Addonics Technologies SCCHDISA64 User guide

Addonics Technologies SCCHDISA64 User guide
Addonics
T E C H N O L O G I E S
Saturn Cipher Combo
Hard Drive (SCCHD)
For Following Models:
SCCHDSAU64, SCCHDSAU128
SCCHDSASA64, SCCHDSASA128
SCCHDIU64, SCCHDIU128
SCCHDISA64, SCCHDISA128
Users Guide
Revision 1.0
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a
class B digital device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on
and off, the user is encouraged to try and correct the interference by one or
more of the following suggestions.
• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and the receiver
• Connect the equipment to a different power outlet other than the
one where receiver is connected
• Consult a certified television or radio technician
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 1
Contents
FCC Warning................................................................................... 1
Contents............................................................................................ 2
Chapter 1 Saturn Cipher Combo Hard Drive package content ........ 3-4
For SATA hard drive ....................................................... 3
For IDE hard drive ........................................................... 4
Chapter 2 Saturn Cipher key............................................................. 5
Chapter 3 Keeping track of the hard drive ........................................ 6
Chapter 4 Saturn Cipher Drive enclosure....................................... 7-8
Drive enclosure for SATA hard drive ............................... 7
Drive enclosure for IDE hard drive................................... 8
Chapter 5 Installing hard drive into the drive enclosure .................... 9
Chapter 6 Attaching USIB interface cable ...................................... 10
Chapter 7 Saturn IDE Drive Cradle ............................................... 11
Chapter 8 Drive Cradle Installation and using the
Saturn Combo Hard Drive ............................................... 12
Chapter 9 USB Interface Cable Installation .................................... 13
USB 2.0 USIB interface cable ........................................ 13
eSATA Interface Cable .................................................. 14
Technical Support & Contact Information.................................... …15
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 2
Chapter 1
Saturn Cipher Combo Hard Drive
Package Content
For SATA hard drive
Models
SCCHDSAU64
SCCHDSAU128
SCCHDSASA64
SCCHDSASA128
Contents
Saturn Cipher SATA drive enclosure 64-bit (SCSAUSCS64)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 64-bit, 2 pieces (AAENKEY64-2)
eSATA USIB interface cable (AASAC-605E)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
Driver CD, this user guide
Saturn Cipher SATA drive enclosure 128-bit (SCSAUSCS128)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 128-bit, 2 pieces (AAENKEY128-2)
eSATA USIB interface cable (AASAC-605E)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
Driver CD, this user guide
Saturn Cipher SATA drive enclosure 64-bit (SCSAUSCS64)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 64-bit, 2 pieces (AAENKEY64-2)
eSATA USIB interface cable (AASAC-605E)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
This user guide
Saturn Cipher SATA drive enclosure 128-bit (SCSAUSCS128)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 128-bit, 2 pieces (AAENKEY128-2)
eSATA USIB interface cable (AASAC-605E)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
This user guide
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 3
Saturn Cipher Combo Hard Drive
Package Content
For IDE hard drive
Models
SCCHDIU64
SCCHDIU128
SCCHDISA64
SCCHDISA128
Contents
Saturn Cipher IDE drive enclosure 64-bit (SCIUSCS64)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 64-bit, 2 pieces (AAENKEY64-2)
USB 2.0 USIB interface cable (AAUSBC-309)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
Driver CD, this user guide
Saturn Cipher IDE drive enclosure 128-bit (SCIUSCS128)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 128-bit, 2 pieces (AAENKEY128-2)
USB 2.0 USIB interface cable (AAUSBC-309)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
Driver CD, this user guide
Saturn Cipher IDE drive enclosure 64-bit (SCIUSCS64)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 64-bit, 2 pieces (AAENKEY64-2)
eSATA USIB interface cable (AASAC-605E)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
This user guide
Saturn Cipher IDE drive enclosure 128-bit (SCIUSCS128)
Saturn IDE drive cradle (AASIDEBY)
Saturn Cipher key 128-bit, 2 pieces (AAENKEY128-2)
eSATA USIB interface cable (AASAC-605E)
110/220V AC/DC 12/5V power adapter (AAPAC12V-US)
This user guide
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 4
Chapter 2
Saturn Cipher key
Check to make sure you have the correct version of Saturn Cipher key. The
key should match the label at the back of the drive enclosure
Yellow label SC-64
stands for Saturn Cipher
64-bit
Green label SC-128
stands for Saturn
Cipher 128-bit
IMPORTANT
There is no back door for the Saturn Cipher encrypted hard drive if the key
is lost or stolen.
To ensure there is a spare key, Your Saturn Cipher bundled kit comes with
one pair of Saturn Cipher keys. These 2 keys have identical encryption code.
One of these keys should be kept in a safe and secure location and can be sent
back to Addonics for duplicating additional keys. If you are down to the last
key, be sure to make a back up of all the data stored inside your encrypted
hard drive prior to sending the last key to Addonics. Addonics is not
responsible for key lost in the mail or retrieval of the data inside the
encrypted hard drive.
Ø The CIPHER key MUST be inserted at the front of the drive
enclosure in order for the drive to be ACTIVATED.
Ø Once the drive is INITIALIZED using the Cipher Key that comes
with the kit, the drive can only be accessed by the original key.
Ø The 2 keys that come with each Saturn bundled kit has their own
unique encryption code. So the keys among different kits are not
interchangeable.
Ø If you have multiple sets of Saturn Cipher kits and would like all the
keys to have the same encryption code, you may make this request at
the time of your order or mail the keys together with master key back
to Addonics to recode them for you. Again be sure that you keep a
spare key with you. Make a back up of your data if you are mailing
in your last key.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 5
Chapter 3
Keeping track of the hard drive
If you are using the Saturn Cipher drive enclosure to encrypted multiple hard
drives. It is important to label your hard drive if you are taking the drive out
of the enclosure. The hard drive with Saturn Cipher encryption will look like
a brand new drive when attach directly to the IDE or SATA controller of a
computer. There will be no partition or any hint to indicate that the drive
contains encrypted data. When the drive is partitioned, all th e encrypted data
will be lost.
The same holds true if a hard drive already has data on it is installed into the
Saturn Cipher drive enclosure. The computer detects the hard drive as a
brand new drive or a drive that is unallocated. Once you proceed to partition
the drive, the data that was on the hard drive will be erased and cannot be
recovered.
A Saturn Cipher encrypted hard drive can be moved to another Saturn Cipher
drive enclosure. But the same key used in encrypting the hard drive must be
used in the new drive enclosure in order to access the drive.
If you are installing multiple Saturn Cipher drive kits into a large
organization, it is important to keep track of the drive and the encryption
key. Once it gets mixed up, there is no possible way to recover the data on
the encrypted hard drive.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 6
Chapter 4
Saturn Cipher Drive Enclosure
Drive enclosure for SATA hard drive
Note: The power switch on the back of the drive MUST be set
to the right to power the hard drive for external use.
Be sure the Saturn cipher key is inserted into the drive enclosure prior to
turning on the power or attaching the USIB interface cable to the
computer. Hard drive will not be detected if the interface cable is
attached to the computer without the Cipher key inserted first. Under
such condition, the power to the drive enclosure will have to be turned off
and turned back on with the Cipher key already inserted into the drive
enclosure in order for the hard drive to be detected by the system.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 7
Drive enclosure for IDE hard drive
Note: The power switch on the back of the drive MUST be set
to the right to power the hard drive for external use.
Be sure the Saturn cipher key is inserted into the drive enclosure prior to
turning on the power or attaching the USIB interface cable to the
computer. Hard drive will not be detected if the interface cable is
attached to the computer without the Cipher key inserted first. Under
such condition, the power to the drive enclosure will have to be turned off
and turned back on with the Cipher key already inserted into the drive
enclosure in order for the hard drive to be detected by the system.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 8
Chapter 5
Installing hard drive into the drive enclosure
Note: Brand New Hard drive must be Partitioned and Formatted first
before a drive letter is assigned by the OS.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide 9
Chapter 6
Attaching USIB interface cable
Be sure the Saturn cipher key is inserted into the drive enclosure prior to
turning on the power or attaching the USIB interface cable to the computer.
Hard drive will not be detected if the interface cable is attached to the
computer without the Cipher key inserted first. Under such condition, the
power to the drive enclosure will have to be turned off and turned back on
with the Cipher key already inserted into the drive enclosure in order for the
hard drive to be detected by the system.
The Saturn Cipher drive enclosure can be used as an internal removable hard
drive or as a drive cartridge by installing the optional drive cradle into the
drive bay of a Desktop, Server or any computing equipment. For more detail
of these options, visit the Saturn Cipher page on Addonics web site
www.addonics.com.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide10
Chapter 7
Saturn IDE Drive cradle
Overview
Drive cradle, also known as fixed tray, is the frame that mounts inside the
drive bay of a Desktop, Server or any computing equipment. The drive cradle
provides both power and data connection between the computer and the drive
enclosure.
The Saturn IDE Drive cradle fits into any standard 5 ¼” drive bay and
connects to the computer via IDE interface. The Saturn IDE drive cradle is
compatible with all Saturn Drive enclosures and Saturn Cipher Drive
enclosures. As a result you can insert SATA or IDE hard drive, encrypted or
unencrypted, into the same drive cradle of a computer.
Building a hot swap drive bay
You can change the IDE connection of the drive cradle to USB 2.0 or SATA
by attaching an Addonics IO converter – IDE-USB, IDE-SATA, or the IDEUSIB connector board to the 40-pin IDE connector on back of the drive
cradle. When the power input of these IO converters is connected to the
unique power sensing connector on the back of the Saturn IDE drive cradle,
you can have hot swap capability of the hard drives, just like using a tape
cartridge system, without shutting down the computer.
To learn about the full family of Addonics IO converters, please visit
www.addonics.com/product/io/
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide11
Chapter 8
Drive Cradle installation and using the Saturn
Combo Hard Drive
Insert the IDE drive cradle into a standard 5 ¼” drive bay of a computer
and secure the drive cradle to the drive bay with 4 screws (already
included with the drive cradle), 2 on each side of the drive bay.
Be sure the Saturn cipher key is inserted into the drive enclosure prior to
turning on the power of the drive cradle. Hard drive will not be detected by
the computer if the power to the drive cradle is turned on without the Cipher
key. Under such condition, the system has to be restarted with the Cipher key
already inserted into the drive enclosure in order to detect the hard drive.
The key lock of the drive cradle must be in the lock position in order to get
power to the hard drive. This also locks the drive enclosure inside the drive
cradle.
Once the drive is detected by the system OS, the Saturn Cipher key may be
removed from the drive enclosure. The Saturn Cipher hard drive will
continue operating normally till it is removed from the system or powered off.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide12
Chapter 9
USIB interface cable installation
USB 2.0 USIB interface cable
Ø Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1
specification, it is fully forward and backward compatible with
current USB systems.
Ø If you do not have an USB2.0 port, you may install an optional
USB2.0 adapter or controller
USB driver installation
For Win98 and Win98SE
1.
2.
3.
4.
5.
6.
7.
Make sure your computer is up and running.
Insert the USB cable to the USB Port.
A "New Hardware Found" message shall pops up.
Follow wizard and point to the location of the driver. (Follow the
steps from the Driver Disc to where you saved the driver files)
Let Windows finish the installation and that’s it.
Double click My Computer icon and there should be an extra drive
letter for the Saturn Cipher ExDrive.
You may now access the drive.
Note: Saturn Cipher ExDrive is Plug and play under Windows XP, and
Me, 2000. There is no third party driver needed.
Brand New Hard drive must be Partitioned and Formatted first.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide13
eSATA USIB interface cable
eSATA Saturn Cipher ExDrive Installation
For Win98SE, Me, 2000 and XP
Note: There no drivers needed to use the Serial ATA cable as long as the
drivers are installed for the Serial ATA Controller card/chip. It is plug and
play.
Note: Brand New Hard drive must be Partitioned and Formatted first.
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide14
Technical Support
If you need assistance to get your unit functioning properly, please call
Addonics Technical Support. Our technical staff will be happy to assist you,
but they will need your help to do so. Calling the technical support staff
without all the proper information can be both time consuming and
frustrating. Here are some tips to help you out:
(1)
(2)
(3)
(4)
MODEL NUMBER – Please have this number on hand.
SYSTEM INFORMATION – Type of computer, peripherals, etc.
OPERATING SYSTEM – What version of Windows
WHAT’S THE TROUBLE? – Give enough information
About your problem so that we can recreate and diagnose it.
FREE Software Drivers for all Addonics Technologies
Products are available 24 hours per day at the
World Wide Web Site: www.addonics.com.
Contact Information
Addonics Technologies
2466 Kruse Drive
San Jose CA, 95131
Phone:
Fax:
Email:
Internet:
408-433-3899
408-433-3898
[email protected]
http://www.addonics.com
TECHNICAL SUPPORT
Phone:
Hours:
Email:
408-433-3855
8:30-6:00 PST
[email protected]
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement