Pro Fitness | Magnetic | Owner`s manual | Pro Fitness Magnetic Owner`s manual

Pro Fitness Magnetic Owner`s manual
PAROS
PAROS PRO
EXERCISE BIKE OWNER’S MANUAL
IMPORTANT PRECAUTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this bike. When using an electrical product, basic precautions should always be followed, including
the following: Read all instructions before using this bike. It is the responsibility of the owner to ensure that all users of this bike are
adequately informed of all warnings and precautions.
WARNING
PAROS
PAROS PRO
To reduce the risk of burns, fire, electrical shock or injury to persons:
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.
• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.
• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.
• Do not wear clothes that might catch on any part of the bike.
• Do not turn pedal arms by hand.
• Make sure handlebars are secure before each use.
• Do not insert or drop any object into any opening.
• Unplug bike before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents.
(See MAINTENANCE)
• This bike should not be used by persons weighing more than 136kg Failure to comply will void the warranty.
• The exerciser complies with the EN957-1/-5 standard, class of exerciser:HA; braking system is adjustable.
• This bike is intended for in-home use only. Do not use this bike in any commercial, rental, school or institutional setting. Failure to
comply will void the warranty.
• Do not use bike in garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply this may void the warranty.
• Use the bike only as described in this manual.
At NO time should pets or children under the age of 12 be closer to the bike than 10 feet.
At NO time should children under the age of 12 use the bike.
Children over the age of 12 should not use the bike without adult supervision.
It is essential that your bike is used only indoors, in a climate controlled room. If your bike has been exposed to colder temperatures
or high moisture climates, it is strongly recommended that the bike is warmed up to room before first time use. Failure to do so may
cause premature electronic failure.
3
BEFORE YOU BEGIN
CONGRATULATIONS! on choosing your bike. You’ve taken an important step in developing and sustaining an exercise program! Your
bike is a tremendously effective tool for achieving your personal fitness goals. Regular use of your bike can improve the quality of your
life in so many ways.
PAROS
PAROS PRO
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new bike will help you eliminate obstacles that prevent you from
exercising. Inclement weather and darkness won’t interfere with your workout when you use your bike in the comfort of your home. This
guide provides you with basic information for using and enjoying your new machine.
LOCATION OF THE BIKE
Place the bike on a level and stable surface. There should be 6 feet of clearance behind the bike, 3 feet on each side and one foot in
front for the power cord (See diagram to the right). Do not place the bike in any area that will block any vent or air openings. The bike
should not be located in a garage, covered patio, near water or outdoors.
4
ASSEMBLY
WARNING
There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the
fitness bike could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage
to the fitness bike, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your bike’s serial number located on the front stabilizer tube and enter it in the space provided below.
Also locate the model name which is next to the serial number.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
SERIAL NUMBER:
MODEL NAME:
Horizon
BIKE
5
PAROS PRO
SHOWN
CONSOLE
BODY
PULSE GRIP HANDLEBARS
FAT
RESE
T
KÖRPER
FETT
RECO
VERY
NULLST
ELLUNG
STAR
STOP T/
MOD
E
ERHOLU
NG
P1
DOW
N
START/
STOPP
P7
P2
P3
PROGR RAM
AMME S
P9
UP
AUSWA
HL
PROG
P8
SENKEN
ERHÖH
EN
P4
P10
P5
P11
P6
P12
CONSOLE MAST
SEAT POST TUBE
SEAT HEIGHT ADJUSTMENT KNOB
SEAT
CONSOLE MAST GROMMET
SEAT POSITION ADJUSTMENT KNOB
SHROUD
CRANK
FRONT STABILIZER TUBE
PEDALS
POWER CORD SOCKET
6
REAR STABILIZER TUBE
PAROS PRO
TOOLS INCLUDED:
FF 5mm L Wrench
FF Flat Wrench
PARTS INCLUDED:
FF 1 Main Frame
FF 1 Front Stabilizer Tube
FF 1 Rear Stabilizer Tube
FF 1 Console
FF 1 Console Mast
FF 1 Console Mast Grommet
FF 1 Handlebar
FF 1 Left & Right Handlebar Covers
FF 1 Seat
FF 1 Seat Post
FF 2 Pedals with Straps
FF 1 Power Cord
FF 1 Hardware Kit
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the carton on a level flat surface.
It is recommended that you place a protective covering on your floor. Never open box
when it is on its side.
PAROS
PAROS PRO
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
NEED HELP?
If you have questions or if
there are any missing parts,
contact your local dealer.
7
ASSEMBLY STEP 1
NOTE: There is no hardware for this step.
PAROS
PAROS PRO
MAIN FRAME
PRE-INSTALLED BOLTS
FRONT STABILIZER TUBE
REAR STABILIZER TUBE
8
A
Attach the REAR STABILIZER TUBE to MAIN
FRAME using 2 PRE-INSTALLED BOLTS.
B
Attach the FRONT STABILIZER TUBE to MAIN
FRAME using 2 PRE-INSTALLED BOLTS.
ASSEMBLY STEP 2
HARDWARE PARTS:
68 67 69
CONSOLE MAST
66
C
ARC WASHER (69)
Φ8 x Φ19 x 1.5T
Qty: 2
SPRING WASHER (67)
Φ8
Qty: 6
FLAT WASHER (66)
Φ8 x Φ19 x 1.5T
Qty: 4
PAROS
PAROS PRO
67 68
CONSOLE CABLES
B
BOLT (68)
M8 x 15
Qty: 6
CONSOLE MAST
GROMMET
A
A
Slide CONSOLE MAST GROMMET from
bottom up the CONSOLE MAST.
B
Attach CONSOLE CABLES and tuck cables
into MAIN FRAME carefully.
C Slide CONSOLE MAST into MAIN FRAME
using 4 BOLTS (68), 4 SPRING WASHERS
(67), 4 FLAT WASHERS (66) from both sides
and 2 BOLTS (68), 2 SPRING WASHERS
(67), 2 ARC WASHERS (69) from front side.
MAIN FRAME
D
Slide CONSOLE MAST GROMMET down over
MAIN FRAME.
NOTE: Be careful not to pinch any wires while attaching
the console mast.
9
ASSEMBLY STEP 3
NOTE: There is no hardware for this step.
PAROS
PAROS PRO
SEAT
SEAT POST
SEAT HEIGHT
ADJUSTMENT KNOB
MAIN FRAME
10
A
Attach SEAT to SEAT POST.
B
Pull the SEAT HEIGHT ADJUSTMENT KNOB
outward while sliding the SEAT POST into MAIN
FRAME.
ASSEMBLY STEP 4
NOTE: There is no hardware for this step.
LEFT PEDAL
A
Attach the RIGHT PEDAL to the RIGHT CRANK
ARM, tightening it CLOCKWISE with the provided
flat wrench.
B
Attach the LEFT PEDAL to the LEFT CRANK ARM,
tightening it COUNTER-CLOCKWISE with the
provided flat wrench.
PAROS
PAROS PRO
LEFT CRANK ARM
RIGHT PEDAL
RIGHT CRANK ARM
11
ASSEMBLY STEP 5
HARDWARE PARTS:
PAROS
PAROS PRO
T KNOB (17)
M8 x 55mm
Qty: 1
HANDLEBAR
BUSHING (18)
Φ8 x Φ13 x 35mm
Qty: 1
HANDLEBAR WIRE
17
18
CONSOLE MAST
12
A
Feed the HANDLBAR WIRES through the hole in the
CONSOLE MAST and out the top of the CONSOLE
MAST.
B
Attach the HANDLEBAR to CONSOLE MAST using
1 BUSHING (18) and 1 T KNOB (17).
ASSEMBLY STEP 6
NOTE: There is no hardware for this step.
CONSOLE
A
Connect the CONSOLE CABLES and carefully tuck
the CONSOLE CABLES into the CONSOLE MAST.
B
Attach the CONSOLE to the CONSOLE MAST using
4 PRE-INSTALLED BOLTS.
PAROS
PAROS PRO
70
7
NOTE: Be careful not to pinch any wires while attaching
the console.
CONSOLE CABLES
PRE-INSTALLED BOLTS
CONSOLE MAST
13
ASSEMBLY STEP 7
NOTE: There is no hardware for this step.
PAROS
PAROS PRO
LEFT CONSOLE MAST COVER
PRE-INSTALLED BOLT
RIGHT CONSOLE
MAST COVER
PRE-INSTALLED SCREW
CONSOLE MAST
PRE-INSTALLED BOLT
14
A
Attach the LEFT & RIGHT CONSOLE MAST
COVERS to the CONSOLE MAST using 4 PREINSTALLED BOLTS and 1 PRE-INSTALLED
SCREWS.
B
Plug in POWER ADAPTER.
ASSEMBLY STEP 8
ASSEMBLY COMPLETE!
PAROS PRO
SHOWN
PAROS & PAROS PRO
Max. User Weight: 136 kg / 300 Ibs
Product Weight: 31kg / 68 Ibs
Overall Dimensions: 103 x 60 x 135 cm / 41” x 23” x 53”
15
BIKE OPERATION
ADJUSTING THE SEAT
To adjust the seat by rotating the knob and loosen the screw. Pull out the knob and adjust the seat to a comfortable pedaling position
(one that keeps a slight bend in your knee while your legs are in the extended position). Lock the screw by rotating knob clockwise
until it tightens.
NOTE: It is recommended that you do not sit on the seat while adjusting its position.
ADJUSTING THE HANDLEBAR
To adjust the handlebar by rotating the knob and loosen the screw. Then, pull out the knob and adjust the handlebar to a position you
prefer. Lock the screw by rotating knob clockwise until it tightens.
WARNING
Do not operate the bike if the adaptor is damaged. If the bike appears to not be working properly, do not use the bike.
WARNING
Our bikes are well built and heavy! Use care and additional help if necessary when moving.
16
PAROS CONSOLE DISPLAY
PAROS PRO CONSOLE DISPLAY
PAROS
PAROS PRO
F
E
D
C
MODE
DOWN
UP
BODY FAT
AUSWAHL
SENKEN
ERHÖHEN
KÖRPERFETT
BODY FAT
RESET
RECOVERY
START/
STOP
KÖRPERFETT
NULLSTELLUNG
ERHOLUNG
START/STOPP
B
A
F
E
D
C
B
RESET
RECOVERY
START/
STOP
MODE
DOWN
UP
NULLSTELLUNG
ERHOLUNG
START/STOPP
AUSWAHL
SENKEN
ERHÖHEN
PROGRAMS
PROGRAMS
PROGRAMME
PROGRAMME
P1
P2
P3
A
P4
P5
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P6
17
PAROS & PAROS PRO CONSOLE OPERATION
PAROS
PAROS PRO
A) UP/DOWN key
1) Press to increase and decrease the value.
2) Press to scroll and browse items which you can select.
3) Press to increase and decrease the resistance.
B) MODE key
1) Changing display and confirm data setting .
2) After Body Fat testing press Mode key to change display.
C) START/STOP key
To start and pause a workout.
D) RECOVERY key
If heart rate data is available, you can press Recovery key to start
the Recovery function.(Refer to Recovery operation on page 19
for more information)
E) RESET key
When data setting, press Reset key to default value.
Hold the Reset key for 3 seconds to reset the system at anytime
during workout.
F) BODY FAT
For evaluating body fat and BMI index. (Refer to page 19 for more
operation information)
18
SETUP YOUR PERSONAL DATA
This console is able to store your personal data which includes
name, gender, age and weight. This allows you to start your workout
more quickly. To set up your data, please follow the procedure as
below,
1) Select user from 1 to 4
2) Select your gender
3) Select your age
4) Select your weight
5) The console is able to store up to 4 users’ data and you may
modify your setting before your daily workouts.
START YOUR WORKOUT
1) Make sure the power is on.
2) Press Mode key to enter main menu after finish user setting.
3) Press Up/Down key to select workout in main menu, then press
mode key to confirm.
4) To choose preset programs please select program and press
mode key.
5) After workout selection, press Up/Down key to set the
workout time.
6) Press Start key to start the workout.
QUICK START
1) Make sure the power is on.
2) Simply press the “START” key and begin exercising.
Manual
Select manual at main menu and press start before workout
selection.
HRC
1) finish personal data setting and enter main menu.
2) select HRC program at main menu and press mode key to
enter setting.
3) select among 55%, 75% and 90% target or choose H.R.C.
Target to set your desired number between 30 to 230.
User Program
1) select User program at main menu and use up/down and
mode key to set your own workout.
2) press mode key for 3 seconds for confirming setting
WORKOUT RECOVERY
After exercising for a period of time (more than 30 seconds),
Press RECOVERY key, hold onto the handgrips to conduct a
workout recovery test.
TIME will count down from 00:60 to 00:00 and then show your
heart rate recovery status from F1,F2….to F6.
(F1-F6 stands for your Fitness quotient, with F1 being the best result)
User may keep exercising to improve the heart rate recovery
status. (Press the RECOVERY button again to return the main
display)
BODY FAT MEASUREMENT
1) Select User from U1 - U4 & workout then press START key.
2) After the selected workout is finished or stopped, press BODY
FAT button to enter.
3) Holding both pulse grips for 8-10 seconds then test results
(percentage and BMI rate) will be displayed on LCD for 30
seconds.
PAROS
PAROS PRO
B.M.I. (Body mass index) integrated
B.M.I
LOW
LOW/MED
MEDIUM
MED/HIGH
RANGE
<20
20-24
24.1-26.5
>26.5
FAT%
(-)
LOW
(+)
LOW/MED
MEDIUM
MED/HIGH
MALE
<13%
13%-25.9%
26%-30%
>30%
FEMALE
<23%
23%-35.9%
36%-40%
>40%
BODY FAT:
Watts Control (PAROS pro ONLY)
1) Finish user setting and enter workout selection.
2) Select Watts control program at main menu and press mode key.
3) Set target watt value by using up/down key.
4) Press start after finish setting.
ENERGY SAVER
To minimize energy consumption, your machine will enter energy
saver mode automatically when not in use for 4 minutes and could
be quickly activated again with a touch of a button.
CALENDAR AND TIME
While powering on, this console will allow you to set the CALENDAR
and TIME by using UP & DOWN keys and MODE key to confirm.
19
paros & paros pro preset PROGRAM PROFILES
PAROS PRO
20
• P1: Promotes weight loss by raising and lowering the
resistance level, while keeping you in your fat burning
zone.
• P4: Improves performance and stamina by raising the
resistance level to high peaks to simulate the most
difficult outdoor terrains.
• P2: Improves your strength, speed, and endurance by
raising and lowering the resistance levels throughout
your workout to involve both your heart and muscles.
• P5: Complete exercise program to help you enhance
body performance.
• P3: Challenges with various combinations of hills and
valleys (resistance) to burn more fat when exercising.
• P6: Increasing resistance for advanced users to tone
your muscles, and challenges yourself.
preset PROGRAM PROFILES (PAROS PRO ONLY)
• P7: Recover your heart and muscles after intensive
workout.
• P10: Improves performance and stamina by raising
the resistance level to high peaks to simulate the hill
environment.
• P8: Simulates plateau hiking by increasing and
decreasing the resistance gradually.
• P11: Improve heart and lung capacity by simulates daily
jogging.
• P9: Gradually increasing resistance with hills and
valleys allows user to reach their daily target.
• P12: Improves your strength, speed and endurance by
automatically changing the resistance levels through-out
your workout.
PAROS
PAROS PRO
21
MONITORING YOUR HEART RATE
Feedback
Your Horizon Fitness bike offers two heart rate feedback options. You may choose to use the heart rate handlebars, or the chest
transmitter (sold separately) for a hands free workout.
PAROS
PAROS PRO
Heart Rate Handlebar
Place the palm of your hands directly on the heart rate handlebars. Both hands must grip the bars for your heart rate to register.
When gripping the handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Try to maintain moderate
pressure while holding onto the heart rate handlebars. It is recommended that you hold the handlebars only long enough the see your
heart rate readout on the console. You may experience an erratic readout if consistently holding the handlebars.
Telemetric Chest Transmitter (sold separately)
Prior to wearing the chest transmitter (sold separately) on your chest, moisten the two rubber electrodes with water. Center the chest
strap just below the breast or pectoral muscles, directly over your stermum, with the Horizon Fitness logo facing out. NOTE: The chest
strap must be tight and properly placed to receive an accurate and consistent readout. If the chest strap is too loose, or positioned
improperly, you may receive an erratic or inconsistent heart rate readout.
Warning!
The heart rate reading is intended only as an exercise aid and not for medical purpose. Your heart rate monitoring systems may be
inaccurate. Various factors may affect the accuracy of your heart rate reading. Over exercise may result in serious injury or death.
If you feel faint stop exercise immediately.
22
CONDITIONING GUIDELINES
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
HOW OFTEN? (Frequency of Workouts)
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain cardiovascular fitness. If you
have other goals such as weight or fat loss, you will achieve your goal faster with more frequent exercise. Whether it’s 3 days or 6 days,
remember that your ultimate goal should be to make exercise a lifetime habit. Many people are successful staying with a fitness program
if they set aside a specific time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or
while watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a time when you
won’t be interrupted. To be successful with your fitness program, you have to make it a priority in your life. So decide on a time, pull out
your day planner and pencil in your exercise times for the next month!
PAROS
PAROS PRO
HOW LONG? (Duration of Workouts)
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session. But start slowly and
gradually increase your exercise times. If you’ve been sedentary during the past year, it may be a good idea to keep your exercise times
to as little as five minutes initially. Your body will need time to adjust to the new activity. If your goal is weight loss, a longer exercise
session at lower intensities has been found to be most effective. A workout time of 48 minutes or more is recommended for best weight
loss results.
HOW HARD? (Intensity of Workouts)
How hard you workout is also determined by your goals. If you use your machine to prepare for a 5K workout, you will probably work
out at a higher intensity than if your goal is general fitness. Regardless of your long term goals, always begin an exercise program at low
intensity. Aerobic exercise does not have to be painful to be beneficial!
23
MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance step is to simply wipe your
perspiration off the trainer after each use.
PAROS
PAROS PRO
HOW DO I CLEAN MY BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your bike and its operating environment will keep maintenance problems and service callstoaminimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the bike by unplugging the power cord from the wall outlet
• Wipe down the bike with a damp cloth. Never use solvents, as they can cause damage to the bike.
• Inspect the power cord. If the power cord is damaged, contact HorizonFitness.
• Make sure the power cord is not underneath the bike or in any other area where it can become pinched or cut.
NOTE:
The safety level of the equipment can be maintained only if it is examined regularly for damage and wear, e.g. connection parts. If any
deterioration is observed, immediately replace all faulty parts and do not use until it is repaired.
WARNING
To remove power from the bike, the power cord must be disconnected from the wall outlet.
WEEKLY
Clean underneath the bike, following these steps:
• Turn off the bike.
• Move the bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the bike.
• Return the bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
24
PAROS EXPLODED VIEW
25
PAROS parts list
NO.
26
DESCRIPTION
NO.
DESCRIPTION
1
COMPUTER
24
Φ17XΦ22X1T WASHER
2
END CAP FOR FIXED HANDLEBAR
25
Φ6.5XΦ25X1T PLASTIC WASHER
3
HANDLEBAR
26
M6 NUT
4
M3.5*20 SELF-TAPING SCREW
27
Φ6.5XΦ19X1.5T WASHER
5
HANDLE PULSE PAD
28
Φ17.5XΦ22X0.5T CURVED WASHER
6
HANDLEBAR SPONGE
29
JUMP RING
7
HANDLE PULSE CABLE
30
CONNECTING LINK
8L
COMPUTER PLASTIC COVER LEFT
31
SEAT HIGH ADJUSTABLE KNOB
8R
COMPUTER PLASTIC COVER RIGHT
32
M4.5X25MM SELF-TAPING SCREW
9
M5X12MM BLACK SCREW
33
SLIPING TUBE
10
M4X15MM SELF-TAPING SCREW
34
SLIPING TUBE FIXED NUT
11
SADDLE(SB-27)
35L
CRANK LEFT
12
END CAP
35R
CRANK RIGHT
13
SEAT POST
14L
14R
36
HEXAGON BOLT
SEAT PLASTIC COVER LEFT
37L
FOOTPLATE LEFT
SEAT PLASTIC COVER RIGHT
37R
FOOTPLATE RIGHT
15
SCREW FOR SLIDE SEAT
38L
CHAIN COVER LEFT
16
M5X12MM NICKEL PLATING SCREW FOR COMPUTER
38R
CHAIN COVER RIGHT
17
T SHARP KNOB(LD15)
39
M5X15MM SCREWV
18
TUBE SPACER
40
M10XP1.25 NUT
19
LOWER COMPUTER CABLE
41
ALLEN BOLT
20
SENSOR
42
M6 HEX NUT
21
OUT CABLE
43
HEX AGON BOLT
22
ROUND HEAD PULL PIN
44
FLY WHEELCOMPLETE MANDRIL
23
INNER PLASTIC COVER
45
FLYWHEEL COMPLETE
NO.
DESCRIPTION
NO.
DESCRIPTION
46L
REAR STABILIZER BAR END CAP LEFT
69
Φ8XΦ19X1.5T CURVED WASHER
46R
REAR STABILIZER BAR END CAP RIGHT
70
UPPER COMPUTER CABLE
47
REAR STABILIZER BAR
71
MAIN POST
48
DC CABLE
72
Φ2.0X28 BLACK SPRING
49
FLAT HEAD HEXAGON BOLT
73
M8X5T WHITE ZINC HEX NUT
50
Φ6XΦ13X1.5T FLAT WASHER
74
M8X20 ALLEN BOLT
51
SPRING WASHER
75
AXLE FOR IDLER
52
TAPER SPRING
76
CURVED WASHER
53
MOTOR
77
IDLER
54
M5X15MM SCREW
78
M8 NICKEL PLATING NUT
55
6003 2RS BEARING
79
M10X4TXP1.25 HEX NUT
56
Φ17XΦ22X2T WASHER
80
6300 2RS BEARING
57
Φ240 BELT WHEEL
81
Φ30XΦ34X1T WASHER
58
BELT
82
Φ280 MAGNETIC FLYWHEEL
59
PEDAL AXLE
83
ONE DIRECTION BEARING
60
M8X15MM BLACK ALLEN BOLT
84
6203 2RS BEARING
61
CRANK END CAP
85
FLYWHEEL MANDRIL
62
MAIN POST PL ASTIC COVER
86
SMALL R ATCHET WHEEL
63L
FRONT STABILIZER END CAP LEFT
87
6000 2RS BEARING
63R
FRONT STABILIZER END CAP RIGHT
88
ALLEN KEY WRENCH
64
FRONT STABLILIZER BAR
89
COMBINATION WRENCH
65
MAIN FR AME
90
ADAPTOR
66
Φ8XΦ19X1.5T FL AT WASHER
67
Φ8 SPRING WASHER
68
M8X15MM NICKEL PLATING ALLEN BOLT
27
PAROS pro EXPLODED VIEW
28
PAROS pro parts list
NO.
DESCRIPTION
NO.
DESCRIPTION
1
COMPUTER
24
Φ17XΦ22X1T WASHER
2
END CAP FOR FIXED HANDLEBAR
25
Φ6.5XΦ25X1T PLASTIC WASHER
3
HANDLEBAR
26
M6 NUT
4
M3.5*20 SELF-TAPING SCREW
27
Φ6.5XΦ19X1.5T WASHER
5
HANDLE PULSE PAD
28
Φ17.5XΦ22X0.5T CURVED WASHER
6
HANDLEBAR SPONGE
29
JUMP RING
7
HANDLE PULSE CABLE
30
CONNECTING LINK
8L
COMPUTER PLASTIC COVER LEFT
31
SEAT HIGH ADJUSTABLE KNOB
8R
COMPUTER PLASTIC COVER RIGHT
32
M4.5X25MM SELF-TAPING SCREW
9
M5X12MM BLACK SCREW
33
SLIPING TUBE
10
M4X15MM SELF-TAPING SCREW
34
SLIPING TUBE FIXED NUT
11
SADDLE(SB-27)
35L
CRANK LEFT
12
END CAP
35R
CRANK RIGHT
13
SEAT POST
14L
14R
36
HEXAGON BOLT
SEAT PLASTIC COVER LEFT
37L
FOOTPLATE LEFT
SEAT PLASTIC COVER RIGHT
37R
FOOTPLATE RIGHT
15
SCREW FOR SLIDE SEAT
38L
CHAIN COVER LEFT
16
M5X12MM NICKEL PLATING SCREW FOR COMPUTER
38R
CHAIN COVER RIGHT
17
T SHARP KNOB(LD15)
39
M5X15MM SCREWV
18
TUBE SPACER
40
M10XP1.25 NUT
19
LOWER COMPUTER CABLE
41
ALLEN BOLT
20
SENSOR
42
M6 HEX NUT
21
OUT CABLE
43
HEX AGON BOLT
22
ROUND HEAD PULL PIN
44
FLY WHEELCOMPLETE MANDRIL
23
INNER PLASTIC COVER
45
FLYWHEEL COMPLETE
29
NO.
30
DESCRIPTION
NO.
DESCRIPTION
46L
REAR STABILIZER BAR END CAP LEFT
69
Φ8XΦ19X1.5T CURVED WASHER
46R
REAR STABILIZER BAR END CAP RIGHT
70
UPPER COMPUTER CABLE
47
REAR STABILIZER BAR
71
MAIN POST
48
DC CABLE
72
Φ2.0X28 BLACK SPRING
49
FLAT HEAD HEXAGON BOLT
73
M8X5T WHITE ZINC HEX NUT
50
Φ6XΦ13X1.5T FLAT WASHER
74
M8X20 ALLEN BOLT
51
SPRING WASHER
75
AXLE FOR IDLER
52
TAPER SPRING
76
CURVED WASHER
53
MOTOR
77
IDLER
54
M5X15MM SCREW
78
M8 NICKEL PLATING NUT
55
6003 2RS BEARING
79
M10X4TXP1.25 HEX NUT
56
Φ17XΦ22X2T WASHER
80
6300 2RS BEARING
57
Φ240 BELT WHEEL
81
Φ30XΦ34X1T WASHER
58
BELT
82
Φ280 MAGNETIC FLYWHEEL
59
PEDAL AXLE
83
ONE DIRECTION BEARING
60
M8X15MM BLACK ALLEN BOLT
84
6203 2RS BEARING
61
CRANK END CAP
85
FLYWHEEL MANDRIL
62
MAIN POST PL ASTIC COVER
86
SMALL R ATCHET WHEEL
63L
FRONT STABILIZER END CAP LEFT
87
6000 2RS BEARING
63R
FRONT STABILIZER END CAP RIGHT
88
ALLEN KEY WRENCH
64
FRONT STABLILIZER BAR
89
COMBINATION WRENCH
65
MAIN FR AME
90
ADAPTOR
66
Φ8XΦ19X1.5T FL AT WASHER
67
Φ8 SPRING WASHER
68
M8X15MM NICKEL PLATING ALLEN BOLT
D: Entsorgungshinweis
Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness - Produkte sind recyclebar. Führen Sie das
Gerät am Ende der Nutzungsdauer einer sachgerechten Entsorgung zu (örtliche Sammelstelle).
GB: Waste Disposal
Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness products are recyclable. At the end if its useful
life please dispose of this article correctly and safely (local refuse sites).
F: Remarque relative à la gestion des dèchets
Les produits Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness sont recyclables. A la fin sa durrèe
d`utilisation, remettez I´appareil à un centre de gestion de dèchets correct (collecte locale).
NL: Verwijderingsaanwijzing
Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness producten zijn recycleerbaar. Breng
het apparaat aan het einde van de gebruiksduur naar een op recycling gespecialiseerd bedrijf (plaatselijk
verzamelpunt).
E: Informaciones para la evacuaciòn
Los productos de Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness son riciclables. Cuando se
termina la vida ùtil de un aparato o una màquina, entrèguelos an una impresa local de eleiminaciòn de residuos
para su reciclaje.
I: Indicazione sullo smaltimento
I prodotti Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness sono reciclabill. Quando
I`apparecchio non servirà più, portatelo in un apposito punto di raccolta della Vostra città (Punti di raccolta
comunall).
PL: Wskazòwka dotyczàca usuwania odpadòw.
Producty firmy Vision Fitness / Horizon Fitness / TEMPO Fitness / TREO Fitness podlegajà recyklingowi. Pod
koniec okresu o`ywalnoÈcl pros`z oddac urzàdzenie do wlaÈciwego punkto usuwania odpadòw (lokalny punkt
zbiorczy).
EXERCISE BIKE OWNER’S MANUAL
Paros & Paros Pro Owner’s Manual 0628’12 Rev. 1.4 © 2012 Horizon Fitness
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising