Moffat, Inc. GP518-B Data Sheet
Moffat, Inc. GP518-CB is a heavy-duty gas griddle with a 20mm thick machined top plate and 31kW thermostatic burner system. It features separate left, center, and right heat zones for precise temperature control. The griddle is fully modular and easy to clean, with a stainless steel exterior and overlapping finish at the front and rear of the plate. It comes with four 63mm dia. heavy-duty 1.2mm stainless steel bench legs with adjustable feet and is ideal for commercial kitchens and restaurants.
advertisement
Technical data sheet for
GAS GRIDDLE 1200mm
GP518-B, GP518-CB, GP518-LS, GP518-RB
Heavy-duty thermostatic gas griddle
20mm thick griddle plate
Ribbed plate options
Mirror chromed plate options
Top weld sealed plates
31kW thermostatic burner system
Separate left, centre, and right heat zones
3 models of base unit
1 model of ventilated refrigeration
base with drawer/door options
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular
Overall Construction
Griddle
• 20mm thick machined top plates standard
• Optional ribbed plate sections
• Optional mirror finish hard chrome plates
• 2.5mm thick stainless steel splash guards sides and rear
• 2.0mm thick grease channel
• Three 10.3kW 3 bar even heat burners with three thermostatic controls
• Full pilot and flame failure protection with piezo ignition
• Welded hob surround with 1.5mm stainless steel bull nose
• Side panels 1.2mm stainless steel
• Splashback 1.2mm stainless steel
• Enamelled control panel
• Stainless steel grease drawer
• Overlapping finish at front and rear of plate for easy clean
Bench mount (supplied as –B model)
• Four 63mm dia. heavy-duty 1.2mm stainless steel bench legs with adjustable feet
• Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
• Fully modular for match suite finish
• Double skin 0.9mm stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)
• Up to eight 65mm GN 1/1 capacity
• 63mm dia. heavy-duty 1.2mm stainless steel legs with two adjustable feet at front and two rollers at rear
Leg stand (supplied as –LS model)
• Fully modular for matched suite finish
• Framed top for connection to Griddle
• 63mm dia. heavy-duty 1.2mm stainless steel legs with two adjustable feet at front and two rollers at rear
• Fully modular framed stand shelf with 0.9mm stainless steel finish
• Suitable for rear or through shelf gas connection to Griddle
• Quick assembly design
GP518-LS
Refrigerated base (supplied as –RB model)
• Self contained suite matched modular base
• Ventilated system with R134a refrigerant
• -2° to + 8°C temperature (Tropical Climate rated)
• Two GN 1/1 drawers
• 100mm deep pan capacity
• Heavy-duty European telescopic drawer guides
• Magnetic drawer gaskets (replaceable without tools)
• 50mm fully foamed CFC free insulation
• Stainless steel exterior and interior
• Anti-corrosion treated evaporator
• No condensate drain required
• 63mm dia. heavy-duty 1.2mm stainless steel legs with adjustable feet
• Condensing unit removable through front of unit for service
• Easy clean interior
Controls
Griddle
• Separate left, centre, and right side heat zones
• Three 90-300°C thermostats
• Large easy use control knobs - heat resistant reinforced
• Easy view control settings on knobs
• Flame failure pilot burners
• Piezo ignition to each pilot burner
• Over-temperature safety cut-outs
Refrigerated Base
• Digital control electronic thermostat
• Automatic defrost
• Automatic evaporation of defrost water
• -2° to +8°C temperature range
Cleaning and Servicing
• All models with easy clean stainless steel external finish
• Plate is finished front and rear with overlap construction to remove cleaning traps
• Control service and gas conversion through front of unit
• Burner service requires plate removal
• Refrigerated Base condenser removable through front of unit
Technical data sheet for
GAS GRIDDLE 1200mm
Specifications
Griddle
Burner
Three 3 bar chromed steel burners
Individual pilot, flame failure and piezo ignition
Gas power (gross)
31kW, 105,700 Btu/hr
Plate
Cooking surface 1192mm x 530mm, 6318cm2
Gas connection
R 3 /
4
(BSP) male
All units supplied with Natural and LP gas regulator
Refrigerated Base
Type
Ventilated system
Refrigerant
R134a (160grams)
Climate classification
T – tropical
Electrical connection
220-240Vac, 50Hz, 1.8A, 1P+N+E
3 pin 13A plug cordset fitted
Dimensions
Bench models
Width 1200mm
Depth 812mm
Height 315mm
Incl. splashback 485mm
All models (excluding Bench model)
Width 1200mm
Depth 812mm
Height 915mm
Incl. splashback 1085mm
Nett weight
Bench and Leg Stand models
196kg
Cabinet Base and Refrigerated Base models
242kg
Packing data
Bench and Leg Stand models
0.72m3, 276kg
Width 1245mm
Depth 870mm
Height 665mm
Cabinet Base and Refrigerated Base models
1.36m3, 322kg
Width 1245mm
Depth 870mm
Height 1255mm
Gas types
Available in Natural gas and LP gas, please specify when ordering
Units supplied complete with gas type conversion kits
Options
Adjustable feet at rear
Joining caps
Castors
Ribbed plate options
Mirror chromed plate options
GP518-B
GP518-LS
GP518-CB
GP518-RB
PLAN
Cert 6898
Moffat / 7.09 / 1140
advertisement
Related manuals
advertisement