined
with their competitive pricing make the T-545VB/T-546VB
the finest value in their class.
MATERIAL SPECIFICATION
PART
MATERIAL
BODY
CHROME PLATED
BRASS
PACKING NUT
BRASS ROD
DISC
STAINLESS STEEL
WASHER
EPDM
** LOCKSHEILD
BRASS
** LOOSE KEY
CAST BRASS
STEM
FORGED BRASS
HANDLE
CAST ALUMINUM
SEAT SCREWS
BRASS
BONNET
CHROME PLATED
BRASS
ASBESTOS FREE
GRAPHITE
CHROME PLATED
STEEL
STEM PACKING
HANDLE SCREW
SEAT DISC
EPDM
** APPLIES TO MODEL T-546 ONLY
PRESSURE RATING
125 W.O.G. W.S.P.
400 P.S.I.
W.O.G.
DIMENSIONS IN INCHES
VALVE
SIZE
VALVE SEAT RATING
A
B
1/2
" T-545VB
4.63
3.88
3/4
" T-545VB
4.81
3.88
1/2
" T-546VB
4.56
4.00
3/4
" T-546VB
4.75
4.00
CHROME STOPS
CHROME PLATED BRASS
I.P.S., SWEAT AND COMPRESSION
MATERIAL SPECIFICATION
PART
MATERIAL
HANDLE
ZINC
HANDLE SCREW
BRASS
PACKING NUT
BRASS
PACKING
BUNA-N
STEM
BRASS/CELCON
SEAT
BUNA-N
WASHER
STEEL
BODY
BRASS
COMP. NUT
BRASS
FERRULE
BRASS
T-581 COMP. X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
3/8 " OD x 3/8 " OD
* 5/8 " OD x 3/8 " OD
5/8 " OD x 1/2 " OD
LEGEND CHROME STOPS are made from only the finest raw materials.
The bodies are deluxe chrome plated brass bar stock. The stems are brass
for sweat stops and celcon for compression. Each stop is air tested twice: in
the open and closed positions.
ANGLE VALVES
S-581 SWEAT X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
1/2 " SWT x 3/8 " OD
1/2 " SWT x 1/2 " OD
*ALSO AVAILABLE IN POLISHED BRASS
T-581 FIP X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
3/8 " FIP x 3/8 " OD
1/2 " FIP x 3/8 " OD
1/2 " FIP x 1/2 " OD
T-581 CPVC X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes
1/2 " CPVC x 3/8 " OD
S-581ET SWEAT X COMP.
Features
110 W.O.G.
Chrome plated
brass body
5" Extension
Bell Escutcheon
Sizes:
1/2 " SWT x 3/8 " OD
T-581 BARB X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes
1/2 " BARB x 3/8 " OD
T/S-581 LS
Features
110 W.O.G.
Chrome plated
brass body
Lockshield
Sizes:
1/2 " FIP x 3/8 " OD
5/8 " OD x 3/8 " OD
1/2 " SWT x 3/8 " OD
T-583
Features
110 W.O.G.
Chrome plated
brass body
Slipjoint
Sizes:
1/2 " FIP x 1/2 " or 7/16 " OD
5/8 " OD x 1/2 " or 7/16 " OD
1/2 " SWT x 1/2 " or 7/16 " OD
CHROME STOPS
CHROME PLATED BRASS
I.P.S., SWEAT AND COMPRESSION
STRAIGHT VALVES
T-5
582 COMP. X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
3/8 " OD x 3/8 " OD
5/8 " OD x 3/8 " OD
1/2 " OD x 1/2 " OD
5/8 " OD x 1/2 " OD
S-5
582 SWEAT X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
1/2 " SWT x 3/8 " OD
1/2 " SWT x 1/2 " OD
S-5
582ET SWEAT X COMP.
Features
110 W.O.G.
Chrome plated
brass body
5" Extension
Bell Escutcheon
Sizes
1/2 " SWT x 3/8 " OD
T-5
587 COMP. X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
5/8 " OD x 3/8 " OD x 3/8 " OD
5/8 " OD x 3/8 " OD x 1/4 " OD
T-5
582 FIP X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
3/8 " FIP x 3/8 " OD
1/2 " FIP x 3/8 " OD
1/2 " FIP x 1/2 " OD
T-5
582 CPVC X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes
1/2 " CPVC x 3/8 " OD
T-5
584
Features
110 W.O.G.
Chrome plated
brass body
Slipjoint
Sizes:
1/2 " FIP x 1/2 " or 7/16 " OD
5/8 " OD x 1/2 " or 7/16 " OD
1/2 " SWT x 1/2 " or 7/16 " OD
T-5
587 FIP X COMP.
Features
110 W.O.G.
Chrome plated
brass body
Sizes:
3/8 " FIP x3/8 " OD x 3/8 " OD
1/2 " FIP x 3/8 " OD x 3/8 " OD
1/2 " FIP x 3/8 " OD x 1/2 " OD
1/2 " FIP x 3/8 " OD x 1/4 " OD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement