Certificate of Conformance: DTS_DTC_LP_8Inch_MOS139

Certificate of Conformance: DTS_DTC_LP_8Inch_MOS139
AVS.4.14.14007/CC-12
Issuing Center: ANTW ERP
Page 1/2
VERITAS
CERTIFICATE OF CONFORMITY
To ICAO Annex 14 - Sixth Edition - July 20 13
(Standards and recommended practices )
To ICAO Aerodrome Desig n Manual - Part 4
To IEC TS 61827
The undersigned, Rudi Vandenbempt, acting with in the scope of the General Conditions of
BUREAU VERITAS, certifies herewith the supply of
Products: AD LP' Lights type DTS/DTC for straight/curved
sections - 1/4" protrus ion
Green LED according to Manual of Standards Part 139 Aerodromes - Australia
Manufactured by ADB Zaventem
Applications: LED Taxiway Centre Line High Intensity Bi/Uni-directionallnset
lights and Runway turn pad lights
has been inspected and found in conform ity with the applicable
specifications/requirements of:
• the catalogue sheet DOCA04520EV4
• the ICAO Annex 14 - Volume I - §5.3. 17 & 5.3. 19 for light output
• the IEC TS 61827 "Electrical installations for lighting and beaconing of
aerodromes- Characteristics of inset and elevated lum inaires used on
aerodromes and heliports"
• the Manual of Standards Part 139 - Aerodromes - A ustra lia
- Date of inspection: October 9th, 2014.
- Upon request of:
ADB
Leuvensesteenweg, 585
B -1930 ZAVENTEM - BELGIUM
~~828 ~
'-1lfY&f~~
Issued at Antwerp, October 9th, 2014
Rud i Vandenb'empt
Inspector Industry
BUREAU VERITAS A NTWERP
Particulars of inspection: detailed hereafter
This certificate is only valid for a period of 5 years from the issuance date, as fa r as no changes of
production process, equipment characteristics nor of applicable requirements occurs duri ng this
period of validity
AVS.4.14.14007/CC-12
Issuing Center: ANTWERP
Page 2/ 2
VERITAS
The following survey operations have been carried out without noticeable rema rk:
•
•
Attendance to tests at the Laboratory premises of the manufacturer:
o Examination of test equipment
o Checking of installation of units before testing
o Attendance to photometric tests per applicable procedures and method
o Attendance to the Colorimetric tests per applica ble procedure & method
Test results are detailed in the attached test record s.
CONCLUSION
Taking into account the satisfactory results of actual tests and examinations we confirm
that the manufacturing and the test results for the above specified units are in
conformity with applicable standards, specifications and data sheets.
(Details of standards and specifications are indicated on page 1 of th is certificate and
data sheet as per catalogue).
ENCLOSURE
Test records of testing which have been attended, duly stamped for identification by
BUREAU VERITAS:
Test reports include:
• Results of intensity values inside the beam
• Isocandela curves
• Colorimetry
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of
production process, equipment characteristics nor of applicable requirements occurs during thi s
period of validity
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement