ABS, Air Valves, Air Dryers
1
COMPRESSORS AND PARTS
REMANUFACTURED EXCHANGE
COMPRESSORS
FLANGES
ENGINES
Caterpillar 3406
Caterpillar 3406B
Caterpillar 3408
Mack 6 Cylinder
See Bulletin
PRO-01-7 for
Mack c/o
Caterpillar 3116
TU-FLO 500
285131
284310
284662
TU-FLO 501
286546
103274
286552
286544
102697*
TU-FLO 700
289349
103278
289744
289340
TU-FLO 1400
104583
104584
TU-FLO 550
107509
107511
TU-FLO 750
107508
107510
-
-
-
-
107981
-
Mack 8 Cylinder
-286574
289348
286621
Cummins
NH,NTC,KT,KTA
Series engines
See Bulletin
PRO-01-2
284718*
286554
286618*
286554
289339
-
286570
286570
101590
101590
286619(1)
106780(1)
276962
286539
289941
285252
-
101158
Cummins
VTB-903
Cummins VT-903
Cummins VT-350
See Bulletin
PRO-01-2
Series 60
Detroit Diesel
0° Tilt
Detroit Diesel
0° Tilt
Detroit Diesel
0° Tilt
-
107869
108779
107506
107507
107622(1)
107623(1)
107513
107512
-
-
(1) Series 60 compressors must be replaced with series 60 compressors only. Failure to do so will result in
compressor damage.
* Top discharge cylinder head
** TU FLO-700 cylinder head incorporates both side and top discharge.
Note: Part numbers for all remanufactured parts in the New Life inventory have an "X" suffix to indicate a
remanufactured part. The "X" has been left off all above numbers for clarity.
Model
TU FLO 501 COMPRESSOR
PC
NO.
SER.
NO.
MFG. BY BENDIX IN U.S.A.
Bendix
Piece No.
Serial No.
Country of
Manufacture
TU FLO 501 COMPRESSOR
PC
NO.
SER.
NO.
REMFG. BY BENDIX IN U.S.A.
Compressor Nameplates
A nameplate is attached to all compressors. It displays
the model, piece number and serial number. A nameplate
with a black background denotes a new/original equipment
compressor, whereas a nameplate with a red background
designates that the compressor is a Bendix
remanufactured/replacement unit. When making
reference to a particular compressor, use the pc. no.
stamped on the nameplate
2
COMPRESSORS AND PARTS
REMANUFACTURED HALDEX COMPRESSORS
HALDEX BASE MOUNT, PULLEY DRIVE
ITEM
1
1
2
2
3
3
3
PART NO.
KN7010X
KN7020X
KN85020X
KN86020X
EL13020X
EL13021X
EL13060X
CORE
GROUP
700
700
850
850
1301
1301
1301
TYPE
EL740
EL740
EL850
EL850
EL1300
EL1300
EL1300
CATEGORY
4 HOLE BASE
4 HOLE BASE
4 HOLE BASE
4 HOLE BASE
4 HOLE BASE
4 HOLE BASE
4 HOLE BASE
COOLING
AC
AC
AC
WC/AC
WC
WC
WC
PORT LOC
RIGHT/RIGHT
LEFT/LEFT
RIGHT/TOP
RIGHT/TOP
RIGHT/RIGHT
LEFT/LEFT
RIGHT/RIGHT
DISCHARGE
FLANGE
FLANGE
THREADED
THREADED
FLANGE
FLANGE
FLANGE
NOTES
BASE OIL OPTION
BASE OIL OPTION
BASE OIL FEED
HALDEX FLANGE MOUNT - ENGINE DRIVE
CUMMINS APPLICATIONS, WATER COOLED
4
4
PART NO.
EL13040X
EL16040X
CORE
GROUP
TYPE
1300 EL1300
1600 EL1300
PART NO.
EL13050X
EL13051X
EL13070X
EL13053X
CORE
GROUP
1300
1300
1300
1353
CATEGORY
CUM IN LINE
CUM IN LINE
COOLING
WC
WC
PORT LOC
DISCHARGE NOTES
RIGHT/RIGHT TOP/FLANGE
RIGHT/RIGHT TOP/FLANGE
DETROIT DIESEL APPLICATIONS, WATER COOLED
5
5
5
6
TYPE
EL1300
EL1300
EL1300
EL1300
CATEGORY
DDC 0° TILT
DDC 0° TILT
DDC 1° TILT
DDC 0° TILT
COOLING
WC
WC
WC
WC
PORT LOC
RIGHT/RIGHT
RIGHT/LEFT
RIGHT/LEFT
RIGHT/LEFT
DISCHARGE
FLANGE
FLANGE
FLANGE
FLANGE
1
2
3
KN7010X
KN7020X
KN85020X
KN86020X
EL13020X
EL13021X
EL13060X
Haldex Repair Kits
RN33C
EL740 Unloader Kit
RN26GV Gasket Kit
SN144AB Installation Kit
Haldex Repair Kits
RNT26JB EL850 Unloader Kit
RN26JH EL 850 Gasket Kit
SN144R Installation Kit
5
6
EL13040X
EL16040X
EL13050X
EL13051X
EL13070X
EL13053X
Haldex Repair Kits
RNT26A
EL1300 Unloader Kit
RN26GY EL1300 Gasket Kit
SN144C Installation Kit for EL13050X
SN144AP Installation Kit for EL13051X
SN144E
Installation Kit for EL13070X
60 SERIES NON-THRU DRIVE
60 SERIES THRU DRIVE
Haldex Repair Kits
RN26A
EL1300 Unloader Kit
RN26GW EL1300 Gasket Kit
SN144
Installation Kit for
EL13020X & EL13021X
SN144D Installation Kit for EL13060
4
Haldex Service Repair Kits
RNT26A
EL1300, EL1600 Unloader Kit
RN26GX EL1300, EL1600 Gasket Kit
SN144B
Installation Kit
NOTES
Haldex Repair Kits
RNT26A
EL1300 Unloader Kit
RN26GY EL 1300 Gasket Kit
SN144BD Installation Kit
3
COMPRESSORS AND PARTS
REMANUFACTURED HALDEX COMPRESSORS
HALDEX FLANGE MOUNT - ENGINE DRIVE
DETROIT DIESEL APPLICATIONS - WATER COOLED
ITEM
7
7
7
8
8
8
8
PART NO.
EL13090X
EL13100X
EL13160X
EL16050X
EL16051X
EL16070X
EL16072X
CORE
GROUP
1300
1300
1300
1600
1600
1600
1600
9
9
EL16111X
EL16112X
1600
1600
TYPE
EL1300
EL1300
EL1300
EL1600
EL1600
EL1600
EL1600
CATEGORY
DDC 41° TILT
DDC 50° TILT
DDC 45° TILT
DDC 0° TILT
DDC 0° TILT
DDC 1° TILT
DDC 4° TILT
COOLING
WC
WC
WC
WC
WC
WC
WC
PORT LOC
RIGHT/RIGHT
RIGHT/RIGHT
LEFT/RIGHT
RIGHT/RIGHT
RIGHT/LEFT
RIGHT/LEFT
RIGHT/LEFT
DISCHARGE
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
FLANGE
NOTES
60 SERIES NON-THRU DRIVE
MACK APPLICATIONS
EL1600 MACK EXT. FLG.
EL1600 MACK EXT. FLG
7
EL13090X
EL13100X
EL13160X
Haldex Repair Kits
RNT26A
EL1300 Unloader Kit
RN26GY EL 1300 Gasket Kit
SN144G Installation Kit For EL13090X
SN144H Installation Kit For EL13100X
SN144M Installation Kit For EL13160X
AIR CLEANER
For use with all compressor types.
Provides greater atmospheric air intake
capacity. Suitable for mounting on
Haldex and competitive model
compressors. May also be remote
mounted by using accessory intake
manifold connector kits SN3711AC and
SN3711AD plus cut to length 3/4" ID
hose with fittings and clamps. Includes
100696E element.
Mounting Centers: 2.75"
Overall Height:
4.44"
Diameter:
4.30"
Part No. KN19040
WC
WC
LEFT/LEFT
LEFT/LEFT
8
EL16050X
EL16051X
EL16070X
EL16072X
Haldex Repair Kits
RNT26A
EL1600 Unloader Kit
RN26GY EL 1600 Gasket Kit
SN144AP Installation Kit For EL16051X
SN144C Installation Kit For EL16050X
SN144E & Installation Kit For EL13170X
SN3711G (Need one of each )
SN144E
Installation Kit For EL16072X
COMPRESSOR
MANIFOLD KIT
(INTAKE)
For 1/2" Pipe
Mounting Centers: 2.75"
Part No. SN3711AA
COMPRESSOR
MANIFOLD KIT
(INTAKE)
For 3/4" Hose
Mounting Centers:
2.75"
Part No. SN3711AD
FLANGE
FLANGE
POWER STEERING
GEAR INCLUDED
9
EL16111X
EL16112X
HaldexHaldex Repair Kits
RNT26A
EL1600 Unloader Kit
RN26GZ EL 1600 Gasket Kit
SN144J
Installation Kit
INLET CHECK VALVE
Part No. SN3711AJ
COMPRESSOR
MANIFOLD KIT
(DISCHARGE)
For 1/2" Pipe
For all EL1300 & EL1600
Compressors
Part No. SN3711J
4
COMPRESSORS AND PARTS
UNLOADER KIT
Kit contains parts to
install 3 piece unloader
plungers in Tu-Flo
compressors
Part No. 279615
AIR STRAINER
For TF-400, 500, 501, 600, and 700
Bendix compressors
Air Strainer Part No. 278500
Contents:
(1) 279905
Mounting Baffle (1) 243009
Filter Element
(1) 243430
Gasket
(2) 237648
Lock Washer
(1)
279903
Cover
(2) 243411
Cap Screw
AIR DRYERS
Governor
The primary duty of
the air dryer
Compressor
Reservoir #1
is to eliminate the moisture
and dirt that would cause
damage to valves and other
system components.
The air dryer
removes these
pollutants, providing
dry air, free of
contaminants that can
cause premature failure of
the air and brake system.
Air Dryer
Bendix AD-9 Air Dryer
12 Volt
Description
PART NO.
Complete New Unit
065225
Complete REMANUF. Unit
109685X
END COVER INFORMATION
New Unit: (Special Order)
065231
Supply Port:
1/2" P. T.
Delivery Port:
1/2" P. T.
Control Port:
1/4" P. T.
Check Valve Ass'y
107800
Purge Valve & Heater Ass'y (REMANUF.) 5004341X
Remanuf. Desiccant Cartridge
107794X
Purge Valve Ass'y - Maint. Kit
5005037
Bracket Kit
107695
Check
Valve
Delivery
Port
Heater &
Thermo
Connection
Supply Port
Safety
Valve
Purge
Exhaust
Port
End Cover Bottom View
AD-9 Air Dryer
5
AIR DRYERS
AD-9 Air Dryer Parts List
Kits and Service Replacement Assemblies
List # Description
2
3
4
5
6
7
8
Note:
Old and new purge valve
assemblies are interchangeable
in all AD-9 air dryers.
ARE YOU READY FOR COLD
WEATHER?
Check your stock of air dryer
parts BEFORE the season
demands are here!
Key
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Part Number
Remanuf. Purge Valve Ass'y
12V
24V
Comp w/Heater. See List #2 5004341X 5004342X
New Replacement Purge Valve
12V
24V
Ass'y Complete w/Heater
800405
5004342
(DLU) See List #3 Below
Desiccant Cartridge Kit
New
Remanuf.
See List #4 Below
107796
107794X
Purge Valve Maintenance Kit 5005037
5005893
See List #5 Below
hard seat
soft seat
Heater & Thermostat Kit
12V
24V
See List #6 Below
109578
109579
Check Valve Maintenance Kit
3/4"
1/2"
See List #7 Below
107799
107800
Mounting Bracket Kit
107695
See List #8 Below
Description
List 1 List 2 List 3
Purge Valve Shoulder Bolt
Exhaust Diaphragm
Purge Valve
1
/4" Tapping Screw
X-3
X-3
X-3
Flat Washer
X-3
X-3
X-3
Purge Valve Housing
#8 Self Tapping Screw
Sealing Ring
Heater & Thermostat Ass'y
Wire Harness & Connector
Spring
Purge Piston
O-Ring
O-Ring
X
X
X
O-Ring
X
X
O-Ring
X
X
X
Check Valve Ass'y
Check Valve O-Ring
3
/8" X 21/8" End Cover Screw
3
/8" Special Washer
3
/8" X 21/8" Bracket Screw
Lower Mounting Bracket
Safety Valve
End Cover
Lock Nut
Housing
O-Ring 298922
O-Ring 298927
Desiccant Cartridge Ass'y
Upper Mounting Brkt.
5
/16" x 41/2" Upper Brkt. Bolt
Upper Brkt. Strap
5
/16" Nut
5
/16" Lock Washer
Exhaust Cover
CompletePurgeValveAss'y
X
X
X
List 4 List 5 List 6 List 7 List 8
X
X
X
X-2
X
X
109869
X
X
X
X
X
X
X
X
X
X
X-4
X-2
X
285849
X-2
X
X
X
X
X
X
X
X
112399
6
AIR DRYERS
BENDIX REPAIR KITS
AD-2 AIR DRYER
102657
287053
287298
BENDIX REPAIR KITS
AD-4 AIR DRYER
AD-2
103817
Thermostat Kit
Includes Thermostat,
gasket and "O" ring.
Purge Valve
Replacement Kit
Includes purge valve,
diaphragm, boot and
"O" rings
Check Valve Kit
103818
103879
103980
Major Maintenance Kit
Includes desiccant
cartridge, end cover kit
103980, and sealing ring.
Purge Valve
Replacement Kit
Purge valve and
exhaust diaphragm
Seal kit
Includes check valve ass'y,
boot, and sealing rings
End Cover Kit
"O" ring and piston spring
5.62"
AD-SP Air Dryer
System Purge
Service
Part No.
800887
065594
11.07"
Control
1/4" PT
AD-4
Remanf.
Part No.
109991X
109992X
Heater &
Thermostat
Volts-Watts
(See Note 2)
12V - 980W
24V - 90W
Note: 12 & 24 volt AD-SP air dryers are
identified by connector color:
White - 12V, Gray = 24V.
AD-SP Air Dryer Kits
Heater &
Thermostat
Connector
1/2" Delivery
1/2" Supply
Part No.
5008414
Part No.
5005624
Del Check Valve Kit
AD-IP Air Dryer
Integral Purge
9.25"
12.5"
Height
Cartridge Kit
Control
1/4" P.T.
3.33"
Note 5
Service
Part No.
065612
065613
Remanuf.
Part No.
109477X
109478X
Heater &
Thermostat
Volts-Watts
(See Note 2)
12V - 90W
24V - 90W
Note - All replacement air dryers include 109871
(wire harness and splice kit) and 5001247
(mounting bracket kit).
Note - 12 & 24 volt air dryers are identified by
connector color .
White = 12V, Gray = 24V.
Note - Center to center of slots in both brackets is
5.64 inches.
AD-IP Air Dryer Kits
Delivery
1/2" P.T.
Heater &
Thermostat
Connector
1/8" P. T. ECON Port
Behind Supply Port
Supply
1/2" P. T.
Part No.
109496
Part No.
5003547
Heater & Thermo Kit
24 Volt
Purge Valve Kit
12 volt
7
AIR DRYERS
AIR DRYER
PURest™ Air Dryer Part No. DA34100
• Multi-Treatment Cartridge employs 5
stages of cleaning to ensure dry system air.
• Universal munting bracket eases
retro-fit installations. Fits Pure Air
Plus, Dryest, AD type and SS type
air dryer bolt patterns.
• Integrated turbo protection.
• Built-In heater prevents freezing and
damage to the dryer.
Heater:
12 Volt
Desc:
With Bracket, Left - Inlet Port
OEM Part No:
N4253AA
MTC Desiccant Cartridge
Part No. DQ6050
Heater Kit 12 volt
Part No. DQ6013
PURE AIR™
Repair Kits
Triple action
cools, filters and
dries the air.
May be mounted
horizontally or
vertically.
Serviceable from
either end.
Major Kit
Part No. RN60A
Outlet
Check Valve Kit
Part No. RN60G
12V Lower
Cover Ass'y
Part No. RN60D
Minor Kit
Part No. RN60
Purge Valve Kit
Part No. RN60F
12V Heater Kit (Not Shown)
Part No. RN60N
Dessicant Type Air Dryer
Part No. R955205
This air dryer from Meritor Wabco is just
11 inches tall! It has a spin-on cartridge
that is replaceable in under 5 minutes.
It has a 12V-100 Watt heater with an
integral turbo cut-off valve and mounting
bracket. The integral regeneration valve
eliminates the need for a purge tank.
PURE AIR PLUS™
AIR DRYER Repair Kits
Major Repair Kit
Includes purge,
Turbo Saver™,
& check valve.
Part No. DQ6020
Desiccant Kit
Includes desiccant
cartridge &
coalescing filter
Part No. DQ6026
Desiccant Cannister:
12V Heater kit
Part No. DQ6011
Coalescing filter
kit Part No. DQ6032
Part No. DA33120
Cartridge Kit
Part No.R950011
Turbo Cut-Off
Valve Kit
Part No. R950013
SERVICE KITS
Purge Valve Kit
Outlet
Part No. R950014
Check Valve Kit
Heater Service Kit Part No. R950017
Part No. R950015
8
ALCOHOL EVAPORATOR - ISOLATION VALVE - GOVERNOR
ISOLATION VALVE
(Turbo Cut-Off Valve)
Used with air driers not equipped with
this feature. Allows use of air dryer
on turbo charged engines without
affecting engine performance.
Installs directly (1/2"-14 NPTF) to air
line inlet port of air dryer.
Part No. KN23500
FLEETCRAFT GOVERNOR
Features ball check design
with filtered ports. Can be
mounted at a remote
location or directly to
compressor. Preset to open
at 120 PSI, close at 100 PSI.
Can be Adjusted. Includes 4
pipe plugs, mounting gasket
and instructions.
New, outright.
Part No. FC18530
ALCOHOL EVAPORATOR
An automatic vaporizing device for
keeping air lines and air reservoir
free of ice.
•Easy to install
•Pressure protected
•Holds 40 oz. of methyl alcohol.
•1/2" NPTF Ports
Part No. A72420
Bendix D-2 Governor
Remanufactured. No Core.
For mounting to the
compressor or mounted
remotely. Pressure range
100 - 120 PSI.
5" overall height.
1/8" NPT ports.
Sold outright.
Part No. OR275491X
Part No. 275491 (NEW)
Haldex Micromax™ GOVERNOR
New, outright.
Part No. KN18537
1/3 the size of a standard governor.
Fully nterchangeable, complete
installation kit, mistake proof exhaust
port eliminates failures.
PRESSURE RELIEF (SAFETY) VALVES
PRESSURE RELIEF
VALVE
For air reservoir
installations.
Made of brass and
stainless steel.
Will not corrode.
Factory set at 150
PSI. 3/8" NPTF.
Part No. KN31250
PRESSURE RELIEF
VALVE
Brass body and
stainless steel spring.
Factory set at 150
PSI. 1/4"NPTF
Part No. 1031200
L
ST-3 SAFETY VALVE
75PSI Pressure
setting, 1/4" port
Part No. 285850
SAFETY VALVE
Protects against excessive
pressure in air system.
Installs in the supply
reservoir. Factory set at 150
PSI. Can be adjusted.
Automatically closes after
excess pressure is
released to atmosphere.
1/4" NPT.
(A) Part No. 205105
(B) Part No. 284142
L
(A)
L=3.25"
(B)
L=2.56"
PRESSURE PROTECTION VALVE (SAFETY) VALVES
PRESSURE
PROTECTIONVALVE
TYPE PR-4
Closes at a preset
pressure. Factory set at 85
PSI. Many different
applications. Can be used
to protect one reservoir
system from another if a
reservoir system failure
Supply
occurs. Nonadjustable.
1/4" PT supply and
delivery ports.
Part No. 286500
Safety Valve Kit ST-4
The ST-4 Safety Valve is
installed in the extra
compressor discharge port,
if available, or the
discharge line to prevent
compressor damage in the
event of discharge line
blockage. Becaus of this a
standard safety valve may
not be used.
Part No. 131081
Delivery
PRESSUREPROTECTION
VALVE TYPE PR-2
Closes at a preset pressure.
Factory set at 65 PSI. Can be
adjusted. Many different Supply
applications. Can be used to
protect one reservoir system
from another if a reservoir
system failure occurs.
Delivery
1/4" PT supply and
delivery ports.
Part No. 277147
1.25"
9
PRESSURE PROTECTION VALVES
PRESSURE PROTECTION
VALVE
Used to protect air brake
system from accessory failure.
Nonadjustable.
1
/8" NPTF inlet port,
1
/4" NPTF outlet port.
Part No.
KN31000
KN31010
Outlet
Inlet
PRESSURE PROTECTION VALVE
with one way check valve
Used to protect air brake system from accessory
failure. Nonadjustable. 3/8" NPTF inlet port,
1/2" NPTF outlet port.
Opening
Part No.
Pressure
KN31170
50PSI
KN31171
75 PSI
Operating PSI
Open Closed
65
45
95
75
Tractor Protection Valve
PRESSURE
PROTECTION VALVE
3
/8" NPTF Inlet,
3
/8" NPTF Outlet
Operating PSI
2"
Part No. Open Closed
110257
75
70
110258
95
90
Part No. 065706
PRESSURE
PROTECTION VALVE
3
/8" NPTF Inlet and Outlet
PRESSURE CONTROL VALVE
Pressure setting from 0 PSI to
reservoir pressure.
1
/4" NPTF inlet and outlet,
1
/4" NPTF exhaust
Part No. 5400
29/16"
Part No.
140270
Operating PSI
Open Closed
70
60
CHECK VALVES
SINGLE CHECK VALVE
SC-2 Steel Seat
Part No.
A
B
C
800372 1/2" PT 1/2" PT 2.92"
800373 3/8" PT 3/8" PT 25/32"
C
A
B
SINGLE CHECK VALVE
SC-1 Steel Seat
Part No.
A
B
C
800375 1/4" PT 1/4" PT 23/32"
C
A
B
C
A
SINGLE CHECK VALVE
Type A
SC-2 Steel Seat
Part No. TYPE
A
B
C
1
KN23000
A
/2" PT 1/2" PT 2.46"
3
KN23010
A
/8" PT 3/8" PT 2.47"
1
KN23060
B
/2" PT 1/2" PT 1.85"
Type B
(90 Degree)
B
SINGLE CHECK VALVE
SC-1 Rubber Seat
Part No.
A
B
C
10200-3/8 3/8" PT 3/8" PT 213/16"
10200-1/2 1/2" PT 1/2" PT 213/16"
10
CHECK VALVES
C
A
E
D
B
The double check valve is used
when a single function or
component must be controlled
by either of two valves. The
double check valve permits
either, but not both control
valves to operate the device
connected to its outlet port.
DC-4 DOUBLE CHECK VALVE
Part No.
A
B
C
D
278595 1/4" PT 1/2" PT 1/4" 2.75"
278598 3/8" PT 3/8" PT 1/4" 2.75"
Inlet B
"B" Hole
227/32"
227/32"
3
/8" NPTF
DC-4
DOUBLE CHECK VALVE
3
All Ports:
/8" NPTF
11
"B" Hole:
/32" Dia.
Part No. 278614
Outlet C
Inlet D
E
/4"
3
/8"
1
TWO WAY CHECK VALVE
(Diaphragm Type)
Mount in any position
Use in place of ball or
shuttle types
Used when two inputs
must become one input.
3
/8"
Inlet B:
3
Inlet D:
/8"
Outlet C: 3/8"
Part No. KN25060
QUICK RELEASE VALVES
QRN
QUICK RELEASE VALVE
Lightweight, nonmetallic.
Mounting holes 11/32" diameter
on 11/2" centers.
QUICK RELEASE VALVE
Aluminum Die Cast Body
Supply/Delivery Differential 0 PSI
Ports
Part No. Supp Del
3
3
1032005
/8"
/8"
1
3
1032011
/2"
/8"
QUICK RELEASE
VALVE QR-1
Supply Ports: 1/2"
Delivery Ports: 3/8"
Mounting holes on
11/2" centers
Part No. 229860
Supply Ports: 3/8"
Delivery Ports: 3/8"
Mounting holes on
11/2" centers
Part No. 229859
Part No.
065066
065067
065068
A
1
/2" PT
/8" PT
3
/8" PT
3
B
Supply
3
/8" PT
3
/8" PT
3
/8" PT
Supp/Delivery
Differential
Del. (PSI)
1 Max.
1 Max.
5-8
QR-1C
QUICK RELEASE VALVE
With Double Check Valve
A dual function valve. The QR
serves the spring brake chambers
as a QR valve; the double check
valve prevents a service and
emergency brake application from
occurring at the same time.
Part No. Supply Delivery
1
1
289182
/4
/4
3
1
289714
/4
/8
11
QUICK RELEASE VALVES
QUICK RELEASE VALVES
Used wherever a quick release function is required in the air brake system.
Made of Engineering Grade Plastic. Aids in meeting FMVSS 121 timing
requirements.
QRN-2
Inlet Delivery Differential
Part No. Port
Ports
PSI
3
3
800064
/8"
/8"
0
1
3
800063
/2"
/8"
0
Inlet Delivery Differential
Part No. Port
Ports
PSI
3
KN32050 1/2"
/8"
6
3
KN32060 3/8"
/8"
6
(A)
(C)
(B)
QUICK
RELEASE
VALVES
Cracking Port Size (NPTF)
Part No. Pressure (A)
(B)
(C)
1
3
3
2000D1/2 0-1PSI
/2"
/8"
/8"
3
1
1
2000D3/8 0-1PSI
/8"
/4"
/4"
BRAKE (FOOT) VALVES
3
3
/8" P.T.
/8" P.T.
3
3
/8" P.T.
/8" P.T.
TREADLE ASSEMBLY
Aluminum assembly with
no-slip design.
Replaces most steel pedals
Part No. SN4017A
DUAL BRAKE VALVE
The E-6 dual brake valve is
a floor mounted treadle or
Shown with
lever operated valve with
valve.
two separate supply and
delivery circuits for service
Valve not
and secondary braking,
included.
providing graduated control
Part No. 238888
for applying and releasing
Folcrum Pin
vehicle brakes.
Part No. 286171
Part No. 236979
Mounting Plate
E8P BRAKE VALVE
Lower Body
Rotated90°
Replaces E-12
065313 AND 800583
Part No. 800629
RUBBER COVERED
TREADLE ASSEMBLY
Includes:
229939 Treadle
236288 Roller
240069 Treadle Cover
Part No. 229938
FOOT OPERATED VALVE
DUAL CIRCUIT
Provides smooth and consistent
pedal feel over competitive
application valves.
Requires minimal modification for
change over.
3/8" ports.
Bottom portion of valve made of
EGP plastic.
Part No. KN22150
CONTROL VALVES
5.36"
4.19"
MV-2 CONTROL MODULE
An integrated control assembly for
control panel mounting in tractor. It
provides all the federal legal
requirements for trailer air supply and
parking brake control and permits the
tractor parking brakes to be applied
while air is supplied to the trailer.
Six 1/4" ports.
Nonmetallic.
Part No. 101437
MV-2 SPOOL INSERTS
The MV-2 control module is serviced by
replacement of the complete spool
inserts.
Spool Ass'y
Part No. 101569
Spool Ass'y
Part No. 101570
12
CONTROL VALVES
Auxiliary
Port
Trailer
Delivery
Secondary
Supply
Tractor
Delivery
Mounting
Plate
MV3 CONTROL MODULE
An integrated control assembly
for control panel mounting in tractor.
It provides all the federal legal
requirements for trailer air supply
and parking brake control and
permits the tractor parking brakes
to be applied while air is
supplied to the trailer. Six 1/4" ports.
Nonmetallic.
Designed
to
supersede the MV-2 valve. Different
mounting seperates styles.
Part No. 800519
Part No. 800573
4.21
Mtg. Hole
3.00
MV-3 MODULE MAINTENANCE KITS
MAINTENANCE KIT PART NO. 107216 CONSISTING OF:
KEY
KeY
No. QTY DESCRIPTION
No. QTY. DESCRIPTION
1
2
O-RING
7
2
PLUNGER SPRING
2
2
O-RING
8
1
O-RING
3
2
O-RING
9
1
O-RING
4
2
O-RING
10 1
Override SPRING
5
2
EXHAUST SEAL 11 1
SPRING
6
2
O-RING
12 1
CHECK VALVE
PUSH PULL CONTROL
VALVE PP-5
A pressure sensitive on-off
control commonly used
with vehicle torque
converter system, engine
speed control, and some
parking brake systems.
Automatic release
pressure 40 PSI.
1
/8" supply, 1/8" delivery and
exhaust, all NPTF.
Part No. 281946
FLIPPER STYLE
VALVE
Panel mount. On-off
nonautomatic two
position valve. Made
of Engineering Grade
Composite.
All Ports 1/8". Mounting holes on
1.5" centers.
Part No. KN20001
SHUTTLE KIT PART NO. 107217
KEY
NO. QTY. DESCRIPTION
13
1
RETAINING RING
14
1
SHUTTLE VALVE
15
1
O-RING
16
1
O-RING
17
1
O-RING
PUSH PULL
CONTROL VALVE PP-1
A pressure sensitive
on-off control usually
used to control parking
and emergency brakes.
1
/8" supply, 1/4" delivery and
exhaust, all NPTF.
Automatic
Release
Part No. Pressure
276566 20 PSI
276567 40 PSI
PUSH-PULL STYLE VALVE
Controls tractor protection.
Made of Engineering Grade
Composite.
Exhaust and delivery ports:
1
/4-18 NPTF.
Supply and control ports:
1
/8-27 NPTF.
Pop Pressure: 35 PSI.
7
/8" mounting hole required.
Part No. KN20025
PUSH-PULL STYLE VALVE
Controls parking/emergency
brakes. Pop pressure: 35±10
PSI. 7/8" mounting hole
required. Knob included.
Made of Engineering
Grade Composite.
All ports 1/8" NPTF.
Part No. KN20021
PUSH-PULL STYLE
VALVE
Panel mount.
Made of EGC plastic.
All ports 7/8" NPTF.
Pop
Part No. Pressure
KN20031 25-35 PSI
KN20033 7-17 PSI
13
CONTROL VALVES
MANIFOLD DASH MODULE
One piece body construction - no
center body leakage. Smaller valve
size offers more room behind the dash
for hoses and accessibility. Made of
Engineering Grade Composite - all
ports have molded identification. All
ports 1/4" NPTF.
Red and Yellow knobs included.
Part No. KN20615
PP-DC Control
Valve
Exhaust
Tractor
Delivery Aux. Supply
Part No. 065661
Mounting Hole
1/4-20 THD.
Port Type
Push to connect
w/ 3/8” O.D. tubing
MIDLAND
Reservoir 2
Trailer Delivery Reservoir 1
PUSH-PULL VALVE
3-way
Outlet
Bulkhead mount,
fits 5/8"
dashboard hole.
All ports 1/4".
Made of aluminum.
Complete with
Exhaust
boot and knob.
Part No. A83580
PUSH-PULL STYLE VALVE
Control tractor only
parking. Bulkhead
mount; 7/8" hole
required. Will not stay
in half-on, half-off
position. All ports
1/8-27 NPTF. Pop
pressure 17.7
Part No. KN20035
HAND CONTROL VALVE
Pull-push with Automatic
Shut-Off. Shut-off 30±5 PSI.
1
/4" outlet and inlet,
1
/8" exh. Includes knob and
nameplate shown below.
Part No. 99600B
Inlet
Part No. 13
Part No. 819
KNOBS FOR PUSH-PULL VALVES
Pin type.
RCCC red.
Pin included.
Part No.
KN20900
NOTES:
Pin type.
RCCC yellow.
Pin included.
Part No.
KN20901
Pin type.
RCCC blue.
Pin included.
Part No.
KN20902
Pin type.
RCCC yellow.
Pin included.
Part No.
KN20903
All knobs made of Engineering Grade Composite.
Threaded knobs have 1/4-20 threads.
Threaded
type.
RCCC yellow.
Pin included.
Part No.
12509
Threaded
type.
RCCC red.
Pin included.
Part No.
12501
LEVER STYLE VALVES
TW-1 CONTROL VALVE
Two position steel valve
with chrome handle.
All ports 1/8" NPTF.
Dial plate not included.
Part No. 229635
TW-3 LEVER TYPE
CONTROL VALVE
Used in parking and
emergency brake
systems. 1/4" supply and
delivery ports.
Part No. 283040X
21/2"
Delivery
(2)
Delivery (2)
Supply
Supply
14
LEVER STYLE VALVES / TRAILER BRAKE CONTROL VALVES
DOUBLE FLIPPER STYLE VALVES
Panel mount, directional air control
valve. May be used for control of
push-pull air cylinders or various other
air operated devices.
Supply ports 1/4" NPTF
Delivery Ports (2) 1/8" NPTF
PART NO.
APPLY/RELEASE POSITIONS
KN20080 3 position with manual
release only.
KN20090 3 position with automatic
release when supply
"A" is applied
Exhaust
Delivery
Supply
LEVER CONTROL VALVE
All ports 1/8" NPTF
Complete with
face plate.
Part No. 21600
Outlet
(2)
Inlet
TRAILER BRAKE CONTROL VALVES
TRAILER BRAKE
CONTROL VALVE
In column mount.
Made of Engineering Grade
Composite.
Handle applies 50° maximum.
Handle and knob not supplied.
All 1/4" ports.
Holding Type:
Part No. KN20541
TRAILER BRAKE
CONTROL VALVE
GM in-column mount. Made of
Engineering Grade Composite.
Handle rotates 72° maximum.
3
/8" NPTF deliver and supply
ports, 1/8" exhaust.
Special tube nuts in ports.
Holding Type:
Part No. KN20551
TRAILER BRAKE
CONTROL VALVE
External steering column
mount. Handle applies
70° maximum. Chrome
handle. All ports 1/4" NPTF.
Holding Type:
Part No. KN20561
TRAILER BRAKE CONTROL VALVE
TRACTOR PROTECTION VALVES
Tractor
Emerg.
1
/4" NPTF
(A) Trailer Emerg.
NPTF
TW-4 CONTROL VALVE
1/8" Ports
Part No. A
279000 1/2"
Part No. 276635
Tractor
Service
3
/8" NPTF
STEV Valve
Provides Spring
Brake Priority
-Assures that the trailer
parking brakes will not
release before there is
sufficient air pressure in
the reservoir to apply
service brakes.
Part No. 51321
B
1/2"
(B) Trailer
Service
NPTF
SYNCHRONIZING VALVES
TRAILER EMERGENCY VALVE
TEV Valve
Provides Spring
Brake Priority
-Retains the ability of the
driver to repeatedly apply
and release the Parking/
Emergency Brakes even
with a damaged tank.
Part No. 51301
TP-3
TRACTOR PROTECTION
VALVE
1
1
SV-1 SYNCHRONIZING VALVE
A pneumatic control valve.
Controls air from remote air
supply other than control air
supply. All threads NPTF.
/4" Control
/8" Exhaust
1
/4"
Supply
1
/4"
Delivery
With common control and
supply pressure, inlet
opens at "A", and
exhaust opens at "B".
Part No.
278825
282472
283700
A
PSI
42
21
62
B
PSI
28
11
50
15
SPRING BRAKE CONTROL VALVES
SR-5
Identification
Hole
1
/4" Service/
Spring Brake
Reservoir
(A)
Trailer
Service
3
1
/4" Trailer
Service
/8" Delivery (4)
SR-5 TRAILER
SPRING BRAKE VALVE
Die-cast aluminum,
reservoir mounted valve
that controls up to four
spring brake actuators
during parking or
emergency applications.
All threads NPTF.
Anti-Compounding:
Part No. 065437
1
/4"
Control
1
/4" NPTF
Balance
Ports
1
/4" Trailer
Supply
3
SPRING BRAKE
CONTROL VALVES
Protected Reservoir System
Four delivery ports
/8" Control
3
/8" Supply
Reservoir
Port (B)
3
/8" Supply
3
/8" NPTF
Delivery
Ports (2)
3/8" Delivery "A"
Part No. Port (A) Port (B)
1
110170
/2"NPTF 1/2" NPTF
110191 3/8" NPTF 1/2" NPTF
FOR QUICK FIX SERVICE
3
/8"
Control
1
/2"
Reservoir
Reservoir
Port (A)
3
3/8" Delivery "B"
/8 Delivery
Part No.
110175
3
/8"
Control
3
/8" Supply
1
/2"
Reservoir
3/8" Delivery (4)
SPRING BRAKE
CONTROL VALVE
Spring Brake Priority System
Complies with all changes to
FMVSS121, Docket 90-3
Designed for use with a
single reservoir on a typical
single or tandem axle trailer
application.
Part No. 110500 single
Part No. 110315 *
Part No. 110800 *
*Note: can be used with (2) 1400 cu.
in. reservoirs on tandem axle trailers.
Part No.
110165
SPRING BRAKE
CONTROL VALVE
Service Reservoir
Priority System
Complies with all changes to
FMVSS121, Docket 90-3
Designed for use with a single
reservoir on a typical single or
tandem axle trailer application.
Part No. 110700
R-7 MODULATING VALVE
Usually found on vehicles
with dual air brake systems,
the R-7 modulates the
spring brakes thru the
application of the foot brake
valve in the event of loss of
rear axle service brake
pressure.
Spring brake pressure is
limited to 90-95 PSI by
the R-7.
Part No. 103081
SPRING BRAKE
EXHAUST VALVE
Part No. 3800
1
/4" Inlet
LINE FILTER
Used in trailer supply line ahead
of spring brake control valve or
relay emergency valve.
Part No. 2550
3
/8"
Outlet
115/16"
Sealco
does not
recommend
use in
trailer
control line.
41/4"
3
/8"
Inlet
Note: can be used with (2) 1400 cu.
in. reservoirs on tandem axle trailers.
Exhaust
RELAY VALVES
RELAY VALVES
2 & 4 Horizontal Delivery Ports.
A multipurpose, low differential, high
capacity, straight relay. Meets
FMVSS-121 timing requirements.
Cover can be rotated without affecting
performance or warranty.
3/8" delivery ports.
1/2" reservoir ports
3/8" control port
2 Delivery Ports
4 PSI crack pressure
Part No. KN28060
4 Delivery Ports
7 PSI Crack Pressure
Part No. KN28080
RELAY VALVES
Four delivery ports facing
down. Cracking pressure
3 ± 1 PSI. Meets or exceeds
MFMVSS-121 requirements.
Cover may be rotated without
affecting warranty.
PART NO. CONTROL DELIVERY
A103600
1/4
3/8
(1)=Plugged
SUPPLY
3/4
AUX
SUPPLY
(1)
16
RELAY VALVES
RELAY VALVES(RG2)
2 Delivery Ports. Compact size.
A fast, low cracking pressure straight
relay for tractor-trailer-truck
applications.Cracking pressures
6 PSI.
Cover may be rotated without affecting
warranty.
EMERGENCY RELAY VALVE
4 port. Suitable for pre-121
trailers, converter dollies, or
exempt trailers. Cracking
pressure 4.5 ±1 PSI
SERVICE EMERG.
PART NO. INLET INLET DELIVERY
KN30300
1/4
1/4
1/4
KN30400
1/4
1/4
3/8
AUX
RES. RES.
(1)
3/4
(1)
3/4
PART NO.
KN28500
KN28510
KN28520
(1)=Plugged
RESERVOIR
A
B
3/8 3/8
3/8 1/2
1/2 1/2
DELIVERY
C
D
3/8 3/8
3/8 3/8
1/2 1/2
INCLUDED WITH VALVE:
(1) 3/8" PLUG.
(1) 1/2", (1) 3/8" PLUG.
(1) 1/2" PLUG.
Control
Control
R12 RELAY VALVE
Piston operated, with 4 delivery ports
for service or parking brakes.
Delivery Ports:
See below
1
Supply Port:
/2" NPTF
1
Control Port:
/4" NPTF
Crack pressure:
4 PSI
3
/8" NPTF
Delivery Ports:
(A) 3/8" Vertical Delivery Ports
Supply
Delivery
Delivery
(A)
Supply
(B)
Control
R12DURADRAIN™RELAYVALVE
1
Supply Port:
/2" NPTF
Crack pressure:
5.5 PSI
1
Delivery Ports:
/2" NPTF
(C) 3/4" Horizontal Delivery Ports (B)
(C)
Delivery
Supply
Part No. 065125
Part No. 065104
1
/2" Vertical Delivery Parts
Part No. 102626
3
/4" Horizontal Delivery Ports
Part No. 103009
Key
1
2
3
4
5
6
7
8
9
10
11
Qty.
1
1
1
1
1
1
1
1
1
1
1
Description
O-Ring
O-Ring
Valve Retainer
Inlet & Exhaust Valve
Valve Spring
Retaining Ring
Exhaust Cover Complete
O-Ring
O-Ring
Diaphragm
O-Ring
Kit Part No. 102802
Delivery
Control
(A)
47/16"
Supply
(B)
Control
Part No. 103010
Vertical Delivery Ports
Part No. 103028
Delivery
BP-R1 Bobtail Brake Proportioning
Relay Valve
•Maintenance Kit 106392
•Universal Mounting Bracket 296010
furnished with valve exchange.
• Remanufactured - Core Charge
PART NO. SERVICE SUPPLY DELIVERY
065145X
1/4
1/2
3/8
065146X
1/4
1/2
3/8
Crack Pressure for 065145X is 4.
Crack Pressure for 065146X is 5.5.
AUX CONRES. TROL
(1)
1/8
(1)
1/8
10 11
BALANCE
R14 RELAY VALVE
Anti-compounding feature permits control
of spring brakes as well as service brakes.
Has 4 delivery ports.
1
Delivery Ports:
/2" NPTF
1
Supply Port:
/2" NPTF
1
Control Port:
/4" NPTF
Crack Pressure:
4 PSI
(A)
Horizontal Delivery Ports
(B)
Supply
MAINTENANCE KIT
For R12 & R14 Valves.
2
5
9
6
8
1/2 PT
SUPPLY
6
7
1
3
4
1/4 PT
Control
17
RELAY VALVES
4 PORT DELIVERY
Used primarily for tandem
axle trailer service brakes
with four brake chambers.
Nipple mounted.
Crack Pressure 4 PSI.
3
Control Port:
/8" NPTF
Reservoir Port: 3/4" NPTF
Delivery Ports: 3/8" NPTF
Part No. 110415
2 PORT DELIVERY
Used primarily for single
axle trailer service brakes,
or axle by axle trailer
brake designs.
Nipple mounted.
Crack Pressure 4 PSI.
3
/8" NPTF
Control Port:
Reservoir Port: 1/2" NPTF
Delivery Ports: 3/8" NPTF
Part No. 110410
RELAY EMERGENCY VALVE
4 Delivery Ports
The Original "Quick Fix"
Nipple mounted.
Crack Pressure 1.5 PSI.
1
/4" NPTF
Control Port:
Reservoir Port: 1/2" NPTF
Emerg.-Supply: 1/4" NPTF
Delivery Ports: 1/4" NPTF
Part No. A1000S
HEAVY DUTY
CHARGING RELAY
MOUNTING NIPPLES
EMERGENCY VALVE
Straight nipple
Serv-Control Port (2): 3/8" NPTF
1
/2" NPT, 15/8" long
Emerg.-Supply Port: 3/8" NPTF
NON-CHARGING
3
Part
No. 6002S
Reservoir Port:
/4 " NPTF
RELAY EMERGENCY VALVE
3
Delivery Ports (4):
/8" NPTF
3
Commonly used on converter
/4" NPT, 15/8" long
Cracking Pressure 4.5 PSI
dollies, turntable axles, and air
Part No. 6006
Part No. 110470 Service
lift axles with service brake
chambers.
Reducing Nipple
QUICK FIX SERVICE:
3
/4" to 1/2" NPT, 15/8" long.
Serv-Control Port (2): 3/8" NPTF
PLUG UNIT ASS'Y
3
Part No. 110143
Part No. 6003
Emerg.-Supply Port: /8" NPTF
3
Reservoir Port:
/4 " NPTF
3
Mounting Nipple
Supply-Out Port:
/8" NPTF
for A1000S
3
Delivery Ports (4):
/8" NPTF
Part No. 616
Cracking Pressure 4.5 PSI
Reservoir
Part NO. 110338X
Note: Some valves available remanufactured
Delivery
TRAILER VALVES
FF2 FULL FUNCTION TRAILER VALVE
Replaces 2 and 3 valve multifunction trailer air brake systems by providing:
•Trailer spring brake control. •Pressure protection with one-way check.
•Trailer service relay. •Fully complies with FMVSS-121 trailer regulations, for spring
brake control and other requirements
Single valve for tandem axle:
•1 or 2 reservoir systems •Protects supply to 70 PSI; no dragging spring brakes with
70 PSI or higher supply line. •3 second spring brake apply
•Service brake functions •Anti-compounding
SPRING SERVICE
CRACK
PART NO. PRESSURE RESERVOIR CONTROL SUPPLY BRAKE BRAKE
3
1
3
3
3
Heavy steel walled pipe nipple
KN28600
3 PSI
/4"
/4"
/8"
/8"
/8"
included with each valve, conforming
1
1
3
3
3
KN28601
3
PSI
/
/
/
/
/8"
2"
4"
8"
8"
to NFPA/T3.8.3 R2-1977 standard.
3
1
3
3
3
SPECIAL KN28602* 5 PSI
/4"
/4"
/8"
/8"
/8"
1
1
3
3
3
ORDER KN28603* 5 PSI
/2"
/4"
/8"
/8"
/8"
Supply
B
Supply
A
Trailer
Control
Reservoir
B
Reservoir
A
MULTIFUNCTION RT-4
TRAILER VALVES
Meets all FMVSS-121 trailer requirements for spring brake
control and other regulations.
TRAILER
SUPPLY TRAILER RESERVOIR
PART NO. A B CONTROL A
B
3
1
3
KN26010 3/8" X
/8"
/2"
/8"
3
1
3
KN26020 X 3/8"
/8"
/2"
/8"
DEL'Y
(4)3/8"
(4)3/8"
PPV CLOSING
PRESSURE
70 PSI
70 PSI
18
LOW PRESSURE SWITCHES
LOW AIR SWITCH
Single Pole,
2 terminal Design
Circuit normally closed
at 0 PSI
1/8-27 Thread
Part No. BE13241
LP-3
LOW PRESSURE
INDICATOR
Single Terminal
Cut-out
"A"
Pressure Pipe
Part No.
PSI
Thread
1
104246
66±6
/4"
1
279416
60±6
/4"
1
279472
75±6
/4"
1
280530
70±6
/4"
1
289397
75±6
/8"
STOP LIGHT SWITCHES
SL-5
STOP LIGHT SWITCH
Part No.
286392
286404
Terminal
Thd. Size
#8-32
#10-32
TRACTOR
SPRING BRAKE CIRCUIT
LIGHT SWITCH
DS-2
DOUBLE CHECK VALVE & STOP
LIGHT SWITCH
Part No. A
286452 3/8"
286453 3/8"
B
/8"
3
/8"
3
SL-4
STOP LIGHT SWITCH
Part No. 274746
C
E
/8" #8-32
3
/8" #10-32
3
SERVICE CIRCUIT
STOP LIGHT SWITCH
TRAILER EMERGENCY STOP
LIGHT SWITCH
Actuates at 55 PSI. Single pole,
double throw, 3 terminal
design. Circuits are normally one
open, one closed.
Part No. BE13255
Actuates at 55 PSI.
Single pole, 2 terminal design.
Circuit normally closed at 0 PSI.
Part No. BE13240
STOP LIGHT SWITCH
Part No. 8100
#8-32
Reverse Polarity
1
/4" NPTF
Actuates at 3 - 5 PSI.
Single pole, 2 terminal design.
Circuit normally open at 0 PSI.
Solid state contacts.
Part No. BE13250
STOP LIGHT SWITCH
Meets the requirements of DOT121.
Brass body with silver and cadmium
contacts for long life and low voltage
drop. Rated at full 24 amp load.
1/4 - 18 NPTF.
Part No. 1013250
19
SHUT OFF VALVES / DRAIN VALVES
SHUT OFF VALVE
Ball type valve with
1/2" NPTF both ends.
Working pressure 150 PSI.
Part No. 12116
DRAIN VALVES
WITH CABLE
Use on wet or dry tanks. 1/4" NPTF.
Brass body with stainless spring.
Nylon coated stainless cable.
4' Cable
Part No. FC12104
5' Cable
Part No. FC12105
EXTERNAL SEAT DRAIN COCK
NPTF
1
/8"
1
/4"
3
/8"
1
/2"
Part No.
DC604-2
DC604-4
DC604-6
DC604-8
DRAIN VALVES
WITH CABLE
Use on wet or dry tanks.
1/4" NPTF. Nylon coated
stainless cable.
4' Cable:
Part No. 12104
5' Cable:
Part No. 12105
DRAIN COCK
NPTF Part No.
1
/4" DC601-4
3
/8" DC601-6
1
/2" DC601-8
DRAIN COCK
NPTF Part No.
1
/8" DC603-2
1
/4" DC603-4
3
/8" DC603-6
DRAIN VALVES, AUTOMATIC
Mounted to side or bottom of wet
tank. Functions when pressure
varies in air tank. 5 Foot cable.
1/4" NPTF Threads
Non-Heated.
Part No. KN24000
DRAIN COCK
NPTF Part No.
1
/4"
DCR601-4
TRUCK VALVES
Part
No.
V402P-2-2
V402P-4-4
V402P-6-6
GROUND PLUG
SHUT OFF COCK
Female Pipe
To
Male Pipe
Female Pipe Male Pipe
Thread
1/8"
1/4"
3/8"
Thread
1/8"
1/4"
3/8"
Hose Pipe
Part No.
I.D. Thread
V405P-6-6 3/8
3/8
V405P-6-8 3/8
1/2
V405P-8-8 1/2
1/2
Part
No.
SV404P-6-6
SV404P-10-6
SV404P-10-8
SV404P-12-6
SV404P-12-8
TRUCK VALVE
Female Pipe
to
Male Pipe
Part No.
V409F-8-6
V409F-8-8
V409F-10-8
V409F-12-8
Hose Pipe
I.D. Thread
3/8
3/8
5/8
3/8
5/8
1/2
3/4
3/8
3/4
1/2
Hose
Pipe
I.D. Thread
1/2
3/8
1/2
1/2
5/8
1/2
3/4
3/8
TRUCK VALVE
Hose
To
Male Pipe
TRUCK VALVE
Flare
To
Male Pipe
20
VALVE INTERCHANGE LISTS
COMPETITIVE TO SEALCO
Can Be Replaced By This
SEALCO Valve
THESE COMPETITIVE VALVES
Bendix
RE4
229434
277446
RE6
281865
281860
RE-6NC
102168
R-12P
109001
109002
R-8P
287114
SR-2
287375
287376
SR-4*
101112*
101121*
101622*
Berg
11675
12350
Haldex
KN3000
KN30010
N-3714J
KN30100
KN30300
KN30400
KN30200
Sealco
KN28300
3100
110268
KN28300
12360
12361
110147
RT-4
KN26010
AF-88802
AF-88812
RT-2
A-98730
A-99370
AE-83336
AE-83335
RT-4
KN26000
SR-5
065437
065438
065439
065440
R-12
103009
R-12
102626
065104
R-6
279952
R-5
229467
R-6
279180
R-8
286370
R-12
102626
Wagner
AF-71890
A-99036
12346
12341
KN28510
110197
AE-78889
A-80070
12345
12343
A-103600
A-86477
110139
110450
110600
A-85490*
A-97600*
12344
KN28060
9125
AE-78880
AE-78887
AE-78889
KN28500
KN28510
KN28520
A1000S
110200
110205
110460
110470
110475
110338
110338
110580
110580
110580
110570
110570
110170
110170
110170
110170
110170
110170
110170
110171
110171
110171
110191
110191
110191
110191
110191
110500
110500
110500
110500
110500
110410
110410
110410
110415
110415
110415
110415
110415
110416
4 Delivery
or
110412
2 Delivery
21
VALVE INTERCHANGE LISTS
COMPETITIVE TO BENDIX
Bendix
R-1
R-1C
R-5
R-6
R-8
R-12
R-12H
R-14
R-14H
RE-1C
RE-4
RE-6
SR-1
SR-2
SR-4
To
Bendix
103009
103009
102626, 103009
102626, 103009
103010
102626
103009
103028
103010
229434
229434
281865
286364
287376
101112
Berg
12340
12341
12342
12343
12344
12345
12346
12352
12360
A86473
A86477
Haldex
A104001
A104002
A104003
A104010
KN20541
To
Bendix
103009
103009
102626, 103009
102626, 103009
102626, 103009
102626, 103009
103009
101112 & 102626
101112, 101622
102626
102626
To
Bendix
101112, 101622
101112, 101622
101112, 101622
101112, 101622
101112, 101622
Haldex
KN28060
KN28061
KN28071
KN28132
KN28140
Sealco
9125
A1100
Wagner
A78882
A78887
A88802
A88812
A98730
A98731
A98732
To
Bendix
103009
103009
103010
103009
103010
To
Bendix
102626, 103009
102626
To
Bendix
102626, 103009
102626, 103009
101112, 101622
101112, 101622
101112, 101622
101112, 101622
101112, 101622
COMPETITIVE TO HALDEX
Bendix
Part No.
SR2
SR4
R6
R10
R12
R12H
R14
Can be
Haldex
Replaced by
Part No.
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
A103600 or A86477
A103600 or A86477
A103600 or A86477
KN28550
A103600 or A86477
Midland
12360
KN28160
KN28500
KN28520
Midland-Grau
KN26000/KN26010/KN26020
KN28550
KN28550
KN28550
Berg
12343
12345
11661
12343
12346
Midland-Grau
A103600 or A86477
A103600 or A86477
A103600 or A86477
A103600 or A86477
KN28550
Sealco
A1100
110139
110147
110171
110180
110190
110197
110230
3100
9125
Haldex
A103600 or A86477
A103600 or A86477
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
KN28550
KN26000/KN26010/KN26020
KN28550
KN28550
Wagner
A80070
A88802
A88812
A83335
A83336
Haldex
KN28550
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
KN26000/KN26010/KN26020
22
FLEETCRAFT VALVES
VALVES
FC28600
FC28601
FC28500
FC28510
FC28520
FC26000
FC2103028
FC065104
FC065437
FC102626
FC103009
FC103010
FC281865
FC103081
FC229635
FC18530
FC276566
FC276567
FC286171
FC288239
FC289714
FC950011
FC800372 & FC800373
FC54007
FC12104 & FC12105
**ONE YEAR WARRANTY**
**ALL VALVES NEW OUTRIGHT**
23
FLEETCRAFT VALVES
VALVES
Fleetcraft Part Number
FC18530
FC28500
FC28510
FC28520
FC28600
FC28601
FC26000
FC065104
FC065437
FC102626
FC103009
FC103010
FC103028
FC103081
FC229635
FC276566
FC276567
FC281865
FC286171
FC288239
FC289714
FC950011
FC800372
FC800373
FC54007
FC229859
FC229860
FC12104
FC12105
**ONE YEAR WARRANTY**
** ALL VALVES NEW OUTRIGHT**
Description
D2 Governor
RG2 Valve
RG2 Valve
RG2 Valve
FF Valve, 3/4 port
FF Valve, 1/2 port
RT4 Valve
R-12 Valve
SR-5 Valve
R-12 Valve
R-12 Valve
R-14 Valve (Horizontal)
R-14 Valve (Vertical)
R-7 Valve
TW1 Valve
PP1 Valve (20 psi)
PP1 Valve (40 psi)
RE-6 Valve
E-6
PP7
QR DBL Check
Meritor Cartridge 1200
Check Valve
Check Valve
Leveling Valve
QR Valve (3/8 - 3/8)
QR Valve (1/2 - 1/2)
1/4” Drain valve - 4’ cable
1/4” Drain Valve - 5’ cable
24
VELVAC AIR VALVES
Four-Way Push/Pull Valves
Part No. 320121 - Two Position Valve
Part No. 320122 - Three Position, Holding Type Valve
•
•
•
•
Four-Way Electronic Solenoid Valve
Part No. 320131
Features newly designed orifice area increasing airflow
Manual override switch for manual operation
(3) 9/32" dia. valve body mounting holes, (5) 1/4"-18 FPT ports
Exhaust cone filters included
The "Viper"
Part No. 320124
• Compact, high flow valve provides flow performance
comparable to larger valves
• One piece stainless steel shaft
• Can be mounted using (2) 3/16" dia. body mounting holes
or through a 1/2" dia. through hole.
• (3) 1/8" NPT ports and (2) 10-32 exhaust ports
• Includes pull to open/push to close faceplate
Four-Way Rotary Handle Valve
Part No. 320123
•
•
Includes solid one-piece knob and TWO faceplates
(Raise/Lower & Open/Close)
(3) 1/4"-18 FPT ports
HYDRAULIC BRAKE WHEEL CYLINDERS
Single End Cylinder
Typical Double End, Straight or Step Bored
Piston
Cup
Double-Ended
Wheel Cylinder uses two
cups, pistons, and dust boots
with the same size bore.
Piston Cup
Root
Spring
Spring
Single-Ended
Wheel Cylinder uses one cup,
piston, and dust boot.
Root
Bleeder Screw
Part No.
E-5170
E-5178
E-5179
E-5407
E-5407
E-5408
E-5413
E-5414
Description
Single RH Wheel Cylinder, Upper & Lower
Single LH Wheel Cylinder, Upper
Single LH Wheel Cylinder, Upper & Lower
Single LH Wheel Cylinder
Single LH Reman Wheel Cylinder
Single RH Wheel Cylinder
LH Expander Wheel Cylinder
RH Expander Wheel Cylinder
Part No.
033314
033321
033338
033400
033581
033582
033708
033709
Description
LH Wheel Cylinder Assy
RH Wheel Cylinder Assy
Wheel Cylinder
Wheel Cylinder
Wheel Cylinder
Wheel Cylinder
Wheel Cylinder Assy
Wheel Cylinder Assy
25
VELVAC AIR CYLINDERS
•
•
•
•
Stainless steel cylinder shaft provides excellent corrosion resistance and extended cycle life.
Lightweight, corrosion resistent, aluminum cylinder tube with die cast aluminum end caps.
Rear Clevis cast as integral part of the cover for improved durability and mounting integrity.
Double acting, Emralon-coated piston cup assures smooth, long lasting operation
even in cold weather conditions.
• Front end cap assembly includes pressure seal, dirt seal and oil impregnated bronze bushng.
• Cylinder tube is imprinted with part number and date code for quick identification.
• ALL cylinders are factory pressure and leak tested prior to shipping.
Part No. 100122
Air Cylinder - 2-1/2" I.D. x 4" Stroke. Cylinder Type: Push / Pull; Retracted Length: 9.37"
Part No. 100123
Air Cylinder - 2-1/2" I.D. x 6" Stroke. Cylinder Type: Push / Pull; Retracted Length: 11.37"
Part No. 100124
Air Cylinder - 2-1/2" I.D. x 8" Stroke. Cylinder Type: Push / Pull; Retracted Length: 13.37"
Part No. 100125
Air Cylinder - 2-1/2" I.D. x 4" Stroke. Cylinder Type: Spring Return (Norm. Ext.);
Part No. 100126
Air Cylinder - 2-1/2" I.D. x 6" Stroke. Cylinder Type: Spring Return (Norm. Ret.);
Part No. 100131
Air Cylinder - 3-1/2" I.D. x 6" Stroke. Cylinder Type: Push / Pull; Retracted Length: 13.60"
Part No. 100132
Air Cylinder - 3-1/2" I.D. x 8" Stroke. Cylinder Type: Push / Pull; Retracted Length: 15.60"
Part No. 100133
Air Cylinder - 2-1/2" I.D. x 6" Stroke. Cylinder Type: Spring Return (Norm. Ext.);
Part No. 100136
Air Cylinder - 3-1/2" I.D. x 8" Stroke. Cylinder Type: Push / Pull; Retracted Length: 18.35"
Part No. 100137
Air Cylinder - 3-1/2" I.D. x 8" Stroke. Cylinder Type: Push / Pull; Retracted Length: 15.60"
Part No. 100143
Air Cylinder - 3-1/2" I.D. x 8" Stroke. Features: Perpendicular Ports; Cylinder Type: Push / Pull
26
ABS GENERAL INFORMATION
General Air Brake Requirements
Basic design requirements for trailer air
brake systems are set forth in FMVSS121. FMVSS-121 covers requirements
for new construction. Once put into
operation, the trailer's brake systems
must be maintained in accord with the
following FHWA/OMC standards:
FMCSR 393 - Covers required
equipment
FMCSR 396 - Covers inspection
and repair
SYSTEM APPLICATION CHART
SIDE
AXLE
CONTROL CONTROL
Trailer Type
2S/1M
2S/2M
1
or
1
1
or
1
or
1
or
4S/2M
1
1
Air Timing Requirements
FMVSS-121 specifies the maximum
times that are permitted for application
and release of brake chamber pressure.
ABS equipped trailers must meet the
same air timing requirements as prior,
non-ABS equipped trailers.
Reservoirs
Trailers must be equipped with air
reservoirs that provide a volume of air
eight times that of the service brake
chambers.
A type 30 air chamber has an effective
surface area of 30 square inches. For
short stroke type 30 air chambers, the
volume is typically 89 CID. For a
typical two axle trailer, the minimum
required volume is therefore 2848 CID.
Reservoir size requirements for nonABS and ABS equipped systems are
the same.
4S/2M
or
1
or
2
or
1
1
1
1
2
or
2
2
or
2
2
or
2
or
2
1
or
1
1
or
1
or
1
2
and
1
2
and
1
Trailer ABS Configurations
1
or
1
Application Recommendations
Refer to the chart on this page to
determine a recommended ABS
installation for your application.
1
or
1
1
2
or
2
1
Non-Lift Axles
Lift Axle
1
1
Sensor Placement
When more than one wheel is controlled by a single valve, sensors should
be mounted at the axle which tends to lock first. For spring suspensions
this is usually the forward axle. For air suspensions this is usually the
rear most axle.
27
ABS ELECTRIC CONFIGURATION - 2S/1M - HALDEX COMPONENTS
Kit Part No. AQ960804
Kit Part No. AQ961404
PARTS LIST Consisting of:
Qty
Part No.
Description
1
AL919310
ECU
1
AL430624
Full Function ABS
Valve
2
AL919804
7.5' Sensor Cable Ext
1
AL918600
60' Power Cord
1 box
Tie Down Clips
PARTS LIST Consisting of:
Qty
Part No.
Description
1
AL919310
ECU
1
AL430624
Full Function ABS
Valve
2
AL919804
7.5' Sensor Cable Ext
1
AL919901
12' Power Cord Ext
1 box
Tie Down Clips
ABS AIR CONFIGURATION - 2S/1M FFABS
ABS AIR CONFIGURATION - UNIVERSAL 2S/1M REPLACEMENT KIT
The AQ960503 Universal PLC Select ABS Kit will replace all competitive brands and generations of trailer 2S/1M (2
Sensor - One Modulator Valve) ABS systems. These are any systems that utilize a single ABS valve, two sensors,
and a separate spring brake control valve. Some additional components unique to the vehicle being upgraded should
be expected. Do not use this kit to replace the Haldex FFABS ABS System as this is a single valve per vehicle and
spring brake control is integral to the FFABS valve.
Kit Part No. AQ960503
PARTS LIST Consisting of:
Qty
Description
1
PLC Select Valve ECU Assy. 6 Port
1
6 Foot Power Cord Ext.
2
18 Inch Sensor Extensions
1
Installation Instructions L31203
1
PLC Service Manual L30030
28
ABS ELECTRICAL CONFIGURATION - 4S/2M - COMPONENTS
Kit Part No. AQ961002
PARTS LIST Consisting of
Qty
Part No.
Description
1
1
AL919311
AL430624
2
2
1
1
1
1 box
AL919802
AL919804
AL918600
AL364040
AL40900
-
ECU
Full Function ABS
Valve
4.5' Sensor Cable Ext.
7.5' Sensor Cable Ext.
60' Power Cord
Modulator Valve
Loom Assembly
Tie Down Clips
Kit Part No. AQ961605
PARTS LIST Consisting of:
Qty
Part No.
Description
1
1
AL919311
AL430624
2
2
1
1
1
1 box
AL919802
AL919804
AL919901
AL364040
AL40900
-
ECU
Full Function ABS
Valve
4.5' Sensor Cable Ext.
7.5' Sensor Cable Ext.
12' Power Cord Ext.
Modulator Valve
Loom Assembly
Tie Down Clips
ABS AIR CONFIGURATION - 4S/2M FFABS
29
ABS ELECTRIC CONFIGURATION - 2S/1M - MERITOR/WABCO COMPONENTS
2 Sensor/1 Modulator Valve
(2S/1M) Configuration Shown
Suggested Electrical Diagram
Tandem Suspension,
Two Wheels Sensed
Kits are now PLC
Enhanced Easy Stop
and available to OEM
Manufacturers ONLY
SEE PAGES FOLLOWING.
Curbside
Sensor
Ground (White)
KIT PART NO. 1542014
Power Supply 1 (Blue)
Power Supply 2 (Red)
REPLACEMENT PARTS LIST
Qty
1
1
2
1
1
Part No.
4005001010
4493260300
4497130180
-----
Description
ECU
10 ' Power cable
6' Sensor Ext cable
Installation Guide
End of Line Test
Power Cable
Trailer
Warning
Lamp
(Green/White)
Roadside
Sensor
Trailer ABS Warning
Lamp
Enhanced Easy-Stop™
SUGGESTED ABS AIR CONFIGURATION - 2S/1M
TO FINISH THE AIR BRAKE AFTER ABS.
Valves & Tanks
Qty Part No.
Description
1
110500
Sprg brake c'trol valve
1
6003
Valve mount'g nipple
2
1010330
Air Tank
Air Hoses, 3/8" Diameter, 3/8" Fittings
4
16628
Hose ass'y, 28" long
4
16648
Hose ass'y, 48" long
Gladhands & Misc. Fittings
1
1011451
Emerg. gladhand
1
1011452
Service gladhand
6
1010403
Hose separator
2
11304
Frame coupling
2
68NTA-6-6
Female connector
4
269NTA-6-6
Fitting
3
218P-12
3/4" hex head plug
2
218P-6
3/8" hex head plug
2
269-NTA-6-4 Fitting
2
264NTA-6
Fitting
8
3/8"-24x11/4" Cap screw
8
3/8"-24
Lock nut
8
3/8"
Lock washer
4
HT-1068
Tank cushion pads
2
DC604-4
Tank drain valve
8
1011123
1/2" tube clamp
8
#10
Metal screw1
2
6006
3/4" X 3/4" Hex Nipple
1 TL30257Y
Marker light
1 TL52200
Light pigtail
1 TP95172
ABS Label For Lamp
Air System Configuration
2S/1M Configuration Shown
(2 Sensor/1 Modulator)
Service/Control
Emerg./Supply
Service/Control
Emergency/Supply
Service to Brakes
Emergency to Brakes
Optional:
1
15-961
Junction Box
30
ABS ELECTRIC CONFIGURATION - 2S/1M - MERITOR/WABCO COMPONENTS
2 Sensor/1 Modulator Valve
(2S/1M) Configuration Shown
Suggested Electrical Diagram
Tandem Suspension,
Two Wheels Sensed
Kits are now PLC
Enhanced Easy Stop
and available to OEM
Manufacturers ONLY
SEE PAGES FOLLOWING.
Curbside
Sensor
Ground (White)
KIT PART NO. 1542015
REPLACEMENT PARTS LIST FOR
Qty
1
1
1
2
Part No.
4005001010
PEC4-48
4493260050
4497130180
1
---
1
1
-----
Power Supply 1 (Blue)
Power Supply 2 (Red)
Description
ECU
48' Power Ext cable
1.6' Power Cable
6' Sensor
Ext.cable
ABS Label For
Lamp
Installation Guide
End of Line Test
Power Cable
Trailer
Warning
Lamp
(Green/White)
Roadside
Sensor
Trailer ABS Warning
Lamp
Enhanced Easy-Stop™
SUGGESTED ABS AIR CONFIGURATION - 2S/1M
TO FINISH THE AIR BRAKE AFTER ABS.
Valves & Tanks
Qty Part No.
Description
1
110500
Sprg brake c'trol valve
1
6003
Valve mount'g nipple
2
1010330
Air Tank
Air Hoses, 3/8" Diameter, 3/8" Fittings
4
16628
Hose ass'y, 28" long
4
16648
Hose ass'y, 48" long
Gladhands & Misc. Fittings
1
1011451
Emerg. gladhand
1
1011452
Service gladhand
6
1010403
Hose separator
2
11304
Frame coupling
2
68NTA-6-6
Female connector
4
269NTA-6-6
Fitting
3
218P-12
3/4" hex head plug
2
218P-6
3/8" hex head plug
2
269-NTA-6-4 Fitting
2
264NTA-6
Fitting
8
3/8"-24x11/4" Cap screw
8
3/8"-24
Lock nut
8
3/8"
Lock washer
4
HT-1068
Tank cushion pads
2
DC604-4
Tank drain valve
8
1011123
1/2" tube clamp
8
#10
Metal screw1
2
6006
3/4" X 3/4" Hex Nipple
1 TL30257Y
Marker light
1 TL52200
Light pigtail
Air System Configuration
2S/1M Configuration Shown
(2 Sensor/1 Modulator)
Service/Control
Emerg./Supply
Service/Control
Emergency/Supply
Service to Brakes
Emergency to Brakes
Optional:
1
15-961
Junction Box
31
ABS ELECTRIC CONFIGURATION - 2S/2M - MERITOR/WABCO COMPONENTS
2 Sensor/2 Modulator Valve
(2S/2M) Configuration Shown
Suggested Electrical Diagram
Tandem Suspension,
Two Wheels Sensed
Kits are now PLC
Enhanced Easy Stop
and available to OEM
Manufacturers ONLY
SEE PAGES FOLLOWING.
Curbside
Sensor
Ground (White)
KIT PART NO. 1542023
Power Supply 1 (Blue)
Power Supply 2 (Red)
REPLACEMENT PARTS LIST FOR
Qty
1
1
1
2
1
1
1
Part No.
4005001020
PEC4-48
4493260050
4497130300
-------
Description
ECU
48' Power Ext Cable
1.6' Power Cable
10' Sensor Ext Cable
Power Cable
Trailer
Warning
Lamp
(Green/White)
ABS Label For Lamp
Installation Guide
End of Line Test
Roadside
Sensor
Trailer ABS Warning
Lamp
Enhanced Easy-Stop™
SUGGESTED ABS AIR CONFIGURATION - 2S/2M
TO FINISH THE AIR BRAKE AFTER ABS.
Valves & Tanks
Qty Part No.
Description
1
110500
Sprg brake c'trol valve
1
6003
Valve mount'g nipple
2
1010330
Air Tank
Air Hoses, 3/8" Diameter, 3/8" Fittings
4
16628
Hose ass'y, 28" long
4
16648
Hose ass'y, 48" long
Gladhands & Misc. Fittings
1
1011451
Emerg. gladhand
1
1011452
Service gladhand
6
1010403
Hose separator
2
11304
Frame coupling
2
68NTA-6-6
Female connector
4
269NTA-6-6
Fitting
3
218P-12
3/4" hex head plug
2
218P-6
3/8" hex head plug
2
269-NTA-6-4 Fitting
2
264NTA-6
Fitting
8
3/8"-24x11/4" Cap screw
8
3/8"-24
Lock nut
8
3/8"
Lock washer
4
HT-1068
Tank cushion pads
2
DC604-4
Tank drain valve
8
1011123
1/2" tube clamp
8
#10
Metal screw
2
6006
3/4" X 3/4" Hex Nipple
1 TL30257Y
Marker light
1 TL52200
Light pigtail
Service/Control
Emerg./Supply
Service/Control
Emergency/Supply
Service to Brakes
Emergency to Brakes
Optional:
1 15-961
Junction Box
32
ABS ELECTRIC CONFIGURATION - 4S/2M - MERITOR/WABCO COMPONENTS
4 Sensor/2 Modulator Valve
(4S/2M) Configuration Shown
Suggested Electrical Diagram
Tandem Suspension,
Four Wheels Sensed
Kits are now PLC
Enhanced Easy Stop
and available to OEM
Manufacturers ONLY
SEE PAGES FOLLOWING.
Curbside
Sensor
KIT PART NO. 1544023
Ground (White)
Power Supply 1 (Blue)
REPLACEMENT PARTS LIST
Qty
1
1
1
4
1
1
1
Part No.
4005001030
PEC4-48
4493260050
4497130180
-------
Power Supply 2 (Red)
Description
ECU
48' Power Ext Cable
1.6' Power Cable
6' Sensor Ext cable
ABS Label For Lamp
Installation Guide
End of Line Test
Power Cable
Trailer
Warning
Lamp
(Green/White)
Enhanced Easy-Stop™
Roadside
Sensor
Trailer ABS Warning Lamp
SUGGESTED ABS AIR CONFIGURATION - 4S/2M
TO FINISH THE AIR BRAKE AFTER ABS.
Valves & Tanks
Qty Part No.
Description
1
110500
Sprg. brake c'trol valve
1
6003
Valve mount'g nipple
2
1010330
Air Tank
Air Hoses, 3/8" Diameter, 3/8" Fittings
4
16628
Hose ass'y, 28" long
Service/Control
4
16648
Hose ass'y, 48" long
Gladhands & Misc. Fittings
1
1011451
Emerg. gladhand
1
1011452
Service gladhand
6
1010403
Hose separator
2
11304
Frame coupling
2
68NTA-6-6
Female connector
4
269NTA-6-6
Fitting
3
218P-12
3/4" hex head plug
2
218P-6
3/8" hex head plug
2
269-NTA-6-4 Fitting
2
264NTA-6
Fitting
8
3/8"-24x11/4" Cap screw
8
3/8"-24
Lock nut
Emerg./Supply
8
3/8"
Lock washer
4
HT-1068
Tank cushion pads
Service/Control
2
DC604-4
Tank drain valve
Emergency/Supply
8
1011123
1/2" tube clamp
Service to Brakes
8
#10
Metal screw
Emergency to Brakes
2
6006
3/4" X 3/4" Hex Nipple
Optional:
1 TL30257Y
Marker light
1 15-961
Junction Box
1 TL52200
Light pigtail
33
ABS ELECTRIC CONFIGURATION - 4S/2M - MERITOR/WABCO COMPONENTS
4 Sensor/2 Modulator Valve
(4S/2M) Configuration Shown
Suggested Electrical Diagram
Tandem Suspension,
Four Wheels Sensed
Kits are now PLC
Enhanced Easy Stop
and available to OEM
Manufacturers ONLY
SEE PAGES FOLLOWING.
Curbside
Sensor
Ground (White)
KIT PART NO. 1544222
Power Supply 1 (Blue)
Power Supply 2 (Red)
REPLACEMENT PARTS LIST
Qty
1
1
4
1
1
1
Part No.
4005001030
4493260300
4497130300
-------
Description
ECU
Power Cable 10 ft
10' Sensor Ext Cable
ABS Label For Lamp
Installation Guide
End of Line Test
Power Cable
Trailer
Warning
Lamp
(Green/White)
Roadside
Sensor
Trailer ABS Warning Lamp
Enhanced Easy-Stop™
SUGGESTED ABS AIR CONFIGURATION - 4S/2M
TO FINISH THE AIR BRAKE AFTER ABS.
Valves & Tanks
Qty Part No.
Description
1
110500
Sprg. brake c'trol valve
1
6003
Valve mount'g nipple
2
1010330
Air Tank
Air Hoses, 3/8" Diameter, 3/8" Fittings
4
16628
Hose ass'y, 28" long
Service/Control
4
16648
Hose ass'y, 48" long
Gladhands & Misc. Fittings
1
1011451
Emerg. gladhand
1
1011452
Service gladhand
6
1010403
Hose separator
2
11304
Frame coupling
2
68NTA-6-6
Female connector
4
269NTA-6-6
Fitting
3
218P-12
3/4" hex head plug
2
218P-6
3/8" hex head plug
2
269-NTA-6-4 Fitting
2
264NTA-6
Fitting
8
3/8"-24x11/4" Cap screw
8
3/8"-24
Lock nut
Emerg./Supply
8
3/8"
Lock washer
4
HT-1068
Tank cushion pads
Service/Control
2
DC604-4
Tank drain valve
Emergency/Supply
8
1011123
1/2" tube clamp
Service to Brakes
8
#10
Metal screw
Emergency to Brakes
2
6006
3/4" X 3/4" Hex Nipple
Optional:
1 TL30257Y
Marker light
1 TL52200
Light pigtail
1 15-961
Junction Box
34
ABS ELECTRIC CONFIGURATION - 4S/2M - MERITOR/WABCO COMPONENTS
4 Sensor/2 Modulator Valve
(4S/2M) Configuration Shown
Suggested Electrical Diagram
Tandem Suspension,
Four Wheels Sensed
Kits are now PLC
Enhanced Easy Stop
and available to OEM
Manufacturers ONLY
SEE PAGES FOLLOWING.
Curbside
Sensor
Ground (White)
KIT PART NO. 1544223
REPLACEMENT PARTS LIST
Qty
1
1
2
2
1
1
1
Part No.
4005001030
4493260300
4497130300
4497130180
-------
Description
ECU
10' Power Cable
10' Sensor Ext cable
6' Sensor Ext cable
ABS Label For Lamp
Installation Guide
End of Line Test
Power Supply 1 (Blue)
Power Supply 2 (Red)
Power Cable
Trailer
Warning
Lamp
(Green/White)
Roadside
Sensor
Trailer ABS Warning Lamp
Enhanced Easy-Stop™
SUGGESTED ABS AIR CONFIGURATION - 4S/2M
TO FINISH THE AIR BRAKE AFTER ABS.
Valves & Tanks
Qty Part No.
Description
1
110500
Sprg. brake c'trol valve
1
6003
Valve mount'g nipple
2
1010330
Air Tank
Air Hoses, 3/8" Diameter, 3/8" Fittings
4
16628
Hose ass'y, 28" long
4
16648
Hose ass'y, 48" long
Service/Control
Gladhands & Misc. Fittings
1
1011451
Emerg. gladhand
1
1011452
Service gladhand
6
1010403
Hose separator
2
11304
Frame coupling
2
68NTA-6-6
Female connector
4
269NTA-6-6
Fitting
3
218P-12
3/4" hex head plug
2
218P-6
3/8" hex head plug
2
269-NTA-6-4 Fitting
2
264NTA-6
Fitting
8
3/8"-24x11/4" Cap screw
8
3/8"-24
Lock nut
8
3/8"
Lock washer
Emerg./Supply
4
HT-1068
Tank cushion pads
Service/Control
2
DC604-4
Tank drain valve
Emergency/Supply
8
1011123
1/2" tube clamp
8
#10
Metal screw
Service to Brakes
2
6006
3/4" X 3/4" Hex Nipple
Optional:
1 TL30257Y
Marker light
1 15-961
Junction Box
1 TL52200
Light pigtail
35
EASYSTOP™ TO ENHANCED EASYSTOP™ CONVERSION KITS
Differences Between Easy-Stop
and Enhanced Easy-Stop 2S/2M,
4S/2M and 4S/3M
There are some changes to Enhanced Easy-Stop
that you need to be aware of before you begin the
installation:
• Enhanced Easy-Stop includes Power Line
Communication (PLC) function.
• The ECU/dual modulator valve assembly must
be mounted as one unit.
• The LED on top of the ECU has been eliminated.
• Blink Code Diagnostics through external
or ABS indicator lamp.
Differences Between Easy-Stop
and Enhanced Easy-Stop
2S/1M Basic
There are some changes to Enhanced Easy-Stop
that you need to be aware of before you begin the
installation:
• Enhanced Easy-Stop includes Power Line
Communication (PLC) function.
• The ECU/single modulator valve assembly may
be mounted as one unit or the ECU and the
valve may be mounted or serviced separately.
• The assembly is shipped with valve cable
between the ECU and valve disconnected from
the ECU.
• The LED on top of the ECU has been eliminated.
• Blink Code Diagnostics through external
or ABS indicator lamp.
• The control port on the Enhanced Easy-Stop
single modulator valve is 3/8-inch — on
previous versions it was 1/4-inch.
R955320
4S/2M ECU plus
old style/new style power cord
adapter--no diagnostic cable.
R955321
4S/2M ECU plus
old style/new style power cord
adapter--with diagnostic "Y" cable.
R955322
ECU/Modulator Valve Assembly,
2S/1M. DOLLY USE ONLY
R955344
2S/1M ECU plus
old style/new style power cord
adapter with power line adapter
for trailer applications.
36
MERITOR WABCO ABS ENHANCED EASYSTOP™ CONVERSION KITS
Meritor WABCO 2S/2M and 4S/2M Enhanced
Easy-Stop™ Replacement Kit for ECU/Modulator
Valve Assembly with external diagnostics "Y" cable
Part No. R955321
Meritor WABCO Enhanced Easy-Stop™ Trailer ABS
Replacement Kits for Easy-Stop™ ECU/Modulator
Valve Assembly, 2S/1M, with power line adapter.
For Trailer Applications Only (NO Dolly)
Replaces Meritor Part No. 4725000110,4725000210.
Part No. R955344
Meritor/WABCO ECU/Valves
Application: Use on 2S/1M,2S/2M & 4S/2M
systems without external diagnostic cable.
Part No. R955320
Meritor WABCO Enhanced Easy-Stop™ Trailer ABS
Replacement Kits for Easy-Stop™ ECU/Modulator
Valve Assembly, 2S/1M.
DOLLY USE ONLY
Replaces Meritor Part No. 4725000110
Part No. R955322
37
ENHANCED EASYSTOP™ PARTS STOCKED
(Add "S" to OE number for the aftermarket number)
PART NUMBER
DESCRIPTION
S4005001010
ECU Only
(figure 1)
S4005001030
ECU Only
(figure 2)
S4493260100
3.3 ' Power Cable
(figure 3)
S4493260300
10' Power Cable
(figure 3)
S4493260470
15.4' Power Cable
(figure 3)
S4493641500
13.1' / 9.8' Power "Y" Cable
(figure 4)
S4493641530
figure 1
figure 2
20' / 10' Power "Y" Cable
(figure 4)
figure 3
figure 4
Sensors and Sensor Extensions are Universal to Both Systems
38
MISCELLANEOUS EASYSTOP™ COMPONENTS
Meritor/WABCO
Part No.
Description
S4493151500 ABS Power Cable,
4 Cond.,15m (49 ft.)
Meritor/WABCO
Part No.
Description
SA13237L1130 ABS Diagnostic
(Pre-PLC)
Cable with Tool
Your Source
For Complete
1810000
1810002
1810003
1810001
ABS
Systems and Parts
Sensor Holder
(welded to axle spindle)
Meritor/WABCO
Part No.
Description
S8946049440 ABS Power Cable,
1m (39.37")
With industry
standard plug
Meritor Wabco ABS
Part No.
Description
R955212
ABS Relay Valve
Second modulator valve for use on
2S/2M and 4S/2M Systems
Haldex
Bendix
Meritor/WABCO
Part No.
Description
S4497130180 Sensor Extension
Cable, 1.78m (6 ft.)
S4497130300 Sensor Extension
Cable, 3.00m (10 ft.)
Common ABS Components
Part No. Description
1810000 Bendix (Eaton/Bosch) 1' Sensor
1810001 Friction Bushing
1810002 Meritor/Wabco 1' Sensor
1810003 Meritor/Wabco 3' Sensor
Right Angle (90°) Sensors
Part Number
Feet
Meters
R955342
6.6
2.0
39
MISCELLANEOUS HALDEX & BENDIX ABS COMPONENTS
Modular Valve
Part No. AL364040
FFABS Valve
Part No. AL430611
Number of Ports: 2
Mounting Port Size: 1/2 inch
Delivery Port Size: 3/8 inch
Mount: Reservoir
Application: 24mm 12 volt Solenoid
Number of Delivery Ports: 4
Delivery Ports Size: 3/8 inch
Pipe Thread: 1/2 inch NPT
ID Exhaust Cover: Black - Service
Brake Priority
Trailer ABS Modular Valve - Less ECU
• ECU and bracket may need to be
transferred from existing valve.
• 27mm, 12 volt valves require
A41111000 adapter ring and 24mm
replacement valve.
Trailer Service Brake Priority FFABS Valve
•ECU & bracket may need to be
transferred from existing valve.
•Use inlet filter A906960 in off-highway
applications.
Your Source
For Complete
Part No. AQ154113
Pin Measurements:
- Application/Notes:
Service As Assembly
Part No. AL430614
Number of Delivery Ports: 4
Delivery Ports Size: 3/8 inch
Pipe Thread: 3/4 inch NPT
ID Exhaust Cover: Black - Service
Brake Priority
Trailer Service Brake Priority FFABS Valve
• ECU & bracket may need to be
transferred from existing valve.
• Use inlet filter A906960 in offhighway applications.
Electronic Control Unit
Electronic Control Unit
Trailer ABS Modal ECU & Box
Assembly
• Power Cord Adapter AL914627.
• Pre-March 1998 Modal Systems
do not include interchange with
Post-March 1998 Systems.
FFABS Valve
Part No. AL919302
ABS
Systems and Parts
Meritor/WABCO
Haldex
Trailer ABS, MOD 1 ECU - SLH-A5-19 Pin
• OEM part no. is located on top of ECU.
• Post mandate ECU’s include bail latch.
Bendix
Pin Housing Dimensions:
3-1/2 inch Height x 5-3/8 inch Width
Application/Notes: 2 Keys -Diagonal
Loom Assembly
Relay Valve Cable Extension
Trailer ABS 2S/1M - Mod 1 - SLH-A5
or SLH-A8 - 19 Pin Loom Assembly
• 1.5 foot (0.5m) power cord adapter.
• OEM part number is locted on loom
decal
Trailer ABS Extension for Relay
Valve Cable Extension
• Cable includes 100317N junction
connector.
Bendix Pressure Modulator Valve
Part No. System
300073 Modular 12V ABS Valve
Length: 6 Feet (2M)
Part No. AL902104
Part No. AL919813
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement