Datel | DKT2104-CT | User guide | Datel DKT2104-CT User guide

Datel DKT2104-CT User guide
Telecommunication Systems Division
Digital Business Telephone Systems
System Administrator Guide
May 2000
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
Limited Warranty
Toshiba America Information Systems, Inc., (“TAIS”) warrants that this telephone equipment (except for fuses, lamps, and other
consumables) will, upon delivery by TAIS or an authorized TAIS dealer to a retail customer in new condition, be free from defects in
material and workmanship for twelve (12) months after delivery. This warranty is void (a) if the equipment is used under other than
normal use and maintenance conditions, (b) if the equipment is modified or altered, unless the modification or alteration is expressly
authorized by TAIS, (c) if the equipment is subject to abuse, neglect, lightning, electrical fault, or accident, (d) if the equipment is
repaired by someone other than TAIS or an authorized TAIS dealer, (e) if the equipment’s serial number is defaced or missing, or (f) if
the equipment is installed or used in combination or in assembly with products not supplied by TAIS and which are not compatible or
are of inferior quality, design, or performance.
The sole obligation of TAIS or Toshiba Corporation under this warranty, or under any other legal obligation with respect to the
equipment, is the repair or replacement by TAIS or its authorized dealer of such defective or missing parts as are causing the
malfunction with new or refurbished parts (at their option). If TAIS or one of its authorized dealers does not replace or repair such parts,
the retail customer’s sole remedy will be a refund of the price charged by TAIS to its dealers for such parts as are proven to be defective,
and which are returned to TAIS through one of its authorized dealers within the warranty period and no later than thirty (30) days after
such malfunction, whichever first occurs.
Under no circumstances will the retail customer or any user or dealer or other person be entitled to any direct, special, indirect,
consequential, or exemplary damages, for breach of contract, tort, or otherwise. Under no circumstances will any such person be
entitled to any sum greater than the purchase price paid for the item of equipment that is malfunctioning.
To obtain service under this warranty, the retail customer must bring the malfunction of the machine to the attention of one of TAIS’
authorized dealers within the twelve (12) month period and no later than thirty (30) days after such malfunction, whichever first occurs.
Failure to bring the malfunction to the attention of an authorized TAIS dealer within the prescribed time results in the customer being
not entitled to warranty service.
THERE ARE NO OTHER WARRANTIES FROM EITHER TOSHIBA AMERICA INFORMATION SYSTEMS, INC., OR
TOSHIBA CORPORATION WHICH EXTEND BEYOND THE FACE OF THIS WARRANTY. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, AND FITNESS FOR USE, ARE EXCLUDED.
No TAIS dealer and no person other than an officer of TAIS may extend or modify this warranty. No such modification or extension is
effective unless it is in writing and signed by the vice president and general manager, Telecommunication Systems Division.
Publication Information
Toshiba America Information Systems, Inc., Telecommunication
Systems Division, reserves the right, without prior notice, to
revise this information publication for any reason, including, but
not limited to, utilization of new advances in the state of
technical arts or to simply change the design of this document.
Further, Toshiba America Information Systems, Inc.,
Telecommunication Systems Division, also reserves the right,
without prior notice, to make such changes in equipment design
or components as engineering or manufacturing methods may
warrant.
DKA-AG-SYSTEMVD
4016160
Version D.1, May 2000
Version D, July 1999
Version C, April 1998
Version B, October 1997
Version A, September 1996
© Copyright 2000
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
All rights reserved. No part of this manual, covered by the
copyrights hereon, may be reproduced in any form or by any
means—graphic, electronic, or mechanical, including recording,
taping, photocopying, or information retrieval systems—without
express written permission of the publisher of this material.
Strata is a registered trademark of Toshiba Corporation.
Trademarks, registered trademarks, and service marks are the
property of their respective owners.
Contents
Introduction
Equipment Notes ................................................................................................................iv
Organization .......................................................................................................................iv
Conventions ........................................................................................................................v
Action/Response Table ......................................................................................................vi
Important Notes .................................................................................................................vi
Related Documents and Media ........................................................................................ vii
Chapter 1 – Setting System Parameters
Auto Attendant ....................................................................................................................2
Auto Attendant CO Line Assignments ............................................................................2
System Auto Attendant Dialing Plan ...............................................................................3
Auto Attendant Announcement Recording Recommendations .......................................4
Direct Inward System Access (DISA) Security Code ........................................................5
Emergency 911 Calls ..........................................................................................................6
Emergency Calling from the Attendant Console .............................................................8
Night Transfer .....................................................................................................................9
Night Transfer Lock/Unlock Password ...........................................................................9
Night Transfer Lock Mode ............................................................................................11
Setting Date/Time/Day .....................................................................................................12
Soft Keys ...........................................................................................................................14
Station Relocation .............................................................................................................14
Strata DK System Administrator Guide 5/00
i
Contents
Chapter 1 - Setting System Parameters
Automatic Relocation ....................................................................................................15
Relocation by Special Dial ............................................................................................16
System Messages, Names and Memos .............................................................................18
User LCD Name/Number Display .................................................................................19
System Speed Dial Numbers ............................................................................................23
Clearing a Speed Dial Entry ..........................................................................................23
Accessing the Stored Number .......................................................................................24
Speed Dial—Advanced Features ......................................................................................24
Feature Access Codes ....................................................................................................24
Speed Dial Pause and Flash Storage ..............................................................................28
Speed Dial Number Linking ..........................................................................................28
Speed Dial Memo ..........................................................................................................31
Toll Restriction Override/Traveling Class Codes .............................................................34
Verified Account Codes ....................................................................................................36
Appendix A – Access Codes
CO Line Access Codes .....................................................................................................39
Feature Access Codes .......................................................................................................40
Paging Group Codes .........................................................................................................41
Speed Dial Access Codes ..................................................................................................42
Appendix B – Directories/Record
User Name/Number Directory ..........................................................................................43
Speed Dial Memo Directory .............................................................................................44
Telephone Location Record ..............................................................................................45
Index .....................................................................................................................................47
ii
Strata DK System Administrator Guide 5/00
Introduction
This guide is designed for the System Administrator of the following Strata DK
systems:
♦
DK14
♦
DK16e and DK16
♦
DK40i and DK40
♦
DK424i, DK424 and DK280 (Release 3 and above)
This guide provides instructions for assigning the user names that appear on the
station display; managing station relocation; and assigning Direct Inward System
Access (DISA) security codes, toll restriction override access codes, and verified
account codes.
Important!
This guide contains information and procedures that are not available
to the average telephone user. As System Administrator, you must have
access to a specific System Administrator’s telephone to perform the
procedures in this guide. You are responsible for certain proprietary
codes for providing or restricting features to telephones with the Strata
DK systems. This guide is not intended for general use; please keep it in
a secure place.
You should also have a copy of the most recent Strata DK General Description for the
appropriate system, as well as any related user guides. See “Related Documents/
Media” later in this Introduction.
Strata DK System Administrator Guide 5/00
iii
Introduction
Equipment Notes
Equipment Notes
♦
Most of the operations in this guide require a Liquid Crystal Display (LCD)
digital telephone at the System Administrator’s work station.
♦
Typically, use the station with [PDN] 10, 100, or 200 to perform the functions in
this guide. This guide assumes the Adminstrator’s telephone is connected to
station Port 000. If you wish, you can use a different [PDN] which must be
assigned by the system installer. In any case, the station is referred to as the
“Administrator station” throughout this guide. Ask your system installer which
station this is.
Organization
This guide is divided as follows:
iv
♦
Chapter 1 – Setting System Parameters contains descriptions and procedures
for changing System Administrator-specific parameters. These parameters are
given in alphabetical order.
♦
Appendix A – Access Codes provides feature access code sequences which can
be stored onto SD buttons for one-touch feature access.
♦
Appendix B – Directories/Record provides blank directories for recording User
Names/Numbers and Speed Dial memos, and telephone locations and instructions
for displaying [DN], physical port, and logical port information.
Strata DK System Administrator Guide 5/00
Introduction
Conventions
Conventions
Conventions
Note
Description
Elaborates specific items or references other information.
Within some tables, general notes apply to the entire table and
numbered notes apply to specific items.
Important!
Calls attention to important instructions or information.
CAUTION!
Advises you that hardware, software applications, or data
could be damaged if the instructions are not followed
closely.
WARNING!
Alerts you when the given task could cause personal injury
or death.
[DN]
Represents any Directory Number button, also known as an
extension or intercom number.
[PDN]
Represents any Primary Directory Number button (the
extension number for the telephone).
[SDN]
Represents any Secondary appearance of a PDN. A PDN which
appears on another telephone is considered an SDN.
[PhDN]
Represents any Phantom Directory Number button (an
additional DN).
$ULDO%ROG
Courier
Helvetica Bold
Represents telephone buttons.
Shows a computer keyboard entry or screen display.
Represents LCD displays, tokens or custom IVR functions. For
example: M ( ).
“Type”
Indicates entry of a string of text.
“Press”
Indicates entry of a single key. For example: Type prog then
press Enter.
Strata DK System Administrator Guide 5/00
v
Introduction
Action/Response Table
Conventions
Description
Plus (+)
Shows a multiple PC keyboard or phone button entry. Entries
without spaces between them show a simultaneous entry.
Example: Esc+Enter. Entries with spaces between them
show a sequential entry. Example: # + 5.
Tilde (~)
Means “through.” Example: 350~640 Hz frequency range.
➤
Denotes the step in a one-step procedure.
➤
Denotes a procedure.
See Figure 10
Grey words within the printed text denote cross-references. In
the electronic version of this document (Strata DK Library
CD-ROM or FYI Internet download), cross-references appear
in blue hypertext.
Action/Response Table
➤ The left column gives
you the single or
numbered steps you
need to perform a
procedure.
The right column gives the immediate response to
your action. It includes readouts from the LCD
telephone when applicable, and additional notes and
comments.
Important Notes
vi
♦
Because feature buttons are flexible and must be programmed by a system
installer, your telephone may not have all of the buttons mentioned in this guide.
♦
Use the button if your telephone does not have a 5HGLDO button.
♦
Use the button if your telephone does not have a 6SHHG'LDO button.
Strata DK System Administrator Guide 5/00
Introduction
Related Documents and Media
Related Documents and Media
Note
Some documents listed here may appear in different versions on the
CD-ROM, FYI, or in print. To find the most current version, check the
version/date in the Publication Information on the back of the document’s title
page.
Refer to the following documents for more information:
♦
Strata DK General Description
♦
Strata DK Feature Description Manual
♦
Digital Telephone User Guide
♦
Digital Telephone Quick Reference Guide
♦
Digital Single Line Telephone User Guide
♦
Electronic Telephone User Guide
♦
Electronic Telephone Quick Reference Guide
♦
Standard Telephone User Guide
♦
Strata AirLink External Wireless Handset User Guide
♦
Strata AirLink External Wireless Quick Reference Guide
♦
Strata AirLink Integrated Wireless Handset User Guide
♦
Strata AirLink Integrated Wireless Quick Reference Guide
♦
PC/Data Interface User Guide
♦
DKT2004-CT Cordless Telephone User Guide
♦
DKT2104-CT Cordless Telephone User Guide
♦
PC-DKT User Guide
Strata DK System Administrator Guide 5/00
vii
Introduction
Related Documents and Media
♦
Hospitality Management Information System (HMIS) General Description
♦
Hospitality Management Information System (HMIS) User Guide
♦
Strata DK Library CD-ROM
For authorized users, Internet site FYI (http://fyi.tsd.toshiba.com) contains all current
Strata DK documentation and enables you to view, print, and download current
publications.
viii
Strata DK System Administrator Guide 5/00
Setting System Parameters
1
For security reasons, you can add, delete or change system parameters. Make sure
your system is programmed so that you can change these parameters from your
telephone.
The parameters discussed in this chapter are given in alphabetical order. They are:
♦
Auto Attendant
♦
Direct Inward System Access (DISA) Security Code
♦
Night Transfer
♦
Setting Date/Time/Day
♦
Soft Keys
♦
Station Relocation
♦
System Messages, Names and Memos
♦
System Speed Dial Numbers
♦
Toll Restriction Override/Traveling Class Codes
♦
Verified Account Codes
Strata DK System Administrator Guide 5/00
1
Setting System Parameters
Auto Attendant
Auto Attendant
The Auto Attendant feature tells the system where to direct incoming Auto Attendant
calls. The Strata DK built-in Auto Attendant is licensed by Dytel, Inc. under United
States Patent No. 4,975,941. Two announcements greet callers: The primary
announcement contains the company greeting, followed by a menu. The secondary
(optional) announcement, plays when the station or department called is not available.
It is then followed by a menu.
An Auto Attendant’s primary announcement may sound like this:
“Hello, you have reached Toshiba.
If you know the number of the party you are calling, please dial it now.
For operator assistance, dial 0 or please wait.
For Sales, dial 3.
For Marketing, dial 4.
And for Technical Support, dial 5.”
Here’s an example of an Auto Attendant's secondary announcement:
“The party is unavailable...
For operator assistance, dial 0 or wait for assistance.
For Sales, dial 3.
For Marketing, dial 4.
And for Technical Support, dial 5.”
Auto Attendant CO Line Assignments
CO lines can be assigned to be answered by the Auto Attendant in any of the three
system modes (Day, Day 2, and Night) by the system programmer. The 1LJKW
7UDQVIHU button can be used to switch the CO lines to ring the Auto Attendant or to
ring stations that are preassigned in system programming.
The Auto Attendant can be configured (in system programming) to answer CO line
calls on a delayed basis (12 or 24 seconds) if the call is not answered at a ringing
station(s).
2
Strata DK System Administrator Guide 5/00
Setting System Parameters
Auto Attendant
System Auto Attendant Dialing Plan
The Auto Attendant dialing plan is assigned in system programming. Use Table 1 to
record your system Auto Attendant dialing plan. Toshiba recommends using single
digits. (See Table 2 for a list of default [DNs] for Strata DK systems.)
Table 1
Auto Attendant Menu
Dialed Digit
(Menu Prompts)
Station (Directory)
Number
Department, Division, etc.
Table 2
DISA Outgoing Calls
Outgoing line (see Caution note below)
Default DNs for Strata DK
[PDNs] (default)
[PhDNs] (default)
DK14
System
a
a
DK16, DK16e, DK40, DK40i
a
a
DK424 (RCTUBA/BB, RCTUC/D) and
DK424i (B1CU, B2CAU/B2CBU,
B3CAU/B3CBU)
a
a
DK424 (RCTUE/F) and
DK424i (B5CAU/B5CBU)
a
a
Strata DK System Administrator Guide 5/00
3
Setting System Parameters
Auto Attendant
When calling the Auto Attendant, callers can access DISA by dialing . Toshiba
recommends that you do not include this information in the Auto Attendant
announcement.
CAUTION!
Make sure that your system DISA security code is set and protected.
This is necessary to prevent unauthorized outgoing DISA calls from
being charged (billed) to your company’s telephone lines. See the
instructions, “Direct Inward System Access (DISA) Security Code”
on Page 5.
Auto Attendant Announcement Recording Recommendations
Primary announcements are played to the caller when the Auto Attendant first
answers a CO line. Secondary announcements (optional) are played to the caller after
dialing a busy or unanswered station. Announcements should be kept as short as
possible to allow fast call handling, and to eliminate overflow situations. Typical
announcements should run between 10 and 20 seconds. Both primary and secondary
announcements should play the Auto Attendant dialing plan options.
If many CO lines ring the Auto Attendant (heavy traffic), multiple announcement
machines can be installed to accommodate quick answer of incoming calls.
Announcements can be up to 60 seconds in length. The system can support up to four
primary announcements and up to four secondary announcements, thereby making a
15-second call answering time possible. All primary announcements should play the
same message/dial prompts, and all secondary should play the same secondary
announcement. Follow the announcement device manufacturer’s instructions to record
the auto attendant announcements.
4
Strata DK System Administrator Guide 5/00
Setting System Parameters
Direct Inward System Access (DISA) Security Code
Direct Inward System Access (DISA) Security
Code
The Direct Inward System Access feature is used when calling into your system from
the outside. This feature is available on certain CO lines and from the built-in Auto
Attendant. Assignments are made by the system programmer. CO lines can be DISA
lines in the Day, Day 2, or Night mode, or any combination of these modes.
If a caller enters the system via a DISA line or built-in Auto Attendant, the caller can
then access another line to place an outgoing call through the system, in which case
the outgoing line call is charged as a call made from the DK system. To prevent
unauthorized outgoing calls through the system using the DISA feature, enter a DISA
security code as shown in the following steps.
CAUTION!
Whenever the built-in Auto Attendant is installed, the DISA
security code should be used (and changed periodically) to prevent
unauthorized access of outgoing CO lines via the Auto Attendant
DISA access feature.
➤ To enter or change the DISA security code
1. Press [DN] + .
You hear a confirmation tone.
2. Dial the new DISA
security code (1~15
digits).
The DISA security code digit
length is a system program
option. The code appears on
the LCD as you enter it.
3. Press 5HGLDO.
You hear a confirmation tone.
4. Press 6SNU.
The telephone returns to the idle mode.
Strata DK System Administrator Guide 5/00
NO. NNN
____ ID CODE SET
NO. NNN
DATA PROGRAMMED
5
Setting System Parameters
Emergency 911 Calls
➤ To cancel the DISA security code
1. Press [DN] + .
You hear a confirmation tone.
2. Press 5HGLDO.
The telephone returns to the idle mode.
3. Press 6SNU.
CAUTION!
If the DISA security is canceled, outgoing unrestricted CO Line
access is available to anyone calling in on a DISA line or built-in
Auto Attendant.
Emergency 911 Calls
The procedure to make an emergency 911 call is the same for the Strata DK14, DK40i,
DK40, DK424 and DK424i; however, the DK424 and DK424i can be programmed to
use a special outside line, called the CAMA trunk, which provides Enhanced 911
(E911) calling service.
The DK424 and DK424i’s E911 feature performs the following set of actions when a
user dials 911: the DK seizes an idle CAMA trunk and sends 911 plus the dialing
station’s Caller Emergency Service Identification (CESID) over the CAMA trunk to
the 911 emergency operator. This allows the 911 emergency operator to know the
exact location (room, building, etc.) of the telephone originating the 911 call.
6
Strata DK System Administrator Guide 5/00
Setting System Parameters
Emergency 911 Calls
➤ To make an Emergency 911 call
1. Press [DN] + The [PDN] releases from the internal connection and
seizes the CAMA trunk.
Note Once a 911 call is started, most other buttons/
keys on a telephone are disabled to prevent
accidentally dropping the 911 call attempt. This
includes the +ROG button, so that the 911 call
cannot be put on hold.
...or go off hook and
enter Off Hook and dial 911 (station has off hook selection
of a CO line or line group in Program 32 and has a CO
/LQH or 3RROHG/LQH buttons).
If your off hook selection automatically selects a /LQH
3RROHG/LQH button, then when you dial 911, the
normal CO line is dropped and an idle PDN or CAMA
CO button connects to the CAMA trunk.
If an idle [PDN] or CAMA CO button is not available,
the 911 call is sent out the originally selected line
without the station’s CESID information.
...or press [DN] + +
.
Strata DK System Administrator Guide 5/00
If the system uses Least Cost Routing (LCR) – When
is dialed, the station seizes LCR on its [PDN]. When
you enter , the PDN drops LCR and the same
[PDN] connects to the CAMA trunk. 911 plus the
station’s CESID will be sent out the CAMA trunk.
7
Setting System Parameters
Emergency 911 Calls
If the system does not use LCR or if the station does
not have a CO Line, Pooled Line or CAMA CO
buttons – when a is dialed as an access code, the
station seizes a “dial 9” CO line on its [PDN]. When
is entered, the 911 call will be sent one of two
ways:
♦
If the station does not have another idle [PDN] or
CAMA CO button, the 911 call will be sent out the
normal CO line in the dial 9 line group without the
station’s CESID.
♦
If the telephone has another [PDN] or CAMA CO
button, and it is idle, the first PDN will drop and
the second [PDN] or CAMA CO button will be
connected to the CAMA trunk. 911 plus the
station’s CESID will be sent out the CAMA trunk.
Emergency Calling from the Attendant Console
The PC attendant console and the DK attendant console can be programmed make
E911 calls two different ways, by using either CO line buttons or the INT button to
initiate the call. The procedure and results are described below:
From the attendant console, the Attendant can press:
8
♦
a CO /LQH, 3RROHG/LQH or CAMA CO button and dial 911. When 911 is dialed
from an outgoing line button, the outgoing line button drops and the CAMA trunk
is seized on the INT button. 911 plus the Attendant Console CESID is sent out the
CAMA trunk.
♦
...or the ,17 or [PDN] button and dial 911. When 911 is dialed, the ,17 or [PDN]
releases from the internal connection and seizes the CAMA trunk. 911 plus the
Attendant Console CESID is sent out the CAMA trunk.
Strata DK System Administrator Guide 5/00
Setting System Parameters
Night Transfer
Night Transfer
Incoming calls to your system can be made to route and ring different destinations,
based on either two- or three-call routing (ringing) patterns (set in system
programming). The Night Transfer LED indicates the active routing pattern:
Mode
Three-pattern
Two-pattern
DAY
OFF
OFF
DAY 2
FLASH
N/A
NIGHT
ON
ON
Night Transfer can be locked by pressing 17/RFNa and dialing the NT Lock
password (see the procedure outlined on the following page).
If the system has tenant service, up to four Tenant Night Transfer buttons (1LJKW
7UDQVIHUa) can be assigned and controlled independently.
➤ To enable/disable night transfer
➤ Press 1LJKW7UDQVIHU to toggle night transfer ON/OFF.
Night Transfer Lock/Unlock Password
The Night (NT) Lock/Unlock mode enables the Administrator’s station or an
attendant console to lock the system into the Day, Day 2, or Night mode. By setting
the system into different modes, incoming CO calls can be routed to different
destinations.
In order for the Administrator station or the attendant console to perform such routing,
it must be assigned with 1LJKW7UDQVIHU and 17/RFN buttons via system
programming. Up to four 1LJKW7UDQVIHU and 17/RFNbuttons are allowed.
Check with the system installer for any additional information.
Strata DK System Administrator Guide 5/00
9
Setting System Parameters
Night Transfer
➤ To assign or change Night Lock/Unlock Password
1. Press a [DN] +
The LCD prompts you to
enter a four-digit password.
NO.200
ENTER PASS CODE
2. Enter a four-digit
password.
As you are enter the
password, the digits display
on the LCD.
NO.200
XXXX
3. Press 5HGLDO.
You hear confirmation tone.
4. Hang up.
The password is assigned.
;
(X = Tenant 1~Tenant
4 CO line groups),
with the handset onhook.
10
NO.200
DATA PROGRAMMED
NO.200
JAN 15 WED 02:00
Strata DK System Administrator Guide 5/00
Setting System Parameters
Night Transfer
Night Transfer Lock Mode
After setting the 1LJKW7UDQVIHU button into the desired ring mode (Day/Day2/
Night), you can lock Night Transfer using the accompanying steps below.
➤ To set the system in Night Lock Mode
1. Press 1LJKW
7UDQVIHU to set the
system into the Day
or Day2 or Night
Mode, with the
handset on-hook.
2. Press 17/RFN.
The NT Lock LED flashes.
The LCD prompts you to
enter your password.
3. Enter your password
and press 17/RFN
again.
Y
= Password digits
If the correct password is
entered, the NT Lock LED
remains steady red and the
LCD displays the message
“NT LOCK.”
NO.200
ENTER PASSWORD
NO.200
YYYY
NT LOCK
JAN 15 WED 02:00
If an incorrect password is
entered, the NT Lock LED
turns OFF.
Strata DK System Administrator Guide 5/00
11
Setting System Parameters
Setting Date/Time/Day
Setting Date/Time/Day
This operation is possible from the Administrator station or attendant consoles and
enables you to set the date, time, and day.
➤ To set the date
1. Press a [DN] +, You hear a confirmation tone.
with the handset onhook.
2. Enter the date
(YYMMDD).
#651 ENTER DATE
1 ENTER DATE 970524
3. Press 5HGLDO.
You hear a confirmation tone.
4. Press 6SNU.
The telephone returns to the idle mode.
NO. NNN
MAY 24 MON 12: 05
➤ To set the time
12
1. Press [DN] + ,
with the handset onhook.
You hear a confirmation tone.
2. Enter the time
(HHMMSS) in the
24-hour clock format.
H=hour, M=minute and
S=seconds. Use leading zeros:
060530 = 6:05AM and 30
seconds; 143045 = 2:30PM
and 45 seconds.
#652 ENTER TIME
51 ENTER TIME 120500
Strata DK System Administrator Guide 5/00
Setting System Parameters
Setting Date/Time/Day
3. Press 5HGLDO.
You hear a confirmation tone.
4. Press 6SNU.
The telephone returns to the idle mode.
NO. NNN
MAY 24 MON 12: 05
➤ To set the day of the week
1. Press a [DN] + ,
with the handset onhook.
You hear a confirmation tone.
2. Enter the number
which corresponds to
the appropriate day of
the week:
#653 ENTER DAY
#653 ENTER DAY 2
= Sunday
= Monday
= Tuesday
= Wednesday
= Thursday
= Friday
= Saturday
3. Press 5HGLDO.
You hear a confirmation tone.
4. Press 6SNU.
The telephone returns to the idle mode.
Strata DK System Administrator Guide 5/00
NO. NNN
MAY 24 MON 12: 05
13
Setting System Parameters
Soft Keys
Soft Keys
➤ To turn Soft Keys on
➤ Press 0RGH+.
➤ To turn Soft Keys off
➤ Press 0RGH+.
Important!
The LCD examples in this guide are shown with Soft Keys turned OFF.
If your telephone has Soft Keys turned ON, the displays may be
different, but you can still follow the steps in this guide. Generally, the
information shown on line 2 displays on line 1 when Soft Keys are ON.
Station Relocation
This feature enables you to relocate an electronic, digital, or standard telephone
without requiring reprogramming of the station’s features. When relocated, the
telephone retains its station number and all programmed features, including personal
messages, feature buttons, Toll Restriction Class, and Speed Dial numbers.
One station at a time can be easily relocated. If two stations are unplugged at the same
time, the telephone that was unplugged last is relocated when plugged back in. Station
Relocation only works with the same type of station. For example, moving electronic
telephone to electronic telephone, digital to digital, and standard to standard. The label
on the bottom of your telephone indicates “Electronic” or “Digital” key telephone.
If a 10-button telephone is replaced with a 20-button type, the left column of buttons
retains the 10-button assignments. With LCD telephones, you use the LCD after
relocation, to confirm the desired location of the calling or called [PDNs].
CAUTION!
14
Always turn this feature off promptly after relocation is finished to
avoid accidental relocation.
Strata DK System Administrator Guide 5/00
Setting System Parameters
Station Relocation
Automatic Relocation
This function enables you to physically move a telephone from one location to another
while maintaining all of the telephone’s programmed features. Use the “Telephone
Location Record” on Page 45 for telephone location tracking.
➤ To turn on the Auto Station Relocation feature
1. From the
Administrator station,
press a [DN] +
to turn on the
Auto Station
Relocation feature.
You hear a confirmation tone indicating the Station
Relocation feature is on. If you hear a busy tone, the
Station Relocation feature is already turned on, or you
did not dial from the Administrator station.
2. Press 6SNU.
➤ To physically relocate (swap) Station A and B
Important!
Make sure that the location that the phone is moving to is already
vacant.
If you are moving a telephone (for example, Station A) to a new location
that already has a telephone connected to it (for example, Station B),
disconnect Station B from its telephone jack before you disconnect
Station A.
You cannot configure the moving station (Station A) to an already
occupied station (Station B).
1. Verify that the
telephone jack for the
new location does not
have a telephone
connected.
2. Unplug the telephone
that is moving from
its wall jack at the old
location.
Strata DK System Administrator Guide 5/00
15
Setting System Parameters
Station Relocation
3. Plug the telephone
that is moving into the
wall jack at its new
location.
The station is now moved to its new location while
retaining its original [DNs] and features.
4. From the
Administrator station,
press [DN] + to turn off Auto
Station Relocation,
then press 6SNU.
You hear confirmation tone. If you hear a busy tone,
the Station Relocation feature was already turned off,
or you did not dial from the Administrator station.
Relocation by Special Dial
This option enables two station numbers and their features to be exchanged with or
without physically relocating the telephones. The exchange takes place through the
use of special dial codes. For the procedure below, we are using Station A/B and
Location 1/2 to demonstrate the exchange.
➤ To turn on the Special Dial Station Relocation feature
1. From the
Administrator station,
press a [DN] +
to turn on the
Special Dial Station
Relocation feature
2. Press 6SNU.
16
You hear confirmation tone indicating that the Station
Relocation feature is on. If you hear a busy tone, the
Station Relocation feature was already turned on, or
you did not dial from the Administrator station.
Strata DK System Administrator Guide 5/00
Setting System Parameters
Station Relocation
➤ To relocate (swap) Station A and B
1. From Station A, press
a [DN] + 111
(111 = [DN] of
Station B).
You hear confirmation tone. Station A now has the
buttons and features of Station B and vice versa.
2. From Administrator
station, press a [DN]
+ to turn off
Special Dial Station
Relocation, then press
6SNU.
After Station Relocation is turned off, you hear a
confirmation tone. If you hear a busy tone, Station
Relocation was already turned off, or you did not dial
from the Administrator station.
Note After the relocation is completed, exchange the
keystrips of the two telephones, if they are
different, because a 10-button telephone
replaced with a 20-button type telephone,
retains the 10-button assignments.
Strata DK System Administrator Guide 5/00
17
Setting System Parameters
System Messages, Names and Memos
System Messages, Names and Memos
You can write or edit station LCD messages, names or numbers.
➤ To write LCD messages, names, or numbers
1. Access message/
memo/name displays.
2. Enter up to 32
alphanumeric
characters, (see Table
3 and the figure at the
right) using the
station keypad.
When you select a message number, a cursor
(–) appears at the first character in the message.
2358
Move Right
(Alpha mode only)
Move Left
Scrolls alpha/
special characters
3. Blank out any portion
of a message by
pressing and
moving the cursor to
the right, when in the
alpha character mode.
18
Toggles between
alphanumeric
characters
Each character the cursor transverses is deleted.
Strata DK System Administrator Guide 5/00
Setting System Parameters
System Messages, Names and Memos
Table 3
Dial Pad Key Equivalents
Letter
Key
Equivalent
Letter
Key
Equivalent
Letter
Key
Equivalent
Symbol
Key
Equivalent
A
J
S
:
B
K
T
–
C
L
U
+
D
M
V
/
E
N
W
F
O
X
G
P
Y
H
Q
Z
I
R
Note Use the dial pad
in alphanumeric
mode to create
the symbols
above.
User LCD Name/Number Display
Once you store names and numbers in the system memory for each station or device,
they can display on the station’s LCD while idle and at other stations’ LCDs when
they are called. The name also appears on the LCD during direct internal, forwarded,
and hunted calls. The LCD name does not display on Override or Off-hook Call
Announce (OCA) calls.
Name display information for non-LCD telephones or voice mail/auto attendant
devices can be stored from the Administrator's digital station. When Name/Number is
recorded for non-LCD telephones or other devices, their Name/Number is displayed
on LCD telephones when called. The name of a called telephone displays on the
calling telephone's LCD when the calling telephone has the Soft Key feature ON.
Note
Before entering names for other users, turn the Soft Key feature OFF by
pressing 0RGH+ when your telephone is idle. After the names have been
entered, turn the feature back on by pressing 0RGH+ when your
telephone is idle.
Strata DK System Administrator Guide 5/00
19
Setting System Parameters
System Messages, Names and Memos
➤ To enter name/number information for your telephone
1. Press [DN] + .
2. Enter up to 16
alphanumeric
characters, (see the
figure at the right)
using the station
keypad.
Current information displays
on the lower line of the LCD.
USER NAME?
2358
Move Right
(Alpha mode only)
Move Left
Scrolls alpha/
special characters
3. Press 6SNU.
The information is stored and
appears on the top line.
Toggles between
alphanumeric
characters
TOSHIBA EXT. 200
DATE DAY TIME
➤ To clear name/number display.
1. Press a [DN] +
.
2. Press 6SNU.
You hear confirmation tone,
then busy tone.
During the clear, the LCD
displays the message shown
on the right.
NO. NNN
USER NAME RESET
After the clear, a name is
NO. 200
displaced by a message and
DATE DAY TIME
call forward settings if they
are set.
Note This procedure does not erase the name/number.
To restore the display, press [DN] + .
20
Strata DK System Administrator Guide 5/00
Setting System Parameters
System Messages, Names and Memos
➤ To erase name/number display
1. Press a [DN] +
.
Current information displays
on the lower line of the LCD.
2. Press in the alpha
mode to enter blanks.
Blank characters replace the information. If all blanks
are entered, the telephone [PDN] displays on the LCD.
3. Press 6SNU.
The information is erased.
USER NAME?
➤ To enter name/number information for other stations/devices
1. Turn Soft Keys OFF
by pressing 0RGH+
.
The Administrator station
must be idle.
2. Press a [DN] + .
Current information for the
Administrator station appears
on the bottom line.
3. Press 3DJH.
USER NAME?
In this particular display,
(.7 stands for the [PDN] of
DESK EKT NO.?
a digital, electronic or
standard telephone.
4. Dial the [PDN] of the
station for which the
name/number
information is to be
recorded.
Current information for
station 111 appears on the
bottom line.
DESK EKT NO. NNN
5. Press 3DJH.
You are prompted for the user
name.
USER NAME?
Strata DK System Administrator Guide 5/00
21
Setting System Parameters
System Messages, Names and Memos
6. Enter up to 16
alphanumeric
characters, (see the
figure at the right)
using the station
keypad.
2358
Move Right
(Alpha mode only)
Move Left
Scrolls alpha/
special characters
Toggles between
alphanumeric
characters
We suggest that you enter the station number and the
user name.
7. Press 6SNU.
The new information displays on the top line of station
111’s LCD. The Administrator station LCD returns
to the normal idle display.
8. Repeat Steps 2~7 to
enter more names/
numbers.
9. Press 0RGH + when your telephone
is idle.
Your Soft Keys are turned ON.
➤ To erase other station name/number displays
➤ From the Administrator station, repeat Steps 1~6 of the previous procedure and
press , in the alpha mode in Step 6.
22
Strata DK System Administrator Guide 5/00
Setting System Parameters
System Speed Dial Numbers
System Speed Dial Numbers
System Speed Dial telephone numbers can be stored in the system memory by the
Administrator station only.
➤ To store a feature or System Speed number in a System Speed Dial Code
1. Press 5HGLDO, with
the headset on-hook.
2. Press 6' button
...or 6SHHG'LDO +
System Speed Dial
Code.
See Table 8 on Page 42.
3. Input the telephone
number to be stored
(up to 20 digits).
...or enter the feature
code sequence.
4. Press 5HGLDO.
See Table 4 on Page 26.
The information is stored in memory.
5. Repeat Steps 1~5 for
each telephone
number to be stored.
Clearing a Speed Dial Entry
➤ Repeat the preceding procedure, skipping Step 4.
Strata DK System Administrator Guide 5/00
23
Setting System Parameters
Speed Dial—Advanced Features
Accessing the Stored Number
➤ Press 6SHHG'LDO +
its associated Speed
Dial access code
...or press the 6'
button associated
with the code.
Note
Write down the Speed Dial codes and telephone numbers for future reference.
Speed Dial—Advanced Features
Feature Access Codes
You can program 6'(Speed Dial) buttons with feature access codes for a single
feature or a sequence of features as long as the keyed dial pad characters do not
exceed 20 digits. To determine how many digits you have, count 2 digits for &QI7UQ,
[PDN] and +ROG feature buttons and 1 digit for all other dial pad characters.
See Table 4 for a list of feature access codes.
➤ To store a feature onto a 6' button
➤ 5HGLDO+ 6' + Feature Access Code + 5HGLDO.
♦
See Table 4 on the following page for Feature Access code sequences.
♦
6' = the speed dial button the feature is stored on.
➤ To store a feature onto a speed dial code
➤ 5HGLDO+ 6SHHG'LDO + Speed Dial Access Code + Feature Access Code +
5HGLDO.
24
Strata DK System Administrator Guide 5/00
Setting System Parameters
Speed Dial—Advanced Features
Important!
●
●
●
●
Do not lift the handset.
If you do not enter the entire sequence within a specified time (set in system
programming for either one or three minutes), the operation times out and
your telephone returns to idle mode.
If your telephone does not have a Speed Dial, press “*” instead of Speed Dial
and enter 44 instead of # in all feature sequences.
[PDNs] can be stored in speed dial sequences but [PhDNs] and [SDNs]
cannot.
Strata DK System Administrator Guide 5/00
25
Setting System Parameters
Speed Dial—Advanced Features
Table 4
Feature Access Codes
Features
1
Feature Access Code Sequence
Account Code (Frequently used codes)
&QI7UQ + Account code digits
Automatic Callback
2
Background Music (Telephone Speakers ON)
[PDN]] + Background Music2 (Telephone Speakers OFF)
[PDN] + Call Forward—All Calls (To Station or VM)
[PDN] + + Directory Number
Call Forward—Busy (To Station or VM)
[PDN] + + Directory Number
Call Forward Cancel
[PDN] + Call Forward—No Answer
[PDN] + Call Forward External
[PDN] +
Call Forward External Cancel
[PDN] +
Door Phone Calling
[PDN] + door phone Directory Number
Hookflash Signal1
&QI7UQ + Off-hook Call Announce (Manual Mode)
Voice First ; Tone First , , or One-touch Voice Mail Access
[PDN] + Voice Mail Directory Number
Outgoing Calls
[PDN] + CO line access code
(See Table 5 on Page 40.)
Overrides (Busy, DND)
Overrides (Executive)
+ROG + [PDN] + [XXX]
4
Page Access
where:
[;;;] =Page access code
(See Tables 6 and 7 on Page 41.)
&QI7UQ + + [X X X] + [Y Y Y]
Park Call/Access Page
26
The existing call is parked and you are
automatically connected to the page.
where:
[X X X]3= 9 0 0~9 1 9 or 999 park zone number;
[Y Y Y] = page group/zone (See Tables 6 and 7 on
Page 41.
Pickup4 (Directed to station, new, or transferred
call)
+ROG + [PDN] + + station number [PDN]
Strata DK System Administrator Guide 5/00
Setting System Parameters
Speed Dial—Advanced Features
Table 4
Feature Access Codes (continued)
Features
Feature Access Code Sequence
Pickup a held or ringing [PDN] or [PhDN]
(not available on all systems)
[PDN] ++ [X X X X]
where:
[X X X X] = [PDN] or [PhDN] to be picked up
Pickup4 any ringing CO line (new call only)
+ROG + [PDN] + Pickup Station Page or Ringing Door Phone4
+ROG + [PDN] + Pickup4 External Page
+ROG + [PDN] +
5
[PDN] + + (~)
Pickup Line on Hold (lines 1~99)
6
Pickup Line on Hold (lines 100~200)
1.
2.
3.
4.
5.
6.
[PDN] + + (~)
These codes can be used during a CO line call.
Background music speakers can only be turned ON/OFF from the Administrator’s telephone.
XXX = Auto Park Orbit 9 9 9 (access the next available park orbit), or General Park Zones 900~919, or
[PDN] on which the call should be parked. Only use 999 with LCD telephones.
This feature will hold an existing call when the button is pressed. If the button is pressed when not on a
call, pickup or page will still be accessed. These codes can be used during a CO line call.
After pressing the feature button, the user dials the line number (01~99) to pickup the line.
After pressing the feature number, the user dials the line number (100~200) to pickup the line.
Strata DK System Administrator Guide 5/00
27
Setting System Parameters
Speed Dial—Advanced Features
Speed Dial Pause and Flash Storage
Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash
The )ODVK button stores a flash
signal only if 6SG'LDO3DXVH
is programmed as a flexible
button on the telephone. The
flash signal is 0.5 or 2 seconds
long (set in system
programming) and is displayed
on the LCD as “)”.
Press )ODVK
Regular Pause
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays “3”.
Long Pause
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays “/”.
Press 6SG'LDO3DXVH
Press 6SG'LDO/QJ3DXVH.
...or if 6SG'LDO3DXVH is not
on the telephone, press )ODVK
to store a pause.
...or enter the hookflash dial
code (&QI7UQ + ).
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. The Administrator station can
be used to link System Speed Dial Codes. This enables lengthy digit strings to be
stored under one Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the
number linked to it. Typically, a company’s special carrier access telephone numbers
are stored as part of the digit string.
➤ To link system/system speed dial numbers
1. Press 5HGLDO.
2. Press 6'
...or 6SHHG'LDO + a
System Speed Dial
Access Code.
See Table 8 on Page 42 for Station Speed Dial Access
Codes.
3. Press 6SHHG'LDO.
28
Strata DK System Administrator Guide 5/00
Setting System Parameters
Speed Dial—Advanced Features
4. Enter the System
Speed Dial Access
Code to which the
number will be
linked.
See Table 8 on Page 42 for System Speed Dial Access
Codes.
5. Enter the telephone
number to be stored
(max. 17 digits).
6. Press 5HGLDO.
Strata DK System Administrator Guide 5/00
The number is stored and is automatically dialed when
the optional linked station 6' button is pressed or the
linked Station Speed Dial access code is dialed.
29
Setting System Parameters
Speed Dial—Advanced Features
Linked Speed Dial Example
Note
Your system must be programmed for “Toll Restriction Override by System
Speed Dial” to allow this example.
➤ To store a CO line access code plus a long distance carrier access code (10288) and
link to *690
In the following example, you are going to link 690 to a telephone number and store
it in System Speed Dial location .
1. Press 5HGLDO +
6SHHG'LDO + + [PDN] + + 5HGLDO
The CO line access code and the long distance carrier
code (910288) in the System Speed Dial location
690 is stored.
Note “I” displays when the [PDN] is stored.
♦
[PDN] is used to automatically access internal dial
tone before dialing .
♦
= is the CO line access code and
is the long distance carrier access code.
♦
is the System Speed Dial Code.
♦
is the System Speed Dial Code that is being
linked to code .
2. Store the System
Speed Dial
information on Speed
Dial Codefrom
the Administrator
station.
3. Press 5HGLDO +
6SHHG'LDO +
+ 6SHHG'LDO +
+ 5HGLDO.
♦
is the telephone number with
area code.
30
Strata DK System Administrator Guide 5/00
Setting System Parameters
Speed Dial—Advanced Features
➤ To use the new link
➤ From any station, press 6SHHG'LDO+or press 6' () button if
available on the calling station. The telephone automatically dials to access a
CO line, then the carrier access code () plus the telephone number
().
Speed Dial Memo
This feature enables the Administrator station to program an 11- or 12-character name
for each of the system Speed Dial numbers. You can scroll through the memo pad of
names to select the appropriate party.
Notes
●
●
Before entering names for Speed Dial Numbers, turn off the Soft Key feature by
pressing 0RGH + when the telephone is idle. After entering the names, turn
the feature back on by pressing the0RGH + when the telephone is idle.
For your convenience, use the “Telephone Location Record” on Page 45 for
recording speed dial numbers with memos from the Administrator station.
➤ To program names and numbers
1. Press 5HGLDO, then
6SHHG'LDO.
The LCD displays:
2. Enter the Speed Dial
number.
The current name/memo and its code displays (see
Table 8 on Page 42).
3. Press 0RGH.
The name/memo appears as you enter it.
Strata DK System Administrator Guide 5/00
#* NNN SPEED DIAL
31
Setting System Parameters
Speed Dial—Advanced Features
4. Enter up to 12
alphanumeric
characters, (see the
figure at the right)
using the station
keypad.
2358
Move Right
(Alpha mode only)
Move Left
Scrolls alpha/
special characters
Toggles between
alphanumeric
characters
5. Press 0RGH.
6. Press [PDN], then
enter the desired CO
line access code, plus
the telephone number
(20 digits maximum).
The number appears as you entered it. Speed Dial
numbers and memos and their corresponding two- or
three-digit codes can be recorded on the Speed Dial
Memo Directory at the back of this guide.
Note If telephones use direct appearing CO line
buttons to place outgoing calls–do not press
[PDN] in Step 6.
7. Press 5HGLDO.
The data is recorded into memory.
8. Repeat Steps 1~7 to
enter more names/
memos.
32
Strata DK System Administrator Guide 5/00
Setting System Parameters
Speed Dial—Advanced Features
➤ To view and/or dial a Speed Dial number
1. Press 0RGH + XXX.
The Speed Dial number
appears with a name or
memo.
XXX
MODE NO.8XXX
= Personal or System Speed Dial Codes.
See Table 8 on Page 42.
Note It is recommended that you record Speed Dial
numbers and memos and their corresponding
three-digit codes on the Speed Dial Memo
Directory at the back of this guide.
2. Press 3DJH to scan
the directory for the
appropriate number/
memo.
3. Press any available
/LQH or [DN] + a CO
Line Access Code.
The number is dialed.
See “CO Line Access Codes” on Page 39.
➤ To check a Speed Dial number
1. Press 0RGH + .
See Table 8 on Page 42. The LCD displays a “+” sign
if there are more than 16 digits.
2. Enter a speed dial
code.
Note If the number is longer than 16 digits, press
6FUROO to display the remaining digits.
3. To see the next
number, press 3DJH.
Strata DK System Administrator Guide 5/00
33
Setting System Parameters
Toll Restriction Override/Traveling Class Codes
Toll Restriction Override/Traveling Class Codes
As a System Administrator, you can add or change Toll Restriction Override codes.
When a station dials these override codes, after accessing an outside line or LCR, the
station Toll Restriction Class is changed to that assigned to the override code dialed
(Traveling Class). To add, change or delete Toll Restriction Override or a Traveling
Class code, the following steps must be performed from the Administrator’s
telephone.
➤ To add/delete/change toll restriction override or traveling class codes
1. Press [DN].
You hear a confirmation tone.
2. Enter the Traveling
Class access code
The code appears on the LCD
as you enter it and you hear a
dial tone.
a
NO.NNN
ENTER OVR. CODE
...or enter
~ to
change the assigned
TR Class 01~08
Travel Class Codes
respectively.
...or enter the Toll
Restriction Override
access code
~ represent override Codes 1 and 2
respectively.
a
3. Enter the desired
four-digit override
code.
34
Strata DK System Administrator Guide 5/00
Setting System Parameters
Toll Restriction Override/Traveling Class Codes
4. Press 5HGLDO.
You hear a confirmation tone.
The code is stored in memory.
NO. NNN
DATA PROGRAMMED
Notes
●
●
●
When making outgoing calls, dialing the Traveling
Class code puts the telephone in the Toll
Restriction class of the code that was dialed.
When making outgoing calls, dialing the Override
code, overrides all toll restrictions that may be
normally applied to the telephone.
The Toll Restriction Travel Class/Override codes
do not print on SMDR reports.
5. Repeat Steps 1~3 to
enter up to eight
Traveling Class codes
and two Toll
Restriction Override
codes.
6. Press 6SNU.
The telephone returns to the idle mode.
➤ To delete toll restriction override or traveling class codeVerified Account Codes
1. Press a [DN] and dial
the assigned toll
restriction override
change access code:
~ or
~.
You hear a confirmation tone.
2. Press 5HGLDO.
You hear confirmation tone.
3. Press 6SNU.
The telephone returns to the idle mode.
Strata DK System Administrator Guide 5/00
35
Setting System Parameters
Verified Account Codes
Verified Account Codes
Adding, deleting, or changing Verified Account Codes can be done at designated
stations only. The privileged stations are assigned by the system programmer.
➤ To add or change verified account codes
1. Press [DN] + .
You hear a confirmation tone.
2. Enter the desired
three-digit verified
account code
reference number
(~) or
(~) for some
systems.
Account codes appear on the
LCD as you enter them. All
systems have 300 account
code numbers (~),
except the RCTUE/F
processor, which has 500
(~).
3. Enter the verified
account code. The
system is
programmed for
___digits.
Account codes can be 4~15
digits long; the number of
digits is set system wide for
all account codes in system
programming. The code
appears on the LCD as you
enter it.
4. Press 5HGLDO.
You hear a confirmation tone.
The code is stored.
NO.NNN
VERIFY ACC SET
NO.NNN
ERIFY ACC SET XXX
NO.NNN
XXX XXXXXXXXXXXXX
NO.NNN
DATA PROGRAMMED
5. Press 6SNU.
6. Repeat Steps 1~4 to
enter more verified
account codes.
36
The telephone returns to the idle mode.
Strata DK System Administrator Guide 5/00
Setting System Parameters
Verified Account Codes
➤ To delete verified account codes
1. Press [DN] + .
You hear a confirmation tone.
2. Enter the three-digit
verified account code
reference number
(~) or
(~) to be
deleted.
You hear a confirmation tone.
3. Press 5HGLDO.
The telephone returns to the idle mode.
4. Press 6SNU.
Strata DK System Administrator Guide 5/00
37
Setting System Parameters
Verified Account Codes
38
Strata DK System Administrator Guide 5/00
Access Codes
A
This appendix contains access codes for outside Speed Dial numbers, CO lines,
Paging Group and Paging Zone Codes.
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a
&2 or /LQH button, you can enter the appropriate code listed in Table 5 to access an
outside line.
You can also store the code on a Speed Dial (6') button for one-touch access. If you
are storing a CO line access code onto a Speed Dial code, enter before the CO
access code (e.g., to store code , enter ).
In some systems, is used as a general group code or to access Least Cost Routing
(LCR). System users are required to dial in order to access an outside line. If you
press in a system programmed with LCR, you may not hear internal dial tone,
depending on system programming.
See your System Administrator for the code which applies to your telephone.
Strata DK System Administrator Guide 5/00
39
Access Codes
Feature Access Codes
➤ To access a line
➤ Press [PDN] + CO Line Access Code (Table 5).
Table 5
CO Line Access Codes
System
CO Line Access Codes
DK14
or ~ or ~
DK16e, DK16
or ~ or ~
DK40i, DK40
or ~ or ~
DK424 (RCTUA)
or ~ or ~
DK424 (RCTUBA/BB) and
DK424i (B1CU)
or ~ or ~
DK424 (RCTUC/D) and
DK424i (B2CAU/B2CBU)
(B3CAU/B3CBU)
or ~ or ~
DK424 (RCTUE/F) and
DK424i (B5CAU/B5CBU)
or ~ or ~
Notes
●
9 accesses LCR or general line group.
●
a accesses line groups 1~16, respectively.
●
a accesses individual lines 1~200, respectively.
Feature Access Codes
See Table 4 on Page 26.
40
Strata DK System Administrator Guide 5/00
Access Codes
Paging Group Codes
Paging Group Codes
Your telephone can be assigned to page group(s). Telephones can be a member of
more than one group and each group can have as many as 120 stations. Station users
can access each group separately by dialing an access code (see Table 6 and Table 7 on
Page 41 ).
➤ To enter a paging group access code
➤ Press [PDN] + Access Code
Table 6
Paging Groups
Paging Group
Access Code
Paging Group
Access Code
Station Group A
Station Group E
Station Group B
Station Group F
Station Group C
Station Group G
Station Group D
Station Group H
Table 7
External Paging Zones
External Paging Zone
Access Code
External Paging Zone
Access Code
Paging All Call,
External Page Zone
DK14, DK40i, DK40, DK424 (all processors)
Paging
All Call Page Zone
DK40i, DK40, DK424 (RCTUA, RCTUBA/BB, RCTUC/D), and
DK424i (B1CU, B2CAU/B2CBU, B3CAU/B3CBU)
Zone A
Zone C
Zone B
Zone D
DK424 (RCTUE/F) and DK424i (B5CAU/B5CBU)
Zone A
Zone E
Zone B
Zone F
Zone C
Zone G
Zone D
Zone H
Strata DK System Administrator Guide 5/00
41
Access Codes
Speed Dial Access Codes
Speed Dial Access Codes
The number of station and system speed dial numbers available to you depends on the
size of your company’s telephone system. Check with your System Administrator to
find out which codes apply to your system.
Once you store a telephone number on any of the codes listed below, you can dial the
number by entering the code, such as or 6SHHG'LDO + .
Table 8
Telephone System Size
Station
Speed Dial Codes
System
Speed Dial Codes
Small System
(DK14, DK16, DK16e, DK40, DK40i, and RCTUA)
a
a
Medium System
(RCTUBA/BB and RCTUC/D, B1CU,
B2CAU/B2CBU and B3CAU/B3CBU)
a
a
Large System
(RCTUE/F and B5CAU/B5CBU)
a
a
Table 9
42
Speed Dial Access Codes
System Speed Dial Number Linking
System
SystemSpeed Dial Codes that can be inked to
other Speed Dial Codes
DK14, DK16e, DK40i, RCTUA
a
RCTUBA/BB, RCTUC/D, B1CU,
B2CAU/B2CBU and B3CAU/B3CBU
a
RCTUE/F and B5CAU/B5CBU
a
Strata DK System Administrator Guide 5/00
Directories/Record
B
User Name/Number Directory
Name/Numbers are limited to 16 alphanumeric characters and are displayed on the top
row or idle LCD stations and the bottom row of called LCD stations.
This directory is provided for the Administrator station for referencing and recording
of other station Name/Numbers.
Station #:__________
D A T E
D A Y
T I M E
D A Y
T I M E
D A Y
T I M E
Station #:__________
D A T E
Station #:__________
D A T E
Strata DK System Administrator Guide 5/00
43
Directories/Record
Speed Dial Memo Directory
Station #:__________
D A T E
D A Y
T I M E
Speed Dial Memo Directory
Speed Dial memos are limited to 12 characters for the memo (top row of LCD) and 16
digits/pauses for the dial number (bottom row of LCD).
This directory is provided for recording Speed Dial numbers with memos from the
Administrator station.
Code:
11-Character Memo Example
* 6 0 0 - M E M O
H E R E
S P E E D
D I A L #
H E R E
*
-
*
-
*
-
*
-
Note
44
Speed Dial numbers may be 60~99 or 600~699 depending on the system size.
Strata DK System Administrator Guide 5/00
Directories/Record
Telephone Location Record
Telephone Location Record
➤ To view [PDNs], port numbers (physical and logical), and [DNs] of LCD telephones
1. Press a [DN] +
.
The [PDN] is displayed as INT = NNN
(NNN = directory number of button).
2. Press a [DN] +
.
The “Physical” port number and the “Logical” port
number of an LCD telephone is displayed.
3. Press any [DN] +
to display the
button directory
number.
The button [DN] is displayed as DN = NNN
(NNN = directory number of button).
Note
It is recommended that each location, [PDN], and user name are recorded in
the table provided below.
Room/Office Location
Primary Directory Number
Strata DK System Administrator Guide 5/00
User’s Name
45
Directories/Record
Telephone Location Record
Room/Office Location
46
Primary Directory Number
User’s Name
Strata DK System Administrator Guide 5/00
Index
A
C
about this book
conventions, v
important notes, vi
organization, iv
related documents, vii
access codes
CO line, 39
feature, 24
speed dial, 42
access DISA, 4
account codes
revision, 34
verified, 35, 36
auto attendant, 1, 4
announcement recording
recommendations, 4
CO line assignments, 2
dialing plan, 3
menu, 3
system dialing plan, 3
automatic station relocation
physically, 15
swap buttons/features, 15
CAMA trunk calls, 6
CO lines, 4
access codes, 39
auto attendant assignments, 2
codes
feature access, 24
paging group, 41
speed dial access, 42
toll restriction override, 34
traveling class, 34
verified account, 35, 36
Strata DK System Administrator Guide 5/00
D
day 2 mode, 9
day mode, 9
day/day 2/night modes, 2, 5, 9
default DNs, 3
dial pad key equivalents, 19
directories, 43
speed dial memo, 44
user name/number, 43
DISA
access, 4
outgoing calls, 3
47
Index
E~S
security code, 1, 4, 5
cancel, 6
enter/change, 5, 7
E
P
emergency 911 calls, 6
equipment notes, iv
external paging zones, 41
page button, 21, 33
paging group codes, 41
primary announcement, 2, 4
F
R
feature access codes, 24
flash button, 28
records, 43
telephone location, 45
relocation by special dial, 16
L
LCD name/number information
clear, 20
enter, 20
erase, 21
other stations/devices
enter name/number, 21
erase name/number, 22
linked speed dial example, 30
M
memos, 18
messages, 18
multiple announcement machine, 4
N
names, 18
night mode, 9
night transfer, 1, 2, 9
enable/disable, 9
lock mode, 11
lock/unlock password, 9
48
assign/change, 10
routing (ringing) patterns, 9
non-LCD telephones, 19
S
secondary announcement, 2, 4
setting date/time/day, 1, 12, 13
soft keys, 1, 14, 21, 31
to turn off, 14
to turn on, 14
speed dial, 23, 31
access codes, 42
accessing stored number, 24
advanced features, 24
checking a number, 33
clearing an entry, 23
dialing, 33
flash, 28
long pause, 28
memo, 31
program names and numbers, 31
number linking, 28
example, 30
store CO line access code, 30
use new link, 31
Strata DK System Administrator Guide 5/00
Index
T~W
pause and flash storage, 28
storing a feature, 23
storing system speed dial number in a
system speed dial code, 23
system numbers, 23
view, 33
station (directory) number, 3
station relocation, 1, 14
automatically relocate, 15
relocation by special dial, 16
system
auto attendant dialing plan, 3
messages, names and memos, 1, 18
setting parameters, 1
speed dial memo numbers, 1
speed dial numbers, 23
T
telephone location record, 31
tenant service, 9
toll restriction override, 1, 34
add/delete/change, 34
by system speed dial, 30
delete, 35
traveling class codes, 1, 34
add/delete/change, 34
delete, 35
Strata DK System Administrator Guide 5/00
U
user LCD name/number display, 19
clear, 20
erase, 21
other stations/devices
enter name/number display, 21
erase name/number display, 22
write, 18
V
verified account codes, 1, 35, 36
add/change, 36
delete, 37
W
write
LCD memos, 18
LCD messages, 18
LCD name/number displays, 18
49
Index
W~W
50
Strata DK System Administrator Guide 5/00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising