Kent KX 12SCA, KX 180SC Carpet Extractor Owner's Manual

KENT
OVWNER'S MANUAL
OPERATION « CARE - SERVICE
CARPET EXTRACTORS
KX-12SCA, KX-180SC
SELF-CONTAINED
115 & 230 VOLT
THE KENT COMPANY : P O BOX 1665 2310 INDUSTRIAL PARKWAY +: ELKHART, IN 46515, U 5 А
TEL (219)293-8661 » (800)334-1083 - FAX (21 9)295-8610- TELEX 25-8331 KENT CO ЕКА
TABLE OF CONTENTS
Machine Specifications ……….…..….…..….….….…errercarcreneeeneenenenentnnnennnmennnnnnÊŒsnnnnnnn 1
Optional ACCESSOFIES ….….…..….…..….…..…reccrrererrcenereaceeneneseraveneatesnen cine anne an sec rn cernes 2
Service Information …….……….....….......….….………cercrersrenssereercessasensauas an recserenre ces ce rene re reee: 2
Important Safety Instructions ......................eeee.e=recirreena DD De 2
Grounding Instructions.........................eeeeerierieene reee eee e ee 3
Unpacking And Set Up ...................e.....eereeeereeeieee Deere eee 3
Operation ..................eri.eeerrene nene ner tener en eerie nr ceer recen tener cenenrer e reee S 3
Adjustments..............-.—e=.emreciecee eee en ere ene ener nec neneecrenecane necia. 3
Features ...................ecemericceriererer eee renace econeena rre renceraeocencereentoretenenrererraer cone. 4
Controls ............_........e.ecccrinirccceen ener recarecca rene eee retener ene neeereneeerenreoeor reee 4
Cord Storage .................=eme.ereemeeeie een Ree eee eee Dre ree 4
Solution ..................e...eeerrecererererec ener ener een Tere ce Terence enero. 4
Carpet Extraction................—-..-.....eeeereine ene nen eee ener EEUEG 4
Clean Up And Storage......................—..e=.eve.eeree ee DR en RR 5
Maintenance EEE 5
Recommended Spare Parts .............................eeneieineercezen enero Dee 5
KX-12SCA Assembly .......................em0eimeeciine ie eN RD Re Dee 6
KX-12SCA Parts List ...................e.eeeecoverercerceic cero noe een ree eee er ve 7
KX-180SC Assembly ......................e..ese0verceereece ce en ee e Ren e Deer eee 8
KX-180SC Parts List......................e.eenccccorcircocenecrocan conan ee een e rene rene eee 9
Мис ОЛадгат........еоееннноееннсннсенноннееенеееннененнненннннненененененеенееннннннннннененнжее. 10
Hydraulic Diagram... ieee reese eres 10
Water Pump Assembly .............................00e0miiiee eee 11
Trouble Shooting ....................<ee.=reíieer e DÍ DR Ree eee ee 12
MACHINE SPECIFICATIONS
Model Number KX-12SCA / 115v KX-12SCA / 230v
Operating Voltage 115/1/60 230/1/50
Brush Motor 1/3 hp @ 1725 rpm 1/3 hp @ 1425 rpm
Vacuum Motor 1.8 php, 2-stage, bp 1.8 php, 2-stage, bp
Lift H20 (in/cm) 87" sealed/221 cm 94.1" sealed/239 cm
Brush Drive multi-v6 belt multi-v6 belt
Brush Dia. (in/cm) 2.25"/5.72 cm 2.25"/5.72 cm
Brush Rpm 1380 rpm 1140 rpm
Brush Length (in/cm) 10.93"/27.8 cm 10.93"/27.8 cm
Pickup Nozzle Opening 12.0"/30.5 cm 12.0"/30.5 cm
Pump Pressure (psi/bar) 60 psi/4.1 bar 60 psi/4.1 bar
Pump Flow Rate (gpm/ipm) — .87 gpm/3.29 Ipm .92 gpm/3.48 Ipm
Spray Nozzles three(3), 110° three(3), 110°
Pump Design self-priming, demand self-priming, demand
Solution Tank Cap. (gal) 5.0 gal./18.9 | 5.0 gal./18.91
Recovery Tank Cap. (gal) — 5.5 gal./20.81 5.5 gal./20.8 |
Wheels (in/cm) two 8" od/20.3 cm two 8" od/20.3 cm
Power Cord (f/m) 50 ft, 14-3 SJT (15.2 т) 50 ft, 14-3 SJT (15.2 m)
Length (inem) 37"/94 cm 37"/94 ст
Width @ Offset (in/cm) 14.4"/36.6 cm 14.4"/36.6 cm
Height (in/cm) 38.0"/96.5 cm 38.0°/96.5 cm
Machine Weight (Ibs./kg) 91 Ibs./41.3 kg 91 Ibs./41.3 kg
KX-180SC / 115v
115/1/60
1/3 hp € 1725 rpm
2.8 php, 3-stage, bp
117" sealed/297 cm
multi-v6 belt
2.25"/5.72 cm
1380 rpm
16.83"/42.7 cm
18.0"/45.7 cm
100 psi/6.9 bar
.96 gpm/3.63 Ipm
five(5), 110°
self-priming, demand
10.0 gal./37.8
10.0 gal./37.8 1
two 8" od/20.3 cm
50 ft, 14-3 SJT (15.2 m)
39.1"/99.3 ст
19.62"/49.8 cm
38.0"/96.5 cm
112 1bs./51 kg
KX-180SC / 230v
230/1/50
1/3 hp @ 1425 rpm
1.8 php, 2-stage, bp
94.1" sealed/239 cm
multi-v6 belt
2.25"/5.72 cm
1140 rpm
16.83"/42.7 cm
18.0"/45.7 cm
100 psi/6.9 bar
‚74 дрт/2.80 №т
five(5), 110°
self-priming, demand
10.0 gal./37.8 |
10.0 gal./37.8 |
two 8" od/20.3 cm
50 ft, 14-3 SJT (15.2 m)
39.1"/99.3 cm
19.62%/49.8 cm
38.0"/96.5 cm
112 1bs./51 kg
9-93
OPTIONAL ACCESSORIES
=
Hand Tool. PAN: 34911
Vacuum Hose 4 Solution Line. PIN: 33389-10ft,
33224-15ft.
12" Manual Wand. P\N: 33391
SERVICE INFORMATION
To obtain consistent performance over the life of your
Kent equipment, read through these instructions and
save them for future reference. If you require Service,
contact the dealer from which the machine was pur-
chased or an authorized service station. Always refer
to your limited warranty for complete service informa-
tion.
fo THE KENT CO. a
ELKHART, INDIANA USA
SERIAL NO. | MODEL
VOLTS | PHASE | HZ
MOTOR 1 AMP HP £
| MOTOR 2 AMP HP DD
The model, type, and serial number are indicated on
the data plate on the contro! panel of the carpet extrac-
tor. For prompt and complete service, refer to these
numbers when inquiring about service
Write the model and serial number of your
unit in the space provided. Refer to the
rating plate on unit.
MODEL # SERIAL 4
Retain thls owner's manual for future reference.
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS
CARPET EXTRACTOR.
WARNING
To reduce the risk of fire, electric shock, or injury:
e Do not leave the carpet extractor when plugged
in. Turn off all switches and unplug the electrical
cord when not in use and before servicing.
e Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
e Use only as described in this manual. Use only
manufacturer's recommended attachments.
e Do not use with damaged cord or plug. If carpet
extractor is not working as it should, has been
dropped, damaged, or left outdoors, return itto a
service center before using.
e Do not close a door on cord or pull cord around
sharp edges or corners. Do not run carpet extrac-
tor over cord. Keep cord away from heated sur-
faces.
Connect to a properly grounded outlet only (refer
to GROUNDING INSTRUCTIONS)
e Do not use extension coras or outlets with inade-
quate current carrying capacity
9-93
e Turn off all controls before unplugging.
es Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
e Do not handle plug or carpet extractor with wet
hands.
e Hold plug when rewinding cord onto cord reel. Do
not allow plug to whip when rewinding.
e Wind cord no tighter than necessary to retain it.
e Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce airflow.
This carpet extractor creates suction and con-
tains a revolving brush roll. Keep hair, loose
clothing, fingers, and all other parts of body away
from openings and moving parts.
e Do not pick up anything that is burning or smok-
ing, such as cigarettes, matches, or hot ashes.
e Belt pulleys can become hot during normal use.
To prevent burns, avoid touching the belt pulley
when servicing the drive belt.
* Use extra care when cleaning on stairs.
s Do not use to pick up flammable or combustible
liquids such as gasoline, or use in areas where
they may be present.
e Do not use in areas where flammable and/or
explosive vapor or dust is present to avoid possi-
bility of fire or explosion. Some cleaning fiuids
can produce such vapors.
e Store your carpet extractor indoors in a cool, dry
area. Do not expose carpet extractor to freezing
temperatures.
e Keep your work area well lighted.
SAVE THESE
INSTRUCTIONS
GROUNDING
INSTRUCTIONS
DO NOT USE IN CANADA!
To reduce the risk of electric shock, this appliance
must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for
electric current. This appliance is equipped with a cord
having an equipment grounding conductor and ground-
ing plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accord-
ance with all local codes and ordinances.
DANGER
improper connection of an equipment grounding con-
ductor can result in risk of electric shock. Check with
qualified electrician or service person if you are in doubt
as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance. If it will not
fit the outlet, have proper outlet installed by a qualified
technician. This appliance is tor use on a nominal 120
volt circuit and has a grounding plug that looks like the
plug illustrated in Figure 1. A temporary adapter which
looks like the adapter illustrated in Figure 2 may be used
to connect this plug to a two pole receptacle, as shown,
if a properly grounded outlet is not available. The tem-
porary adapter should be used only until a properly
grounded outlet, Figure 1, can be installed by a qualified
electrician. The green colored rigid ear, lug, or the like
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet
box cover. Whenever the adapter is used, it must be
held in place by a metal screw.
GROUNDED
OUTLET BOX
CC | |
7
' Lo
GROUNDING BLADE | a
IS LONGEST OF THE
THREE BLADES
GROUNDED
OUTLET BOX
iN
oA
LI
dS
f !
A
SCREW GROUNDING
TAB
UNPACKING AND SET UP
Carefully inspect all components to insure that there is
no concealed freight damage. If such damage is dis-
covered, file a Damage Report immediately with the
delivering carrier.
OPERATION
ADJUSTMENTS
BELT ADJUSTMENT: If belt adjustment is necessary,
remove cover and tighten the Belt Adjustment Screw
clockwise until tight (Figure 3).
9-93
EEE
1. BMPIOO4T
Figure 3
FEATURES
Your carpet extractor features recovery and solution
drain valves, located in the rear of the machine, and an
in-line solution tank filter. Your carpet extractor is also
equipped with an accessory inlet for the optional acces-
sories: Carpet Wand, Hand Tool, and Vacuum Hose &
Solution Line. For information on ordering any of these
accessories, refer to OPTIONAL ACCESSORIES.
CONTROLS
VACUUM SWITCH- This switch turns the vacuum
motor on (Figure 4). The recovery tank will instantly
operate under vacuum and the floor nozzle will be ready
for pick-up (extraction). For operation, the recovery
tank's drain valve must be closed (Figure 5) and its tank
lid in position over the sealing gasket (Figure 6).
Figure 4
PUMP SWITCHES- These switches turn the solution
pump on. For the operator's convenience, there are two
pump switches. One switch is located on the control
panel (Figure 4) and the other is located on the handle
(Figure 6). Once the control panel switch is switched to
ON, the pump will stay on until you switch it back to the
OFF position. The switch in the handle will only activate
the pump while the switch is depressed. The pump will
immediately shut off when the switch is released. The
pump will draw filtered solution, from the solution tank,
to the nozzles located beneath the frame. The nozzles
distribute the solution evenly over the carpet. Water
temperature in the solution tank must not exceed 130°F.
__ BMP10042
Figure 5
BRUSH SWITCH- This switch turns the brush on
(Figure 4). The rotation of the brush may propel the
machine, reducing the effort needed for operation. The
self propelling feature may change with different car-
pets.
MS EMP10043
Figure 6
CORD STORAGE
The cord can be either wound in a circle or wound
around the handle of the machine. Be sure to wind the
cord no tighter than necessary to retain it.
SOLUTION
The solution tank is the front blue tank. The solution
tank opening, where solution is added, can be found
under the clear lid on top of the machine. Remove the
clear lid and carefully pour the cleaning solution in.
Water temperature must not exceed 130°F.
CAUTION NOTE: USE NON-FOAMING CHEMICALS
ONLY. If a malfunction such as an overflow of the
recovery tank should occur, immediately shut off the
vacuum motor and pull the power cord plug from the
wall. The solution water should never be allowed to
enter the vacuum tube leading to the vacuum motor.
CARPET EXTRACTION
Plug the power cord into a 115V outlet. Once the
9-93
machine has power, the indicator light (Figure 4) will
glow. Fill the solution tank where the solution level can
be seen. Turn all switches on, using which ever pump
switch is more comfortable, and begin cleaning. Over-
lap cleaning paths moving at a slow steady pace. Once
the recovery water/foam level appears to be at the
bottom of the metal bracket, viewing into the recovery
tank through the clear lid, turn the solution pump and
brush motor off and empty the recovery tank into a
suitable water waste drain. To empty the recovery tank,
simply pull the "T" handle on the drain valve (Figure 5).
CLEAN UP AND STORAGE
Unplug carpet extractor from outlet when not in use.
Wipe exterior with a damp cloth after each use. Store
in a cool dry place. Do not expose to freezing tempera-
tures.
MAINTENANCE
Clean the water filter (Figure 7) from carpet fibers and
dirt after each use and/or when needed. Before and
after each use, check the vacuum opening, brush, noz-
Zles, and vacuum exhaust for lodged debris (Figure 8).
Keep the vacuum tube (Figure 6) clear from obstruction
before, after, and during use.
BMP10044
Figure 7
Figure 8
RECOMMENDED SPARE
PARTS
Recommended spare parts should be ordered and
stocked to avoid possible down time in case of failure,
breakage, or normal wear.
PART # DESCRIPTIONS QTY.
1 038982 Screen-filter 1
2 056099 Nozzle,spray tip (KX-12SCA) 3
2 056099 Nozzle,spray tip (KX-180SC) 5
3 024333 Water Pump-115v (60psi) 1
3 024346 Water Pump-230v (60psi) 1
3 033938 Water Pump-115v (100psi) 1
3 034339 Water Pump-230v (100psi) 1
4 034651 Brush,asm. (KX-12SCA) 1
4 034729 Brush,asm. (KX-180SC) 1
5 027034 Rkr Switch-115v Or 230v 3
6 055114 Belt (KX-12SCA) 1
6 055245 Belt (KX-180SC) 1
7 027021 Switch, handie 1
9-93
KX-12SCA ASSEMBLY
21
м „о 104
7 Pa AT
eT 7
pa 129
03
A
E
ALL
CES 95 47 40
> / „34
a
7
| Илл 92
33 34 35 36 H
== D — 89
31 [D] ON // 7 08
: y | © 2 Ч © 7 pd Bo
e SY 7 и
te У La и
Un.
KX-12SCA PARTS LIST
DESCRIPTION
QUANT
DET PART NO.
1 054726
2 055106
3 055092
4 004509
5 004207
6 550062
7 055105
8 005316
9 055104
10 027021
11 055103
12 034645
13 002248
14 055399
15 0055099
16 001461
17 222259
18 055282
19 224074
20 055090
21 055089
22 7223046
23 055391
24 w6S Yo!
25 055070
26 049999
27 111384
28 055093
29 1053094
30 025892
31 055382
32 7027035
32 027036
33 053133
34 0055071
35 0051082
36 098394
37 027034
38 055095
39 001283
40 003279
41 003453
42 034777
43 051581
44 055756
45 003429
46 006117
47 004253
48 002253
43 055389
50 024333
50 024346
51 055064
52 052894
53 005200
54 (052204
55 052338
56 002252
57 055415
58 034658
59 046688
60 001288
61 034657
62 055228
63 034651
055055
LABEL,INSTR--TILT/START 1X6.6"
COVER, TANK--TRANSPARENT MOLD
GASKET, FOAM--RECOVERY/EXTR
WSHR FLT .344iD1.000D.109T,BRS
WSHR FLT .2811D.5620D.063T BRS
SCR CAP HEX HD .250-20X.750L
CLIP,ARROW NYLON, .540L
SCR TPG F PAN HD 10-24X.375L
PLATE, STL--11GA FORMED
SWITCH,PUSH--WATERPROOF/MODIF
BUTTON,PLSTC--PUMP SW,EXTR
WDMT COVER--EXTR HANDLE
SCR MACH RD HD .250-20X.750L
WSHR FLT--1/4”SCR,RHIOCAPLUG
HANDLE--EXTRACTOR,MACH
SCR MACHRD HD 10-32X.625L
NUT HEX-- 10-32,SS
PLATE, SUPPORT--HANDLE,12"EXTR
WSHR SEAL .203ID SS
COUPLING,PIPE--MACH,1.25 SCH40
SCREEN,MESH--1.625 DIA.
SCR MACHRD HD 10-32X.375L
PLATE,STL--16GAX1.50X10.930
TANK, RECOVERY--MACH
VALVE,SLIDE--SHUTOFF,1.5PIPE,T
CLAMP HOSE--2.25 MAX DIA,WORM
BUSHING 1 7/32X3/16
TANK,SOLUTION--MACH
BSHG,STRAIN RLF--.31-.37 ACCOM
CORD,POWER--14-3,50FT,TERM RNG
COVER, REAR--.125ALUM,12"EXTR
LIGHT INDICATOR--125V,RED,HORZ
LIGHT INDICATOR--250V,RED,HORZ
FILTER WATER--IN-LINE STRAINER
ELBOW,STREET--1/2MPT X 1/2FPT
ADPTR,PP-HS--1/2 IPTX3/8HS,PLS
TEFLON TAPE-PIPE THD SEALNUT
SWITCH,RKR--SPST,16A,125/250V
BRACKET--FILTER
SCR MACH AD HD 10-24X.375L
NUT HEX-- 10-24 ZN PLT
NUT, SELF-RETAINING--10-24
WOMT,PANEL--12"EXTR
CLAMP,HOSE--.625 MAX DIA,WORM
TUBE,VINYL--.375X.625,3.50L,R
NUT,SPEED,U--.250-20,.58X1.125
ELBOW,PP-HS--3/8 MPTX3/8HS,NYL
WSHR LK .2041D.4100D.025T EXT
SCR CAP HEX HD .250-20X.750L
CAPLUGS PLSTC--WHITE
ASM,PUMP--WATER,115V,W/TERMS
ASM,PUMP--WATER,230V,W/TERMS
RD,STL--.500 DIA.X10.869L
WHEEL--MACH,8.0"O.D.
PIN,COTTER--.125X1.000 LONG
CAP,HUB--PLASTIC,3.680D,3.25BC
GROMMET, RUBBER--.87X1.12X.44TH
SCR MACH FLAT HD .250-20X.750L
HOSE VAC--1.5 DIA,40IN L,BLUE
WDMT FRAME--HOUSING,ALUM,12IN
CLAMP,HOSE--1.75 MAX DIA WORM
SCR MACH FLAT HD 10-24X.500L
ASM,VAC CHAMBER--12"EXTRACTOR
NOSE PIECE--KX-12SC,55
ASM,BRUSH--CYL,2.250DX12.115
BRUSH,CYL--2.250D X 12.115L
NR = AQ DA DANI A DANNN IL.
—
de A A ON DNS A a ONE AO AED О — ©
DET PART NO. DESCRIPTION QUANT
64 027197 BAG BALL--.3751D, .8750D,.281W 2
65 051846 RING,ATNG--EXT,.375 SHAFT,STL 2
66 054730 SEAL,GREASE--.875 OD X.375 1D 1
67 1055056 AXLE BRUSH--.3740D X 12.429 1
68 001289 SCR MACH RD HD 10-24X.500L 1
69 006126 ADPTR PP-HS--1/4 IPTX3/8HS BRS 2
70 1004499 WSHR FLT .5941D1.120D.063T STL 4
71 1034886 WDMT TUBE--SOL,1.0X1.0X7.787 1
72 056098 NOZZLE, SPRAY--110DEG, TIP REMOV 3
73 055723 TUBE, VINYL--.375X.625,27.00L,R 1
74 1025873 MTR,AC--115/60,.33HP MODIF 1
74 1025900 MTR,AC--220/240,50,.33HP MODIF 1
75 034648 WDMT PLATE W/NUT i
76 002408 PIN ROLL--.125 DIA, .750L 1
77 1002206 SCR MACHRD HD 10-24X1.00L 8
78 055390 WSHR FLT--410 SCREW,RHIOCAPLUG — 4
79 055108 BASE,MACH--KX-12SC 1
80 055114 BELT.V--6V'S, 19.00 PITCH LG 1
81 054011 PULLEY ,GRVD-- 6 GRV,1.00PD 1
82 034649 WDMT,TAKEUP--MOTOR BASE 1
83 003249 SCR CAP HEX HD .312-18X1.25L 1
84 003378 NUT, HEX LOCK--.312-18,ZN PLT 4
85 003246 SCR CAP HEX HD .312-18X1.00L 4
86 055110 PANEL, FRONT--11GA,STL,12"EXTR 1
87 055075 BRACKET, STL--2.31X2.15X5.75 1
88 034736 WDMT BRACE--CHASSIS,12"EXTR 1
89 055862 CAP.BOTTOM--SPLASH GUARD, EXTR 1
90 002278 WSHR LK .2621D.4890D.062TSPLT 4
91 005373 WSHR FLT .2811D.6250D.062T STL 4
92 002243 SCR CAP HEX HD .250-20X.625L 2
93 055109 BRKT, VAC MTR--ALUM 1
94 024214 MTR,VAC--115V,BYP,2 STG,DD 1
94 024341 MTR.VAC--240V, BYP 2STG,TD W/TB 1
95 002208 SCR MACH RD HD 10-24X1.25L 1
96 002467 SCR MACH PAN HD .250-20X1.25L 2
97 002454 SCR CAP HEX HD .250-20X1.50L 3
98 046309 SPACER,PHEN--.250X.500, .500L 3
99 005479 NUT HEX LOCK--.250-20,NYLOC ZN 3
100 055066 HOSE, VAC--1.5 DIA.,14 IN.,BLUE 1
101 055619 TUBE, VINYL--.375X.625,13.0L,R 1
102 054812 LABEL IDENT--KENT,DIE-CUT WHT 2
103 003416 SCR TPG F WSH HD 10-24X.875L 2
104 003406 NUT,HEX-- 10-24,SS 2
105 111625 WSHR FLT .5001D1.500D.062T NYL 1
106 055578 GUARD, THREAD--2.25 BRUSH 1
107 054799 PULLEY--BRUSH DRIVE, 1.250D,5GR 1
108 004238 WSHR FLT .5311D1.000D.071T STL 2
109 005449 WSHR SPR TNSN .5311D.8800D.030 2
110 050815 COUPLING,QUICK DISCONNECT--BRS 1
111 053901 GROM--1.93 1D,2.75 MHD,.125 PA 1
112 034776 ASM,COUPLER 8 ADAPTER--EXTR 1
113 706704 CUFF-HOSE SAME AS 16425 1
114 055601 TUBE, VINYL--.375X 625,8.50L.R 1
115 050826 BSHG STRAIN RLF--HEYCO SR-7W-2 1
116 025909 ASM,WIRE--SCNDCT,41,COMB 1
117 054577 TUBE, VINYL--.375X.625,14.62L,R 1
121 006108 NUT,SPECIAL--.500 PIPE,HEX LOC 1
123 004443 WSHR LK .2001D.375OD.022T INT 5
124 004524 WSHR LK .6751D.7770D.031T,INT 1
125 052016 ELBOW,PP-HS--1/4 MPTX3/8HS,BRS 1
127 054571 ELBOW,PP-HS--1/8MPTX3/8HS BRS 2
128 025967 VALVE,SOLENOID--220/50,240/60 1
128 025965 VALVE SOLENOID--115V,.156 ORI. 1
129 054583 PLUG EXPANSION--.75DIA,SNAPTIE 1
31 002371 SCR TPG F PAN HD 10-24X.625L 2
9-93
KX-180SC ASSEMBLY
KX- 180SC
TM-1418
123 124 125 —— 104
CA —
23 ee IA : N 43
1 8 , 29 , 25 = = > | E [3 N и 1 о,
2 Cr y" $ 126 =
55 — ON 2 DA
I . ‹ E. а
10 e 7 9899
111 N 95 47 40
15 NS 94
- —93
39 SS —
47
13
31 > AT
33 34 35 36 \ 20 01 92
A > — 89
‚ № yg A 118
Ke |
- 83
17
{ y -— .
= 4 N
72
N a) 45 120 74 75\ 76)
87 71
117
9-93
KX-180SC PARTS LIST
DET PART NO. DESCRIPTION QUANT
1 054726 LABEL,INSTR--TILT/START 1X6 6" 1
2 055106 COVER, TANK--TRANSPARENT MOLD — 1
3 055092 GASKET, FOAM--RECOVERY/EXTR 1
4 004509 WSHR FLT 3441D1 000D 109T,BRS 2
5 004207 WSHR FLT 2811D 5620D 063T BRS 2
6 50062 SCR CAP HEX HD 250-20X 750L 2
7 055105 CLIP,ARROW NYLON, 540L 4
8 005316 SCR TPG F PAN HD 10-24X 375L 6
9 055104 PLATE, STL--11GA FORMED 1
10 027021 SWITCH,PUSH--WATERPROOF/MODIF — 1
11 055103 BUTTON, PLSTC--PUMP SW,EXTR 1
12 034728 WDMT,COVER--EXTR HANDLE, 18" 1
13 002248 SCR MACH AD HD 250-20X 750L 2
14 7002271 SCR,MACH-RD HD-- 250-20X1 75L 4
15 055255 HANDLE EXTRACTOR,18" COATED 1
16 050208 WSHR LK 262ID 4700D 026T INT 4
18 006108 NUT,SPECIAL-- 500 PIPE, HEX LOC 1
19 224074 WSHR SEAL 203ID SS 3
20 055265 COUPLING, PIPE--MACH, 1 50 SCH40 1
21 055724 SCREEN ALUM--SOL INTAKE, 18EXTR 1
22 223046 SCRMACHRD HD 10-32X 375L 10
23 055256 PLATE, STL--16GA,BACKCOVER, 18" 1
24 055251 TANK, RECOVERY --MACH,18” EXTR 1
25 055070 VALVE SLIDE--SHUTOFF,1 SPIPE,T 1
26 049999 CLAMP HOSE--2 25 MAX DIA,WORM 1
27 111384 BUSHING 1 7/32X3/16 2
28 055250 TANK,SOLUTION--MACH, 18" EXTR 1
29 053094 BSHG,STRAIN ALF-- 31-37 ACCOM 1
30 025892 CORD,POWER--14-3,50FT,TERMRNG 1
31 055271 COVER REAR--PLATE ALUM, 18"EXT 1
32 027035 LIGHT,INDICATOR--125V,RED,HORZ 1
32 027036 LIGHT, INDICATOR--250V,RED,HORZ 1
33 053133 FILTER, WATER--IN-LINE STRAINER 1
34 055071 ELBOW STREET--1/2MPT X 1/2FPT 2
35 051082 ADPTR,PP-HS--1/2 IPTX3/8HS PLS 2
36 098394 TEFLON TAPE-PIPE THD SEALNUT
37 027034 SWITCH,RKR--SPST,16A,125/250V 3
38 034903 ASM BRACKET & NUTS--18"EXTR 1
39 005457 SCR MACH PAN HD 10-24X1 OOL 4
40 003279 NUT HEX-- 10-24, ZN PLT 6
41 003453 NUT, SELF-RETAINING--10-24 a
42 034775 WODMT,PANEL--EXTR, 18” 1
43 051581 CLAMP HOSE-- 625 MAX DIA WORM 14
45 003429 NUT, SPEED, U-- 250-20, 58X1 125 6
46 006117 ELBOW,PP-HS--3/8 MPTX3/8HS,NYL 2
47 004253 WSHR LK 204/D 4100D 025T EXT 11
48 002253 SCR CAP HEX HD 250-20X 750L 2
49 055389 CAPLUGS,PLSTC--WHITE 4
50 033938 ASM,PUMP--WATER,115V,W/TERM 1
50 034339 ASM,PUMP--WATER,230V,W/TERM 1
51 055252 RD,STL-- 500 DIA,13 728L 1
52 052894 WHEEL--MACH,8 0"0 D 2
53 005200 PIN,COTTER-- 125X1 000 LONG 2
54 052204 CAP, HUB--PLASTIC,3 680D,3 25BC 2
55 055434 GROM--1 01D,1 5MHD, 125 GROOVE
56 002252 SCR MACH FLAT HD 250-20X 750L 6
57 055415 HOSE VAC--1 5 DIA,40IN L,BLUE 1
58 034735 WDMT, FRAME--HOUSING ALUM, 18" 1
59 046588 CLAMP HOSE--1 75 MAX DIA, WORM 4
60 001288 SCR MACH FLAT HD 10-24X 500L 4
61 034773 ASM CASTING--18"EXTRACTOR 1
62 055261 NOSE, PIECE--KX-180SC,SS 1
63 034729 ASM,BRUSH--CYL,2 250D X 18 429 1
63 055259 BRUSH,CYL--2 2500 X 18 015L 1
64 027197 BRG,BALL- 375ID, 8750D, 281W 2
65 051846 RING, RTNG--EXT, 375 SHAFT,STL 2
1
055578
GUARD, THREAD--2 25 BRUSH
DET PART NO. DESCRIPTION QUANT
67 055258 AXLE BRUSH-- 37400 X 18 429 1
68 001289 SCRMACHRD HD 10-24X 500L 1
69 006126 ADPTR,PP-HS--1/4 IPTX3/8HS BRS 3
70 004499 WSHR FLT 594iD1 120D 063T STL 6
71 053896 TUBE,SOLUTION--1 0X1 0X15 00L
72 052016 ELBOW, PP-HS--1/4 MPTX3/8HS BRS 1
73 055723 TUBE VINYL-- 375X 625,27 DOL,R 1
74 025873 MTR,AC--115/60, 33HP,MODIF 1
74 025900 MTR,AC--220/240,50, 33HP, MODIF 1
75 034648 WOMT,PLATE W/NUT 1
76 002408 PIN,ROLL-- 125 BIA, 750L 1
77 002206 SCR MACH RD HD 10-24X1 O0L 4
78 055390 WSHR FLT--#10 SCREW,RHIOCAPLUG 4
79 1055249 BASE MACH--18" EXTR 1
80 055245 BELT V--6V'S,17 00 PITCH LG г
81 054011 PULLEY ,GRVD-- 6 GRV,1 00PD 1
82 034649 WDMT, TAKEUP--MOTOR BASE 1
83 003249 SCR CAP HEX HD 312-18X1 25L
84 003378 NUT HEX LOCK-- 312-18,ZN PLT 4
85 003246 SCR CAP HEX HD 312-18X100L 4
86 055244 PANEL,FRONT--11GASTL,18"EXTR 1
87 055075 BRACKET,STL--2 31X2 15X5 75 1
88 034734 WDMT BRACE--CHASSIS, 18"EXTR
89 055862 CAP,BOTTOM--SPLASH GUARD,EXTR — 1
90 002278 WSHR LK 2621D 4890D 062TSPLT 4
91 005373 WSHR FLT 2811D 6250D 062T STL 4
92 002243 SCH CAP HEX HD 250-20X 625L 2
93 055109 BRKT,VAC MTR--ALUM 1
94 024331 MTR VAC--115V,BYP,3 STG,TD 1
94 024341 MTR,VAC--240V BYP,2STG,TD W/TB 1
95 002208 SCRMACHRD HD 10-24X1 25L 1
96 055663 SPACER,RBR-- 500X 625X2 500L 2
97 002454 SCR CAP HEX HD 250-20X1 50L 3
98 046309 SPACER,PHEN-- 250X 500, 500L 3
99 005479 NUT HEX LOCK-- 250-20.NYLOC,ZN 3
100 055066 HOSE,VAC--1 5 DIA ,14 IN BLUE 1
101 054577 TUBE, VINY L-- 375X 625,14 E2L,R 3
102 054812 LABEL IDENT--KENT DIE-CUT, WHT 2
103 003416 SCR TPG FWSH HD 10-24X B75L 3
104 003406 NUT,HEX-- 10-24,SS 3
105 111625 WSHR FLT 500ID1 500D 062T NYL 1
106 001289 SCRMACHRD HD 10-24X 500L 1
107 054799 PULLEY--BRUSH DRIVE,1 250D,6GR 1
108 004238 WSHR FLT 5311D1 000D 071T STL 4
110 050815 COUPLING,QUICK DISCONNECT--BRS 1
111 053901 GROM--1 93 ID,2 75 MHD, 125 PA 1
112 034776 ASM,COUPLER & ADAPTER--EXTR 1
113 706704 CUFF-HOSE SAME AS 16425 1
114 024375 CAPACITOR--270-324MFD,220-250V 1
114 028798 CAPACITOR 1
115 052338 GROMMET,RUBBER-- 87X1 12X 44TH 1
116 025909 ASM WIRE--SCNDCT,41,COMB
117 056098 NOZZLE,SPRAY--110DEG.TIP REMOV 5
118 025859 CAP,CAPACITOR--2 O6D,PLSTC 1
118 051714 CAP,ELEC--CAPACITOR,MACHINED 1
119 054707 CLAMP,CAPACITOR--2 06D,GALV S 1
120 005480 NUT,HEX LOCK-- 10-24,NYLOC 1
121 002371 SCA TPG F PAN HD 10-24X 625L 3
123 054577 TUBE, VINYL-- 375X 625,14 62L,R 1
124 054571 ELBOW,PP-HS--1/8BMPTX3/8HS,BRS 2
125 025965 VALVE SOLENOID--115V, 156 ORI 1
125 025967 VALVE, SOLENOID--220/50,240/60 1
126 054583 PLUG,EXPANSION-- 75DIA,SNAPTIE 1
127 055724 SCREEN, ALUM--SOL INTAKE, 18EXTR 1
128 224012 WSHR FLT 2191D 5000D 065T STL 5
129 055811 EXTRUSION,VINYL--GASKET,18EXTR 1
30 054730 SEAL,GREASE-- 875 OD X 375 ID 1
9-93
WIRING DIAGRAM
HANDLE
POWER VACUUM PUMP BRUSH
| | | Г
WHITE BROWN
RED
_ /
,
м Менее”
| WHITE
BLACK )
ORANCE
115/1/60 | WHITE BROWN
240/1/50
POWER CORD = | GREEN | RED
TM—1416
CAPACITON
р
HYDRAULIC DIAGRAM
WATER SOLUTION
TANK
- - - - - - - - - 7 - 7 - ELECTRIC VALVE
TT = о -
ZN | | ©
7 | FF
FILTER WATER PUMP
COUPLER
ИМИ ХИ ХИ ХИ Хх
NOZZLES
10
WATER PUMP DIAGRAM
Part Number* 1 24333 24346 33938 34339
Shurflo Part No. 8000-232-236 8000-791-946 8000-713-938 8000-701-238
Psi 60 60 100 100
Voltage 115 230 115 230
Pressure Switch 2 39502 39502 39503 39503
Check Valves 3 39348 39348 39348 39348
Housing 4 39358 39358 39359 39359
Valves 5,6 39504 39504 39504 39504
Diaphragm 7 39343 39343 39343 39343
Drive Asm. 8 39360 39361 39362 39361
Motors W/rectifiers 9 39347 39363 39349 39363
*. NO. 1 is the complete pump assembly.
**. Replacement rectifiers are only for motors with an external rectifier.
The later designed motors have an internal rectifier, these rectifiers are not replaceable.
9-93
11
TROUBLE SHOOTING
PROBLEM
Belt squeaks.
Solution leaks through nozzles while the
machine is off.
No solution through nozzies when the
pump switch is depressed.
Uneven solution spray pattern.
Machine isn’t removing old rug stains.
Machine doesn't extract enough water
from solution soaked carpet.
Solution or foam Is entering vacuum
port.
Indicator light not lit.
Leaking drain valve.
Brush motor runs but brush doesn’t
spin.
CAUSE
1. New machine.
2. Brush drive belt may be loose
1. Check valve may be clogged.
1. Hose, filter, check valve, or nozzles may be
clogged
2. Water pump may not be operating.
3. Water pump may have failed.
4. Solution tank may be empty.
1. Nozzle, nozzle tip, or filter may have lime or
soap build up
1. Nozzle tips may be worm.
2. Stain may need to be pretreated with cleaning
chemicals.
1 Vacuum motor may have failed
2 Gasket may be leaking
3. Hose may have loose connection or the suc-
tion nozzle may be obstructed
4. Vacuum tube (Figure 6) may be obstructed.
5. Drain valve may be open or leaking.
6. Hose may be damaged.
1. Recovery tank may be overflowing into the
vacuum tube.
2. Tube connections may be leaking.
1. Power cord may not be plugged in.
2 Power source may not have power.
3. Indicator ight may have failed.
1. Valve seal may be obstructed with debris.
2. Valve seal may be worn.
1. Brush drive belt may be loose.
2. Brush drive belt may be broken.
3. The roll pin located inside the motor pulley
may be broken.
SOLUTION
1 Tip machine slightly back to start for the first
minute or two of use
2 Remove cover and turn the Belt Adjustment
Screw clockwise until ight
1 The check valve needs to be cleaned or re-
placed
1 Clean hose, filter, check valve,or nozzies
2 Check switch and wiring for failures
3 Replace pump
4. Fill tank with solution
1. Unscrew the nozzles and ciean with vinegar.
Do not use an object that may scratch or
punch through the nozzle opening Entarg-
ing the opening may waste water
1 Replace nozzle tips making sure alignment al-
lows spray to form a straight ine
2. Carefully pretreat all stains using recom-
mended chemicals and methods before ex-
tracting
1. Repair or replace vacuum motor
2 Locate torn or missing gasket and replace
3. Connect loose hose or remove obstruction
4. Clear vacuum tube screen of obstruction
5 Close or replace valve
6. Repair or replace hose
1. Use non-foaming chemicals and do not let re-
covery tank capacity surpass the recom-
mended level (see CARPET
EXTRACTION)
2. Reseal tube connections
1. Plug cord into appropriate outlet
2 Check outlet for power Note. This machine is
not equipped with a breaker/fuse
3. Replace indicator hght
1. Clear valve seal from dirt and debris
2. Replace valve
1. Remove cover and turn the Belt Adjustment
Screw clockwise until ight
2. Replace belt
3. Replace roll pin (detail 76 in illustration)
9-93
12
THE KENT LIMITED WARRANTY
Your Kent equipment which has been manufactured, tested, and inspected in accordance with carefully specified engineering requirements, IS
warranted to be free from defects in material and workmanship This warranty 1s, however, subject to the following qualifications, conditions and
limitations which are set forth to provide you and all users of the equipment with information concerning the duration, extent, availability and
applicability of the Kent limited warranty, the procedure to be taken to obtain its performance and other information concerning the Kent warranty
policy
The Kent Limited Warranty is Extended to the Original End User as Follows:
All Kent cord electric machines with the exception of upright and two motor upnght vacuums have a three year warranty on parts and one year labor
coverage Upright and two motor upnght vacuums have a one year parts and labor warranty Motor and gear unit assemblies on 175 RPM floor
machines carry a warranty of five years
Poly components carry a ten year replacement warranty with one year service labor This warranty will not cover damage attributable to the
following
« Improper, unreasonable or negligent use or abuse of the equipment
e Use of the equipment with hot water ( over 130 deg F, 54 deg C)
e "Warpage”, “Creepage", or “Distortion” of the part so long as the same does not interfere with normal operation
e Abrasions or punctures of the equipment
The start date of the warranty coverage shall be the date the machine was shipped from the factory, or with proof of purchase, the purchase date of
the onginal end user The start date of the warranty shall not exceed one year from the ship date from the factory
Parts of Kent Equipment Not Covered by the Kent Limited Warranty
Certain parts of Kent Equipment require replacement in the ordinary course of use due to normal wear by reason of their charactenstics These are
normal wear items such as cords, squeegee blades, belts, gaskets, bumpers, carbon brushes, filters, hoses, bags, etc
Exceptions and Exclusions from Warranty
This equipment Is required to be used on electric current as indicated on the dataplate Otherwise damage, defects, malfunctions or other failures of
the equipment arising from the use on electric current not as indicated are excepted and excluded from this warranty Defects, malfunctions, failure,
or damage of the equipment caused by improper, unreasonable or negligent use or abuse of the equipment are likewise excluded from this
warranty. If repair is done to the equipment by anyone other than those designated as authorized to perform such work without having obtained
factory authorization in writing, the Kent Company at its sole option, may determine that this warranty will not apply and that reimbursement for
such repair will not be made because of the failure to comply with such factory instructions
Procedure to Be Taken to Obtain Performance of Warranty Repair
To secure repair of the equipment or any warranted parts under this warranty, the following procedure must be taken The inoperative equipment or
warranted parts together with satisfactory evidence of the purchase date, must be delivered, with shipping and delivery charges prepaid, to one of
the following
e The dealer from whom purchased
e Any Kent distributor's service department in the United States
e Any Kent authorized service station in the United States
If you are unable to locate any of the above, you may write or otherwise communicate with The Kent Company for instructions before repair service
is performed by anyone else In such event, The Kent Company will provide either the location of a closely available Kent service department or
other factory instructions In the event that no closely available service department is available, Kent at its discretion will repair or replace the part or
equipment at the factory, the products will be returned to the owner freight prepaid No warranty will be honored without proof of purchase, the
model number and serial number if applicable
Replacement
In the event of a defect, malfunction or failure of your Kent equipment or any warranted part to conform with this warranty, The Kent Company may,
at its sole option and own expense, replace the equipment or any warranted part with another new identical or reasonably equivalent model or part
in lieu of repainng the defect
No Refund of Purchase Price
The Kent Company will not, as a matter of its warranty policy, refund the customer's purchase price
Warranty Registration
Your Kent Company distributor from whom you purchased your equipment 1s responsible for the registration of your warranty with the factory We
ask that you cooperate with your distributor in supplying the necessary information on the warranty card so that we may better serve you Any
information or questions that you may have concerning your Kent equipment or this warranty may likewise be obtained from the factory This
warranty gives you specific legal nghts and you may also have other rights which vary from state to state
12/13/96 83251