Pro Foos III coin
Assembly Instructions
Thank you for purchasing a Shelti product. All of us at Shelti want you to be completely satisfied with
your Pro Foos game, so feel free to contact us for help with the assembly of your product, Shelti parts,
or other information you may require.
Tools Required:
1/2" Wrench
3/4" Wrench
7/16" Wrench
Hammer
Phillips screwdriver
Level
STEP #1
•
Open the Pro Foos III cabinet bottom box and remove the following parts.
Description
A - Shelti Soccer Leg Assembly - Right
A - Shelti Soccer Leg Assembly – Left
A - Long Ball Return
A - Short Ball Return
B - Accessories Package
5/16" Flat Washer
5/16" Hex Nuts
Score Posts
Score Rods
Red Score Beads
Black Score Beads
#8 x 2" Wood Screw
Spirol Pin Punch
Super Lube Tube
Balls
1/4" x 20 Cap Nut
Rod Block
10/32 1 ¼” round head bolts
#10 flat washers
Part Number
Quantity
AS-SSR-0
AS-SSL-0
AS-LBR-0
AS-SBR-0
BS-ASA-0
303-0002-0
302-0002-0
201-0006-0
205-0007-0
003-0002-0
003-0003-0
304-0005-0
210-0012-0
210-0002-0
201-0007-0
302-0003-0
102-0070-0
301-0008-0
303-0006-0
2
2
1
1
1
8
8
4
2
5
5
4
1
1
5
2
1
4
8
STEP #2 – Leg Assembly
•
•
Turn the Pro Foos game upside down.
Assemble the legs using the holes in the leg pads. Tighten nuts with a 1/2" wrench.
2
Step #3 – Cabinet Top & Bottom Assembly
•
•
•
•
Open the cabinet top box.
Lift the cabinet top into a vertical position and slide the hinges onto the cabinet bottom
hinges.
Lift the prop stick into a vertical position and secure the top in a open position.
Tighten the two cap screw nuts onto the cabinet top / cabinet bottom hinge.
Cabinet Top
Prop Stick
Install Cap
Nuts Here
•
•
Install the long & short ball returns as shown.
Close and lock the cabinet top.
Long Ball Return
Short Ball Return
3
STEP #4 – Score Post & Rod Assembly
•
•
•
Assemble the score posts - score rod - beads.
Screw the score posts to the top of the game.
The black scoring assembly contains 4 black beads and 1 red bead and should be placed at the end
of the table where the black goalies are located. The odd colored bead signifies the final point and
should be placed so that it is the last bead pulled toward you (the black team). The red team
scoring assembly on the other side is just the opposite.
Black Goalie End Of Game
4 – Black Beads
1 – Red Bead
Opposite End Of Game
4 – Red Beads
1 – Black Bead
STEP #5 – Level The Game
•
•
Turn the leg levelers in or out of the leg until the ball rolls true on the play surface.
For more precise leveling, use a level. Place the level horizontally on the playing surface pointing
toward the goal openings. Be sure all the levelers are screwed all the way in as a starting point.
Turn the leg levelers up equally on one end until you are horizontally level. Then turn your level
90° so it is pointing toward the ball server holes. Now turn the levelers up on one side of the table
until you are vertically level.
4
STEP #6 – Install The Coin Mechanism
•
•
Install the coin chute assembly using the hardware provided.
Connect the counter spring to the counter as shown.
Counter Spring
12345
12345
STEP #7 – Lubricate The Rods / Bearings
•
Push the rod away from you until the bumper hits the opposite wall. Apply two or three drops of
lubricate on the face of the bearing and rod using the Super Lube Tube furnished with the game.
Rotate the rod while pulling the rod toward you to evenly spread the lubricant on the rod. Perform
the same operation on the opposite bearing face and rod. Repeat as needed.
5
STEP #8 – Rotating The Bushings
•
Once a year the bushings should be rotated 180 degrees to assure an even wear of the bushing
surface. To accomplish this rotation remove the rods from the game and push a 7/8" socket head
over the bushing fingers (Drawing - A). Push the bushing out of the hole and rotate the bushing
180 degrees (Drawing - B). Snap the bushing back into place and return the rod and men to the
game.
7/8 "
7/8 "
Drawing - A
7/8 "
Drawing - B
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement