13-Q7-SK-IMX6-EP4
QsevenTM
... embedding excellence
MSC Q7-SK-IMX6-EP4
Qseven Starter Kit
www.mscembedded.com
Description
The Qseven Starter Kit for Qseven modules with
the Freescale i.MX6 processors is based on a 3.5”
Qseven carrier board MSC Q7-MB-EP4 and
contains all necessary products to quickly enable
the user to run and evaluate the Q7-IMX6 module
range. The kit does not contain a Qseven module in
order to give the user greater flexibility as to which
particular module version and CPU speed variant is
desired.
As part of the Qseven Starter Kit, the appropriate
heatspreader and a bootable Linux installation on
Flash SD Card will be supplied. A power supply
with cable kit is also included for convenience.
Direct screen output on a PC monitor is possible
using the on-board DVI/HDMI output. As an option
the Starter Kit is also available with a suitable LCD
kit consisting of a 12.1” XGA TFT panel resolution
(1024x768). Other LCD sizes and resolutions are
available upon request.
Assembly only takes a few moments and is well
documented in the “Getting Started” manual
provided, then the Qseven Starter Kit will be ready
to run. A Resource DVD with BSP, tools and all
documentation completes the Qseven Starter Kit.
Highlights
3.5” Qseven carrier board with socket for
Qseven
Socketmodules
for Qseven™
compatible modules
Rev. 1.20
VGA port and onboard LVDS connector
Heatspreader
withslot
heatsink
suitable Card
for all
Mini PCI Express
and MMC/SD
module
socket variants of the Q7-IMX6 family
Twopower
SATAsupply
and one
RS232
connector
12V
and
cableD-Sub9
kit included
for immediate operation of the Starter Kit
Optional LCD Kit with 7“ TFT at WVGA
Linux
installation in Flash, ready-to-run
resolution 800 x 480 including TFT and all
Resource
DVDLVDS
with BSP,
manuals etc.
necessary
and backlight
power
DVI/HDMI graphics output
cablesbus up to 400 kbit/s
LVDS graphics output on standard 30-pin
connector; backlight connector includes
adjustable backlight voltage and dimming
2x Ethernet (10/100/1000 LAN) connectors
SATA, 6x USB 2.0, UART, SD-Card socket
Getting Started manual
Optional 12.1” XGA (1024x768) TFT kit
MSC Vertriebs GmbH · www.msc-ge.com · [email protected]
Technical Data – Qseven Starterkit
Module Interface
Heatspreader
Qseven Module Connector
Socket for Qseven™ Rev. 1.20 compatible modules based on the
Freescale i.MX6 CPU (quad core, dual core, single core)
Heatspreader
Storage
SATA
1x SATA connector routed to Qseven module (availability depends on
module variant used; SATA data and power cable is provided)
mSATA Socket
Support for mSATA and mSATAmini cards
MMC/SD Card
Cardholder with 4 bit interface; Flash SD Card 8GB with Linux image
EEPROM
Serial EEPROM for EPI/DP extensions
Standard Interfaces
USB
7x USB 2.0 (availability depends on module variant used):
- 4x USB (Series-A Jack)
- 1x USB internal pin header
- USB on mini USB connector
- USB at Mini PCI Express socket
Serial
RS-232C on pin header driven by the on-board USB-to-RS232
converter (FT232RL)
ARM RS232 debug port
The ARM debug port is routed to the Qseven module
MSC Q7-IMX6-01 HSP-001 (suitable for all Q7-IMX6 modules)
Heatrail
MSC Q7-XXX-01 HTR-001 (already mounted on Q7-MB-EP4)
Power Supply
Power Supply
110-230V AC to 12V DC with cable kit connecting to 4 pin ATX style
power connector on Q7-MB-EP4 baseboard; features an additional
disk drive power connector usable for the SATA cable supplied.
Environment
Ambient Temperature
0º … +60º C operating, -25º … 85º C storage
Humidity
20 ... 80% operating, 5 … 95% storage (non condensing)
Mechanical
Dimensions
148 mm x 102mm
Optional Accessories
TFT Kit
12.1” XGA TFT panel with LED backlight and suitable cable set
(Other TFT kits with suitable cables are available on request)
CAN Bus
CAN Bus signals on on-board pin header
Mini PCI express
Socket for one Mini PCI Express module with USB
Audio Interface
AC’97 Audio
All Audio signals on pin header
Flat Panel / CRT Interface
Graphics
DVI connector, max. resolution depending on module
LCD Interface
LVDS interface on Jili30 connector, EEPROM to store display data,
Backlight connector (3.3/5/12V power and DIM signal)
Miscellaneous
Onboard System Signals
Power Button, Reset, Beeper
LAN Interface
Ethernet
One RJ45 connector with LEDs from Qseven module
One RJ45 connector with LEDs for PCIe-connected GbE LAN
Controller on board of the Q7-MB-EP4
Touch Controller
Resistive touch controller for 4/5-wire touch screens; three different
touch connectors for 4- and 5-wire touch screens
MSC Vertriebs GmbH · www.msc-ge.com · [email protected]
Order References – MSC Q7-SK-IMX6-EP4
Description
Reference
43885
Qseven Starterkit based on Q7-MB-EP4 baseboard, with Cooling and Power Supply
(Q7-IMX6 module not contained: please order separately from below list)
MSC Q7-SK-IMX6-EP4-KIT001
14565
Qseven Starterkit as before but with 12.1“ XGA TFT Kit
(Q7-IMX6 module not contained: please order separately from below list)
MSC Q7-SK-IMX6-EP4-KIT002
Copyright © 2012 MSC Vertriebs GmbH. All data is for information purposes only and is subject to change without notice. No guarantee for legal purposes is implied. Information in this document has been carefully checked,
however, no responsibility for inaccuracies has to be assumed. All brand or product names may be trademarks and property of their respective owners.
13-Q7-SK-IMX6-EP4-V04
Order Number
Suitable Qseven Modules
Order Number
Description
Reference
Suitable Modules with Freescale i.MX6 CPU:
42461
Qseven Module with Freescale i.MX6 Quad-Core CPU at 1.2GHz, with 2GB DRAM,
4GB Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, 1x SATA-II, 0 to +70°C
MSC Q7-IMX6-042
(PV)1
45703
Qseven Module with Freescale i.MX6 Quad-Core CPU at 1.0GHz, with 2GB DRAM,
4GB Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, 1x SATA interface, -40 to +85°C
MSC Q7-IMX6-143
(PV)1
43534
Qseven Module with Freescale i.MX6 Quad-Core CPU at 1.0GHz, with 1GB DRAM, no
Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, 1x SATA interface, -40 to +85°C
MSC Q7-IMX6-141
(OR)1
42459
Qseven Module with Freescale i.MX6 Dual-Core CPU at 1.2GHz, with 2GB DRAM,
4GB Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, 1x SATA-II, 0 to +70°C
MSC Q7-IMX6-022
(PV)1
44866
Qseven Module with Freescale i.MX6 Dual-Core CPU at 1.0GHz, with 1GB DRAM,
4GB Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, 1x SATA-II, -40 to +85°C
MSC Q7-IMX6-122
(PV)1
43536
Qseven Module with Freescale i.MX6 Dual-Core CPU at 1.0GHz, with 1GB DRAM,
no Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, 1x SATA-II, -40 to +85°C
MSC Q7-IMX6-121
(OR)1
42457
Qseven Module with Freescale i.MX6 Single-Core CPU at 1.0GHz, with 1GB DRAM,
4GB Flash, 7x USB 2.0 host, 1x USB 2.0 host/client, no SATA, 0 to +70°C
MSC Q7-IMX6-012
(PV)1
43853
Qseven Module with Freescale i.MX6 Single-Core CPU at 1.0GHz, with 1GB DRAM,
no Flash, 1x USB 2.0 host, 1x USB 2.0 host/client, no SATA, 0 to +70°C
MSC Q7-IMX6-011
(OR)1
1) PV = Preferred Variant; OR = On Request (in OEM quantities only)
Accessories
Order Number
Description
Reference
38955
CAN bus Adapter board with CAN transceiver and Sub-D connector and cable
MSC CAN-IF-001
Take a Look - We Are Close to You
MSC Vertriebs GmbH · www.msc-ge.com · [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement