Philips | 26MD251D | User manual | Philips 26MD251D User manual

User Manual
S M A R T. V E R Y S M A R T.
26MD/32MD251D LCD TV
WITH DVD PLAYER
Thank you for choosing Magnavox.
Need help fast?
Read your user Manual and/or
Quick-Use Guide first for quick tips
that make using your Magnavox
product more enjoyable.
If you have read your instructions and
still need assistance,
you may access our online help at:
www.usasupport.magnavox.com
or call
1-800-705-2000
while with your product
(and Model / Serial number)
Model No:
Serial No:
3138 155 24652
RETURN YOUR PRODUCT REGISTRATION CARD TODAY
TO GET THE VERY MOST FROM YOUR PURCHASE.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don’t miss
out. Complete and return your Product Registration Card at once to ensure:
*Proof of Purchase
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain
warranty service.
*Product Safety
Notification
*Additional Benefits of
Product Ownership
By registering your product, you’ll
receive notification directly from
the manufacturer - in the rare
case of a product recall or safety
defect.
Registering your product
guarantees that you’ll receive all
of the privileges to which you’re
entitled, including special
money-saving offers.
Know these safety symbols
Congratulations on your purchase,
and welcome to the “family!”
This “bolt of lightning” indicates
uninsulated material within your unit may
cause an electrical shock. For the safety of everyone in your household, please do not remove
product covering.
Dear MAGNAVOX product owner:
Thank you for your confidence in
MAGNAVOX.You’ve selected one of the
best-built, best-backed products available today.
We’ll do everything in our power to keep you
happy with your purchase for many years to come.
As a member of the MAGNAVOX “family,” you’re
entitled to protection by one of the most
comprehensive warranties and
outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll
receive all the information and special offers for
which you qualify, plus easy access to
accessories from our convenient home
shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome - and
thanks for investing in a MAGNAVOX product.
The “exclamation point” calls attention
to features for which you should read the
enclosed literature closely to
prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed
on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et
pousser jusqu’au fond.
P.S.To get the most from your MAGNAVOX
purchase, be sure to complete and return
your Warranty Registration Card at once.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No._______________________
Serial No. _______________________
Visit our World Wide Web Site at http://www.usasupport.magnavox.com
2
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12
13.
14.
15.
16.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings.
Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eiae.org
Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
17.
18.
19.
20.
21.
22.
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure damaged.
Tilt/Stability - All televisions must comply with
recommended international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
Power Lines - An outdoor antenna should be located away
from power lines.
Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure through openings.
Battery Usage CAUTION - To prevent battery leakage
that may result in bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
Example of Antenna Grounding as
per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
3
Precaution
ADDITIONAL SAFETY PRECAUTIONS
• ENSURE that LCD TV stand is tightened properly to the set (See Quick Guide) on the right way of tightening of
the screw of the stand to the set. Improper tightening of screw may render the set unsafe.
• If LCD TV is installed on the wall, installation should be carried out by qualified servicemen. Improper or incorrect
installation may render the set unsafe.
• Disconnect main plug when :
— cleaning the TV screen, never use abrasive cleaning agents.
— there is a lightning storm.
— the set is left unattended for a prolonged period of time.
• Do not shift or move the LCD TV around when it is powered on.
• Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects.
• When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or
other soft material like chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen.
These chemicals will cause damage to the surface.
• Wipe off water or saliva as soon as possible. These liquids can cause deformation and color fading of the
LCD screen when left exposed for some time.
• Be careful of condensation when temperature changes occur. Condensation can cause damage to the LCD
screen and electrically parts. After condensation fades, spots or blemishes will be present on the LCD screen.
DVD CARE
• Avoid high temperatures, moisture, water and dust
— Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or
direct sunlight.)
• Avoid condensation problem
— The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible
to play a disc. Leave the player in the warm environment until the moisture evaporates.
• Disc handling
— To clean a CD, wipe it in a straight line from the center towards the edge using a soft, lint-free cloth. A cleaning agent may
damage the disc!
— Write only on the printed side of a CDR(W) and only with a soft felt-tipped pen.
— Handle the disc by its edge, do not touch the surface.
POSITIONING THE LCD TELEVISION
• Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of
the LCD TV.
• Try to leave at least 6” of space around each side of the LCD TV cabinet to allow for proper ventilation.
• Do not place the LCD TV near a radiator or other sources of heat.
• Do not place the LCD TV where it can be exposed to rain or excessive moisture.
RECYCLING PROCEDURE/END OF LIFE DISPOSAL
• To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or
nickel cadmium. If possible, when disposing of batteries, use recycling means available in your area.
• The LCD TV uses materials that can be recycled. To minimize the amount of waste in the environment, check
your area for companies that will recover used televisions for dismantling and collection of reusable
materials, or contact your dealer for TV recycling tips.
• Please dispose of the carton and packing material through the proper waste disposal management in your
area.
4
Content
Help
If this instruction manual does not give an
answer or if ‘Trouble shooting tips’ does
not solve your TV problem, you can call
your Local Magnavox Customer or
Service Center.
Please, have the Model and Serial number
which you can find at the back of your
television set or on the packaging, ready,
before calling the Magnavox helpline
1-800-705-2000
Model: 26MD251D/32MD251D
Serial No:.............................................
Care of the screen See Tips, p. 43
Magnavox is paying a lot of attention to
producing environmentally-friendly in
product. Your new TV contains materials
which can be recycled and reused. At the
end of its life specialized companies can
dismantle the discarded TV to recycle the
reusable materials and to minimize the
amount of materials to be disposed of.
Please ensure you dispose of your old TV
according to local regulations.
Laser safety
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to service this device.
Welcome/registration of your TV . . . . . . . . . . . . . . . .2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . 3
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Use of the remote control . . . . . . . . . . . . . . . . . . . . . . .9
Buttons on the top of the TV . . . . . . . . . . . . . . . . . . . .12
Buttons on the DVD base . . . . . . . . . . . . . . . . . . . . . . .12
To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13
How to navigate through the Settings menu
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
14
Select the menu language
14
Store TV channels
Weak channel installation
15
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Preferences
16
19
Source
20
Clock
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Picture menu
21
23
Sound menu
24
Features menu
25
Channels menu
Integrated DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Getting started
29
29
Disc operations
32
System menu options
Connect accessory devices . . . . . . . . . . . . . . . . . . . . . 35
Recorder (vcr-dvd+rw)
35
Recorder and other A/V devices
36
36
Recorder and cable box with RF output
Satellite Receiver / cable box with AV outputs
36
Recorder and satellite Receiver / cable box with AV outputs
37
Digital Surround receiver
37
38
DVD Player or other accessory digital source devices
HDMI (High Definition Multimedia interface) connectors
39
39
Side connections
Record with your recorder. . . . . . . . . . . . . . . . . . . . . . 40
Record a TV program
40
To select connected devices. . . . . . . . . . . . . . . . . . . . .40
Regulatory
40
Trouble shooting tips . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Annex 1- Magnavox TV software upgrade with portable
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5
Preparation
1
Do not insert the power plug in a wall socket before
all connections are made.
Place the TV on a solid surface.
For ventilation, leave at least 4” to 6” free all around the TV.
Do not place the TV on a carpet. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be
placed in the vicinity. Avoid heat, direct sunlight and exposure to
rain or water. The equipment shall not be exposed to dripping
or splashing.
ANTENNA
2
ANTENNA
Basic connections to the TV
Your integrated digital TV automatically decodes and
displays the four basic DTV picture resolution standards.
- SDTV (Standard Definition TV) are broadcast as 480i
(480-line interlaced) or 480p (480-line progressive scan)
video.
- HDTV (High-Definition TV) are broadcast either in the
1080i or 720p formats, always with a widescreen picture.
Note: Progressive scan video (p) is more like that you see in a
movie theater. Images are much more distinct, free of flicker
and motion is smoother.
CABLE
CABLE
CABLE OR ANTENNA
CABLE OR ANTENNA
75
75
Your TV has an integrated HDTV tuner, which receives and
decodes terrestrial ATSC and unscrambled cable (QAM)
signals and displays them. There are two ways to obtain
HDTV content:
- through a cable provider
- through an antenna.
Note: Use the illustrations on the left for cable or Antenna
connections.
ANTENNA
ANTENNA
CABLE
HDMI 1
CABLE
HDMI 1
IN
TO TV
OUTPUT
OUT
3
CABLE OR ANTENNA
H DM I 2
CABLE OR ANTENNA
75
TO TV
OUTPUT
OUT
IN
H DM I 2
3
2
75
2
6
75
- Cable TV
Connect the cable TV signal to the CABLE/
jack at the bottom of the TV.
ANTENNA 75
See page 14 for details on using Autoprogram to store
channels in the TV’s memory.
Note: This connection will supply stereo sound to the TV if
the station you are viewing broadcasts stereo sound.
- Cable box with RF IN/OUT
ANTENNA
CABLE
HDMI 1
H DM I 2
CABLE OR ANTENNA
75
TO TV
OUTPUT
OUT
IN
2
3
• Connect the incoming cable TV signal to the cable IN
jack on the back of the cable box.
• Connect a coaxial cable (not supplied) from the TO TV
jack on the back of the cable box to the CABLE/
jack
at the bottom of the TV.
ANTENNA 75
Note: Your cable box may have a different label for the TO
TV jack. Commonly used labels include OUTPUT or OUT.
• Set the OUTPUT CH switch
on the cable box to CH
3 or 4 (whichever is correct for your cable box), Next,
tune the TV to the corresponding channel. Once
tuned,change channels using the cable box, not the TV.
Note: This connection will not supply stereo sound to the TV. The
reason is that the RF output on a cable box - labeled TO TV, OUT
or OUTPUT for example - will not send a stereo signal to the tuner
(VHF/UHF) input on a TV.
Cable box
- Cable box with A/V outputs
ANTENNA
Pr
Pb
Y
L
R
VIDEO
Pr
Pb
Y
L
R
VIDEO
L
HDMI
S-VIDEO
R
CABLE
CABLE OR ANTENNA
1
75
4
2
AV2:
L+R+VIDEO
SPLITTER
3
IN
OUT
Cable box
Note: Video In signal input can be handled by
AV2, AV3 as well.
Watching cable TV programs that don’t
require the use of a cable box.
Since you’ve connected the cable TV signal
directly to the TV’s tuner, you can also watch
unscrambled programs by simply tuning to
the desired channel; however, you must first use
Auto program to store available channels in the
TV’s memory. (p. 14)
Note: This connection will supply stereo sound to the
TV if the station you are viewing broadcasts stereo
sound.
• Connect the incoming cable TV signal to a signal
splitter (not supplied). The signal splitter enables you to avoid
having to use the TO TV jack on the back of the cable box.
This jack will not supply stereo sound to the TV.
Note: Your cable box may have a different label for the TO
TV jack. Commonly used labels include OUTPUT or OUT.
• Connect a coaxial cable (not supplied) to a connector on
the signal splitter and to the CABLE/ANTENNA 75
jack
on the TV.
• Connect another coaxial cable (not supplied) to a
connector on the signal splitter and to the cable IN jack
on the back of the cable box.
• Connect A/V cables (not supplied) to the VIDEO and
AUDIO L and R outputs on the back of the cable box
and to the AV2 video (labeled VIDEO) and AUDIO
on the back of the TV.
(labeled L and R) jacks
• To view programs from your cable box, first press the
SOURCE button on the remote control.
• Press the cursor down or up buttons until the AV2 signal
source is selected.
• Press the OK button to confirm your selection. The AV2
input source becomes current for the viewing of cable TV
programs through your cable box.
Note: If your cable box audio/video outputs do not supply
video and stereo audio to the TV, you will need to make the
connection shown above in “Cable box with RF IN/OUT.
7
- Cable box with S-Video, component video (YPbPr)
or HDMI connectors
ANTENNA
See Connect Accessory Devices, p. 35.
CABLE
- Antenna
Through an antenna, you can watch any HDTV programs
that are broadcast in your area without paying fees.
If you’re not sure what HDTV programming is available in
your area, contact your local content provider or your
local electronics retailer.
Broadcasters are currently transitioning from analog to digital
TV. This means that a given broadcaster will have two
channels on the air, one analog and one digital.
Connect the incoming antenna signal to the CABLE/
jack at the bottom of the TV.
ANTENNA 75
See page 14 for details on using Autoprogram to store
channels in the TV’s memory.
Note:This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
CABLE OR ANTENNA
75
- Direct Broadcast Satellite (DBS)
ANTENNA
CABLE
HDMI 1
IN
TO TV
OUTPUT
OUT
3
H DM I 2
CABLE OR ANTENNA
75
2
Satellite systems offer many of the same premium channels
available on cable systems, often at a lower price. To view
these channels, you’ll need to install a small dish antenna
outside your home.
The two main DBS systems, DirecTV and DishNetwork,
require separate, proprietary set-top receiver boxes to
decode their signals and send them to your digital TV set.
These boxes may include a digital TV tuner for off-air DTV
broadcasts.
Satellite broadcasters also provide major local
channels, depending on the market in which you live.
DBS also provides service in areas not covered by cable
because the are in rural areas or other areas not passed by a
cable line.
DBS also allows you to watch pay-per-view events.
Cable box
3 To connect accessory devices, see p. 35.
4 Refer to the bottom of the set for the correct operation
voltage.
Insert the power cord into the wall socket.
Consult your local dealer if your main power supply voltage is
different than that indicated for the TV. Never place the TV on
top of the (AC) cord. Placing the TV at top the AC cord could
cause a fire or electric shock.
5 Remote control:
Insert the two supplied AAA batteries.
The batteries supplied do not contain the heavy metals mercury
and cadmium. Please determine and comply with local
regulations when disposing of depleted batteries.
6 Turn the TV on:
Press the power switch at the front side of the TV. An
indicator on the front of the TV lights up.
Press the POWER buttons or the CH / button on the
remote control.
8
Use of the remote control -TV
Pressing some buttons once will activate the assigned function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.
The list will be removed automatically after six seconds or press OK to remove immediately.
POWER
Press to turn on/off the TV from or to standby
mode.
Note: The TV is never powered off
completely unless it is physically unplugged.
TV
To activate the RC for TV function.
Note: Press the TV button before you press
other TV fuction buttons.
SOURCE
Press this button repeatedly to select DVD
(AV1), AV2, AV3, HDMI, SIDE or TV when
in TV mode, according to where you connected the accessory devices (p. 35).
SLEEP
To activate the sleep timer function.
MUTE
Interrupt the sound or restore it.
A/CH
Press to alternate between the currently
viewed channel and the previously viewed
channel.
MENU
Settings menu on/off, see p. 13.
OK
- to activate a setting
- to display the list of channels stored
(according to the selecion made in the
Installation mode (Antenna or Cable),
p.14.
Channel selection
-To browse through the TV channels or
sources stored in the preferred channel list
(see p. 27).
-To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 14.
Note: You don’t have to start the installation
again once you have searched for and stored
the available TV channels.
Select an item in the menu.
VOL
Press
/ Volume
or to adjust the volume.
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
Type the dot for digital channels.
Smart Sound button
Press repeatedly to select among the four
settings; Personal, Speech, Music, Movies, or
Multimedia.
INFO button
Display information: Press to display
(when available) information about the
selected TV channel and program or
accessory device.
Smart Picture button
Press repeatedly to select among
Personal, Rich, Natural, Soft,
Multimedia or Eco picture settings.
VIEW
To display a list of all channels marked as
favorite (incl. subchannels).
To add or remove a channel in the favorite
list of TV channels.
9
FORMAT
Press this button to display a list of available display formats.
Available display formats are determined by the type of signal you
are receiving.
To choose the display format you prefer, press the FORMAT
button repeatedly: Formats:
Automatic, Super Zoom, 4:3, Movie expand
14:9, Movie expand 16:9, 16:9 subtitle and widescreen.
Automatic
Super zoom
4:3
Movie expand 16:9
16:9 subtitle
Widescreen
Movie expand 14:9
Automatic makes the picture fill the screen as much as
possible. It is recommended to press the cursor up/down or
left/right key to adjust the picture position on the screen.
Super zoom removes the black bars on the sides of 4:3
programs with minimal distortion. When in the Movie expand 14:9,
Movie expand 16:9 or Super zoom picture format, you can make
subtitles visible with the cursor up/down.
Note: Not all screen formats are available when displaying HD sources.
-Press “FORMAT, SOURCE, SOUND, or PICTURE” buttons
repeatedly in order to select the viewing options you prefer to use.
-We recommend that you use the “WIDESCREEN” option from the
“FORMAT” MENU when you play a DVD. Some portion of the OSD
contents may not be displayed completely if you have selected other
formats.
10
Use of the remote control -DVD
Press the “SOURCE” button repeatedly to select source AV1 to activate DVD function.
Make sure the source “AV1: DVD” is selected.
SUBTITLE
Select the the DVD subtitle language
EJECT
Eject the disc from the DVD player.
AUDIO
Select the DVD audio language.
DVD
To activate the RC for DVD function.
Note: Press the DVD button before you press
other DVD fuction buttons.
ZOOM
Enlarge a picture on the TV screen.
PAUSE
To pause playback temporarily.
ANGLE
Select a DVD camera angle.
PLAY
To start playback.
Repeat
Select various repeat modes.
STOP
To stop playback.
Repeat A-B
Repeat playback a specific section on a disc.
RWD/FF
Forward/Quick forward/backward/slow
backward
SKIP
To search or select previous chapter or
track.
SKIP
To search or select next chapter or track.
SYSTEM MENU
Access or exit DVD player’s system menu.
DISC MENU
Enter the disc contents menu.
Switches on or off the playback control
mode (for VCD version 2.0 only)
-Users can recognize which buttons work for TV or DVD function by blinked light of remote control.
-Common used buttons for TV and DVD include POWER, SOURCE, SLEEP, MUTE, FORMAT, VOL, PICTURE, SOUND,
numeric keypad (0-9), selection
and OK buttons.
-Press the “PLAY” button after inserting the disc into the DVD slot in order to activate the DVD function.
11
Buttons on the top of the TV
Should your remote control be lost or broken you can still
change some of the basic settings with the buttons on the top of
your TV. Press the power switch to switch the TV on.
Press:
•the + VOLUME -button to adjust to volume;
•the + CHANNEL -buttons to select the TV channels or
sources.
The MENU button can be used to display the Settings menu
without the remote control.
Use:
•the + VOLUME - buttons and the + CHANNEL buttons to select menu items in the directions as shown;
•the + VOLUME button to confirm your selection.
Note:
When a menu is activated through the MENU button on the top of
the TV, a menu can be closed only by navigating to Exit and pressing
the MENU button.
Buttons on the DVD base
If you don’t have remote control, you still operate DVD player
by using the buttons on the front side of the DVD base.
Press:
• the EJECT button to eject the disc from DVD.
Note: Press the STOP button before you eject the disc from
DVD.
• the PLAY/PAUSE button to start or interrupt disc
playback.
• the STOP button to stop playback.
Note:
Before use DVD, press SOURCE button on remote to change your
source to DVD (AV1).
12
To use the menus
Introduction
When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV.
Please, follow the displayed instructions and read the help text on the specific item highlighted.
The color buttons govern different actions you can take on an activated device. Press the corresponding color button on
the remote control to perform the required action on a selected device.
How to navigate through the Settings menus
Settings
TV
TV
Picture
Setup
Sound
Installation
Features
Exit
Channels
Settings
TV
TV
Picture
Setup
Sound
Installation
Info
Exit
Features
Channels
Settings
TV
Picture
Info
Sound
Picture
Smart Picture
Contrast
Features
Brightness
Channels
Color
Settings
TV
Picture
Sound
Features
Info
Channels
Sharpness
Picture
Color temperature
Smart Picture
Tint
Contrast
Picture format
Brightness
Color
Sharpness
Color temperature
Tint
The Settings menu allows you to access and change
settings and preferences settings.
• Press the MENU button on the remote control to
display the Settings menu.
- Use cursor up/down to highlight and select a menu item
on the left panel.
The right panel shows the content of the menu you have
highlighted in the left panel.
Note: Sometimes not all the menu items are visible on the
screen. Use cursor down to scroll down to additional items.
- Use the cursor right to enter the right panel.
The content of the right panel is moved to the left panel
and the right panel shows the content of the newly
highlighted item in the left panel.
Note: In some cases, you will want to watch the picture on
your screen while adjusting settings. This means that when the
highlight is on the right side panel, the other menu items are
hidden. When the cursor left is pressed again, the hidden
menu items re-appear and the highlight moves to the left
panel.
Picture format
Info
• Press the cursor left to go one menu level up again.
- Press the OK button on the highlighted item to activate
and to dismiss the menu.
- Press the MENU button again to exit the Settings menu.
Note: The menu is also dismissed by pressing one of the color
buttons (if present) referring to certain actions which may be
executed.
13
Installation
Select the menu language
Settings
Installation
TV
Language
Setup
Autoprogram
Installation
Weak channel installation
Exit
Software upgrade
Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
Use the cursor right to enter the Installation menu.
Select Language and enter the list of available languages with the
cursor right.
5 Select your preferred language with the cursor up/down and press
the OK button to confirm you selection.
6 Proceed with the Installation menu.
1
2
3
4
Store TV channels
Info
Settings
Installation
Autoprogram
Language
Start now
Autoprogram
Weak channel installation
Software upgrade
Info
Note: All channels must be unlocked in order to autoprogram. If
requested, enter your PIN code to unlock all channels. See Menu
preferences in the Settings, TV menu, p. 18.
Television Installation
Installation mode
Antenna
Please select your
Cable
installation mode
Previous
Next
Select Autoprogram in the Installation menu.
Use the cursor right to enter the Autoprogram menu.
Press the OK button.
Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and ATSC) channels
available in your local area.
When Cable is selected, the TV will detect cable company
supplied signal sand will search for cable TV (NTSC, ATSC, QAM
modulated) channels available in your area.
Make sure that registration with your cable TV provider and
connection of equipment are completed.
5 Press the green button “Next” on the remote control.
1
2
3
4
6 Press the green button “Start” to start autoprogramming. The
menu screen disappears and the progress of autoprogramming is
displayed. The progress bar indicates the number of analog and
digital TV channels found.
When Autoprogramming is complete, a message appears
confirming the completion and the TV switches to the first
installed TV channel.
Notes:
• When you have locked TV channels before initiating Autoprogram, a message appears asking to enter your PIN code in
order to complete Autoprogramming.
• ATSC channel information is updated automatically when the TV is in standby after 3 minutes and every 3 hours thereafter.
• When channel update is interrupted, the new updated channel information is retained along with the old un-updated
channel information.
• Background Autoprogramming occurs only when the TV is turned on.
• Channel information about an ATSC channel is updated only for the ATSC channel currently tuned.
• If an NTSC channel is tuned, then in Background Autoprogramming the TV shall scan all the possible ATSC frequencies
and update information.
• Weak channel installation allows you to manually tune weak ATSC channels in order to adjust the antenna and thus
optimize signal quality for that channel. (See Installation menu, Weak channel installation, p. 15.)
• Once you have searched for the available Antenna as well as the Cable TV channels, they are stored in the memory.
• If Antenna/cable signal is interrupted more than ten minutes, TV will go into off mode. You are requested to press Power button
or CH / button to turn on the TV.
14
Channel tuning
Available channels:
- Cable (analog NTSC or digital QAM)
- Terrestrial (analog NTSC or digital ATSC)
If a tuned channel is not yet in the
master channel map, the TV will attempt to tune to the
channel and it will be added to the map.
If the channel is not acquired, a message will appear reporting
that the channel is not available. When you tune an audio-only
digital subchannel, a display appears with the message Audio only.
Note: Subchannel selections
Note: Digital Channel selection delay
Due to the tuning complexity of subchannel
digital programming, the time to select and view
a digital channel may take slightly longer than
what the viewer is normally accustomed to (as
compared to analog channel programs).
Digital channel broadcasts contain program and
system data information that must be processed
before the channel selection can be displayed.
The new standards employed with digital broadcasting make it possible
to receive multiple program channels under a single major channel
number which can be selected by pressing the digit remote control
direct-access channel number entry.
Important:
After the installation of the TV channels is completed, always
make a selection in the Installation menu between Antenna or
Cable whether you want to watch Antenna TV channels or Cable
TV channels.
If you make use of a signal splitter do not forget to put the switch
in the corresponding position.
Weak channel installation
Antenna reception for broadcast channels may vary. If you are
having difficulties acquiring weaker signals, we suggest
you use: Weak Signal Installation feature.
Here’s how:
1 In the antenna mode, select a channel from the displayed list of
TV channels. Select the “Start” by red button on the remote
control; TV set will detect the signal.
2 The signal strength is continuously displayed and updated as the
antenna rotates.
When strength is enough to identify, user can store the channel
in the channel list by green button on the remote control.
Settings
Installation
TV
Language
Setup
Autoprogram
Installation
Weak channel installation
Exit
Software upgrade
Info
Software upgrade
This menu allows you to upgrade your TV software using a USB
device.
USB upgrade
It is possible to initiate an upgrade procedure from a USB portable
memory (not supplied). The memory device must be filled with the
appropriate upgrade image (and structure) which can be found on
the www.usasupport.magnavox.com website. How to upload a new
software version on your portable memory device (not supplied),
see Annex 1, p. 44.
15
Setup menu
This menu is used to control the settings of special TV
functions, features and accessory devices.
The Preferences menu allows you to change settings that will
typically be accessed only occasionally.
The Source menu allows you to select a source.
The Clock menu allows you to use your TV as a clock. This setup
is necessary for the correct working of the Lock after feature.
Settings
Setting
Setup
TV
Preferences
Setup
Source
Installation
Clock
Exit
Preferences
Press the MENU button.
Select Setup with the cursor down key and press the cursor right
key to select the Preferences menu.
3 Press the cursor right key again to select Sound preferences.
4 Press the cursor right key once more to enter the Sound
preferences menu.
1
2
Info
Settings
Setup
Preferences
Preferences
Sound preferences
Source
Features preferences
Clock
Menu preferences
Auto surround
Reset AV settings
Sometimes the broadcaster transmits special signals for
Surround sound encoded programs. The TV automatically switches
to the best surround sound mode when Auto
surround is switched On.
Info
Features preferences
Settings
Preferences
Sound preferences
Sound preferences
Auto surround
Caption service
Features preferences
Menu preferences
Reset AV settings
Info
Settings
1
2
3
Preferences
Features preferences
Note:
The captions do not always
use correct
Sound preferences
Caption service
spelling
and
grammar.
Not
all
TV
programs
and
Features preferences
Digital caption service
product
commercials
are
made
for
broadcast
with
Menu preferences
Digital caption options
Closed
Caption
Reset AV
settings informations included.
Refer to your area’s TV program listings for the TV
channels and times of Closed Caption
programming. Captioned programs are usually
noted in the TV listings with service marks such as
Info
‘CC’.
4
This allows you to select the Closed Captions service levels of
analog broadcasting to be displayed.
Closed Captioning allows you to read the voice content of
television programs on the TV screen. Designed to help the
hearing impaired, this feature uses on-screen ‘text boxes’ to show
dialogue and conversations while the TV program is in progress.
Captions will appear on the screen during captioned broadcasts.
Select Captions service.
Press the cursor right key.
Select the desired Caption service:
• CC 1,2,3 or 4
Dialogue (and descriptions) for the action on the captioned TV
program shows on screen.
Usually CC1 is the most used. CC 2 may be used for alternate
languages if they are being transmitted.
• T 1,2,3 or 4
Often used for channel guide, schedules, bulletin board
information for Closed Captions programs, news, weather
informations or stock market reports.
Not all Caption services are necessarily being used by a TV
channel during the transmission of a Closed Caption program.
See Closed Caption in the TV, Features menu, see p. 24, to turn
the Caption service On or Off.
Note: This television provides display of television closed captioning
conforming with the EIA-608 standard and in accordance with
Sections 15.119 of the FCC rules.
16
Info
Digital caption service
Settings
Preferences
Features preferences
Sound preferences
Caption service
Features preferences
Digital caption service
Menu preferences
Digital caption options
Reset AV settings
Info
This allows you to configure the way you choose to view digital
captioning.
Select one of the digital service channels made available by the
caption provider.
There are six standard services. Service 1 is designated as the
Primary Caption Service. This service contains the verbatim, or
near-verbatim captions for the primary language being spoken in
the accompanying program audio.
Service 2 is designated as the Secondary Language Service.
This service contains captions in a secondary language, which
is a translation of the captions in the primary Caption
Service. The other service subchannels are not pre-assigned.
It is up to the discretion of the individual caption provider to
utilize the remaining service channels.
Digital caption options
This allows you to modify how digital captions are displayed on your
TV. Select from the following options to change the visual
characteristics of your TV’s digital captioning.
• Reset to default
Select this option to reset the digital caption options to the
captions provider default settings.
Press the OK button to confirm.
• Size
Select this option to choose a caption display size according
to your own preference. Select Default (Automatic),
Small, Standard or Large and press the OK button to
confirm.
• Style
Select this option to choose a caption display font style
according to your own preference. Select Default, Mono
spaced serif, Serif, Monospaced sans serif, Sans serif,
Casual, Cursive or Small caps.
• Text
Select this option to choose caption display text box, text
color and/or the opacity according to your own preference.
Select a color and an opacity option.
• Background
Select this option to choose caption display character back
ground color or one of the background opacity options
according to your own preference. Select a color and one of
the opacity options.
17
Settings
Preferences
Menu preferences
Sound preferences
OSD
Features preferences
Show emergency alerts
Menu preferences
Change PIN
Reset AV settings
Info
Note: Emergency Alert Signalling is not possible:
- when content browsing;
- with analogue video sources.
Notes:
- You always have the possibility to remove the
message from the screen.
- The message display will overlap whatever
menu element or other message is on the
screen.
Menu preferences
OSD
1 Select OSD.
2 Press the cursor right key to select Normal or Minimum.
Normal activates a continuous display of the channel number
for a maximum of 10 minutes and extended display of TV
channel and program information on screen. For example,
information on the main or auxiliary program, input signal quality
of connected accessory devices, the display format, sound mode,
availability of Closed Caption service, the audio language, the
rating, sleep timer setup is displayed.
Minimum activates the display of reduced channel information.
Note: When Closed Captions is switched on, continuous display of the
channel number and clock is not possible.
Show emergency alerts (EAS)
This allows you to select the alert priority level of the information
disseminated by the cable operator. The standard SCTE18 defines
an Emergency Alert signalling method for use by cable TV
systems to signal emergencies to digital devices such as digital
set-top boxes, digital TVs and digital VCRs.
The Emergency alert signalling scheme defined in the standard
allows a cable operator to disseminate emergency alert
information related to state and local-level emergencies and
warnings in a cost-effective and efficient way, while minimizing
disruption of programming.
An Emergency alert message will have one of the following
priorities: Low, Medium, High or Maximum.
The Emergency alert message with priority High or Maximum
will always be presented. Low or Medium will be present or
ignored depending on the setting you select.
Important: When the TV clock is undefined (See Setup menu, Clock,
p. 20), the Emergency Alerts will be ignored.
Important: you have forgotten your PIN!
1 Select Change PIN in the Menu preferences
menu and press the cursor right key.
Press
the cursor right key to enter the
2
overriding PIN code 0-7-1-1.
3 Press the cursor again and enter a new
personal 4-digit PIN code. The previous
code is erased and your new PIN-code is
stored.
The Emergency Alert message display will contain following
information:
- The Emergency Alert text
- The start time + date
- The end time + date.
1 Select Show Emergency Alerts in the Menu preferences menu.
2 Press the cursor right key and select one of the Emergency alerts
options:
- Always: You always want available Emergency alert messages to
be displayed;
- Skip low priority: You want low level messages to be ignored;
- Skip low/medium priority: You only want the high priority
message to be displayed.
Set/Change PIN
1 Select Set or Change PIN with the cursor down.
2 If no PIN-code exists, the menu item is set to Set PIN.
Follow the instructions on screen. If a PIN-code has previously
been entered, the menu item is set to Change PIN. Follow the
instructions on screen. All number combinations from 0000 to
9999 are valid numbers.
3 The Menu preferences menu reappears with a message
confirming that the PIN has been created.
18
Reset AV settings
Settings
Preferences
Reset AV settings
Sound preferences
Start now
Features preferences
Menu preferences
This function allows you to reset most of the picture and sound
settings to their default factory levels.
1 Select Reset AV settings with the cursor down key.
2 Press the cursor right key.
3 Press the OK button to erase settings and reset them to their
Reset AV settings
default values.
Info
Source
Settings
Setup
Source
Preferences
AV1
Source
AV2
Clock
This menu allows you to identify the accessory devices you have
connected to the external inputs/outputs.
AV3
HDMI
Side
Analog Audio In
1 Select Source in the Setup menu.
2 Press the cursor right to enter the list of types of devices
3 connected to the selected input.
Select the accessory device with the cursor up/down.
When you select DVD(AV1), AV2, AV3, HDM1, Side or Analog
Audio In, a list appears allowing you to identify which type of
accessory device is attached to this input. The TV detects the
presence of the connected device and the signal is routed appropriately.
Info
Analog Audio In
If your accessory device has a DVI output connector, only the
video signal is transmitted in digital format. To input an audio
signal, please connect the analog audio L and R outputs to the TV’s
L and R AV1 audio input plugs. To activate the audio function,
select HDMI from the Analog Audio In menu to activate.
Pr
Pb
Y
L
R
VIDEO
HDMI
HDMI
DVI
AV2:
Audio L/R
Digital Audio Out
In addition to accepting audio input through HDMI, the TV can
output Digital audio through the DIGITAL AUDIO OUT
(SPDIF OUT) connector to an external amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital
Audio In, you can connect it with a single cable to the TV’s
DIGITAL AUDIO OUT (SPDIF OUT). See Connect
Accessory Devices, Digital Surround Receiver, p. 37.
19
Clock
Settings
Setup
Clock
Preferences
Auto clock mode
Source
Auto clock channel
Clock
Time
Day
Time zone
Daylight saving
This allows you to use your TV as a clock.
Note: Adjusting the clock is necessary for the correct operation of Lock after
(See TV settings, Channels, p. 25) features.
Auto clock mode
1
2
3
Info
Most TV channels do not transmit clock
information. A few cable channels do, but they
are at the end of the channel ring. Antenna
channels do not transmit clock information.
If clock information does not appear, you can
assume that either clock extraction is taking a
long time or that there is no clock.
Select Clock in the Setup menu.
Press the cursor right key to select the Auto clock mode.
Press the cursor right key to instruct the TV to get the time
automatically or manually.
Auto clock channel (only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time
can be found by the TV. Typically time can be found on PBS as well
as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto
clock channel menu item can not be selected.
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and
day. If Auto clock mode Manual has been selected, and no clock
search has been done, the system will keep the entered time and
day.
Time zone (only available when Auto clock mode is set to Automatic)
1
2
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display for
your local time.
Select Time zone with the cursor down.
Press the cursor right to select your local time zone.
Daylight saving (only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially
broadcasted signals. This menu item allows you to disable the
automatic setting of daylight saving time. This is useful if you live
in an area or state where daylight saving is not applied, but you
receive channels from other areas where daylight saving signals are
broadcasted.
1
2
3
Select Daylight saving with the cursor down.
Press the cursor right key to select Automatic for automatic
clock correction for daylight saving time, based on specially broadcasted signals.
Select Off to disable automatic clock correction based on the specially broadcasted signals.
20
TV menu
Settings
TV
TV
Picture
Setup
Sound
Installation
Features
Exit
Channels
Press the MENU button on the remote control to display the
Settings menu. The TV menu gives you an overview of the menus you
can select.
Note: Depending on the input signal, one or more menu items may not be
selectable.
Picture menu
Note: Some menu items are not available in case of HD sources.
Info
Settings
TV
Picture
Picture
Smart Picture
Sound
Contrast
Features
Brightness
Channels
Color
Sharpness
Color temperature
1
2
3
4
Press the cursor right key to select Picture.
Press the cursor right key again to enter the Picture menu.
Select the menu items with the cursor up/down key.
Adjust the settings with the cursor left/right key or enter the list of
submenu items with the cursor right key. Select a
submenu item with the cursor up/down key.
Smart picture
1
Select Smart picture to display a list of predefined picture
settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in
the picture menu.
Note: This Magnavox TV has been set at the factory to look best in
bright store environments, which typically use fluorescent lighting. As your
home will likely not be as well lit as a store, we recommend that you
cycle through the various smart picture modes to find the one that best
suits your own viewing conditions. Most consumers will find that
Natural is the correct choice.
2
You can press the Smart picture button repeatedly to select
either Personal, Rich, Natural, Soft, Multimedia or Eco picture
settings.
Note: When you watch programs using VCR, it’s recommended to select
Soft Mode via smart picture.
Tint
Picture format
Info
Contrast
This will adjust the intensity of bright parts in the picture but keep
the dark parts unchanged.
Brightness
This will adjust the light output of the complete picture, which will
mainly affect the darker areas of the picture.
Color
This will adjust the saturation level of the colors to suit your
personal preference.
21
Sharpness
This will adjust the sharpness of fine details in the picture.
Color temperature
This will increase or decrease Warm (red) and Cool (blue) colors
to suit personal preferences.
Select Cool to give the white colors a blue tint, Normal to give
the white colors a neutral tint, Warm to give the white colors a
red tint.
Tint
Allows you to select the picture ‘s color mix or hue.
Picture format
This menu item performs the same as the FORMAT button on the
remote control. See Use of the remote control, p. 10.
22
Sound menu
Settings
TV
TV
Picture
Setup
Sound
Installation
Settings
Exit
TV
Features
TV
Channels
Picture
Setup
Sound
Installation
Features
Exit
Channels
Info
Settings
Info
TV
Sound
Picture
Smart Sound
Sound
Volume
Settings
Features
TV
Channels
Picture
Sound
Features
Channels
Info
Balance
Sound
Headphone volume
Smart Sound
Sound mode
Volume
Alternate audio
Balance
Digital audio language
Headphone volume
Mono/Stereo
Sound mode
Alternate audio
Digital audio language
Settings
Info
TV
Mono/Stereo
Sound
Picture
........
Sound
Mono/Stereo
TV
Channels
Picture
AVL
Sound
Delta volume
........
Sound
Mono/Stereo
Features
AVL
Channels
Delta volume
Settings
Features
Info
1 Select Sound in the TV Settings menu.
2 Press the cursor right key to enter the sound menu.
3 Select the menu items with the cursor up/down key and adjust the
settings with the cursor left/right key.
4 Remember, control settings are at normal mid-range levels when the
bar scale is entered.
Smart sound
Select Smart sound to display a list of predefined sound settings,
each corresponding with specific factory settings of Treble and Bass.
1 Press the cursor right key to enter the list.
2 Press the cursor up/down key to select a predefined sound setting.
Personal refers to the personal preference sound settings in the sound
menu.
Note: The moment you are in a predefined Smart sound setting and you
modify a setting in the Sound menu, all values of the menu will overwrite the
previously made personal setting.
Volume
This will adjust the sound output level.
Balance
This will adjust the output of the right and left speakers to obtain the
best stereo reproduction for your listening position.
Headphone volume
This controls the level of sound through the headphones.
Sound mode
This select the modes for more spatial or surround sound
reproduction dependent on the broadcast signals or signals from
external inputs received.
Alternate audio (only selectable with analog broadcast signals)
This gives you the possibility to swap between the Main and
Second Audio Program (SAP) when it is available.
Digital Audio language (only selectable with digital broadcast signals)
Selects your language preference when digital broadcast
signal multilingual audio track programs are available.
Note: The default language for the digital channels is the installed menu
language.
Info
Mono/Stereo
Selects per TV channel, Mono or Stereo sound when analog stereo
broadcasts are available.
AVL (Automatic Volume Leveler) (only available with analog
broadcast and non-Digital signals)
Automatically reduces the volume differences between channels and
programs, providing a more constant overall level. This will also reduce
the dynamics of sound.
Delta volume
Corrects for any permanent volume differences between TV channels
or external sources.
Manufactured under license from Dolby
Laboratories. “Dolby” “Pro Logic” and
the double-D symbol are trademarks of
Dolby Laboratories.
23
Features menu
Settings
TV
Features
Picture
Closed captions
Sound
Sleeptimer
Features
Channels
1 Select Features in the TV Settings menu.
2 Press the cursor right key to enter the features menu.
3 Select the menu items with the cursor up/down key and
adjust the settings with the cursor left/right key.
Closed captions
Info
This displays the transmitted CC- or CS-text on the screen
according to your chosen CC or CS service in the Setup menu,
Features preferences menu, p. 16. This text can either be
permanently displayed (assuming that the service is
available in the broadcast) or only when mute is active.
1 Press the cursor right key after having selected Closed captions.
2 Select On, Off or On during mute.
Sleeptimer
This sets a time period after which the TV automatically turns to
standby.
1 Select Sleeptimer.
2 Press the cursor right key.
3 Select a value with the cursor up/down key. The list will have values
from Off to 180 minutes. When Off is selected, the sleeptimer is
turned off.
You can always turn off your TV earlier or select another time set.
24
Channels menu
Settings
TV
Channels
Picture
Lock after
Sound
Channel lock
Features
TV ratings lock
Channels
Movie ratings lock
Prefered channels
Region ratings lock
Clear region ratings
1
2
3
Lock after
Note: Lock after is only selectable if time and date are known. See Setup,
Clock menu p. 20.
Info
Settings/TV
Channels
Lock after
Lock after
Timer
Channel lock
Time
1
TV ratings lock
Movie ratings lock
2
Prefered channels
Region ratings lock
3
4
Clear region ratings
Info
This menu can control special functions for the TV channels.
Select Channels in the TV settings menu with the cursor up/down key.
Press the cursor right to enter the channels menu.
Press the cursor up/down key to select a channels menu item.
This allows you to prevent the viewing of the channels after a selectable
time delay. Locked channels can still be tuned, but the picture is blanked
and the audio is muted.
Press the cursor right and select Timer On or Off.
When set to On this allows you to set the clock.
When having selected Timer On, you will be asked to enter your PIN
(See Set/Change PIN, p. 18). Follow the instructions on screen.
Select Time and press the cursor right. This allows you to set the time
after which the lock is set.
Select AM or PM to select the correct period of the day.
Enter the time with the digit or the cursor buttons and press OK to
confirm.
Channel lock
This allows you to completely lock a certain TV channel or external
source. Select the channels or subchannels you want to lock and press
OK to confirm.
Settings/TV
Channels
TV ratings lock
Lock after
Please enter your PIN
Channel lock
TV ratings lock
Movie ratings lock
Prefered channels
Region ratings lock
Clear region ratings
Info
TV ratings lock
Your TV is equipped with a V-chip. This allows you to control
access to individual programs based on their movie and TV ratings. All
settings apply to all AV inputs, except HDMI. The program content
advisory data are sent by the broadcaster or program provider.
1 Select TV ratings lock with the cursor down. A list appears, showing
the age-based TV ratings and a corresponding content-based ratings
list.
2 Press the cursor right to enter the list.
3 Select an age-based TV rating with the cursor up/down, and enter, if
present, the list with content-based ratings with the cursor right, and
select one content-based rating.
4 Press OK to activate/de-activate the selected rating. You are asked to
enter your PIN-code (see Set/Change PIN, p. 18). If the code is correct,
the TV ratings lock menu reappears.
5 Select another content-based rating if you like and press OK again.
You need only enter your PIN-code once while the menu is active. You
can lock/unlock any number of ratings on the list without re-entering your
code.
Each ratings item has a box-graphic in front of it to indicate whether or not
programs carrying that rating are currently locked:
: all items in the contents-based list are locked as well;
•
: the item is unselected;
•
: some content-based ratings are selected/unselected.
•
25
Age-based Rating Content-based Rating
All
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
none
none
none
(FV) Fantasy Violence
none
(D) Dialog
(L) Language
(S) Sex
(V) Violence
(D) Dialog
(L) Language
(S) Sex
(V) Violence
(D) Dialog
(L) Language
(S) Sex
TV-Y
TV-Y7
TV-Y7-FV
TV-G
TV-PG
TV-14
TV-MA
When All has been selected, all items in the age-based and in
the contents-based lists are locked. If, while All is selected,
any other item, either an age-based or content-based item, is
unselected, then All is automatically unselected.
None is the selection for items that either have no rating
information or have a rating of None. Both will be locked.
When an item on the age-based list is selected, all items below
that item of the same group are locked as well. When you
select a content-based rating, all identical content- based
ratings in the younger age-based categories are also selected.
appropriate for children of all ages with themes and
elements suitable for children aged 2-6
programs designed for children age 7 and older
programs include fantasy violence more intense than other
programs in the TV-Y7 category
programs suitable for all ages. These programs contain little
or no violence, no strong language and little or no sexual
dialogue or situations
programs contain elements that some parents may find
unsuitable for younger children and which may need
parental guidance. The program may contain moderate
violence, sexual dialogue and/or situations and some strong
language.
programs contain elements that may not be
suitable for children under 14 years of age. These programs
include one or more of the following: intense violence,
intense sexual situations, suggestive dialogue and strong
language.
programs are designed to be viewed by adults and may be
unsuitable for children under the age of 17. These programs
may contain graphic violence, explicit sexual activity and/or
crude or indecent language.
26
Movie Ratings Lock
Settings/TV
Channels
Movie ratings lock
Lock after
Please enter your PIN
Channel lock
1
TV ratings lock
Movie ratings lock
2
Prefered channels
Region ratings lock
Clear region ratings
3
4
Info
Settings/TV
Channels
Prefered channels
Lock after
Channel 1
Channel lock
Channel 2
TV ratings lock
........
Movie ratings lock
Prefered channels
Region ratings lock
Clear region ratings
This function allows you to control access to individual movies based on
their MPAA ratings (Motion Picture Association of America).
Select Movie ratings lock with the cursor down. A list appears, showing
all valid MPAA content ratings.
Press the cursor right to enter the list. You are asked to enter your
code. (See Set/Change PIN, p. 18.) If the code is correct, the Movie
ratings lock menu reappears.
Select a movie rating with the cursor up/down.
Press OK to activate/de-activate the selected rating.
Each rating item has a box-graphic in front of it to indicate
whether or not programs carrying that rating are currently locked:
: movies with this rating are locked;
•
: movies with this rating are unlocked.
•
When All has been selected, all items on the movie ratings list become
selected. (All movies are locked.) If, while All is selected, any other item is
unselected, then All is automatically unselected.
When NR has been selected, no other item is selected.
When any other item has been selected, all ratings below are selected as
well, thus all movies with those ratings will be locked.
Info
NR
G
PG
PG-13R
Settings/TV
Channels
Movie ratings lock
Lock after
Please enter your PIN
R
Channel lock
TV ratings lock
NC-17
Movie ratings lock
Prefered channels
X
Region ratings lock
Clear region ratings
not rated
movies with a mild content, suitable for all ages
movies for which parental guidance is recommended. They
may contain a few racy or violent scenes or maybe some bad
language
movies for which parental guidance may be recommended if
under age 13
restricted. The movies usually contain offensive sex or bad
language and may be unsuitable for children under the age of
17. Parental guidance or permission needed.
even with parental permission, forbidden under age 17.
More offensive sex, violence or bad language.
movies which generally focus on sex, violence and/or bad
language. Also known as pornography.
Info
Preferred channels
Settings/TV
Channels
Prefered channels
Lock after
Channel 1
Channel lock
Channel 2
TV ratings lock
........
Movie ratings lock
Prefered channels
Region ratings lock
Clear region ratings
Info
1
2
3
4
5
A channel, when installed, is marked as preferred by default and
added to the channel list. This feature provides the ability to
remove a channel number from the channel list.
Select Preferred channels with the cursor down key.
Press the cursor right key to enter a list with all stored
channel numbers.
Select the channel you want to remove with the cursor down key.
Press OK.
Repeat to remove other channels.
27
Region ratings lock
Settings/TV
Channels
Region ratings lock
Lock after
Please enter your PIN
This allows you to control access to individual programs base on their
broadcasted regional rating.
Channel lock
TV ratings lock
Movie ratings lock
1 Select Region ratings lock with the cursor down. A list appears,
Prefered channels
Region ratings lock
Clear region ratings
2
3
Info
Settings/TV
Channels
Clear region ratings
Lock after
Please enter your PIN
4
Channel lock
5
TV ratings lock
Settings/TV
Movie ratings lock
Channelschannels
Prefered
Lock after
Region ratings lock
Channel lock
Clear region ratings
TV ratings lock
Region ratings lock
Please enter your PIN
Movie ratings lock
Info
Prefered channels
Region ratings lock
Clear region ratings
showing the age-based Region ratings and a corresponding contentbased ratings list.
Press the cursor right to enter the list.
Select an age-based Region rating with the cursor up/down, and enter,
if present, the list with content-based ratings with the cursor right, and
select one content-based rating.
Press OK to activate/de-activate the selected rating. You are asked to
enter your PIN-code (see Set/Change PIN, p. 18). If the code is correct,
the Region ratings lock menu reappears.
Select another content-based rating if you like and press OK again.
You need only enter your PIN-code once while the menu is active. You
can lock/unlock any number of ratings on the list without re-entering your
code.
Each ratings item has a box-graphic in front of it to indicate whether or not
programs carrying that rating are currently locked:
: all items in the contents-based list are locked as well;
•
: the item is unselected;
•
: some content-based ratings are selected/unselected.
•
Info
Clear region ratings
Settings/TV
Channels
Clear region ratings
Lock after
Please enter your PIN
This allows you to clear all the locks that you have set in the Region
ratings lock table.
Channel lock
TV ratings lock
Movie ratings lock
Prefered channels
1 Select Clear region ratings with the cursor down.
2 Enter your PIN-code to clear all region ratings’ status.
Region ratings lock
Clear region ratings
Info
28
Integrated DVD - Getting started
Setting the OSD Language
You can select your own preferred language setting to DVD OSD.
(on screen display)
--SETUP-OSD LANG
ENGLISH
FRANÇAIS
ESPAÑOL
RETURN
SETUP
Press SYSTEM MENU.
to select “SETUP” page
Press
keys on the remote control to navigate in the
Use the
menu.
4 Move to “OSD LANG” and press .
5 Select a language and press OK to confirm.
6 Press SYSTEM MENU to exit.
1
2
3
Note:
Press the “SOURCE” button repeatedly to select source AV1 to activate DVD
function. Make sure the source “AV1: DVD” is selected.
Disc operations
IMPORTANT !
-Depending on the DVD or VIDEO CD, some operations may be different or restricted.
-Do not put any objects other than disc in the disc player. Doning so may cause the disc player malfunction.
-If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available
on the current disc or at the current time.
-This DTS is not supported. Please press the AUDIO button to select alternatives.
Playable discs
If you are having trouble playing a certain disc,
remove the disc and try a different one.
Improper formatted disc will not play on this
DVD Player.
Your DVD player will play:
– Digital Versatile Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Digital Versatile Discs + Recordable (DVD+R/-R)
– Digital Versatile Discs + Rewritable (DVD+RW/-RW)
– Compact Discs (CDs)
– MP3 disc on CD-R (W)
– Picture (JPEG) files on CD-R (W):
Region codes
DVDs must be labeled for Region 1 or All in order to play on this
DVD system.
29
Selecting track/chapter
(DVD/SVCD/VCD/CD)
Playing discs
1 Turn on the TV and set to the correct Video In
briefly during playback to go to the next chapter/track.
2 Press
to go to the previous track (VCD/CD) or return
to the beginning of the current chapter (DVD/SVCD).
1 Press
channel DVD (AV1). (p.19)
Note: Make sure the TV power is “ON”.
2 Insert a disc into integrated DVD player.
Note: Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing down.
3 Playback will start automatically. (Exclude MP3, JPEG)
Note: If the disc is locked by parental control, you must enter
your four-digit password or default password to unlock this
function.
4 At any time, simply press STOP to stop playback.
Resuming playback from the last stopped point
(DVD)
Press PLAY to resume playback.
Subtitles
Press SUBTITLE repeatedly to select different subtitle
languages.
If DVD playback can not eject the disc, please turn off
the TV power, and turn on it after few seconds. Then the
disc can be ejected smoothly.
Repeat
Press REPEAT continuously to choose a Repeat mode
during playback.
For DVD
– CHAPTER REPEAT ON:
to repeat playback of the current chapter.
– TITLE REPEAT ON:
to repeat playback of the current track / title.
– REPEAT OFF: to cancel the repeat mode.
Using the disc menu
Depending on the disc, a menu may appear on the TV
screen when you press DISC MENU.
To select a playback feature or item.
Use the
on the remote control, then press
PLAY or OK to activate playback.
For VCD/CD
– REPEAT ONE:
to repeat playback of the current track / title.
– REPEAT ALL:
to repeat playback of all the disc and all the
programmed tracks.
– REPEAT OFF:
to cancel the repeat mode.
To access the menu.
Press DISC MENU on the remote control.
Basic playback controls
Following operations described are based on the use of
remote control.
Repeat A-B (DVD/SVCD/VCD/CD)
Pausing playback
(DVD/SVCD/VCD/CD/MP3)
1 Press REPEAT A-B at your chosen starting point.
2 Press REPEAT A-B again at your chosen end point.
1 During playback, press PAUSE .
The section A and B can be set only within the same
chapter/track.
The section will now repeat continuously.
3 To exit the sequence, press REPEAT A-B.
Playback will pause and sound will be muted.
2 To return to normal playback, press PLAY.
Zoom (DVD/SVCD/VCD)
Zooming allows you to enlarge or reduce the video image
during playback.
1 Press ZOOM repeatedly to increase and decrease the
playback video image.
30
Playing MP3/JPEG picture CD
Forward/Reverse searching (DVD/SVCD/VCD)
1 Press
during playback to select the required speed:
2X, 4X, or 8X (backward or forward).
Sound will be muted (DVD/VCD) or intermittent (CD).
2 To return to normal speed, press PLAY.
IMPORTANT !
You have to turn on your TV and set to the correct
Video In channel DVD (AV1). (p.19)
General operation
Special disc features
1 Insert an MP3/JPEG Picture CD disc.
Playing a title (DVD) (When DVD disc is support)
1 Press DISC MENU.
2
2 Use
3
The disc title menu appears on the TV screen.
keys or numeric keypad (0-9) to select a
play option.
3 Press OK key to confirm.
4
Camera angle (DVD)
6
Press ANGLE repeatedly to select different desired angle.
Changing the Audio language (DVD)
For DVD
Press AUDIO repeatedly to select different audio
languages.
The data disc menu appears on the TV screen.
or use the numeric keypad (0-9) to select the
Use
folder and press OK to open the folder.
Press
or use the numeric keypad (0-9) to highlight
an option.
Press OK to confirm.
The playback will start from the selected file to the end
of the folder.
Press SYSTEM MENU to exit
SMART NAVI
Changing the Audio channel
For VCD
Press AUDIO to select the available audio channels
provided by the disc (STEREO, MONO LEFT, or
MONO RIGHT).
ROOT
0
01
1
02
2
03
3
04
4
05
5
06
6
07
7
Repeat (MP3/JPEG picture CD)
– Press REPEAT continuously to access different ‘Play
Mode’.
• REPEAT ONE: keep a JPEG image still on the screen
or play an MP3 file repeatedly.
• FOLDER REPEAT: play all files in the selected folder
repeatedly.
• DISC REPEAT: play all files in the disc.
• REPEAT OFF: to cancel the repeat mode.
31
System menu options
--DVD MENU-SETUP
FEATURES
FACTORY RESET
EXIT DVD MENU
Setup
The option included in “SETUP” is “OSD LANG”.
1 Press SYSTEM MENU to select SETUP.
2 Press OK to enter SETUP menu.
3 Press SYSTEM MENU to exit.
(For “OSD LANG”, please refer to p.29.)
GO TO SETUP
Features
--DVD MENU-SETUP
FEATURES
FACTORY RESET
The options included in FEATURES are PARENTAL and
PASSWORD.
1 Press SYSTEM MENU.
2 Press
to select “FEATURES” page.
3 Press SYSTEM MENU to exit.
EXIT DVD MENU
GO TO FEATURES
32
Parental
Some DVDs may have a parental level assigned to the complete disc
or to certain scenes on the disc. This feature lets you set a playback
limitation level.
The rating levels are from 1 to 8 and are country dependent. You
can prohibit the playing of certain discs that are not suitable for
your children or have certain discs played with alternative scenes.
--FEATURES-KID SAFE
G
PG
PG-13R
PG-R
NC-17
X
NO PARENTAL
PARENTAL
PASSWORD
RETURN
VCD, SVCD, CD have no level indication, so parental
control function has no effect on those kinds of discs. This situation
applies to most illegal DVD discs.
1
2
3
4
5
SET FEATURES
DVDs that are rated above the level you selected will not
play unless you enter your four-digit password and choose a
higher level rating.
--FEATURES-PARENTAL
PASSWORD
to highlight ‘PARENTAL’.
Press
Enter its submenu by pressing
.
Use
to highlight a rating level for the disc inserted.
Press OK to confirm.
Press SYSTEM MENU to exit.
CHANGE
Note:
- Some DVDs are not encoded with a rating, and “PARENTAL” does not work
for such Discs.
RETURN
CHANGE PASSWORD
KID SAFE
G
PG
PG-13R
PG-R
NC-17
X
NO PARENTAL
33
kids material; recommended especially for children and
viewers of all ages.
movies with a mild content, suitable for all ages
movies for which parental guidance is recommended. They
may contain a few racy or violent scenes or maybe some bad
language
movies for which parental guidance may be recommended if
under age 13
restricted. The movies usually contain offensive sex or bad
language and may be unsuitable for children under the age of 17.
Parental guidance or permission needed.
even with parental permission, forbidden under age 17. More
offensive sex, violence or bad language.
movies which generally focus on sex, violence and/or bad
language. Also known as pornography.
all discs can be played.
Password
This feature is used for Parental Control. Enter your four digit password when a hint is displayed on the screen. The default password
is 0711.
--PASSWORD CHANGE-OLD PASSWORD:
NEW PASSWORD:
CONFIRM:
1
2
3
4
5
PLEASE ENTER OLD PASSWORD
to highlight ‘PASSWORD’.
Press
Enter its submenu by pressing
.
Enter the default password 4-digit code.
Enter the new 4-digit code.
Enter the new 4-digit code a second time to confirm.
The new 4 digit code will be take effect.
Factory reset
If FACTORY RESET is selected, all the items in the setup menu
will be reset to default setting, except parental and password
setting.
--DVD MENU-SETUP
FEATURES
FACTORY RESET
EXIT DVD MENU
GO TO FACTORY RESET
1
2
3
4
5
6
7
Press SYSTEM MENU.
to highlight ‘FACTORY RESET’.
Press
Enter FACTORY RESET by pressing OK.
Enter its submenu by pressing .
to highlight the selected item.
Move the cursor by pressing
Press OK to confirm.
Press SYSTEM MENU to exit.
34
Connect Accessory Devices
There is a wide range of audio and video devices that can be connected to your TV. The following
connection diagrams show you how to connect them to the TV.
DVD (AV1) YPbPr, VIDEO and L/R Audio, (For integrated DVD only)
AV2 YPbPr, VIDEO and L/R Audio,
AV3 VIDEO, S-VIDEO, L/R Audio and Digital Audio out (SPDIF OUT)
Side VIDEO, S-VIDEO, L/R Audio and Headphone.
HDMI
75
Don’t insert any cable here. This area is for repair center use only.
Pr
Pb
Y
L
R
VIDEO
Pb
Y
R
VIDEO
L
S-VIDEO
R
L
HDMI
VIDEO
AC IN
O
VIDEEO
VIDEO
L
R
VI EO
SS-VIDEO
L
R
S-VIDEO
Pr
Pb
Y
L
R
VIDEO
Pr
Pb
Y
R
VIDEO
L
S-VIDEO
R
L
HDMI
AC IN
Recorder (VCR-DVD+RW)
ANTENNA
L
Pr
Pb
Y
Pr
Pb
CABLE
Note: Do not place your recorder too close to the TV screen. Some
recorders may be susceptible for signals from the display. Keep recorders
a minimum distance of 20” from the screen.
Y
S-VIDEO
HDMI
L
R
R
VIDEO
L
R
VIDEO
Connect the RF Antenna or Cable TV cable (eventually through
an optional two-way signal splitter and/or Cable TV converter
box)
to the RF IN socket of your
recorder.
from the output OUT of your
2 Connect another RF cable
jack.
recorder to the TV’s CABLE/ANTENNA 75
3 For better playback quality for stereo device only, also connect
the Video, Audio Left and Right (only for stereo devices) AV
to the VIDEO, AUDIO L and R input jacks of AV3.
cables
1
3
AV3:
L + R + VIDEO
OUT
IN
OUT
2
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable to the
S-VIDEO input instead of connecting the recorder to the
VIDEO jack of AV3. S-Video does not provide audio, so audio
cables must still be connected to provide sound.
35
Recorder and other A/V devices
of the RF IN socket of your
other AV device.
2 Connect the RF output of the AV device to the RF input of the
recorder .
from the output OUT of your
3 Connect another RF cable
recorder to the TV’s input CABLE/ANTENNA 75
jack.
To
obtain
better
quality,
also
connect
the
Video
or
S-Video,
4
Audio left and Audio right cables of both devices to AV2
(VIDEO or AUDIO L and R,)
and to AV3 (VIDEO or
AUDIO L and R) .
Notes:
- When you use mono equipment, only the left loudspeaker
reproduces sound. Use a mono-to-stereo adapter (not supplied) for
sound reproduction through all internal loudspeakers.
- When using the S-VIDEO connector do not connect any device to
the AV3 VIDEO input.
1 Connect the RF antenna cable
ANTENNA
Pb
Pr
Y
L
Pr
Pb
Y
L
R
VIDEO
HDMI
S-VIDEO
L
R
VIDEO
R
CABLE
AV3:
L + R + VIDEO
5
AV2:
L + R + VIDEO
3
HDMI 1
IN
OUT
IN
OUT
HDMI 2
CABLE OR ANTENNA
4
2
75
RECORDER
Recorder and cable box with RF output
ANTENNA
Pb
Pr
CABLE
Y
Pr
Pb
Y
L
S-VIDEO
L
R
VIDEO
R
L
R
VIDEO
HDMI
1 Use an signal splitter (not supplied).
2 Connect one of the cable TV signal splitter (not supplied)
outputs
to the cable box’s IN jack.
3 Connect the other cable TV signal splitter output
to the
plug on the bottom of the TV.
CABLE/ANTENNA 75
to the recorders RF IN
4 Connect the cable box’s OUT jack
socket.
5 Connect the Video, Audio Left and Right (only for stereo
sound) recorder AV cables to the VIDEO, audio L and R
input AV2 jacks on the TV.
SPLITTER
AV2:
L + R + VIDEO
4
CABLE OR ANTENNA
2
1
75
3
OUT
IN
IN
STB
OUT
RECORDER
Satellite Receiver / cable box with AV outputs
1 Connect the satellite antenna cable or the Cable TV cable
L
ANTENNA
S-VIDEO
Pr
Pb
Y
Pr
Pb
Y
R
L
R
VIDEO
L
R
CABLE
2
AV3:
L + R + VIDEO
CABLE OR ANTENNA
IN
VIDEO
HDMI
the satellite receiver’s or cable box’s IN jack.
2 Connect the Video, Audio left and right AV cables
VIDEO, L and R audio input jacks of AV3.
to
to the
If your satellite receiver or cable box has an S-Video jack:
For improved picture quality, connect an S-Video cable to the
S-VIDEO input instead of connecting the satellite receiver or
cable box to the VIDEO jack.
Connect the audio cables to the device’s AUDIO L and R jacks
and to the L and R audio AV3 jacks on the TV.
75
STB
36
Recorder and Satellite Receiver / cable box with AV outputs
L
Pr
Pb
Y
Pr
Pb
Y
S-VIDEO
L
R
R
VIDEO
L
VIDEO
R
HDMI
1
Connect the RF Antenna or Cable TV cable as described above.
Connect the AV cables to the satellite receiver’s or cable box’s
AV OUT jacks and to the recorder’s AV IN jacks.
to the TV’s AV3
3 Connect the recorder’s AV OUT jacks
jacks as described above.
4 Connect another RF cable
from the output out of your
jack.
recorder to the TV’s input CABLE/ANTENNA
2
2
AV3:
L + R + VIDEO
OUT
IN
OUT
OUT
IN
OUT
1
CABLE OR ANTENNA
3
STB
75
RECORDER
Digital Surround receiver
L
S-VIDEO
R
Connect a Digital Multi Channel Surround receiver to the
DIGITAL AUDIO OUT (SPDIF OUT) connector at the bottom of
the TV.
DIGITAL
AUDIO
OUT
37
DVD Player or other accessory digital source devices
Devices with Component Video Output Connectors
(YPbPr)
YPbPr
Pr
Pb
Y
Pr
Pb
Y
L
R
VIDEO
L
R
VIDEO
This TV is capable of displaying 1080i, 720p and 480p DTV signals when
connected to a DTV tuner Set-Top Box. Select the output of the Set Top
Box to either 1080i, 720p or 480p. A DTV signal must be available in your
area.
L
S-VIDEO
R
1
2
AV1/AV2:
YPbPr
AV1/AV2:
L+R
1
Connect the three separate component video cables to a
Set-Top box, DVD-players, laser-disc players, video game players,
satellite receivers or other device with component video outputs
(YPbPr), and to the Y, Pb and Pr jacks of AV1 or AV2 on the TV.
Notes: AV1 is for integrated DVD only.
DVD / STB
Devices with an S-Video connector
S-VIDEO
L
Pr
Pb
Y
Pr
Pb
Y
L
R
VIDEO
L
R
VIDEO
S-VIDEO
R
1
2
AV3/Side:
L+R
VIDEO
L
R
S-VIDEO
DVD / STB
Connect an S-Video cable to the AV3 or Side AV input . Note:
When using the S-VIDEO connector do not connect any
device to the AV VIDEO input that you are using.
2 Connect the audio cables to the device’s AUDIO L and R jacks and to
the L and R audio AV3 or Side AV jacks on the TV
accordingly to where you connected the S-Video cable.
1
Notes:
- If necessary, you can center your screen picture position with
the cursor keys.
- Labels for the component video sockets may differ depending on
the DVD player or the device your are connecting. Although the
abbreviations may vary, the letters B and R stand for the blue
and red component signals, respectively, and Y indicates the
luminance signal. Refer to the DVD player’s or devices
instructions for definitions and connection details.
- This television is designed to accept high definition signal standards
720p and 1080i as specified by the Electronic Industries As
sociation standard EIA770.3. Digital devices from different manu
facturers may have differing output standards which may cause
difficulties for proper television display.
- Due to possible digital image distortion when displaying signals
from connected digital equipment, we suggest you select the
Soft setting from the Smart picture menu. See Picture menu,
Smart picture, p. 21.
Set the Personal setting to off before storing this setting.
Warning: If scrolling images, mismatched colors, no color, no
picture, or combinations of these appear on your screen, check
to make sure input cables are connected to their corresponding
color-coded inputs or connections or move your digital device
farther away from your TV.
38
HDMI (High Definition Multimedia Interface)
connectors
HDMI
HDMI is the leading new standard for Digital video and audio
interconnection. With the HDMI connector you can connect
HDMI Set-Top Box compatible DVD-R or DVD player with HDMI,
or DVI-equipped devices like a computer or other HDMI devices
to your TV. With this connection, you can display high-definition
pictures on this TV in digital format.
Note: If the accessory device has DVI output only, use a DVI to
HDMI adapter cable to connect to the HDMI connector
1 Connect your HDMI device with HDMI connector.
2 Select the connected digital device in the Setup, Source menu, p. 19
The HDMI IN connectors allow
- the following TV and monitor display modes:
SDTV 640/720 x 480i
EDTV 640/720 x 480p
HDTV 1920 x1080i/1280 x 720p
Notes:
- If necessary, you can adjust the picture position to the center of the
screen with the cursor keys.
- Due to legal requirements, it is possible that audio may be muted when
playing certain copy protected PCM audio from a device connected to
the HDMI input.
- Your TV supports HDCP (High-bandwidth Digital Content Protection).
This is a system for protecting DVD content outputted via DVI from
being copied. It provides a secure digital link between a video source
(DVD,PC,etc.) and your TV. Content is encrypted at the source device to
prevent unauthorized copies from being made.
- Proper working is only guaranteed with HDMI compliant consumer
products.
- Digital devices from different manufacturers may differing output stan
dards, which may prevent your television from properly displaying
output.
- If your TV does not detect a signal from your HDMI device, turn off
and then turn on the HDMI device. For optimal viewing, we suggest you
adjust your DVD player to one of the following TV display standards:
1920x1080i,1280x720p,720x480i or 720x480p.
HDMI
Pr
Pb
Y
L
R
VIDEO
HDMI
HDMI
DVI
AV2:
Analog Audio out
Side connections
Camera, Camcorder, Game
1 Connect your camera, camcorder or game as shown.
2 Connect to VIDEO
and AUDIO L
for mono equipment.
2
3
1
For stereo equipment also connect AUDIO R . S-VHS quality
with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VIDEO input
and AUDIO inputs .
Do not connect cable and
at the same time. This may
cause picture distortion !
Headphone
1 Insert the plug into the headphone socket as shown.
2 Press the MUTE button on the remote control to switch off
the internal loudspeakers of the TV. The headphone impedance
must be between 8 and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone volume to adjust the headphone volume.
39
Record with your recorder
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1 Select the channel number on your recorder.
2 Set your recorder to record.
See the handbook for your recorder.
Recorder
Pr
Pb
Y
L
R
VIDEO
Note: Switching channel numbers on your TV does not disturb
recording !
TV
To select connected devices
1 Press he SOURCE button repeatedly or select Source in the
Settings menu (see p. 19) to select DVD (AV1), AV2, AV3,
HDMI, Side or TV, according to where you connected your
devices.
2 Press the cursor up/down.
3 Press OK.
Regulatory Notices-Federal Communications Commission Notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the
separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an
experienced radio or television technician for help.
ModificationsThe FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly
approved by Magnavox Consumer Electronics may void the user’s
authority to operate the equipment.
Cables Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.
Canadian notice This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Avis Canadien Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
40
Trouble Shooting Tips- TV
Symptoms
Items to Check and Actions to follow
“Ghost” or double
images
• This may be caused by obstruction to the antenna due to high rise buildings or hills.
Using a highly directional antenna may improve the picture.
No power
• Check that the TV’s AC power cord is plugged into the mains socket.
• Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket
and turn on the television again.
No picture
• Check antenna connections at the bottom of the TV to see if they are properly connected to the TV.
• Possible broadcast station trouble. Try another channel.
• Adjust the contrast and brightness settings. Try another auto picture setting.
• Check the Closed Captions control. Some TEXT modes could block the screen.
• Check if you selected the correct AV source.
No picture and power
switched on
• Your TV has a protective mode in case there is too much heat build-up. Check the
clearance around the vents of the device to be certain there are no blocking walls or
cabinets which would limit the air flow.
Picture position
adjustment
When displaying a High Definition signal from the YPbPr inputs or HDMI input, if necessary, you can
adjust the picture position to the center of the screen with the cursor left/right or up/down buttons on
the remote control. This may be needed due to slight differences in output signals from different brands
and types of HD sources boxes.
Notes: Most High Definition receiver boxes also have picture-positioning controls in their menu
systems. If the TV cursor controls run out of range before the picture is correctly positioned, the
receiver box controls will need to be adjusted.
No photo, music or
video play or in poor
quality only
• Check if the source complies with a supported code.
No sound
• Increase the VOLUME.
• Check that the TV is not muted, press the MUTE button on the remote control.
• When no signal is detected, the TV automatically switches off the sound. This is proper
operation and does not indicate a malfunction.
Good sound but poor
color or no picture
• Adjust the contrast, color, tint and brightness setting. Try another auto picture setting.
Snowish picture and
noise
Television not
responding to
remote control
• Check the antenna connection.
• Check whether the batteries are working. Replace if necessary.
• Clean the remote control sensor lens on the monitor.
• Operating range between TV and the remote control should not be more than approximately twenty feet.
• You can still use the buttons on the right side of your TV.
• Check if the remote control is in the correct mode.
Control of accessory
devices
• The infrared signals of the screen may influence the reception sensibility of other peripherals Solution:
replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from
within a radius of approximately four feet.
The software will not
install
Possibly the operating system is wrong.
Go to www.usasupport.magnavox.com to see which operating systems are supported.
Standby
Your TV consumes energy less than 1w in the standby mode.
After improper
shutdown
If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the
TV again will take a longer time than usual.
Miscellaneous
See Extras, Specifications on this user’s manual.
41
Trouble Shooting Tips- DVD
Symptoms
Items to Check and Actions to follow
No picture
• Refer to your TV’s manual for correct Video In channel selection.
Change the TV channel until you see the DVD screen.
• Check if the TV is switched on.
Distorted picture
• Sometimes a small amount of picture distortion may appear depending on the disc being played back.
This is not a malfunction.
Completely distorted
picture or black/white
picture with DVD
• Make sure the disc is compatible with the DVD player.
• Ensure that the DVD player’s TV Type is set to match that of the Disc and your TV.
No sound or distorted • Adjust the volume of TV.
• Ensure to select stereo output on your disc (except multichannel).
sound
Disc can’t be played
• The DVD+R/CD-R must be finalized.
• Ensure the disc label is facing up.
• Check if the disc is defective by trying another disc.
• Region code incorrect.
Picture freezes
momentarily during
playback
• Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre to edge.
The player does not
respond to the
remote control
• Aim the remote control directly at the sensor on the front of the player.
• Reduce the distance to the player.
• Replace the batteries in the remote control.
• Re-insert the batteries with their polarities (+/– signs) as indicated.
Player does not
respond to some
operating commands
during playback.
• Operations may not be permitted by the disc. Refer to the instructions of the disc jacket.
DVD Player cannot
read CDs/DVDs
• Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD player for
repair.
Menu items cannot be • Press STOP twice before pressing SYSTEM MENU.
selected
• Depending on the disc availability, some menu items cannot be selected.
42
Care And Cleaning
WARNING concerning stationary images on the TV
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD
panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do
not leave moving images on screen for extended periods of time. Do not display the same images too frequently; if you
do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be Laser discs, video games,
Compact Discs Interactive (CD-i), paused Digital Video Discs (DVDs) or video tapes.
Here are some common examples of stationary images:
• DVD menus list DVD content.
• Letter box black bars that appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect ratio. This occurs with some DVDs.
• Video game images and scoreboards
• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are
less likely to damage the picture tube.
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.
These are usually apper in the same location on the TV screen.
TV Location
• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV
where temperatures can become excessively hot -- for example, in direct sunlight or near a heating appliance.
• Allow a free flow of air around the TV.
Cleaning
• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster.
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using
anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.
Use even, easy, vertical strokes when cleaning.
• Occasionally vacuum the vents on the rear of the TV.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may permanently blemish
the cabinet.
43
Annex 1 - Magnavox TV software updrade with portable memory (not supplied)
Introduction
Magnavox offers software upgrade capability for your TV using
USB portable memory (not supplied).
After you have completed a software upgrade, your TV will
typically perform better.
What improvements are made depends on the upgrade
software you are using as well as the software your TV
contained before the upgrade. You can execute the
software upgrade procedure yourself.
Be aware that the content of this document is addressing
technical or software skilled users.
Preparing a portable memory (not supplied) for
software upgrade
For the procedure you will require:
• A personal computer with web browsing capability.
• An archive utility that supports the ZIP-format (e.g.
WinZip for Windows or StuffIt for Mac OS).
• A preferably empty USB memory stick.
Note: Only FAT/DOS-formatted portable memory is
supported.
New software can be obtained from your dealer or can be
downloaded from the www.usasupport.magnavox.com web site:
Go to www.usasupport.magnavox.com using the web
browser on your PC.
2 Follow the procedure to find the information and the software
related to your TV.
3 Select the latest software upgrade file and download it to your
PC.
4 Decompress the ZIP-file and copy the file “autorun.upg” to the
root directory of the USB portable memory (not supplied).
Note: Only use software upgrades that can be found on the www.
usasupport.magnavox.com web site.
1
Verifying the version of the TV software
Settings
Installation
TV
Language
Setup
Autoprogram
Installation
Weak channel installation
Exit
Software upgrade
Before starting the software upgrade procedure, it is
advised to check what the current TV software is.
2 Select Software Upgrade in the Installation menu.
Press the cursor right.
The Software Upgrade menu moves to the left panel.
3 Select Current Software Info to observe the version and the
description of the current software.
1
Info
44
Automatic software upgrade procedure
1 Power off your TV and remove all memory devices.
2 Insert the USB portable memory (not supplied) that contains the
Software Upgrade Application
Please wait ...
Software Id:
TL32E-234
Loading
Done
Validating
Done
Programming
downloaded software upgrade.
3 Switch on your TV with the power switch at the right side of the
TV.
4 At startup the TV will scan the USB portable memory (not
supplied) until it finds the update content. The TV will
automatically go to the upgrade mode. After a few seconds it will
display the status of the upgrade procedure.
Warning:
• You are not allowed to remove the USB portable memory (not
supplied) during the software upgrade procedure!
• In case of a power drop during the upgrade procedure, don’t
remove the USB portable memory (not supplied) from the TV.
The TV will continue the upgrade as soon as the power comes back.
• If you try to upgrade to a software version lower than the
current version, a confirmation will be asked. Down grading to
older software should only be done incase of real necessity.
• If an error occurs during the upgrade, you should retry the
procedure or contact your dealer.
5 When the software upgrade was successful, remove the USB
portable memory (not supplied) and restart your TV with the
power switch at the right side of the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV
software from your USB portable memory (not supplied).
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file in a
Settings
Installation
Software upgrade
Language
Current software info
Autoprogram
Local upgrades/applications
Weak channel installation
1
Software upgrade
2
Info
3
directory called “Upgrades” located in the root of the USB
portable memory (not supplied).
Insert the portable memory (not supplied) that contains the downloaded software upgrade.
Select Software Upgrade in the Installation menu. Go to Local
upgrades/applications. The TV will list all compatible images
available on the USB portable memory (not supplied) and display
the data for each selected upgrade image.
Select the correct upgrade image and press the red color button to
start the upgrade. Your TV will restart and will automatically go to
the upgrade mode. After a few seconds it will display the status of
the upgrade procedure.
Warning:
If you try to upgrade to a software version equal or lower than the
current version, a confirmation will be asked. Downgrading to older
software should only be done in case of real necessity.
4
When the software upgrade was successful, remove the USB
portable memory (not supplied) and restart your TV with the
power switch at the right side of the TV. Your TV will start up
with the new
software.
45
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display
MAGNAVOX warrants this product against defect in
material or workmanship, subject to any conditions set forth
as follows:
PROOF OF PURCHASE: You must have proof of the date
of purchase to receive repair on the product. A sales receipt
or other document showing the product and the date that
you purchased the product as well as the authorized retailer
included, is considered such proof.
TO OBTAIN WARRANTY SERVICE IN THE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
COVERAGE:
(If product is determined to be defective)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER. MAGNAVOX SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION
TO THE DURATION OF THIS WARRANTY.
TO OBTAIN WARRANTY SERVICE IN CANADA…
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
LABOR: For a period of ninety (90) days from the date of
purchase, Magnavox will repair or replace the product, at its
option, at no charge, or pay the labor charges to any Magnavox
authorized repair facility. After the period of ninety (90) days,
Magnavox will no longer be responsible for charges incurred.
PARTS: For a period of one (1) year from date of purchase,
Magnavox will supply, at no charge, new or rebuilt replacement
parts in exchange for defective parts. Magnavox authorized
service centers will provide removal and installation of the
parts under the specified labor warranty.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. In addition, if you enter into a
service contract agreement with the MAGNAVOX partnership
within ninety (90) days of the date of sale, the limitation on
how long an implied warranty lasts does not apply.
DISPLAY: For a period of One (1) year from the date of
purchase, Magnavox will supply, at no charge, a new or rebuilt
active display device in exchange for the defective display.
Magnavox authorized service centers will provide removal and
installation of the parts under the specified labor warranty.
(PTV screens carry a thirty (30) day replacement warranty.)
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
• Product repair and/or part replacement because of
improper installation, connections to improper voltage
supply, abuse, neglect, misuse, accident, unauthorized repair
or other cause not within the control of Magnavox.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized,
or repair of products damaged by these modifications.
• Damage occurring to product during shipping when
improperly packaged or costs associated with packaging.
• Product lost in shipment and no signature verification of
receipt can be provided.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Products sold AS IS or RENEWED.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 671539, Marietta, Ga. 30006-0026
46
Download PDF

advertising