HK-2-F3 Data Sheet
SECTION B
Access Control
Biometric Readers
Table of Contents – Access Control Biometric Readers
HandKey® II Access Control Readers . . . . . . . . . . . . .B1-B2
HandKey CR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B3
HandKey Outdoor HandReader® Enclosures . . . . . . . .B4-B5
HandKey ID3D Hand Indentity Verifier . . . . . . . . . . . . B6-B7
HandNet™ for Windows . . . . . . . . . . . . . . . . . . . . . . .B8-B9
Finger Key DX . . . . . . . . . . . . . . . . . . . . . . . . . . .B10-B11
Certified Distribution
Our goal at IR Security & Safety is to provide product solutions and services that continually exceed our customers’
expectations through our network of dealers and distributors. Certain product solutions in this Electronic Access Control
product catalog require a higher level of support in order to ensure total customer satisfaction. These electronic access control
product solutions are available only through IR EAC Certified Dealers who can provide consultative services including training,
hardware/software installation and configuration, and after installation support. Product solutions that require IR EAC Certified
Dealers will be flagged with the icon above on each Table of Contents page for each section of this catalog.
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
Notes
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
HandKey® II Access Control Readers
Increased Convenience
by eliminating credentials
Increases Security Level
Positive identity of person
Fast and Easy to Use
Verifies the size and shape
of a person's hand all in
less than one second
Schlage Recognition Systems brings the true security
and convenience of biometric technology easily within
reach of most access control applications. The HandKey
II utilizes field-proven hand geometry technology that
maps and verifies the size and shape of a person's hand
all in less than one second.
The benefits of biometric security were once reserved for
high-security applications, but the HandKey II changes
that. Tens and thousands of HandKeys are already
installed in applications that range from health clubs and
day care centers to laboratories and prisons. Its ease of
use and reliability have made the HandKey the biometric
standard for the access control industry. The lower cost
of the HandKey II now makes the choice even easier.
Real security at a reasonable price
The HandKey II provides the security and convenience
you need at a price you can afford, even when compared
to card-based systems. Because your hand is your card,
HandKey II allows access only to authorized people
without the hassles of a card or key. By eliminating cards,
you can reduce administrative costs while greatly
increasing the level of security. Users appreciate the
convenience of never worrying about keeping track of a
card or key.
Benefits of Using the HandKey II Access Control Reader
• Higher Security Credential
• Savings versus card-based systems
• Fast and easy to use
• Increases convenience by eliminating cards
• Integrates into existing systems
• Field proven reliable technology
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
B1
HandKey® II Access Control Readers
Door Control and Monitoring
The HandKey II's design provides the ultimate in system reliability. Each HandKey II is a complete door
controller providing door lock operation, request for exit, and alarm monitoring. All information, including
biometric data and decision-making capability resides locally. This ensures your doors are secure and will
continue to operate properly even if all communications to the main access control computer are lost.
HandKey™ Network Reader
Specifications
Part Number
Size
Weight
Verification time
Template Size
Power
Memory Retention
I.D. Number
Transaction Storage
Communications
Baud Rate
User Capacity
Door Controls
Card Reader Input
Card Reader
Emulation Output
Duress Code
Timezones
Selected Options
BB-200
MD-500
EN-200
EM-801
EM-803
DC-102
KP-201
PROX
HK-2
8.85 in. (22.3 cm.) wide
11.65 in. (29.6 cm.) high
8.55 in. (21.7 cm.) deep
6 lbs. (2.7 kg)
Less than 1 second
9 bytes
12-24 VDC or VAC
Up to 5 years via the standard
internal lithium battery.
1 to 10 digits from keypad or card reader
5120 transactions, buffered
RS-485 (4 wire and 2 wire)
RS-232 Serial Printer Support or
network communications
1200 to 28.8K bps
512 Users standard
Internally expandable to 32,512
Door Lock Output
Sinks 0-24VDC, 100mA max.
Alarm Monitoring
Tamper
Door Switch
Two Auxiliary Inputs
Three Auxiliary Outputs
Sinks 0-24VDC, 100mA max.
Request for Exit
Switch or Keypad
Proximity, Wiegand, magnetic stripe,
or barcode
Wiegand, magnetic stripe, or barcode
1 digit, user definable
62 user definable time zones
Unlimited holidays
Operational Battery Backup
High Speed Internal Modem
Ethernet Communications Module
Memory Expansion to 9,728 Users
Memory Expansion to 32,512 Users
Data Converter
Auxillary Keypad
HID Proximity Reader
Stand-alone
Door Switch
Features of the HandKey II include:
• Door operation and monitoring
• Card reader input
• Request for exit
• Tamper switch
• Memory expansion from 512 (standard) to 32,512 users
• RS-232 printer output
• Optional modem or Ethernet module
• Stand alone or networked operation
• Card reader emulation mode
• Integrated wall mount design
• Multiple auxiliary inputs and outputs
• 62 user definable time zones
• Outdoor version available
Stand alone or fully integrated
Systems can be as simple as one unit on the computer room door to
hundreds of units networked together. The HandKey II's card reader
emulation mode makes adding it to existing access control systems
fast and easy. A variety of communications options, including dial-up
modems and Ethernet, allows you to design a system that's right for
your facilities.
In a network
Schlage Recognitions Systems’ HandNet™ for Windows software links
a virtually unlimited number of HandKey units into an integrated door
access control system. All alarms and transactions report back in real
time to the central computer, making door and alarm monitoring easy
and efficient. Activity, user, and system reports can be easily generated.
The central computer handles all hand template management
automatically, allowing supervised enrollment at any reader and
system-wide deletions. An optional internal modem lets you include
remote site operations. Ethernet communication is also available.
In a network
PC running
HandNet for Windows®
System Network
RS-485, Ethernet , or Modem
Door Switch
Door Lock
Door Switch
Door Switch
HandKey II
Stand alone operation lets you provide true security
to a single door at an affordable price.
B2
Door
Lock
Door
Lock
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
Door
Lock
HandKey CR
SHK-CR
A Schlage Recognition Systems HandReader equipped with a
MIFARE® smart card reader is the perfect match of industry
leading biometrics and advanced card technology.
•
•
•
•
•
User's template is stored on the card
Unlimited users
Simplified template managment
Dual factor authentication
Seamless integration into existing access control and/or
time & attendance systems
Smart cards look just like any other card, but contain both
memory and a processor embedded within the card. Memory is
divided into separate sectors that can be protected by individual
software codes (keys), so multiple applications can be contained
on a single card. Combining a HandReader with a smart card
creates a powerful combination of security and portable template
management. By employing the card as a storage device, users
no longer need worry about complicated network wiring to
resolve template distribution.
Specifications
Size:
8.85 in (22.3 cm) wide
11.65 in (29.6 cm) high
8.55 in (21.7 cm) deep
Weight:
6 lbs (2.7 kg)
Power:
12 to 24 VDC or 12 to 24 VAC 50-60 Hz,
Verification Time:
Less than one second
ID Number Length: 1 to 10 digits from keypad
or card reader
User Capacity:
512 users expandable to 32,512 users
Template Size:
9 bytes
Baud Rate:
1200 to 28.8 Kbps
Card Reader Input: Standard format Wiegand/proximity:
26bit (8 bit facility code) Optional
formats for Wiegand, proximity
magnetic stripe
Card Reader Emulation:
Auxiliary Outputs:
Standard format Wiegand/proximity:
26bit (8 bit facility code0 Optional
formats for Wiegand, proximity,
magnetic stripe
Two outputs available both sink 0-24
VDC, 100mA max.
Outputs may be activated by:
Tamper, Try Again, ID Lockout, Duress
Code Entered, F1 Key Presesed,
F2 Key Pressed, Battery Backup On
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
B3
HandKey® Outdoor HandReader® Enclosures
Blizzard, Hurricane and Tsunami
Recognition Systems provides a full line of enclosures to protect your HandReader from the elements. Three different, proven
solutions are available to ensure your HandReader performs and keeps performing regardless of your environment.
Benefits of Using the outdoor HandReader Enclosures
• Suited for the coldest climates and industrial environments
• Direct weather design
• Built to NEMA type 4 standards
B4
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
HandKey® Outdoor HandReader® Enclosures
Blizzard, Hurricane and Tsunami
BLIZZARD
Ideally suited for the coldest climates and industrial environments, the Blizzard enclosure
is constructed of heavy-gauge zinc-coated steel and features a weather-sealed keypad,
low-temperature display and heated interior. Even though it protects from incident rain and
weather, the unit should be mounted under an enclosure or awning. The Blizzard enclosure
is a fully integrated unit and comes complete with HandReader and internal heater.
The Blizzard enclosure must be ordered as either the HandKey (ID3D-RW)
HURRICANE
for access control, or HandPunch (HP-RW) for time and attendance.
A little rain never hurt anyone, and a lot of rain won’t hurt the Hurricane enclosure.
Constructed from high-impact ABS plastic, the unit is designed for direct weather. A
generous lid offers protection from driving rain, and the contoured design facilitates
water runoff. The Hurricane has been designed so it can be added to an existing installation.
When used with a heater-equipped HandReader (INT-HTR option), it provides the
ultimate solution for cold weather, direct exposure environments.
Order the Hurricane (HURCNE) option with HandPunch 1000, 2000, 3000, 4000,
HandKey II, CR and CM.
TSUNAMI
For the harshest environments, the Tsunami enclosure is water sealed and built to NEMA
type 4 standards. The HandReader is protected from both splashing and hose-directed
water, making it an ideal solution for industrial and food processing areas where
hose-directed water is used for cleaning. In addition, when used with a heater-equipped
HandReader (INT-HTR option), the Tsunami enclosure can withstand the bleakest
of environments.
Order the Tsunami (TSNAMI) option with HandPunch 1000, 2000, 3000, 4000,
HandKey II, CR and CM.
The Integrated Heater (INT-HTR Option)
The INT-HTR option includes an integrated heating element, a 24V power supply and an extended range LCD. The
temperature-regulated heater element is built into the platen, where users place their hand, providing comfortable
and trouble-free use even in the coldest environments. The heater is built directly into the HandReader. Therefore, it
must be ordered at the same time the HandReader is ordered and is not field retrofittable.
Although intended primarily for use with an enclosure, the INT-HTR option may be used in cooler environments
where an enclosure is not required, such as an unheated warehouse.
SPECIFICATIONS:
Blizzard
Hurricane*
Tsunami*
Temperature Range
-35°F to 120°F
-37°C to 49°C
-20°F to 120°F
-29°C to 49°C
Environment
Indirect exposure to rain and snow.
Best suited for extreme cold and
potential vandalism prone areas.
Provides significant protection from
rain, sleet, snow, splashing water,
falling dirt and windblown dust.
-45°F to 120°F
-43°C to 49°C
Provides complete protection against
rain, sleet, snow, splashing water, hosedirected water, falling dirt and wind
blown dust when the door is closed.
Dimensions
HxWxD
Gross Weight
(including Reader)
HandReader
10.0 in. x 10.0 in. x 10.0 in.
25.4 cm x 25.4 cm x 25.4 cm
23.0 lbs
10.5 kg
HandKey
HandPunch
14.0 in. x 12.0 in. x 10.5 in.
58.5 cm x 35.6 cm x 29.3 cm
11.5 lbs
5.3 kg
HandPunch 1000, 2000, 3000,
4000, HandKey II, CR and CM
23.0 in. x 14.0 in. x 11.5 in.
58.5 cm x 35.6 cm x 29.3 cm
45.0 lbs
20.5 kg
HandPunch 1000, 2000, 3000,
4000, HandKey II, CR and CM
* with INT-HTR option
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
B5
HandKey® (ID3D)
Hand Identity Verifier
Biometric identification is the automatic assessment of a uniue body feature or personal action. Biometric systems are
superior because they provide a nontransferable means of identifying people not just cards or badges. The HandKey® uses
the uniqueness of three dimensional hand geometry to controll access to your valued resources. And it does it better than any
other biometric systems. Results of independent field tests show that the HandKey has the best overall performance and user
acceptance of any biometric device.
Access Control
Fast
Verification time is typically one second.
Accurate
Positive indentification without rejection.
User Friendly
Non-invasive measurement. Hand is simply placed on a flat plate in full view of the user.
Low Cost
System cost is competitive with card reader systems.
Easy Enrollment
Small 9 byte template means fast enrollment with minimum data storage.
System Compatible
Stand alone or systems use. Emulates card readers for easy integration into card systems.
B6
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
HandKey® (ID3D)
Stand Alone System
The HandKey can operate as a complete stand alone
access control station. Door lock operation and alarm
monitoring of the door status is provided. An external
alarm circuit is included for operating an audio or visual
alarm. Up to 120 HandKeys can be networked together
using HandNet Plus™ software to accommodate larger
applications.
Specifications
Size
Weight
Mounting
Power
Third Party System Interface
The HandKey can easily be integrated into new or existing
third party access control systems using its card reader
emulation output. All Weigand, proximity and mag stripe
formats can be accommodated. No modifications are
needed to the third party system. The HandKey scan be
interconnected via RS-485 twisted pair for hand data
transfer.
Verification time
Capacity
Memory Retention
I.D. Number
Template Size
Transaction Storage
Duress Code
Alarm Monitoring
Exit Request
Communications
Card Reader Input
Card Reader
Output Emulation
Printer
Network Capacity
Time Zones
Holiday Schedules
6.46 in. (16.4 cm.) wide
8.25 in. (21.0 cm.) high
7.20 in. (18.5 cm.) deep
8 lbs. (3.6 kg)
Table top, recessed (WM-220) or
surface (WM-201) wall mount kit
12-14 VDC max. allowable
@0.5 Amp min.
Less than 2 seconds, 1 second typical
256 Users standard
Internally expandable to 27,904
Up to 5 years with internal
lithium battery.
1 to 10 digits from keypad or
external card reader
9 bytes
3.405 buffered
Single digit, user defined
Tamper, door switch, auxiliary input
Switch or KP-103 keypad
2 Serial Ports, RS-232/422/485
Wiegand, magnetic stripe, barcode or
proximity
Wiegand or magnetic stripe
Standard RS-232 serial printer
supported
120 hand scanners with computer
as host PC
62 programmable
User definable
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
B7
HandNet™ For Windows®
Version 2.0
Now you can have the security and convenience of
biometric access control – at the cost of a
card-based system.
With HandKey® biometric readers and HandNet for
Windows® software, you'll dramatically increase your
security and eliminate time-wasting card administration.
With HandKey readers, your hand is your card.
HandNet gives you networked access control that's easy
to install, simple to use, effortless to administer, and
affordable. You'll enjoy complete door monitoring in real
time for multiple sites.Remote sites can be monitored via
modem or Ethernet. Every HandKey unit has a built-in
door controller, so you can create an access
control network by simply attaching a PC. You pay
only for the software – there's no additional cost
for networking up to 1000 doors.
Powerful and easy to use HandNet software gives you
centralized access control. The system typically runs
"online", providing real-time, comprehensive door activity
monitoring, remote door control, and alarms. If the
computer goes offline for any reason, the networked
doors continue to operate without interruption.
HandNet's user-friendly interface runs on Windows
95/98/2000/ME/NT. Extensive use of wizards makes
setup and system maintenance effortless.
Tens of thousands of HandKey systems are used every
day in applications worldwide, ranging from health
clubs and computer rooms to laboratories and stock
rooms. Reliability and ease of use have established
Recognition Systems as the acknowledged global leader
in biometric access control.
Benefits of Using HandNet
• Complete door access and monitoring
• Automatic hand template management
• Real time monitoring or audit trail mode
• Easy setup and administration
B8
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
HandNet™ For Windows
Version 2.0
NEW FEATURES
FEATURES
Temporary users
When new users are enrolled in the system they can be
assigned access to specific readers with definable time
zones through an unlimited number of access profiles.
HandNet 2.0 also has a start and end date for access, so
temporary users like consultants or guests can be granted
access for a few days, weeks or months. The system then
automatically disables access rights at the end of the term.
Users can be reactivated in the software so there is no need
to re-enroll.
Monitor over 1000 HandKey units in real time
Hardwired communications operate via RS422, using up to 38 serial
ports. Dial-up modem and Ethernet connections are also supported.
Remote Enrollment
Many installations use an enrollment reader to input new
users in the system. The new Remote Enrollment feature
enables a reader to be controlled from the software. So a
guard behind a glass partition or a supervisor in a distant
office can enroll new users without physically going to the
reader.
Automatic hand template management
Enroll users at any HandKey in the system. Hand template data from
the enrolling HandKey is automatically backed up on the PC and
distributed to selected doors in the system, as specified. Dial-up
remote modem locations are also updated automatically when a new
user enrolls.
Import / Export of users
The new import/export feature enables sharing of user
information among different HandNet installations. For
example, the security officer in New York can send a user’s
record to the office in Taipei. The office in Taipei can then
add the user to their system, setting their own access
restriction. When the user arrives he will be in the system
and there is no need to re-enroll.
System Network
RS-485, Ethernet , or Modem
Door
Lock
Door Switch
Door
Lock
Door Switch
Door
Lock
SYSTEM REQUIREMENTS
Computer
Memory
Drives
Hard Disk
Monitor
Operating System
Supported
Communications
Complete door monitoring
HandNet provides complete door management. Conditions that can be
monitored in real time are: door forced open, door open too long,
duress, and multiple auxiliary input and output conditions. Authorized
operators may override the lock condition at any door.
No dedicated PC required
HandNet can run in the background while other tasks are performed on
the PC. When an alarm condition occurs, the user is notified
immediately. If only an audit trail is required, the PC need not be always
turned on, because each HandKey can buffer over 3000 transactions.
Monitor multiple remote sites
HandNet allows you to dial up multiple remote sites automatically,
following a user-definable schedule. Assigning a name to each reader
and site allows instant identification of the location of each HandKey.
PC running
HandNet for Windows®
Door Switch
Manage over 100,000 users
Add, remove and track users from a central PC. Up to 25 user-definable
text fields may be specified for each user, in addition to standard fields
such as name, ID number, access profile, authority level, and rejection
threshold. The user window helps you keep track of people by
displaying the last reader used, with date and time of use.
Pentium 233Mhz or higher (133Mhz minimum)
32 Mb (16 Mb minimum)
CD Rom for installation
Floppy or tape drive recommended for backup
50 Mb minimum,
10 Mb free space required
SVGA color,
1024 X 768 recommended
(800 X 600 minimum)
Windows 95/98/2000/ME/NT/XP
RS422 (RSI data converter DC-102 included)
Dial-up modem
Ethernet
Access restrictions
HandNet provides complete access control by user ID, time, and
location. The access profile wizard makes it easy to restrict time and
location. HandNet supports 60 definable time zones, with four start and
stop intervals per zone. An unlimited number of access profiles can be
defined. The holiday table can maintain an unlimited number of entries.
Easy maintenance
Automatic transaction archiving minimizes maintenance headaches.
You can define the archiving process based on file size, days elapsed,
or the day of the month.
Customizable activity reports
Activity reports can be defined and saved, showing only the data you
need. The data source can be either current transactions or archived
data.
Simplified activity monitoring
HandNet lets you define filtered activity screens that display only
activities for the sites, readers, or users you specify. Each of these
screens are easily accessible through a tabbed display system. A
predefined alarm activity screen makes alarm acknowledgment as
simple as a couple of clicks of the mouse.
Note: RS485 2-wire configuration cannot be used with HandNet for
Windows without DC-103 intelligent data converter
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
B9
FingerKey DX
Schlage Recognition Systems full line of biometric products, which encompasses multiple core technologies, ensure you get
the right solution to fit your application. Fingerprint readers are a secure and lower cost biometric alternative for access
control points that haveminimal traffic flow and small user populations. They are an ideal solution for securely gaining access
to computer rooms, telco closets, document control facilities, laboratories and other key or critical infrastructure points.
Whether you need fingerprint, hand geometry or even both at once Recognition Systems has a solution for you.
Benefits of Using FingerKey DX
• High security, low cost solution
• Perfect for small user populations
• Elegant design fits into any environment
• Durable optical sensor design
• Easy integration into new and existing electronic access control systems
• Integrated card reader options allow for single reader installations
• Extremely flexible with a controllable LED bar and buzzer, plus configurable Wiegand and Clock/Data inputs and outputs
B10
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
FingerKey DX
Specifications
Features and Options
• Stylish, high quality terminal with keypad and LCD
• Tough polycarbonate construction
Product Name:
Size:
• Keypad ID entry for systems without cards
• LED bar and Buzzer that can be controlled by a pan
• Durable optical sensor
Weight:
Environment:
• Configurable Wiegand or Magstripe output
• Multiple reader networking without a computer
• External card reader input
• Easy installation to double gang-box
• Integrated HID proximity reader option (DX-2100)
Verification time:
Template Size:
• Integrated HID iCLASS reader option (DX-2200)*
Power:
• Integrated MIFARE reader option (DX-2400)*
• Ethernet communication option (FPE-100)*
• Memory expansion (FPM-500; FPM-2000)
• HandNet Lite template distribution software*
Memory Retention:
I.D. Number:
Communications:
Baud Rate:
User Capacity:
Card Reader Input:
Card Reader Output:
Duress Code:
Regulatory:
Selected Models:
Selected Options:
FingerKey DX
5.31 in. (13.49 cm) wide
5.03 in. (12.78 cm) high
2.98 in. (7.75 cm) deep
1.5 lbs. (0.57 kg)
Indoor Applications Only
Operating: 32°F to 113oF (0°C to 45°C)
Relative Humidity: 20% to 80% NC
Non-operating (storage):
14°F to 140°F (-10°C to 60°C)
Relative Humidity: 5% to 85% NC
2 seconds, typical
400 bytes per image with two images
per finger
12 VDC ±10% Reg. 0.5 AMP Max
12 VDC ±10% Reg. 0.2 AMP Nominal
Up to 2 years via the standard internal
lithium battery.
1 to 15 digits from keypad or card reader
RS-232, RS-485
Ethernet Option (10/100baseT)*
RS-232, RS-485
4800, 9600, 19200, 28800, 38400, 57600
250 Users Standard
500 and 2000 Users Optional
Two fingers per user
External:
Proximity
Wiegand
Magstripe
Internal:
HID Proximity
HID iCLASS*
MIFARE
Wiegand (Multiple Configurations)
Magstripe (ABA Track 2)
Alternate Finger
FCC Approved
CE and UL294 Pending
DX-2000 LCD, Keypad
DX-2100 LCD, Keypad, HID Prox reader
(integrated)
DX-2200* LCD, Keypad, HID iCLASS
reader (integrated)
DX-2400* LCD, Keypad, MIFARE reader
(integrated)
FPE-100 Ethernet TCP/IP*
FPM-500 Memory upgrade 250 to 500 users
FPM-2000 Memory upgrade 250 to 2000 users
FPM-2000-U Memory upgrade 500 to 2000
WAR-EXT users1 year extended warranty
*Contact factory for availability
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
B11
Notes
B12
Questions? Call: 800-700-7447 • FAX: 408-341-4101 • Visit us on the Internet at www.irsecuritytechnologies.com
Schlage - Electronic Security • 1520 Dell Avenue • Campbell, CA 95008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising