g o l a t a c 4 1 0 2 o r p t c du table of contents new products ..........................................3 about fuel safe.......................................4 glossary....................................................5 pro cell®....................................................6 sportsman® cell / flex fuel Cell®......7 enduro cell® / core cell.......................8 race safe racing cells®.........................9 sprint / midget / micro fuel cells... 10 off road fuel cells............................... 11 porsche fuel cells............................... 12 porsche accessories.............................13 early model mustang fuel cells .... 14 late model mustang fuel cells ....... 15 nascar® series....................................... 16 “ dirt series: late model / modified...17 WE HAVE REACHED A LEVEL OF SUCCESS in this sport where we expect to perform at the highest level. Fuel Safe helps us compete for wins and ultimately championships. I’ve used Fuel Safe products for more than a decade and believe their fuel cell and bladder system is one of the best out there. Reliability and performance are key in Sprint car racing and FUEL SAFE DELIVERS.” — Donny Schatz, 2012 WoO Sprint Car Champion custom fuel cells ................................ 18 specialty fuel cells / vintage / formula ............................... 19 replacement bladders.......................20 replacement cans / foam................... 21 collectors / surge tanks...................22 fill plates ..............................................23 fill valves / bulkhead fittings.........24 vent valves / vent filters..................25 pumps / pickups / wiring harness....26 fill caps...................................................27 fill equipment / dry breaks..............28 fire bottles / senders / misc............29 marine fuel cells.................................30 industrial applications...................... 31 Enduro Cell®, Fire Safe®, Flex Fuel Cell®, Fuel Safe®, Fuel Safe Custom Works®, Heat Safe®, Pro Barrel®, Pro Cell®, Outlaw®, Race Safe Racing Cells®, Safe 7 System®, Sportsman®, The Dominator Cell®, Tough Cell®, Ultra Cell®, Ultra II Cell® and Xtreme Cell® are trademarks of Aircraft Rubber Manufacturing, Inc. NASCAR® is a registered trademark of the National Association for Stock Car Auto Racing, Inc. “ Thanks to the guys at Fuel Safe for keeping my last minute builds on schedule and leading the way in not only the safest but most dependable technology in the industry” — Shannon Campbell, 2011 King of The Hammers ULTRA4 Champion 3 ED128DLM Dirt Late Model Cell See page 17 Flex Fuel Cell® OR140TE and OR150TE Off Road Enduro Truck Cells See page 11 NASCAR EFI Plate See page 7 SA125 Ultima Cell See page 16 See page 19 SA124 BMW E30/E46 Fuel Cell See page 19 SA122 Generation 5 Camaro Fuel Cell See page 19 Aluminum Containers for CB300 / CB400 series Wedge Cells See page 19 “ In twenty years of building off road race cars I have seen everything you can imagine get destroyed beyond use, with one exception: Thank you Fuel Safe!” — Steve Silverthorn, Jimco Racing General Manager SFP240-C Carbon Fiber Fill Plate See page 10 4 about fuel safe §§ We have 30 years experience building the Best for the Best! §§ We build Safety, Durability and Performance into every fuel cell. §§ Our cells are proudly Made in the USA. §§ Fuel Safe is ISO 9001:2008 certified – your guarantee of quality. §§ We use the highest quality materials on standard cells, including: Aircraft grade aluminum nut-ring ¨¨ Billet aluminum fill caps ¨¨ FIA/SFI approved materials ¨¨ §§ Full CAD/CAM capabilities. §§ Fuel Safe’s lead times are the shortest in the industry. §§ We are Racers! Our sales team is staffed by racers who understand your needs. §§ We are customer focused – we’re here to help you win! §§ Champions choose Fuel Safe! Our products meet the demanding certification requirements of SFI and FIA and are approved for use in: §§ ALMS/TUDOR SERIES §§ DAKAR RALLY §§ NASA §§ ULTRA4 §§ ARCA §§ GRAND AM §§ NASCAR® §§ USAC §§ ASCS §§ IMSA §§ SCCA §§ WORLD OF OUTLAWS §§ BITD §§ LOORRS §§ SCORE §§ WRC OUR STANDARD FUEL CELLS §§ Pro Cell® Racing Cell: FIA-FT3 certified, suitable for all hydrocarbon fuels and alcohol blends, soft bladder design, extremely durable. §§ Core Cell: FIA-FT3 certified, same as Enduro Cell® but without a container, best value in a certified cell. §§ Sportsman® Cell: FIA-FT3 certified, suitable for all hydrocarbon fuels , soft bladder design, light weight and durable. §§ Race Safe Racing Cell®: Compatible with all types of fuel, molded “hard rubber” design for the racer who does not need a certified cell. §§ Flex Fuel Cell®: FIA-FT3 certified, suitable for all hydrocarbon fuels and alcohol, soft bladder design, extremely light weight. §§ Ultra II Cell®: Meets FIA-FT3, suitable for hydrocarbon and alcohol fuels, extremely light weight soft bladder design. §§ Enduro Cell®: FIA-FT3 certified, compatible with all types of fuel, molded “hard rubber” design, very durable and cost effective. §§ Specialty Application Fuel Cells: Porsche, Mustang, Corvette, Lotus, Camaro and more! All designed with our FIA-FT3 certified Pro Cell bladders - see pages 12-19 for details. Standard Style Fill Plate (-8 fittings standard) SA100 17 gallon Porsche 911 Fuel Cell Standard Remote Style Fill Plate (-8 fittings) Pick-up fitting In-Tank Vent Valve Fill Cap Threaded Fill Neck Standard Fill Plate Return fitting Sender Provision Sender Provision In-tank vent valve Multi-location fill plate (6 x 10) Remote fill valve (Ø2.25") Pickup fitting Return Fitting glossary EXTERNAL FLANGE: Can flange that extends outward and provides a flat surface for bolting the can lid to the can body and can be used to mount the can in the vehicle. 4 X 6 PLATE: A standard size, 12-bolt oval plate which covers a 4” by 6” hole; the plate measures approximately 5” x 7”. 6 X 10 PLATE: A standard size 24-bolt oval plate that covers a 6” by 10” hole; the plate measures 7.625” x 11.625”. ALCOHOL FUELS (METHANOL, ETHANOL): This fuel can be harmful to safety foam and certain bladder materials; aluminum hardware should be treated. AN FITTINGS: A mil spec standard for fitting sizes. AN fittings and NPT fittings are not interchangeable. A dash in AN terminology is the hose size the fitting is designed to work with. Each dash represents 1/16 of an inch; e.g., a -8 fitting equals 8/16 or a ½” hose, a -12 equals 12/16 or a ¾” hose. ANODIZING: A protective treatment for aluminum that increases resistance to corrosion, chemicals and wear. FILL PLATE: A steel or aluminum plate that typically has a fill neck, fuel pickup fitting, vent fitting, provisions for a sending unit and wire harness. Fill plates come standard with all of our complete catalog fuel cells. POWDER COATING: A protective coating that is electrostatically applied to steel or aluminum forming a very durable layer shielding the metal against scratches and corrosion. RAW: Untreated plates and fittings, no surface finish applied. (Do not use with alcohol.) FLAPPER VALVE: A rollover check valve used in standard fill applications. REMOTE FILL: A refueling setup that allows the cell to be filled from a location not on the cell. FOAM BAFFLING (SAFETY FOAM): Minimizes fuel slosh while providing explosion resistance. RETURN: A fitting or hose through which excess fuel is sent back to a cell. HEIGHT: The measurement from top to bottom of the bladder or container listed. SAFETY FUEL CELL: A safety fuel cell is a fuel containment system that typically includes four main components; a steel or aluminum container (the can), a fuel bladder (this provides the crash protection), safety baffling foam (for fuel slosh mitigation and explosion protection), and a fill plate. (See photo below) HYDROCARBON FUELS (GASOLINE, DIESEL, AVGAS): A fuel that requires specific materials to be used in the construction of a fuel cell. This fuel will damage alcohol-specific bladders. BAFFLE (BLADDER MATERIAL): Deflects fuel surge in a cell for better performance. PICKUP: A device inside the cell that picks up fuel and delivers it to the outlet. SENDER (FUEL LEVEL SENDER): Typically an electronic item that measures fuel level. Specify ohm range (empty to full). B.C. (BOLT CIRCLE): The diameter of an imaginary circle drawn through the center of each bolt hole; also referred to as the bolt pattern. INTERNAL FLANGE: A can flange that extends inward to provide a flat surface to bolt on a can access cover. BUNG: A weld-in threaded fitting that will accept AN or pipe fittings; must specify AN or NPT and size. LENGTH: The measurement from right to left. SHOE BOX LID: A lid that fits over the container but is not physically connected. NIPPLE: A fabric reinforced flexible rubber outlet or inlet into which a tube can be clamped. SLIP-IN BOTTOM: Container bottom not physically attached to the can. NUT-RING: A ring of nuts installed on the inside of a bladder securing an external plate with a series of bolts. STANDARD FILL: A refueling setup that incorporates a cell mounted fill neck and cap. CAN: The enclosure (container) that provides containment and protection for a bladder, usually metal. CHECK BALL/CHECK VALVE: A device that allows flow in one direction only. COLLECTOR/SURGE TANK: An area within a cell that traps/contains fuel to ensure steady supply and maximum usage. DRY BREAK VALVES: Valves that form a leakproof connection for rapid refueling. ORIENTATION: Orientation is as the driver sits; the left side of the car is the driver’s left. OUTLET: A fitting or nipple on the fuel cell through which fuel is drawn out of the fuel cell and delivered to the engine; e.g., a fuel outlet fitting. VENT VALVE: A valve that allows air to enter or exit a fuel cell. Most vent valves employ some type of rollover protection ( a check valve) that prevents fuel loss in the event of a vehicle rollover. WIDTH: The measurement from front to back of the cell. SAFETY FUEL CELL COMPONENTS (Pro cell bladder shown) BLADDER FOAM CAN NUT RING GASKET TABS BOLT KIT FILL PLATE FUEL PICKUP 5 6 pro cell PRO CELL® Pro Cell’s unique, seamless coating design produces unmatched durability and safety in a racing fuel cell. Pro Cell® meets all FIA-FT3 requirements and is compatible with all hydrocarbon fuels and alcohol blends up to and including E85. Fuel Safe’s Pro Cell® is the fuel cell of choice for top off road, road race and circle track racers around the globe. Pro Cell® racing cells come fully assembled and include the following components: §§ FIA-FT3 certified Pro Cell® bladder §§ Powder coated 20 gauge steel container with external mounting flange §§ Full safety foam baffling suggested upgrades include: §§ Surge tank/Collector §§ Light weight aluminum fill plate §§ Sending unit §§ Fuel pickup assembly, plumbed to right rear of cell §§ Fuel pump(s) §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ Lightweight aluminum container An ideal upgrade is the Surge tank/Collector See page 22 §§ Remote fill options Optional FPHP high pressure pump See page 26 §§ 2 year warranty See the parts pages for a complete listing of all available accessories. COMES STANDARD WITH A light weight anodized aluminum fill plate with -8 fittings and threaded billet aluminum fill cap Aluminum plate - Part No. SF6X10E-A Complete Fuel Cells- FIA Approved Pro Cell Part No. Sportsman Part No. Flex Fuel Part No. Notes Approx. Capacity PC105 SM105 FF105 PC108A PC108B PC110 PC112 PC115 PC115-06 PC117 PC118A PC118B SM108A SM108B SM110 SM112 SM115 SM115-06 SM117 SM118A SM118B FF108A FF108B FF110 FF112 FF115 FF115-06 FF117 FF118A FF118B PC118C SM118C FF118C PC122A PC122B PC122C *PC122E PC124 PC126 PC129 PC132A PC132B PC144 SM122A SM122B SM122C *SM122E SM124 SM126 SM129 SM132A SM132B SM144 FF122A FF122B FF122C *FF122E FF124 FF126 FF129 FF132A FF132B FF144 4X6 Steel Plate, -6 Ftgs 5 gal/19 L 8 gal/30 L 8 gal/30 L 10 gal/38 L 12 gal/45 L 15 gal/56 L 15 gal/56 L 17 gal/64 L 18 gal/68 L 18 gal/68 L Vert. End 18 gal/68 L Flange 22 gal/83 L 22 gal/83 L 22 gal/83 L End load can 22 gal/83 L 22 gal/83 L 26 gal/98 L 29 gal/109 L 32 gal/121 L 32 gal/121 L 44 gal/166 L Length Width Height 13.625" 13.625" 8.375" 20.750" 20.125" 25.625" 20.750" 26.000" 24.625" 20.125" 28.000" 33.500" 16.000" 12.125" 10.125" 17.875" 17.875" 17.125" 17.125" 17.125" 20.000" 7.750" 8.625" 10.125" 9.500" 9.500" 9.125" 12.750" 9.875" 6.500" 33.500" 20.000" 6.500" 34.000" 25.500" 25.750" 33.625" 25.000" 26.250" 24.250" 34.500" 26.250" 25.750" 18.000" 17.125" 25.750" 17.000" 16.750" 17.875" 24.250" 17.875" 17.750" 25.750" 9.500" 13.750" 8.500" 9.250" 13.625" 14.500" 12.750" 14.625" 18.500" 17.000" Capacities are approximate. L x W x H are can dimensions and do not include 1” container flange. Verify size before ordering. * ADD –QF for Quick-Fill plate. fuel safe racing products 800-433-6524 www.fuelsafe.com email@example.com sportsman® cell/flex fuel cell 7 SPORTSMAN® CELL The Sportsman® Cell is our light weight soft bladder fuel cell. The Sportsman® cell meets all FIA-FT3 requirements and is designed for use with all hydrocarbon fuels. Sportsman® bladders are constructed with a proprietary coated fabric that offers a great balance of performance and price. Sportsman® racing cells come fully assembled and include the following components: §§ FIA-FT3 certified Sportsman® bladder §§ Powder coated 20 gauge steel container with external mounting flange §§ Full safety foam baffling suggested upgrades include: §§ Light weight aluminum fill plate §§ Surge tank/collector §§ Fuel pickup assembly, plumbed to right rear of cell §§ Sending unit §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ Fuel pump(s) §§ 2 year warranty §§ Lightweight aluminum container §§ Remote fill options BOTH COME STANDARD WITH A light weight anodized aluminum fill plate with -8 fittings and threaded billet aluminum fill cap Aluminum plate - Part No. SF6X10E-A See the parts pages for a complete listing of all available accessories. THE FLEX FUEL CELL® The Flex Fuel Cell® is the first (and only) flexible racing bladder compatible with hydrocarbon and alcohol fuels. The Flex Fuel Cell® meets all FIA-FT3 requirements. Constructed with a proprietary coated fabric, it is the lightest weight and most pliable bladder on the market. Flex Fuel Cells® come fully assembled and include the following components: §§ FIA-FT3 certified Flex Fuel bladder §§ Powder coated 20 gauge steel container with external mounting flange §§ Full safety foam baffling (Remove foam for alcohol fuel) suggested upgrades include: §§ Light weight aluminum fill plate §§ Fuel pickup assembly, plumbed to right rear of cell §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ Surge tank/Collector §§ Sending unit §§ Fuel pump(s) §§ Lightweight aluminum container §§ 2 year warranty §§ Remote fill options 800-433-6524 www.fuelsafe.com firstname.lastname@example.org An ideal upgrade is the Surge tank/ Collector See page 22 Optional FPHP high pressure pump See page 26 fuel safe racing products 8 enduro cell® | core cell THE ENDURO CELL® The Enduro Cell® Racing Fuel Cell offers full FIA-FT3 approval at an affordable price. The Enduro Cell® is a favorite with off road racers and circle track teams. Enduro bladders are built from high strength molded “hard rubber”. Designed for use with all hydrocarbon fuels, E85 blends, and alcohol, the Enduro line of fuel cells from Fuel Safe delivers excellent performance at a great price. Enduro racing cells come fully assembled and include the following components: §§ FIA-FT3 certified molded bladder §§ Powder coated 20 gauge steel container with external mounting flange §§ Full safety foam baffling (Remove foam for alcohol fuel) §§ SF6X10E fill plate with -8 fittings with threaded billet aluminum fill cap (pg. 23) §§ Fuel pickup assembly, plumbed to right rear of cell §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ 2 year warranty suggested upgrades include: §§ Surge tank/Collector §§ Fuel pump(s) §§ Lightweight aluminum container §§ Lightweight aluminum fill plate Optional 0-90 ohm sending unit See page 29 §§ Remote fill options Enduro Cell® Racing Cell Part No. ED115 Now available with SFI Certification! Complete Enduro Cell® Fuel Cells Part # Capacity EDDC105 (no can) 5 gal/18.9 L. 9.0" Length 10.000" Width 18.0" Height ED105 (4x6 plate, -6 ftgs) 5 gal/18.9 L. 13.625" 13.625" 8.375" ED108 8 gal/30.3 L. 20.750" 16.00" 7.750" ED112 12 gal/45.4 L.. 20.750" 17.875" 9.500" ED115 15 gal/56.8 L. 26.00" 17.875" 9.500" ED122A 22 gal/83.3 L. 34.00" 18.000" 9.500" ED122B 22 gal/83.3 L. 25.500" 17.125" 13.750" ED125 25 gal/94.6 L. 26.250" 17.875" 14.500" ED130 (Aluminum Can) 30 gal/113.6 L. Drop Sump Design - Page 17 ED132A 32 gal/121.1 L. 34.500" 17.875" 14.625" ED132B 32 gal/121.1 L. 26.250" 17.750" 18.500" L x W x H are can dimensions and do not include 1" container flange. Capacities are approximate. Verify size before ordering. See the parts pages for a complete listing of all available accessories. Core Cell - No Container (Dimensions are bladder dimensions.) CORE CELL Fuel Safe’s Core Cell is the same as the Enduro Cell® and comes fully assembled, but without a container. Absolutely the best value in an FIA-FT3 certified cell! Part # Capacity EED105 (4x6 plate, -6 ftgs) 5 gal/18.9 L. Length 13.125" Width 13.125" Height 8.125" EED108 8 gal/30.3 L. 20.125" 15.500" 7.500" EED112 12 gal/45.4 L. 20.188" 17.313" 9.188" EED115 15 gal/56.8 L. 25.188" 17.313" 9.188" EED122A 22 gal/83.3 L. 33.625" 17.500" 9.063" EED122B 22 gal/83.3 L. 24.750" 16.625" 13.313" EED125 25 gal/94.6 L. 25.500" 17.313" 14.000" EED132A 32 gal/121.1 L. 33.500" 17.313" 14.125" EED132B 32 gal/121.1 L. 25.500" 17.250" 18.000" Capacities are approximate. Verify size before ordering. Core Cell Racing Cell Part No. EED115 fuel safe racing products 800-433-6524 www.fuelsafe.com email@example.com race safe racing cells® 9 RACE SAFE RACING CELLS® The Race Safe Racing Cell® offers top shelf safety at a bargain basement price. Built to the same specifications as our Enduro line, but lacking an FIA certification, the Race Safe line of fuel cells offers maximum value for performance and safety. You can’t go wrong with a Race Safe. All Race Safe Racing Cells® come fully assembled and include the following components: Race Safe Racing Cell® with container §§ Highly durable Race Safe molded bladder §§ Full safety foam baffling (Remove foam for alcohol fuel) Part No. RS215 §§ SF6X10E fill plate with -8 fittings with threaded billet aluminum fill cap (pg. 23) §§ Fuel pickup assembly, plumbed to right rear of cell §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ 2 year warranty §§ Available with 20 gauge steel container, powder coated with external mounting flange suggested upgrades include: Race Safe Racing Cells (includes steel container) ® Part No. Capacity Length Width Height RS205 (4x6 plate, -6 ftgs) RS208 RS212 RS215 RS222A RS222B RS225 RS232A RS232B 5 gal/18.9 L. 8 gal/30.3 L. 12 gal/45.4 L. 15 gal/56.8 L. 22 gal/83.3 L. 22 gal/83.3 L. 25 gal/94.6 L. 32 gal/ 121 L. 32 gal/121 L. 13.625" 20.750" 20.750" 26.000" 34.000" 25.500" 26.250" 34.500" 26.250" 13.625" 16.000" 17.875" 17.875" 18.000" 17.125" 17.875" 17.875" 17.750" 8.375" 7.750" 9.500" 9.500" 9.500" 13.750" 14.500" 14.625" 18.500" LxWxH are can dimensions and do not include 1" container flange. Capacities are approximate. Verify size before ordering. §§ Surge tank/Collector §§ Sending unit §§ Fuel pump(s) §§ Lightweight aluminum container §§ Lightweight aluminum fill plate §§ Remote fill options Optional Dipstick See page 29 See the parts pages for a complete listing of all available accessories. Race Safe - No Container (Dimensions are bladder dims) Race Safe Racing Cell® no container Part No. RS115 800-433-6524 www.fuelsafe.com firstname.lastname@example.org Part No. Capacity Length Width Height RS105 (4x6 plate, -6 ftgs) RS108 RS112 RS115 RS122A RS122B RS125 RS132A RS132B 5 gal/18.9 L. 8 gal/30.3 L. 12 gal/45.4 L. 15 gal/56.8 L. 22 gal/83.3 L. 22 gal/83.3 L. 25 gal/94.6 L. 32 gal/ 121 L. 32 gal/121 L. 13.125" 20.125" 20.188" 25.188" 33.625" 24.750" 25.500" 33.500" 25.500" 13.125" 15.500" 17.313" 17.313" 17.500" 16.625" 17.313" 17.313" 17.250" 8.125" 7.500" 9.188" 9.188" 9.063" 13.313" 14.000" 14.125" 18.000" Capacities are approximate. Verify size before ordering. fuel safe racing products 10 sprint | midget | micro SPRINT, MIDGET AND MICRO CELLS These cells are engineered to deliver championship performance at a competitive price. The Ultra II Cell® Dual Fuel bladder is constructed with our proprietary light weight, yet ultra high strength coated fabric (FIA-FT3 certified). The Ultra II is the first (and only) alcohol and gasoline compatible sprint bladder – and the lightest weight on the market! All Fuel Safe sprint cells are delivered race ready with the following components: §§ Premium quality, Ultra II Dual Fuel sprint bladder Ultra II Outlaw® 33 Fuel Cell §§ High strength molded tail tank (shell) Part No. SB333DT §§ -12 Fuel pickup assembly Part No. SFP240-C-10AFG with carbon fiber fill plate options §§ Wear guard assembly/ largest access opening on the market (7" x 12") §§ 2 year warranty Upgrade your sprint cell with a built-in collector (add –C to part number), baffle, (add –B to part number), or high performance sprint fill plate. The high performance fill plate (SFP240-10AFG) comes with a larger vent, vent filter assembly and carbon fiber shield. Vent Cap w/Filter Air filter conversion kit for -10 in tank check valve assembly Part No. ITVV10AFK Complete Part No. DC105MSS MB207DT MB216DT MB219DT MB225DT MB227DT SB225DT SB227DT SB228DT SB230DT SB231DT SB233DT SB333DT SB235DT Replacement Bladder Part No. MB107DT MB116DT MB119DT MB125DT MB127DT MB131DT SB125DT SB127DT SB128DT SB130DT SB131DT SB133DT SB433DT SB135DT Air Filter Conversion -10 in tank check valve assembly, with air filter and internal spring Part No. ITVV10AFC Replacement Approx. Tail Tank Part Capacity No. (Gal.) 5 MT116 7 MT116 16 MT119 19 MT125 25 MT127 27 31 ST125 25 ST127 27 ST128 28 ST130 30 ST131 31 ST133 33 ST333 33 ST135 35 In-Tank Fuel Filter In tank fuel screen #12 with 90° hose barb Part No. FS120ANK Replacement Bladder High Flow Vent Valve -10 in tank check valve with low profile cap and internal spring Part No. ITVV10LP-S Cover Plate with Wear Guard 6X10 treated aluminum plate Part No. CP6X10 7x12 treated aluminum plate Part No. CP7x12 New Fuel Dipstick! See page 29 Description Mini Sprint Econo* Safe 7 Mini/Micro* Mini/Micro Sprint* Midget Midget Midget Pavement Midget Outlaw® Sprint* Sprint Outlaw® Sprint* The Dominator* Sprint Sprint* Outlaw® 33* Pavement Sprint Cell* *Includes molded mounts. T stands for Top Outlet. Substitute B for Bottom Ring. Add -C for Collector or -B for Baffle. Add -FK for Filter Kit. (E.g., SB228DT-C-FK) fuel safe racing products Sprint fill plate with billet aluminum flush cap and low profile -6 rollover vent valve Part No. SFP240-10AFG “ I use Fuel Safe racing cells exclusively, I rely on the best products available to get me to the checkered flag first, that is why I choose Fuel Safe” — Sammy Swindell , 3 Time WoO Sprint Car Champion 800-433-6524 www.fuelsafe.com email@example.com off road fuel cells STANDARD OFF ROAD CELLS (OR) §§ Super tough FIA-FT3 approved Pro Cell® or Enduro bladder Fuel Safe offers factory designed Pro Cell® and Enduro Cell® off road systems that give you all the performance and safety of a custom cell without the custom prices. Standard sizes range from 20 – 70 gallons, and are compatible with gasoline, diesel and Ethanol blends. Fuel Safe’s off road cells offer maximum performance and durability. All Fuel Safe off road cells come standard with the following components: §§ Hand fabricated TIG welded aluminum container §§ Full safety foam baffling §§ Standard 3” fill and 1” vent for lightning quick refills §§ -8 (Truck), and -6 dual (Buggy) pickup assembly §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ 2 year warranty suggested upgrades include: §§ Surge tank/Collector §§ Fuel pump(s) §§ Sending unit §§ Dry break Buggy Cell with standard dual -6 pickups Truck Cell Part No. OR140BP Part No. OR140TP Buggy Fuel Cells Truck Fuel Cells Approx. Capacity A-Length B-Width C-Rear Height D-Front Height OR125TP Pro Cell® 25 gal/95 L 25” 25” 8” 14” 16” OR135TP Pro Cell ® 35 gal/132 L 25” 25” 12” 18” 16” OR140TP Pro Cell® 40 gal/151 L 25” 25” 14” 20” 17” OR140TE Enduro Cell 40 gal/151 L 28.79” 25.25” 11.99” 19.94” 18” OR150TE Enduro Cell® 50 gal/189 L 31.36” 27.10” 11.51” 18.93” OR150TP Pro Cell Part No. Approx. Capacity Length Top Bottom Width Width Height Part No. OR120BP Pro Cell® 20 gal/76 L 30” 8” 15” OR125BP Pro Cell® 25 gal/95 L OR125BE Enduro Cell ® OR135BP Pro Cell® OR140BP Pro Cell ® 11 25 gal/95 L 35 gal/132 L 40 gal/151 L 35” 35” 38” 42” 8” 8” 10” 10” 16” 16” 16” 18” 18” ® ® 50 gal/189 L 30” 34” 10” 16” OR160TP Pro Cell® 60 gal/227 L 30” 34” 14” 18” OR170TP Pro Cell 70 gal/265 L 30” 34” 16” 22” ® See the parts pages for a complete listing of all available accessories. UTV Fuel Cells Part No. Approx. Capacity Length Width DP-10-P 10 gal/38 L 24” 15” Pro Cell® DP-12-E 12 gal/45 L 20.75” 17.87” Enduro Cell® Tough Cell Part No. DP-12-E Height 8” 9.5” Can dimensions do not include bottom flange. UTV FUEL CELLS Fuel Safe has many options for the serious UTV / Side by Side racer. The Tough Cell® was specifically designed for the Polaris RZR but will work with any vehicle. Fuel Safe’s Tough Cell® features a rugged FIA-FT3 approved Pro Cell® or Enduro bladder. Tough Cells® come with race quality hardware in a polished aluminum diamond plate container featuring a bottom mounting flange. We also offer many standard sizes from 5-32 gallons that are inexpensive, off- the-shelf solutions. 800-433-6524 www.fuelsafe.com firstname.lastname@example.org If you require something unique, customs are our specialty! Call one of our sales engineers today to discuss your project. fuel safe racing products 12 porsche cells PORSCHE RACING FUEL CELLS Fuel Safe has drop-in solutions for all types of Porsches. Specially designed collectors are included in many of the cells to ensure consistent fuel delivery. FIA-FT3 approved Pro Cell® bladder, full safety foam baffling and a 2 year manufacturer warranty. Porsche 997 GT3R Porsche 911/964 Porsche 911/993 Porsche 911/964 - with collector, low level sender, flush fill, and provision for a double dry break. 27 gallons - Part No. SA103 32 gallons - Part No. SA104 (pictured) Porsche 911/997 - 27 gallons, with double dry break, collector/reserve tank with 4 scavenge pumps, 2 Bosch 044 supply pumps and a low level float switch. Part No. SA997 Porsche 996 GT3R Porsche 911/993 - 27 gallons, custom fill plate with 100 mm double dry break, collector & reserve tanks, dual scavenge pumps, low level light and external pump mounts. Part No. SA117 Porsche 356 A/B Porsche 911/930 Porsche 356 T5 chassis - 12 gallons, SF6X10A fill plate with -6 vent, a sender provision, -6 pickup. Part No. SA105 Porsche 911/996 - 27 gallons, with100 mm double dry break, collector/reserve tank with 2 scavenge pumps and low level sender. Part No. SA118 Porsche 914 Porsche 911/930 - with collector & SF6X10P fillplate. Includes fiberglass pan and 76-6 sender. 17 gallons - Part No. SA100 (pictured) Remote Fill - Part No. SA100-R With dry break provision - Part No. SA100P 27 gallons - Part No. SA101 Remote fill - Part No. SA101-R With dry break provision - Part No. SA101P Porsche 911/964/993 Porsche 356 A/B Porsche 356 T5 chassis - 20 gallons, with SF6X10A fill plate with -6 vent, sender provision, -6 pickup. Part No. SA106 Porsche 356 B/C Porsche 914 - 10 gallons, designed to utilize OEM fill, sending unit and can. Comes with -8 vent, -8 pickup and -6 return in stock location. Part No. SA914 fuel safe racing products Porsche 911/964/993 17 gallons, with threaded bung for factory sending unit. Part No. SA102 800-433-6524 Porsche 356 T6 chassis - 10 gallons with custom fill plate, sending unit optional. Customer must provide factory tank. Part No. SA115 www.fuelsafe.com email@example.com porsche accessories DUAL DRY BREAK ADAPTER SENDING UNIT 6X10 double dry break adapter without dry break, 2.25" for 100mm centers. Requires modification and welding. (Adapter pictured with dry break installed) Part No. DDBA225 Double dry break, 100mm, tank mount (no bulb), goes inside adapter Part No. DDBF225T-100 13 GASKET KITS For Porsche 996 GT3R Gasket kit for SA118 Part No. GK118 Electronic Fuel Level Sending Unit for Porsche VDO Gauge. 8" - Part No. SU08-V 76-6 11" - Part No. SU11-V 76-6 15" - Part No. SU15-V 76-6 For Porsche 997 GT3R Gasket kit for SA997 Part No. GK997 PORSCHE FILL PLATES ALUMINUM ALUMINUM If you don’t need a dry break system for your 996/997 Fuel Safe fuel cell, this fill plate will replace the dual dry break system with a new plate, flange mount, -6 90° vent check valve and flush cap, gaskets and bolt kits. Part No. SFF99 4 pump system, 4 pairs color coded, 16 gauge leads at 12" length, with cup ring and 90° shrink boot (outside tank connects to vehicle wiring) for 996 Part No. WH08F8 Male wire harness bulkhead Hermetically sealed, 4 pump system, 4 pairs color coded, 16 gauge leads at 36" length, (mount in plate) for 996 Part No. WH08M8 Male wire harness Female adapter 6 pump system with sensor, external side leads, 7 pairs color coded (outside tank connects to vehicle wiring) for 997 Part No. WH16F14 6 pump system with sensor, hermetically sealed, 7 pairs color coded (mount in plate) for 997 Part No. WH16M14 800-433-6524 www.fuelsafe.com 6X10 Remote fill plate for SA100 and SA101 Part No. RFP6X10 6X10 standard fill plate for SA100 and SA101 Part No. SF6X10P WIRING HARNESSES FOR PORSCHES Female wire harness ALUMINUM firstname.lastname@example.org Porsche Fuel Cells & Bladders - Pro Cell® SA100 SA100-R SA101 SA101-R SA102 Replacement Bladder Part No. RBSA100 RBSA100 RBSA101 RBSA101 RBSA102 Approx. Capacity 17 gal/64 L 17 gal/64 L 27 gal/102 L 27 gal/102 L 17 gal/64 L SA103 RBSA103 27 gal/102 L SA104 RBSA104 32 gal/121 L SA105 SA106 RBSA105 RBSA106 12 gal/45 L 20 gal/76 L SA115 RBSA115 10 gal/38 L SA117 SA118 SA126 RBSA117 RBSA118 RBSA126 27 gal/102 L 27 gal/102 L 19 gal/72 L SA914 RBSA914 10 gal/38 L SA997 RBSA997 27 gal/102 L Part No. Description 911/930 911/930 with Remote Fill 911/930 911/930 with Remote Fill 911/964 911/964 with dry break provision 911/964 with dry break provision 356 A/B 356 A/B 356 B/C (CompleteRequires customer tank) 911/993 996 GT3R with double dry break Cayman 914 (Complete Requires customer tank) 997 GT3R with double dry break, scavenge pumps, supply pumps, collector, reserve tank We recommend that you send in your can to ensure a proper fit. fuel safe racing products 14 early model mustang cells Early Mustang Pro Cell® with remote fill plate Part No. SA111A-R Early Mustang Sportsman® Cell with standard style fill plate. Pictured with optional sending unit Part No. SA112B EARLY MODEL MUSTANG RACING FUEL CELLS Enhance the safety and performance of your classic mustang by adding a Fuel Safe Racing Cell. Early model Mustang cells (1964½ - 1970) are available in 16 and 22 gallon sizes with two bladder options: The Pro Cell® bladder is extremely durable and is the best bladder for E-85 fuel, while the Sportsman® has the lightest weight. Both bladders are for use with all hydrocarbon fuels and are FIA-FT3 certified. These fuel cells come fully assembled with the following components: §§ FIA-FT3 certified Pro Cell® or Sportsman® bladder §§ -8 Fuel outlet (in factory location) §§ Tig welded aluminum container §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ Full safety foam baffling §§ 2 year warranty suggested upgrades include: §§ Surge tank/Collector §§ Sending unit §§ Fuel pump(s) §§ SF6X10A fill plate with -8 vent, provision for -8 return with threaded billet aluminum fill cap. §§ Remote fill options §§ Black powder coating See the parts pages for a complete listing of all available accessories. REPLACEMENT BLADDERS Early Mustang Complete Fuel Cells Pro Cell bladder. Part No. Complete Cells SA111A Pro Cell®, 16 gal SA111B Pro Cell®, 22 gal SA112A Sportsman®, 16 gal SA112B Sportsman®, 22 gal SA111A-R Pro Cell®,16 gal, remote fill SA111B-R Pro Cell®, 22 gal, remote fill SA112A-R Sportsman® Cell, 16 gal, remote fill SA112B-R Sportsman® Cell, 22 gal, remote fill ® Includes replacement parts Part No. RBSA111B Sportsman bladder. Early Mustang Remote Style Fill Plate ALUMINUM 2¼ Remote fill plate with -8 vent check valve for stock refueling locations (for early Mustang -64½ to '70) Part No. RFM6X10 Early Mustang Remote Fill Kit ® Includes replacement parts Part No. RBSA112B fuel safe racing products Early Mustang Replacement Bladders Part No. For RBSA111A Pro Cell®, 16 gal, SA111A/A-R RBSA111B Pro Cell®, 22 gal, SA111B/B-R RBSA112A Sportsman®, 16 gal, SA112A/A-R Depending on car, RFK's may require modification RBSA112B Sportsman®, 22 gal, SA112B/B-R For 1965-66 models Part No. RFK6566 For 1967-68 models Part No. RFK6768 800-433-6524 www.fuelsafe.com For 1969 models Part No. RFK69 For 1970 models Part No. RFK70 email@example.com late model mustang 15 (Powder coat optional on both) SA110B Independent Rear Suspension SA110A Solid Rear Axle (1984-1998) (2000-2003) LATE MODEL MUSTANG RACING FUEL CELLS Fuel Safe’s late model racing cells are available for the model years 1984 through 2003, and accommodate both solid axle and independent rear suspension setups. Features our FIA-FT3 approved Pro Cell® bladder and mounting straps specific to the vehicle model year, so be sure to specify the year of the car. These fuel cells come fully assembled with the following components: Late Model Mustang Complete Fuel Cells §§ FIA-FT3 certified Pro Cell® bladder §§ Aircraft grade aluminum (not plastic) nut-ring, and all assembly hardware §§ Tig welded aluminum container Part No Complete Cells SA110A Cobra R, 22 gal, Fits solid rear axle SA110B 2000 Cobra R, 20 gal, Fits factory IRS §§ 2 year warranty §§ Full safety foam baffling §§ Custom fill plates designed to accommodate factory hookups and utilize stock components; e.g. sending unit, vent, pump suggested upgrades include: §§ Remote fill options §§ Black powder coating REPLACEMENT BLADDERS Pro Cell® bladder Pro Cell® bladder Includes foam, gasket and nut-rings (not shown) Part No. RBSA110A Includes foam, gasket and nut-rings (not shown) Part No. RBSA110B Mustang Replacement Bladders Part No. For RBSA110A* Pro Cell®, SA110A RBSA110B* Pro Cell®, SA110B * We recommend you send in your container to have the bladder professionally installed as holes are match drilled. No extra charge for this service. GASKET KITS Rollover Vent (SA110A) For SA110A Part No. GK110A IMSA Filler (SA110A) External Fuel Pump Kits (SA110A) For SA110B Part No. GK110B Required with FV1200 Part No. ITVV06LMK Remote 2" Fill Valve -8 AN pickup Part No. FP181LMK -10 AN pickup Part No. FP182LMK Part No. FV1200 800-433-6524 www.fuelsafe.com firstname.lastname@example.org fuel safe racing products 16 nascar® series NASCAR® APPROVED FUEL CELLS (SPRINT CUP, NATIONWIDE, CAMPING WORLD TRUCK SERIES) Fuel Safe’s NASCOT Fuel Cells offer the lightest weight and highest capacity available. 100% built in the USA by our team of dedicated craftsmen these cells consistently fuel NASCAR’s top teams. NASCOT cells are fully NASCAR approved and carry SFI 32.1 certification. Fuel delivery is exceptional owing to our unique EFI fill plate design. Combined with the fill plate our collector systems scavenge every last drop of fuel. Whether you race in Sprint Cup, Nationwide or Camping World, your team will see huge benefits in selecting the proven winners at Fuel Safe. All Fuel Safe NASCAR® cup series fuel cells include the following components: standard components §§ SFI 32.1 Approved 18 gallon bladder with billet Nut-ring optional components §§ Custom collectors and pump mounts §§ 18 gauge steel container (33” x 17” x 8”) §§ SFI 32.2 Approved billet aluminum fill plates §§ Black large pore safety foam baffling NASCAR® EFI fill plate §§ 2 year warranty NASCAR® Fuel Cell Part No. NASCOT-5 Part No. NAS-5GP NASCAR® Standard fill plate Part No. NASCOT-5P2 NASCAR® CUP SERIES 18-Gallon Replacement Bladder Part No. NASCOT-5B ASPHALT AND MODIFIED SERIES Complete Part No. Replacement Bladder Part No. Description NASCOT-5 NASCOT-5B NASCAR® SFI Complete cell, no collector NASCOT-5-2 NASCOT-5B2 NASCAR® SFI Complete cell, 1-door corner collector NASCOT-5-3 NASCOT-5B3 NASCAR® SFI Complete cell, 2-door corner box collector NASCOT-5-4 NASCOT-5B4 NASCAR® SFI Complete cell, 3-door Road Race center collector NASCOT-5-5 NASCOT-5B5 NASCAR® SFI Complete cell, 2-door Wedge style corner collector NASCOT-5C NASCAR® 18 Gauge Steel Container NASCOT-5P2 NASCAR® SFI Fill Plate, Ultralight w/billet high flow fill valve NAS-5GP “NEW” NASCAR® EFI SFI 32.2 Fill Plate NASCOT-5F Large Pore Black Foam Block for NASCOT Series bladders NASCAR® MODIFIED, PRO SERIES, ALL AMERICAN SERIES, ARCA COMPLETE FUEL CELLS: 22-Gallon Includes a 22-galllon steel container, bladder, full foam baffling and hardware. PC models feature a Pro Cell Plus bladder for superior durability. The Xtreme Cell® meets FIA-FT3.5 and comes with billet aluminum nut-ring, offering the maximum capacity and lightest weight bladder available. ASPHALT SERIES (ARCA, PRO-CUP, TOURING SERIES) The Asphalt Series hardware includes fill plate with 1 ¼” I.D. vent, steel ball valves and 2 1/8” I.D. filler, -8 or -10 low profile pickup. NASCAR® MODIFIED FUEL CELLS The Pavement Modified cell hardware includes fill plate with 2- ¼” O.D. remote fill valve, a 1 ¼” vent check valve, -8 or -10 corner pickup. fuel safe racing products Part No. PC122E1 Part No. PC124-QF PC122E1 XC124 XC122E-1 XC122E-2 XC122E-3 XC122E-4 Description / Can Dimensions Pro Cell Plus Complete Cell, Whelen Modified, w/ quick fill (25” x 16.75” x 13.625”) Pro Cell Plus Complete, w/RF250C, Billet Pickup, End load can (33.625” x 17” x 9.25”) Xtreme Cell®, Complete, Whelen Modified (25” x 16.75” x 13.625”) Xtreme Cell®, Complete, w/RF250C, Billet pickup, No collector (33” x 17” x 9.25”) Xtreme Cell®, Complete, w/RF250C, 1-door corner collector (33” x 17” x 9.25”) Xtreme Cell®, Complete, w/RF250C, 2-door box corner collector (33” x 17” x 9.25”) Xtreme Cell®, Complete, w/RF250C, 3-door center box, dir. Fins (33” x 17” x 9.25”) 800-433-6524 www.fuelsafe.com email@example.com dirt series 17 LATE MODEL / MODIFIED Fuel Safe’s NEW dirt late model/dirt modified fuel cell is engineered to win! Designed in conjunction with Victory Circle Chassis and Billy Moyer Racing, it provides racers with the ultimate combination of safety, performance and affordability. This 28 gallon cell features: §§ Bladder options: ED128DLM Enduro molded bladder ¨¨ FF128DLM Flex Fuel light weight flexible bladder ¨¨ §§ 20 gauge steel container with black powder coated finish (23.5" x 20" x 20") Part No. ED128DLM §§ Lightweight aluminum fill plate with billet flush fill cap -6 vent, -8 return suggested upgrades include: §§ Light weight aluminum can §§ FL06 Dipstick §§ Safety foam baffling §§ Lightweight rigid -10 pickup with side outlet Available with FIA-FT3 AND SFI CERTFICATION §§ Steel mounting straps §§ Aircraft grade nut-ring and assembly hardware §§ 2 year warranty “ Fuel Safe’s new DLM cell provides the HIGHEST LEVEL OF QUALITY AND SAFETY that I’ve seen in a fuel cell. Plus, I feel like their lightweight cell gives us an advantage.” — Billy Moyer – 6 time World 100 Winner DIRT SERIES COMPLETE FUEL CELLS Plate Part No. SF6X10E-LM All of our remaining Dirt Series fuel cells listed below (-LM) come fully assembled and include the following components: §§ Bladder options: ¨¨ ED series includes Enduro molded bladder - OR ¨¨ FF series includes our new Flex Fuel light weight flexible bladder; the first alcohol and gasoline compatible bladder. §§ 20 gauge steel container with black powder coated finish, external mounting flange §§ 6 X 10 powder coated fill plate with -10 outlet (with rigid fuel pickup), -8 vent, -8 return, 2 ½” screw-on fill cap §§ Aircraft grade nut-ring and assembly hardware §§ Factory installed fuel pickup assembly with rigid tubing §§ FL08 Dipstick §§ 2 year warranty suggested upgrades include: §§ Lightweight aluminum can §§ Safety foam baffling Available with FIA-FT3 AND SFI CERTFICATION 800-433-6524 firstname.lastname@example.org www.fuelsafe.com Lightweight rigid pickup DIRT SERIES COMPLETE FUEL CELLS FIA-FT3 APPROVED Part No. ED115-LM ED122B-LM ED125-LM ED132B-LM ED130* Approx. Capacity 15 gal. 22 gal. 25 gal. 32 gal. 30 gal. Part No. ED115-LM Length X Width X Height Description 17.87” X 26.00” X 9.50” 17.12” X 25.50” X 13.75” 17.87” X 26.25” X 14.50” 17.75” X 26.25” X 18.50” 22.60” X 24.50” X 18.85” Enduro Cell® Enduro Cell® Enduro Cell® Enduro Cell® Enduro Cell® * Substitute FF for ED in the part number to upgrade to a Flex Fuel flexible bladder. * Add -A to part number to upgrade from steel container to light weight aluminum container. (Note: ED130 comes with alum. can.) * Add -FB to part number if you want to add safety foam baffling. fuel safe racing products 18 custom fuel cells FUEL SAFE CUSTOM WORKS® Long known for their superiority in performance and safety, Fuel Safe Racing Cells® can be fabricated in any shape imaginable. Whether you need an OEM fuel tank lined with a racing bladder or a complete fuel cell, Fuel Safe has you covered. From the world famous record holding Thrust Rocket Car to a Formula SAE racer and everything in between, we can fulfill nearly any need. Fuel Safe has materials compatible with any fuel you may want to use, from race gas to alcohol blends. Each Custom Works' component is hand made from your drawing, mockup, or supplied container. Have a shape that contains radiused corners, contours, multiple angles? No problem. Fuel Safe has some of the finest fabricators in the world and can manufacture state-of-the-art containers and hardware that provides the finishing touch to any project. Custom Pro Cell with aluminum can Custom Hydroplane boat bladder Pair of Ultima Kit Car Racing bladders Trick Custom bladder for off road application Custom fuel cell for Mazda MX-5 fuel safe racing products Custom Pro Cell with dual remote fills 800-433-6524 Custom UTV racing cell www.fuelsafe.com email@example.com specialty fuel cells / vintage / formula 19 FUEL SAFE SPECIALTY APPLICATIONS (SA) 42 Gallon Shelby Cobra Racing Cell Formula Mazda Pro Cell Fuel Safe's specialty applications division has developed a wide variety of drop-in solutions for many types of factory race platforms including vintage Lotus, Corvette and Camaro designs to our highly specialized C6 fuel cells found on the Pratt and Miller factory Corvettes. We offer a variety of application specific fill plates and collector systems depending on the model you choose. All specialty cells include an FIA-FT3 approved Pro Cell® bladder, full safety foam baffling, and a two-year manufacturer warranty. Pratt and Miller Corvette Racing Cells SA113 - 7 gallon lotus racing cell SA123 - COBRA FORMULA ROAD RACING BLADDERS Designed around our most common wedge cell configuration, Fuel Safe's formula wedge cells offer a cost effective racing fuel cell for your vintage race cars including Van Diemens, BT29's, Formula Fords and Formula Vee's. All formula wedge bladders come with an FIA-FT3 approved bladder, full safety foam baffling and two year manufacturer warranty. For wedge cell drawings visit the formula/vintage section of our online store. 6-gallon Pro Cell® 1.5" fill neck , -6 pickup, -6 vent, threaded alum. fill cap Part No. CB300 5-gallon Pro Cell® 1.5" fill neck, -6 pickup, -6 vent, threaded alum. fill cap Part No. CB301 6-gallon Pro Cell® 1.25" fill nipple, 3" tall Part No. CB302 6-gallon Pro Cell® 1.5" fill neck, -6 pickup, -6 vent, threaded aluminum fill cap Part No. CB303 CB303-A with optional aluminum container Aluminum containers are available for ALL formula wedge cells in this section. Just add "-A" to the part number to indicate you would like an aluminum container. 6-gallon Pro Cell® 1.5" fill neck, -6 pickup, -6 vent, threaded aluminum fill cap Part No. CB304 800-433-6524 4-gallon Enduro Cell® 1.5" fill neck, -6 pickup, -6 vent, threaded fill cap Part No. CB400 www.fuelsafe.com firstname.lastname@example.org 6-gallon Enduro Cell® 1.5" fill neck, -6 pickup, -6 vent, threaded alum. fill cap Part No. CB401 fuel safe racing products 20 replacement bladders PRO CELL SPORTSMAN Replacement Bladders - FIA-FT3 Certified FIA-FT3 Certified/ Available with SFI Certification (Comes with foam, nutring, gasket and pickup.) Approx. Capacity PRO CELL SPORTSMAN FLEX FUEL Part No. Part No. Part No. To Fit 5 gal/19 L RB105 RB205 FF505 PC/SM/FF105 8 gal/30 L RB108A RB208A FF508A PC/SM/FF108A 8 gal/30 L RB108B RB208B FF508B PC/SM/FF108B 10 gal/38 L RB110 RB210 FF510 PC/SM/FF110 12 gal/45 L RB112 RB212 FF512 PC/SM/FF112 15 gal/56 L RB115 RB215 FF515 PC/SM/FF115 15 gal/56 L RB115-06 RB215-06 FF515-06 PC/SM/FF115-06 17 gal/64 L RB117 RB217 FF517 PC/SM/FF117 18 gal/68 L RB118A RB218A FF518A PC/SM/FF118A 18 gal/68 L RB118B RB218B FF518B PC/SM/FF118B & C 22 gal/83 L RB122A RB222A FF522A PC/SM/FF122A 22 gal/83 L RB122B RB222B FF522B PC/SM/FF122B 22 gal/83 L RB122C RB222C FF522C PC/SM/FF122C 22 gal/83 L ENDURO FLEX FUEL RB222E FF522E SM/FF122E-QF 22 gal/83 L RB124 RB224 FF524 SM/FF124 26 gal/98 L RB126 RB226 FF526 PC/SM/FF126 29 gal/109 L RB129 RB229 FF529 PC/SM/FF129 32 gal/121 L RB132A RB232A FF532A PC/SM/FF132A 32 gal/121 L RB132B RB232B FF532B PC/SM/FF132B 44 gal/166 L RB144 RB244 FF544 PC/SM/FF144 (Comes with foam, nutring, gasket and pickup.) Part No. Capacity To Fit RB305 5 gal ED105 RB308 8 gal ED108 RB312 12 gal ED112 RB315 15 gal ED115 RB322A 22 gal ED122A RB322B 22 gal ED122B RB325 25 gal ED125 RB332A 32 gal ED132A RB332B 32 gal ED132B Capacities are approximate. Verify can size before ordering. Only stock sizes available with Enduro bladders. OVAL SERIES REPLACEMENT BLADDERS Part No. RB122E Off Road Buggy and Truck Replacement Bladders - FIA-FT3 Certified (Comes with foam, nutring, gasket and pickup.) Fits Buggy Part No. Part No. Fits Truck Part No. Part No. OR120BP Pro Cell® RBOR120BP OR125TP Pro Cell® RBOR125TP OR125BP Pro Cell® RBOR125BP OR135TP Pro Cell® RBOR135TP OR125BE Enduro Cell® RBOR125BE OR140TP Pro Cell® RBOR140TP OR135BP Pro Cell® RBOR135BP OR140TE Enduro Cell® RBOR140TE OR140BP Pro Cell® RBOR140BP OR150TE Enduro Cell® RBOR150TE OR150TP Pro Cell® RBOR150TP OR160TP Pro Cell® RBOR160TP OR170TP Pro Cell® RBOR170TP fuel safe racing products 800-433-6524 (Comes with foam, nutring, gasket and pickup.) Part No. Fits RB124 PC124 RB122E PC122E1 RB122E PC122E2 RB024 XC124 RB022E-1 XC122E-1 RB022E-2 XC122E-2 RB022E-3 XC122E-3 RB022E-4 XC122E-4 www.fuelsafe.com email@example.com replacement cans | foam Top External Flange (EF) 21 Bottom Flange (BF) STEEL Replacement Foam Steel Container STEEL CONTAINERSPOWDER COATED REPLACEMENT FOAM Pro Cell (PC)/Sportsman (SM)/ Flex Fuel (FF) Shoebox Lid (SB) Steel Capacity Fits SC105 5 gal PC/SM/ED/RS/EED Part # Capacity Fits SC108A 8 gal PC/SM/ED/RS/EED FB105 5 gal PC/SM/FF SC108B 8 gal PC/SM FB108A 8 gal PC/SM/FF SC110 10 gal PC/SM FB108B 8 gal PC/SM/FF SC112 12 gal PC/SM/ED/RS/EED Part No. Capacity Fits FB110 10 gal PC/SM/FF SC 115 15 gal PC/SM/ED/RS/EED AC105 5 gal PC/SM/ED/RS/EED FB112 12 gal PC/SM/FF SC117 17 gal PC/SM AC108A 8 gal PC/SM/ED/RS/EED FB115 15 gal PC/SM/FF SC118A 18 gal PC/SM AC108B 8 gal PC/SM FB117 17 gal PC/SM/FF SC118B 18 gal PC/SM AC110 10 gal PC/SM FB118A 18 gal PC/SM/FF *SC118C 18 gal PC/SM AC112 12 gal PC/SM/ED/RS/EED FB118B 18 gal PC/SM/FF SC122A 22 gal PC/SM/ED/RS/EED AC 115 15 gal PC/SM/ED/RS/EED FB122A 22 gal PC/SM/FF SC122B 22 gal PC/SM/ED/RS/EED AC117 17 gal PC/SM FB122B 22 gal PC/SM/FF SC122C 22 gal PC/SM AC118A 18 gal PC/SM FB122C 22 gal PC/SM/FF 18 gal PC/SM ALUMINUM CONTAINERS Top or Bottom Flange/Shoebox SC122E 22 gal PC/SM (END LOAD) AC118B FB122E 22 gal PC/SM/FF SC124 24 gal PC/SM AC122A 22 gal PC/SM/ED/RS/EED FB124 24 gal PC/SM/FF SC126 26 gal PC/SM/ED/RS/EED AC122B 22 gal PC/SM/ED/RS/EED FB126 26 gal PC/SM/FF SC129 29 gal PC/SM AC122C 22 gal PC/SM FB129 29 gal PC/SM/FF SC132A 32 gal PC/SM/ED/RS/EED AC126 26 gal PC/SM/ED/RS/EED FB132A 32 gal PC/SM/FF PC/SM/ED/RS/EED AC129 29 gal PC/SM FB132B 32 gal PC/SM/FF AC132A 32 gal PC/SM/ED/RS/EED FB144 44 gal PC/SM/FF AC132B 32 gal PC/SM/ED/RS/EED AC144 44 gal PC/SM SC132B SC144 32 gal 44 gal PC/SM *SC118C has vertical end flange. Add EF for external flange, SB for shoebox lid or BF for bottom flange. STEEL STEEL BOLTED END LOAD CAN Capacity Fits 5 gal ED/RS/EED FB208 8 gal ED/RS/EED FB212 12 gal ED/RS/EED FB215 15 gal ED/RS/EED FB222A 22 gal ED/RS/EED FB222B 22 gal ED/RS/EED FB225 25 gal ED/RS/EED FB232A 32 gal ED/RS/EED FB232B 32 gal ED/RS/EED Part # FB6 FB8 FB12 Part No. SC122E www.fuelsafe.com Part # FB205 YELLOW FOAM BLOCKS For ARCA and other touring series 800-433-6524 Enduro (ED)/Race Safe (RS) firstname.lastname@example.org Capacity 6" x 6" x 6" foam block 8" x 8" foam block 12" x 12" x 12" foam block fuel safe racing products 22 collectors/surge tanks If you will be using more than 80 percent of your fuel capacity before refueling, you will benefit from the use of a collector (surge tank) which collects fuel more efficiently than a large open bottom tank. Whether you are looking to run down to the last ounce of fuel or just want to ensure a solid supply for an EFI set-up, our various collector options can fill your needs. FABRIC FLEXIBLE COLLECTORS Corner Collector w/ (2) Ball Check Valves (Sides 6.5" x Face 9.5" x Height 5.25") Part No. ST200B Center Collector w/ (3) Ball Check Valves (7.5" x 6" x 5") Part No. ST200C Corner Box Collector w/(2) Ball Check Valves (7.5" x 6" x 5") Part No. ST200D Corner Collector Center Collector w/1 Billet Alum. Door (Sides 6.5" x Face 9.5" x Height 5.25") Part No. ST200B-T w/ (3) Ball Check Valves & Directional Fins (7.5" x 6" x 5" excluding fins) Part No. ST200E TRAP DOORS AND CHECK VALVES Center Box Collector w/ 3 Billet Alum. Doors (7.5" x 6" x 5") Part No. ST200C-T Corner Box Collector w/ 2 Billet Alum. Doors (7.5" x 6" x 5") Part No. ST200D-T Center Collector w/ 3 Billet Alum. Doors & Directional Fins (7.5" x 6" x 5" excluding fins) Part No. ST200E-T 1" Ball Check Valve 1½" Trap Door Check Valve Aluminum with O-ring seal & feed ramp, Billet Aluminum Anodized Part No. TD150-OR Part No. CV100 RIGID POLYMER SURGE TANK/COLLECTORS (6" X 6" X 4" ) With 3 Ball Check Valves Part No. ST100 With 3 Ball Check Valves & fitting Specify pickup size: -6, -8, -10 Part No. ST100-6 (or -8 or -10) With 3 Billet Aluminum Doors Part No. ST100-T With 3 Billet Aluminum Doors, Bosch 044 High Pressure Pump, Filter and Wire Harness Part No. ST100-HPB-T With 3 Billet Alum. Doors. Specify pickup size: -6, -8, -10 Part No. ST100A-T fuel safe racing products With 3 Ball Check Valves and Low Pressure Pump, Filter & Wire Harness Part No. ST100-LP 800-433-6524 With 3 trap door Valves, High Pressure Pump, Filter & Wire Harness Part No. ST100-HP-T With 3 Ball Check Valves, Bosch 044 High Pressure Pump, Filter & Wire Harness Part No. ST100-HPB www.fuelsafe.com email@example.com fill plates 23 STANDARD STYLE FILL PLATES ALUMINUM Fuel Safe's standard 6x10 fill plate w/ 2.5" cap w/ rollover protection -8 outlet, -8 vent, -8 return capped off, provision for sender Steel plate - Part No. SF6X10E Aluminum plate - Part No. SF6X10E-A 4x6 fill plate, 2.5" cap w/ rollover protection Part No. SF4X6D NEW! 4x6 fill plate with 2.4” flush fill cap Part No. SFP240B ALUMINUM ALUMINUM STEEL 6x10, 2.5" cap w/ rollover protection, alum. Part No. SF6X10C 6X10, 2.5" cap w/ rollover protection, -8 vent, -8 outlet Part No. SF6X10A 4x6, 2.25" cap w/ rollover protection, -6 vent, -6 outlet Part No. SF4X6B STEEL 4x6, 2.25" cap & neck, w/ rollover protection, -6 vent, -6 outlet Part No. SF4X6C STEEL STEEL 6x10 fill plate, 4" cap, -8 vent, -8 pickup Part No. SF6X10D 6X10, 2.25" cap w/ rollover protection, -8 vent, -8 outlet Part No. SF6X10B STEEL REMOTE STYLE FILL PLATES 4x6 fill plate, 3" rollover valve & 1" vent Part No. RF390B 4x6 fill plate, 2¼" rollover valve & 1" vent check valve Part No. RF4X6B 4x6 fill plate, 3" rollover valve Part No. RF390A 4x6 fill plate, 2.25" rollover valve Part No. RF4X6A ALUMINUM ALUMINUM 6X10 dual 2¼" remote plate w/ fill & vent check valves for dual dry break (pictured) Part No. DR250 ALUMINUM ALUMINUM 6X10 dual remote 2.25" w/ 45° fill valves Part No. DR245A 6X10 dual remote 2.5" w/ 45° fill valves Part No. DR245B 6X10, 45° 3" dual remote plate w/1" vent Part No. DR345 MULTI-LOCATION FILL PLATES ALUMINUM ALUMINUM 6X10, 4-3/4" BC w/ -8 outlet and -8 vent Part No. ML6X10A 6X10 fill plate w/ 45° remote fill, single -8 outlet, single -8 vent w/ rollover protection, extra capped bulkhead, sender provision 2.25" 2.5" 3" remote fill remote fill remote fill Part No. Part No. Part No. ML6X10RF-225 ML6X10RF-250 ML6X10RF-300 800-433-6524 www.fuelsafe.com firstname.lastname@example.org ALUMINUM 6X10 fill plate,1" vent, 4-3/4" BC Part No. ML6X10B (pictured above) 1" vent & steel ball, 4-3/4" BC - Part No. ML6X10BS 1¼" vent valve Part No. ML6X10C 1¾" vent valve Part No. ML6X10D ALUMINUM 6X10, offset filler, -8 outlet, -8 vent, 4-3/4" BC Part No. ML6X10E 6X10, offset filler & sender provision, 4-3/4" BC Part No. ML6X10E-S (pictured above) fuel safe racing products 24 fill valves | bulkhead fittings STANDARD FILL VALVES REMOTE FILL VALVES (LIGHTWEIGHT ALUMINUM) (LIGHTWEIGHT ALUMINUM) FV290B-C (Threaded) 2-1/2" Rollover Valve, 4¾" BC Part No. FV290B-C FV290/FV390 FV290A-C (Bayonet) 2-1/4" Rollover Valve, 4¾" BC Part No. FV290A-C (mounted on multi-location plate) 2-1/4" 90° Rollover Valve (4-3/4" BC) 2-1/2" 90° Rollover Valve (4-3/4" BC) 3" 90° Rollover Valve (4-3/4" BC) 2-1/4" 45° Rollover Valve (4-3/4" BC) 2-1/2" 45° Rollover Valve (4-3/4" BC) 3" Rollover Valve (4-3/4" BC) FFP240 2.4” flush fill cap, 4 ¾” bolt circle flange (for use on ML6X10 fill plates) Part No. FFP240 QF345 FV245 Part No. FV290A Part No. FV290B Part No. FV390 Part No. FV245A Part No. FV245B Part No. QF345 BULKHEAD FITTINGS (LIGHTWEIGHT ALUMINUM) Straight Fittings -4, 1/4" -6, 3/8" -8, 1/2" -10, 5/8" -12, 3/4" BHF00 90° Fittings Part No. BHF00-4 Part No. BHF00-6 Part No. BHF00-8 Part No. BHF00-10 Part No. BHF00-12 -4, 1/4" -6, 3/8" -8, 1/2" -10, 5/8" -12, 3/4" BHF90 Part No. BHF90-4 Part No. BHF90-6 Part No. BHF90-8 Part No. BHF90-10 Part No. BHF90-12 Bulkhead Fitting Washerless Bulkhead Fitting #10 assembly includes 3 nylon washers and one aluminum O-ring washer (Used on Midget Cells) Part No. BHF10K -12 Kit includes bulkhead, spacer and nut (Used on Sprint Cells) Part No. BHF12KN FUEL AND VENT HOOKUP FITTINGS (LIGHTWEIGHT ALUMINUM) AN Straight Hose Barb HFL00 -6, 3/8" -8, 1/2" -10, 5/8" -12, 3/4" Part No. HFL00-6 Part No. HFL00-8 Part No. HFL00-10 Part No. HFL00-12 AN 45° Hose Barb, Lightweight HFL45 -6, 3/8" -8, 1/2" -10, 5/8" -12, 3/4" Part No. HFL45-6 Part No. HFL45-8 Part No. HFL45-10 Part No. HFL45-12 AN 90° Hose Barb, Lightweight HFL90 -6, 3/8" -8, 1/2" -10, 5/8" -12, 3/4" Part No. HFL90-6 Part No. HFL90-8 Part No. HFL90-10 Part No. HFL90-12 ADAPTERS (LIGHTWEIGHT ALUMINUM) AN "Y" fitting AN straight bulkhead fitting Billet aluminum, anodized -8 female to two -6 males Part No. HFL-Y- 8-6 fuel safe racing products Billet aluminum blue anodized, steel washer, nylon washer and nut. -8 female to two -8 males Part No. HFL-Y-8 -6 AN to -8, -8 through plate Part No. BHF00-8-6 -8 AN to -10, -10 through plate Part No. BHF00-10-8 800-433-6524 www.fuelsafe.com email@example.com vent valves | vent filters VENT CHECK VALVES 25 with Rollover Protection In tank vent check valve 90° fitting -6 -8 -10 -4 vent check valve Part No. ITVV06-90 Part No. ITVV08-90 Part No. ITVV10-90 low clearance 90°, 1/4" out vent, Part No. THV45 In tank Rollover Return Valve, High Performance -6, 3/8" -8, 1/2" -10, 5/8" Part No. ITRV06HP Part No. ITRV08HP Part No. ITRV10HP -6 in tank vent check valve In line vent check valve Offers positive shut-off -6, 3/8" Part No. ILVV06 -8, 1/2" Part No. ILVV08 LARGE DIAMETER VENT CHECK VALVES with Rollover Protection. For positive shut-off and faster refueling. Mounts in bladder. 1" Check Valve Part No. ITV100 Part No. ITV100-NF 1-3/4" Check Valve VF38 VF12 VF100 VFM 38 (Male) VFM 12 (Male) High Flow Vent Valve -10 in tank check valve with low profile cap and internal spring Part No. ITVV10LP-S Part No. ITVV06LP-S Part No. ITVV10 VENT VALVES In tank or inline, red anodized aluminum -6 AN 8mm hose barb Part No. TPV6 Part No. TPV8 In Line Vent Valve Rollover Vent Valve with 7 mm hose barb, with rollover protection, red anodized aluminum Part No. TRL7 In hose 3/8" Part No. RV38 Part No. ITV175 AIR VENT / FILTERS 3/8" 1/2" 1" 3/8" 1/2" Part No. ITVV08 with spring for standard fill Part No. ITVV08S -10 in tank vent check valve assembly Pressure Relief Vent Valve 1" Weld-in Check Valve -8 in tank vent check valve Part Number ITVV06 with spring for standard fill Part No. ITVV06S Air Filter Conversion -10 in tank check valve assembly, with air filter and internal spring Part No. ITVV10AFC IN TANK ROLLOVER RETURN VALVES Vent Cap w/Filter Air filter conversion kit for -10 in tank check valve assembly Part No. ITVV10AFK -6 return check valve Part No. ITRV06 -8 return check valve Part No. ITRV08 In-Tank Fuel Filter In tank fuel screen #12 with 90° hose barb Part No. FS120ANK DISCRIMINATOR VALVES (discriminates between gas and air) 1-3/4" external mounted discriminator valve Part No. DV175 800-433-6524 www.fuelsafe.com -8 (1/2") in tank discriminator valve bulkhead/plate mount Part No. ITDV08 firstname.lastname@example.org 1" discriminator valve with -12 fittings, external mount Part No. DV100 In tank discriminator (-10, -12, -16) Must be welded in a plate Part No. ITDV fuel safe racing products 26 pumps | harnesses | pickups BOSCH PUMP & ACCESSORIES Bosch High Output Pump 200 liters per hour (52.5 gph) at 72 psi (5 bar) at 13A, filter optional Part No. FPO44 AEROMOTIVE PUMPS AND ACCESSORIES ARE NOW AVAILABLE! IN TANK FUEL PUMPS & FILTERS FSHP adapter for Bosch pump to FSHP Filter Part No. 1HDW52 Low Pressure Pump (4-6 PSI) 35 gph Part No. FPLP Billet aluminum in-line check valve for Bosch pump. Threads directly onto pump outlet and -8 male AN fitting on outlet side. 2-3 PSI cracking pressure Part No. ILPCV08 3/8" Vertical Part No. FS06 High Pressure Pump (95 PSI) 80 gph Part No. FPHP Comes with filter Part No. FSLP 1/2" Vertical Part No. FS08 3/8" Horizontal Part No. FS38 Billet Ultralight Low Profile Pickup Designed for use where maximum fuel pick-up is required. Allows the fuel line to pick up the last drop of fuel. 3/8" - Part No. CP38 1/2" - Part No. CP12 5/8" - Part No. CP58 Requires mounting stud in bladder. -6 AN - Part No. BPU06 -8 AN - Part No. BPU08 -10 AN - Part No. BPU10 WIRING HARNESSES Female, 4-wire Part No. WH04F4 35 Micron Aluminum with Stainless Element Overall lengths Plastic Low Profile Pickup Male 2-wire, with terminal for 1 FPHP Part No. WH04M2 Female, 5 pin, 4-wire, positive locking Part No. WH05F4 Part No. FF200A Part No. FF200B Part No. FF250A Part No. FF250B Includes 2 ft. hose, swivel hose barb & bulkhead fitting - 6, 3/8" (w/ filter) - 8, 1/2" (w/ filter) Male 4-wire, with terminal for 2 FPHP Part No. WH04M4 4.5" Billet with -6 filter 6" Billet with -8 filter 6" Billet with -6 filter 8" Billet with -8 filter Requires mounting stud in bladder. -6 AN - Part No. LPP06 -8 AN - Part No. LPP08 -10 AN - Part No. LPP010 FUEL PICK-UP KITS All wiring harnesses are 16 gauge. Female, 2-wire Part No. WH04F2 1/2" Horizontal Part No. FS12 IN LINE FILTERS PICKUP ACCESSORIES Corner Pick-up Assembly Comes with filter Part No. FSHP Part No. FP180 Part No. FP181 - 10, 5/8" (no filter) - 12, 3/4" (no filter) Part No. FP182 Part No. FP183 5/8" -10 AN includes 3' hose, grooved washer, O-ring, 3 nylon washers and BHF10K Part No. FP182S 3/4" -12 AN includes 3' hose, hose clamp, grooved washer, O-ring, 3 nylon washers and BHF12K. Part No. FP183SO Male, 5 pin, 4 wire (mount in plate) Part No. WH05M4 3/4" -12 AN includes 3' hose, hose clamp and BHF12KN. Part No. FP183S Male, 4 pin, 2 wire, 24" length, includes install kit Part No. WH04M2-NC fuel safe racing products Male, 4 pin, 4 wire, 24" length, includes install kit Part No. WH04M4-NC 800-433-6524 www.fuelsafe.com email@example.com fill caps NEWTON "MONZA STYLE" FILL CAPS ·· With locking insert ·· Compression style mounting flange 3.7" dia. ·· 2" or 2.25" hose barb adapter on flange ·· Accepts fill nozzles up to 1.25" in dia. Part No. CF300 ·· Internal venting system ·· Flange neck: 3.25" dia. ·· 2.5 BC, 6 bolt ·· 2" hose barb adapter on flange ·· Accepts fill nozzles up to 1.25" in dia. Part No. CF200 ·· Internal venting system ·· Flange neck: 3.7" dia ·· 3" BC, 6 bolt ·· Combination 2" or 2.25" hose barb adapter ·· Locking insert option ·· Accepts fill nozzles up to 1.25" in dia. Part No. CF250 A x B x C dimensions. More information at www.fuelsafe.com/store. Monza Style Chart Part No. A B C CF200 3.2” 2.4” 1.1” CF250 4.0” 3.0” 1.3” CF275 4.6” 3.3” 1.3” CF300 5.2” 3.9” 3.6” FLUSH FILL CAPS 27 ·· Chrome finish ·· Flange neck: 3.7" dia. ·· 3" BC, 6 bolt ·· 2" or 2.25" hose barb adapter on flange ·· Locking insert option ·· Accepts fill nozzles up to 1.25" in dia. Part No. CF275 Locking insert for CF250 & CF275 Part No. Z2L NEWTON FLUSH FILL CAPS 2.4" carbon fiber cap Part No. SFC240-C 1¾" , 6 bolt, 2½" BC Part No. A26S 2.4" aluminum cap Part No. SFC240 3”, 9 bolt, 4” BC Part No. A49S 1¾", 6 bolt, 2½" BC with weld flange Part No. A2NSX 3", 9 bolt, 4" BC, w/ lock Part No. A49L 2", 6 bolt, 3" BC Part No. A36S 3”, 12 bolt, 4.75 BC Part No. A412S 2", 6 bolt, 3" BC, w/ lock Part No. A36L 3", 12 bolt, 4.75 BC, w/ lock Part No. A412L 2”, 6 bolt, 3" BC w/ 2" & 2.25" remote flange Part No. A36NS2 2”, 6 bolt, 3" BC w/ 2" & 2.25" remote flange, w/ lock Part No. A36NL2 STANDARD FILL CAPS STEEL STEEL 2.25" bayonet style, non vented fill cap Part No. FC225 3" bayonet style, non vented fill cap Part No. FC300 ALUMINUM 2.5" threaded non vented fill cap Part No. FC250C 800-433-6524 www.fuelsafe.com ALUMINUM 1.75" threaded non vented fill cap with dipstick provision Part No. FC175 firstname.lastname@example.org STEEL 4" bail cap, bayonet style (fits FN400 & CTF400) Part No. FC400 fuel safe racing products 28 dry breaks | fueling equipment REDHEAD DRY BREAKS DBF125A Female tank mount receiver. Mates w/ DBM125 DBF225B Female tank mount receiver w 4"BC. Mates w/ DBM200R DBF300R Female remote mount receiver w/ polymer bulb 2.5" hose. Mates w/ DBM200R DBF225C Female tank mount receiver w/ 4.75"BC. Mates w/ DBM200R DBF300R-A225 Female receiver w/ alum bulb 2.25" hose. Mates w/ DBM 200R. DDBF225T-100 Female receiver w/ alum bulb 3" hose. Mates w/ DBM200R DDBF225R-4.5 DDBF225T-4.5 Male dry break 2" ID bore for 2.25" hose. Male dry break 1.25" ID bore for 1.5" hose. DDBM225R-100 Two tank mount receivers mounted on 100mm C/L. Mates w/ DDBM 225R-100 Two DBM 200R males mounted on 100mm C/L for 2.25" hose DDBM225R-4.5 Two DBM200R males mounted on 4.5" C/L for 2.25" hose Two tank mount receivers mounted on 4.5" C/L. Mates w/ DDBM 225R-4.5 Two female receivers mounted on 4.5" C/L Alum bulbs 2.25" hose. Mates w/ DDBM 225R-4.5 DBM200R DBM125 Female remote mount receiver, alum bulb 1.5" hose. Mates w/ DBM125 DDBF225R-100 Two female receivers mounted on 100mm C/L Alum bulbs 2.25" hose. Mates w/ DDBM 225R-100 DBF300R-A3 DBF125B DRY BREAK REBUILD KITS 1HDW39 Female 2" receiver 1HDW40 Male 2" probes PP125F Female 1.25" receivers PP125M Male 1.25" probes RUBBER ELBOWS Tough, for use with remote fill plates 45° elbow , 2¼" - Part No. RE45-225 45° elbow, 3" Part No. RE45-3 90° elbow, 2¼" - Part No. RE90-225 90° elbow , 3" Part No. RE90-3 BIG BORE FILLER FN400 4" neck fits 3" hose QUICK FILL DUMP CANS DC011R 11 gallon Red DC011W 11 gallon White REFUELING VENT BOTTLE DC006 5 gallon/20 liter. Can be used for filling or to catch vent overflow. FENDER FILLERS & ADAPTERS RFF225 RFK225 2.25" recessed remote fender filler kit includes RFF225, 2' filler hose, 2' aluminum tubing and hose clamps fuel safe racing products RFK300 3" recessed remote fender filler kit includes RFF300, 2' filler hose, 2' aluminum tubing and hose clamps 2.25" recessed remote fender filler RFF300 3" recessed remote fender filler 800-433-6524 Fender Adapter 9 bolt for 3" AFC300B cap, with hose barb, without nut-ring 2.25" - FA300-225 3" - FA300-300 www.fuelsafe.com email@example.com fire bottles | senders | misc. FIRE SAFE™ FIRE SUPPRESSION SYSTEMS FSK225-A-SL 29 FSK400 ·· 2.25 liter aluminum bottle with charge gauge ·· Steel mounting base, mounting straps ·· 12 & 6 foot pull cable, one each ·· 2 nozzles and 1 tee fitting ·· 12' tubing ·· 2 E stickers Charged to 7 Bar (100 PSI), System weight: 11 lbs. Length 14" Diameter 5" ·· 4 liter steel bottle with charge gauge ·· Steel mounting base, mounting straps ·· 12 & 6 foot pull cable, one each ·· 6 nozzles, 5 tee fittings, 1 bulkhead fitting ·· 15' tubing ·· 2 E stickers Charged to 8 Bar (116 PSI) System weight: 18 lbs. Length 17" Diameter 6" Part No. FSK225-A-SL Part No. FSK400 FSK400 shown CLEAR HOSE VENT/ FILL 1" ID Nylon Reinforced 2" ID Helix Reinforced 2.25” ID, Helix Reinforced 2.25" ID Wire Reinforced 2.5" ID Clear 3" ID Helix Reinforced 3" ID w/ Copper Ground Wire Black, Wire Reinforced, 2.25" ID Part No. CVH100N Part No. CFH200H Part No. CFH225H Part No. CFH225W Part No. CFH250 Part No. CFH300H Part No. CFH300WC Part No. BFH225 PICKUP HOSE -4, 1/4" ID -6, 3/8" ID -8, 1/2" ID -10, 5/8" ID -12, 3/4" ID 5/16" ID Part No. PUH04 Part No. PUH06 Part No. PUH08 Part No. PUH10 Part No. PUH12 Part No. PUH05 ELECTRONIC PARTS BLANK ALUMINUM PLATES Comes with bolt kit and gasket. 12 Bolt Oval - 4" x 6" Part No. 1PLA05 24 Bolt Oval - 6" x 10" Part No. 1PLA13 12 Bolt Circle - 4-3/4" BC Part No. 1PLA14 10 Bolt Circle - 3-1/8" BC Part No. 1PLA16 6 Bolt Circle - 2-7/8" BC Part No. 1PLA18 6 Bolt Circle - 2" BC Part No. 1PLA30 5 Bolt Circle (Sending Unit) Part No. 1PLA34 4 Bolt Circle - 1-5/8" BC Part No. 1PLA62 9 Bolt Circle - 4" BC Part No. 1PLA73 16 Bolt Circle - 6" BC Part No. 1PLA75 (Anodized plates are 2PLA series; i.e. 2PLA05.) GASKETS 10 Bolt Circle - 3-1/8" BC 5 Bolt Circle (Sending Unit) 4 Bolt Circle - 1-5/8" BC 6 Bolt Circle - 2-15/16" BC 6 Bolt Circle - 2" BC 9 Bolt Circle - 4" BC 12 Bolt Circle - 4-3/4" BC 12 Bolt Circle - 5-3/8" BC 24 Bolt Oval - 6" x 10" 12 Bolt Oval - 4" x 6" Part No. 1GAS07 Part No. 1GAS69 Part No. 1GAS74 Part No. 1GAS75 Part No. 1GAS76 Part No. 1GAS77 Part No. 1GAS78 Part No. 1GAS79 Part No. 1GAS97 Part No. 1GAS98 Fuel Gauge 0-90 Ohm Gas Gauge Part No. GA200 Low Level Sensors For positive indication of low fuel levels. 12" probe - Part No. 1ELE13 24" probe - Part No. 1ELE08 Electronic fuel level sending units are very durable and specially designed for fuel cells and bladders. OHM Range is empty to full. V indicates VDO style. Low level light assemblies and custom sizes are available by special order. Probe Length 6” 7” 7” 8” 9” 10” 10” 11” 11” 12” 13” 15” 16” 17” 23” OHM Range (Empty - Full) 0 - 90 0 - 90 76 - 6 0 - 90 0 - 90 0 - 90 76 - 6 0 - 90 76 - 6 0 - 90 0 - 90 76 - 6 0 - 90 0 - 90 0 - 90 Part No. SU06 0-90 SU07 0-90 SU07 76-6 SU08 0-90 SU09 0-90 SU10 0-90 SU10 76-6 SU11 0-90 SU11-V 76-6 SU12 0-90 SU13 0-90 SU15-V 76-6 SU16 0-90 SU17 0-90 SU23 0-90 DISPLACEMENT BLOCKS NYLON WASHER KITS 1.080" ID x 1.5" OD (10 count) -10 bulkhead fitting (10 count) -8 bulkhead fitting (10 count) .583" ID x .937" OD (10 count) .25" ID x .5" OD (50 count) FUEL SENDING UNITS Part No. GK53 Part No. GK54 Part No. GK55 Part No. GK56 Part No. GK57 Tune your fuel cell's volume. Custom sizes also available. 1/8 gallon, 2-7/8" x 2-7/8" x 3-3/8" 1/2 gallon, 8-3/4" x 3-1/2" x 3-1/2" 1 gallon, 8-1/4" x 5-1/4" x 5-1/4" 2 gallon, 5" x 8" x 12" Part No. DB025 Part No. DB050 Part No. DB100 Part No. DB200 DIP STICKS Float Switch (350 Milliamp) Part No. 1ELE51 800-433-6524 LED Panel Light LED 12 Volt Panel Light Part No. 1ELE52 www.fuelsafe.com NEW! Dip Stick Kit -6 or -8 bulkhead. Standard length is 24" Part No. FL06 Part No. FL08 firstname.lastname@example.org Filler Cap 1-3/4" non-vented, black anodized finish. Standard length is 18" Part No. FC175-DS Fuel level stick 36" length Part No. FLS fuel safe racing products 30 marine fuel cells MARINE PILLOW BLADDERS Fuel Safe’s pillow bladders are an excellent choice for transport and containment of many liquids including gasoline, diesel and water. These specialty pillow bladders are collapsible and easy to store in small confined areas. Fuel Safe’s materials are lightweight and tough with great resistance to the extreme weather conditions common in the marine industry. Fuel Safe pillow bladders come complete with a fill plate, a drain elbow and a one-year warranty. Custom sizes are available. Transfer Pump Marine Fuel Bladder Part No. TP40 (optional) Drain Kit Part No. PB-Drain Kit (optional) Part No. Capacity Length Width Height SF25/SW25 25 gal. 35" 33" 8" SF50/SW50 50 gal. 65" 33" 8" SF100/SW100 100 gal. 48" 65" 16" SF150/SW150 150 gal. 60" 65" 16" SF200/SW200 200 gal. 72" 65" 16" SF250/SW250 250 gal. 85" 65" 16" SF300/SW300 300 gal. 100" 65" 16" SF500/SW500 500 gal. 90" 98" 24" SF750/SW750 750 gal. 120" 98" 24" SF1000/SW1000 1000 gal. 150" 98" 24" Note: SF part numbers are fuel bladders, SW part numbers are water bladders. Marine Fuel Bladder Part No. SF100 MARINE RACING & CUSTOM CELLS Our Marine Racing Fuel Cells are custom made to fit your boat perfectly. They are constructed of a flexible reinforced high strength material that is designed to provide the ultimate in safety for you and the environment. Fuel Safe bladders can take the impact, vibration and pounding of the heaviest seas. Custom Prow Bladder Custom "V" Bottom Bladder fuel safe racing products Aux Fuel Bladder with environmental coating Extended Range Bladders 800-433-6524 www.fuelsafe.com email@example.com industrial applications 31 Fuel Safe is a division of Aircraft Rubber Manufacturing (ARMUSA). ARM-USA manufactures a wide variety of industrial fuel containment solutions for the defense, aerospace and industrial markets. From our aerial fuel delivery fuel drums, Pro Barrel® to ARM-R-COAT® self-sealing fuel tanks, ARM-USA delivers unique solutions for fuel storage, transport and containment. We are ISO 9001:2008 certified and offer a host of specialized services including CAD design, 3D modeling, mil spec welding, precision machining, rotational molding and contract manufacturing. 500 gallon Pro Barrel in refueling operation www.probarrel.com Custom saddle tank bladder Armored MRAP fuel tank JLTV prototype fuel tank Armored helicopter fuel tanks Custom NASCAR® test tank F-550 Self-sealing fuel tank MRAP Alpha Fuel Bladders 800-433-6524 www.fuelsafe.com firstname.lastname@example.org fuel safe racing products FUEL SAFE SYSTEMS AIRCRAFT RUBBER MANUFACTURING, INC 1550 NE Kingwood Ave, Redmond, OR 97756 541-923-6005 | 800-433-6524 | Fax 541-923-6600 www.fuelsafe.com | Email email@example.com SHOP ONLINE: WWW.FUELSAFE.COM PRODUCT LIABILITY DISCLAIMER: THE MATERIALS AND PRODUCTS ARE SUPPLIED “AS IS” AND “WITH ALL FAULTS.” No warranties except those implied by law and which cannot be excluded are given by ARM/Fuel Safe, their manufacturers, distributors, owners, employees, directors, vendors, promoters, parent companies or affiliates in respect of the materials and products supplied. Where it is lawful to do so, the liability of ARM/Fuel Safe for a breach of a condition or warranty is limited to either the rectification or replacement of the materials or products or a refund of the purchase price paid for the materials or products (excluding any delivery charges), as determined by ARM/Fuel Safe in its discretion. To the extent permitted by law, ARM/Fuel Safe will not be liable for any consequential loss or damage suffered as a result of the use of materials or products supplied by ARM/Fuel Safe. This remedy is expressly agreed to be exclusive. ARM/FUEL SAFE EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE. Notwithstanding ARM/Fuel Safe’s excellent safety record; RACING, PIT STOPS AND FLAMMABLE FUEL HANDLING ARE INHERENTLY VERY DANGEROUS ACTIVITIES. The user or consumer acknowledges and warrants that it has relied on its own skill and judgment or that of its professional advisers on the suitability of the materials or products for specific purposes and indemnifies and holds ARM/Fuel Safe harmless from and against any suit, claim, demand or compensation which the user or consumer or others may have against ARM/Fuel Safe in relation to the materials or products provided to the user or consumer and the user or consumer’s use of the products or materials. ALL RISKS ARE ASSUMED BY THE USER OR CONSUMER. Thank you for your understanding. DN 198 Copyright 2014 ARM, Inc.