ADDON HP2100 User manual

ADDON HP2100 User manual
ADDON HP2100
User Manual
ADDON HP2100 User Manual
Contents
1
Introduction ........................................................................................................ 1
1.1
Product Features ................................................................................... 1
1.2
Application ............................................................................................. 1
1.3
System Requirements ........................................................................... 2
1.4
Packing List ........................................................................................... 2
2
Safety Precautions ............................................................................................. 3
3
Getting to Know the Adapter .............................................................................. 4
3.1
The Ethernet Interface........................................................................... 4
3.2
The Adapter's Buttons ........................................................................... 4
3.3
The Adapter's LEDs............................................................................... 5
How to Install the Utility............................................................................................... 7
4
How to Use the Utility....................................................................................... 10
4.1
Main Tab .............................................................................................. 10
4.2
Privacy Tab .......................................................................................... 13
4.3
Diagnostics Tab ................................................................................... 14
4.4
About Tab ............................................................................................ 16
5
Forming a HomePlug AV logical network ......................................................... 17
6
Joining a Network............................................................................................. 18
7
Leaving a Network ........................................................................................... 19
8
How to Improve the Transmission Capacity..................................................... 20
Appendix A
Specifications ................................................................................. 21
Appendix B
Acronyms and Abbreviations ......................................................... 22
i
ADDON HP2100 User Manual
1
Introduction
The ADDON HP2100 is a mini-PLC adapter. It can transmit data up to 200Mbps in
the household powerline. It can be connected to the power socket directly without
new wire. The ADDON HP2100 adapter can enter power save mode triggered by
multiple conditions. It can help you to establish a high-speed network that supports
video, voice and data without wiring and drilling. It is suitable for using in a wide
range of both residential (at home) and commercial (offices, apartments, hotels,
warehouses) network applications.
1.1
Product Features
Without new wiring, every power socket becomes a connection node in the
household.
Plug-and-play to your routers, computers and other network devices.
Provides power save mode. In the power save mode, the output
consumption of the device is less than 0.5W.
The physical data rate is up to 200Mbps.
1.2
Application
High Definition (HD) and Standard Definition (SD) video distribution
Higher data rate broadband sharing for powerline LAN
Shared broadband internet access
TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
1
ADDON HP2100 User Manual
PLC Camera
Powerline
WiFi Extender
PLC
ADSL
FTTH
PLC
PLC
Figure 1 PLC network architecture
1.3
System Requirements
Operating system: Windows 98SE, 2000, ME, XP 32/64 bit and Vista
32/64bit
CPU: Intel Pentium III or higher, clock rate faster than 2.0GHz recommended
RAM: At least 128MB
Screen resolution: Any resolution
Free disk space: At least 20MB
Network interface: At least one Fast Ethernet (100 Mbps) network card, and
a Ethernet Cord
1.4
Packing List
ADDON HP2100 x 2
CD ROM x 1
RJ45 Ethernet cable x 2
2
ADDON HP2100 User Manual
2
Safety Precautions
This device is intended for connection to the AC powerline. For installation
instructions, please refer to the installation section of this guide. The following
precautions should be taken when using this product.
Read all instructions before installing and operating this product.
Follow all warnings and instructions marked on the product.
Unplug the device from the wall outlet before cleaning. Use a damp cloth for
cleaning. Do not use liquid cleaners or aerosol cleaners.
Do not operate this product near water.
Keep the device away from a radiator or heat register.
Do not use an extension cord between the device and the AC power source.
Only a qualified technician should service this product. Opening or removing
covers may result in exposure to dangerous voltage points or other risks.
Do not plug the device into a power strip or surge protector because these
devices may consist of filter and impair signal.
Avoid plugging the device right next to noisy sources such as cell phone
charger, Halogen light, noisy desktop computer, vacuum cleaner, etc. These
cases result in poor transmission speed.
Unplug the device from the wall outlet and refer the product to qualified
service personnel for the following conditions:
–
If liquid has been spilled into the product
–
If the device has been exposed to rain or water
–
If the device does not operate normally when the operating instructions
–
If the device exhibits a distinct change in performance
are followed
3
ADDON HP2100 User Manual
3
Getting to Know the Adapter
3.1
The Ethernet Interface
Ethernet: Ethernet port. Connect one end of an Ethernet network cable to PLC’s
Ethernet port and the other end to your computer or other Ethernet-enabled
network device.
3.2
The Adapter's Buttons
Figure 2 Side panel of the device
Security\Reset: Set the status of the device members or restore the factory default
settings.
Pressing and holding the Security\Reset button for less than 3 seconds
makes the adapter a member of the existing AVLN. Pressing and holding the
Button for between 5 and 8 seconds makes the adapter getting a random
NMK. Pressing and holding the Button for between 10 seconds and 15
seconds makes the adapter restore the factory default settings. For more
details, see chapter 5 .
4
ADDON HP2100 User Manual
3.3
The Adapter's LEDs
The adapter's LEDs are located on the front panel. There are 3 LEDs to indicate
the adapter’s status.
Figure 3 Top view
The following table describes the LEDs on the device.
LED
Color
Behavior
Green
On
Green
Blink
Description
System runs normally.
System is resetting.
System is in the process
(Power)
of password
synchronization.
-
Off
Green
On
The PLC adapter is powered
off.
Ethernet connection has
established.
Blink
(Ethernet)
The device is receiving or
transmitting data via the
Ethernet interface.
-
Off
No Ethernet connection.
Green/Orange/Red
On
The device has connected to
the power line network. The
5
ADDON HP2100 User Manual
LED
Color
Behavior
Description
Data LED color will vary with
(Data)
the physical rate.
Green: Link Rate > 40
Mbps
Orange: 20 Mbps< Link
Rate <40 Mbps
Red: Link Rate< 20
Mbps
-
Off
The adapter has not found
any other compatible
powerline devices that use
the same encryption key.
6
ADDON HP2100 User Manual
How to Install the Utility
Note:
Before installing the PLC utility software, make sure that there is no any other
powerline utility installed on your computer. If there is another utility installed,
please uninstall it and restart your computer.
Follow the steps below to install the utility. No password or CD-Key is needed.
Step 1
Please insert the utility CD into the computer’s CD-ROM drive. Select
the ADDON HP2100 Utility Installation folder and then double-click the
setup.exe. The page for installing the utility software is displayed.
Figure 4 Open the setup wizard
Step 2
Click Next to display the following page.
7
ADDON HP2100 User Manual
Figure 5 Select the folder
Step 3
Click Browse… to select the installation folder, and then click Next to
continue.
Figure 6 Confirm installation
8
ADDON HP2100 User Manual
Step 4
Click Next to display the following page.
Figure 7 Complete the installation
Step 5
Click Close to finish the installation.
9
ADDON HP2100 User Manual
4
How to Use the Utility
Click the desktop icon below to enter the configuration page.
Figure 8 Desktop icon
4.1
Main Tab
The Main screen provides a list of all powerline devices logically connected to the
computer when the utility is running.
The top panel shows the local HomePlugAV devices connected to the network
interface card (NIC) of the computer. Click Connect. The utility automatically scans
the powerline periodically for other HomePlugAV devices connected to it. If no local
HomePlugAV device is discovered, the status bar displays HomePlug Adapter
NOT DETECTED.
Figure 9 Main tab
10
ADDON HP2100 User Manual
The lower panel displays all the HomePlugAV remote devices, which are
discovered in the current logical network. The total number of remote devices
connected in the same network is displayed above the remote device panel.
Network type (Public or Private) depends on the network status of the local
device. Autoscan shows whether the autoscan function is on. The following
information is displayed for all the devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To change
the name, click Rename, or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it. The
steps for setting the password of the device (required when creating a private
network) are as follows:
Step 1
Step 2
Click the device name to select the device in the lower panel.
Click Enter Password. A dialog box appears, showing the device name
and password. See Figure 5.
Figure 5 Set the device password
11
ADDON HP2100 User Manual
Step 3
Enter the password. Click OK to verify the password. The password is
case-sensitive.
A confirmation box appears if the password is entered correctly. If a device is not
found, a message appears, providing suggestions to solve the common problems.
This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by entering the
device password of the device. A dialog box appears. See Figure 6. You can enter
a device name and the password.
If the device is found and the password is entered correctly, a confirmation box
appears. If a device is not found, a message appears, providing suggestions to
solve the common problems.
Figure 6 Add the remote device
Note:
The device must be in the powerline (plugged in), so that you can confirm the
password and add the device to the network. If the device is not located, a
warning message appears.
12
ADDON HP2100 User Manual
Scan
This button is used to perform an immediate search for HomePlugAV devices
connected to the powerline network. By default, the utility automatically scans
every a few seconds and updates the displayed information.
4.2
Privacy Tab
In the Privacy screen, you can maintain security for the logical network and select
the device included in the network. See Figure 7.
Figure 7 Privacy tab
All HomePlugAV devices are loaded using a default logical network (network
name), which is normally “HomePlugAV”. In the Privacy screen, you can modify
a private network by changing the network names.
You can always reset to the HomePlugAV network (Public) by entering
“HomePlugAV” as the network name or by clicking on the Use Default button.
Note:
If the network name changes to anything other than HomePlugAV, the network
type in the main screen is displayed as Private.
13
ADDON HP2100 User Manual
Set Local Device Only
This button is used to change the network name of the local device. If a new
network name is entered, all the devices appeared in the main panel prior to this
are no longer present in the new network, effectively making the local devices not
to communicate to the devices which are in the old logical network. Click Set Local
Device Only, the devices previously set up with the same logical network (same
network name) appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear in the
main panel. If these devices whose passwords have been entered for the same
logical network, a dialog box appears, indicating the success of this operation. For
the devices whose passwords are not entered, this operation will fail and it will
report a failure message.
4.3
Diagnostics Tab
The Diagnostics screen shows the system information and history of all remote
devices appeared over a period of time. See Figure 7.
The Upper panel shows technical data concerning software and hardware on the
host computer that are used to communicate through HomePlug on the powerline
network. It includes the following:
Operating system platform/version
Host network name
User name
MAC address of all NICs (Network interface card) connected to the host
Identify versions of all driver DLLs and libraries used (NDIS) and optionally
HomePlug chipset manufacturer name (Turbo Only devices)
Firmware version
MAC addresses of all devices connected locally to the host
Version of the configuration utility
Vendor name
14
ADDON HP2100 User Manual
Figure 8 Diagnostics tab
The Lower panel displays the history of all remote devices appeared on the
computer over a certain period of time. All the devices and the parameters of the
devices on the powerline network are listed. Devices that are active on the current
logical network show a transfer rate in the rate column. Devices on other networks,
or devices that no longer exist are shown with a “?” in the rate column. The
following remote device information is available from the diagnostics screen:
Device alias name
MAC address
Password
Device last known rate
Device last known network name
HomePlug chipset manufacturer name
Date device last seen on the network
Firmware version
The diagnostics information displayed can be saved to a text file for later use, or be
printed for reference for a technical support call. Click Delete to delete the devices
which are no longer part of the network. A dialog window pops up with a
confirmation message if the user wants to delete a device whose password has
been entered.
15
ADDON HP2100 User Manual
4.4
About Tab
The About screen shows the software version and provides an html link to a
website, such as http://www.qua.qualcomm.com. Clicking the web address, you
can visit the website.
Figure 9 About tab
Preferences
The lower panel displays options for turning the autoscan function on or off.
16
ADDON HP2100 User Manual
5
Forming a HomePlug AV logical network
This chapter describes how to form a HomePlug AV logical network (AVLN) using
the Security/Reset pushbutton.
Operation progress and results can be monitored by observing the behavior of the
Power and Data indicators.
Scenario:
Devices A and B with different NMK values are connected to the same powerline.
Users want to use them to form a logical network.
Figure 10 Forming a HomePlug AV logical network
Do as follows to form a logical network using the Security/Reset button:
Step 1
Press the Security\Reset pushbutton on device A or B for 5 to 8
seconds. The device will reset and restart with a random NMK
Step 2
Step 3
Press the Security\Reset button on device A for less than 3 seconds.
Within 2 minutes, press the Security\Reset button on device B for less
than 3 seconds.
Step 4
Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval until the
operation succeeds or fails. If the connection succeeds, the Power indicators on
both devices illuminate steadily, and Data indicators on both devices also
illuminate steadily. If the connection fails, the Power indicators on both devices
keep steady on, but the Data indicators on both devices are off. In that case, repeat
steps 1-4.
17
ADDON HP2100 User Manual
6
Joining a Network
This chapter describes how to add a device to an existing HomePlug AV logical
network (AVLN) using the Security/Reset pushbutton.
Operation progress and results can be monitored by observing the behavior of the
Power and Data indicators.
Scenario:
Devices A and B are located in Network N. Users want to add device C (the joiner)
into Network N. Any devices on Network N can become the ‘adder’.
Figure 11 Join a network
Do as follows to add device C to Network N using the Security/Reset button:
Step 1
Press the Security\Reset pushbutton on the “Joiner” for 5 to 8 seconds.
The device will reset and restart with a random NMK
Step 2
Press the Security\Reset button on device C (the ‘joiner’) for less than 3
seconds, making it the ‘adder’.
Step 3
Within 2 minutes, press the Security\Reset button device A (or device B)
for less than 3 seconds.
Step 4
Wait for connection to complete.
The Power indicator on device A (or device B) and device C will flash at 1 second
intervals until the process succeeds or fails. If the connection succeeds, the Power
indicators on both devices illuminate steadily, and Data indicators on both devices
also illuminate steadily. If the connection fails, the Power indicators on both
devices keep steady on, but the Data indicators on both devices are off. In that
case, repeat steps 1-4.
18
ADDON HP2100 User Manual
7
Leaving a Network
This chapter describes how to remove a device from an existing HomePlug AV
logical network (AVLN) using the Security/Reset pushbutton.
Operation progress and results can be monitored by observing the behavior of the
Power and Data indicators.
Scenario:
Device C is located in a network. Users want to remove device C (the ‘leaver’) from
its network.
Figure 12 Remove a device from a network
Do as follows to remove device C from Network N using the Security/Reset button:
Step 1
Press the Security\Reset pushbutton on device C (the ‘leaver’) for 5 to 8
seconds. Device C resets and restarts with a random NMK.
Step 2
Wait for the reset to complete.
The Power indicator on device C momentarily extinguishes during reset, blinks
during restart, and then illuminates steadily.
After device C is removed from its existing network, users can disconnect the
device from the medium or join it to another logical network on the same medium.
19
ADDON HP2100 User Manual
8
How to Improve the Transmission Capacity
It is important to use the PLC product complying with the following "correct rules",
because it can significantly improve the transmission capacity of the network.
For the PLC device without a female socket, it is recommended to plug the device
directly into a wall socket instead of a power strip.
×
√
Figure 13 Connecting the PLC device without the female socket
20
ADDON HP2100 User Manual
Appendix A
Specifications
Chipset
QCA6410
Protocol
HomePlug AV, IEEE1901
Co-exists with existing HomePlug 1.0
System Support
Windows 98SE, 2000, ME, XP 32/64 bit and Vista
32/64bit
PLC PHY Rate
200Mbps (Max)
Modulation Band
2~30MHz
Modulation Schemes
Supports OFDM 4096/1024/256/64/16/8-QAM, QPSK,
BPSK and ROBO
Encryption
128 AES
LED’s
Power, Ethernet, Data
Push Button
Reset: Restore the factory default settings
Security: Set the network password automatically or
get a random NMK
Consumption
1.6W
Operating
0ºC to 40ºC
Temperature
Storage Temperature
-20ºC to 70ºC
Operating Humidity
10% to 90%, non-condensing
Storage Humidity
5% to 95%, non-condensing
Input Rating
100-240 VAC, 50/60Hz
Certifications
CE, UL, FCC Part 15 Class B
Green Standard
RoHS
Physical Dimension
L×W×H: 69mm×58mm×31mm
Weight
75g
21
ADDON HP2100 User Manual
Appendix B
AVLN
Acronyms and Abbreviations
AV In-home Logical Network, the AVLAN is the set of STAs
that possess the same network membership key. Every AVLN
is managed by a single CCo.
CCo
Central Coordinator
CSMA/CA
Carrier Sense Multiple Access / Collision Avoidance
DAK
Device Access Key
DM
Device Manager
IGMP
Internet Group Management Protocol
NEK
Network Encryption Key
NID
Network ID (Identification)
NMK
Network Membership Key
PLC
Powerline Communication
PIB
Parameter Information Block
STA
Station, a STA in the network with a connection to the
powerline and being able to source or sink traffic
TDMA
Time Division Multiple Access
TEI
Terminal Equipment Identifier
TOS
Type Of Service
VLAN
Virtual Local Area Network
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement