Cox Cable receiver Instructions
Below you will find brief information for Cable receiver. This document provides instructions on how to connect and activate your new cable receiver, which allows you to access your cable channels. The installation is straightforward and involves connecting the receiver to your TV and wall outlet. This document contains troubleshooting tips in case you encounter any problems during the setup process.
advertisement
▼
Scroll to page 2
Connect COLOR CODED cable ends to your receiver CABLE from WALL HD to TV POWER IMPORTANT CONNECT POWER LAST 1 2 Connect CABLE 1 to wall OUTLET Source Input 4 6 HDMI 3 HDMI Connect CABLE 2 to TV HDMI port Activate your receiver TV TURN ON RECEIVER+TV WAIT FOR CHANNEL PICTURE Select HDMI by pressing “Input” or “Source” button on TV Activate receiver to load all channels Connect POWER CORD to wall OUTLET 5 Dial the automated system and activate your receiver using the following order number: 1-877-751-9865 Troubleshoot Not seeing a picture? Ensure TV “Input” or “Source” is set to HDMI Not seeing all your cable channels? Make sure Cable 1 is connected to wall outlet and correct connector on receiver, then repeat Step 5 Any other questions? Call us anytime at 1-877-751-9865 Baton Rouge 520-0806 Conecta los cables CODIFICADOS POR COLOR a tu receptor CABLE from WALL HD to TV POWER IMPORTANTE CONECTA A LA CORRIENTE AL FINAL 1 2 Conecta el CABLE 1 a la TOMA DE CABLE de la pared Source Input 4 HDMI Conecta el CABLE 2 al puerto TV HDMI ESPERA LA IMAGEN DEL CANAL Selecciona HDMI presionando el botón de “Input” o “Source” en la TV Activa el receptor para cargar todos los canales Conecta el CABLE DE CORRIENTE al ENCHUFE en la pared Activa tu receptor TV PRENDE EL RECEPTOR + TV 6 3 HDMI 5 Llama al sistema automatizado y activa tu receptor usando el número de orden que aparece en el otro lado de las instrucciones 1-877-751-9865 Solución de problemas ¿No ves la imagen? Asegúrate de que la opción "Input" o "Source" en la TV esté en HDMI ¿No ves todos los canales de cable? Asegúrate de que el Cable 1 esté conectado a la toma de la pared y el conector correcto en el receptor, después repite el Paso 5 ¿Alguna otra pregunta? Llámanos en cualquier momento al 1-877-751-9865 520-0806
advertisement
Key Features
- Cable TV access
- HDMI connection
- Channel guide
- On-demand content
- Remote control
- Easy setup
Frequently Answers and Questions
What should I do if I do not see a picture on my TV after connecting the receiver?
Ensure that the TV's "Input" or "Source" is set to HDMI. If you still can't see a picture, double check that the cables are correctly connected to both the receiver and the wall outlet.
Why am I not seeing all of my cable channels?
Make sure Cable 1 is connected to the wall outlet and the correct connector on the receiver. Then, repeat Step 5 as explained in the instructions.
Can I contact support if I have any more questions?
Yes, you can call the provided number at 1-877-751-9865 anytime.
