Catalogue Sheet: EN Series - NEMA

Catalogue Sheet: EN Series - NEMA
Survive-All™
EN Series
Project/Location:
Contractor:
Date:
NEMA-4X & NSF Certified
Pictogram Sign
FEATURES
• N
EMA-4X Certified
• NSF compliant for food processing
• Polymeric enclosure is fully gasketed around lens and canopy to
secure against water leaks
• S
ealed, heavy-duty, vandal-resistant polycarbonate face plate
• Suitable for cold weather: -40°C for AC/DC and -20°C for
Self-Powered models (option: -CW)
• Tamper-resistant, concealed test switch with magnetic action
• White LED light source
• Supplied standard with two pictogram films per face, for direction
selection
• Meets or exceeds CSA 22.2 No.141-10 standard for pictogram
Exit Signs
• Universal AC input: two-wire 120 to 347VAC; Standard DC input:
two-wire 6 to 24VDC
• Energy efficient – consumes less than 2.5W in AC or DC-remote
mode
• S
elf-Powered models deliver two hours of back-up lighting
NEMA-4X
DIMENSIONS
TYPICAL SPECIFICATIONS
Supply and install the Emergi-Lite® Survive-All™ EN Series pictogram
Exit Signs. The equipment shall be certified for NEMA- 4X and
designed specifically for high abuse areas, wet locations, and cold
weather applications. The equipment frame shall be of industrial
grade polyvinyl chloride with a gasket around lenses and canopy.
The faceplate(s) shall be constructed of heavy-duty vandal-resistant
polycarbonate and feature an even illuminated legend. Each face plate
shall come standard with two legend films for pictogram and direction
selection. The light source shall be white light-emitting diodes (LED).
The pictogram Exit Sign shall operate with universal 2-wire AC input
voltage of 120 to 347VAC at less than 2.5W and universal 2-wire DC
input voltage from 6 to 24VDC at less than 1W for single and double
face signs. The Self-Powered model shall include a concealed green
pilot light and magnet-sensitive test switch, shall use a sealed
Nickel-Cadmium battery of 2.4V nominal voltage and shall stay
illuminated during emergency operation for at least two hours upon
AC failure. When specified, the Self-Powered model shall include
auto-test functions: it shall execute automatic tests for 5 minutes every
30 days, 30 minutes every 60 days and two hours annually. When a fault
is detected, the bi-colour pilot light shall turn from green to red and
flash following a particular code. The code description shall be visible
on a label next to the pilot light to identify the failure type: battery,
charger circuitry, or LED lamps.
The pictogram Exit Sign shall be listed CSA 22.2 No.141-10 standard.
Dimensions are approximate and subject to change.
The equipment shall be Emergi-Lite® Model:
< PICTOGRAM
LEFT FROM HERE
14” [35.7 cm]
131/4” [33.6 cm]
POWER CONSUMPTION AND UNIT RATING
MODEL
31/2” [8.7 cm]
37/8” [9.9 cm]
91/4” [23.4 cm]
PICTOGRAM >
RIGHT FROM HERE
DOUBLE FACE
AC/DC standard
AC/Special DC
SINGLE FACE
SURVIVE-ALL™ NEMA 4X & NSF CERTIFIED FAMILY
P. 64
LPEX600
LPEX600-N
SERIES
SERIES
P. 63
P. 65
NXM SERIES
P.120-121
EF39 & EF39P
EN= NEMA-4X
& NSF
pictogram
exit sign
FACES/ MOUNTING
120VAC
Self-Powered
120 to
347VAC
Auto test
120 / 347VAC
DC SPECS
Less than
2.5W
Less than
2.5W
Less than
2.5W
Less than
2.5W
Less than
3W
Nickel-Cadmium
battery
Less than
1W
Less than
2.5W
Less than
2.5W
Min. 2
hours
Less than
3.5W
Nickel-Cadmium
battery
Min. 2
hours
6 to 24VDC
36, 48, 120VDC
120VDC
-
WIRE GUARDS
SERIES
460.0079-E
P.148-149
460.0027-E
End mount
460.0028-E
Ceiling mount
COLOUR
1= single face universal B= black
mounting
W= f actory
2= double face
white
universal mounting
120 to
347VAC
120 to
347VAC
120 to
347VAC
Two-wire 120V
AC/DC
ORDERING INFORMATION
SERIES
AC SPECS
AC-only
PICTOGRAM
STRAIGHT FROM
HERE
ENC SERIES
Prepared by:
VOLTAGE
I= self-powered, 120 to 347VAC
ID= self-powered diagnostic NiCad, 120 to 347VAC
ID2= self-powered diagnostic NiCad, 120 to 277VAC
U= universal, 120 to 347VAC; 6 to 24VDC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
EM120-2W= 2-wires 120VAC/VDC
NEX= NEXUS® system interface, 120/347VAC
NEX2= NEXUS® system interface, 120/277VAC
NEXRF= NEXUS® system interface, 120/347VAC
NEXRF2= NEXUS® system interface, 120/277VAC
EXAMPLE: EN1WICW
66
Wall mount
OPTIONS
Blank= no options
CW= cold-weather (-20°C for ID,
ID2 and NEXUS® only)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement