Community V2-8 Spec sheet

Community V2-8 Spec sheet

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Community V2-8 Spec sheet | Manualzz

V2-8

TWO-WAY, FULL-RANGE

COMPACT LOUDSPEAKER SYSTEM

SPECIFICATIONS

Loudspeaker Type:

Compact two-way, full-range, trapezoidal, vented bass, user rotatable horn

Operating Range: 70 Hz to 18 kHz (-10 dB)

Frequency Response: 100 Hz to 16 kHz (±3 dB)

Max Input Ratings:

150W continuous, 375W program

34.6 volts RMS, 69.2 volts momentary peak

Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space

Maximum Output: 114 dB SPL / 120 dB SPL (peak)

Nominal Impedance: 8 ohms

Minimum Impedance: 6.1 ohms @ 180 Hz

Nominal –6dB

Beamwidth:

90° H x 70° V (in vertical position)

Crossover Frequency: 1.3 kHz

Recommended Signal

Processing:

90 Hz, 24 dB/octave Butterworth high pass filter

Drivers:

LF 1 x 8-inch cone

HF 1 x 1-inch

Driver Protection: DYNA-TECH protection circuitry

Input Connection:

NL4-compatible locking connector with terminal strip in parallel

Controls: None

Enclosure:

Trapezoidal (22.5° included angle)

18mm, 11-ply cross-laminated birch

Mounting/Rigging

Provisions:

9 x M6 threaded rigging fittings

4 x M6 threaded fittings for V-HSS and

third-party suspension products

Finish:

Catalyzed polyester two-part paint, black or white

Grille: Powder coated steel, black or white finish

Required Accessories: None

Supplied Accessories:

Yoke-style mounting bracket with optional

10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt

Optional Accessories:

CMKIT ceiling mount kit

V-HSS handle and stand socket

VB-TILT tilting bracket

VB-VY8 vertical yoke bracket

M6EYBLTKIT 6mm eyebolt kit

Dimensions—Height:

Width:

Depth:

17 inches (433 mm)

11.3 inches (287 mm)

11.7 inches (298 mm)

Weight (incl. bracket):

25.3 lbs (11.5 kg)

27.3 lbs (12.5 kg) with autoformer

Model Options:

V2-8B (low impedance, black finish)

V2-8W (low impedance, white finish)

V2-8BT (built-in autofomer for 70V100V

applications, black finish)

V2-8WT (built-in autofomer for 70V100V

applications, white finish)

NOTES:

1. Sensitivity: Free field pink noise measurement at 6ft (1.8m) at 10% power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

VERIS 2

APPLICATIONS

Restaurants, pubs, cafés

Houses of worship

Shopping malls, retail environments

Airports

Delay fill

FEATURES

DYNA-TECH™ driver protection circuitry

Ferrofluid-treated HF driver for improved heat dissipation

Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability

Constant-directivity rotatable square horn

Terminal strip and NL4-compatible connectors

Available in standard black or white finishes

Mounting yoke included with 10° and 20° vertical standoffs

Optional V2-8T autoformer model for 70V/100V applications

DESCRIPTION

The V2-8 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-8 system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-8 is also an excellent choice for ancillary delay applications. When used to augment a front-of-house system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-8 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-8 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.

An optional model with a built-in 100W autoformer with taps at

100W, 50W, 25W and 12.5W (model V2-8T) is also available from the factory.

V2-8

TWO-WAY, FULL-RANGE

COMPACT LOUDSPEAKER SYSTEM

FREQUENCY RESPONSE IMPEDANCE

BEAMWIDTH AXIAL Q

DIMENSIONS

YOKE

11.292" [286.81]

1.969"[50]

6.468" [164.29]

CG

8.000" [203.2]

SIDES

17.441" [443]

17.043" [432.89]

FRONT

CG

4.250" [107.95]

4.609" [117.07]

2.000" [50.8]

BACK

6.854" [174.09]

(5) M6 HANG POINTS

(TYP)

11.723" [297.76]

1.000" [25.4]

TO HANG POINT

(TYP)

1.218"

[30.94]

1.809" [45.95]

1.218" [30.94]

11.25°

11.155" [283.33]

4.687"

[119.04]

1.977" [50.21]

(4) M6 HANG POINT

(TYP)

TOP/BOTTOM

28.350"[720.09]R

ARCHITECTURAL SPECIFICATIONS

The loudspeaker system shall be a compact two-way, full-range, trapezoidal vented bass design with one 8-inch low frequency cone driver and one 1-inch HF driver mounted to a rotatable 90° H x 70° V square horn. There shall be an NL4-compatible locking connector with terminal strip in parallel. The loudspeaker enclosure shall be constructed of 18mm, 11-ply cross laminated birch with a perforated steel grille and shall be fitted with thirteen M6 flying/rigging inserts. A steel mounting yoke with 10° and 20° vertical standoffs shall be included. The system shall have an amplitude response of 70 Hz to 18 kHz (-10 dB) and input capability of 34.6V RMS. The sensitivity at 1W/1m shall be 92 dB (100 Hz to 12.5 kHz). The nominal dispersion shall be 90° H x 70° V in vertical orientation. The loudspeaker dimensions shall be 17 in. (433 mm) H x 11.3 in. (287 mm) W (front) x 6.9 in. (174 mm) W (rear) X 17 in. (433 mm) D. The loudspeaker system and included mounting yoke assembly combined shall weigh 25.3 lbs (11.5 kg).

Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.

Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA

610-876-3400 · Fax 610-874-0190 · [email protected] · www.communitypro.com

V2-8 [5FEB2013]

advertisement

Related manuals

Download PDF

advertisement