Renesas | Compact Emulator M30620T-CPE | Specifications | Renesas Compact Emulator M30620T-CPE Specifications

Safety • Service • Satisfaction
-Renesas Microcomputer-
Renesas Microcomputers General Presentation
Development Environment
Emulators
Microcomputer Tool Marketing Dept.
10/30/2007 Rev.10.00
1
©2007. Renesas Technology Corp., All rights reserved.
Emulator line-up
2
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
Introduction of development tool Application Notes
Emulator
E8
Document Title
Renesas E8 Emulator Application Notes Introductory Guide for H8/300H Tiny
E10A-USB
E6000H
Renesas E10A-USB Emulator Application Notes Introductory Guide for SH/Tiny (SH7125)
H8SX Family Emulator E6000H Performance Measurement
H8SX Family Emulator E6000H Usage of Real-time RAM Monitoring
E6000
H8/300H CPE
H8S Family Emulator E6000 Application Notes How to Use the Sequential
H8/300H Tiny Series Compact Emulator Operating Back Trace ([Trace] Window)
H8/300H Tiny Series Compact Emulator Using the GUI I/O Functions
The list is displayed by clicking “Application Notes”
of a left menu in Software and Tools Web site.
Schedule for the future
- E200F (How to use performance measurement,
How to use profile measurement)
- PC7501 (How to Use the sequential break function,
How to use graphic display of data trace function)
- Renesas E8 Emulator Application Notes
Introductory Guide for R8C Tiny.
- E8a, E100
3
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
MEMO
4
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E10A-USB Emulator
5
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E10A-USB Supported Device Roadmap
06/S
Target
MCUs
NOW
07/K
SH7263
H8S/2117F
SH7203
H8SX/163xF
SH7722
H8SX/164xF
H8S/2125F
H8SX/1622F
SH7671
SH7764
07/S
H8SX/1668RF
H8S/H8SX Family next
H8SX/1658RF
SH-2A core next
H8SX/1568F
SH-4A core next
H8SX/1558F
H8S/2472
SH7721
SH7285
SH7265
SH7205
Improvement
SH7243
SH7730
E10A-USB Lite
HS0005KCU11H
New E10A-USB H/W for SH-Dual core
External flash memory download function
(H8S Internal Flash Rom MCU)
6
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
08/K
SH-Mobile Series next
Features of the E10A-USB (1)
• The OCD emulator excellent in cost performance.
E10A-USB can be used with all microcomputers which has H-UDI function*.
The body size is very small as 97 mm × 65 mm × 22 mm.
*: except SH7055, SH7058, SH7059
• Real time Emulation
The real time emulation in the highest operation frequency of CPU is available.
• Excellence Operationally
This emulator is possible to debug for user program with pointing device (mouse etc.)
by using High-performance Embedded Workshop that running
on Microsoft Windows XP or Microsoft Windows 2000.
Also, the emulator performs high-speed file download.
And the build environment and the debug environment can be integrated by installing
it with the compiler package.
7
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Features of the E10A-USB (2)
• Substantial Debug Function
Debug efficiency improvement by substantial break and trace function.
Set break point and break condition in exclusive window, display trace
information to window.
Also, provide abundant command line function.
• Debug for User System in product configuration
The debug target configuration is almost same as the user’s filial product system.
• Debug environment using USB interface
The E10A-USB can be used in both of laptop PC and desktop PC since PC
interface is USB. And the emulator is USB bus powered.
Note1: E10A-USB Emulator software for SH requires SuperH RISC engine C/C++ compiler package Ver.6 or later.
Microcomputer of SH-4A core and SH4AL-DSP core requires SuperH RISC engine C/C++ compiler
package Ver.8 or later.
Microcomputer of SH-2A core requires SuperH RISC engine C/C++ compiler package Ver.9 or later.
Note2 : E10A-USB Emulator software for H8S requires H8S, H8/300 C/C++ compiler package Ver.4 or later.
H8SX family requires H8SX, H8S, H8/300 C/C++ compiler package Ver.6 or later.
8
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
System configuration of the E10A-USB Emulator
(1)
High-performance
Embedded Workshop
Connector for E10A-USB
Note1: Note that the pin assignments of the H-UDI port connector is different from those of the
connector manufacturer
9
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
System configuration of the E10A-USB Emulator
(2)
Notes on Installation for Prospective Purchasers
You do not need to purchase a Device Group Addition (License Tool for Device Group Additions)
to support the first device group, the E10A-USB is shipped with an installer that allows the user to
support any one of these.
Our range of Device Group Additions are for adding subsequent device groups to an existing system.
Refer to the Product Configuration on the E10A-USB home page for further details.
Further information is available from your Renesas distributor or sales representative.
10
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
System configuration of the E10A-USB Emulator
(3)
How to install additional device groups
If the user subsequently wishes to upgrade their E10A-USB to support an additional device group,
Device Group Additions (License Tool for Device Group Additions) are available as additional
purchases (subject to release schedule). The Device Addition is supplied as a CD-ROM with the
desired Group software. This is used in conjunction with the original E10A-USB unit.
Note: It is possible for one E10A-USB unit to support ALL of these devices groups if all of the Device
Group Additions are purchased and installed.
11
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Table1 E10A-USB Product lineup
Part No.
E10A-USB
User I/F cable
Remarks
HS0005KCU01H
Type A
(without AUD function)
14 pins
High-performance Embedded Workshop included
(with license for one device group)
HS0005KCU02H
Type B
(with AUD function)
14 pins + 36 pins
High-performance Embedded Workshop included
(with license for one device group)
HS0005KCU04H
Type C
(with AUD function)
14 pins + 38 pins
For SH7265 and SH7205
Table2 E10A-USB “License tool for device group
addition” product lineup
12
Part No.
Device group
HS2339KCU01SR
H8S
HS1527KCU01SR
H8SX
HS7047KCU01SR
SH-2
HS7206KCU01SR
SH-2A
HS7729KCU01SR
SH-3
HS7290KCU01SR
SH-Mobile
HS7318KCU01SR
New SH-Mobile
HS7751KCU01SR
SH-4
HS7780KCU01SR
SH-4A
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Table3 E10A-USB support device list for
H8S Family and H8SX Family
Device group
Supported device
Shipment schedule
H8S device group
H8S/2212F, H8S/2212UF, H8S/2218F, H8S/2218UF, H8S/2377F, H8S/2377RF,H8S/2378F,
H8S/2378RF, H8S/2374RF*, H8S/2372RF*, H8S/2371RF*, H8S/2370RF*, H8S/2374F*, H8S/2372F*,
H8S/2371F*, H8S/2370F*, H8S/2364F*, H8S/2362F*, H8S/2361F*, H8S/2360F*, H8S/2367F,
H8S/2368F, H8S/2168F, H8S/2167F, H8S/2166F, H8S/2437F, H8S/2114F, H8S/2339EF,
H8S/2329EF, H8S/2319EF, H8S/2170F, H8S/2171F, H8S/2172F, H8S/2158F, H8S/2189RF,
H8S/2116F, H8S/2437F, H8S/2215RF, H8S/2125F, H8S/2215TF*, H8S/2215URF*, H8S/2215TUF*,
H8S/2117F, R8J32500, R8J32700, H8S_custom_SoC(2000),H8S_custom_SoC(2600)
In mass production
H8S/2472
T.B.D.
H8SX/1527F, H8SX/1525F, H8SX/1582F, H8SX/1653F, H8SX/1654F, H8SX/1663F,
H8SX/1664F, H8SX/1651, H8SX/1527RF, H8SX/1544F, H8SX/1543, H8SX/1622F
H8SX/1632F, H8SX/1634F, H8SX/1638F, H8SX/1642F, H8SX/1644F, H8SX/1648F
In mass production
H8SX/1668RF, H8SX/1658RF, H8SX/1568F, H8SX/1558F
Nov-07
H8SX device group
*: When using E10A-USB emulator with these devices, please select the following device name instead.
13
Using device
Selecting device name
H8S/2374RF, H8S/2372RF, H8S/2371RF, H8S/2370RF
H8S/2378RF
H8S/2374F, H8S/2372F, H8S/2371F, H8S/2370F
H8S/2378F
H8S/2364F, H8S/2362F, H8S/2361F, H8S/2360F
H8S/2368F
H8S/2215TF, H8S/2215URF, H8S/2215TUF
H8S/2215RF
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Table4 E10A-USB support device list for
SH family
Device group
Supported device
Shipment schedule
SH-2 device group
SH7615, SH7616, SH7047F, SH7144F, SH7145F, SH/Tiny Debug MCU Board
R5F70834A, R5F70835A, R5F70844A, R5F70845A, R5F70854A, R5F70855A, R5F70865A,
R5E70835R, R5E70845R, R5E70855R, R5E70865R, R5E71464R, R5E71494R (R5E71491R),
SH7618, SH7618A, SH7619, SH7606, SH7125, SH7124,
R5F71464R, R5F71494R (R5F71491R), R5F71464A, R5F71494A
In mass production
SH-2A device group
SH7206, SH7211F, SH7261, SH7201, SH7263, SH7203, SH7670, SH7671, SH7672, SH7673
In mass production
SH7285, SH7243
Nov-07
SH7705, SH7710, SH7712, SH7713*, SH7720 Series, SH7630, SH7641, SH7660, SH7660A,
SH7729, SH7709A, SH7729R, SH7709S, SH7727, SH7706, SH-3(core)_custom_SoC
In mass production
SH7721
Nov-07
SH-Mobile
device group
SH-Mobile1, SH-MobileJ, SH-MobileV, SH-MobileJ2
SH-MobileV2, SH-MobileL, SH-MobileL2, SH-MobileJ3
In mass production
New SH-Mobile
device group
SH-Mobile3, SH-Mobile3A, SH-MobileR (SH7722)
In mass production
SH-4 device group
SH7750S, SH7750R, SH7751, SH7751R, SH7760
SH7750Rbase_SOC
In mass production
SH-4A device group
SH7763, SH7770, SH7780, SH7781, SH7785, SH7774, SH7764
In mass production
SH7730
Nov-07
SH-3 device group
* : When using E10A-USB emulator with SH7713, please select SH7712 device name instead.
14
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
“E10A-USB” for Multi-core devices
• New “E10A-USB” variation for SH7205 and SH7265
- Multi Core + Single Debugging Module in the device.
Single debugging module can control two CPUs.
- Single 38-pin H-UDI connector can be used for dual core.
CPU
#0
CPU
#1
H-UDI and AUD
H-UDI connector
SH7205/65
User Target System
HS0005KCU04H
15
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
E10A-USB for SH7205/7265 features
CPU#0
CPU#1
On Chip Break
10
Performance Analysis
4
AUD Trace
32 Kcycles
Branch instructions/Memory Access/Software
Condition can be set each CPU
Build-In Trace
512 Cycles
4
512 Cycles
1024 Cycles
16
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
Build Example for AMP
CPUID#1 Workspace
CPUID#2 Workspace
Build
Build
ELF/DWARF
ELF/DWARF
S-Type
S-Type
New tool!
unifile.exe
Transfer binary to FLASH
S-Type
17
Download only
debug information
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Target board
SH/Tiny Debug MCU Board
"SH/Tiny debug MCU board" is an optional board for SH/Tiny Series (SH7124
and SH7125) to use the E10A-USB on-chip debugging emulator as an in-circuit emulator.
This optional board allows debug functions of which the in-circuit emulator originally
has, such as performance measurement and trace, to be used with E10A-USB emulator,
and all dual purpose terminals (for H-UDI and user functions) of the SH/Tiny Series
(SH7124 and SH7125) to be used for user functions exclusively.
Mass-produced chips of the SH/Tiny Series (SH7124 and SH7125) do not incorporate an AUD
function, performance function, or trace memory.
Multiplexing of the H-UDI pins with pins for user functions makes it impossible to use the
E10A-USB for debugging of user functions.
18
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
System composition for use of
SH/Tiny debug MCU board
IC socket interface
SH/Tiny
19
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Product type name of SH/Tiny debug MCU board
Series
Group
E10A-USB (HS0005KCU02H)
+
SH/Tiny Debug MCU board
SH/Tiny Debug MCU board
SH7124
HS7124EDB01H-E1
(PLQP0048JA-A (FP-48F))
HS7124EDB01H
(PLQP0048JA-A (FP-48F))
HS7125EDB01H-E1
(PLQP0064KB-A (FP-64K))
HS7125EDB01H
(PLQP0064KB-A (FP-64K))
HS7125EDB02H-E1
(PRQP0064GB-A (FP-64A))
HS7125EDB02H
(PRQP0064GB-A (FP-64A))
SH/Tiny
SH7125
20
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Specifications of SH/Tiny debug MCU board
21
Supported MCU
SuperH RISC engine Family SH/Tiny (SH7125) Series
SH7124, SH7125 Group
Power supply to
SH/Tiny Debug MCU board
The following two ways of powering are available.
(1) To supply via the Vcc terminal on the target board. (Max. 300 mA)
(2) To supply externally via the power terminal on the
SH/Tiny Debug MCU board. (5 V)
Connection to target system
Plug into the IC socket on the target board.
Connection to
E10A-USB emulator
H-UDI (with AUD) : 14 pins
H-UDI (without AUD) : 36 pins
External dimension
Body: 80 mm × 85 mm
Cable: 150 mm (flexible cable)
Cable head: 40 mm × 35 mm
Bundled Accessory
Applicable IC Socket for MCU package (qty.1)
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
Features in using with SH/Tiny Debug MCU board
SH/Tiny Debug MCU board
AUD trace (256 Kcycles)
AUD break (8)
Real-time profile
C0 coverage
AUD trace(16 Kbranches)
Bus trace (1 Kcycles)
E10A-USB
+
Performance measurement
All user pins: available
SH/Tiny
Debug MCU
board
Downloading a program
GO/BREAK
STEP
PC Break condition
On-chip event point
Reading of memory
/Writing of memory
Watching variables
Branch trace (8 branches)
22
E200F
Real-time profile
E10A-USB
©2007. Renesas Technology Corp., All rights reserved.
[List] Sheet
(number of accesses, number of cycles)
Relation of function calls
Renesas Microcomputers General Presentation
Development Environment - Emulator
SH/Tiny Debug MCU board information
on the WEB
http://www.renesas.com/e10a_usb ← Top page of E10A-USB
23
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
HS0005ECK01H
[Overview]
User interface cable for Mictor 38-pin connector is a optional cable to connect the E10A-USB emulator
(HS0005KCU02H) to the Mictor 38-pin connector (2-5767004-2: Tyco electronics AMP K.K.) mounted
on the user system.
[System Configuration]
[Product type name]
HS0005ECK01H
[Following boards need HS0005ECK01H]
- SH7785 Solution Engine
- SH7722 Solution Engine
*: Mictor 38 pin-connector is also used when connecting
the E200F emulator for SH7785 (R0E0200F2EMU00) to the user system.
24
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Pin Assignments of S0005ECK01H
Pin NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Signal*4
N.C.
N.C.
MPMD(GND)
N.C.
UCON#(GND)*3
AUDCK
N.C.
ASEBRK#/
BRKACK*2
RESET#*2
N.C.
TDO
UVCC_AUD
N.C.
UVCC
TCK
N.C.
TMS
N.C.
TDI
Input/
Output*1
Output
Input/
Output
Output
Output
Output
Output
Input
Input
Input
Note
Pin NO.
20
21
22
23
24
25
26
27
User reset
28
29
30
31
32
33
34
35
36
37
38
Signal*4
N.C.
TRST# *2
N.C.
N.C.
AUDATA3
N.C.
AUDATA2
N.C.
AUDATA1
N.C.
AUDATA0
N.C.
AUDSYNC#*2
N.C.
AUDRST#*2
N.C.
AUDMD
N.C.
N.C.
Input/
Output *1
Input
Output
Output
Output
Output
Output
-
*1: Input to or output from the user system.
*2: The symbol "#" means that the signal is active-low.
*3: The emulator monitors the GND signal of the user system to detect whether or not the user system
is connected.
*4: Signal names are not intended to correspond to those for the actual MCU. Refer to recommended circuits
and notes described in the Supplementary Information on Using the SHxxxx and connect only the required
signals. Other than UVCC_AUD, the signals are the same as those for the 36-pin interface. Supply the
operating voltage of the AUD to UVCC_AUD.
Notes:
• The GND bus leads, which are allocated on the center of the H-UDI port connector, must be connected to GND.
• When an MCU incorporating the AUD with the SSTL18 specification (e.g., the SH7785) is used, the emulator is
used with the same circuit as for the E200F. For details, refer to the E200F emulator additional document
(Supplementary Information on Using the SHxxxx).
25
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Note
H-UI Port connector
(top view)
E10A-USB Lite
Nickname: E10A-USB Lite
Product Name: HS0005KCU11H
Features
- Supported device groups
H8S/ H8SX/ SH-2/ SH-2A
These 4-device group licenses are pre-installed at shipment.
- The other device group license can not be added to E10A-USB Lite.
- Renesas will ship E10A-USB Lite to oversea customer, but not to Japan.
- Debug function of E10A-USB Lite is same as HS0005KCU01H.
- Low price.
26
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
The pin number assignments of the connector
(14-pin type)
The pin number assignments of the 14-pin connector differ from
those of the E8 emulator. however, the physical location is the same.
8⇒⇒⇒⇒⇒⇒14
2⇒⇒⇒⇒⇒⇒14
1⇒⇒⇒⇒⇒⇒7
E10A-USB
1⇒⇒⇒⇒⇒⇒13
E8
The pin number assignments of the connector differ from
those of the connector manufacturer.
27
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
The function of the download to the external
Flash memory for SH
The E10A-USB emulator for SuperH family (SH7047F/SH7144F/SH7145F
is excluded) have the function of the download to the external Flash memory.
This function supports only the download of the program, and cannot edit the
data of external Flash memory in the memory window. Moreover, the software
break cannot be set to the program in the external Flash memory.
Please use the hardware break.
28
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Preparation to download program to the external
Flash memory (1)
1.
Creating the write and erase modules
2.
Setting to download the user program
to the external Flash memory
When E10A-USB download the program
to the external Flash memory, SH microcomputer
on the User system writes data to the external Flash memory.
When E10A-USB write to the external Flash memory,
the writing method (address and how to send data)
is different according to each Flash memory manufacturer
and the width of connected bus.
It is necessary to make the program (write and erase modules)
for writing the user program to the external Flash memory.
Please confirm the data sheet of the external Flash memory
and make the program (write and erase modules) .
3.
Downloading the program
29
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Specification of Write and erase modules
30
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Preparation to download program to the external
Flash memory (2)
1.
Creating the write and erase modules
The download function of E10A-USB usually writes
the program to RAM area.
2.
Setting to download the user program
to the external Flash memory
When E10A-USB download the program to the external
Flash memory, it is necessary to use the write
and erase modules, and write the user program.
Therefore, it is necessary to set the [Loading flash memory]
page in the [Configuration] dialog box to download
the user program to the external flash memory.
E10A-USB transfer the write and erase modules to RAM
(internal RAM is also available) in the user system,
and use them.
3.
Downloading the program
31
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Preparation to download program to the external
Flash memory (3)
1.
Creating the write and erase modules
2.
Setting to download the user program
to the external Flash memory
3.
Downloading the program
32
©2007. Renesas Technology Corp., All rights reserved.
Please download the user program
which you want to download to the external flash memory
using the program loading function as well as the program
download to RAM area.
At first, E10A-USB transfer the write and erase modules
to RAM area that is specified, and use them to download
the user program to the external Flash memory.
The download time of the E10A-USB emulator
is usually 400 KB/second.
However, it takes more time to download
to the external Flash memory, because the time
that is transferred and written to the Flash memory
is necessary.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Introduce of application note
It is possible to download the sample program and the application notes
that introduces the point of customize, and the setting of the Loading
flash memory page from the following WEB.
• E10A-USB site
http://www.renesas.com/fmwk.jsp?cnt=e10a_usb_tools_product_landing.jsp&fp=/
products/tools/emulation_debugging/onchip_debuggers/e10ausb/
→ Flash memory download program for the E10A-USB*
*: Flash memory manufacturer that can download it from WEB
Intel
Fujitsu
(Renesas Technology)
The sample program for 32-bit bus that uses four Flash memories (G28F640J5-150)
made by Intel is appended to the E10A-USB emulator.
33
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Content of application note
34
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Download information on the WEB
35
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
The function of download to the external
Flash memory of E10A-USB for H8SX and H8S (1)
The E10A-USB emulator for the H8SX supports debugging in the external flash memory.
• Function
E10A-USB emulator for the H8SX supports the following function.
(1) The function of download program to the external Flash memory
(2) Setting of software break to the external Flash memory
(3) Editing the data of the external Flash memory in the memory window
• Target MCU
H8SX/1544F, H8SX/1543F, H8SX/1651
H8SX/1653F, H8SX/1654F, H8SX/1663F, H8SX/1664F
The new products of H8SX will use the function of download to the external Flash memory.
In H8S family, only the SoC installed on the H8S can use the function of download
to the external Flash memory.
H8S/2426F,H8S/2424F,H8S/2456F and H8S/2454F are under planning.
36
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
The function of download to the external
Flash memory of E10A-USB for H8SX and H8S (2)
• Application note
It is necessary to make the program (write and erase modules) for writing the user program to the external Flash memory.
Please confirm the data sheet of the external Flash memory and make the program (write and erase modules).
It is possible to download the sample program and the Application Notes that introduces the point of customize,
and the setting of the External Flash memory setting page from the following WEB.
• E10A-USB site
http://www.renesas.com/e10a_usb
→ Flash memory download program
37
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E10A-USB Emulator information on the WEB
http://www.renesas.com/e10a_usb
Here is a site for
software version
and support
microcomputer
information.
Here is a site for
external flash memory
download program.
Here is a site for emulator
related documents.
Here is a site for
Debug MCU
Board.
Here is a site for FAQ.
Here is a site for software
version-up program.
Here is a site for
HS0005ECK01H.
38
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E200F Emulator
39
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E200F Supported Device Roadmap
′06/S
Target
MCUs
′07/K
R5F708xxA
SH7263
R5F71464R
SH7203
R5F7149xR
′07/S
NOW
SH7142
SH7764
SH7780 for
R0E0200F2EMU00
SH7243
SH7285
SH7781 for
R0E0200F2EMU00
SH-MobileR
(SH7722)
Improvement
40
Install Manager was introduced.
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
′08/K
SH-2A core next
SH-4A core next
SH-Mobile series next
Feature of E200F
(1) Real time emulation
- The Real time emulation is available in the highest operation frequency of CPU
and peripheral I/O.
(2) Break function
Hardware brakes
- Brake built in device: max 10 (differ by microcomputer)
- AUD brake: max 8 (differ by microcomputer)
- Bus brake (In case connecting external bus trace unit): 6
Software brake
- 1000 points
(3) Trace function
- CPU internal trace by AUD: 256 Kcycles in maximum
a) Branch address
b) Data in the specified memory area
c) Valuables that assigned to general registers
- External bus trace with optional "external bus trace unit": 256 Kcycles in maximum
(4) Performance analysis function (operate without stop program)
- Point-to-point measurement. Execution count measurement.
- Number of cache miss. Analyze system bus. Measure the number of CPU various event.
(5) Function of real time profile (operate without break the program)
- Time and pass count for each function
41
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
System Configuration of E200F (PC interface)
PC interface
USB cable (USB 2.0)
HOST: Windows PC
HEW (High-performance
Embedded Workshop)
Target system
Notice: E10A-USB Emulator software for SH requires SuperH RISC engine C/C++ compiler package Ver.6 or later.
Microcomputer of SH-4A core and SH4AL-DSP core requires SuperH RISC engine C/C++ compiler
package Ver.8 or later.
Microcomputer of SH-2A core requires SuperH RISC engine C/C++ compiler package Ver.9 or later.
42
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E200F emulator for SH7785
- R0E0200F2EMU00 -
• E200F full-spec emulator with enhanced debugging functions
Achievement of 600-MHz trace
(AUD clock = 300 MHz, Double Data Rate).
The SSTL18 trace technology that is the new method
of the AUD trace method is established.
• Function of automatic adjustment of trace data
The substrate design guideline etc. to the user system are only the routings
with exactly the same wire-length, and impedance matches (50 Ω).
The function for the self adjustment of the trace timing
when the emulator starts is provided.
It is possible to trace it always best according to this function
of automatic adjustment.
• New design in H-UID/AUD probe
38-pin Mictor connector that is becoming an industry-wide standard
is newly adopted and it corresponds to speed-up.
(2-767004-2 Tyco electronics AMP)
43
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
impedance matches (50 Ω)
SH7785
38-pin
Mictor connector
AUD signal
the same wire-length
Function outline by product (1)
44
1. E200F main unit
1. E200F basic function is as same as E10A-USB.
The followings are the added function on the E10A-USB.
2. USB2.0 (High-speed communication with host PC)
USB1.1 (Full-speed communication with host PC)
3. 256-Kcycle trace acquisition.
4. Conditional trace is available by AUD trace information
analyzing.
Trace start/stop, sequential condition match trace
5. Performance analyzing is available without break the program.
Performance channel: 4 in max (point to point,
execution time measurement of the address range.)
6. Real-time profiling is available without break the program.
Performance profiling for each function.
2. External bus trace unit
1. Allows external bus trace
2. Burst ROM and DDR-SDRAM trace are not supported.
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Function outline by product (2)
45
3. Evaluation chip unit
1. Allows debugging without user system.
2. Allows debugging using AUD for AUD nonsupport device.
3. Allows debugging using AUD for non-mounted H-UDI/AUD
connector.
4. Evaluation chip unit is used with User interface board.
4. User interface board
1. User interface board is necessary to connect Evaluation
chip unit to the user circuit board.
2. User interface board is different in the each package.
3. User interface board is connected to the IC socket of the
user circuit board.
5. Trace cable
1. Trace cable connects E200F main unit and a Trace unit and
Evaluation chip unit.
2. When two or more optional products are attached,
only one trace cable can be used.
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Function outline by product (3)
6. Expansion profile unit
1. Comparison with standard configuration
Real-time profile function
- Function measurement should be within the range
of 12 MB (4 MB for standard component)
from an AUD terminal output of the CPU.
Execution time of function
Number of the function calls
- Number of function counted: 60/20 k for standard configuration
46
7. Peripheral I/O analyzer unit
1. MFI bus trace and MFI terminal information analyzing
are available when the debug target is an
SH-Mobile Series CPU.
The hardware configuration of peripheral I/O analyzer unit
for SH-Mobile3 is just ONE CABLE, without any boards.
8. Emulation memory unit
(8 Mbytes/16 Mbytes)
1. Emulation memory (8 MB/16 MB)
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E200F Emulator information on the WEB
http://www.renesas.com/e200f
Here is a site for emulator
related documents.
Here is a site for software
version-up program.
Here is a site for FAQ.
47
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
MEMO
48
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E10T-USB Emulator
49
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Features and target device by E10T-USB
Features
• Debugging is enabled using the actual MCU on the user system
• The included USB interface makes the E10T-USB usable with either a laptop PC
or desktop PC.
• Cheaper than full specification emulators
• Can also be used as the flash memory programming tool
• High-performance Embedded Workshop which runs on Windows 2000 and XP
is provided
Target device: H8/3048BF (F-ONE), H8/3029F
Type number: HS0005TCU01H
Caution
• Need the H8S, H8/300 C/C++ compiler package Ver.4 or later.
50
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E10T-USB Emulator System Configuration
High-performance
Embedded
Workshop
E10T-USB
HS0005TCU01H
Actual MCU
H8/3664F
User system interface
cable
Dedicated port connector
(E10T compatible)
User system
Personal computer
* The program must be downloaded to the internal flash memory.
51
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E10T-USB Emulator information on the WEB
http://www.renesas.com/e10t_usb
Here is a site for emulator
related documents.
Here is a site for software
version-up program.
52
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E8a Emulator New Release
53
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E8a Emulator System Configuration
Development environment is unified to previous
emulator debuggers.
or
E8, E7 compatible 14-pin
user interface connector
Actual MCU
User system
The High-performance Embedded Workshop: a graphical user interface
that lets users build and debug applications from the same window.
Attention: The debug function is not supported for SH, H8SX, and H8S micons.
54
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Communication between
R8C/Tiny
(except R8C/10-13) and
the E8 emulator only
requires a single MODE
pin. You can use all
user pins for debugging.
E8a Supported Device Roadmap
′07/4
′08/4
NOW
Target MCUs
38D2
R8C/2E,2F
R8C/2G,2H
R8C/2J
R8C/2K,2L
M16C/30P
M16C/64
H8/38547
H8/38537
H8/38524
H8/38504
Improvement
V.1.01 R00
Ver.1.00 R00
V.1.02 R00
′07/7
E8a is released
55
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Features of the E8a emulator
E8a Emulator is an on-chip debugger and is a flash memory programmer also.
Reasonably priced and packed with special features, E8a products fully support speedy market-entry
for the low-cost system products. Not only sophisticated various debug features with
High-performance Embedded Workshop, E8a offers flash memory programming features by using
Flash Development Toolkit.
Applicability of programming function for on-chip flash memory extended to
all Renesas microcontroller families
E8a Emulator’s programming function for on-chip flash has been extended to cover previously
unsupported Renesas products, such as SuperH™ Family and H8S Family microcontrollers.
But, you need the FDT Ver.4 or upper version to use this function.
Use of environment-friendly materials
With the environment in mind, vegetable-based polylactide, a biodegradable plastic material, is
used for the case. And also, the E8a emulator uses a lead-free design.
New design offering ultra-compact dimensions
The new design features Renesas Technology's trademark red color-based and offers ultra-compact
dimensions of 92 mm × 42 mm × 15 mm. The E8a Emulator has been reduced in volume to
approximately 40% that of the E8 Emulator while inheriting its emulation functions and ease of use.
56
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
State of Support for MCUs by the E8a Emulator
(as a Programming Tool)
The combination of the E8a emulator and development toolkit (Flash Development Toolkit V.4.00)
enables on-board programming. This combination can support SH, H8SX, and H8 Family MCUs
with flash memory that are not supportable by the E8 emulator.
Refer to the following URL for details of the MCUs supported by the E8a emulator and
version 4.00 of the Flash Development Toolkit.
http://www.renesas.com/media/products/tools/flash_prom_programming/flash_development_toolkit/ver_4/rej10j1669_flashtoolkit_s.pdf
Configurations as a Programming Tool
Note: 1. The programming of 740 Family
products (QzROM versions) requires
an IC socket board.
Boards for some other products are
under development. Refer to the
Schedule of Main Tool Products on the
RSSI site for the schedule.
2. The E8a emulator cannot be used in
the debugging of SH and H8SX
Family products. When this is required,
the E10A-USB on-chip debugging
emulator must be used instead of the
E8a.
Serial (RS-232C) cable
IC socket board
Flash Development
Toolkit Ver.4.XX
USB adopter board or E8a
Serial (RS-232C) cable
MCUs supporting USB-boot
57
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
Changes and Additions to Functions (1)
Better Usability!
740
R8C M16C M32C
H8
The macro function can be used to set break events.
This command enables recording of the operation of setting break events.
Better Usability!
H8
Break event settings can be tracked in source files in the same way as
software break settings. Setting information are saved with the session.
Therefore, the break event settings can be recovered automatically
on the next start-up.
Better Usability!
740
R8C M16C M32C
Improved methods of selecting MCUs.
1 Application of group names to extract MCUs
2 Selection of device part numbers.
58
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
NEW
Changes and Additions to Functions (2)
Better Usability!
R8C M16C M32C
Event breaks can now be set during program execution.
Better Usability!
H8
The frequency input dialog box is not displayed for MCUs
with fixed communications frequencies.
Better Functionality!
740
R8C M16C M32C
“Debugging in the CPU programming mode” has been added as a dedicated mode
for the debugging of programs that apply the CPU programming mode.
Conventional
(Flash memory to PC)
A break might take time because data
are read from all areas.
New mode
59
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
A break does not take time because data
are only read from the necessary areas.
However, software breaks and
changing an area of flash memory
in the memory window are not possible.
NEW
Changes and Additions to Functions (3)
*Not supported for the R8C/10 to 13 Groups.
Better Functionality!
R8C M16C M32C
A start/stop function has been added, allowing the execution of routines specified
by the user immediately after the user program is stopped or immediately before it starts.
The user can thus have the selected functions run when the program stops
because of a break or is restarted after a break, etc.
1. Specify a user routine to be executed immediately
before execution of the user program starts
(immediately after the “Execute” button is clicked).
2. Specify a user routine to be executed immediately
after the user program is stopped
(immediately after the “Stop button” is clicked
and immediately after a break condition
is matched to stop the program).
The specifications for the indicated routines include restrictions.
If these restrictions are not observed, the emulator may not operate properly.
Be sure to read the user’s manual before using the software.
Better Functionality!
740
Control signals (e.g. reset) used by the E8a emulator
are cleared after the end of programming,
and the execution of a user program can be selected
in the flash-memory programming mode.
However, this is only selectable when power
is not being supplied by the E8a emulator.
60
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
R8C M16C M32C
E8a Emulator information on the WEB
http://www.renesas.com/e8a
Here is a site for
emulator related
documents.
Here is a site for switchover
from E8 to E8a
Here is a site for software
version-up program.
61
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
MEMO
62
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000 Emulator
63
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000 System Configuration
High-performance
Embedded Workshop
Host computer
LAN
Optional
LAN
adapter
E6000
User system interface cable
(Optional)
PCI board
PC Interface
cable
PCMCIA card
E6000 station
External probe
User system
USB adapter
Attention: Two or more E6000s cannot be used at the same time when connecting them with one PC by using USB interface.
64
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Features of the E6000
• Compact size
- 220 × 160 × 57 mm
• Oscillation circuit at the end of the user system interface cable
• Easy-to-use debugging functions due to environment
supporting Windows (Windows 2000 or XP)
Since the High-performance Embedded Workshop is supported,
the debugging and the build can be performed in the same window.
Need the H8S, H8/300 C/C++ compiler package Ver.4 or upper version.
• Software development efficiency improved by C-source level
debugging functions (applicable to optimized programs as well)
• Break and trace trigger using the event detection circuit
- Input condition: Address bus, data bus, R/W, and external probe etc.
- Count of events: Delay-count specification function
- Sequential specification function
- Event interval time measurement function
• Break functions
- Software break: 256 points
- Hardware break: 12 points max.
• Trace modes
- Free trace, range trace, filter, suppress, trace stop, time stamp and delayed stop
65
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Options of the E6000
E6000 station
(Including the High-performance
Embedded Workshop)
User system
interface cable
Host system
interface
(PCMCIA,
PCI, LAN, USB)
PC
User system
Add-on memory
SIMM
Bus monitor
Note: The bus monitor is provided as standard or optional depending on the supported MCU.
66
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000 Optional I/O Board
Type 1 Optional board list
Supported device
Type 1
Inserted into the E6000 emulator station
H8S/2258
Group
E6000 emulator
HS2633EPI61H
Type 2 Optional board list
Optional I/O board
Supported device
Optional I/O board
H8S/2140B
HS2140EIO61H
(LPC board)
HS2160EIO61H
(LPC board)
HS3857EIO60H
(Expansion board)
H8S/2160B
H8/3857 Group
Type 2
Connected between the E6000 emulator station
and the user cable
Optional I/O board
Optional I/O board
HS2258EIO61H
(IEBus)
H8/3854 Group
HS3854EIO60H
(Expansion board)
H8/3937
HS3937EIO60H
(FLEX decoder board)
H8/3937R
HS3937REIO60H
(FLEX decoder board)
H8/36057, 36037
Group
H8/36024 Group
H8/36049 Group
H8/36912 Group
E6000 emulator
HS2140EPI61H
HS3L08EPI60H
+
HS3834EVI60H
HS388REPI60H
HS36037EIO61H
(H-CAN board)
HS36024EIO61H
(Serial board)
HS3664EPI62H
H8/36902 Group
H8/36109 Group
67
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
HS36109EIO61H
(Serial board)
HS3664EPI62H
E6000 Emulator information on the WEB
http://www.renesas.com/e6000
Here is a site for emulator
related documents.
Here is a site for software
version-up program.
68
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Compact emulator for H8/300H Tiny series
69
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Features
Despite being small, the compact emulator incorporates
rich debugging functionality, including real-time tracing,
making it competitive with full-spec. emulators.
Also, it is a low-price emulator.
• Compact design and low price
Much smaller main unit than conventional emulator
system. Low price due to mounting frequently-used
functions only.
Compact emulator for the H8/300H Tiny series
• Includes a set of development tools
(integrated development environment, compiler, and debugger)
Function-limited cross software tool is also included with emulator main unit, enabling
the development and debugging of application programs immediately after purchase.
When H8 device is used, need the H8S, H8/300 C/C++ compiler package Ver.4
or upper version.
• Rich debugging functionality
Though low-priced, this emulator incorporates functions necessary for actual development.:
Real-time trace, hardware break, and real-time RAM monitor, etc.
• Prepare a power supply which complies with CE marking requirements separately. (Spec. 5.0 V ±5% (DC))
The power cable is included with this product.
Electrode (+)
φ1.7 mm (Inside diameter)
Electrode (-)
φ 4.75 mm
Power connector specifications
70
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Applicable plug specifications
Function Comparison: Compact and Full-Spec
Emulators for H8/300H Tiny Series (Reference)
Function
MCU mode
Emulation memory
Software breakpoints
Hardware break
Compact Emulator R0E436640CPE00
Single-chip mode
External SRAM
64 points
2 points (switchover with trace point)
Prefetch/access
Combination of
hardware breaks
Exception detection
AND/OR/Synchronous AND
Bus count: 255 times
Real-time trace
64 Kcycles
Address, data, read/write cycle, memory
area types, status
Whether to write or not when an event
occurs
—
Trace mode
Free/full/point
Real-time RAM monitor 1 KB (256 B × 4 blocks) data/last access
Time measurement
Max. 30 hrs (100 ns) between program
execution and program stop.
Performance
—
Coverage
Trigger output
External trigger input
I/F between hosts
—
—
—
USB interface (USB1.1, Full speed)*
Dimensions
96.0 × 60.0 × 37.8 mm
Full-spec Emulator E6000
Single-chip mode
External SRAM
256 points
12 points (shared with trace point)
Prefetch/access
PC break
AND/OR/sequential (Maximum 8 levels)
Bus count: 65,535 times
Write protected break
Guarded area break
32 Kcycles
Address, data, read/write cycle, memory area types,
status, external interrupt signals, 4 external probes,
specified address data, time stamp
Free/point
2 KB (256 B × 8 blocks) data/final access
Max. 4800 hrs between program execution and program
stop (setting up resolution variable).
Max. execution time measurement: 8
Max. subroutine execution measurement: 65,535
—
2
4
PCI/PCMCIA/LAN (optional)
USB interface (USB1.1, Full speed)*
219.0 × 170.0 × 54.0 mm
*: Can be connected to USB2.0 supporting host device
71
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Compact Emulator Support Groups for
the H8/300H Tiny Series
• Bundled with accessory (by MCU package) and compact emulator body
MCU group
package type
package number
type number
product component
H8/3664, H8/3694
H8/3687, H8/36064
H8/36087, H8/36079*
H8/36077*, H8/36094*
64-pin and
0.8-mm-pitch QFP
PRQP0064GB-A
(FP-64A)
R0E436640CPE10
Compact emulator body R0E436640CPE00
and conversion board for 64-pin and
0.8-mm-pitch QFP (FP-64A) R0E436640CFG20
H8/3664,H8/3694
H8/3672,H8/36014
H8/3687,H8/36064
H8/36087
64-pin and
0.5-mm-pitch LQFP
PLQP0064KC-A
(FP-64E)
R0E436640CPE20
Compact emulator body R0E436640CPE00
and conversion board for 64-pin and
0.5-mm-pitch LQFP (FP-64E) R0E436640CFK20
80-pin and
0.65-mm-pitch QFP
PRQP0080JB-A
(FP-80A)
R0E436049CPE10
Compact emulator body R0E436640CPE00
and conversion board for 80-pin and
0.65-mm-pitch QFP (FP-80A) R0E436049CFJ10
H8/36079*, H8/36077*
H8/36094*
H8/36049
*: New product
• Separate sales for compact emulator body and conversion board
72
Type number
Product component
R0E436640CPE00
Compact emulator body for H8/300H Tiny series
R0E436640CFG20
Conversion board for PRQP0064GB-A (64-pin and 0.8-mm-pitch QFP (FP-64A))
R0E436640CFK20
Conversion board for PLQP0064KC-A (64-pin and 0.5-mm-pitch LQFP (FP-64E))
R0E436049CFJ10
Conversion board for PRQP0080JB-A (80-pin and 0.65-mm-pitch QFP (FP-80A))
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
Compact Emulator Support Groups for
the H8/300H Tiny Series information on the WEB
http://www.renesas.com/cpe
Click “R0E436640CPE00” to see information
of compact emulator support group for the
H8/300H Tiny Series
Here is a site for emulator
related documents.
Here is a site for software
version-up program.
73
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
MEMO
74
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000H Emulator
75
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000H Roadmap
06/S
NOW
07/S
H8SX/1648
H8SX/1638
Target
MCUs
H8SX/1544
76
07/K
©2007. Renesas Technology Corp., All rights reserved.
H8SX/1658R
H8SX/1668R
Renesas Microcomputers General Presentation
Development Environment - Emulator
08/K
System Configuration of the E6000H Emulator
PC interface
E6000H
Emulator
94 (W) x 222 (H) x 282 mm (D)
PCI board
Evaluation chip
board
PC card
LAN adapter
Install
High-performance
Embedded Workshop
77
©2007. Renesas Technology Corp., All rights reserved.
USB adapter
Renesas Microcomputers General Presentation
Development Environment - Emulator
User system
Features of the E6000H Emulator
• Real time emulation
- Real-time emulation enabled at the chips internal and external
maximum frequency (max. 100 MHz)
• Break functions
- Hardware breaks: Can be set to max 4 independently + UBC break
Software breaks: max 255 points
• Trace function
- Trace capacity: 128 bits x 128-K bus cycles
Trigger points: max 8
• Performance function
- Subroutine execution count measurement module: max 8
Real-time watch function
• Supports multiple platforms
- Windows 2000 and Windows XP
• E6000H Emulator software for H8SX requires H8S, H8/300 C/C++ compiler
package Ver.6 or later.
• E6000H Emulator software for SH requires SuperH RISC engine C/C++ compiler
package Ver.6 or later.
78
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000H Product Lineup and Supported Devices
*: Under development
Target device
SH7059
SH7058S
E6000H main unit
SH7058
HS7058EPH60H
HS7059EPH60H
SH7046, SH7048
SH7148, SH7101
SH7047, SH7049
SH7144
SH7145
H8SX/1650, 1657
H8SX/1653
H8SX/1654
H8SX/1663
H8SX/1664
H8SX/1651
H8SX/1622
H8SX/1638
H8SX/1648
H8SX/1658R
H8SX/1668R
H8SX/1525, 1527
H8SX/1582
H8SX/1527R
H8SX/1544
79
HS7046EPH60H
User system interface
HS7058ECF61H (PRQP0256KB-A (Previous code FP-256H))
HS7058ECB61H (
(Previous code BP-272))
HS7058ECF61H (PRQP0256KB-A (Previous code FP-256H))
HS7058ECB61H (
(Previous code BP-272))
HS7046ECH61H (PRQP0080JD-A (Previous code FP-80Q))
HS7047ECH61H (PRQP0100KB-A (Previous code FP-100M))
HS7144ECH61H (PRQP0112JB-A (Previous code FP-112B))
HS7145ECH61H (PLQP0144KB-A (Previous code FP-144F))
HS1650ECN61H (PTQP0120LA-A (Previous code TFP-120))
HS1653ECN61H (PTQP0120LA-A (Previous code TFP-120))
HS1664ECH61H (PLQP0144KA-A (Previous code FP-144L))
HS1650EPH60H
HS1527KEPH60H
HS1527REPH60H
HS1544EPH60H
©2007. Renesas Technology Corp., All rights reserved.
HS1651ECN61H (PLQP0120LA-A (Previous code FP-120B))
HS1622ECH61H (PLQP0144KA-A (Previous code FP-144L))*
HS1638ECN61H (PLQP0120LA-A (Previous code FP-120B))*
HS1648ECH61H (PLQP0144KA-A (Previous code FP-144L))*
HS1658RECN61H (PLQP0120LA-A (Previous code FP-120B))*
HS1668RECH61H (PLQP0144KA-A (Previous code FP-144L))*
HS1527ECH61H (PRQP0100KB-A (Previous code FP-100M))
HS1582ECH61H (PLQP0120LA-A (Previous code FP-120B))
HS1527ECH61H (PRQP0100KB-A (Previous code FP-100M))
HS1544ECH61H (PLQP0144KA-A (Previous code FP-144L))
Renesas Microcomputers General Presentation
Development Environment - Emulator
User System Interface (Except HS1527ECH61H,
HS1582ECH61H, HS1544ECH61H)
Connection with the Dedicated Connectors
Connection with the IC Socket
Evaluation chip board
Trace cable
Evaluation chip board
Trace cable
User system
interface board
IC socket
Dedicated connectors
User system
80
©2007. Renesas Technology Corp., All rights reserved.
User system
Renesas Microcomputers General Presentation
Development Environment - Emulator
User System Interface (HS1527ECH61H,
HS1582ECH61H, HS1544ECH61H)
Connection with the IC Socket
Cable body
Cable head
User system
interface cable
IC socket
User system
81
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
E6000H Emulator information on the WEB
http://www.renesas.com/e6000h
Here is a site for emulator
related documents.
Here is a site for software
version-up program.
82
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
MEMO
83
©2007. Renesas Technology Corp., All rights reserved.
Renesas Microcomputers General Presentation
Development Environment - Emulator
©2007. Renesas Technology Corp., All rights reserved.
©2007.
Renesas
TechnologyGeneral
Corp., All
rights reserved.
Renesas
Microcomputers
Presentation
Development Environment - Emulator
Download PDF