ACME LED-CTL6 Specifications

ACME LED-CTL6 Specifications
2
LED
Lighting
28
Effect
Lighting
11
LED
Effects /
Controllers
20
30
Smoke & Haze
31
Controllers
E:Cue
lamps
Intelligent
Lighting
24
Stage & Studio
35
HardCaseCo
Road Cases
ColorBar 12TC
LED
er
Pow
Bar
W
10
D
E
L
ib
Invinc
Rage LED
LED Source 48
Matrix 4 LED
sh
a
W
ge
54
Sta
Theatre Spot
n
o
o
gS
n
mi
Co
TriColorPar
LED Centrelight
Light & Easy
ISSUE 16
LED Lighting
LED PAR
64
ILED-PAR64-LP-015 Polished
ILED-PAR64-LB-015 Black
LED Parcans bring a modern twist to the industry standard Parcan. The Parcan is
DMX controllable with a XLR 3 pin in and out, located on the rear of the can. Also
included is a LED display for DMX channel allocation. The Par64 RGB has 212 LEDs,
with 5mm LEDs and available in either black or polished finishes.
Red
Green
Remote Commander
ILED-RC
Features remote control ability.
Blue
ParLite 18
IL-00927
•
•
•
•
•
•
Designed for use with ILED-CC and ILED-PC300.
Choose 9 different colors by Hold Color button
Choose 32 color mix and fade-in/fade-out by Spectrum Mix button.
Activate the 12 pre-programmed chase patterns by Chase button
Sound activation is available via sound option
Designed to control LED Parcans
DMX
Pinspot
ILED-CP36-B-15D
The Parlite 18 is a compact LED Par delivering virtually infinite RGB color mixing options.
This fixture offers full DMX control plus stand alone programmable macros. The Parlite 18 is
constructed from light weight robust plastic and is suitable in various applictions from feature
lighting to stage illumination.
Electrical AC240V ~ 50Hz
LED
LED/Unit: 18 (6R : 12G : 12B)
Output/LED: 1W
Beam Angle: 15 degrees
Cooling: Forced air convection
Effects RGB color mixing/custom programs/strobe/dimmer/color macros/ID address/auto programs
Control Display panel/automatic/
custom/Pix Controller/Stand Alone/Slave/
DMX512: 3chs/4chs/9chs
Dimensions
Size: 205 x 157 x 207mm
Weight: 2.5Kg
Color: Black
2
The LED DMX Pinspot is a compact pinspot fixture ideal for mirror ball and table lighting.
Complete with RGB LEDs for simple, effective pin spot lighting. Color change controlled
remotely via DMX. Durable aluminium housing.
Power Supply: AC 240V ~ 50Hz
LEDs: 91 (R:31 G:30 B:30 )
Consumption: 10W
Beam Angle: 15°
Diamentions: 101x129.5x118.4mm
Weight: 1kg
LED Lighting
ISSUE 16
LED
PowerBar
ILED-PARBAR-4-B
Features smart bar with 4 extremely thin LED panels - Only 38mm
Powered control bar has 9 color presets and 12 built in shows with fade.
Like 4 Par 64 LED Pars in one convenient Par Bar.
This innovative, compact system makes setup quick and easy.
- DMX channels 4/ 13/ 16
- 3 operation modes: DMX, Master/Slave, and sound activation
- Optional CA-8 controls for instant lighting shows at your fingertips or by foot.
- The pack works with LED commander for fixed color, chases, spectrum mix, etc.
- 9 presets color, great 12 sound controllable shows and 1 fade performance. The speed of show and fade is adjustable.
- LED Panels are individually adjustable so light can be directed as desired
PACKAGE INCLUDES
- 4 x LED Panels
- 1 x 10m DMX Signal Cable
- 1 x 5m Power supply cable
- 1 x Stand Adaptor
ISPS-502- Stand Sold Separately
Power supply: 240V - 50Hz
LED Beam Angle: 15°
Power Consumption: 67W
LED: R 70, G 71, B 71 ( total 212 pcs)
Size: 1060x67x88mm
Weight: 9.2kgs
Light & Easy
Controller
ILED-0408
The Light and Easy Controller can control 8 groups of lighting fixtures, each with 4 channels
Features
- 8 buttons for separate control
- Digital LED display panel
- 8 button presets - by using the up and down buttons set up to 32 presets
- 8 button chases - by using the up and down buttons set up to 32 presets
- When CHASE is running, adjust speed and fade from the related fader
- Sound activation and independent Black out Button
- Strobe button - Strobe speed is adjustable from 1HZ to 20HZ
- 4 Channel Value (0-255) control, adjusted by faders
Power Input: DC9 - 12V 800mA
Size: 280x170x75mm
Weight: 1.5kgs
3
PRO
ISSUE 16
LED Lighting
TriColor
MultiPar 3W
Specification
Power input: AC 240V - 50Hz
LEDS: 21PCS RGB 3W tri-color 3pcs in one
Beam angle: 44 degree
4 digit LED display
8 built in programs
strobe effect - 1-25 flashes per second
dimming and blackout for all 3 colors
3 DMX channel modes: 3/4/6
Weight: 5kg
Size: 38×30×30cm
S
g
n
mi
Co
n
oo
MultiPar TC
Specification
Power input: AC 240V, 50Hz
Wattage: 80W
LEDS: 18PCS RGB 3W tri-color 3pcs in one
Beam angle: 40 degree
3PIN XLR
Built-in microphone
Weight: 6.7kg
Size: 30×27×22cm
AVailable
August 09
4
LED Lighting
ISSUE 16
LED Source
48
RGB 15° - IL-05083
RGB 30° - IL-05090
WHITE 15° - IL-05250
WHITE 30° - IL-05267
The LED Source 48 brings a fresh twist to standard wash
applications. Available in 2 models, the RGB model consists of
48 3W LEDs – 12Red, 12 Green, 12 Blue, 12White. The Warm
White model consists of 48 3W LEDs – 12 Cool White and 36
Warm White. RGB color mixing provides almost unlimited color
range as well as white light. Each unit is DMX controllable with
on board auto-programs and custom-program abilities. Other
functions include strobe, dimmer and auto-status sensing.
( barndoors sold separately)
LS-48-RGB
Electrical
LED
Effects
Control
Dimensions
LS-48WW
AC240V ~ 50Hz
IP Rating: IP67
LED/Unit: 48pcs x 3W (12R : 12G : 12B : 12W)
Beam Angle: 15/30 degrees
Cooling: Direct air convection
RGB color mixing/custom programs/strobe/dimmer/color macros/ID address/auto programs/ Custom Programs/ RGB to White/ RGB Calibration
Display panel/automatic/DMX512: 3chs/4chs/10chs/12chs
Size: 305 x 276 x 230mm
Weight: 8.5Kg
Color: Black/Silver
The IP LED Source 36 is suitable for both interior and exterior wash
applications. RGB color mixing provides virtually unlimited color range.
Each unit is DMX controllable with on board auto-programmers and
custom-program abilities. Other functions include strobe, dimmer and
auto-status sensing.
ELECTRICAL
LED
DMX CHANNELS
DIMENSIONS
OPTICS
Electrical
LED
Effects
Control
Dimensions
AC240V ~ 50Hz
IP Rating: IP67
LED/Unit: 48pcs x 3W (12CW : 36WW)
Beam Angle: 15/30 degrees
Cooling: Direct air convection
WA color mixing/strobe/dimmer/ID address/ WB Calibration
Display panel/automatic/DMX512: 3chs/4chs
Size: 305 x 276 x 230mm
Weight: 8.5Kg
Color: Black/Silver
IP LED
Source 36
iL-07506(silver 15°)
iL-07513(black 15°)
Voltage AC240V – 50Hz
IP Rating: IP65
Rated Power: 65W
LED/Unit: 36pcs (R12:G12:B12)
9 Channels
Size: 235 x 165 x 300mm
Weight: 5Kg
15°(Standard), 30°
5
PRO
ISSUE 16
LED Lighting
ColorBank
54
IL-06813
The ColorBank 54 provides a bright output ideal for all wash applications on stage and in the nightclub.
Grouped or individual control of the LED modules makes this fixture a great tool for any light show and with
specialized ID addressing it is possible to separately control up to 66 different fixtures from one DMX channel.
The IP65 rated weather-proof casing means that this fixture is also designed to meet the requirements of a
wide range of outdoor architectural applications.
Electrical:
LED:
Effects:
Control:
Size: Weight:
Color:
LED Bank
H.0
IL-00873
A high powered version of the popular ColorBank 54, this fixture can be used in multiple applications. This IP65
rated fixture is also suited for all weather outdoor use.
Consisting of 108 1W LEDs – 36 Red, 36 Green, and 36 Blue - the LEDBank H•O features 15° optics and delivers a
beam angle of 17° x 12°. On board automated programs can be operated via master/slave or DMX operation. Up
to 28 units of this fixture can be linked for ease of use.
Electrical:
LED
Effects:
Control:
Size: Weight: ColorBloc
48
IL-00880
240V 50Hz
IP Rating: IP65
Rated Power: 135W
LED: 108pcs (36R : 36G : 36B), Output/LED: 1W, LED Beam Angle: 15°, optional 30°
Beam angle: 17° x 12° (15° lenses), Field angle: 30° x 24° (15° lenses)
Lux: 23,457 (15° lenses), Cooling: Direct air convection
RGB color mixing/ Auto-programs/Strobe/ Dimmer/
Auto DMX Addressing/ ID address/Color Macros
DMX512/ Display Panel/ Automatic/ Pix Controller
DMX512 Mode: 12CHS
570x220x190mm
13kg
The ColorBloc 48 is a high powered LED wash fixture designed for a wide range of applications including
theatre, architecture, installation and live production. The IP65 rated weather-proof housing means that this
fixture is also designed to meet the requirements of outdoor architectural applications.
The unit ColorBloc 48 also features a unique ‘Hyper-Color’ setting that allows the LEDs to be driven at a higher
current for increased output.
On board programs can be operated via master/slave or DMX operation.
The ColorBloc 48 fixture includes 12 Red, 14 Green, 12 Blue and 10 White LEDs.
Electrical:
LED:
Effects:
Control:
Size: Weight: Color: 6
240V 50Hz | IP Rating: IP 66Rated | Power: 80W
LED: 54pcs (18R : 18G : 18B) | Output/LED: 1W | Beam Angle: 15°, Optional 30°
Cooling: Direct air convection
RGB color mixing/ Auto-programs/Strobe/ Dimmer/
Auto DMX Addressing(ADAS)/ ID address
DMX512/ Display Panel/ Automatic/ Pix Controller
DMX512 Mode: 12CHS
570 x 210 x 190mm
8.2Kg
Black
240V 50Hz
IP Rating: IP65
Rated Power: 165W
LED/Unit: 48 (12 red, 14 green, 12 blue, 10 x white)
Beam Angle: 10°/15°/30° (15° lenses installed - 30° lenses optional)
Cooling: Direct air convection
RGB color mixing/auto programs/strobe/dimmer/auto DMX addressing (ADAS)/
ID address/ Remote Address System(RAS)
DMX512/Display Panel/Automatic/Pix Controller
DMX512 Mode: 3CHS/ 4CHS/ 5CHS/9CHS
380 x 200 x 190mm
8Kg
Black (standard) /Silver/White
LED Lighting
ISSUE 16
ColorBar
12TC
ILED-BD12TC-025
ILED-BD12TC-040
The ColorBar-12TC is a vibrant linear LED fixture comprising of 12 x 3W Tri-Color LEDs in clusters of four individually
controlled cells. Its modular design makes it ideal for an array of lighting applications , from cyc illumination to pixilation
and other visual effects. The ColorBar-12TC that can be operated via DMX as well as stand alone/master slave. Its compact and Modular design,
enables this fixture to be linked together in multiple units with in and out data and power to create a large single pixel
line effect or array.
Electrical:
LED:
Effects:
Control:
Size: Weight: Color: Voltage: 240V ~ 50Hz | Rated Power: 40W
Total LED: 12 X 3W Tri-Color LED
50, 000 hrs rated lifespan (Avg)
Beam Angle: 25°/40°
RGB Mixing/Auto-programs/Custom programs/All effects and
programs activated by DMX/4 LED Zones, can change separately
DMX512/LCD Display Panel/Automatic Stand alone/Slave
324x95x178mm
3.9Kg
Black
LEDLine 24
IL-00910
The LED Line 24 is a dynamic LED fixture utilizing 24 1W LEDs in four individually controlled
sections making it ideal for cyc washing, pixel mapping and other visual effects.
The LED Line 24 features on board pixel effect macros that can be operated via master/slave
or DMX operation. Modular in design, this fixture can be linked together in multiple units
and daisy chained for data and power to create a large single pixel line effect.
Electrical: 240V 50Hz
Rated Power: 45W
LED:
Total LED: R:8 G:8 B:8
Output/LED: 1W
Beam Angle: 15°, Optional 10° or 30°
Cooling: Direct air convection
Effects:
RGB color mixing/Custom programs/Auto-programs/Strobe/Dimmer/Pixel effect/Color macros/Fan speed control/ ID address
Control:
DMX512/ Display Panel/ Automatic/ Pix Controller
DMX512 Mode: 12CHS
Size: 434 x 138 x 127.5mm
Weight: 3.2Kg
Color: Black
StageLED
45
IL-00897
The Stage LED 45 is a high powered LED fixture designed for many applications including theatre, architecture,
installation, exhibition and live production. With full DMX functionality including color mixing, strobe control and
dimming, the Stage LED 45 can be used as a RGB wash, color changing effect light and pixel line fixture.
Consisting of 45 1W LEDs – 15 Red, 15 Green and 15 Blue – the Stage LED 45 features standard 15° optics with the option
of 10° and 30° optics. Operates via full DMX control as well as master/slave or stand alone.
Electrical:
LED:
Effects: Control:
Size: Weight: Color:
240V 50Hz | Rated Power: 85W
Output/LED: 1W | LED/Unit: 45pcs (15R : 15G : 15B)
???
LED Beam Angle: 15°, optional 10° or 30° | Cooling: Direct air convection
RGB color mixing/Auto-program/Custom program/
Strobe/Dimmer/Fan speed control/Pixel effect/Color
macros/ID address
Display Panel/ Automatic/ Pix Controller
DMX512 (12CHS)
426x295x306mm
6kg
Black
7
PRO
ISSUE 16
LED Lighting
Building
Wash 108P
BW - 108P AW
BW - 108P RGBA
Building Wash 108P is a heavy duty and powerful LED projector based on 108 high powered LED’s. Available in RGBA or Amber White
combinations, and two beam angle variations.
DMX Channels:
BW-108P AW: 2/2 Ch.
BW- 108P RBGA: 7/5/4 Ch.
·Waterproof LED touch control panel with password protection
·Built-in programs (16 Chases) and 3 editable chases
·IP 66 housing, suitable for a wide range of exterior or interior applications.
·Completely silent, the projector is cooled by natural air convection (not fan)
·400Hz LED refresh rate makes BW-108P also suitable for TV Studios
·The heavy duty aluminium housing with bracket, for floor mounting or hanging
10
15
1391
447
156.8
25°
5600
1740
845
242
89.3
45°
4020
1135
532
153.7
71.3
15°
850
302
142
39
14.8
25°
608
189
87
21.2
11.3
45°
407
121
57
14
7.1
15°
5200
1820
911
265
97
25°
3620
1120
548
148.5
61.8
45°
2660
750
350
96.6
43.2
15°
2050
720
356
137.2
52
25°
1710
520
257
60.6
30.8
45°
1036
293
137
50.4
22.8
WHITE
BLUE
GREEN
RED
lux
6
2840
lux
4
8240
lux
2
15°
DISTANCE M
8
AC 240V 50Hz
BW-108: 150W
BW-108P AW: 108 x 1 W LEDs, Amber 36, Cool White: 72
BW-108P RGBA: 108 x 1W LEDs, Amber 27, R27, G27, B27
25° or 30° x 65°
582 x 325 x 251 mm
18.4kgs
15º
lux
Power Supply: Power Consumption: LED: Beam Angle: Size: Weight: 0
2.0
4.0
6.0
10.0
25º 45º
5.74m
3.25m
1.96m
0m( )
1.96m
3.25m
5.74m
15.0
LED Lighting
The ColorFusion 805 is a RGB Pixel LED effect incorporating 384 5mm RGB LEDs.
DMX 512 control (6, 9, 15, 24, 27, Channel). Switchable between DMX control & automatic stand
alone mode. Built in effect macros for instant shows.
Speed settings of fade times on built in shows are adjustable. Sound sensitivity adjustment
available in stand alone mode.
Electrical:
LED
Effects:
Control
Size: Weight: Color: ISSUE 16
Color
Fusion
ICF-805
Voltage: 240V ~ 50Hz
Rated Power: 40W
Total LED: R-128, G-128, B-128
Beam Angle: 40°
RGB Mixing/Auto-programs/Custom programs/All effects and programs activated by DMX/4 LED Zones, can change separately
DMX512/Automatic Stand alone/Slave
965x64x152.5mm
2.5Kg
Black
Specification:
Power Supply: 240v ~ 50Hz
Power Consumption: 18W
LED/Unit: 192
(R: 64 G: 64 B: 64)
Size: 315.4 x 181 x 114.7mm
Weight: 2.1kg
LED Strobe
RGB
ILED-192RGB
The LED Strobe RGB is a LED strobe that combines the latest color mixing technology
with great built in programs.
• Fitted with 192 high output LEDs to offer powerful full color output.
• 4 DMX channels: R, G, B, Dimmer/Strobe
• 3 operational modes: DMX control, Sound Activation, Master /Slave
• Built in programs under Master/Slave triggered by sound
• Full range dimming and variable strobe speeds
• Optional CA-8 controller
• 4 Digit LED navigation panel
Specification:
Power Supply: 240v ~ 50Hz
Power Consumption: 20W
LED/Unit: 192 White LEDs
Size: 315.4 x 181 x 114.7mm
Weight: 2.1kg
LED Strobe
WHITE
ILED-192W
The LED Strobe White is a LED strobe that combines the latest color mixing technology with great
built in programs.
• Fitted with 192 high output white LEDs to offer powerful full color output.
• 1 DMX channels: Dimmer/Strobe
• 3 operational modes: DMX control, Sound Activation, Master /Slave
• Built in programs under Master/Slave triggered by sound
• Full range dimming and variable strobe speeds
• Optional CA-8 controller
• 4 Digit LED navigation panel
9
PRO
ISSUE 16
LED Lighting
Splender
90
ILED-CM-90 AW
ILED-CM-90 RGBW
The Splender 90 is a lightweight, compact wash light producing brilliant powerful colors.
Splender 90 consists of 90 pcs of 3W LED. Excellent color mixing, durable design, perfect for
stage wash applications where real lighting punch is required.
WHITE
Electrical:
LED:
Effects:
Control:
Size: Weight: Color: RGBW
Electrical:
Voltage: 240V ~ 50Hz
Rated Power: 300W
LED:
Total LED: 90 x 3W LEDs, Amber 30,CW60
50, 000 hrs rated lifespan
Beam Angle: 15°/25°
Effects:
RGB Mixing/Auto-programs/Custom programs/All effects and programs activated by DMX
Control:
DMX512/LCD Display Panel/Automatic Stand alone/Slave
Size: 335x227x386mm
Weight: 10Kg
Color: Black
Stage
Wash 54
IL-05182
Compact and high performance LED based moving wash light. Features 54 Luxeon K2 LEDs,
electronic strobe, electronic dimmer, easy setup via LCD display panel and more...
Electrical:
LED:
Effects:
Control:
Pan/Tilt:
Size: Weight: Color: 10
Voltage: 240V ~ 50Hz
Rated Power: 280W
Total LED: 54 pcs - (14R x 2W, 14G x 3W, 14B x 3W, 12W x 3W)
Beam Angle: 15°/30°
RGB color mixing/Auto-programs/Custom programs/
Strobe/Dimmer/Fan Speed control
Auto color sequence (variable speed)
All effects and programs activated by DMX
DMX512/LCD Display Panel/Automatic
Stand alone/Slave
Pan: 540° Tilt: 250°
Pan/Tilt speed
Pan/Tilt Blackout
390x320x385mm
16.8Kg
Black
Voltage: 240V ~ 50Hz
Rated Power: 300W
Total LED: 90 x 3W LEDs, R 18, G 24, B 24, W 24
50, 000 hrs rated lifespan
Beam Angle: 25°
RGB Mixing/Auto-programs/Custom programs/All effects and programs activated by DMX
DMX512/LCD Display Panel/AutomaticStand alone/Slave
335x227x386mm
10Kg
Black
LED Effects
ISSUE 16
LED logo
Projector
20W
ILED-LGP-20CRL
• 240V - 50Hz
• Gobo - E Size
• Light Source - LED 20W
• Color Temperature - 7000K
• LED lifespan - 30000 hrs (Avg)
With high output 20W LED,
3 gobo rotation speeds in either clock-wise or anticlockwise direction plus gobo flash function this
attractive logo projector is sure to be a head turner.
Accepts any E Size gobo or image.
LED logo
Projector
45W SL
ILED-LGP-45SL
• 240V - 50Hz
• Gobo - E Size
• Light Source - LED 45W
• Color Temperature - 7000K
• LED lifespan - 30000 hrs (Avg)
• Slide Size - 2.5 “/2 “
Very High output 45W LED,
3 gobo rotation speeds in either clock-wise or anti-clockwise direction plus gobo flash
function this logo projector will get the message across. Accepts any E Size gobo or image.
LED logo
Projector
20W IP
ILED-LGP-45IPL
• 240V - 50Hz
• Gobo - E Size
• Light Source - LED45W
• Color Temperature - 7000K
• LED lifespan - 30000 hrs (Avg)
• IP54
For outdoor image projection applications this very High output 45W LED has
3 gobo rotation speeds in either clock-wise or anti-clockwise direction plus gobo flash
function. This logo projector is a new way for displaying a message, theme or image.
Accepts any E Size gobo or image.
11
PRO
ISSUE 16
LED Effects
Radiant
LED
ILED-340B
- Featuring the 1 x 10W Tri-color high powered LED and specially designed mechanism, the radiant LED shoots tons of powerful and laser-like multi color beams, covering an entire room with amazing effects.
- 3 DMX Channels: dimmer/strobe, color, rotation
- 3 control modes: DMX, Master /Slave, and sound Active
- Great built-in lighting shows under Master/Slave operation triggered by music
- Full range dimmer and variable strobe effects
- Optional CA-8 easy controller for instant lighting shows at your fingertips
- LED display for easy navigation
Power Supply:
Power Consumption:
LED:
Size: Weight: 240V - 50Hz
26W
1 x 10W Tri-color LED, 30,000 hrs rated (Avg)
302x236x212mm
4.8 Kg
Rage LED
ILED-3084
- Featuring the 2 x 10W Tri-color, the DMX Rage LED will fill an entire room with powerful and laser-like multicolor beams, creating great effects
- 3 DMX Channels: dimmer/strobe, color, rotation
- 3 control modes: DMX, Master /Slave, and sound Active
- Great built-in lighting shows under Master/Slave operation triggered by music
- Full range dimmer and variable strobe effects
- Optional CA-8 easy controller for instant lighting shows at your fingertips
- LED display for easy navigation
Power Supply:
Power Consumption:
LED:
Size: Weight: 12
240V - 50Hz
39W
2 x 10W Tri-color LED, 30,000 hrs rated (Avg)
269x271x140mm
4.1 Kg
LED Effects
ISSUE 16
Matrix LED
ILED-7871
- Featuring 256 high bright LEDs. Each LED is individually controllable, the matrix LED delivers great text patterns, geometric figures, dynamic scanning, rolling, rotating and Zooming effects.
- DMX 8 and 256 channels selectable :
8-ch Mode: Strobe, character/logo/macro, color, rotate, pattern direction horizontal, pattern direction vertical, zoom 256-ch. mode: individual LED control
- 3 operational modes: DMX, Master /Slave, and sound Active
- Great built-in lighting shows under Master/Slave operation triggered by music
- Optional CA-8 easy controller for instant lighting shows at your fingertips
- LED display for easy navigation
Power Supply:
Power Consumption:
LED:
Size: Weight: 240V - 50Hz
36W
R64, G64, B64, W64 - (Total - 256pcs)
242x270x215mm
4.0 Kg
Matrix 4
LED
ILED-7874
- The Matrix LED features 4 high brightness red, green, blue and white LED
clusters, creating great text patterns, geometric figures, dynamic scanning,
rolling and rotating effects.
- DMX 8 and 256 channels selectable :
8-ch Mode: Strobe, character/logo/macro, color, rotate, pattern direction horizontal, pattern direction vertical, zoom 256-ch. mode: individual LED control
- 3 operational modes: DMX, Master /Slave, and sound Active
- Great built-in lighting shows under Master/Slave operation triggered by music
- Optional CA-8 easy controller for instant lighting shows at your fingertips
- LED display for easy navigation
Power Supply:
Power Consumption:
LED:
Size: Weight: 240V - 50Hz
35W
R64, G64, B64, W64 - (Total - 256pcs)
971x217x121mm
6.0 Kg
13
PRO
ISSUE 16
LED Effects
StyLED
ILED-7474
- Featuring 4 LED clusters & great programs, StyLED rocks the crowds with its dynamic scanning effects and powerful beams
- DMX 6 - Channel: chase, strobe, red, green, blue, dimmer
- 3 control modes: DMX, Master /Slave, and sound Active
- Great built-in lighting shows under Master/Slave operation triggered by music
- Low heat, low power consumption
- DIP-switch for setting DMX address
Power Supply:
Power Consumption:
LED:
Size: Weight: 240V - 50Hz
11W
R96, G96, B64 (Total 256) rated 100,000hrs (Avg)
965x190x82mm
6 Kg
LED
Centrelight
ILED-CTL-6
- The LED Centrelight is lightweight and compact in size. It features the latest LED technology, with 6 x 3W Tri-color LEDs, power output is similar to a discharge lamp visually, delivering ultra smooth, dynamic movements and powerful outputs.
- 4 DMX channels: movement, movement speed, colour macro, colour macro speed
- 12pcs stepping motors drive 12 reflectors, each reflector can turn from 0-180˚
- 3 control modes: DMX, Master /Slave, and sound Active
- Great built-in lighting shows under Master/Slave operation triggered by music
- Optional CA-8 easy controller (sold separately) in Master/Slave operation with 3 different functions
- Easy installation on ceilings by strong hanging bracket
- Fan cooled & big heat-sink for excellent ventilation
Power Supply:
Bulb:
Size: Weight: 14
240V - 50Hz
6 x LED 3W Tri-Color, 50,000 hrs rated (Avg)
414x478x152mm
10.4 Kg
LED Effects
InvincibLED
10W
ILED-767-10W
ISSUE 16
SPECIFICATION:
Power supply: 240V~50Hz
Power consumption: 23W
Bulb: 10W RGB LED (3in1) 30,000 hrs rated (Avg)
Size: 172 x 215 x 195mm
Weight: 3.3kg
InvincibLED is a powerful LED effect featuring the latest 10W RGB LED technology, with specially
designed rotating discs to deliver sharp, high output effects.
• 3 DMX channels: Dimmer/Strobe, Color, Rotation
• Great built-in lighting shows under Master/Slave and Sound Activation
• Full range dimmer and variable strobe effects
• Optional CA-8 controller
• DIP-switch for DMX addressing
• Big heat sink for excellent ventilation to extend LED life
• Ideal for discos, night clubs, bars, parties and other events
MarveLED
ILED-737
Specification:
Power supply: 240V ~ 50Hz
LED: R: 36 G: 36 B: 36 W:36
Size: 270x240x213mm
Weight: 4.2kg
Marvelous DMX controlled LED moonflower effect. This unit operates via
Sound Activation or via DMX. Occupies 4 DMX channels and features sharp
red, green, blue and white beams.
• A wide beam angle of 400 enables this effect to cover a large area.
• Great built in lighting shows under master/slave mode triggered by music
• 3 operation modes: DMX, Master/Slave, and Sound Activation
• Optional CA-8 controller for enjoying instant lighting shows at your fingertips
• Strobe and 0-100% dimming functions
• LED operational display and additional IEC power output for linking other units together in a daisy chain
• Advanced LED technology. Long lifespan LEDs (rated average 100,000hrs)
• Low heat, low power consumption, no duty cycle, runs all night
• Ideal for discos, clubs, pubs, parties and mobile DJ’s
ImpossibLED
ILED-777
Specification:
Power supply: 240V ~ 50Hz
LED: R: 140 G: 105 B: 84 W: 63
Size: 250x250x280mm
Weight: 5kg
The ImpossibLED is a high powered LED effect light creating a splendid and eye
catching moon flower effect. This unit operates under Sound Activation or DMX
control. Occupying 10 DMX channels with bright Red, Green, Blue and White beams.
• Specifically designed 7 LED clusters, with wide beam angle (54˚), covers a large area.
• Impressive built in lighting shows under Master/Slave mode which are triggered by music.
• 3 operation modes: DMX, Master/Slave, and Sound Activation.
• Optional CA-8 easy controller for enjoying instant lighting shows at your fingertips.
• Strobe and 0-100% dimming functions.
• Additional IEC power output for linking multiple units together in a daisy chain format.
• Advanced LED technology. Long lifespan LEDs (rated average 100,000hrs) – no need to change lamp.
• Low heat, low power consumption, no duty cycle, runs all night.
• Ideal for discos, clubs, pubs, parties and mobile DJ’s.
15
ISSUE 16
LED
LED Jive
Jive
ILED-245-II
LED Effects
Power Supply: 240V~50Hz
Power Consumption: 17W
LEDs: R32, G30, B30
Size: 244 x 278 x 154mm
Weight: 3.12kgs
• Dual rotating moonflower effect
• LED dual lens effects with sharp red, green and blue high output color beams
• Wide beam spread that covers a large area
• Sound active with built in programs
• High output with new superior optical system
• Very low power consumption, no duty cycle
SuperNova
SuperNova
White
RGB
ILED-920D
ILED-920D RGB
The SuperNova utilizes a single 3 Watt high powered
LED as its light source, producing laser like powerful
beams of light.
• Unit occupies 2 DMX channels in DMX mode
• Built in lighting shows triggered by music, when
operating in Sound Activation mode
• 3 Operation Modes: DMX, Master/Slave, and
Sound Activation
• Optional CA8 controller for instant lighting shows
• Advanced LED technology creating powerful light
output comparable to a discharge lamp
• Low heat, low power consumption, no duty cycle
for continuous operation
The SuperNova RGB is in an innovative edition to the
SuperNova range. Utilising a 3W Tri-Color LED as its light
source, the SuperNova RGB produces full color , laser like
beams of light.
• 3 DMX channel: Dimmer/Strobe, Color, Rotation
• Fabulous built-in lighting shows triggered by music
• 3 Operation Modes: DMX, Master/Slave, Sound Activation
• Optional CA-8 controller for enjoying instant lighting shows at your fingertips
• Long lifespan LEDs, no need to change lamp
• Low power consumption, no duty cycle, runs all night
Astro
RGB: ILED-256D-RGB
WHITE: ILED-256D
Specification:
Power Supply: 240V ~ 50Hz
LED: 1 x 3W LED
Size: 205.5x141x127mm
Weight: 1Kg
RGB SPECIFICATION:
Power Supply: 240V~50Hz
LEDs: 1 x 3W (3 in 1) Full Color
Size: 210 x 210 x 178.5mm
Weight: 1.8kgs
The Astro is an innovative DMX LED star ball with 34 clear
lenses to project 34 sharp beams on the dance floor creating a
mirrorball like effect.
• 3 DMX channels: Dimmer/Strobe, Color, Rotation
• Great built-in lighting shows triggered by music
• 3 operation modes: DMX, Master/Slave, and Sound
Activation
• Rotation speed and strobe speed adjustable via dip switch
• Employs RGB color mixing technology with creative design
• No need to change lamp, no maintenance cost
• Low heat, low power consumption, no duty cycle
• With unique features ideal for discos, clubs, pubs, parties, and mobile DJ’s.
16
WHITE SPECIFICATION:
Power Supply: 240V~50Hz
LEDs: 1 x 3W White
Size: 210 x 210 x 178.5mm
Weight: 1.8kgs
Specification:
Power Supply: 240V ~ 50Hz
LED: 1 x 3W Tri-Color LED
Size: 194 x 202 x 141mm
Weight: 2.0kg
LED Effects
ISSUE 16
LED Drape
IL-06950 RGB
RGB LED star effect theatrical curtain.
Designed for all applications from theming to production.
6x4m black drape. Fire retardant,
Total of 128 LED’s per drape.
Features include- Control via DMX512 system controller
required. Allows the units to be controlled from any DMX512
controller. Powerful internal programs and simple to program
user-programs allows this product to meet the needs of a
variety of lighting projects and events.
Specification:
Electrical Voltage: 7.5V ( via LED drape controller)
Power 60W
Effects RGB colour mixing, Strobe, Dimmer, Auto-programs, Custom-programs
LEDpower RGB 0.2W
LED/Drape 128pcs
Avg LED Life span 30 000-50 000 hrs.
OP Mode
DMX512 (10/24CHS)
Dimensions
Size - 6000x 4000x 50mm
Weight - 18Kg
Colour - Black
IL-06967
LED Drape Controller
Controller for up to 4 LED drapes (sold separately)
17
ISSUE 16
LED Effects
Flexi LED
??ILED-FLS
High Intensity, Wide viewing angle, Highly flexible, 30 LEDs per metre, supplied in 5 metre reels.
Can be cut or connected every five LEDs (140mm).
Electrical
LED
Effects
Control
DC 24V
Power Dissipation: 1.44W Per Meter
Input Current: 60mA
Operation Temperature: -20 - 60º
LEDs: 600LEDs per 5m length Dimmable by pulse modulation (PWM) with the electronic controller
Single Color - ILED-PSU-100-24
50W- ILED-HC-050
100W - ILED-HC-101
Applications
Dimensions
Channel letters, Indoor Decoration Lighting, Advertising Signs. Replacement for Neon, Ideal for indoor usage at bars, clubs, hotels, restaurants, casinos, etc. Outdoor usage options include - path & contour marking, illuminated, signs, walkways
Color
Available in Red, Yellow, Green, Blue, Cool White, Warm White.
Size: 5m per reel
Weight: 0.9 Kg per 5m
Color
Color
ICT-020
ICT-050
ICT-100
ICT-020S
ICT-050S
ICT-100S
Tube
Strip
The Color Tube is available in various tube lengths of 200, 300, 500
and 1000mm. It is rated at 100,000 hrs life span and has a beam
angle of 60° and 170°
Input: DC 24V
LEDs: high brightness LEDs
Colors: RGB - 200, 500, 1000mm | Blue - 300, 1000mm | Cool White - 300, 1000mm
Dimension: dia. 30 mm
Input: DC 24V
LEDs: high brightness LEDs
Colors: RGB - 200, 500, 1000mm
Dimension: dia. 30 mm
Control with LED PC 100 or LED PC 300
18
ICT 20
ICT 20S
ICT 30
ICT 50
ICT 50S
ICT 100
ICT 100S
Consumption
3W
4W
5W
10W
LEDs
24
42
72
144
LED Controllers
Power
Commander
100
Power
Commander
300
ILED-PC100
ILED-PC300
- Power supply for ColorTube or ColorStrip
- Can be controlled by DMX controller
- Stand Alone or Master/ Slave operation with built in lighting programs
- DIP switch for DMX address and built in program setting
- Maximum 10m of LED tube/strip
- 100W
- 240V - 50Hz
- Power supply for ColorTube or ColorStrip
- Can be controlled by DMX controller
- Stand Alone or Master/ Slave operation with built in lighting programs
- DIP switch for DMX address and built in program setting
- Maximum 30m of LED tube/strip
- 300W
- 240V - 50Hz
Remote
Commander
ILED-RC
- Features remote control ability
- Choose color, chase and fade options via buttons on controller
- Sound activation available
- for use with LED Parcan and LED Colortube
LED Power input: DC 12 V
HandiCon 101 Size: 83.8 x 83.4 x 40mm
LED
HandiCon 50
ILED-HC-101 (100w)
ILED-HC-050 (50w)
- Switch power supply inside
- Controlled by any universal DMX controller
- Built in programs under master/slave mode triggered by music
- Terminals for LED-wall dimmer, provides power to wall dimmer
- Switch power supply inside
- Controlled by any universal DMX controller
- Built in programs under master/slave mode triggered by music
- Terminals for LED-wall dimmer, provides power to wall dimmer
Power Input - 240V-50Hz
Power Output - DC 24V 50W MAX
Size - 296 x 70 x 40mm
Weight - 1kg
Power Input - 240V-50Hz
Power Output - DC 24V 100W MAX
Size - 356 x 132 x 49mm
Weight - 1.8 kg
Installer only product
Installer only product
ISSUE 16
Weight: 0.5kg
LED Wall
Dimmer
ILED-WD
A user friendly controller, it features standard size of
wall recessed switch box, perfect for mood creation in
households, hotels, restaurants etc.
·4 Channels (R, G, B, Dimmer) DMX output, can control
one group of 4-Channel LED lighting fixtures
·One knob of Fade/Colour selection, while the other
knob for adjusting Speed/Dimmer
·Buttons (M1 & M2), each button can save one scene
for instant lighting effects
·Standby Button for blackout
19
ISSUE 16
Intelligent Lighting
NEW
RANGE
Spot & Beam 300
iMove200SR
IM-200SR-HID
20
Specification:
Power supply: AC 240V~50Hz
Bulb: HID 150W
Size: 276x266x396mm
Weight 11.5kg(HID)
Inner View
Control:
• DMX 512 control channels: 8
• Setting and addressing: 4 digit LCD display with ON/OFF
setting functions
• Data in/out: Locking 3-pin XLR
iSolution operation:
• Consistent DMX configuration enables iMove to be linked
with iRock and iShow
• Remote DMX addressing (RDA): DMX address can be set
With its compact, stylish and excellent
by iLead controller,
optics, the single yoked IM-200SR is a perfect • remotely
Switch to Master/Slave mode automatically when DMX
lighting choice for discos, clubs, bars and
signal is off
entertainment venues. The 8 Ch. Moving
• Easy installation/addressing/operation
spot features 11 dichroic colors, 8 rotating,
Pre-programmed function:
interchangeable gobos, remote lamp on/off • Automatic switching between sound activation
control, and automatic pan/tilt position
and auto mode
correction. Also features a user friendly LED
• Master/Slave mode:
control panel, a switch-selectable power
i) No need to designate which unit is the master or slave,
supply & great built-in programs. The
the first unit is always the master unit;
ii) Built-in dynamic lighting shows for instant operation
DMX address can be set remotely by iLead
• CA-8 Controller: Enjoy a vast range of lighting shows
controller. All of these features make the
moving spot a stand out from its closest rivals. at your fingertips. (Sold Separately)
Rotating
Gobos
Pan/Tilt
• Pan: 540o; Tilt: 270o
Gobo wheel:
• 8 rotating interchangeable gobos plus white with
gobo shaking effect
Color Wheel:
• 11 trapezoid dichroic colors plus white with rainbow
effect in both directions
Dimmer/Shutter:
• 0 – 100 % dimmer
• Independent shutter/variable speed strobe
Optical System:
• Beam angle: 14°
Construction:
• Stylish composite housing
• Ultra-smooth, micro-stepping motors
Intelligent Lighting
Control
• DMX512 control channels: 16 or 8 channels mode selectable, via iLead controller or any DMX controller (sold separately)
• Remote lamp on/off control (16 channel mode only)
• Thermal sensor to control the lamp ignition ensuring lamp is ignited at proper temp.
• Setting and addressing: via 4 digit blue LED display
• Display can be suppressed with on/off setting function
• Data in/out Connections: Locking 3-pin XLR
iSolution Operation
• Consistent DMX configuration enables iMove to be
linked with iScan, iRock, and
iShow.
• DMX address can be set remotely from an iLead controller.
• There is no need to calculate the DMX channels of each fixture in the chain when using iLead controller.
• When the DMX signal is not present, the lights will automatically switch to Master/Slave mode.
• Easy installation, easy addressing, and easy operation
Dimmer/Shutter
iMove250S
Specification:
Power Supply: 240V~50Hz
Lamp: NSD250/2K (GY9.5 base)
Size: 428x371x466mm
Weight: 23kg
Rotating
Gobos
• 0-100% mechanical dimmer
• Independent shutter and variable speed strobe
Pan/Tilt
• Pan 5400; Tilt: 2700
• Pan/Tilt resolution: 16-bit (in 16 channel mode)
• Automatic Pan/Tilt correction
• Magnetic Pan/Tilt home positioning for easy calibration and easy maintenance
Pre-Programmed Functions
• Automatically switch between music trig or auto trig mode
• Master/Slave mode:
i.) No need to designate which unit is master or slave, the first unit in the chain will always act as the master unit
ii.) Built in lighting shows for instant operation
• User friendly CA-8 Controller (sold separately)
Gobo Wheel
• Rotating Gobo Wheel: 7 rotating, interchangeable gobos
• Gobo Wheels feature auto-home positioning for easy calibration and maintenance
IM-250S-MSD
• Gobo size: outside dia - 26.8mm; image dia. - 22 mm
• Gobo Shake Effect
Color Wheel
• 9 trapezoidal dichroic colors plus white
• Bi -directional rainbow effect
• Color wheel features auto-home
positioning for easy calibration and maintenance
Optics
• High efficiency optical system
• High quality optical lens and dichroic colors
• Beam angle :130
Construction
• Stylish composite housing
• Ultra-smooth, micro-stepping motors
• Integral carry handles
• Easy rigging system
Effect Wheel
• Prism
• Rotating Prism
Focus
• Remote focus by DMX
Specification:
Power supply: AC 240V ~ 50Hz
Lamp: NSD250/2K (GY9.5 base)
Size : 360x397x503mm
Weight: 27kg (240V )
Control
• DMX 512 control channels : 16 or 8 channel user
selectable modes
• Custom-designed iLead controller or by any universal
DMX controller (sold separately).
• Setting and addressing : 4 digit blue LED display
• LED display with on/off setting function
• Data in/out : Locking 3-pin XLR
iSolution Operation
• Consistent DMX configuration enables iMove to be linked with iRock and iShow
• DMX address can be set remotely from the iLead controller
There is no need to calculate the DMX channels of each fixture in the chain
• When there is no DMX signal, the lights will switch to Master/Slave mode automatically
• Easy installation, easy addressing, and easy operation
ISSUE 16
Pre-Programmed Function
• Automatically switch between music trig or auto trig mode
• Master/ Slave mode :
i.) No need to designate which unit is master or slave, the first unit in the chain will always act as the master unit
ii.) Built in dynamic lighting shows for instant operation
Pan/Tilt
• Pan: 540°; Tilt: 270°
• Automatic Pan/Tilt correction
CMY Color Mixing System
• Cyan: 0 ~ 100%, Magenta: 0 ~ 100%, Yellow: 0 ~ 100%
Color Wheel
• 6 trapezoidal dichroic colors plus white
• Rainbow effect in both directions
Dimmer Shutter
• 0 ~ 100% dimmer
• Independent shutter/ variable speed strobe
iMove250W
IM-250W-MSD
Optics
• High efficiency optical system
• High quality optical lens and dichroic colors
• Manually adjustable beam angle : 16° ~ 26°
Construction
• Stylish composite housing
• With ultra-smooth, micro-stepping motors
• Carrying handle, and specially designed rigging system
21
PRO
ISSUE 16
Intelligent Lighting
XPERIOR
Spot 300
Zoom
IXP-300SZ
Specification:
Power supply: AC 240V ~ 50Hz
Lamp: MSD 300 Mini FastFit
Size: 427x369x597 mm
Weight: 22 Kg
The light and compact Xperior 300 Spot comes with the latest technology in
optics and the specially designed modular, including CMY + CTO color mixing
systems, a color wheel with dichroic filters, 1 rotating gobo wheel with 7
interchangeable gobos, iris, frost, a rotating 3-facet prism and a linear zoom
with a range from 15° - 35. The full package of effects and colors fulfills the
demands for touring, rental, theatre, clubs, etc.
Construction
• Stylish design with fire retardant plastic housing
• Module design for easy maintenance and fast service
• Fixation option: Pan/Tilt lock mechanism
• Fastening System: 2x Omega Clamps
• Excellent ventilation, ensuring reliable operation
Control
• DMX 512 control channels: 22/22/29 channels ( 3 modes )
• Remote lamp on/off control, and lamp power save mode while black-out
• Thermal sensor monitors the lamp ignition and ensures its working at the
correct temperature
• Setting and addressing: blue/white LCD graphic display for easy navigation
• Data In/Out: Locking 3-pin & 5-pin XLR
Pan/Tilt
• Pan - 240º
• Tilt - 270º
• Pan/Tilt resolution: 8-bit or 16-bit
• Automatic Pan/Tilt position correction
• Easy calibration and maintenance by magnetic home positioning
XPERIOR
Beam 300
IXP-300B
Gobo1 (static gobos)
Gobo2 (glass, rotating gobos)
Additional gobos
Specification:
Power supply: AC 240V ~ 50Hz
Lamp: MSD 300 Mini FastFit
Size: 437x369x604 mm
Weight: 20 Kg
Featuring a superior package of CMY color mixing, rotating gobo wheel, color
wheel, rotating prism and frost. The compact and punchy Xperior 300 beam
offers the best price-performance ratio, ideal for a wide range of applications.
With its very powerful, bright “searchlight-like beam, it rocks all the venues
with amazing effects.
Construction
• Stylish design with fire retardant plastic housing
• Module design for easy maintenance and fast service
• Fixation option: Pan/Tilt lock mechanism
• Fastening System: 2x Omega Clamps
• Excellent ventilation, ensuring reliable operation
Control
• DMX 512 control channels: 18/18/25 channels ( 3 modes )
• Remote lamp on/off control, and lamp power save mode while black-out
• Thermal sensor monitors the lamp ignition and ensures its working at the
correct temperature
• Setting and addressing: blue/white LCD graphic display for easy navigation
• Data In/Out: Locking 3-pin & 5-pin XLR
Pan/Tilt
• Pan - 540º
• Tilt - 270º
• Pan/Tilt resolution: 8-bit or 16-bit
• Automatic Pan/Tilt position correction
• Easy calibration and maintenance by magnetic home positioning
22
Gobos
Intelligent Lighting
Dimmer/Shutter
Scanner
• 0-100% dimmer
• Independent strobe and variable speed strobe
IRock 575
IR-575-MSR
ISSUE 16
575
Optics System
• High efficiency optical system
• High quality optical lens, dichroics colors, and gobos
• Beam angle : 15°
iRock 575S is a new star of the iRock family. Excellent optical design achieves
superb high efficiency along with powerful output.
Control
• DMX 512 control channels: 8/14
• Controlled by customized iLead controllers or any universal DMX controllers
• Setting and addressing: 4 digit LED display with an on/off setting
• Data In/Out: 3-pin XLR
Construction
• Ultra-smooth, micro-stepping motors
• Accessory: bracket
Electrical and Specification
• Power Supply: AC 240V - 50Hz
• Size: 588 x 270 x 216mm
•Weight: 21Kgs
Pre-programmed function
• Automatic switching between music trigger or auto trigger mode.
• Master/Slave mode: i.) No need to designate which unit is master or slave, the
first unit in the chain will always act as the master unit. ii.) Built in dynamic
lighting shows for instant operation.
• Easy controller CA-8, enjoy many lighting shows at your fingertips
Pan/Tilt
• Pan: 180°
• Tilt: 70°
Gobo Wheel
• 5 rotating interchangeable gobos plus open
• Magnetic position for continuous rotating
• shaking effect
Color Wheel
• 6 colors plus white
• with rainbow effect
Dynamo250
DynaRock
IMH-635S-ELC
IMH-635B-ELC
Order Code
BX-AB-ELC5
Length
385mm
Avg Life (Hours)
500
Width
170mm
Replacement Lamp Options:
Manufacturer
XenPow
Height
122mm
Dimensions/Weight:
Weight
3.8kgs
•
•
•
•
•
DMX 4 Ch. Intelligent lights with flat mirror (IMH-635S-ELC) and multi faceted barrel reflector (IMH-635B-ELC).
Pan: 150°; Tilt: 70°.
10 Gobos plus open and blackout on the Gobo/Color Wheel.
Gobo shaking effect, strobe & rainbow effects with variable speed.
Great built-in programs in master/slave mode triggered by music.
•
•
•
•
Units automatically switch to master/slave mode when DMX signal is
not present.
Optional CA-8 Easy Controller: (ICA-8)
Electronic transformer, focus adjustable and easy lamp access door.
Fan cooled, featuring an added thermal switch for overheat protection.
23
PRO
ISSUE 16
Stage & Studio
Power supply: AC 240V ~ 50Hz
Power Consumption: TS-500 514W | TS-1000 1024W
Lamp: TS-500 (T25) 500W
TS-1000 (T19) 1000W
Size: 337 x 202 x 292 mm
Weight: TS-500 4.0kgs
5.2kgs (with barn door)
TS-1000 5.4kgs
7.0kgs ( with barn door)
Theatre
Spot
TS-0500
TS-1000
Features and Benefits
• Fresnel lens for wide spot coverage. Beam angle adjustable from 11˚ to 66˚
• Protective lens mesh
Structure
• Long body ensures an excellent ventilation
• Adjustable mounting bracket included for easy installation
• Barn door and safety cable (all sold separately) are available
iColor4
iColor3000
IC-4
IC-3000
Used with
CA32 Controller
•
•
DMX 4 channels: Color, Chase, Speed and Dimmer
Great pre-programmed lighting shows under Master/Slave linkage
triggered by music, giving an amazing performance,
including 32 preset colors and a variety of chase patterns
• Optional CA-8 Easy Controller or CA-8F Foot Controller for immediate,
exciting lighting shows
• Fan cooled with a yoke/floor bracket
24
Power supply: AC 240V ~ 50Hz
Lamp: J type 500W x 4 240V
included (BX-J500)
Size: 450 x 270 x 175 mm
Weight: 7.0 kgs
• A powerful, professional color mixer comes
with red, green and blue heat-resistant dichroic lenses
• Two DMX control options:
i.) 4 channels- Color, Chase, Speed, and Dimmer, can be controlled by CA-32 Colormix/ CA-32F Colormix foot controller or universal DMX controller
ii.) 3 channels - Red, Green, Blue color mixing controlled by universal DMX controller
• With 32 preset colors and various chase patterns
• Great pre-programmed lighting shows under Master/Slave linkage triggered by music, giving the best performance
• Fan cooled, and standable bracket
• Integral user friendly LED control panel for easy operation
• Easy Controller / foot controller CA-8 / CA-8F in Master/ Slave mode for immediate, different lighting shows
Power supply: AC / 240V ~ 50Hz
Lamp : J type 800W x 3 for 230V
included (BP-13477R)
Size : 285 x 295 x 460 mm
Weight: 7.0 kgs
Stage & Studio
UVgun400
ISSUE 16
75WStrobe
IUV400
IE75B
Powerful 400W UV projector with wide
dispersion angle. UVgun400 is fitted with an aluminum reflector
and integral ballast. There is easy lamp replacement access from the front,
via the removable lens protection mesh.
Lamp is included.
Replacement Lamp:
400W UV (BX-XPW-400)
The standard in 75W strobes.
Variable speed flash (1-12 fps).
Features Xenon Helical lamp, 1/4inch Jack,
on board flash speed control.
Optional remote control via Strobe Ignitor (IBF-04D)
Replacement Lamp: BX-PX-75
GigaStrobe
DMX
iLaser
0505G
IBF-1500ND
ILS-505G
1500W 2 channel DMX controlled strobe.
4 – 8 strobes can be linked in master slave mode.
Operate with pre programmed show, when multiple strobes are connected.
Thermal cut out switch for overheat protection.
Optional remote control via Strobe Ignitor (IBF-04D)
Replacement Lamp: BX-PX-1500
240V - 50Hz
Size: 448 x 126 x115mm
Weight: 4.4 kg
[AUD] $299 [NZD] $352
Control
• DMX 512 control channels: 5
• Via iLead controller or universal DMX
controllers (sold separately)
• Setting and addressing: 4 digit blue LED
display
• LED display with on/off setting function
• Data in/out: Locking 3-pin XLR
iSolution Operation
• DMX address can be set remotely
by iLead controller. • When the DMX signal is off,
the lights will switch to
Master/Slave mode automatically
• Easy installation, easy addressing,
and easy operation
Power supply: 240V ~ 50Hz
Laser Power: Green 5mW
Size : 320 x 205 x 100 mm
Weight: 2.3 kgs
May not available in some states.
Stobe
Ignitor
IBF-04D
Control both DMX and 0-10V strobes from
this unique controller. There are four 1/4” jack outputs for analogue strobes,
and a DMX output that can control a further 4 strobes (2 DMX channels
each)/Strobe Ignitor features ten built-in chase programs which can be triggered
automatically or via music trigger. There are controls for instant blackout,
momentary flash, as well as controls for flash speed and
flash intensity (for compatible DMX strobes).
*laser products for professional use only - use in accordance with standards.
25
PRO
ISSUE 16
Stage & Studio
iFollow 575
iFollow +Stand
IF-0575-MSR
10500
13000
Specification:
Power Supply: 240V ~ 50 Hz
Power Consumption: 575W
Magnetic ballast
Lamp: BX-NSD575
Size: 693 x 332 x 362mm
Weight: 23.0kg
5200
6800
3300 (LUX) 19º
4600 (LUX) 13º
13º 19º
0
5
7
9
Distance (m)
The compact iFollow 575 is a light weight and robust Follow Spot designed for TV Studio, Theatre and
Stage featuring Zoom, Focus, Iris, and CMY plus Blackout. The Follow Spot delivers clear sharp beams
to satisfy all your demands.
Iris
• Iris, and gobo projection (via gobo holder)
Effect Wheel
• Zoom, focus adjustable
• CMY color blades for color mixing
Focus
• Zoom, focus adjustable, and CMY for color mixing
• Zoom: 13º to 19° - 2 °to 19° (with iris)
iFollow 1000
iFollow + Stand
IF-1000-CP70
Optics
• High efficiency optical system for optimized output
Construction
• Robust housing with excellent heat ventilation
• 3 handles for easy operation
• Adjustable mounting brackets including for easy installation
• Overload protection and fan cooled
Specification:
Power Supply: 240V ~ 50Hz
Power Consumption: 1000W
Lamp: CP70
Size: 693 x 346 x 299mm
Weight: 12kg
2700
3600
The compact iFollow 1000 is a light weight robust follow spot designed for TV Studio, theatre and
stage featuring Zoom, Focus, Iris and CMYK and electronic dimmer. The Follow Spot delivers clear,
sharp beams to satisfy all your demands.
Control
Optics
• High efficiency optical system for optimized output
Iris
Optics
Controller
• Iris, and gobo projection (via gobo holder)
• High efficiency optical system for optimized Construction
output
• Robust housing with excellent heat ventilation
Iris
Effect Wheel
•• Iris,
andfocus
goboadjustable
projection (via gobo holder)
Zoom,
Construction • 3 handles for easy operation
• Adjustable
• CMYK color blades for color mixing
• Aluminium housing with
excellentmounting
heat brackets including for easy installation
• Overload protection and fan cooled
Effect Wheel
ventilation
•Dimmer/Shutter
Zoom, focus adjustable, and CMY for color mixing • 3 handles for easy operation
• 5600K color temperature filter
• Adjustable mounting brackets including for Dimmer/Shutter
• Electronic dimmer
easy installation
• Overload protection and fan cooled
Focus
Focus
•• Zoom,
focus
adjustable,
and
CMY
for
color
mixing
Zoom, focus adjustable, and CMY for color • mixing
Zoom: 13º to 19°
• 2
Zoom: 13º°toto19°
19°(with
- 2 °toiris)19° (with iris)
iFollow + Case + Stand:
IF-1200-MSR/FCST
Specification:
Power Supply: 240V~50Hz
Lamp: BX-HMQ1200/SGK
Incl.
Size: 1170x330x225mm
(Controller 405x360x35mm)
Weight: 44kg
Control
• DMX 512 control channels: 6
• Settings and addressing: 4 digit blue LED display.
LED display with on/off setting
• Data In/Out locking 5Pin XLR
Controller
• Professional 6 channel dedicated controller for followspot
• Equipment with 9 different hold-on color buttons for instant access to colors
• Slide controls for Shutter, Iris, Color, Color T
temperature, Dimmer and Focus
Iris
• Motorised iris for different beam diameters
Color Wheel
• 8 dichroic colors plus white
• Variable rainbow effect in both directions
26
Controller
Effect Wheel
• With color temperature filters
(3200K & 5600K), Combined with color wheel produces 27 color effects
Dimmer/Shutter
• 0-100% dimmer
• Independent Shutter with variable speed strobe control
Focus
• Automatic focus via dedicated DMX controller
Optics
• High efficiency optical system
• High quality optical lens and dichroic colors
• Beam Angle: 13˚
Construction
850 (LUX) 19º
1080 (LUX) 13º
13º 19º
0
iFollow 1200
1300
1800
• Stylish Housing
• Ultra-smooth microstepping motors
• Easy control handle for pointing & focusing
Road Case
5
7
9
Distance (m)
Stage & Studio
ISSUE 16
Safety
Wire
iColor
Stand
LC-SW01
ISPS-502
750mm stainless steel wire.
Stand for iColor or LED power bar.
Maximum height 400cm.
PushUp
Stand
Scanner
Coupler
ILTS-09
KU-KCP-838
Supports up to 30kg. Supplied with T-Bar.
Maximum height 3.5m (4ft).
(LIGHTS SOLD SEPARATELY.)
Heavy duty coupler for use on intelligent
lights.
Extruded aluminium construction,
suspend up to 200kg.
Exclusive Larger Handle For Easy Secure
Tightening.
Adjustable
Clamp
2” Hook
Clamp
IC-01
IN-00569 (Black)
IN-00576 (Silver)
Adjustable clamp, ideal for use
with Mobile Truss or Push-up
stand or tubes up to 1.5 inch.
H-Stand
IN-01566
Suitable for 50mm pipe or truss.
Industry Standard .
Mobile
Truss
ILTS-31
Floor stand for lights and
effects. 2” tube accepts
standard HookClamps for easy
professional use.
Comes with two push up
stands and a 3m truss.
Maximum capacity 40kg
Maximum height 2.7m
27
PRO
ISSUE 16
Effect Lights
Specification:
Power Supply:
240V~50Hz
Bulb: BX-AB-ELC
Size: 353x230x132 mm
Weight: 7.2kg
Water
Wave
IWT-WAV
A flowing water effect with a powerful 250W light output.
Ideal for background projection.
Equipped with two effect wheels and one independent dichroic color wheel.
Focus adjustable, fan cooled, and easy lamp access door.
Inferno
Specification:
Power Supply:
240V~50Hz
Bulb: BX-AB-ELC
Size: 353x230x132 mm
Weight: 7kg
IWT-IFO
This unique projector creates flame effects
simulating a blazing inferno.
A great effect that will set any venue “on fire”.
Focus adjustable and easy lamp access door.
Effect Lights
Hallucination
IWT-HLC
Featuring a slow rotating effects wheel which projects a beam onto a
multi-colored dichroic dish, to create a hallucinary effect.
Powerful 250W light output fills the venue with laser sharp beams.
Modes: Constant rotation, sound activation & static functions.
Order Code
BX-AB-ELC5
Length
270mm
Replacement Lamp Options:
Manufacturer
XenPow
Dimensions/Weight:
Height
Weight
120mm
5.3kg
Avg Life (Hours)
500
Width
192mm
Orbiter
IWT-0BT
Creating dynamic swiveling effects the Orbiter features a gobo
wheel and multi-colored dish which rotates back
and forth.
Excellent optics produce stunning and powerful beams.
Modes: Constant rotation, sound activation & static functions.
28
Order Code
BX-AB-ELC5
Length
270mm
Replacement Lamp Options:
Manufacturer
XenPow
Dimensions/Weight:
Height
Weight
120mm
5.3kg
Avg Life (Hours)
500
Width
192mm
Effect Lights
ISSUE 16
Gobo
Flower
IWT-GBF
A high output gobo flower effect which projects laser sharp beams
activated by music.
Twelve gobos /colors with high output optics.
Fan cooled with thermal switch for temperature protection.
Order Code
BX-AB-ELC5
Length
306mm
Replacement Lamp Options:
Manufacturer
XenPow
Dimensions/Weight:
Height
Weight
140mm
7.2kg
Avg Life (Hours)
500
Width
263mm
Kaleido
IWT-KLD
A unique, 250W kaleidoscopic effect that projects a swarm of swirling
patterns. Great built-in programs with auto movement or sound
activation. Link multiple Kaleido together (via mini-jack) for synchronised
light shows. Precise optics with high tech gobo/color wheel.
Focus adjustable and fan cooled.
Order Code
BX-AB-ELC5
Optional CA-8 Controller
Length
306mm
StormBird
IMH-130
IMH-270MT
Width
263mm
Specification:
Power supply:
240v~50Hz
Size: 340x320x135mm
Weight: 8.5 kgs
A creative, fabulous gobo flower with prism effect. Comes with
250W lamp, giving bright, laser-like beams. Equipped with gobo
wheel, inner reflector and three facet prism.
Sound Activation; plug and play; fan cooling and focus adjustable.
Tomahawk
Replacement Lamp Options:
Manufacturer
XenPow
Dimensions/Weight:
Height
Weight
140mm
8kg
Avg Life (Hours)
500
Replacement Lamp Options:
Order Code
Avg Life (Hours)
BX-AB-ELC5 500
Manufacturer
Xenpow
Replacement Lamp Options:
Order Code
Avg Life (Hours)
BX-AB-ELC5 500
Manufacturer
Xenpow
Specification:
Power supply:
240v~50Hz
Size: 380x205x120mm
Weight: 5.0 kgs
Popular moonflower effect with scan mirror, giving rich and
dynamic lighting effects. The quad-mirror projects beams over a
wide area. 18 gobos including 12 single color, 2 bi-color, 2 quad-color and 2 open white. Tomahawk is constructed with a
precision optical system to optimise output via the 100W EFP lamp.
There are settings for either sound activation or continuous rotation.
29
PRO
ISSUE 16
Smoke and Haze
HZ 500
IN-HZ-500
The HZ-500 is ideal for venues where silence is golden. Low Noise, below 70dB at 10cm distance.
Dry haze. Metal net and filter in the intake hole can prevent hazers from clogging problems.
Super low haze liquid consumption rate at 20 hours per liter.
Power: AC 240V – 50Hz • Output: 3000 cuft/min • Consumption rate - 20 hrs per litre
• Tank Capacity: 2.5 Litre • LCD Timer panel controller included • Compact flight case
included • Air Pressure 30Psi • Dimensions: 490 x 351 x 338mm • Weight: 31.5kg
RO-10030116
The HAZE 400 FT is Robe’s
professional hazer.
The machine is capable of producing very
large quantities of haze very quickly and quietly.
The specially designed air compressor is vibration free and virtually silent in
operation.
In addition, in-built onboard DMX makes full control of the HAZE 400 FT easy.
The HAZE 400 FT delivers a high volume of fine, translucent haze
into any environment and uses a mineral oil based haze liquid
RobeFaze
1000FT
RobeFog
1500FT
R0-10030118
R0-10030114
The versatile Robe Faze 1000 FT is equipped
with the most sophisticated features and new technology
including an aluminium cast heater, a very quiet pump, high precision PCB
design and controllable twin fans.
The new high efficiency heater technology ensures low fluid consumption of
less than one litre per two hours of continuous fogging (30% output).
The durable twin fans and the DMX Fog Control.
Remote ensures high precision output control.
The Robe Fog 1500 FT is the most
advanced machine available for the
professional performance market.
It’s streamlined, stylishly contoured body features a 100% pure aluminium
heater, a silent running pump and proprietary circuit design.
This highly efficient but powerful heater produces a clean,
dry, highly efficient fog output.
Circuitry is resistant to external power interference and so
guarantees thermal control stability.
IFOG 180
IFOG 280
IN-IF-180
IN-IF-280
The iFOG 180 is an economical
and professional fog machine that offers reliability and performance, making it
perfect for mobile DJ’s, parties, clubs, and home use.
The iFOG 280 is a medium fog machine with easy loosen and clean heater.
This machine has Eco Thermal Control to keep machine in ready-to-fog status and a new
design timer controller to specify the fog intervals for hands-free operation.
Power: AC 240V ~ 50Hz • Heater: 700W • Output: 2500 cuft/min
Warm up time: 4 min • Tank Capacity: 0.8 Litre
Remote Included: On/Off Remote
Dimensions: 330 x 160 x 130mm • Weight: 4.5kg
Power: AC 240V – 50Hz • Heater: 1000W • Output: 5000 cuft/min
Warm up time: 4.5 min • Tank Capacity: 1.3 Litre
Remote Included: Timer Remote
Dimensions: 385 x 180 x 150mm • Weight: 6kg
IFOG 320
SmokeHaze
Fluid
IN-IF-320
The iFOG 320 uses regular fog fluid to produce a translucent haze in a fazer effect.
The iFOG 320 produces constant output, variable volume and timer control for hands free
operation. Eco Thermal Control ensures the machine is always in ready-to-fog status and
‘No liquid/Auto Cut off’ makes this a very smart Fazer to operate.
Power: 240V – 50Hz • Heater: 700W • Output: 200 cuft/min
Warm up time: 4 min • Tank Capacity: 1.3 Litre
Remote Included: Timer Remote
Dimensions: 526 x 207 x 173 mm • Weight: 11kg
30
RobeHaze
400FT
CODE
IN-SF-05
IN-SF-25
LM-GMF05
LM-GMF25
AN-HZL-5
PRODUCT
Stage Formula Smoke Fld 5ltr
Stage Formula Smoke Fld 25ltr
Global Mix Smoke Fld 5ltr
Global Mix Smoke Fld 25ltr
Haze 400FT or HZ500 Fluid 5ltr Controllers
DMX
Manager
Exclusive
iColor Controller
ISSUE 16
3 Channel
Dimmer
CA32
ICA-32
ICA-M26
ICA-316
DMX Manger is a signal merger and splitter. It
features 2 DMX inputs and 6 DMX outputs. All inputs
and outputs are opto-electronically isolated to protect
the DMX console or any other output fixtures if one of
the outputs goes faulty.
3 Input Modes
HTP mode - The higher DMX value form input A or B will take the order
Backup mode - When one input without DMX signal, it will take the DMX signal from another input.
Merge Mode - Combine the DMX signal inputs together.
3 Output modes if there is no DMX input
Null - No DMX output
Hold - Keep the urrent DMX output
CLR - DMX output is 0
User friendly DMX 4 channel controller for color mix.
Equipped with nine different hold-color buttons for instant access
of colors.
Comes with 32 spectrum mix colors, color fade, and 12 different
chase patterns, providing the richest changing colors for the show.
DMX controlled 3-channel Dimmer unit with DMX input and output.
Standard 19” rack mountable.
Dip switch for DMX addressing. 3 LEDs on the front and rear panels
to monitor the working condition of each channel. Mains input :
15A circuit breaker for overload protection
Output: 5A circuit breaker per channel for each socket.
Speed and dimmer adjustable for both color fade and chase.
Sound activated function available.
Full on and blackout functions.
3 pin and 5 pin XLR in/outputs
Blue LED display for easy navigation
Power supply: Includes DC 9V 300mA Plugpack
Size: 210x140x46mm
Weight: 0.93kgs
Power supply: 240V – 50Hz
Size: 483 x 44.5 x 150mm
Weight: 3kgs
Power supply: 240V – 50Hz
Size: 482 x 105 x 88mm
Weight: 2.7kgs
DMX
CA8
4ChLighting
Chaser
Switchpack
ICA-8
ICA-410
ICA-416
Stand By:
To black out the unit
Mode selection:
Different run modes, e.g. fast/slow, audio/manual ,Auto etc.
corresponds to different functions.
4-channel switch pack with DMX input and output. DIP switches for
DMX address setting.
Mains input: Maximum 15A total load max. Output: 5A per channel 4
LED’s indicate the output on both the front and back panels.
Power indicator on the back panel.
Function Select:
Functions vary with different fixtures.
Different lights have different modes and different functions.
A compact yet fully featured switching chaser unit.
Four channels and only one 19” rack unit.
Master on/off switch on front, individual channel on/off switches,
select Audio or Chase mode indicated by LED’s on front panel, chase
mode and speed controllers plus remote control via on board DMX.
Size: 480 x 100 x 88 mm
Weight: 2.35 kg
Size: 500 x 230 x 100 mm
Weight: 2.9 kgs
31
PRO
ISSUE 16
Controllers
DMX512 BINARY ADDRESSING
DMX
Master II
ICA-1612W
Advanced universal DMX 512 control for twelve
fixtures of up to 16 channels each. The DMX Master
II continues the development of the popular DMX
Master series with the addition of jog wheels, fog
control, fixture copy and polarity swap.
Power Input: DC 9V 300mA Plugpack
Size: 482 x 132 x 76 mm
Weight: 2.3 kgs
• 30 banks of 8 scenes for a total of 240 scenes.
• 6 programmable chasers with fade and
speed times.
• Blackout, tap sync, and manual override facilities. MIDI controllable
• Sound Activation capability
• Fog control button
• Fixture copy macro
• Fine Pan and Tilt control
• Assignable and reversible jog wheels
Binary addressing is additive. ie. for a DMX start
address of 13, turn on the following DIP switches.
4 (DMX value = 8)
3 (DMX value = 4)
1 (DMX value = 1)
1
1
2
2
3
4
4
8
5
16
6
32
7
64
8
128
9
256
8 + 4 + 1 = 13
For a DMX start address of 1,
turn on the following DIP switches.
1 (DMX value = 1)
iLead 2420
IL-2420
1
2
4
8
16
32
64
IL-2420 is a powerful and professional
DMX console, enabling you to program
and control 20 DMX fixtures, each fixture
can be up to 24 channels. The iLEAD
2420 has 10 movements, 20 presets, 60
banks of 20 scenes, 20 chases, 20 cues, 20
overrides and 20 centre positions built-in
for fast and easy show designing. With
24 faders, 20 function buttons, 4 rotary
wheels and a LCD Display, the iLEAD 2420
allows you to easily program, edit and
operate lighting fixtures.
TECHNICAL AND DATA SPECIFICATIONS
- Voltage: 240V ~ 50Hz
- 2MB internal memory
- 3.6V 80mA NI-MH battery back up
- 19” rack mountable, 6RU rack space
- Dimensions: 483 x 264 x 100mm
- Weight: 5.3kg
32
128
256
MAIN CONTROL FEATURES
- 2 x DMX outputs
- 484 DMX Channels in total, including 481ch for DMX fog, 482ch for future use, 483-484ch for DMX strobe
- Fixture Library (for Acme lighting fixtures), expandable up to 50 fixtures
- 10 built-in movements (Pan/Tilt, loop, fade time)
- 20 programmable chases, with 200 scenes per chase
- 1200 programmable scenes (60 banks x 20 scenes)
- 400 programmable colors and gobos (20 presets, each with 10 colors and 10 gobos)
- Control 20 DMX light fixtures, and each fixture up to 24 channels
- Operate 20 fixture groups simultaneously
- 24 faders for controlling 24 DMX channels
- 20 x Cues to combine chases together and operate chases one by one
- 20 x Overrides to assign special functions to individual fixtures
- 20 x Center positions to set each fixtures central position
- Remote DMX addressing (for Acme fixtures)
- 3 Stand by mode settings
- Jog wheel to adjust audio sensitivity – LCD screen displays value
- Standard MIDI facility
- Lighting library and software downloads available
- DMX fog machine control
- Both DMX and analog strobe control available
FRONT PANEL
- 80 Character backlit LCD display for easy programming and navigation
- 4 large rotary wheels for Pan/Tilt, Menu and Control
- 20 multi function number buttons
- 24 faders
- Strobe button
- 2 remote easy controllers (CA-8)
- Compact flash drive
- Gooseneck USB lamp
REAR PANEL
- 2 DMX outputs (3 pin XLR)
- Midi-in port and Midi-thru/bypass port
- RCA Audio input for chases and built in mic for audio trigger
- 2 5-Pin XLR connectors for remote controller
- 1 x strobe output
E:Cue
E:cue
ExcitE +
LAS
EC-160103
Computer Based
Light Controller
The E:cue LAS is a Windows DMX
based software for the creation
of complex lighting scenes and
light shows. For the conversion
to DMX the E:cue LAS can connect to a wide
range of e:cue DMX output devices
which can meet all demands, from
budgetary to those of a major
project.
TM
DMX Output
The current version of the
E:cue LAS supports up to 8192
DMX channels. E:cue DMX output
devices can be connected to the
PC via USB, serial ports or Ethernet.
Library
A comprehensive fixture
library provides easy access to
DMX equipment. Most known
manufacturers and their products
are already supported. The LAS also
offers a library editor for adding
new fixtures.
Programming
Programmers and lighting
designers with a little experience
will find that the familiar concept
of cues, cuelists, sub- and
grandmasters makes it easy to
start working with the E:cue LAS.
Cuelists support both HTP and LTP
mode. There are various modes for cue fade and timing, including
timecode. Cues can be made to
execute a large number of actions,
such as sending MIDI notes.
More sophisticated programming
is made possible by the included
liveFX effects generator. With
liveFX, you can put mathematical
functions to DMX channels to
achieve circular movement, ramps,
sparkle effects and much more.
Last but not least, the unique E:cue LAS Wizards are there to
reduce otherwise tedious and
repetitive programming tasks to
a few mouse clicks. Generating
chasers, bitmap animations and
scroll texts was never this easy!
Connectivity
The E:cue LAS is an allrounder - future-proof
thanks to the extensive
number of interfaces it
can use:
DMX over Ethernet
(ACN READY)
DMX over USB
Timecode
WYSIWYG & Capture
connect
MIDI
Serial control (RS232)
Drivers for DMX PC Card
Download E:CUE LAS
(Lighting Application Suite)
ISSUE 16
PC to DMX interface
with USB connector.
Designed specifically
to operate with E:
Cue programmer LAS
software.
The Excite+ is a DMX output
device for PC with 1 universe of
DMX (512 channels).
The device can alternately be
used as a DMX input interface.
Technical
Specifications:
Function: DMX output/input
Interface: USB
DMX Interface: XLR 5-Pin
LEDs/Display: 1 status LED(blue)
Max. USB devices per PC:
8 (4096 channels in total)
Power Supply: USB powered
Dimensions (W x H x L):
70 x 20 x 2000mm
Weight: 0.2kg
Special Features:
Electronics integrated in
Neutrik plug
EXCITE+ or other E:Cue interface device required
E:cue
Fader Unit
Detail
EC-160004
Technical Specifications:
Function: manual control desk for e:cue
programmer
Application area: live programming
Interface: USB
LEDs: 20 LEDs
Keys: 73 keys, 13 fader (1 grandmaster/12
submaster), 5 jog dials
Max devices per PC: 4
Power supply: USB powered
Dimensions (WxHxD): 415x280x45mm
Weight: 2 kgs
Accessories: USB A-B cable
FADER UNIT USB
Robust control desk hardware for hands-on access to e:cue programmer
The FaderUnit provides the popular conventional controls of a lighting desk, but it is specifically engineered to work with the E:cue
programmer. The FaderUnit enables the programmer to become faster, easier and more enjoyable to use. 13 faders and 73 keys in
a robust case provide direct access to cuelists, masters and other central features, while five heavy duty jog wheels allow quick and
exact programming fixture parameters. In combination with a FaderUnit and a DMX output device, a laptop or PC becomes a high
level lighting console. Up to four FaderUnits may be connected to one E:cue programmer simultaneously. This means fast control of up to 48 submasters.
33
PRO
ISSUE 16
XENPOW
Lamps
CODE
PRODUCT
DISCHARGE LAMPS
High Intensity 150W 6500K (Reflector)
HMQ 300 Double Ended Lamp (HTB50/DX)
HMQ 575W 5600K Double Ended Lamp (HMI 575)
Metal Halide 575W, 7200K, Double Ended
NSD 150 Lamp (HTI 150W)
Metal Halide 250W, Xenpow, 2-3KV (MSD 250)
NSD 575 Lamp (MSD 575)
NSD 575/2 Lamp
NSD 1200 Lamp
NSD 1200/2K Lamp
NSD 1200 SGK Lamp
500 500W 240V Linear Lamp (R7S)
P2/11 240V 800W (EME)
2000
800
PAR56 MFL 240V 300W
PAR64 240w 1000w
4000
4000
BX-64514L
BX-64516
BX-AB-FCR
BX-AB-FCS
BX-AB-EHJ
BX-AB-BRL
64514 300W 120V
64516 240V 300W
A1/215 [FCR] 12V 100W
A1/216 [FCS] 24V 150W
A1/223 [EHJ] 24V 250W
M32 [BRL] 12V 50W
150
75
50
50
50
50
REFLECTOR LAMPS
A1/231 [EFR] 15V 150W
A1/259 [ELC] 24V 250W
A1/232 [EFP] 12V 100W
50
500
50
1500W Xenon Flash/StrobeTube
200W Xenon Flash/StrobeTube
75W Strobe Flash Tube
750W Xenon Flash/Strobe Tube
UV Lamp 125W
400W UV Lamp
BX-HID-150K
BX-HMQ-300K
BX-HMQ-575K
BX-HMQ-575/2K
BX-NSD-150K
BX-NSD-250/2K
BX-NSD-575K
BX-NSD-575/2K
BX-NSD-1200K
BX-NSD-1200/2K
BX-PX-75S
HALOGEN LAMPS
BX-J500
BX-J800
PAR LAMPS
BX-PAR56MFL
BX-PAR64-CP61
LIFE(AVG)
2000
750
1000
1000
750
2000
1000
1000
2000
1000
CAPSULE LAMPS
BX-AB-EFR
BX-AB-ELC5 BX-AB-EFP
SPECIALTY LAMPS
BX-PX-1500
BX-PX-200
BX-PX-75
BX-PX-750
BX-XPW-125
BX-XPW-400
6
soundivision
36
HardCaseCo
ISSUE 16
35
ISSUE 16
HardCaseCo
Utility Case
RC-07971
(Pick and Pack foam included)
This case is perfect for those little things that
need big protection.
Made from the same quality materials as all
the HardCaseCo range, this case is fitted with
removable foam segments. This makes it the
ideal case for custom fitting a range of fragile
items.
Featuring hard wearing laminated plywood and
durable metal hardware. This case is constructed
to withstand the rigor of the road.
Dimensions
EXT- 30cm(x)58cm(x)15cm
INT- 27cm(x)55cm(x)12cm
Microphone Case
RC-07964
Designed with complete versatility in mind. This
case, along with its quality exterior has a semi
customized interior.
Inside is fitted with 3 layers of foam which can be
removed in segments to customize the case to
accommodate various brands.
The case also features lockable latches and ball
corners for extra protection. Lightweight durable
construction makes it perfect for hire and touring
applications.
Dimensions
EXT- 37cm(x)37cm(x)14cm
INT- 35cm(x)35cm(x)13cm
Dual 250 case
RC-08138
Designed to house two 250W sized moving yokes,
this quality case is completely carpet and foam
lined.
Features include four heavy duty wheels mounted
on the re-inforced base for easy transport, along
with the durable marine plywood construction.
The hardware on this case includes reinforced
carry handles on all four sides, recessed wheel
wells on the lid (for stacking) and hard wearing
butterfly style latches.
The inside also has a separate compartment for
storing mounting brackets.
Dimensions
EXT- 98.9cm(x)56cm(x)63cm
+ castors(13cm)
Dual 575 case
RC-08213
The ultimate protection for two 575W sized
moving yokes, this quality case is completely
carpet and foam lined.
Features include reinforced carry handles on
all four sides, recessed wheel wells on the lid
(for stacking) and hard wearing butterfly style
latches. Inside is a separate compartment for
storing mounting brackets.
Move and transport the case easily via the four
heavy duty wheels mounted on the reinforced
base.
Overall construction is from durable marine
plywood.
36
Dimensions
EXT- 107.5cm(x)57cm(x)71.5cm
+ castors(13cm)
HardCaseCo
ISSUE 16
Draws case MKII
RC-43177
Dimensions
This case would be a welcomed addition to any
production house or touring roadie.
Featuring easy slide draws, enclosed in a rolling
case.
Store more tools and all those “odds and ends” in
the front door compartments.
The Draw Case features quality butterfly latches,
metal ball corners, reinforced handles and is
constructed from strong laminated plywood.
EXT- 57.8cm(x)62cm(x)88cm
Cable Packer MKII
RC-08312
Transport cables and leads
like a pro,this packer features quality construction with
the added bonus of heavy duty wheels fitted to the
base for high mobility.
Dimensions
Completely carpet lined internally, there are two
hardboard dividers which can section case as needed.
The lid features four metal recessed wells for stacking
cases vertically in transport. All four sides are fitted
with reinforced handles and heavy duty ball corners.
EXT- 113cm(x)56cm(x)68cm
INT- 110cm(x)53cm(x)65cm
Cable Packer - Small
RC-05298
This new packer features quality construction with the
added bonus of heavy duty wheels fitted to the
base for high mobility.
The lid features four metalrecessed wells for stacking
cases vertically in transport. All four sides are fitted
with reinforced handles, heavy duty ball corners and
new PENN latches.
Dimensions
EXT- 59.5cm(x)59.5cm(x)67cm
( Including Wheels )
Cable Packer - Medium
RC-05687
This new packer features quality construction with the
added bonus of heavy duty wheels fitted to the
base for high mobility.
The lid features four metalrecessed wells for stacking
cases vertically in transport. All four sides are fitted
with reinforced handles, heavy duty ball corners and
new PENN latches.
Dimensions
EXT- 85cm(x)59.5cm(x)72cm
( Including Wheels )
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement