DTS Catalogue - Ex Lighting Fittings Pages DTS Catalogue

DTS Catalogue - Ex Lighting Fittings Pages DTS Catalogue
Ex Lighting Fittings
24
26
www.tnb-hazardous.com
Ex Lighting Fittings
25
www.tnb.com
A Member of the ABB Group
Ex Lighting Fittings - Selection Guide
Ex Lighting Range
Zones
Dust
Gas
Groups Groups
Protection Type
XFF
Page 28
26
www.tnb-hazardous.com
XFP
Page 30
XEL
Page 32
XEP
Page 34
XF
Page 36
XDF
Page 40
EVS
Page 42
EVN
Page 44
EVD
Page 46
ESB
Page 48
Ex Lighting Fittings - Selection Guide
Ex Emergency & Escape Lighting Range
XFF-EM
Page 50
XFP-EM
Page 52
XEL-BAES
Page 54
EVS-EM
Page 58
EVS-EMA
Page 60
EVN-EM
Page 62
EVD-EM
Page 64
ESB-EM
Page 66
27
www.tnb.com
A Member of the ABB Group
XFF Range
Tubular fluorescent fitting
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• All components mounted on sliding gear tray for
easy installation and maintenance
• Standard components used inside body allowing
reduced maintenance costs
• Available in polycarbonate (light, high impact resistant)
or in glass (specific chemical environment & paint shop)
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
28
Approved to: EN60079-0, 60079-1, 60079-31
EC TYPE Examination Certificate:
INERIS 11 ATEX 0051X
Ex II 2 G
Ex d IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (All Polycarbonate tubes)
Ex d IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass tubes)
Ex d IIB T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass versions - XFR140,
XFR165, XFF240 and XFF265)
Ex II 2 D
Ex tb IIIC T80°C Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +55ºC
The fixture is supplied with non-barrier cable glands. For installations in either
Zone 1 or in the presence of Group IIC gases, barrier glands are required.
Please refer to EN-60079-14.
www.tnb-hazardous.com
Ex lighting - XFF Range
Technical Specifications
Dimensions
165
Wiring
Configuration
Rating (W)
Nominal
Current (A)
Diffuser
XFR120-0G000
5 Wire
1 x 18
0.15
Polycarbonate
780
565
5.5
XFR136-0G000
5 Wire
1 x PL36
0.2
Polycarbonate
780
565
6
XFR140-0G000
5 Wire
1 x 36
0.2
Polycarbonate
1385
1170
9
XFR155-0G000**
5 Wire
1 x PL55
0.25
Polycarbonate
780
565
6
XFR165-0G000
5 Wire
1 x 58
0.35
Polycarbonate
1690
1475
11
XFF220-0G000
5 Wire
2 x 18
0.3
Polycarbonate
780
565
6.5
XFF236-0G000
5 Wire
2 x PL36
0.4
Polycarbonate
780
565
6.5
XFF240-0G000
5 Wire
2 x 36
0.4
Polycarbonate
1385
1170
10
XFF255-0G000**
5 Wire
2 x PL55
0.5
Polycarbonate
780
565
6.5
XFF265-0G000
5 Wire
2 x 58
0.5
Polycarbonate
1690
1475
12
XFR120V-0G000
5 Wire
1 x 18
0.15
Glass
780
565
7
XFR136V-0G000
5 Wire
1 x PL36
0.2
Glass
780
565
8
XFR140V-0G000
5 Wire
1 x 36
0.2
Glass
1385
1170
17
XFR155V-0G000**
5 Wire
1 x PL55
0.25
Glass
780
565
8
XFR165V-0G000
5 Wire
1 x 58
0.35
Glass
1690
1475
17
XFF220V-0G000
5 Wire
2 x 18
0.3
Glass
780
565
8.5
XFF236V-0G000
5 Wire
2 x PL36
0.4
Glass
780
565
8.5
XFF240V-0G000
5 Wire
2 x 36
0.4
Glass
1385
1170
18
XFF255V-0G000**
5 Wire
2 x PL55
0.5
Glass
780
565
8.5
XFF265V-0G000
5 Wire
2 x 58
0.5
Glass
1690
1475
20
Type
Dimensions (mm)
A
B
Weight (kg)
**T5 for gas or T95ºC for dust when supply is 240V AC
Enclosure
End caps according to standard:
EN1706:EN AC-AISi12(Fe) DF or
EN AC-AISi10Mg(a) DF marine grade aluminium
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
(brackets for ceiling mounting included)
Rated voltages
Electronic ballast:
AC/DC 110-260V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: Two entries 3/4” NPT included
One 3/4” Nickel Plated Brass plug (EXN/075/SP)
One cable gland (EXN05AMC3) - 3/4” NPT Nickel
Plated Brass for non-armoured cable, diameter 12-16mm
Terminal block (plug in terminal block)
Up to 10mm² (rigid wire), 6mm² (flexible wire)
Terminals supplied L1, L2, L3, N, PE (looping possible
with 1 additional cable gland)
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
G11 compact fluorescent PL lamp
Shock proof kit
See dimension column A
D036 - 1690mm
Spares
D035 - 1385mm
D034 - 780mm
Other options
Stainless steel shock proof kit 304L
Colour (standard)
XF****-0G000 - Yellow offshore, RAL 1003
Colour options
XF****-BG000 - Grey, RAL 7035
XF****-CG000 - Black, RAL 9004
XF****-DG000 - Hammered Blue, RAL 5015
XF****-FG000 - Red, RAL 3001
XF****-GG000 - Blue, RAL 5010
XF****- JG000 - Green, RAL 6032
XF****-MG000 - White, RAL 9010
•
•
•
•
•
•
•
& Fixings Accessories see pages 90-95
Related Products
29
EXL Conduit
148
Stopping Plugs 174
GUV Range
120
Ex d Cable
Gland
162
www.tnb.com
A Member of the ABB Group
XFP Range
Tubular fluorescent fitting with
automatic switch off
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• All components mounted on sliding gear tray for
easy installation and maintenance
• Standard components used inside body allowing
reduced maintenance costs
• Available in polycarbonate (light, high impact resistant)
or in glass (specific chemical environment & paint shop)
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
30
www.tnb-hazardous.com
Approved to: EN60079-0, 60079-1, 60079-7
EC TYPE Examination Certificate:
INERIS 11 ATEX 0052X
Ex II 2 G
Ex de IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (All Polycarbonate tubes)
Ex de IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass tubes)
Ex de IIB T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass versions - XFP140V,
XFP165V, XFP240V and XFP265V)
Ex II 2 D
Ex tb IIIC T80°C Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +55ºC
Ex lighting - XFP Range
Technical Specifications
Dimensions
260
165
Wiring
Configuration
Rating (W)
Nominal
Current (A)
Diffuser
XFP120-0G000
3 Wire
1 x 18
0.15
Polycarbonate
780
565
5.5
XFP136-0G000
3 Wire
1 x PL36
0.2
Polycarbonate
780
565
6
XFP140-0G000
3 Wire
1 x 36
0.2
Polycarbonate
1385
1170
9
XFP155-0G000**
3 Wire
1 x PL55
0.25
Polycarbonate
780
565
6
XFP165-0G000
3 Wire
1 x 58
0.35
Polycarbonate
1690
1475
11
XFP220-0G000
3 Wire
2 x 18
0.3
Polycarbonate
780
565
6.5
XFP236-0G000
3 Wire
2 x PL36
0.4
Polycarbonate
780
565
6.5
XFP240-0G000
3 Wire
2 x 36
0.4
Polycarbonate
1385
1170
10
XFP255-0G000**
3 Wire
2 x PL55
0.5
Polycarbonate
780
565
12
XFP265-0G000
3 Wire
2 x 58
0.5
Polycarbonate
1690
1475
12
XFP120V-0G000
3 Wire
1 x 18
0.15
Glass
780
565
7
XFP136V-0G000
3 Wire
1 x PL36
0.2
Glass
780
565
8
XFP140V-0G000
3 Wire
1 x 36
0.2
Glass
1385
1170
17
XFP155V-0G000**
3 Wire
1 x PL55
0.25
Glass
780
565
8
XFP165V-0G000
3 Wire
1 x 58
0.35
Glass
1690
1475
17
Type
Dimensions (mm)
A
B
Weight (kg)
XFP220V-0G000
3 Wire
2 x 18
0.3
Glass
780
565
8.5
XFP236V-0G000
3 Wire
2 x PL36
0.4
Glass
780
565
8.5
XFP240V-0G000
3 Wire
2 x 36
0.4
Glass
1385
1170
18
XFP255V-0G000**
3 Wire
2 x PL55
0.5
Glass
780
565
18
XFP265V-0G000
3 Wire
2 x 58
0.5
Glass
1690
1475
20
**T5 for gas or T95ºC for dust when supply is 240V AC
Enclosure
End caps according to standard:
EN1706:EN AC-AISi12(Fe) DF or EN ACAISi10Mg(a) DF marine grade aluminium
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
(brackets for ceiling mounting included)
Rated voltages
Standard electronic ballast:
AC/DC 110-260V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: One entry M20
One cable gland (EXN04MMC2) - M20 Nickel
Plated Brass for non-armoured cable,
diameter 10-16mm
Terminal block (plug in terminal block)
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Terminals supplied L, N, PE
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
G11 compact fluorescent PL lamp
Other options
Stainless steel shock proof kit 304L
Shock proof kit
See dimension column A
D036 - 1690mm
D035 - 1385mm
D034 - 780mm
Colour (standard)
XFP***-0G000 - Yellow offshore, RAL 1003
Colour options
XFP***-BG000 - Grey, RAL 7035
XFP***-CG000 - Black, RAL 9004
XFP***-DG000 - Hammered Blue, RAL 5015
XFP***-FG000 - Red, RAL 3001
XFP***-GG000 - Blue, RAL 5010
XFP***- JG000 - Green, RAL 6032
XFP***-MG000 - White, RAL 9010
•
•
•
•
•
•
•
Related Products
31
EXL Conduit
148
Stopping Plugs 174
GUV Range
120
Ex d Cable
Gland
162
www.tnb.com
A Member of the ABB Group
XEL Range
Miniature tubular fluorescent fitting
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• All components mounted on the gear tray for easy
installation and maintenance
• Standard components used inside the body allowing
reduced maintenance costs
• Available in polycarbonate (light, high impact resistant)
or in glass (for specific chemical environment and paint
shop for easy cleaning)
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
32
Approved to: EN60079-0, 60079-1, 60079-7, 60079-31
EC TYPE Examination Certificate:
INERIS II ATEX 0051X
Ex II 2 G
Ex d IIC T6 Gb
Ex II 2 D
Ex tb IIIC T80°C Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +55ºC
The fixture is supplied with non-barrier cable glands. For installations in either
Zone 1 or in the presence of Group IIC gases, barrier glands are required.
Please refer to EN-60079-14
www.tnb-hazardous.com
Ex lighting - XEL Range
Technical Specifications
Dimensions
A 455
B 240
165
Wiring
Configuration
Rating (W)
Nominal
Current (A)
Diffuser
XEL3008-0G000
5 Wire
1x8
0.1
Polycarbonate
455
240
5
XEL3009-0G000
5 Wire
1 x PL9
0.1
Polycarbonate
455
240
9
XEL30011-0G000
5 Wire
1 x PL11
0.1
Polycarbonate
455
240
5
XEL120-0G000
5 Wire
1 x PL18
0.3
Polycarbonate
455
240
4.5
XEL220-0G000
5 Wire
2 x PL18
0.5
Polycarbonate
455
240
5
XEL30028-0G000
5 Wire
2x8
0.1
Polycarbonate
455
240
5
XEL3008V-0G000
5 Wire
1x8
0.1
Glass
455
240
7
XEL3009V-0G000
5 Wire
1 x PL9
0.1
Glass
455
240
9
XEL30011V-0G000
5 Wire
1 x PL11
0.1
Glass
455
240
7
XEL120V-0G000
5 Wire
1 x PL18
0.3
Glass
455
240
6.5
XEL220V-0G000
5 Wire
2 x PL18
0.5
Glass
455
240
7
XEL30028V-0G000
5 Wire
2x8
0.1
Glass
455
240
7
Type
Enclosure
End caps according to standard:
EN1706:EN AC-AISi12(Fe) DF or
EN AC-AISi10Mg(a) DF marine grade aluminium
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
(brackets for ceiling mounting included)
Rated voltages
Standard electronic ballast:
AC/DC 220-240V, 50-60Hz
Power factor
Up to 0.98
Cable entries
XEL: Two entries 3/4” NPT included
One 3/4” Nickel Plated Brass plug (EXN/075/SP)
One cable gland (EXN05AMC3) - 3/4” NPT Nickel
Plated Brass for non-armoured cable,
diameter 12-16mm
Terminal block
Up to 10mm² (rigid wire), 6mm² (flexible wire)
Terminals supplied L1, L2, L3, N, PE (looping possible
with 1 additional cable gland)
Dimensions (mm)
A
B
Weight (kg)
Lamps (order separately)
T5 bi-pin G5 tubes, Ø 16 coolwhite 4000°K
Compact fluorescent PL lamp with G11 base (18W)
or G23 (7W, 9W, 11W)
Colour (standard)
XEL***-0G000 - Yellow offshore, RAL 1003
Colour options
XEL***-BG000 - Grey, RAL 7035
XEL***-CG000 - Black, RAL 9004
XEL***-DG000 - Hammered Blue, RAL 5015
XEL***-FG000 - Red, RAL 3001
XEL***-GG000 - Blue, RAL 5010
XEL***- JG000 - Green, RAL 6032
XEL***-MG000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
33
EXL Conduit
148
Stopping Plugs 174
GUV Range
120
Ex d Cable
Gland
162
www.tnb.com
A Member of the ABB Group
XEP Range
Miniature tubular fluorescent fitting
with automatic switch off
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• Maintenance in hazardous area - quick and easy
isolation switch for safe maintenance in hazardous area
• All components mounted on the gear tray for easy
installation and maintenance
• Standard components used inside the body allowing
reduced maintenance costs
• Available in polycarbonate (light, high impact resistant)
or in glass (specific chemical environment & paint shop)
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
34
www.tnb-hazardous.com
Approved to: EN60079-0, 60079-1, 60079-7
EC TYPE Examination Certificate:
INERIS II ATEX 0052X
Ex II 2 G
Ex de IIC T6 Gb
Ex II 2 D
Ex tb IIIC T80°C Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +55ºC
Ex lighting - XEP Range
Technical Specifications
Dimensions
A 455
165
260
B 240
Wiring
Configuration
Rating (W)
Nominal
Current (A)
Diffuser
XEP3008-0G000
3 Wire
1x8
0.1
Polycarbonate
455
240
XEP3009-0G000
3 Wire
1 x PL9
0.1
Polycarbonate
455
240
5
XEP30011-0G000
3 Wire
1 x PL11
0.1
Polycarbonate
455
240
5
XEP120-0G000
3 Wire
1 x PL18
0.3
Polycarbonate
455
240
4.5
XEP220-0G000
3 Wire
2 x PL18
0.5
Polycarbonate
455
240
5
XEP30028-0G000
3 Wire
2x8
0.1
Polycarbonate
455
240
5
XEP3008V-0G000
3 Wire
1x8
0.1
Glass
455
240
7
XEP3009V-0G000
3 Wire
1 x PL9
0.1
Glass
455
240
7
XEP30011V-0G000
3 Wire
1 x PL11
0.1
Glass
455
240
7
XEP120V-0G000
3 Wire
1 x PL18
0.3
Glass
455
240
6.5
XEP220V-0G000
3 Wire
2 x PL18
0.5
Glass
455
240
7
XEP30028V-0G000
3 Wire
2x8
0.1
Glass
455
240
7
Type
Enclosure
End caps according to standard:
EN1706:EN AC-AlSi12(Fe) DF or
EN AC-AlSi10Mg(a) DF marine grade aluminium
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
(brackets for ceiling mounting included)
Rated voltages
Standard electronic ballast:
AC/DC 220-240V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: One M20 cable entry included
One cable gland (EXN04MMC2), Nickel Plated Brass
for non-armoured cable, diameter 10-16mm
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Terminals supplied for L, N, PE
Dimensions (mm)
A
B
Weight (kg)
5
Lamps (order separately)
T5 bi-pin G5 tubes, Ø 16 coolwhite 4000°K
Compact fluorescent PL lamp with G11 base (18W)
or G23 (7W, 9W, 11W)
Colour (standard)
XEP***-0G000 - Yellow offshore, RAL 1003
Colour options
XEP***-BG000 - Grey, RAL 7035
XEP***-CG000 - Black, RAL 9004
XEP***-DG000 - Hammered Blue, RAL 5015
XEP***-FG000 - Red, RAL 3001
XEP***-GG000 - Blue, RAL 5010
XEP***- JG000 - Green, RAL 6032
XEP***-MG000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
35
EXL Conduit
148
Stopping Plugs 174
GUV Range
120
Ex d Cable
Gland
162
www.tnb.com
A Member of the ABB Group
XHM : Also available pre mounted
(see opposite for details)
XF Range
Floodlight fittings
Approvals / Characteristics
Features
• Compact, lightweight and robust
• Ex e integral juction box: easy connection
• Excellent photometric properties, wide or narrow beam
• Internationally recognised
• Supplied with lamp installed and cable gland
• Supplied with offshore grade paint
Certification & Standards
Approved to: EN60079-0, 60079-1, 60079-7
EC TYPE Examination Certificate:
LCIE 00 ATEX 6019X / IECEx LCI 11-0062X
Ex II 2 G
Ex de IIB T1 to T5 Gb for ≤ -20ºC to ≤ +60ºC
depending on model
IP test: IP66 IEC 60529 (2001)
36
www.tnb-hazardous.com
Ex lighting - XF Range
Technical Specifications
Dimensions
Standard Flat
Type*
Mounting
Pole Mounting
Nominal
Rating (W)
Nominal
Current (A)
-20ºC to +40ºC
Temperature Class
-20ºC to +60ºC
Weight (kg)
XSF70P-00000
Flat
1 x 70W HP Sodium
0.4
T4
T3
17
XSF70G-00000
Pole
1 x 70W HP Sodium
0.4
T4
T3
17
XSF150P-00000
Flat
1 x 150W HP Sodium
0.8
T4
T3
17
XSF150G-00000
Pole
1 x 150W HP Sodium
0.8
T4
T3
17
XSF250P-00000
Flat
1 x 250W HP Sodium
1.3
T3
T3
18
XSF250G-00000
Pole
1 x 250W HP Sodium
1.3
T3
T3
18
XSF400P-00000
Flat
1 x 400W HP Sodium
2.1
T3
T2
20
XSF400G-00000
Pole
1 x 400W HP Sodium
2.1
T3
T2
20
XQF250P-00000
Flat
1 x 250W Metal Halide
1.3
T3
T2
20
XQF250G-00000
Pole
1 x 250W Metal Halide
1.3
T3
T3
18
XQF400P-00000
Flat
1 x 400W Metal Halide
2.1
T3
T3
18
XQF400G-00000
Pole
1 x 400W Metal Halide
2.1
T3
T2
20
XEF110P-00000
Flat
2 x 55W Halogen (12V)
9.2
T5
T5
13
XEF110G-00000
Pole
2 x 55W Halogen (12V)
9.2
T5
T5
13
XEF140P-00000
Flat
2 x 70W Halogen (24V)
5.8
T5
T5
13
XEF140G-00000
Pole
2 x 70W Halogen (24V)
5.8
T5
T5
13
*X... F... -0A000 (to complete with nominal rating & mounting) - Narrow beam, for example XQF400P-0A000
Enclosure
Marine grade aluminium alloy type according to
EN1706:EN AC-AlSi7 Mg 0,6 T6
Cataphoretically treated
12mm toughened glass
Rated voltages
Version HPS/metal halide:
Standard: 230V 50Hz ferromagnetic ballast,
with capacitor
Option: ferromagnetic ballast
- 220V 60Hz
- 120V 60Hz on few models
Power factor
Up to 0.85 for version with compensated ballast
(Sodium HP and metal halide)
Cable entries
Standard: Two entries M20 included
One plug (EXN/M20/HSP) and one cable gland
(EXN04MMC2) - Nickel Plated Brass ISO M20 for
non-armoured cable, diameter 10-16mm
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Terminal supplies for L, N, PE
Lamps (Installed)
Polished aluminium reflector
Standard: wide beam
Option: narrow beam
Fixing
Standard:galvanised steel flat mounting bracket,
yellow polyester paint RAL1003
Pole mounted: Ø 40 to 60mm
Other options
Sling (SC100 ELINGUE)
FC 108 (CLAMP FOR BEAM MOUNTING)
SC100 (SAFETY HARNESS)
SA 103 (Jobsite option)
Galvanised steel support with base plate (SA103)
XHM... Pre wired masthead floodlighting systems:
Full system with 2 or 4 floodlights
For example XHM 4400 (4 x 400 W HPS)
(to complete with nominal rating)
Colour (standard)
X*****-00000 - Yellow offshore, RAL 1003
Colour option
X*****-B0000 - Grey, RAL 7035
X*****-C0000 - Black, RAL 9004
X*****-D0000 - Hammered Blue, RAL 5015
X*****-F0000 - Red, RAL 3001
X*****-G0000 - Blue, RAL 5010
X*****- J0000 - Green, RAL 6032
X*****-M0000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
37
EXL Conduit
148
Stopping Plugs 176
GUV Range
120
Ex e Cable
Gland
166
www.tnb.com
A Member of the ABB Group
XFB / XFL Range
Warning lights and beacons
Approvals / Characteristics
Features
• Lightweight and robust for easy installation
• Static or flashing versions available for use in a
variety of applications
• Choice of 5 colours of globe
• 2 or 3 light versions available for traffic signals
• Supplied with single cable gland and lamps installed
• Including accessories (cable gland, plug & lampstand)
Certification & Standards
Approved to: EN60079-0, 60079-15, 60079-31
EC TYPE Examination Certificate:
Ex II 3 G / D
Ex nA IIC T5 Gc
Ex tc IIIC T100ºC Dc IP66 for ≤ -20ºC to ≤ +60ºC
38
www.tnb-hazardous.com
Ex lighting - XFB / XFL Range
Technical Specifications
8
Dimensions
Type
Rating (W)
Lamp
Globe Colour*
Version
Rated Voltages
Weight (kg)
XFB30-00000
1 x 28
E27
Red
Halogen
AC 230V 50/60Hz
3.5
XFB70-00000
1x8
E27
Red
LED
AC 100-240V 50/60Hz
3.5
XFL30P-00000
30 Joules
Picots
Red
Xenon flash
AC 230V 50/60Hz
4
XFL30P-0C000
30 Joules
Picots
Red
Xenon flash
AC 100V 50/60Hz
4
XFL30P-0D000
30 Joules
Picots
Red
Xenon flash
DC 24V
4
XFL30P-0E000
30 Joules
Picots
Red
Xenon flash
DC 48V
4
XFL30P-0F000
30 Joules
Picots
Red
Xenon flash
DC 110V
4
XFB230-00000
2 x 28
E27
Red / Green
Halogen
AC 230V 50/60Hz
7
XFB270-00000
2x8
E27
Red / Green
LED
AC 100-240V 50/60Hz
7
XFL230-00000
2 x 30 Joules
Picots
Red / Green
Xenon Flash
AC 230V 50/60Hz
8
XFL230-0C000
2 x 30 Joules
Picots
Red / Green
Xenon Flash
AC 100V 50/60Hz
8
XFL230-0D000
2 x 30 Joules
Picots
Red / Green
Xenon Flash
DC 24V 50/60Hz
8
XFL230-0E000
2 x 30 Joules
Picots
Red / Green
Xenon Flash
DC 48V 50/60Hz
8
XFL230-0F000
2 x 30 Joules
Picots
Red / Green
Xenon Flash
DC 110V 50/60Hz
8
XFB330-00000
3 x 28
E27
Red / Yellow / Green
Halogen
AC 230V 50/60Hz
10.5
XFB370-00000
3x8
E27
Red / Yellow / Green
LED
AC 100-240V 50/60Hz
10.5
XFL330-00000
3 x 30 Joules
Picots
Red / Yellow / Green
Xenon Flash
AC 230V 50/60Hz
12
XFL330-0C000
3 x 30 Joules
Picots
Red / Yellow / Green
Xenon Flash
AC 100V 50/60Hz
12
XFL330-0D000
3 x 30 Joules
Picots
Red / Yellow / Green
Xenon Flash
DC 24V
12
XFL330-0E000
3 x 30 Joules
Picots
Red / Yellow / Green
Xenon Flash
DC 48V
12
XFL330-0F000
3 x 30 Joules
Picots
Red / Yellow / Green
Xenon Flash
DC 110V
12
*Choice of globe colours: XF...-00000 - Red, XF...-000A0 - Transparent globe, XF...-000B0 - Green globe, XF...-000C0 - Orange globe, XF...-000D0 - Blue globe
**Colour combination: please contact Sales for more information
Enclosure
Marine grade aluminium alloy type
EN1706 AC-43100KF-AlSi 10Mg
Aluminium reflector
Temperature
Ambient temperature: -20°C to +60°C
Cable entries
Standard: Two entries M20 included
One Nickel Plated Brass plug (EXN/M20/HSP ) and
one cable gland (EXN04MMC2) - Nickel Plated Brass
ISO M20 for non-armoured cable, diameter 10-16mm
Terminal block
Up to 6mm2
Terminals supplied for L, N, PE
Lamps (supplied)
For xenon flash versions
Flashing rate: 45 to 60 - per minute
Globe
Polycarbonate, thickness 3mm
Colour (standard)
XF****-00000 - Yellow offshore, RAL 1003
Colour options
XF****-B0000 - Grey, RAL 7035
XF****-C0000 - Black, RAL 9004
XF****-D0000 - Hammered Blue, RAL 5015
XF****-F0000 - Red, RAL 3001
XF****-G0000 - Blue, RAL 5010
XF****- J0000 - Green, RAL 6032
XF****-M0000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
39
EXL Conduit
148
Stopping Plugs 176
GUV Range
120
Thread
Convertors
170
www.tnb.com
A Member of the ABB Group
XDF Range
Drilling fluorescent fitting
Approvals / Characteristics
Features
•
•
•
•
•
•
•
Vibration resistant lighting system
Plug in system for fast installation
Designed to minimise heat build up and overheating
Corrosion resistant ideal for marine applications
Hazardous and safe area versions available
Including accessories (socket, plug, fixation & cable)
Supplied with offshore grade paint
Certification & Standards
X
40
www.tnb-hazardous.com
Approved to: EN60079-0, 60079-15
EC TYPE Examination Certificate:
Ex II 3 G / D
Ex nA IIC T4 Gc
Ex tc IIIC T135ºC Dc IP6X
Temperature range: -20ºC to +60ºC
Ex lighting - XDF Range
Technical Specifications
Dimensions
B
A
264
80
11
145
155
145
108
220
108
Rated Voltage
Rating (W)
Nominal
Current (A)
Diffuser
A
B
Weight (kg)
XDF140-00000
230V 50Hz
1 x 36
0.20
Polycarbonate
1173
1540
8.5
XDF165-00000
230V 50Hz
1 x 58
0.35
Polycarbonate
1474
1841
9
XDF140-0D000
220V 60Hz
1 x 36
0.20
Polycarbonate
1173
1540
8.5
XDF165-0D000
220V 60Hz
1 x 58
0.35
Polycarbonate
1474
1841
9
Type
Enclosure
End caps according to standard:
EN1706:EN AC-AISi12(Fe) DF or
EN AC-AISi10Mg(a) DF marine grade aluminium
Including offshore option
Yellow offshore polyurethane paint RAL 1003
UV protected extruded polycarbonate tube,
thickness 2.5mm
Wiring Diagram
Rated voltages
Ferromagnetic ballast
Cable entries
Standard: Two M20 cable entries
Supplied with:
One plug entry: male - 2 poles & earth 10Amp - 250VAC
One socket entry: female - 2 poles & earth 10 Amp - 250VAC
One extendable cable with male plug and female
socket (Helical cable) expandable to 5 metre max
Terminal block (plug in terminal block)
Up to 6mm²
Terminals supplied L, N, PE
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
Fixing (included)
2 Brackets for beam clamp fixing
Other options
Other voltage ratings: on request
Power
Supply
Upto 8
Upto 8
XDF
XDF
XDF
XDF
Upto 8
Must be used with XD104R - Junction box
For 3 x 8 = 24 light fitting
Contact Sales for further details
Spares & Fixings Accessories see pages 90-95
XDF
XDF
Related Products
41
EXL Conduit
148
Stopping Plugs 176
GUV Range
120
www.tnb.com
A Member of the ABB Group
EVS Range
Fluorescent fitting with easy disconnect
Approvals / Characteristics
Features
•
•
•
•
•
•
Easy disconnector for safer maintenance out of zones
Double central locking for ingress protection
Main body constructed of a GRP for high impact strength
Polycarbonate diffuser to resist harsh environments
Automatic switch off upon opening for safe maintenance
All components mounted on hinged and removable gear
tray which gives easy access for maintenance
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Approved to: EN60079-0, 60079-1, 60079-5, 60079-7, 60079-31
EC TYPE Examination Certificate:
LCIE 11 ATEX 3065X
IEC Ex LCI 11.0053X
Ex II 2 G
Ex de IIC T4 Gb for ≤ -40ºC to ≤ +60ºC
Ex de IIC T5 Gb for ≤ -40ºC to ≤ +35ºC
Ex II 2 D
Ex tb IIIC T85°C Db IP6X
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP66 IEC 60529 (2001)
42
www.tnb-hazardous.com
Ex lighting - EVS Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Nominal
Current (A)
A
Dimensions (mm)
B
C
EVS120-0000
5 Wire Loop
1 x 18
0.09
785
432
400
5.5
EVS120-D000
5 Wire & Continuity plate
1 x 18
0.09
785
432
400
5.5
EVS140-0000
5 Wire Loop
1 x 36
0.17
1370
900
700
7.5
EVS140-D000
5 Wire & Continuity plate
1 x 36
0.17
1370
900
700
7.5
EVS165-0000
5 Wire Loop
1 x 58
0.26
1670
900
700
9
EVS165-D000
5 Wire & Continuity plate
1 x 58
0.26
1670
900
700
9
EVS220-0000
5 Wire Loop
2 x 18
0.17
785
432
400
6.5
EVS220-D000
5 Wire & Continuity plate
2 x 18
0.17
785
432
400
6.5
EVS240-0000
5 Wire Loop
2 x 36
0.33
1370
900
700
8.5
EVS240-D000
5 Wire & Continuity plate
2 x 36
0.33
1370
900
700
8.5
EVS265-0000
5 Wire Loop
2 x 58
0.5
1670
900
700
10
EVS265-D000
5 Wire & Continuity plate
2 x 58
0.5
1670
900
700
10
Type*
Weight (kg)
*(Through options) Define type rating: EVS...-B000 5 wires through (to complete with nominal rating),
EVS...-E000 5 wires through & 2 continuity plates (to complete with nominal rating)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
Rated voltages
Standard: electronic ballast
AC/DC 220-240V, 50/60Hz
Contact Sales Office for other voltage options
Power factor
Up to 0.98
Cable entries
Standard: Three M20 entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm (1 or 2 according to
number of plates)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Wiring L1, L2, L3, N, PE (5 wires)
5 wires through option: I max = 16 A max.
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Spares & Fixings Accessories see pages 90-95
Related Products
43
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EVN Range
Fluorescent fitting with diffuser
Approvals / Characteristics
Features
• Double central locking for ingress protection
• Main body constructed of a GRP for high impact strength
• Polycarbonate diffuser to resist harsh and
corrosive environments
• All components mounted on hinged and removable
gear tray which gives easy access for installation
and maintenenace
• Including accessories (cable gland & fixing brackets)
• Option: automatic switch off on opening
Certification & Standards
Approved to: EN60079-0, 60079-15, EN60079-31
EC TYPE Examination Certificate: Under new 94/9/EC self certified
Ex II 3 G
Ex nr IIC T4 Gb for ≤ -40ºC to ≤ +60ºC
Ex nr IIC T5 Gb for ≤ -40ºC to ≤ +35ºC
Ex II 3 D
Ex tc IIIC T85ºC Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP66 IEC 60529 (2001)
44
www.tnb-hazardous.com
Ex lighting - EVN Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Nominal
Current (A)
A
EVN120-0000
5 Wire Loop
1 x 18
0.17
785
432
400
4.2
EVN120-D000
5 Wire & Continuity plate
1 x 18
0.17
785
432
400
4.2
EVN140-0000
5 Wire Loop
1 x 36
0.17
1370
900
700
6.5
EVN140-D000
5 Wire & Continuity plate
1 x 36
0.17
1370
900
700
6.5
EVN165-0000
5 Wire Loop
1 x 58
0.26
1670
900
700
8
EVN165-D000
5 Wire & Continuity plate
1 x 58
0.26
1670
900
700
8
EVN220-0000
5 Wire Loop
2 x 18
0.17
785
432
400
4.5
EVN220-D000
5 Wire & Continuity plate
2 x 18
0.17
785
432
400
4.5
EVN240-0000
5 Wire Loop
2 x 36
0.33
1370
900
700
6.8
6.8
Type*
Dimensions (mm)
B
C
Weight (kg)
EVN240-D000
5 Wire & Continuity plate
2 x 36
0.33
1370
900
700
EVN265-0000
5 Wire Loop
2 x 58
0.5
1670
900
700
8.5
EVN265-D000
5 Wire & Continuity plate
2 x 58
0.5
1670
900
700
8.5
*(Through options) Define type rating: EVN...-B000 5 wires through (to complete with nominal rating),
EVN...-E000 5 wires through & 2 continuity plates (to complete with nominal rating)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
Rated voltages
Standard: electronic ballast
AC/DC 110-260V, 50-60Hz
Contact Sales Office for other voltage options
Power factor
Up to 0.98
Cable entries
Standard: Three M20 entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm (1 or 2 according to
number of plates)
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Wiring L1, L2, L3, N, PE (5 wires)
5 wire through option: I max 16 A
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Spares & Fixings Accessories see pages 90-95
Related Products
45
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EVD Range
Fluorescent fitting - developed
for dust environment
Approvals / Characteristics
Features
• Double central locking for ingress protection
• Main body constructed of a GRP for high impact strength
• Polycarbonate diffuser to resist harsh and
corrosive environments
• All components mounted on hinged and removable
gear tray which gives easy access for installation
and maintenance
• Including accessories (cable gland & fixing brackets)
• Option: automatic switch off on opening
Certification & Standards
Approved to: EN60079-0, 60079-31
EC TYPE Examination Certificate:
LCIE II ATEX 3092X
IECEx LCI 11.0064X
Ex II 2 D
Ex t IIIC T82ºC (≤ +60ºC) Db
Ex t IIIC T62ºC (≤ +40ºC) Db
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP66 IEC 60529 (2001)
46
www.tnb-hazardous.com
Ex lighting - EVD Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Nominal
Current (A)
A
Dimensions (mm)
B
C
EVD120-00J0
5 Wire Loop
1 x 18
0.09
785
432
400
4.2
EVD120-D0J0
5 Wire & Continuity plate
1 x 18
0.09
785
432
400
4.2
EVD140-00J0
5 Wire Loop
1 x 36
0.17
1370
900
700
6.5
EVD140-D0J0
5 Wire & Continuity plate
1 x 36
0.17
1370
900
700
6.5
EVD165-00J0
5 Wire Loop
1 x 58
0.26
1670
900
700
8
EVD165-D0J0
5 Wire & Continuity plate
1 x 58
0.26
1670
900
700
8
EVD220-00J0
5 Wire Loop
2 x 18
0.17
785
432
400
4.5
EVD220-D0J0
5 Wire & Continuity plate
2 x 18
0.17
785
432
400
4.5
EVD240-00J0
5 Wire Loop
2 x 36
0.33
1370
900
700
6.8
EVD240-D0J0
5 Wire & Continuity plate
2 x 36
0.33
1370
900
700
6.8
EVD265-00J0
5 Wire Loop
2 x 58
0.5
1670
900
700
8.5
EVD265-D0J0
5 Wire & Continuity plate
2 x 58
0.5
1670
900
700
8.5
Type*
Weight (kg)
*(Through options) EVD...-B0J0 - 5 Wires through (to complete with rating)
EVD...-E0J0 - 5 wires through & 2 continuity plates (to complete with rating)
EVD...-.0C0 - Automatic switch off on opening including electronic ballast (to complete with rating & wiring configuration)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
Rated voltages
Standard: electronic ballast
AC/DC 110-260V, 50-60Hz
Contact Sales Office for other voltage options
Power factor
Up to 0.98
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plugs and
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16m (1 or 2 according to
number of plates)
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Terminals supplied for L1, L2, L3, N, PE
5 wires through option: I max 16 A
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Spares & Fixings Accessories see pages 90-95
Related Products
47
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
ESB Range
Recessed fluorescent fitting
Approvals / Characteristics
Features
• Main body made from powder coated steel
• 6mm toughened glass making it perfect
for laboratories
• Automatic switch off upon opening
for safe maintenance
• Including accessories (cable gland)
Certification & Standards
Approved to: EN60079-0, 60079-1, 60079-7
EC TYPE Examination Certificate: Under 94/9/EC
INERIS II ATEX 0058X
Ex II 2 G
Ex de IIC T4 Gb for ≤ -20ºC to ≤ +40ºC
Glow wire test: 850°C EN60598-2-22
Safe operating temperature range: -20°C to +40ºC
IP test: IP64 IEC 60529 (2001)
48
www.tnb-hazardous.com
Ex lighting - ESB Range
Technical Specifications
Dimensions
Wiring
Configuration
Rating (W)
Nominal
Current (A)
Glass
ESB220-0000
5 Wire
2 x 18
0.17
Toughened
753
702
105
400 x 240
12.5
ESB220-A000
5 Wire
2 x 18
0.17
Frosted
753
702
105
400 x 240
12.5
ESB240-0000
5 Wire
2 x 36
0.33
Toughened
1364
1312
105
1000 x 240
20
ESB240-A000
5 Wire
2 x 36
0.33
Frosted
1364
1312
105
1000 x 240
20
ESB265-0000
5 Wire
2 x 58
0.5
Toughened
1664
1612
105
1300 x 240
25
ESB265-A000
5 Wire
2 x 58
0.5
Frosted
1664
1612
105
1300 x 240
25
Type
Enclosure
Steel housing and body painted in white polyester
powderpaint RAL 9016
6mm clear toughened glass panel (optional frosted
low lumen output)
Neoprene gasket
Dimensions (mm)
A
B
C
Rated voltages
Standard: electronic ballast
AC/DC 220-240V, 50-60Hz
Contact sales office for other voltages
Power factor
Up to 0.98
Cable entries
Two M20 cable entries included
One M20 Nylon stopping plug and
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
One M20 Nylon stopping plug (EX-M20)
F x F’
Weight (kg)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Terminals supplied for L1, L2, L3, N, PE
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Fixing
Fixing by 4 M6 threaded bolts (not supplied) joined
to the main body
Spares & Fixings Accessories see pages 90-95
Related Products
49
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
XFF-EM Range
Emergency tubular fluorescent fitting
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• All components mounted on the gear tray for easy
installation and maintenance
• Standard components used inside the body allowing
reduced maintenance costs
• Available in polycarbonate (light, high impact resistant)
or in glass (specific chemical environment & paint shop)
• Battery duration 2 hours
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
50
Approved to: EN60079-0, 60079-1, 60079-31
EC TYPE Examination Certificate:
INERIS 11 ATEX 0051X
Ex II 2 G
Ex d IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (All Polycarbonate tubes)
Ex d IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass tubes)
Ex d IIB T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass versions - XFR140EM
and XFF240EM)
Ex II 2 D
Ex tb IIIC T80°C Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
The fixture is supplied with non-barrier cable glands. For installations in either
Zone 1 or in the presence of Group IIC gases, barrier glands are required.
Please refer to EN-60079-14
www.tnb-hazardous.com
Ex Emergency lighting - XFF-EM Range
Technical Specifications
Dimensions
165
Wiring
Configuration
Rating (W)
Battery
Diffuser
XFR120EM-0G000
3 Wire
1 x 18
2h
Polycarbonate
780
565
7.5
XFR140EM-0G000
3 Wire
1 x 36
2h
Polycarbonate
1385
1170
9.5
XFF220EM-0G000
3 Wire
2 x 18
2h
Polycarbonate
780
565
7.5
XFF240EM-0G000
3 Wire
2 x 36
2h
Polycarbonate
1385
1170
9.5
XFR120VEM-0G000
3 Wire
1 x 18
2h
Glass
780
565
9.5
XFR140VEM-0G000
3 Wire
1 x 36
2h
Glass
1385
1170
9.5
XFF220VEM-0G000
3 Wire
2 x 18
2h
Glass
780
565
9.5
XFF240VEM-0G000
3 Wire
2 x 36
2h
Glass
1385
1170
9.5
Type
Enclosure
End caps and cover in marine grade aluminium
alloy type EN 1706 EN AC-AlSi12(Fe) DF or
EN AC-AlSi10 Mg(a) DF
Yellow offshore polyurethane paint RAL 1003
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
brackets for ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Electronic ballast:
XFF/XFR: AC/DC 220-240V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: Two entries 3/4” NPT included
One 3/4” Nickel Plated Brass plug (EXN/075/SP)
One cable gland (EXN05AMC3)- 3/4” NPT Nickel
Plated Brass for non-armoured cable,
diameter 12-16mm
Battery
Lumen output in emergency mode (1 tube lit)
40% for 18W
33% for 40W
Terminal block (plug in terminal block)
Up to 10mm² (rigid wire), 6mm² (flexible wire)
Supplied L1, 2, N, PE Terminals
Looping possible with additional cable gland
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Dimensions (mm)
A
B
Weight (kg)
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
(order separately)
T5 bi-pin 65 supplied with XEL
Other options
Stainless steel shockproof kit 304L
Colour (standard)
X*****-0G000 - Yellow offshore, RAL 1003
Colour options
X*****-BG000 - Grey, RAL 7035
X*****-CG000 - Black, RAL 9004
X*****-DG000 - Hammered Blue, RAL 5015
X*****-FG000 - Red, RAL 3001
X*****-GG000 - Blue, RAL 5010
X*****- JG000 - Green, RAL 6032
X*****-MG000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
51
EXL Conduit
148
Stopping Plugs 174
GUV Range
120
Ex d Cable
Gland
162
www.tnb.com
A Member of the ABB Group
XFP-EM Range
Emergency tubular fluorescent fitting
with automatic switch off
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• Maintenance in hazardous area is quick and easy with
isolation switch for safe maintenance
• All components mounted on the gear tray for easy
installation and maintenance
• Standard components used inside the body allowing
reduced maintenance costs
• Available in polycarbonate (light, high impact resistant)
or in glass (specific chemical environment & paint shop)
• Battery duration 2 hours
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
52
www.tnb-hazardous.com
Approved to: EN60079-0, 60079-1, 60079-7, 60079-31
EC TYPE Examination Certificate:
INERIS 11 ATEX 0052X
Ex II 2 G
Ex de IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (All Polycarbonate tubes)
Ex de IIC T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass tubes)
Ex de IIB T6 Gb for ≤ -20ºC to ≤ +55ºC (Glass versions - XFP140EM
and XFP240EM)
Ex II 2 D
Ex tb IIIC T80°C Db IP66
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
Ex Emergency lighting - XFP-EM Range
Technical Specifications
Dimensions
260
165
Wiring
Configuration
Rating (W)
Battery
Diffuser
XFP120EM-0G000
3 Wire
1 x 18
2h
Polycarbonate
780
565
7.5
XFP140EM-0G000
3 Wire
1 x 36
2h
Polycarbonate
1385
1170
9.5
XFP220EM-0G000
3 Wire
2 x 18
2h
Polycarbonate
780
565
7.5
XFP240EM-0G000
3 Wire
2 x 36
2h
Polycarbonate
1385
1170
9.5
XFP120VEM-0G000
3 Wire
1 x 18
2h
Glass
780
565
9.5
XFP140VEM-0G000
3 Wire
1 x 36
2h
Glass
1385
1170
11
XFP220VEM-0G000
3 Wire
2 x 18
2h
Glass
780
565
9.5
XFP240VEM-0G000
3 Wire
2 x 36
2h
Glass
1385
1170
11
Type
Enclosure
End caps and cover in marine grade aluminium
alloy type EN1706:EN AC-AlSi12(Fe) DF or
EN AC-AlSi10 Mg(a) DF
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
brackets for ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Standard: electronic ballast:
AC/DC 220-240V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard M20 cable entry included
One cable gland (EXN04MMC2) - Nickel Plated
Brass M20 for non-armoured cable,
diameter 10-16mm
Battery
Lumen output in emergency mode (1 tube lit)
40% for 18W
33% for 33W
Monitored by one LED
Dimensions (mm)
A
B
Weight (kg)
Terminal block (plug in terminal block)
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Supplied L1, 2, N, PE Terminals
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
Other options
Stainless steel shockproof kit 304L
Colour (standard)
XFP***-0G000 - Yellow offshore, RAL 1003
Colour options
XFP***-BG000 - Grey, RAL 7035
XFP***-CG000 - Black, RAL 9004
XFP***-DG000 - Hammered Blue, RAL 5015
XFP***-FG000 - Red, RAL 3001
XFP***-GG000 - Blue, RAL 5010
XFP***- JG000 - Green, RAL 6032
XFP***-MG000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
53
EFDC Range
122
Stopping Plugs 174
GUV Range
120
Ex e Cable
Gland
164
www.tnb.com
A Member of the ABB Group
Part No. B019T
XEL-BAES Range
Self-contained emergency lighting fitting
Approvals / Characteristics
Features
• Manufactured from marine grade aluminium
• Supplied with offshore grade paint
• All components mounted on the gear tray for easy
installation and maintenance
• Self contained luminaires with built in automatic
facility to give local indication of result, test or
control monitoring
• Available in polycarbonate (light, high impact resistant)
or in glass (specific chemical environment & paint shop)
• Battery duration 2 hours
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Polycarbonate
Version
Glass
Version
54
Approved to: EN60079-0, 60079-1, 60079-7, 60079-31, 60598-2-22
EC TYPE Examination Certificate:
Models SI & AI
Models A & AK
INERIS II ATEX 0052X
INERIS II ATEX 0051X
Ex II 2 G
Ex II 2 G
Ex de IIC T6 Gb
Ex d IIC T6 Gb
Ex II 2 D
Ex II 2 D
Ex tb IIIC T80ºC IP66 Db
Ex tb IIIC T80ºC IP66 Db
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -20°C to +55ºC
The fixture is supplied with non-barrier cable glands. For installations in either
Zone 1 or in the presence of Group IIC gases, barrier glands are required.
Please refer to EN-60079-14
www.tnb-hazardous.com
Ex Emergency lighting - XEL-BAES Range
Technical Specifications
Dimensions
455
455
240
165
165
260
240
SI & AI
A & AK
Testing Type
Switch Type (see diagrams)
Manual Automatic Addressable Unswitched Switch Off Combined Weight (kg)
Type
Function Rating (W) Diffuser
XEL3001-00000
Large area
1x8
Polycarbonate
●
–
–
●
–
–
XEL3002-00000*
Large area
2x8
Polycarbonate
●
–
–
●
–
–
5
Escape route
1x6
Polycarbonate
–
●
–
●
–
–
4.7
XEL80A-00000
5
XEL80AK-00000
Escape route
1x6
Polycarbonate
–
●
–
–
●
–
4.7
XEL80AI-00000
Escape route
1x6
Polycarbonate
–
●
–
–
–
●
5.5
XEL80SI-00000
Escape route
1x6
Polycarbonate
–
–
●
–
–
●
5.5
XEL300A-00000
Large area
1x8
Polycarbonate
–
●
–
●
–
–
5
XEL300AK-00000
Large area
1x8
Polycarbonate
–
●
–
–
●
–
5
XEL300AI-00000
Large area
1x8
Polycarbonate
–
●
–
–
–
●
5.5
XEL300SI-00000
Large area
1x8
Polycarbonate
–
–
●
–
–
●
5.5
XEL3001V-00000
Large area
1x8
Glass
●
–
–
●
–
–
7
XEL3002V-00000*
Large area
2x8
Glass
●
–
–
●
–
–
7
Escape route
1x6
Glass
–
●
–
●
–
–
6.5
XEL80VA-00000
XEL80VAK-00000
Escape route
1x6
Glass
–
●
–
–
●
–
6.5
XEL80VAI-00000
Escape route
1x6
Glass
–
●
–
–
–
●
7.3
XEL80VSI-00000
Escape route
1x6
Glass
–
–
●
–
–
●
7.3
XEL300VA-00000
Large area
1x8
Glass
–
●
–
●
–
–
7
XEL300VAK-00000
Large area
1x8
Glass
–
●
–
–
●
–
7
XEL300VAI-00000
Large area
1x8
Glass
●
–
–
–
●
7.5
XEL300VSI-00000
Large area
1x8
Glass
–
●
–
–
●
7.5
–
*Light always on
Enclosure
End caps and cover in marine grade aluminium
alloy type AS10GY30. Yellow offshore
polyurethane paint RAL 1003
UV protected extruded polycarbonate tube,
thickness 2.5mm
Borosilicate glass, thickness 7mm
Rated voltages and emergency function
Electronic ballast: AC/DC 230V, 50Hz
Power factor
Up to 0.98
Cable entries
Model SI & AI: One M20 cable entry included
One cable gland (EXN04MMC2) - Nickel Plated Brass
ISO M20 for non-armoured cable, diameter 10-16mm
Model A & AK: Two entries 3/4” NPT included
One 3/4” Nickel Plated Brass plug (EXN/075/SP)
One cable gland (EXN05AMC3) - 3/4” NPT Nickel Plated
Brass for non-armoured cable, diameter 12-16mm
Self test SATI
Safety lighting with automatic built in systems test
the lamps every 7 days and the battery pack every 12
weeks. Results of the test are displayed by yellow
and green diodes.
Healthy
Emergency or
Indicator
Lamp Fault
Test in
Progress
Battery
XEL80: Lumen output for 1 hour = 70lm,
XEL300: Lumen output for 1 hour = 280lm
Model XEL 3001 and XEL 3002 - 3 hour models
available for markets outside of France and are not
NFC approved
Terminal block
Terminals supplied for L, N, PE
Model A & AK: Up to 10mm² (rigid wire),
6mm² (flexible wire)
Terminals supplied for L, N, PE (looping possible with
additional cable glands)
Lamps (supplied installed)
XEL 80: emergency lamp: 1 x 6W tube with G5
lampholder (70 lumen), 2 charge lamp using LEDs
UNSWITCHED enclosure
Compulsary power socket
Fitting has to be removed
Maintenance must be done in
safe area
XEL 300: emergency lamp: 1 x 8W tube with G5
lampholder (280 lumen), 2 charge lamp using LEDs
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
brackets for ceiling mounting
Colour (standard)
XEL***-00000 - Yellow offshore, RAL 1003
Colour options
XEL***-B0000 - Grey, RAL 7035
XEL***-C0000 - Black, RAL 9004
XEL***-D0000 - Hammered Blue, RAL 5015
XEL***-F0000 - Red, RAL 3001
XEL***-G0000 - Blue, RAL 5010
XEL***- J0000 - Green, RAL 6032
XEL***-M0000 - White, RAL 9010
•
•
•
•
•
•
•
Enclosure with battery
SWITCH OFF
No power socket
External cut-out required
Maintenance done in
hazardous area
Enclosure with COMBINED
battery and supply switch off
No power socket
No external cut-out
Maintenance done in hazardous area
55
Fault
A Member of the ABB Group
XEL-BAES Range
Remote control units for emergency lighting
Provided by our
sister company
Regulations
Article EC 12 paragrah 6
Self-contained emergency lighting installations must
possess one or several devices allowing centralised control.
The devices most be located close to the master control
unit or one sub-division control units.
Technical Specifications
Type
Power Supply
Main Feature
Testing Type
Size (mm)
BT5F 621500
230V - 50-60Hz
Multi-brand compatibility ON / OFF offset
Unswitched - Switch off - combined
82 x 70 x 70
BT12V 621201
230V - 50-60Hz
Standard ON / OFF
Unswitched - Switch off - combined
82 x 70 x 70
56
www.tnb-hazardous.com
Remote Control Units - XEL-BAES Range
Standard Remote Control installation (BAES)
LINE IN
230V - 50Hz
Main
disconnect
Block 1
Block 2
Block 3
Remote Control installation with integrated self testing capabilities (SATI)
LINE IN
230V - 50Hz
Remote
control
Main
disconnect
Normally open contact,
close for SATI report
Sub disconnect
57
www.tnb.com
A Member of the ABB Group
EVS-EM Range
Emergency fluorescent fitting with easy disconnect
Approvals / Characteristics
Features
•
•
•
•
•
Easy disconnector for safer maintenance out of zones
Double central locking for ingress protection
Main body constructed of a GRP for high impact strength
Battery duration 2 hours
All components mounted on hinged and removable gear tray
which gives easy access for installation and maintenance
• Automatic switch off on opening for safe maintenance
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Approved to: EN60079-0, 60079-1, 60079-5, 60079-7, EN61241-1
EC TYPE Examination Certificate:
LCIE 11 ATEX 3065X
IEC Ex LCI 11.0053X
Ex II 2 G
Ex de IIC T4 Gb for ≤ -40ºC to ≤ +60ºC
Ex de IIC T5 Gb for ≤ -40ºC to ≤ +35ºC
Ex II 2 D
Ex tb IIIC T85ºC Db IP6X
Glow wire test: 960ºC EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
58
www.tnb-hazardous.com
Ex Emergency lighting - EVS-EM Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
A
EVS120EME-0000*
3 Wire
1 x 18
2h
0.09
785
432
400
7.5
EVS120EME-C000*
3 Wire & Continuity plate
1 x 18
2h
0.09
785
432
400
7.5
Type
Dimensions (mm)
B
C
Weight (kg)
EVS140EM-0000
3 Wire
1 x 36
2h
0.17
1370
900
700
9.5
EVS140EM-C000
3 Wire & Continuity plate
1 x 36
2h
0.17
1370
900
700
9.5
EVS220EME-0000*
3 Wire
2 x 18
2h
0.17
785
432
400
8.5
EVS220EME-C000*
3 Wire & Continuity plate
2 x 18
2h
0.17
785
432
400
8.5
EVS240EM-0000
3 Wire
2 x 36
2h
0.33
1370
900
700
10.5
EVS240EM-C000
3 Wire & Continuity plate
2 x 36
2h
0.33
1370
900
700
10.5
*Easy disconnect not available
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Standard: electronic ballast
AC/DC 220-240V, 50-60Hz
For other voltages contact Sales
Battery
Ni-Cd 7.2V 4Ah battery in flameproof case
Auto cut out of defective light
Lumen output in emergency mode (1 tube lit):
40% at 18W, 33% at 36W
Battery duration: 18W = 2 hours, 36W = 2hours
Monitored by one LED
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the emergency
tube is lit and the battery does not recharge), or in
non-maintained mode (when the main supply is
connected: the tubes are not lit, the battery charges /
when the main supply is off: the emergency tube is
lit and the battery does not recharge)
Power factor
Up to 0.98
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm (1 or 2 according to
number of plates)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Supplied L1, N, PE, 1, 2 Terminals
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Spares & Fixings Accessories see pages 90-95
Related Products
59
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EVS-EMA Range
Emergency fluorescent fitting with
automatic test, and “BlackStart” capabilities
Approvals / Characteristics
Features
• Double central locking for ingress protection
• Main body constructed of a GRP for high impact strength
• Polycarbonate diffuser to resist harsh and
corrosive environments
• All components mounted on hinged and removable gear tray
• Battery duration 3 hours
• Automatic testing for preventive maintenance
• Clear LED for visual inspection
• Automatic switch off on opening for safe maintenance
• Possibility using the emergency inhibit mode
• Including accessories (cable gland & fixing brackets)
Certification & Standards
Approved to: EN60079-0, 60079-1, 60079-5, 60079-7, EN60079-31
EC TYPE Examination Certificate:
LCIE 11 ATEX 3065X
IEC Ex LCI 11.0053X
Ex II 2 G
Ex de IIC T4 Gb for ≤ -40ºC to ≤ +60ºC
Ex de IIC T5 Gb for ≤ -40ºC to ≤ +35ºC
Ex II 2 D
Ex tb IIIC T85ºC Db IP6X
Glow wire test: 960°C EN605988-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
60
www.tnb-hazardous.com
Ex Emergency lighting - EVS-EMA Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
A
EVS120EMA-0000
3 / 5 Wire Loop
1 x 18
3h
0.09
785
432
400
7.5
EVS120EMA-D000
3 / 5 Wire & Continuity plate
1 x 18
3h
0.09
785
432
400
7.5
EVS140EMA-0000
3 / 5 Wire Loop
1 x 36
3h
0.17
1370
900
700
9.5
EVS140EMA-D000
3 / 5 Wire & Continuity plate
1 x 36
3h
0.17
1370
900
700
9.5
EVS220EMA-0000
3 / 5 Wire Loop
2 x 18
3h
0.17
785
432
400
8.5
EVS220EMA-D000
3 / 5 Wire & Continuity plate
2 x 18
3h
0.17
785
432
400
8.5
EVS240EMA-0000
3 / 5 Wire Loop
2 x 36
3h
0.33
1370
900
700
10.5
EVS240EMA-D000
3 / 5 Wire & Continuity plate
2 x 36
3h
0.33
1370
900
700
10.5
Type*
Dimensions (mm)
B
C
Weight (kg)
*Note: terminal blocks accept either 3 or 5 wire configurations (see instruction manual)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Steel cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm (1 or 2 according to
number of plates)
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
Rated voltages
Standard: electronic ballast
AC/DC 220-240V, 50-60Hz
For other voltages contact Sales
Power factor
Up to 0.98
For wiring please refer to the instruction
manual (drawings)
Downloads available at tnb-hazardous.com
Battery
Ni-Cd 6V 4Ah for 18W /
Ni-Cd 6V 7Ah for 36W battery in flameproof case
Auto cut out of defective light
Lumen output in emergency mode (1 tube lit): 40%
at 18W, 33% at 36W
Battery duration: 3h max 36W
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the
emergency tube is lit and the battery does not
recharge), or in non-maintained mode (when the
main supply is connected: the tubes are not lit,
the battery charges / when the main supply is off:
the emergency tube is lit and the battery does
not recharge)
BlackStart
It is possible to wire the EVS-EMA in order to open
the fixture in ATEX zones in a completely powered
down mode (battery disconnected)
Normal mode: If main power is off, battery powers
emergency tube, main tubes are not lit
Disabled mode (terminals B S not connected,
usually via switch): Power off, battery is
disconnected, and neither main, nor emergency
tubes are lit
Preventive maintenance - Self test
- Battery charge - daily
- Emergency lamp during 1min - weekly
- Battery charge capacity during 1hr - quaterly
- Clear system test display
Battery charge monitored by 2 LED
Healthy
(test OK)
Emergency or
Test in
Indicator
Progress
Lamp Fault (waiting end
(must be
of test)
replaced)
Fault
(replace
battery)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Terminals supplied L1, L2, L3, LS, N, PE
Lamps (order separately)
Command must be supplied with switch on line
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Spares & Fixings Accessories see pages 90-95
Related Products
61
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EVN-EM Range
Emergency fluorescent fitting
Approvals / Characteristics
Features
•
•
•
•
Double central locking for ingress protection
Main body constructed of a GRP for high impact strength
Battery duration 2 hours
All components mounted on hinged and removable
gear tray which gives easy access for maintenance
• Including accessories (cable gland & fixing brackets)
• Option: automatic switch off on opening
Certification & Standards
Approved to: EN60079-0, 60079-15
EC TYPE Examination Certificate:
Ex II 3 G
Ex nR IIC T4 Gb for ≤ -40ºC to ≤ +60ºC
Ex nR IIC T6 Gb for ≤ -40ºC to ≤ +35ºC
Ex II 3 D
Ex tc IIIC T85°C Dc IP6X
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
62
www.tnb-hazardous.com
Ex Emergency lighting - EVN-EM Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
A
5 Wire Loop
1 x 18
2h
0.09
785
432
400
EVN120EM-D000 5 Wire Loop & Continuity plate
1 x 18
2h
0.09
785
432
400
6.5
EVN140EM-0000
1 x 36
2h
0.17
1370
900
700
8.5
Type
EVN120EM-0000
5 Wire Loop
Dimensions (mm)
B
C
Weight (kg)
6.5
EVN140EM-D000 5 Wire Loop & Continuity plate
1 x 36
2h
0.17
1370
900
700
8.5
EVN220EM-0000
2 x 18
2h
0.17
785
432
400
7.5
5 Wire Loop
EVN220EM-D000 5 Wire Loop & Continuity plate
2 x 18
2h
0.17
785
432
400
7.5
EVN240EM-0000
2 x 36
2h
0.33
1370
900
700
10.5
2 x 36
2h
0.33
1370
900
700
10.5
5 Wire Loop
EVN240EM-D000 5 Wire Loop & Continuity plate
*EVN...EM-.0C0 Automatic switch off on opening (to complete with wiring configuration)
Enclosure
Fibreglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Standard: electronic ballast
AC/DC 220-220V, 50-60Hz
Battery
Ni-Cd 7.2V 4Ah battery
Lumen output in emergency mode (1 tube lit)
40% at 18W, 33% at 36W
Monitored by one LED:
1. operating in maintained mode;
- when the main supply is connected: the tubes
are lit, the battery charges
- when the main supply is off : the emergency
tube is lit and the battery does not recharge
2. Operating in non maintained mode;
- when the main supply is conneted : the tubes
are not lit, the battery charges
- when the main supply is off: the emergency
tube is lit and the battery does not recharge
Power factor
Up to 0.98
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Terminal block supplied: N, PE, L1, L2, L3, LS
(Looping possible with additional cable gland)
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
EMA version available upon request
(with automatic test) - similar to EVS-EMA
Spares & Fixings Accessories see pages 90-95
Related Products
63
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EVD-EM Range
Emergency fluorescent fitting
Approvals / Characteristics
Features
• Double central locking for ingress protection
• Main body constructed of a GRP for high impact strength
• Polycarbonate diffuser to resist harsh and
corrosive environments
• All components mounted on hinged and removable gear tray
which gives easy access for installation and maintenance
• Battery duration 2 hours
• Including accessories (cable gland & fixing brackets)
• Option: automatic switch off on opening
Certification & Standards
4
64
www.tnb-hazardous.com
Approved to: EN60079-0, 60079-31
EC TYPE Examination Certificate: Under new 94/9/EC self certified
LCIE II ATEX 3092X
IECEx LCI 11.0064X
Ex t IIIC T82ºC (≤ +60ºC) Db
Ex t IIIC T62ºC (≤ +40ºC) Db
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
Ex Emergency lighting - EVD-EM Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
A
5 Wire Loop
1 x 18
2h
0.09
785
432
400
EVD120EM-D0J0 5 Wire Loop & Continuity plate 1 x 18
2h
0.09
785
432
400
6.5
EVD140EM-00J0
1 x 36
2h
0.17
1370
900
700
8.5
EVD140EM-D0J0 5 Wire Loop & Continuity plate 1 x 36
2h
0.17
1370
900
700
8.5
EVD220EM-00J0
2 x 18
2h
0.17
785
432
400
7.5
EVD220EM-D0J0 5 Wire Loop & Continuity plate 2 x 18
2h
0.17
785
432
400
7.5
EVD240EM-00J0
2 x 36
2h
0.33
1370
900
700
10.5
EVD240EM-D0J0 5 Wire Loop & Continuity plate 2 x 36
2h
0.33
1370
900
700
10.5
Type
EVD120EM-00J0
5 Wire Loop
5 Wire Loop
5 Wire Loop
Dimensions (mm)
B
C
Weight (kg)
6.5
*EVD...EM-.0C0 Automatic switch off on opening (to complete with wiring configuration)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Standard: dual tube electronic ballast
AC/DC 220-240V, 50-60Hz
Battery
Ni-Cd 7.2V 4Ah
Lumen level in emergency mode (1 tube lit):
40% at 18W, 33% at 36W
Battery duration in emenrgency mode: 2 hours
Battery charge monitored by one LED
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the emergency
tube is lit and the battery does not recharge), or in
non-maintained mode (when the main supply is
connected: the tubes are not lit, the battery charges /
when the main supply is off: the emergency tube is
lit and the battery does not recharge)
Power factor
Up to 0.98
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Terminals supplied for N, PE, L1, L2, L3, LS
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
EMA version available upon request
(with automatic test) - similar to EVS-EMA
Spares & Fixings Accessories see pages 90-95
Related Products
65
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
ESB-EM Range
Recessed emergency fluorescent fitting
Approvals / Characteristics
Features
• Main body made from powder coated steel
• 6mm toughened glass making it perfect
for laboratories
• Automatic switch off upon opening
for safe maintenance
• Battery duration 2 hours
• Including accessories (cable gland)
Certification & Standards
Approved to: EN60079-0, 60079-1, 60079-7
EC TYPE Examination Certificate: Under 94/9/EC
INERIS II ATEX 0058X
Ex II 2 G
Ex de IIC T4 Gb for ≤ -40ºC to ≤ +60ºC
Glow wire test: 850°C EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
66
www.tnb-hazardous.com
Ex Emergency lighting - ESB-EM Range
Technical Specifications
Dimensions
240
240
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
Glass
A
ESB240EM-0000
5 Wire Loop
2 x 36
2h
0.33
Toughened
1364
1312
105
22
ESB240EM-A000
5 Wire Loop
2 x 36
2h
0.33
Frosted
1364
1312
105
22
Type
Enclosure
Steel housing and body painted in white polyester
powderpaint RAL 9016
6mm clear toughened glass panel (optional frosted
low lumen output)
Neoprene gasket
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Standard: electronic ballast:
AC/DC 220-240V, 50-60Hz
Battery
Ni-Cd 7.2V 4Ah battery in flameproof case
Lumen level in emergency mode (1 tube lit): 33%
Emergency load duration: 2 hours
Battery change monitored by LED
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the emergency
tube is lit and the battery does not recharge), or in
non-maintained mode (when the main supply is
connected: the tubes are not lit, the battery charges /
when the main supply is off: the emergency tube is
lit and the battery does not recharge)
Power factor
Up to 0.98
Cable entries
Standard: Two M20 cable entries included
One M20 Nylon plug (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
Dimensions (mm)
B
C
Weight (kg)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Terminals supplied N, PE, L1, 1, 2
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Fixing
Fixing by 4 M6 threaded bolts (not supplied) joined
to the main body
Spares & Fixings Accessories see pages 90-95
Related Products
67
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
Industrial Lighting Non-Hazardous locations
68
26
www.tnb-hazardous.com
Industrial Lighting - Non-Hazardous Locations
69
www.tnb.com
A Member of the ABB Group
FF Range
Weatherproof tubular fluorescent fitting
Approvals / Characteristics
Features
• Ingress protection IP66 ideal for wash down areas
• All components mounted on a removable gear tray which
gives easy access for installation and maintenance
• Tubular shape to avoid waste accumulation
• Including accessories (cable gland & fixing brackets)
Technical Data
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP66 IEC 60529 (2001)
70
www.tnb-hazardous.com
Industrial Lighting - FF Range
Technical Specifications
Dimensions
Wiring
Configuration
Diffuser
Nominal
Rating (W)
Current (A)
FR120-0G000
5 Wire
Polycarbonate
1 x 18
0.15
780
565
4
FR136-0G000
5 Wire
Polycarbonate
2 x PL36
0.2
780
565
4.5
FR140-0G000
5 Wire
Polycarbonate
1 x 36
0.2
1385
1170
7
FR155-0G000
5 Wire
Polycarbonate
1 x PL55
0.35
780
565
4.5
FR165-0G000
5 Wire
Polycarbonate
1 x 58
0.35
1690
1475
8
FF220-0G000
5 Wire
Polycarbonate
2 x 18
0.3
780
565
4.5
FF236-0G000
5 Wire
Polycarbonate
2 x PL36
0.4
780
565
5
FF240-0G000
5 Wire
Polycarbonate
2 x 36
0.4
1385
1170
7
FF255-0G000
5 Wire
Polycarbonate
2 x PL55
0.7
780
565
5
FF265-0G000
5 Wire
Polycarbonate
2 x 58
0.7
1690
1475
9
Type
Enclosure
Reinforced black polycarbonate end caps
UV protected extruded polycarbonate tube,
thickness 2.5mm
Temperature
Ambient temperature: -20°C to +50°C
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
brackets for ceiling mounting
Rated voltages
Electronic ballast: AC/DC 110-260V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: Two M20 entries included
One plug (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
Dimensions (mm)
A
B
Weight (kg)
Terminal block (plug in terminal block)
Up to 10mm2 (rigid wire), 6mm2 (flexible wire)
Standard: terminals supplied for L1, L2, L3, N, PE
Looping possible with additional cable gland
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
G11 compact fluorescent PL lamp
Spares & Fixings Accessories see pages 90-95
Related Products
71
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EL Range
Weatherproof miniature tubular fluorescent fitting
Approvals / Characteristics
Features
• Small and compact for confined spaces
• Ingress protection IP66 ideal for wash down areas
• All components mounted on a removable gear tray which
gives easy access for installation and maintenance
• Tubular shape to avoid waste accumulation
• Including accessories (cable gland & fixing brackets)
Technical Data
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP66 IEC 60529 (2001)
72
www.tnb-hazardous.com
Industrial Lighting - EL Range
Technical Specifications
Dimensions
Wiring
Configuration
Diffuser
Nominal
Rating (W)
Current (A)
EL3008-0G000
5 Wire
Polycarbonate
1x8
0.1
455
240
EL3009-0G000
5 Wire
Polycarbonate
1 x PL9
0.1
455
240
3
EL30011-0G000
5 Wire
Polycarbonate
1 x PL11
0.1
455
240
3.5
3.5
Type
Dimensions (mm)
A
B
Weight (kg)
3
EL120-0G000
5 Wire
Polycarbonate
1 x PL18
0.3
455
240
EL220-0G000
5 Wire
Polycarbonate
2 x PL18
0.5
455
240
4
EL30028-0G000
5 Wire
Polycarbonate
2x8
0.1
455
240
3.5
Enclosure
Reinforced black polycarbonate end caps
LEXAN 2034 UV protected extruded polycarbonate
tube, thickness 2.5mm
Neoprene gasket
Temperature
Ambient temperature: -20°C to +50°C
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
brackets for ceiling mounting
Rated voltages
Standard:
Electronic ballast: AC/DC 220-240V, 50/60Hz
Power factor
Up to 0.98
Cable entries
Standard: Two M20 entries included
One plug (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
Terminal block (plug in terminal block)
Up to 10mm2 (rigid wire), 6mm2 (flexible wire)
Standard terminals supplied for L1,L2,L3, N, PE
Looping possible with additional cable glands
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
G11 compact fluorescent PL lamp
Lamp with G11 base (18W)
or G23 (7W, 9W, 11W)
Spares & Fixings Accessories see pages 90-95
Related Products
73
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
SF / QF / EF Range
Weatherproof floodlight fitting
Approvals / Characteristics
Features
• Compact, lightweight and robust ideal for lighting
large areas
• Integral junction box: rapid installation
• Excellent photometric properties, wide or narrow beam
• Including accessories (cable gland & lamps installed)
• Supplied with offshore grade paint
Technical Data
IP test: IP66 IEC 60529 (2001)
74
www.tnb-hazardous.com
Industrial Lighting - SF / QF / EF Range
Technical Specifications
Dimensions
Standard Flat
Pole Mounting
Nominal
Rating (W)
Current (A)
Mounting
Weight (kg)
SF70P-00000
1 x 70 HP Sodium
0.4
Flat
17
SF70G-00000
1 x 70 HP Sodium
0.4
Pole
17
SF150P-00000
1 x 150 HP Sodium
0.8
Flat
17
SF150G-00000
1 x 150 HP Sodium
0.8
Pole
17
SF250P-00000
1 x 250 HP Sodium
1.3
Flat
18
SF250G-00000
1 x 250 HP Sodium
1.3
Pole
18
SF400P-00000
1 x 400 HP Sodium
2.1
Flat
20
SF400G-00000
1 x 400 HP Sodium
2.1
Pole
20
QF250P-00000
1 x 250 Metal Halide
1.3
Flat
18
QF250G-00000
1 x 250 Metal Halide
1.3
Pole
18
QF400P-00000
1 x 400 Metal Halide
2.1
Flat
20
QF400G-00000
1 x 400 Metal Halide
2.1
Pole
20
EF110P-00000
2 x 55 Halogen 12V
9.2
Flat
13
EF110G-00000
2 x 55 Halogen 12V
9.2
Pole
13
EF140P-00000
2 x 70 Halogen 24V
5.8
Flat
13
EF140G-00000
2 x 70 Halogen 24V
5.8
Pole
13
Type*
*Option: ...F... -0A000 (to complete with nominal rating & mounting) - Narrow beam, for example: SF400P-0A000
Enclosure
Marine grade aluminium alloy type according to
EN1706:EN AC-AlSi7 Mg 0,6 T6
Cataphoretically treated
12mm toughened glass
Stainless steel screws
Temperature
Ambient temperature: -20°C to +60°C
Rated voltages
Standard: 230V 50Hz ferromagnetic ballast,
with capacitor
Option: 220V 60Hz ferromagnetic ballast
or 120V 60Hz on few models, ferromagnetic
ballast
Power factor
Up to 0.85 for version with compensated ballast
(Sodium HP and metal halide)
Cable entries
Standard: Two M20 entries included
One M20 Nickel Plated Brass plug (EXN/M20/SP)
One cable gland (EXN04MMC2) - Nickel Plated
Brass M20 for non-armoured cable,
diameter 10-16mm
Lamps (Installed)
Polished aluminium reflector
Standard: wide beam
Option: narrow beam
Other options
Sling (SC100 ELINGUE)
Galvanised steel support with base plate (SA103)
Pre wired masthead floodlighting systems: Full system
with 2 or 4 floodlights (to complete with nominal
rating), for example HM 4400 (4 x 400 W HPS)
(See photo on XF Range)
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Terminals supplied: L, N, PE
Fixing
Standard:galvanised steel flat mounting bracket,
Pole mounted: Ø 40 to 60mm
Colour (standard)
SF/QF/EF***-00000 - Yellow offshore, RAL 1003
Colour options
SF/QF/EF***-B0000 - Grey, RAL 7035
SF/QF/EF***-C0000 - Black, RAL 9004
SF/QF/EF***-D0000 - Hammered Blue, RAL 5015
SF/QF/EF***-F0000 - Red, RAL 3001
SF/QF/EF***-G0000 - Blue, RAL 5010
SF/QF/EF***-J0000 - Green, RAL 6032
SF/QF/EF***-M0000 - White, RAL 9010
•
•
•
•
•
•
•
Spares & Fixings Accessories see pages 90-95
Related Products
75
EXB Conduit 138
Stopping Plugs 174
XB100 Range 104
Ex e Cable
Gland
166
www.tnb.com
A Member of the ABB Group
EVT Range
Weatherproof fluorescent fitting with diffuser
Approvals / Characteristics
Features
• Double central locking for ingress protection
• Including accessories (cable gland & fixing brackets)
• Option: automatic switch off on opening
Technical Data
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP66 IEC 60529 (2001)
76
www.tnb-hazardous.com
Industrial Lighting - EVT Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Nominal
Current (A)
A
EVT120-A0J0
5 Wire Loop
1 x 18
0.09
785
432
400
4.2
EVT120-D0J0
5 Wire Loop & Continuity plate
1 x 18
0.09
785
432
400
4.2
EVT140-A0J0
5 Wire Loop
1 x 36
0.17
1370
900
700
6.5
EVT140-D0J0
5 Wire Loop & Continuity plate
1 x 36
0.17
1370
900
700
6.5
EVT165-A0J0
5 Wire Loop
1 x 58
0.26
1670
900
700
8
EVT165-D0J0
5 Wire Loop & Continuity plate
1 x 58
0.26
1670
900
700
8
EVT220-A0J0
5 Wire Loop
2 x 18
0.17
785
432
400
4.5
EVT220-D0J0
5 Wire Loop & Continuity plate
2 x 18
0.17
785
432
400
4.5
EVT240-A0J0
5 Wire Loop
2 x 36
0.33
1370
900
700
6
EVT240-D0J0
5 Wire Loop & Continuity plate
2 x 36
0.33
1370
900
700
6
EVT265-A0J0
5 Wire Loop
2 x 58
0.5
1670
900
700
8.5
EVT265-D0J0
5 Wire Loop & Continuity plate
2 x 58
0.5
1670
900
700
8.5
Type*
Dimensions (mm)
B
C
Weight (kg)
*(Through options) Define type rating (to complete with rating): EVT...-B0J0 5 Wires through, EVT...-E0J0 with two continuity plates,
EVT...-.0C0 Automatic switch off on opening (to complete with wire configuration)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Temperature
Ambient temperature: -20ºC to +50ºC
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
Rated voltages
Standard electronic ballast:
AC/DC 110-260V , 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plug (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm (1 or 2 according to
number of plates)
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Standard: Terminals supplied for L1, L2, L3, N, PE
Looping possible with additional cable glands
5 wire through option I MAX =16A max
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - cool white 4000°K
Spares & Fixings Accessories see pages 90-95
Related Products
77
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EST Range
Weatherproof recessed fluorescent fitting
Approvals / Characteristics
Features
• Fitting combines photometric qualities, strength
and design
• Including accessories (cable gland)
Technical Data
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -20°C to +50ºC
IP test: IP64 IEC 60529 (2001)
78
www.tnb-hazardous.com
Industrial Lighting - EST Range
Technical Specifications
Dimensions
240
240
Wiring
Configuration
Rating (W)
Glass
Nominal
Current (A)
A
EST220-00J0
5 Wire Loop
2 x 18
Toughened
0.17
753
702
105
12.5
EST220-A0J0
5 Wire Loop
2 x 18
Frosted
0.17
753
702
105
12.5
EST240-00J0
5 Wire Loop
2 x 36
Toughened
0.33
1364
1312
105
20
EST240-A0J0
5 Wire Loop
2 x 36
Frosted
0.33
1364
1312
105
20
EST265-00J0
5 Wire Loop
2 x 58
Toughened
0.5
1664
1612
105
25
EST265-A0J0
5 Wire Loop
2 x 58
Frosted
0.5
1664
1612
105
25
Type
Enclosure
Steel housing and body painted in white polyester
powder paint RAL 9016 (stainless steel 304L on
request)
6mm clear toughened glass panel (optional frosted
low lumen output)
Temperature
Operating temperature range: -20°C to +40°C
Rated voltages
Standard: electronic ballast
AC/DC 110-260V, 50-60Hz
Power factor
Up to 0.98
Cable entries
Standard: Two M20 cable entries included
One M20 Nylon plug (EX-M20)
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
Dimensions (mm)
B
C
Weight (kg)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Terminals supplied L1, L2, L3, N, PE
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Fixing
Fixing by 4 M6 threaded bolts (not supplied) joined
to the main body
Spares & Fixings Accessories see pages 90-95
Related Products
79
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
FB / FL Range
Weatherproof warning lights and beacons
Approvals / Characteristics
Features
• Lightweight and robust for easy installation
• Static or flashing versions available for use in a
variety of applications
• Choice of 5 colours of globe
• 2 or 3 light versions available for traffic signals
• Including accessories (cable gland, plug & lamp installed)
Technical Data
IP test: IP66 IEC 60529 (2001)
80
www.tnb-hazardous.com
Industrial Lighting - FB / FL Range
Technical Specifications
8
Dimensions
Contact Sales for Mounting Options
Type
Rating (W)
Lamp
Standard Globe*
Version
Rated Voltages
FB30-00000
1 x 28
E27
Red
Halogen
AC 230V 50/60Hz
Weight (kg)
3.5
FB70-00000
1x8
E27
Red
LED
AC 100-240V 50/60Hz
3.5
FL30P-00000
30 Joules
Picots
Red
Xenon flash
AC 230V 50/60Hz
4
FL30P-0C000
30 Joules
Picots
Red
Xenon flash
AC 100V 50/60Hz
4
FL30P-0D000
30 Joules
Picots
Red
Xenon flash
DC 24V
4
FL30P-0E000
30 Joules
Picots
Red
Xenon flash
DC 48V
4
FL30P-0F000
30 Joules
Picots
Red
Xenon flash
DC 110V
4
*Choice of globe colours: XF...-00000 - Red, XF...-000A0 - Transparent globe, XF...-000B0 - Green globe, XF...-000C0 - Orange globe, XF...-000D0 - Blue globe
**For colour combinations: Colour combination: please contact Sales for more information
Enclosure
Marine grade aluminium alloy type
EN1706 AC-43100KF-AlSi 10Mg
Aluminium reflector
Temperature
Ambient temperature: -20°C to +60°C
Cable entries
Standard: Two entries M20 included
One M20 nickel plated brass plug (EXN/M20/SP) and
one cable gland (EXN04MMC2) - Nickel Plated Brass
ISO M20 for non-armoured cable, diameter 10-16mm
Terminal block
Up to 6mm2
Terminals supplied for L, N, PE
Lamps (supplied)
For xenon flash versions
Flashing rate: 45 to 60 - per minute
Globe
Polycarbonate, thickness 3mm
Colour (standard)
FB/FL***-00000 - Yellow offshore, RAL 1003
•Colour
options
- Grey, RAL 7035
• FB/FL***-B0000
- Black, RAL 9004
• FB/FL***-C0000
- Hammered Blue, RAL 5015
• FB/FL***-D0000
FB/FL***-F0000
RAL 3001
• FB/FL***-G0000 -- Red,
RAL 5010
• FB/FL***-J0000 - Blue,
RAL 6032
• FB/FL***-M0000 - Green,
White, RAL 9010
Spares & Fixings Accessories see pages 90-95
Related Products
81
EXB Conduit 138
Stopping Plugs 176
XB100 Range 104
Ex e Cable
Gland
166
www.tnb.com
A Member of the ABB Group
HF Range
Portable floodlight
Approvals / Characteristics
Features
• Lightweight and robust
• Free standing on base plate for stable use
in high winds
• Fully portable with carrying handle
• Including accessories (cable gland & lamp installed)
Technical Data
IP test: IP66 IEC 60529 (2001)
82
www.tnb-hazardous.com
Industrial Lighting - HF Range
Technical Specifications
Dimensions
Rating (W)
Lamp
Power Supply (V)
Nominal
Current (A)
Weight (kg)
HF55P-00000
55
Halogen H3
12
4.6
6
HF70P-00000
70
Halogen H3
24
2.9
6
Type
Enclosure
Marine grade aluminium alloy
Globe: 3mm thick transparent polycarbonate
Temperature
Ambient temperature: -20°C to +60°C
Cable entries
One M20 entry included
One cable gland (EXN04MMC2) - ISO M20 Nickel
Plated Brass for non-armoured cable,
diameter 10-16mm
Terminal block
Up to 6mm2
Terminals supplied L, N, PE
Lamps (supplied)
70W - 24V iodine lamp - H3 lampholder
55W - 12V iodine lamp - H3 lampholder
Fixing (including)
Galvanised steel support with base plate ref. SA103
Spares & Fixings Accessories see pages 90-95
Related Products
83
EXL Conduit 148
Stopping Plugs 176
GUV Range
120
Ex e Cable
Gland
166
www.tnb.com
A Member of the ABB Group
FR-EM / FF-EM Range
Emergency weatherproof tubular fluorescent fitting
Approvals / Characteristics
Features
• Ingress protection IP66 ideal for wash down areas
• All components mounted on removable gear tray which
gives easy access for installation and maintenance
• Battery 2h duration
• Tubular shape to avoid waste accumulation
• Including accessories, cable gland & fixing brackets
Technical Data
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -20°C to +40ºC
84
www.tnb-hazardous.com
Industrial Emergency Lighting - FR-EM / FF-EM Range
Technical Specifications
Dimensions
Wiring
Configuration
Diffuser
Rating (W)
Nominal
Current (A)
Battery
FR120EM-0G000
3 Wire
Polycarbonate
1 x 18
0.15
2h
780
565
FR140EM-0G000
3 Wire
Polycarbonate
1 x 36
0.2
2h
1385
1170
8
FF220EM-0G000
3 Wire
Polycarbonate
2 x 18
0.2
2h
780
565
5.5
FF240EM-0G000
3 Wire
Polycarbonate
2 x 36
0.35
2h
1385
1170
8
Type
Enclosure
Reinforced black polycarbonate end caps
UV protected extruded polycarbonate tube,
thickness 2.5mm
Temperature
Ambient temperature: -10°C to +40°C
Fixing
Standard: D023 - 2 Zinc Plated Steel articulated
brackets for ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Power Factor
Up to 0.98
Rated voltages
Electronic ballast: AC/DC 220-240V, 50-60Hz
Battery
Ni-Cd battery 7.2V, 4Ah
Lumen output in emergency mode (1 tube lit):
40% for 8W, 33% for 36W
Battery duration in emergency mode: 2 hours
Monitored by one LED
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the emergency
tube is lit and the battery does not recharge), or in
non-maintained mode (when the main supply is
connected: the tubes are not lit, the battery charges /
when the main supply is off: the emergency tube is
lit and the battery does not recharge)
Cable entries
Standard: Two M20 entries included
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
One Nylon plug (EXM20)
Dimensions (mm)
A
B
Weight (kg)
5
Terminal block (plug in terminal block)
Terminals supplied: L1,2,N, PE
Up to 10mm2 (rigid wire), 6mm2 (flexible wire)
Standard: terminals supplied for L1, 2, N, PE
Looping possible with additional cable gland
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
Spares & Fixings Accessories see pages 90-95
Related Products
85
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EVT-EM Range
Emergency weatherproof fluorescent fitting with diffuser
Approvals / Characteristics
Features
• Double central locking for ingress protection
• Battery duration 2 hours
• Included accessories (cable gland & fixing brackets)
• Option: automatic switch off on opening
Technical Data
Glow wire test: 960°C EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
86
www.tnb-hazardous.com
Industrial Emergency Lighting - EVT-EM Range
Technical Specifications
Dimensions
2 M8 holes
Depth 20
170
137
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
A
EVT120EM-00J0
5 Wire
1 x 18
2h
0.09
785
432
400
6.5
EVT120EM-D0J0
5 Wire & Continuity plate
1 x 18
2h
0.09
785
432
400
6.5
EVT140EM-00J0
5 Wire
1 x 36
2h
0.17
1370
900
700
8.5
EVT140EM-D0J0
5 Wire & Continuity plate
1 x 36
2h
0.17
1370
900
700
8.5
EVT220EM-00J0
5 Wire
2 x 18
2h
0.17
785
432
400
7.5
EVT220EM-D0J0
5 Wire & Continuity plate
2 x 18
2h
0.17
785
432
400
7.5
EVT240EM-00J0
5 Wire
2 x 36
2h
0.33
1370
900
700
10.5
EVT240EM-D0J0
5 Wire & Continuity plate
2 x 36
2h
0.33
1370
900
700
10.5
Type*
Dimensions (mm)
B
C
Weight (kg)
*(Through options) EVT...-.0C0 Automatic switch off on opening (to complete with wire configuration)
Enclosure
Fiberglass reinforced polyester body
Polycarbonate diffuser, treated against UV
Temperature
Ambient temperature: -10ºC to +40ºC
Fixing
Standard: V015 - 2 Zinc Plated Steel brackets for
ceiling mounting
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Electronic ballast: AC/DC 220-240V, 50-60Hz
Battery
Ni-Cd 7.2V 4Ah
Lumen level in emergency mode (1 tube lit):
40% for 18W, 33% for 36W
Battery duration in emergency mode:
2 hours
Battery charge monitored by LED
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the emergency
tube is lit and the battery does not recharge), or in
non-maintained mode (when the main supply is
connected: the tubes are not lit, the battery charges /
when the main supply is off: the emergency tube is
lit and the battery does not recharge)
Power factor
Up to 0.98 with electronic ballast
Cable entries
Standard: Three M20 cable entries included
Two M20 Nylon plugs (EX-M20)
One cable gland (EXCGM20S) - M20 Nylon for
non-armoured cable, diameter 6-12mm
For armoured cable - continuity plate option:
Nickel Plated Brass cable gland (EXN04MMC1),
diameter 6-12 / 8.5-16mm (1 or 2 according to
number of plates)
Terminal block (plug in terminal block)
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Terminals supplied : L1, L2, L3, N, PE, LS
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Lamps (order separately)
T8 bi-pin G13 tube, Ø 26 - cool white 4000°K
EMA version available upon request
(with automatic test) - similar to EVS-EMA
Spares & Fixings Accessories see pages 90-95
Related Products
87
EXB Conduit 138
Ex d Cable
Gland
162
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
EST-EM Range
Emergency weatherproof recessed fluorescent fitting
Approvals / Characteristics
Features
• Fitting combines photometric qualities, strength
and design
• Battery duration 2 hours
• Included accessories (cable gland)
Technical Data
Glow wire test: 850°C EN60598-2-22
Safe operating temperature range: -10°C to +40ºC
IP test: IP66 IEC 60529 (2001)
88
www.tnb-hazardous.com
Industrial Emergency Lighting - EST-EM Range
Technical Specifications
Dimensions
240
240
Wiring
Configuration
Rating (W)
Battery
Nominal
Current (A)
Glass
A
EST240EM-00J0
5 Wire
2 x 36
2h
0.33
Toughened
1364
1312
105
22
EST240EM-A0J0
5 Wire
2 x 36
2h
0.33
Frosted
1364
1312
105
22
Type
Enclosure
Steel housing and body painted in white polyester
powder paint RAL 9016
6mm clear toughened glass panel (optional frosted
low lumen output)
Temperature
Operating temperature range:
-10°C to +40°C
For wiring, please refer to the instruction
manual (drawings)
Technical assistance on request
Rated voltages
Electronic ballast:
Standard: AC/DC 220-240V, 50-60Hz
Battery
Ni-Cd 7.2V 4Ah
Lumen level in emergency mode (1 tube lit): 33%
Emergency load duration: 2 hours
Battery charge monitored by LED
Operating in maintained mode (when the main
supply is connected: the tubes are lit, the battery
charges / when the main supply is off: the emergency
tube is lit and the battery does not recharge), or in
non-maintained mode (when the main supply is
connected: the tubes are not lit, the battery charges /
when the main supply is off: the emergency tube is
lit and the battery does not recharge)
Power factor
Up to 0.98
Cable entries
Standard: Two M20 cable entries included
One M20 Nylon plug and
One cable gland (EXCGM20S) - ISO M20 Nylon for
non-armoured cable, diameter 6-12mm
One Nylon plug (EX-M20)
Dimensions (mm)
B
C
Weight (kg)
Terminal block
Up to 4mm² (rigid wire), 2.5mm² (flexible wire)
Terminals for L, N, PE terminal 1 and terminal 2
Select function: Lighting in maintained mode or
lighting in non-maintained mode
Lamps (order separately)
Tube G13 bi-pin T8 Ø 26 coolwhite 4000°k
Spares & Fixings Accessories see pages 90-95
Related Products
89
EXB Conduit 138
Nylon Stopping
Plugs
176
XB100 Range 104
Exe Nylon Gland 168
www.tnb.com
A Member of the ABB Group
Fixing Accessories
Fixing Accessories for DTS lighting fittings
Fixing Accessories for EV Fluorescent Light Fitting Range
100
fl 36
fl 20
2
25
41
ø9
fl 9
2 x fl 9
20
M8
18
100
70
30
60¡
maxi
α
M8
~70
30
Hinged bracket
V023: plastic coated
Hook
V024: zinc plated steel
Fixing bracket and flange for
ø 1”1/4 and 1”1/2
V018: zinc plated steel (V019 - 2”)
V021: stainless steel 316L (V022 - 2”)
2 oblong holes
18x9
ø9
25
160
200
60
,
2 Ø 8.5
25
Brackets
Standard V015: zinc plated steel
V016: stainless steel 316L
Mounting bracket clip
V014: stainless steel
55
R
Fixing Accessories for Tubular Fitting: XFF / XFR / XFP / XEL / XEP / XFF-EM / XFP-EM / FF / FR / EL / FF-EM Range
Ø8
Ø 11
35
35
35
U-bolt for pole mounting
for 1”1/4
D025: zinc plated steel
(D026 - 1”1/2)
(D027 - 2”)
90
www.tnb-hazardous.com
2 Ø 11
3
35
3
Bracket
Standard D023: zinc plated steel
D024: stainless steel 304L
Accessories & Spare Parts
Spare Parts
Spare Parts for DTS lighting fittings
Spare Parts for EVS / EVN / EVD / EVN / EVT Fluorescent Light Fitting Range
V001
V005
V004
V008
EVS-EM/EMA Range
EVN / EVD / EVT-EM/EMA Range
Type
Specifications
Type
V001
Transparent diffuser (included gasket)*
V001
Transparent diffuser (included gasket)*
V004
Complete gear tray*
V004
Complete gear tray*
V005S
Connection Pack: Switch,
Connector, Terminal
V005E
Switch*
V008N
Bi-pin Lampholder
V008
Bi-pin Lampholder
V011
Battery pack*
002
Specifications
*Define type, rating and operating voltage
Spare Parts for ES Recessed Fluorescent Light Fitting Range
ESB / ESB-EM Range
Type
Specifications
Z001
Tranparent frame*
Z007
Electronic Ballast*
V008
Lampholder
V011
Battery Pack*
EST / EST-EM Range
Type
Specifications
Z001
Tranparent frame*
Z007N
Electronic Ballast*
V008N
Lampholder
Z007
V008
Z001
91
*Define type, rating and operating voltage
www.tnb.com
A Member of the ABB Group
Spare Parts
Spare Parts for DTS lighting fittings
Spare Parts for XFF / XFR Tubular Light Fitting Range
D001
D005
D002
D010
D010
XFF / XFR Range
Type
Specifications
D001
Sealed tube, cover, gasket, chain and slides*
D002
Cover, chain, gasket
D005
Complete gear tray* (included FF/FR Range)
D010
Bi-pin Lampholder
4GRA00002S
Grease for tubular model
*Define type, rating and operating voltage
Spare Parts for XFP Tubular Light Fitting Range
D021C
D005
D002
D010
D010
XFP Range
92
Type
Specifications
D001
Sealed tube, cover, gasket, chain and slides*
D002
Cover, chain, gasket
D005
Complete gear tray*
D010
Bi-pin Lampholder
D021C
Cover, gasket, screw, terminals, switch of junction boxes
D022
Interlock
4GRA00002S
Grease for tubular model
*Define type, rating and operating voltage
www.tnb-hazardous.com
D022
D001
Accessories & Spare Parts
Spare Parts
Spare Parts for DTS lighting fittings
Spare Parts for XEL / XEP Miniature Tubular Light Fitting Range
B002
B001
XEP
M005
D002
D002
XEL
D021C
D010
XEL Range
XEP Range
Type
Specifications
Type
Specifications
B001
Sealed tube, cover, gasket, chain and slides*
B002
Sealed tube, cover, gasket, chain and slides*
D002
Cover, chain, gasket
D002
Cover, chain, gasket
M005
Complete gear tray* (included EL Range)
M005
Complete gear tray*
D010
Bi-pin Lampholder*
D010
Bi-pin Lampholder*
4GRA00002S
Grease for tubular model
D021C
Cover, gasket, screw, terminals, switch and
interlock of junction boxes
D022
Interlock
4GRA00002S
Grease for tubular model
*Define type, rating and operating voltage
Spare Parts for XSF / XQF / XEF / EF / SF / QF Floodlight Range
SC100ELINGUE
P008
P009
XSF / XQF / XEF / SF / QF / EF Range
P006
P002 P004
P001
P012
P017
P007
P030
E007
E008C
P030C
Type
Specifications
P001
Closing Screw (12)
P002
Sealed front glass*
P004
Gasket*
P006
Lamp*
P007
Lampholder
P008
Reflector*
P009
Ferromagnetic Ballast*
P010
Ferromagnetic Ballast 120V 60Hz (400W)
P012
Ignitor
P017FC
Fixing (including screws)
P030C
Boxes Accessories: terminal 2* 6mm²
+ earthing terminal, + cover gasket, + cover, screw
P030
Ex trough connector
E007
Iodine Lamp*
E008C
Gear tray support, + fixing for optic, + optic for XEF
4GRA00001S
Grease for model XSF, XQF,XEF
93
*Define type, rating and operating voltage
www.tnb.com
A Member of the ABB Group
Spare Parts
Spare Parts for DTS lighting fittings
Spare Parts for XFF-EM / XFP-EM Tubular Light Fitting Range
D001
D005
D002EM
XFF-EM
D001
D021C
D016
D010
D022
D010
XFP-EM
XFF-EM Range
XFP-EM Range
Type
Specifications
Type
Specifications
D001
Sealed tube, cover, gasket, chain and slides*
D001
Sealed tube, cover, gasket, chain and slides*
D002EM
Cover, chain, gasket
D002EM
Cover, chain, gasket
D005
Complete gear tray*
D005
Complete gear tray*
D010
Bi-pin Lampholder
D010
Bi-pin Lampholder
D016
Battery pack
D016
Battery pack
4GRA00002S
Grease for tubular model
D021C
Cover, gasket, screw, terminals, switch an
interlock of junction boxes
D022
Interlock
4GRA00002S
Grease for tubular model
*Define type, rating and operating voltage
Spare Parts for XEL-BAES Range - XEL / XEP
B002
B001
XEP
B008
B009
B004
D002EM
D002
D021C
XEL
B00”
B01”
XEL- A / AK / AI / SI Range
B010B
Gear tray - 230V 50Hz - XEL 80AK / XEL80AI
Type
Specifications
B013K
Gear tray - 230V 50Hz - XEL 300AK / XEL300AI
B001
Sealed tube, cover, gasket, chain and slides*
B013
Gear tray - 230V 50Hz - XEL 300A
D002EM
Cover, chain, gasket
B014B
Gear tray - 230V 50Hz - XEL 80SI
B004
Slide for gear tray - XEL / XEP / XEL-BAES
B015
Gear tray - 230V 50Hz - XEL 300SI
B008B
Battery XEL 80A
4GRA00002S
Grease for tubular model
B008C
Battery + XIN05 XEL80AK / XEL80AI / XEL80SI
B009A
Battery + XIN05 XEL300AK / XEL300AI / XEL300SI
XEL - AI / SI Range (ONLY)
B009
Battery XEL3001 / XEL300A
Type
B005B
Gear tray - 230V 50Hz - XEL 80A
B002
Sealed tube, cover, gasket, chain and slides*
B006L
Gear tray - 230V 50/60Hz - XEL 3001
D021C
B007
Gear tray - 230V 50/60Hz - XEL 3002
Cover, gasket, screw, terminals, switch and
interlock of junction boxes
D022
Interlock
94
*Define type, rating and operating voltage
www.tnb-hazardous.com
Specifications
Accessories & Spare Parts
Spare Parts
Spare Parts for DTS lighting fittings
Spare Parts for XFB / XFL / FB / FL Beacons Range
L002A
L003A
L002A
L003A
L003A
L021
XFB / FB Range
L023
L021
L022
Type
Specifications
L00*
Globe (included gasket L023)
L021
Lamp*
L013
Lampholder
XFL / FL Range
L021
Type
Specifications
L00*
Globe (included gasket L023)
L021
Lamp*
L022110VCC
Gear tray - 110V DC - for XFL30P / XFL230P / XFL330P / FL30P / FL230P / FL330P
L022110VAC
Gear tray - 110V AC - for XFL30P / XFL230P / XFL330P / FL30P / FL230P / FL330P
L022220VAC
Gear tray - 220 - 230VAC 50-60Hz - for XFL30P / XFL230P / XFL330P / FL30P / FL230P / FL330P
L02224VCC
Gear tray - 24V DC - for XFL30P / XFL230P / XFL330P / FL30P / FL230P / FL330P
L02248VCC
Gear tray - 48V DC - for XFL30P / XFL230P / XFL330P / FL30P / FL230P / FL330P
*Define type, rating and operating voltage
Spare Parts for XDF Range
FF013
FF015C
FF019C
FF026
XFF012
FF02
FF013
FC108
XFF012
FF012
FF005C
XDF Range
Type
SC100ELINGUE
Specifications
FF013
Enclosure (included tube, cover, gasket, screws)*
XFF012
Bi-pin Lampholder
FF005C
Lampholder and starter
FF012
Ferromagnetic ballast*
FF023D
Plug (2P + E) - 10Amp - 250V AC
FF024D
Socket (2P + E) - 10Amp - 250V AC
FF019C
Connecting and earthing terminals
FF015C
Beam clamp with screws and steel brackets
FF026
Extendable cable with socket and plug - (helical cable) expandable to 5 metre max
95
*Define type, rating and operating voltage
www.tnb.com
A Member of the ABB Group
Lamps Guide
Guide to Lamps for use in DTS lighting fittings
Bi-pin T8/T12 fluorescent tubes
Specifications:
Type
G13 - ø 26mm or ø 38mm
TL18W
Power (W) Flux (lm) Cap
18
1250
G13
Fluorescent
Lighting equipment Reference
EVS...
CRI: > 80 - Lm/W: 65 > 93
TL36W
36
3350
G13
Fluorescent
XFR / XFF / XFP...
Colour temperature:
TL58W
58
5200
G13
Fluorescent
EVN...
2700K > 6500K
Fluorescent
EVD...
Average life: 6,000 > 10,000 hours
Weatherproof fluorescent EVT... FR/FF
Standard or electronic ballast
Miniature T5 fluorescent tubes
Specifications:
Type
G5 - ø 15mm
TL8W
Power (W) Flux (lm) Cap
8
430
G5
Lighting equipment Reference
Miniature
XEL / XEP...
CRI: 60 > 85 - Lm/W: 51 > 59
Weatherproof miniature
EL...
Colour temperature:
BAES range
XEL BAES...
2700K > 4100K
Average life: 6,000 hours
Electronic ballast or inverter
Compact fluorescent lamps
Specifications:
Type Power (W) Flux (lm) Cap
Lighting equipment Reference
G23 or G11
PL7W
7
400
G23
Miniature
CRI: 85 > 90 - Lm/W: 57 > 87
PL9W
9
600
G23
Weatherproof miniature
EL...
Colour temperature:
PL11W
11
900
G23
Fluorescent
XFR / XFF / XFP
2700K > 4000K
PL18W
18
1200
2 G11
Average life: 20,000 hours
PL36W
36
2900
2 G11
Standard or electronic ballast,
PL55W
55
4800
2 G11
XEL / XEP...
inverter
LED lamps
Power (W)
Flux (lm)
Cap
Lighting equipment Reference
E27
Specifications:
8
345
E27
Beacon
XFB
CRI: 80 - Lm/W: 55
12
806
E27
Weatherproof beacon
FB
Power (W)
Flux (lm)
Cap
Lighting equipment Reference
CRI: 100 - Lm/W: 10 > 17
28
345
E27
Beacon
Colour temperature:
70
1200
E27
Wellglass
EVX / EVH
2700K
140
3000
E27
Weatherproof beacon
FB
Colour temperature: 3000K
Average life: 25,000 hours
Integral electronic ballast
For lamp type - Contact Sales
Halogen lamps
Specifications:
Average life: 1,000 hours
For lamp type - Contact Sales
96
www.tnb-hazardous.com
XFB
Lamps Guide
Guide to Lamps for use in DTS lighting fittings
High pressure sodium tubular lamps
Specifications:
Type
CRI: NS - Lm/W: 100 > 120
E007
Power (W) Flux (lm) Cap
70
6000
E40
Lighting equipment Reference
Ex d floodlight
XSF...
Colour temperature: 2100K
P006150SHP
150
15000
E40
Weatherproof floodlight
SF...
Average life: 15,000 > 20,000 hours
P006250SHP
250
28000
E40
Mimimum starting temperature: -30ºC
P006400SHP
400
48000
E40
Time to full power: 1 > 10mm
With control gear and ignitor
Metal halide tubular lamps
Specifications:
Type
CRI: 65 - Lm/W: 68 > 76
P006250IM
Power (W) Flux (lm) Cap
250
20000
E40
Lighting equipment Reference
Ex d floodlight
XQF...
Colour temperature:
P006400IM
400
42000
E40
Weatherproof floodlight
QF...
4300K > 4600K
Average life: 3,000 > 6,000 hours
Mimimum starting temperature: -25ºC
Time to full power: 5 > 10mm
With control gear and ignitor
Halogen lamps
Specifications:
Type
H3
S00755W
Power (W) Flux (lm) Cap
55
1350
H3
Lighting equipment Reference
Ex d floodlight
CRI: 100 - Lm/W: 25
S00770W
70
1770
H3
Weatherproof floodlight EF / HF...
XEF / XHF...
Colour temperature:
3000K
Average life: 1,000 hours
Metal halide elliptical lamps
Specifications:
Power (W)
Flux (lm)
Cap
Lighting equipment Reference
CRI: 33 > 49 - Lm/W: 50 > 60
250
12700
E40
Ex d wellglass
Colour temperature:
400
22000
E40
3900K > 4300K
250
12700
E40
Average life: 15,000 > 20,000 hours
400
22000
E40
EVX
Mimimum starting temperature: -25ºC
Time to full power: 5 > 10mm
With control gear
For lamp type - Contact Sales
High pressure sodium elliptical lamps
Power (W)
Flux (lm)
Cap
Lighting equipment Reference
CRI: NS - Lm/W: 80 > 125
Specifications:
70
6300
E27
Ex d wellglass
Colour temperature:
150
17000
E40
2000K > 2200K
250
31100
E40
Average life:
400
55500
E40
EVX / EVH Na...
34,000 hours
Mimimum starting temperature: -25ºC
Time to full power: 1 > 10mm
With control gear and ignitor
For lamp type - Contact Sales
97
www.tnb.com
A Member of the ABB Group
Wellglass
EV Range
EVX / EVH Range
EVH 100 (Halogen)
EVX 100 (Halogen)
EVX Range - Halogen
Type
Dimensions (mm)
Tº Class
Rating (W)
Lamps
Nominal (A)
A/A’
B
EVX100-00000
70
E27 Halogen
0.45
250/283
150
T4
Weight in (kg)
2.9
EVX200-00000
140
E27 Halogen
0.90
313/346
170
T3
3.5
EVX300-00000
250
E27 Mixed light
1.30
410/463
220
T3
7.2
*Suspension ring mounted version, remove X and add the H, e.g. EVH100-00000
EC TYPE Examination Certificate:
IECEx CES 07.0004
CESI 12 ATEX 006
GOST R
II 2 GD
Ex d IIC T...ºC Gb
Ex tb IIIC T...ºC Db IP66
Enclosure
Body in marine grade aluminium alloy
(CU<0.05%) Yellow polyurethane paint RAL1003
Borosilicate glass globe
Galvanised steel protection grill
Ingress rating: IP65 (EN60529), neoprene ingress gasket
Stainless steel screws
Temperature
Ambient temperature range:-20°C to +60°C
Surface temperature classification: T4 to T3 (gas)
98
www.tnb-hazardous.com
Power factor
Up to 0.85 (HP Sodium and metal halide)
Cable entries
EVH: four 3/4” NPT entries - fitted 2 plugs
EVX: four 3/4” NPT entries - fitted 2 plugs
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Lamps
Not supplied (order separately)
Fixing
Ceiling screw M8 (EVX)
Suspension ring (EVH)
Spare part: 30º angle wall mounting arm (R018)
Wellglass
EV Range
EVXNa / EVXlm / EVHNa / EVHlm Range
EVX Na (HP Sodium)
EVH Im (Metal Halide)
Rating (W)
Lamps
Nominal (A)
Dimensions (mm)
A/A’
B
EVXNa20-00000
70
E27 Elliptical
0.40
470/500
200
T4
6.5
EVXNa30-00000
150
E40 Elliptical
0.80
600/633
220
T3
9.7
EVH Na (HP Sodium)
EVXNa Range - HP Sodium
Type
EVX Im (Metal Halide)
TºC Class
Weight in (kg)
EVXNa40-00000
250
E40 Elliptical
1.30
600/633
220
T3
9.7
EVXNa50-00000
400
E40 Elliptical
2.10
630/670
270
T3
12
*Suspension ring mounted version, remove X and add H, e.g. EVHNa20-00000
EVXlm Range - Metal Halide
Type
Dimensions (mm)
B
TºC Class
Rating (W)
Lamps
Nominal (A)
A/A’
EVXlm40-00000
250
E40 Elliptical
1.30
600/633
220
T3
Weight in (kg)
9.7
EVXlm50-00000
400
E40 Elliptical
2.10
630/670
270
T3
12
*Suspension ring mounted version, remove X and add H, e.g. EVHlm40-00000
EC TYPE Examination Certificate:
IECEx CES 07.0004
CESI 12 ATEX 006
GOST R
II 2 GD
Ex d IIC T...ºC Gb
Ex tb IIIC T...ºC Db IP66
Enclosure
Body in marine grade aluminium alloy
(CU<0.05%) Yellow polyurethane paint RAL1003
Borosilicate glass globe
Galvanised steel protection grill
Ingress rating: IP65 (EN60529), neoprene ingress gasket
Stainless steel screws
Temperature
Ambient temperature range:-20°C to +60°C
Surface temperature classification: T4 to T3 (gas)
Rated voltages
HP Sodium metal halide
Standard: 230V 50Hz compensated,
wirewound ballast
Power factor
Up to 0.85 (HP Sodium and metal halide)
Cable entries
EVH: four 3/4” NPT entries - fitted 2 plugs
EVX: four 3/4” NPT entries - fitted 2 plugs
Variants: Other options available on request
Terminal block
Up to 6mm² (rigid wire), 4mm² (flexible wire)
Lamps
Not supplied (order separately)
Fixing
Ceiling screw M8 (EVX)
Suspension ring (EVH)
Spare part: 30º angle wall mounting arm (R018)
99
www.tnb.com
A Member of the ABB Group
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement