DTS | SCENA COMPACT LED 50 | User`s manual | DTS SCENA COMPACT LED 50 User`s manual

SCENA LED 80 FC
SCENA LED 80 PC FC
SCENA LED 80 FR FC
User’s Manual rel. 1.0 GB
D.T.S. Illuminazione s.r.l. – ITALY
http://www.dts-lighting.it/
Made in Italy
2
Le informazioni contenute in questo documento sono state attentamente redatte e
controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze.
Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato,
riprodotto per intero o in parte senza previo consenso scritto della D.T.S .
D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche
estetiche , funzionali o di design a ciascun proprio prodotto. D.T.S non assume alcuna
responsabilità sull’uso o sull’applicazione dei prodotti o dei circuiti descritti.
The information contained in this publication has been carefully prepared and
checked. However, no responsibility will be taken for any errors. All rights are
reserved and this document cannot be copied, photocopied or reproduced, in part or
completely, without prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to
any of its products without prior notice. D.T.S. assumes no responsibility for the use or
application of the products or circuits described herein.
Les informations contenues dans le présent manuel ont été rédigées et contrôlées
avec le plus grand soin. Nous déclinons toutefois toute responsabilité en cas
d'éventuelles inexactitudes. Tous droits réservés. Ce document ne peut être copié,
photocopié ou reproduit, dans sa totalité ou partiellement, sans le consentement
préalable de D.T.S.
D.T.S. se réserve le droit d'apporter toutes modifications et améliorations esthétiques,
fonctionnelles ou de design, sans préavis, à chacun de ses produits. D.T.S. décline
toute responsabilité sur l'utilisation ou sur l'application des produits ou des circuits
décrits.
Las informaciones contenidas en este documento han sido cuidadosamente
redactadas y controladas. Con todo, no se asume ninguna responsabilidad por
eventuales inexactitudes. Todos los derechos han sido reservados y este documento
no puede ser copiado, fotocopiado o reproducido, total o parcialmente, sin previa
autorización escrita de D.T.S.
D.T.S. se reserva el derecho a aportar sin previo aviso cambios y modificaciones de
carácter estético, funcional o de diseño a cada producto suyo. D.T.S. no se asume
responsabilidad de ningún tipo sobre la utilización o sobre la aplicación de los
productos o de los circuitos descritos.
3
INDEX:
1- SYMBOLS ................................................................................................................. 4
2- GENERAL WARNING .............................................................................................. 4
3- GENERAL WARRANTY CONDITIONS .................................................................... 4
4- TECHNICAL FEATURES ......................................................................................... 5
5- ACCESSORIES ........................................................................................................ 6
6- IMPORTANT SAFETY INFORMATION .................................................................... 7
6.1 Fire prevention...................................................................................................... 7
6.2 Prevention of electric shock .................................................................................. 7
6.3 Safety ................................................................................................................... 7
6.4 Waste Electrical and Electronic Equipment directive ............................................ 7
7- INPUT / OUTPUT CONNECTIONS........................................................................... 8
8- DMX SIGNAL CONNECTION ................................................................................... 9
8.1 DMX Addresses.................................................................................................. 10
8.2 Selecting the DMX address ................................................................................ 10
9- FIRMWARE UPDATING ......................................................................................... 10
10- DISPLAY FUNCTIONS ......................................................................................... 11
11- DMX PROTOCOL ................................................................................................. 17
4
1- SYMBOLS
Graphic symbols used on this manual:
THIS SYMBOL INDICATES A HOT SURFACE
THIS SYMBOL INDICATES ELECTRIC SHOCK
RISK
!
THIS SYMBOL INDICATES GENERAL RISK
THIS SYMBOL MEANS YOU CAN PLACE THE
UNIT ON NORMALLY FLAMMABLE SURFACES
LED 30 cm
THIS SYMBOL INDICATES THE MINIMUM
DISTANCE TO BE KEPT BETWEEN THE UNIT
AND THE ILLUMINATED OBJECTS
THIS SYMBOL INDICATES THE EUROPEAN
COMMUNITY DIRECTIVE 2002/96/EC ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
2- GENERAL WARNING
Read the instruction contained in this user manual carefully, as they give important
information regarding safety during installation , use and maintenance.
The device is not for domestic use and must be installed by a qualified electrician or
experienced person.
Always disconnect the device from the mains before maintenance.
The device must always be equipped with an efficient ground connection.
3- GENERAL WARRANTY CONDITIONS
The unit is guaranteed for 36 months from the date of purchase against manufacturing
material defects.
5
4- TECHNICAL FEATURES
OVERVIEW
SCENA LED 80 FC is a compact, lightweight, DMX-controlled LED projector equipped
with an high-power Full Colour (RGBW) LED featuring 4 LED channels (Red / Green /
Blue / White); 3660 Total Lumens.
The unit in available in two models: SCENA LED 80 PC FC, featuring a Ø 90 mm PC
lens, and a long excursion 10°-76° linear zoom with high-efficiency optical system,
enabling it to be used as a PC Beam or a very wide Wash (4245 Lux / 2 m).
SCENA LED 80 FR FC, featuring a Ø 112 mm Fresnel lens, and a long excursion
14°-77° linear zoom (3864 Lux / 2 m) with high-efficiency optical system.
SCENA LED 80 FC is a modern alternative to conventional lights, improving light
quality, flexibility of use and installation, energy savings and component duration.
The fixture doesn’t heat up and the projection is always flicker free.
The dimming curves are similar to those of halogen lamps.
The connectors are Powercon In/Out and 5 poles DMX In/Out.
SCENA LED 80 FC is contained in a strong housing with folded edges, designed to
resist all the rigors of continuous use.
Also, the yoke has an exclusive round flange + clutch system which guarantees a
perfect grip and safer operation.
PRODUCT CODES:
03.TS026.03.A
03.TS026.44.A
03.TS026.46.A
03.TS026.03.F
03.TS026.44.F
03.TS026.46.F
SCENA LED 80 FC *PC lens *White finishing
SCENA LED 80 FC *PC lens *Grey Silver finishing
SCENA LED 80 FC *PC lens *Black finishing
SCENA LED 80 FC *Fresnel lens *White finishing
SCENA LED 80 FC *Fresnel lens *Grey Silver finishing
SCENA LED 80 FC *Fresnel lens *Black finishing
LED Technology
1 x FULL RGBW LED; 3660 Lumens
Optical group
PC version (Ø 90 mm PC lens), 4245 Lux / 2 m, 10° - 76° linear zoom
FR version (Ø 112 mm Fresnel lens), 3864 Lux / 2 m, 14° - 77° linear zoom
Control
10 DMX channels (Default)
4 digit 7 segments LED display + 4 soft keys
Connectors
Power supply: Powercon In & Out connectors
DMX: 5 poles In & Out connectors
Power supply
Electronic full-range 90-260Vac , 50/60 Hz
Consumption: max 90W
Weight
4 Kg (PC version)
3,7 Kg (FR version)
6
DIMENSIONS
5- ACCESSORIES
As standard
1 x User’s Manual
1 x POWERCON male cable connector (D.T.S. Code 0520P014)
1 x XLR 5 pins male cable connector (D.T.S. Code 0508B028)
1 x XLR 5 pins female cable connector (D.T.S. Code 0508B027)
1 x Filterframe for SCENA COMPACT *Black finish (D.T.S. Code 02M00422.46)
Optional (on request)
- “C” Clamp G50 (Max. Load. 10 Kg) *Black finish (D.T.S. Code 0521A012)
- “C” Clamp G60 (Max. Load. 50 Kg) *Black finish (D.T.S. Code 0521A004)
- Barndoor for SCENA COMPACT *Black finish (D.T.S. Code 03.TA206)
7
6- IMPORTANT SAFETY INFORMATION
6.1 Fire prevention:
It is permissible to place the unit on normally flammable surfaces.
Suitable for mounting on normally flammable materials surfaces greater than 200°C
with some combustion time lag.
Minimum distance from the closest illuminable surface: 30 cm.
Replace any blown or damaged fuses only with those of identical value (2AT).
6.2 Prevention from electric shock:
High voltage is present inside the unit.
Unplug the unit prior to performing any operation which involves touching the inside of
the unit.
This equipment must be grounded, do not connect to non-grounded supplies.
The use of a thermal magnetic circuit breaker is recommended for each SCENA LED
80 FC unit. Use only AC supplies 90-260V , 50-60 Hz.
SCENA LED 80 FC should never be located in position exposed to rain or in areas of
extreme humidity.
A good air ventilation is essential for proper equipment work.
6.3 Safety:
!
The external surface of the unit may exeed 50°C; never handle the unit until at least 5
minutes have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exeed 40°C and should not be lower than -10°C.
6.4 Waste Electrical and Electronic Equipment (WEEE) directive:
The machine, accessories and packaging should be sorted for environmental-friendly
recycling.
For EC countries: according to the European Directive 2002/96/EC for Waste
Electrical and Electronic Equipment and its implementation into national right,
luminaires that are no longer usable must be collected separately and disposed
of in an environmentally correct manner.
8
7- INPUT / OUTPUT CONNECTIONS
DISPLAY PANEL
DMX INPUT
XLR 5 Pins Male Panel Connector
DMX OUTPUT
XLR 5 Pins Female Panel Connector
FUSE 2AT
MAINS AC
INPUT
90-260V,
50/60 Hz
MAINS AC
OUTPUT
90-260V,
50/60 Hz
MAX 16A
9
8- DMX SIGNAL CONNECTION:
The unit operates using a digital DMX 512 signal.
Connection between the controller and the unit or between units must be carried out
using a two pair screened ø 0.5 mm.
Ensure that the conductors do not touch each other.
Do not connect the cable ground to the DMX connector chassis.
The plug housing must be isolated. Connect the mixer signal to the DMX IN projector
plug and connect it to the next projector by connecting the DMX OUT plug on the first
unit to the DMX IN plug of the second one.
In this way, all the projectors are cascade connected.
CONTROLLER
STANDARD
DMX 512
5
1
4
2
1=GND
2=DATA3=DATA+
3
DMX IN
DMX OUT
DMX IN
DMX OUT
DMX IN
DMX OUT
DMX OUT
If the display showing the DMX address flashes, then one of the following errors has
occurred:
- DMX signal not present
- DMX reception problem
For Installations where long distance DMX cable connections are needed, we
suggest to use a DMX terminator.
The DMX terminator is a male XLR 3-5 pins connector with a 120 ohm resistor
Between pin 2 and 3.
The DMX terminator must be plugged into the last unit (DMX out panel connector) of
the DMX line.
5
1
4
2
3
120 ohm
OUT
PLACE A 120 OHM RESISTOR BETWEEN PIN 2
AND 3 OF A MALE XRL CONNECTOR AND PLUG IT
INTO THE DMX OUT PANEL CONNECTOR OF THE
LAST UNIT CONNECTED TO THE DMX LINE
PIN 3
PIN 2
10
8.1 DMX addresses
SCENA LED 80 FC can be controlled with 10 DMX channels (Default).
In order to use the unit in 10 DMX channels mode, set the following addresses on the
mixer:
Projector 1
Projector 2
Projector 3
….. A….
projector 6
A001
A011
A021
If you want to select the next projector, just add “10”
A051
8.2 Selecting the DMX address
1) Press the UP-DOWN key until you reach the required DMX address. The numbers
on the display will start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop
flashing and the projector is now controlled by the new DMX address.
TIPS: if you keep pushed the UP or DOWN keys, the channels are calculated more
quickly and you get a faster selection.
2) Press ENTER to confirm your selection. The numbers on the display will stop
flashing and the projector is now controlled by the new DMX address.
9- FIRMWARE UPDATING
To update the software version of the SCENA LED 80 FC you need:
- D.T.S. RED BOX interface (D.T.S. Code: 03.LA.008)
- USB-DMX Driver for the D.T.S. RED BOX interface
- “D.T.S. Firmware upgrade utility” program installed on PC
- Latest firmware release available for SCENA LED 80 FC unit
Updating the software version.
Please follow the procedure below to perform the update:
1. Install the D.T.S. RED BOX USB-DMX driver on the PC you will use to update the
unit software.
2. Connect the D.T.S. RED BOX interface to the PC by using a USB cable.
3. Connect the D.T.S. RED BOX interface to the fixture by using a DMX cable.
4. Send the new software version into the unit by using “D.T.S. Firmware upgrade
Utility” program.
11
10- DISPLAY FUNCTIONS
DISPLAY FUNCTIONS
The SCENA LED 80 FC display panel shows all the available functions.
Using these functions, it is possible to change some of the parameters and add some
functions. Changing the D.T.S. setting can vary the functions of the unit so that it does
not respond to the DMX 512 used to control it. Carefully follow the instructions below
before carrying out any variations or selections.
NOTE: the symbol
shows which key has to be pushed to obtain the desired
function.
Software version 5.13
MENU
Up-Down
ENTER
REVERSE DISPLAY
Reverses display's reading depending on
the mounting position (on the ground or
suspended).
Up-Down
Up-Down
ENTER
ENTER
Floor
Position
Suspended
Position
Up-Down
Display
Off
Display
Always on
Up-Down
DISPLAY STAND-BY
To turn off the display (after 5 seconds)
Or leave it always on.
MENU
Up-Down
ENTER
Up-Down
DMX MODE
To select DMX mode: 10 DMX channels
mode (default), 6 DMX channel mode,
15 DMX channels mode, “WALL” mode,
“M4CH” mode, “RGBA” mode or 1 DMX
channel mode.
ENTER
ENTER
ENTER
ENTER
ENTER
MACRO
MACRO Function, enable channel mapping
macro rainbow effects
STD (default)
ENTER
Up-Down
Up-Down
ENTER
ENTER
ENTER
Default DMX Mode
10 Channels
6 DMX channels mode
15 DMX channels mode
“WALL” (6 channels mode)
“M4CH” (5 channels mode)
“RGBA” (4 channels mode)
ENTER
ENTER
ENTER
ENTER
Up-Down
ENTER
ENTER
1 channel mode
Standard mode enabled:
(Default).
Extended mode enabled:
Rainbow effects on
MACRO channel.
12
MENU
Up-Down
ENTER
LED
RGBW Min/Max, Smooth,
Compression, Sync and Boost level
values settings
RGBW MINIMUM VALUE
This menu allows to select the
minimum levels for Red, Green,
Blue and White
RGBW MAXIMUM VALUE
This menu allows to select the
maximum levels for Red, Green,
Blue and White
These settings have priority
on Master Dimmer channel
SMOOTH VALUE
This menu allows to select the value
of the delay (in milliseconds) for
Dimmer channel reaction to DMX
or Program variation.
Off = 25 ms Instant response to
DMX variation.
20 = 250 ms Smooth response to
DMX variation.
COMPRESSION
This menu allows to select between
Linear current output or Quadratic
current output for LEDs
Default = Quadratic
SYNC
This menu allows to adjust the PWM
frequency value (Hz) in order to
reduce flickering in the process of
your camera recordings
BOOST DRIVING
This menu allows to increase the
LED’s current from 350mA to
500mA
Up-Down
ENTER
Up-Down
Range: 0-100
ENTER
ENTER
Up-Down
Up-Down
ENTER
ENTER
Up-Down
Up-Down
Up-Down
ENTER
Up-Down
Up-Down
ENTER
Up-Down
Range = Off-20
Default = 4
Quadratic =
Linear light
output
ENTER
ENTER
Linear = Linear
Current output
ENTER
Range =
610 Hz – 20 KHz
Default = 610 Hz
ENTER
Boost mode
activated
ENTER
Boost mode
deactivated
ENTER
With BOOST active, the LED’S
current is set to Max value.
(30% more gain compared to
BOOST Off)
Default = Disabled
13
MENU
Up-Down
ENTER
ENTER
AUTOMATIC MODE
Automatic demo game without DMX controller
Up-Down
ENTER
Up-Down
ENTER
ENTER
Up-Down
ENTER
ENTER
Up-Down
ENTER
ChPr
Chase with 16 steps previously created in REC
MODE
Speed and Wait time selectable by user
CUPr
RGBW values selectable by user
Rainbow (rAIn)
Rainbow colours effect.
Speed time selectable by user
ENTER
Up-Down
ENTER
CU01-CU16
Color Macros as on DMX channel 9 (MACRO)
WHITE MACROS
16 macros for White color from 2800K to 6500K
DIMMER
Dimmer level selectable by user as on DMX
channel 2 (DIMMER)
Dimmer level is active for all the programs and
macros
ENTER
Up-Down
ENTER
SHUTTER
Shutter level selectable by user as on DMX
channel 1 (SHUTTER)
Shutter level is active only for CU01/CU16 and
Wh01/Wh16 macros
ESC
Esc from Automatic Mode Menu
ENTER
ENTER
MENU
Up-Down
ENTER
REC MODE
In DMX Recorder Mode,it is possible to
create and store the scenes of the ChPr by
using an external DMX controller.
The unit must be set to 10 channels mode.
ENTER
Up-Down
Up-Down
ENTER
ENTER
14
DMX Recorder Mode
For the programming of ChPr by using a DMX controller, besides the 10 channels necessary to control the unit a
further 3 DMX channels are needed.
So that in RECORDER mode (via DMX) the unit will need 13 channels to be correctly programmed.
The three new DMX channels are:
DMX channel 11 = SCENES channel
From 0-10 = no function (r001)
From 11-255 are displayed the programmable scenes (max 16 scenes from M001 to M0016)
DMX channel 12 = EDIT channel:
-From 0-19 = no function
-From 20-234 the unit runs the configuration given by the received input DMX values.
With the channel SCENES it is possible to pass from one step to the next while with REC it is possible to record
the selected scene.
-From 235-255 the unit runs the configuration given by the received input DMX values closing the sequence as
last scene.
With the channel REC it is possible to record the selected scene as last scene.
DMX channel 13 = RECORDING channel
Records the set scene with a variation between 0 to 255 (the display flashes indicating that the scene has been
recorded).It is advised that you keep the REC channel set to 0 and to run through the 255 only once you have
decided to save the scene. If ChPr is not closed, by indicating the last scene ( Edit channel between 235-255), in
playback mode all 16 scenes will be played through even if not programmed
MENU
Up-Down
ENTER
ENTER
Up-Down
Up-Down
SLAVE MODE
Slave mode for ChPr program.
All slave units will be synchronised
with master unit, running their own
Chpr program.
MENU
Up-Down
INFRARED MODE
Infrared remote control.
By activating Ir Mode, it will be
possible to navigate trought the unit
functions by using the D.T.S.
infrared remote control
(D.T.S. Code: 0514L008)
ENTER
Up-Down
ENTER
Note:
External infrared remote sensor
needed (D.T.S. Code: 03.LA.016)
ENTER
NOT IMPLEMENTED ON SCENA LED 80 FC
15
MENU
Up-Down
ENTER
Up-Down
ENTER
ENTER
Up-Down
WIRELESS DMX
Wireless DMX enabled / disabled.
By activating WDMX MODE, it will be
possible to control SCENA LED 80 FC
via D.T.S. ANTENNA Wireless DMX
Transmitter (cod. 03.E1271).
Active only on SCENA LED 80 FC with
Wireless on board
ENTER
ENTER
Wireless
Enabled
Wireless
Disabled
UNLINK = LOG OUT
Logging on SCENA LED 80 FC (WIRELESS DMX must be enabled on SCENA LED 80 FC unit)
To log on the SCENA LED 80 FC in the WIRELESS system simply press and quickly release the function
button on the transmitter.
The transmitter will start flashing rapidly red/green scanning for new free receivers / SCENA LED 80 FC units.
When a SCENA LED 80 FC logs on to the transmitter the LINK green light on transmitter starts to flash
rapidly.
After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data.
The SCENA LED 80 FC now try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is seen on the
transmitter and solid display is seen on SCENA LED 80 FC.
2. No DMX signal connected, the Antenna transmitter will flash red/green; display blinking on SCENA LED 80
FC.
To log SCENA LED 80 FC off from a transmitter simply select UNLINK function
under
WIRELESS DMX MENU
and press ENTER.
When SCENA LED 80 FC is logged off, the display is blinking, meaning its available for log in on a new
transmitter.
Logging out a SCENA LED 80 FC
Select UNLINK function
under WIRELESS DMX MENU
and press ENTER.
When SCENA LED 80 FC is logged off the display is blinking, meaning its available for log in on a new
transmitter.
Logging out all SCENA LED 80 FC units linked to a transmitter
Press and hold the function button of the transmitter for about 3 seconds . When the display is blinking on
SCENA LED 80 FC, it mean that the units are logged out.
Transmitter, Status LED
Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast flashing red/green, log in mode (every free SCENA LED 80 FC unit, not logged in to any other transmitter,
will be logged on)
SCENA LED 80 FC Status
Display blinking = not logged on to a transmitter (free).
Solid display = logged on to a transmitter and receiving dmx data.
16
MENU
Up-Down
ENTER
Up-Down
ENTER
EMERGENCY
Emergency operating mode.
By setting Emergency mode, it
will be possible to select
Dimmer intensity level that will
then ran if DMX signal is
missing or not available.
Usefull for Emergency EXIT
illumination on public areas.
MENU
Up-Down
Up-Down
ENTER
ENTER
ENTER
ENTER
ENTER
DEFAULT SETTING
To restore default settings
MENU
Up-Down
.
ENTER
ENTER
TEMPERATURE
Internal unit temperature
visualisation
MENU
Up-Down
ENTER
ENTER
Up-Down
LIFE TIME
This menu shows the total unit life
time and the LED life time
ENTER
ENTER
ENTER
ENTER
MENU
Up-Down
SOFTWARE
Software version
ENTER
. .
Internal unit temperature
(° Celsius)
Default = OFF
17
11- DMX PROTOCOL
10 CHANNELS MODE (Default)
1
2
3
4
5
6
7
8
9
10
SHUTTER
DIMMER
RED
GREEN
BLUE
WHITE
WHITE PRE-PROGRAMMED
CTC
MACRO
FUNCTIONS
DMX CHANNEL
1
DMX range
Value
Mid Point
DMX
value
5
14
24
000-009
010-019
020-029
030-119
Parameter: SHUTTER
Move Range
(degrees)
Mode
Black-out
Open
Black-out
Strobe at variable speed from slow
to fast (3,27 s – 30 ms)
Pulse open at variable speed from
slow to fast (42,6 s – 120 ms)
Pulse close at variable speed from
slow to fast (42,6 s – 120 ms)
Random Strobe
Full Independent Random Strobe
Red, Yellow, Cyan and Blue colour
effects at variable speed
Open
120-149
150-179
180-204
205-229
230-234
192
218
235-255
245
DMX CHANNEL
2
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
Function
Option
Parameter: DIMMER
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
dimmer
3
Parameter: RED
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
4
Parameter: GREEN
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
18
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
5
Parameter: BLUE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Proportional
colour
6
Parameter: WHITE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
7
Parameter: WHITE PRE-PROGRAMMED
Mid Point DMX
value
23
80
106-155
130
Move Range
(degrees)
Mode
Option
206-255
225
IF CHANNEL 10 (FUNCTIONS) = CUSTOM WHITE CREATE (DMX range value 080-160)
156-205
180
206-255
225
8
Function
No Function
Full (Red-GreenBlue at Full)
White DTS
IF CHANNEL 10 (FUNCTIONS) = CUSTOM WHITE RECALL (DMX range value 000-079)
156-205
180
DMX range
Value
Function
Proportional
colour
DMX range
Value
000-055
056-105
DMX CHANNEL
Function
Custom White
Recall
White CTC
(Channel 8 CTC
enabled 256
color temp.
Correction
Macros: 2800°K
– 6500°K)
Custom White
Create (RGB
levels selectable
by DMX)
White CTC
(Channel 8 CTC
enabled 256
color temp.
Correction
Macros: 2800°K
– 6500°K)
Parameter: CTC (Colour Temperature Correction)
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
IF CHANNEL 7 (WHITE PRE-PROGRAMMED) = WHITE CTC (DMX range value 206-255)
000-255
256 colour temp. Correction
Macros: 0=2800°K / 128=4500°K
/ 255=6500°K
IF CHANNEL 7 (WHITE PRE-PROGRAMMED) = NO FUNCTION (DMX range value 000-055)
000-255
NO FUNCTION
19
DMX CHANNEL
9
Parameter: MACRO
PLEASE CHECK PAGE 11
IF:
DMX range
Value
000-014
015-029
030-044
045-059
060-074
075-089
090-104
105-119
120-134
135-149
150-164
165-179
180-194
195-209
210-225
226-239
240-255
Mid Point
DMX value
DMX CHANNEL
9
Move Range
(degrees)
Mode
Option
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Parameter: MACRO
PLEASE CHECK PAGE 11
IF:
DMX range
Value
000-014
015-022
023-030
031-038
039-046
047-054
055-062
063-070
071-078
079-086
087-094
095-102
103-110
111-118
119-126
127-134
135-142
143-150
151-158
159-166
167-174
175-182
183-190
191-198
199-206
207-214
215-222
223-230
231-238
239-246
247-255
Function
Mid Point
DMX value
Move Range
(degrees)
Mode
Option
Function
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Rainbow Speed 1 (1 Sec.)
Raibow Speed 2 (5 Sec.)
Rainbow Speed 3 (10 Sec.)
Rainbow Speed 4 (20 Sec.)
Rainbow Speed 5 (30 Sec.)
Rainbow Speed 6 (60 Sec.)
Rainbow Speed 7 (120 Sec.)
Rainbow Speed 8 (180 Sec.)
Random Speed 1 (0,5 Sec.)
Random Speed 2 (1 Sec.)
Random Speed 3 (2 Sec.)
Random Speed 4 (5 Sec.)
Random Speed 5 (10 Sec.)
Random Speed 6 (30 Sec.)
20
DMX CHANNEL
DMX range
Value
000-079
10
Parameter: FUNCTIONS (Recall, Create and Store the Custom white)
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Custom White
Recall (Enable
CH 7 for Custom
white Recall)
Custom White
Create (Enable
CH 7 for Custom
white Creation)
Custom White
Store (Store the
Custom White
created)
080-160
161-255
“WALL” 6 CHANNELS MODE
(For use with DTS Wall mounted DMX controller 0514L007)
MENU
1
2
3
4
5
6
Up-Down
ENTER
Up-Down
6 CHANNELS
ENTER
GREEN
RED
BLUE
DIMMER
NOT USED
SHUTTER
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
1
Parameter: GREEN
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
2
Parameter: RED
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
3
Parameter: BLUE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
21
DMX CHANNEL
4
DMX range
Value
000-255
Mid Point DMX
value
Move Range
(degrees)
Mode
Function
Option
Proportional
dimmer
DMX CHANNEL
5
DMX range
Value
000-255
Parameter: NOT USED
Mid Point DMX
value
Move Range
(degrees)
Mode
Function
Option
No Function
DMX CHANNEL
6
DMX range
Value
Mid Point
DMX
value
5
14
24
000-009
010-019
020-029
030-119
Parameter: DIMMER
Parameter: SHUTTER
Move Range
(degrees)
Mode
Black-out
Open
Black-out
Strobe at variable speed from slow
to fast (3,27 s – 30 ms)
Pulse open at variable speed from
slow to fast (42,6 s – 120 ms)
Pulse close at variable speed from
slow to fast (42,6 s – 120 ms)
Random Strobe
Full Independent Random Strobe
Red, Yellow, Cyan and Blue colour
effects at variable speed
Open
120-149
150-179
180-204
205-229
230-234
192
218
235-255
245
Function
Option
“M4CH” 5 CHANNELS MODE
1
2
3
4
5
DIMMER
RED
GREEN
BLUE
WHITE
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
1
Parameter: DIMMER
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
dimmer
2
Parameter: RED
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
22
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
3
Parameter: GREEN
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
4
Parameter: BLUE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
5
Parameter: WHITE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
4 CHANNELS MODE
1
2
3
4
RED
GREEN
BLUE
WHITE
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
1
Parameter: RED
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
2
Parameter: GREEN
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
3
Parameter: BLUE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
4
Parameter: WHITE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
23
1 CHANNEL MODE
1
DIMMER
DMX CHANNEL
DMX range
Value
000-255
1
Parameter: DIMMER
Mid Point DMX
value
Move Range
(degrees)
Mode
Function
Option
Proportional
Dimmer
15 CHANNELS MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
SHUTTER
DIMMER
DIMMER FINE
RED
RED FINE
GREEN
GREEN FINE
BLUE
BLUE FINE
WHITE
WHITE FINE
WHITE PRE-PROGRAMMED
CTC
MACRO
FUNCTIONS
DMX CHANNEL
1
DMX range
Value
Mid Point
DMX
value
5
14
24
000-009
010-019
020-029
030-119
Parameter: SHUTTER
Move Range
(degrees)
Mode
Black-out
Open
Black-out
Strobe at variable speed from slow
to fast (3,27 s – 30 ms)
Pulse open at variable speed from
slow to fast (42,6 s – 120 ms)
Pulse close at variable speed from
slow to fast (42,6 s – 120 ms)
Random Strobe
Full Independent Random Strobe
Red, Yellow, Cyan and Blue colour
effects at variable speed
Open
120-149
150-179
180-204
205-229
230-234
192
218
235-255
245
DMX CHANNEL
2
DMX range
Value
000-255
Function
Option
Parameter: DIMMER
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
dimmer
24
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
3
Parameter: DIMMER FINE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
Dimmer
4
Parameter: RED
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
5
Parameter: RED FINE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
6
Parameter: GREEN
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
7
Parameter: GREEN FINE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
8
Parameter: BLUE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
9
Parameter: BLUE FINE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Proportional
colour
25
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
DMX range
Value
000-255
DMX CHANNEL
10
Parameter: WHITE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Proportional
colour
11
Parameter: WHITE FINE
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
12
Parameter: WHITE PRE-PROGRAMMED
Mid Point DMX
value
23
80
106-155
130
Move Range
(degrees)
Mode
Option
206-255
225
IF CHANNEL 15 (FUNCTIONS) = CUSTOM WHITE CREATE (DMX range value 080-160)
156-205
180
206-255
225
13
Function
No Function
Full (Red-GreenBlue at Full)
White DTS
IF CHANNEL 15 (FUNCTIONS) = CUSTOM WHITE RECALL (DMX range value 000-079)
156-205
180
DMX range
Value
Function
Proportional
colour
DMX range
Value
000-055
056-105
DMX CHANNEL
Function
Custom White
Recall
White CTC
(Channel 13
CTC enabled
256 color temp.
Correction
Macros: 2800°K
– 6500°K)
Custom White
Create (RGB
levels selectable
by DMX)
White CTC
(Channel 13
CTC enabled
256 color temp.
Correction
Macros: 2800°K
– 6500°K)
Parameter: CTC (Colour Temperature Correction)
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
IF CHANNEL 12 (WHITE PRE-PROGRAMMED) = WHITE CTC (DMX range value 206-255)
000-255
256 colour temp. Correction
Macros: 0=2800°K / 128=4500°K
/ 255=6500°K
IF CHANNEL 12 (WHITE PRE-PROGRAMMED) = NO FUNCTION (DMX range value 000-043)
000-255
NO FUNCTION
26
DMX CHANNEL
14
Parameter: MACRO
PLEASE CHECK PAGE 11
IF:
DMX range
Value
000-014
015-029
030-044
045-059
060-074
075-089
090-104
105-119
120-134
135-149
150-164
165-179
180-194
195-209
210-225
226-239
240-255
DMX CHANNEL
Mid Point
DMX value
Move Range
(degrees)
Mode
Option
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
14
Parameter: MACRO
PLEASE CHECK PAGE 11
IF:
DMX range
Value
000-014
015-022
023-030
031-038
039-046
047-054
055-062
063-070
071-078
079-086
087-094
095-102
103-110
111-118
119-126
127-134
135-142
143-150
151-158
159-166
167-174
175-182
183-190
191-198
199-206
207-214
215-222
223-230
231-238
239-246
247-255
Function
Mid Point
DMX value
Move Range
(degrees)
Mode
Option
Function
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Rainbow Speed 1 (1 Sec.)
Raibow Speed 2 (5 Sec.)
Rainbow Speed 3 (10 Sec.)
Rainbow Speed 4 (20 Sec.)
Rainbow Speed 5 (30 Sec.)
Rainbow Speed 6 (60 Sec.)
Rainbow Speed 7 (120 Sec.)
Rainbow Speed 8 (180 Sec.)
Random Speed 1 (0,5 Sec.)
Random Speed 2 (1 Sec.)
Random Speed 3 (2 Sec.)
Random Speed 4 (5 Sec.)
Random Speed 5 (10 Sec.)
Random Speed 6 (30 Sec.)
27
DMX CHANNEL
DMX range
Value
000-079
080-160
161-255
15
Parameter: FUNCTIONS (Recall, Create and Store the Custom white)
Mid Point DMX
value
Move Range
(degrees)
Mode
Option
Function
Custom White
Recall (Enable
CH 12 for
Custom white
Recall)
Custom White
Create (Enable
CH 12 for
Custom white
Creation)
Custom White
Store (Store the
Custom White
created)
28
The information contained in this publication has been carefully prepared and
checked. However, no responsibility will be taken for any errors. All rights are reserved
and this document cannot be copied, photocopied or reproduced, in part or
completely, without prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to
any of its products without prior notice. D.T.S. assumes no responsibility for the use or
application of the products or circuits described herein.
MADE IN ITALY
ISO 9001:2008
D.T.S. quality system
is certified to the
ISO 9001:2008 standard
D.T.S. products are designed
and manufactured at the D.T.S.
plants in italy
*0517I243*
0517I243
D.T.S. Illuminazione s.r.l. – Via Fagnano Selve 10-12-14 47843
Misano Adriatico (RN) Italia
Tel.: +39 0541 611131. Fax + 39 0541 611111
info@dts-lighting.it www.dts-lighting.it
Download PDF