Crestron CNRACKX-DP Specifications

Crestron CNRACKX-DP Specifications
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
Crestron ST-VC
Volume Control Module
Contents
Volume Control Module: ST-VC
1
Description................................................................................................................................. 1
Functional Description ................................................................................................ 1
Models......................................................................................................................... 2
Physical Description.................................................................................................... 2
Leading Specifications............................................................................................................... 4
Setup .......................................................................................................................................... 6
Preparation for Use...................................................................................................... 6
Identity Code ............................................................................................................... 7
Programming ............................................................................................................................. 8
Programming with the Crestron AppBuilder............................................................... 8
Programming with SIMPL Windows.......................................................................... 8
ST-VC Symbol ............................................................................................................ 9
Example Program ...................................................................................................... 11
Problem Solving ...................................................................................................................... 11
Troubleshooting ........................................................................................................ 11
Further Inquiries........................................................................................................ 12
Future Updates .......................................................................................................... 12
Return and Warranty Policies.................................................................................................. 13
Merchandise Returns / Repair Service ...................................................................... 13
CRESTRON Limited Warranty ................................................................................ 13
Operations Guide - DOC. 5676A
Contents • i
Crestron ST-VC
Volume Control Module
Volume Control Module: ST-VC
Description
Functional Description
The Volume Control Module is a digitally controlled 3-channel audio attenuator.
Each channel has independent settings for volume, treble, bass, and mute.
Transitions between any attenuation settings are “pop” free. The module is ideally
suited to provide full audio control for systems without an IR-controlled integrated
receiver. Choose a mixer, preamp, and amplifier. Then add a Volume Control
Module to complete the system. In some applications the module's separate control
of treble and bass may even eliminate the need for a graphic equalizer.
Volume, bass, and treble ramp times, scaling, preset levels, and volume muting may
be specified on a per-channel basis (within the specified hardware range). Volume,
bass, and treble are fully independent of each other on each channel. All of these
various aspects are specified in software. Volume, bass, and treble control may be
sent to more than one channel via software so as to support stereo applications.
Input impedance and balance are determined by external connections. Refer to the
diagram below. Input and output are completely independent of each other.
Therefore, it is possible to have a balanced input paired with an unbalanced output
and vice-versa.
Examples of Balanced and Unbalanced External Connections
OPTIONAL 600 OHM
TERMINATOR
+
X
+
G
BALANCED INPUT
BALANCED OUTPUT EXAMPLE
+
IN
OUT
X
+
-
IN
OUT
G
UNBALANCED 10K INPUT
UNBALANCED OUTPUT EXAMPLE
The treble and bass controls are independent from volume and are individually
controlled for each channel. Each channel includes a muting relay with 104 dB
attenuation. When the signal driving MUTEA goes high, the muting circuit is
activated providing 104 dB drop from any preset volume level. Likewise channels
Operations Guide - DOC. 5676A
Volume Control Module: ST-VC • 1
Crestron ST-VC
Volume Control Module
“B” and “C” are driving MUTEB and MUTEC, respectively. When the muting
signal goes low, the muting circuit is deactivated and the volume and tone returns to
its original preset level.
NOTE: MUTEALL is an override. All channels are muted when this signal is high.
When it is low, the channels follow the state of MUTEA, MUTEB, and MUTEC.
Each channel is equipped with protective relays that turn ON only after safe
conditions are sustained by the electronic circuitry. This feature protects the output
from “pops” caused by accidental power-down/power-up conditions to the ST-VC.
If the ST-VC is under program control and the power is cycled to the ST-VC, it
renews the volume, bass, and treble levels to the current program settings. The mute
status (per channel and the mute-all) are also restored.
Models
There are two Crestron Volume Control Module configurations available: ST-VC
and STI-VC. Configuration is based on the type of power availability. Use the STVC with a 120V power supply and the STI-VC with a 220V power supply. For
purposes of this Operations Guide, the term ST-VC is used for either configuration.
Physical Description
The ST-VC, shown below, is housed in a black enclosure with silk-screened labels
on the front and rear panels. On the front of the unit there are eight LEDs for
indicating the unit’s current status. All connections are made on the back of the unit.
There are four rubber feet on the base of the unit for stability and to prevent
slippage.
ST-VC Physical Views
1.500 in
(3.810 cm)
6.134 in
(15.580 cm)
6.322 in
(16.058 cm)
6.940 in
(17.628 cm)
7.066 in
(17.948 cm)
1.700 in
(4.318 cm)
2 • Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
ST-VC Ports
A number of ports are provided on the back of the ST-VC. Each has a silk-screened
label. Refer to illustration and descriptions below.
ST-VC Ports
12 VDC .5 A
NOTE: An external power pack is not supplied with the ST-VC. When the ST-VC
is used as part of the Cresnet system, there is no need for a power pack. The unit gets
its power from the network connection. A power pack is only necessary if the STVC is used with the STS system or as a stand-alone device. If either of these two
STS system applications apply, the optional power pack can be purchased
separately.
This direct current (DC) power socket connector is used to supply power via the
external power pack. Crestron recommends specific power packs for its devices. The
designated power pack for the ST-VC is Crestron part number PW-1205 (PWI-1210
for international use). If a power pack other than this Crestron model is obtained,
verify that it meets the required specification and polarity as shown after this
paragraph.
Power Pack Specification
CRESTRON POWER PACK
INPUT SPECS
OUTPUT SPECS
PW-1205
PWI-1210
120VAC~60 hertz (Hz)
230VAC~50Hz
12VDC 0.5A
12VDC 1.0A
Power Pack Output Connector Polarity
NET
These two 6-pin, 6-position RJ11 modular jacks are used to connect the ST-VC
module to either the SmarTouch STS or Cresnet remote control system. When the
module is part of the Cresnet system, power is provided via the NET connection; the
power pack need not be attached. Two NET ports are available so that network units
can be daisy-chained together.
NOTE: When making network connections, refer to the latest revision of the
Network Modular Cable Requirements (Doc. 5682). The documentation can be
obtained from the Downloads section of the Crestron website (www.crestron.com).
Search for the MODULAR.PDF file.
NOTE: Most 4-connector phone cables are wired in a crisscross fashion and are not
compatible with Crestron equipment.
Operations Guide - DOC. 5676A
Volume Control Module: ST-VC • 3
Volume Control Module
Crestron ST-VC
If power pack is attached when module is part of the Cresnet system, power is drawn
from the power pack. The module does not load the network power, but the network
power remains chained.
G (Chassis Ground)
Use this chassis GND screw to ground the unit to the amplifier and audio source
common GND.
Channels A - C
Connect these balance/unbalanced input (IN) ports to the AUDIO OUTPUT of any
A/V equipment that needs volume, treble, and bass control. Connect the
balance/unbalanced output (OUT) ports to an amplifier. The output stage is
disconnected by each relay and connects the + and - lines to the signal ground when
muted.
ST-VC Indicators
There are eight LED indicators located on the front panel of the ST-VC. Refer to
illustration and descriptions below.
ST-VC Indicators
PWR (Power)
This green LED illuminates when power is supplied to the ST-VC.
NET
This yellow LED illuminates when communication between either the SmarTouch
STS or Cresnet system and the ST-VC is established. Illumination indicates that the
SIMPL program currently loaded has a network device defined at the same ID as the
ST-VC.
V & T (Volume & Tone)
These red LEDs (one pair per channel) illuminate when there is volume (V) or tone
(T, i.e., treble and bass) activity on any of the three channels. Activity includes
increase, decrease, or mute.
Leading Specifications
The three tables after this paragrpah provide a summary of leading specifications for
the ST-VC module and volume and tone particulars.
4 • Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
Leading Specifications of the ST-VC
SPECIFICATION
Power Requirements
DETAILS
12VDC external power pack or
24VDC, 0.25A, 6W - network
Default NET ID
10
Crestron Application BuilderTM
Crestron Application Builder
TM
TM
Version 1.0.9 or later1 & 2
Templates
®
Version 1.4 or later2
SIMPL Windows
Crestron Database
Version 1.40.07 or later2
Version 12.1.4 or later for SmarTouch Wizard
support or 12.1.3 for regular support2
2-Series Control System Update3
CNMSX-AV/PRO Upgrade File
Version C2-1008 or later4
Version 5.10.11x or later5
CNRACKX/-DP Upgrade File
Version 5.10.11w or later5
CEN/CN-TVAV Update File
Version 5.12.05v or later5
ST-CP Update File
Version 4.01.00s or later5
Height: 1.70 in (4.31 cm)
Dimensions & Weight
Width: 7.07 in (17.95 cm)
Depth: 6.32 in (16.06 cm)
Weight: 2.20 lb (1.00 kg)
1
This product is supported in the Crestron Application Builder Software, both in the Residential and
Commercial versions. Contact Crestron Customer Service for licensing details.
2
The latest software versions can be obtained from the Downloads section of the Crestron website
(www.crestron.com). New users are required to register in order to obtain access to the FTP site.
3
Crestron 2-Series control systems include the AV2, AV2 with Card Cage, CP2, CP2E, PAC2, PRO2,
and RACK2.
4
Filenames for 2-Series control system update files have a CUZ extension and can be obtained from
the Downloads section of the Crestron website.
5
CNX upgrade files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX
upgrade files have a UPZ extension and ST-CP files are in one EXE or zipped UPZ file. All can be
obtained from the Downloads section of the Crestron website. Update files are
specifically designed for certain control systems. If an update file is loaded into a control system
other than the device for which it was intended, it may lockup the control system, which would then
have to be returned to Crestron. Update files with an "S" designator are for the ST-CP, "V"
designator for CEN/CN-TVAV, "W" for CNRACKX-DP, and "X" for CNMSX-AV/Pro control
systems. Control systems are able to recognize and reject incorrect update files. However, when
updating control systems, do not ignore Crestron Viewport warning prompts or messages.
Volume Specifications of the ST-VC (Per Channel)
SPECIFICATION
DETAILS
Input Impedance
10K or 600 Ohms
Output Impedance
10 Ohms
Input
Balanced or Unbalanced
Output
Balanced or Unbalanced
Total Harmonic Distortion (THD)
-85 dB
Hum and Noise (ref. 0 Dbv)
-85 dB
Maximum Input Level (Flat Mode)
4V rms
Channel Separation
-90 dB
Attenuation Range (Excluding Mute)
0 to -76 dB (maximum)
Mute
-104 dB
Frequency Response
8 Hz to 60 KHz (-3 dB minimum)
NOTE: A chassis GND screw is provided in the back of the unit to ground the
ST-VC to the amplifier and audio source common ground.
Operations Guide - DOC. 5676A
Volume Control Module: ST-VC • 5
Crestron ST-VC
Volume Control Module
Tone Specifications of the ST-VC (Per Channel)
SPECIFICATION
DETAILS
Flatness (8 to 60 KHz flat mode)
+/- 0.2 dB
Bass Gain Range (100 Hz)
+/- 12 dB
Bass Step Size (100 Hz)
2 dB
Treble Gain Range (10 KHz)
Treble Step Size (10 KHz)
+/- 12 dB
2 dB
As of the date of manufacture, the Volume Control Module has been tested and
found to comply with specifications for CE marking and Australian Compliance
Mark.
NOTE: These devices comply with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference received, including interference
that may cause undesired operation.
Setup
Preparation for Use
Refer to the two hookup diagrams that follow this paragraph. The first diagram
illustrates the connections to SmarTouch STS. The second diagram showns
connections to the Cresnet system. Complete the connections in any order,
regardless of whether the ST-VC is part of SmarTouch STS or the Cresnet system.
SmarTouch STS Hookup Connections for ST-VC
POWER PACK
(500 mA)
(1000 mA
for STI-VC)
6 • Volume Control Module: ST-VC
AUDIO OUT
AMPLIFIER &
AUDIO SOURCE
COMMON GND
NOTE:
USE 2 FOOT SUPPLIED CABLE (CA15717)
TO CONNECT ST-VC TO SMARTOUCH STS.
A/V
EQUIPMENT
INPUT
SMARTOUCH STS
AMPLIFIER
DAISY CHAIN
TO EXPAND
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
Cresnet System Hookup Connections for ST-VC
OPTIONAL
POWER PACK
(500 mA)
(1000 mA
for STI-VC)
AUDIO OUT
AMPLIFIER &
AUDIO SOURCE
COMMON GND
NOTE:
USE ST-CNB (SOLD SEPARATELY) TO
CONNECT ST-VC TO CRESNET SYSTEM.
A/V
EQUIPMENT
INPUT
CRESNET SYSTEM
AMPLIFIER
DAISY CHAIN
TO EXPAND
Identity Code
Every equipment and user interface within the network requires a unique identity
code (NET ID). These codes are recognized by a two-digit hexadecimal number
from 03 to FE. The NET ID of each unit must match an ID code specified in the
SIMPL Windows program. The NET ID of each ST-VC has been factory set to 10.
The NET IDs of multiple ST-VCs in the same system must be unique and changed
from a PC via Viewport, which is available from SIMPL Windows or VisionTools™
Pro-e (VT Pro-e).
NOTE: VT Pro-e is a Windows compatible software package for creating Crestron
touchpanel screen designs.
The method for changing the unit's NET ID is identical regardless of the software
chosen. Complete the following steps to change the NET ID.
Operations Guide - DOC. 5676A
1.
Attach one of the ST-VCs to the control system (verify that the
software is running).
2.
From the SIMPL Windows or VT Pro-e menu, select Tools | Viewport
to open the Crestron Viewport.
3.
From the Viewport menu, select Functions | Set Network ID. The
software checks the baud rate and then opens the "Set Network ID"
window.
4.
In the "Set Network ID" window, select the ST-VC from the Current
Network Devices text window.
5.
From the Choose the new network ID for the selected device (Hex):
text box, select the new NET ID for the ST-VC.
Volume Control Module: ST-VC • 7
Crestron ST-VC
Volume Control Module
6.
Click Set ID to initiate the change. This will display the "ID command
has been sent" window.
7.
In the "Command Complete" window, click OK.
8.
In the Current Network Devices text window, verify the new NET ID
code.
9.
In the "Set Network ID" window, click Close.
NOTE: The new NET ID code may also be verified by selecting Diagnostic |
Report Network Devices in the Viewport (alternately, select F4).
10. Repeat this procedure for each ST-VC to be added to the network.
Programming
The ST-VC can be programmed using various Crestron tools. Crestron AppBuilder
and SIMPL Windows define and set up the functions and actions appointed by the
control system. The control system interprets the button presses on the touchpanel,
carries out the command, and provides feedback to the touchpanel. The AppBuilder
and SIMPL Windows are intended for users with different levels of programming
knowledge. The flexibility of each tool is proportional to the degree of programming
expertise (i.e., the more flexible, the more a programmer needs to know and account
for). Of course, one can initiate programming using the easiest method (Crestron
AppBuilder) and use advance techniques that are available from SIMPL Windows to
customize the job.
Programming with the Crestron AppBuilder
Easiest method of
programming that by itself
does not offer the greatest
amount of flexibility.
The Crestron AppBuilder offers automatic programming for such residential and
commercial applications as audio distribution, home theater, video conferencing,
and lighting. The interface of this tool guides you through a few basic steps for
designating rooms and specifying the control system, touchpanels, devices, and
functionality. The Crestron AppBuilder then programs the system, including all
touchpanel projects and control system logic.
The Crestron AppBuilder is fully integrated with Crestron's suite of software
development tools, including SIMPL Windows, VT Pro-e, Crestron Database, User
IR Database, and User Modules Directory. The Crestron AppBuilder accesses these
tools behind the scenes, enabling you to easily create robust systems.
Programming with SIMPL Windows
SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use
programing language that is completely integrated and compatible with all Crestron
system hardware. The objects that are used in SIMPL are called symbols. SIMPL
Windows offers drag and drop functionality in a familiar Windows environment.
SIMPL Windows is Crestron's software for programming Crestron control systems.
It provides a well-designed graphical environment with a number of workspaces
(i.e., windows) in which a programmer can select, configure, program, test, and
monitor a Crestron control system.
The next three sections describe a ST-VC within SIMPL Windows. The first section
provides initial configuration information, the second section identifies the ST-VC
8 • Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
symbol and defines its inputs, and the final section provides the location of example
program.
NOTE: The following descriptions assume that the reader has knowledge of
SIMPL Windows. If not, refer to the extensive help information provided with the
software.
Configure ST-VC Program
To create a program with a ST-VC, refer to the table below for initial configuration
information.
Configure ST-VC Program
SYMBOL
FOLDER
Device Library,
Control
Systems
Device Library,
Network
Control
Modules
SYMBOL
DROP
REQUIRED WHERE
Desired
control
system
ST-VC
System
Views
System
Views,
Cresnet
Units
ADDITIONAL
SETUP
Refer to the documentation supplied
with the specific control system for
additional setup information.
CHANGE NET ID (OPTIONAL) Double-click on ST-VC (or single-click
then right mouse-click) on ST-VC.
Select Configure. Select NET ID then
select desired hexadecimal ID.
SIMPL is Crestron’s object-oriented programming language designated for easy
implementation of the control system requirements. The objects that are used in
SIMPL are called symbols.
ST-VC Symbol
The diagram after this paragraph shows the ST-VC symbol in SIMPL Windows. The
table following the diagram lists the inputs and their functional descriptions.
Operations Guide - DOC. 5676A
Volume Control Module: ST-VC • 9
Crestron ST-VC
Volume Control Module
Detail View of the ST-VC Symbol in SIMPL Windows' Programming Manager
ST-VC Symbol Input Descriptions
INPUT(S)
FUNCTION(S)
Each channel (A through C) has a corresponding muting relay with
104 dB attenuation. When any of these digital inputs goes high, the
muting circuit provides a 104 dB drop from the current volume level.
When the signal goes low, the volume setting returns to its previous
level.
As long as this digital signal remains high, all channels are muted.
muteall
When this input drops low, all channels return to their previous
volume setting.
Each of these analog inputs are independent of one another. The
volA,
volB, volC analog value of each signal determines the volume setting of the given
channel. Each channel (A through C) can have discrete ramp times,
scaling factors, preset levels, and so forth. Alternatively, multiple
channels can have the same settings to support stereo applications.
Each of these analog inputs are independent of one another. The
trebA,
analog value of each signal determines the treble setting of the given
trebB,
channel. Each channel (A through C) can have discrete ramp times,
trebC
scaling factors, preset levels, and so forth. Alternatively, multiple
channels can have the same settings to support stereo applications.
Each of these analog inputs are independent of one another. The
bassA,
analog value of each signal determines the bass setting of the given
bassB,
channel. Each channel (A through C) can have discrete ramp times,
bassC
scaling factors, preset levels, and so forth. Alternatively, multiple
channels can have the same settings to support stereo applications.
mutea,
muteb,
mutec
10 • Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
Example Program
An example program can be obtained from the Downloads section of the Crestron
website (www.crestron.com). Search for ST-VC.SMW. New users are required to
register in order to obtain access to the FTP site.
This example program illustrates control over a ST-VC network device in a
CNMSX-PRO system. In the example, channels A and B are tied together to provide
control over a stereo source that has a left and right channel. Channel C is for mono
source that only has one channel, such as a microphone. The system also has a
FLAT input which will take the bass and treble levels for channels A, B, and C to
50%.
There is a MUTE ALL that simply toggles the MUTE ALL line on the ST-VC.
When MUTE ALL is engaged, the mute states for A, B, and C are disregarded and
all channels are muted. When MUTE ALL is released, channels A, B, and C will
revert to their previous states.
Problem Solving
Troubleshooting
The table below provides corrective action for possible trouble situations. If further
assistance is required, please contact a Crestron customer service representative.
ST-VC Troubleshooting
TROUBLE
POSSIBLE
CAUSE(S)
Green PWR ST-VC is not
LED does not receiving power.
illuminate.
Yellow NET
Improper NET ID.
LED does not
illuminate.
Loose network
connection.
Channel (A, Improper
B, or C) red
programming.
V/T LEDs do
not illuminate.
Hum on
audio.
Operations Guide - DOC. 5676A
Grounding
problem.
CORRECTIVE ACTION
Confirm that power pack securely plugged into
outlet and that the connector is properly
attached to the ST-VC.
Verify that cables plugged into NET ports are
secure (for Cresnet system only).
Verify that ST-VC NET ID matches NET ID
software program. Refer to "Identity Code" in
this Operations Guide.
Verify that cables plugged into NET ports are
secure.
Confirm signal names and programming logic
so that LEDs respond when functions are
activated. Refer to "Programming with SIMPL
Windows" in this Operations Guide for an
example.
Either connect or remove chassis ground wire.
Volume Control Module: ST-VC • 11
Crestron ST-VC
Volume Control Module
Further Inquiries
If after reviewing this Operations Guide for the Volume Control Module, you can
not locate specific information or have questions, please take advantage of Crestron's
award winning customer service team in your area. Dial one of the following
numbers.
•
In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400.
•
In Europe, call Crestron International at +32-15-50-99-50.
•
In Asia, call Crestron Asia at +852-2341-2016.
•
In Latin America, call Crestron Latin America at +5255-5093-2160.
•
In Australia, call Crestron Pacific at +613-9480-2999.
For local support from exclusive Crestron factory-trained personnel in New Zealand,
call Amber Technologies at +649-410-8382.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of
the ST-VC, additional information and programming examples may be made
available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.
The Downloads page of the Crestron website (www.crestron.com) directs the reader
to the location and description of each update. Check the site periodically for update
availability and its subjective value.
12 • Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
Return and Warranty Policies
Merchandise Returns / Repair Service
1.
No merchandise may be returned for credit, exchange, or service without prior authorization
from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory
and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying
the nature of the problem, name and phone number of contact person, RMA number, and
return address.
2.
Products may be returned for credit, exchange, or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be shipped freight
prepaid to CRESTRON, Cresskill, N.J., or its authorized subsidiaries, with RMA number
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an
RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and
absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products
returned with an RMA.
3.
Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in
materials and workmanship under normal use for a period of three (3) years from the date of
purchase from CRESTRON, with the following exceptions: disk drives and any other moving or
rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1)
year; touchscreen display and overlay components are covered for 90 days; batteries and
incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the
dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in
any application other than that for which it was intended, or if it has been subjected to misuse,
accidental damage, modification, or improper installation procedures. Furthermore, this warranty
does not cover any product that has had the serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall
CRESTRON be liable for incidental or consequential damages of any kind (property or economic
damages inclusive) arising from the sale or use of this equipment. CRESTRON is not liable for
any claim made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any product found defective, without charge for
parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall be
covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed
or implied, nor authorizes any other party to offer any other party to offer any warranty, including
any implied warranties of merchantability or fitness for a particular purpose. Any implied
warranties that may be imposed by law are limited to the terms of this limited warranty. This
warranty statement supercedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered
trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft
Corporation
Operations Guide - DOC. 5676A
Volume Control Module: ST-VC • 13
Crestron ST-VC
Volume Control Module
This page intentionally left blank.
14 • Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
Crestron ST-VC
Volume Control Module
This page intentionally left blank.
Operations Guide – Doc. 5676A
Volume Control Module: ST-VC • 15
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Operations Guide – DOC. 5676A
02.02
Specifications subject to
change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement