Magnavox MDV2300 Owner`s manual

Magnavox MDV2300 Owner`s manual
Owner’s Manual
Please read before using this unit.
DVD/CD Player
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
MDV2300
Supplied Accessories
Contents
• Remote Control (NB691UD/NB093UD)
• Audio / video cables
• SETUP MANUAL
rear of this unit
CB/PB
video cable
Y
L
L
DIGITAL
AUDIO OUT
R
S-VIDEO
OUT
CR/PR VIDEO
OUT
COMPONENT
VIDEO OUT
R
AUDIO COAXIAL
OUT
VIDEO
OUT
rear of TV
AUDIO
OUT
audio cable
ANT. IN
rear of your RF
modulator
VHF / UHF
antenna
RF coaxial cable
or
cable TV
company
RF coaxial
cable
3
4
CHANNEL
ANT. IN
R
L
AUDIO IN
VIDEO IN
TO TV
Set channel 3 or 4
No Antenna (RF) Output!
If your TV only has an Antenna input
(no A / V inputs), you will need a
RF modulator (NOT INCLUDED) to
connect this player.
ANT. IN
TV
RF modulator
3
4
CHANNEL
L
VIDEO IN
R
AUDIO IN
TO TV
ANT. IN
Connections ...............................................................................6
Connection to a TV................................................................................
V
.6
Connection to an Audio System ...................................................... .7
Rear Terminals......................................................................................... .7
About the Remote Controll ....................................................... .8
Remote Control ...................................................................................... .8
Installing the Batteries for the Remote Control.......................... .8
DVD FUNCTIONS
Playback
k ................................................................................... .9
MP3 Playback
k .......................................................................... .10
Search Functions ......................................................................10
Using Track Search ............................................................................... .10
Using Title / Chapter Search ............................................................. .10
Using Time Search ................................................................................ .10
On-Screen Displayy ................................................................... .11
Repeat / Random / Programmed Playback
k ............................ .12
Repeat Playbackk .................................................................................... .12
Repeat A-B Playbackk ............................................................................ .12
Random Playbackk ................................................................................. .12
Programmed Playback........................................................................
k
.12
Special Settings ........................................................................13
Subtitle Language................................................................................. .13
Audio Language .................................................................................... .13
Camera Angles....................................................................................... .13
Black Level Setting................................................................................ .13
Stereo Sound Mode ............................................................................. .13
DVD Setting ..............................................................................14
LANGUAGE Setting............................................................................... .14
DISPLAY Setting..................................................................................... .15
AUDIO Setting........................................................................................ .15
PARENTAL Setting ................................................................................ .16
OTHERS Setting...................................................................................... .16
Reset to the Default Setting
(Except for PARENTAL Setting) ........................................................ .17
Note:
INFORMATION
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF modulator.
Troubleshooting Guide ............................................................17
Specifications ...........................................................................17
Españoll .................................................................................... .18
LIMITED WARRANTY
Y.................................................... back cover
SETUP
SETUP
DVD FUNCTIONS
If your TV has antenna in jack only, it is still possible to
connect this unit to your TV by using an RF modulator. In
this case, follow the instructions below.
1) Disconnect the power cords of the devices from the
AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least used in
your area. If your RF modulator has a modulator/
antenna switch, set it according to the manual
supplied with the RF modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the
RF modulator.
INFORMATION
Connecting to RF Modulator (Not Supplied)
Español
Safety Instructions.....................................................................2
About the Discs ..........................................................................5
Playable Discs.......................................................................................... .5
Unplayable Discs .................................................................................... .5
PRECAUTIONS
PRECAUTIONS
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
or visit our web site at
www.magnavox.com/support
© 2012 Funai Electric Co., Ltd.
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 1
2012/01/30 17:42:49
PRECAUTIONS
Safetyy Instructions
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
PRECAUTIONS
TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The important note and rating are located on the rear or
bottom of the cabinet.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer,
or sold with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority
to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
EN
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 2
–2–
2012/01/30 17:42:51
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to
service this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates
copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
PRECAUTIONS
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided. Make sure to leave a space of 3.9 inches (10cm) or more around this apparatus.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD player, please contact our customer service center.
–3–
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 3
EN
2012/01/30 17:42:52
TRADEMARK INFORMATION
MAINTENANCE
Servicingg
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratories.
PRECAUTIONS
ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money
and protect the environment through energy
efficient products and practices.
SYMBOLS USED IN THIS MANUAL
The following symbols appear in some headings in this manual.
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 17 before returning the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our help line
mentioned on the front page to locate an authorized service
center.
Cleaningg the Cabinet
• Wipe the front panel and other exterior surfaces of the unit
with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the
unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the unit.
Cleaningg Discs
Description refers to DVD-video.
: Description refers to audio CD.
: Description refers to CD-RW/-R with MP3 files.
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
Cleaningg the Disc Lens
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center for
inspection and cleaning of the laser optical pickup unit.
Disc Handlingg
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in use.
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd. and
Funai Corporation, Inc. under license from Philips Electronics North America.
© 2012 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored
in any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the
obligation to notify any person or organization of such changes.
EN
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 4
–4–
2012/01/30 17:42:53
About the Discs
Playable Discs
Type
yp of
media
Mark (logo)
DVD-video
Region code
Recorded
signals
Disc size
digital video
(MPEG2)
5 inches
(12 cm)
or
3 inches
(8 cm)
Disc types
or
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9
e.g.)
title 1
title 2
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1 chapter 2
DVD+RW
DVD+R
*1, 4, 5, 6, 8, 9
audio CD
*4, 6, 9
CD-RW
CD-R
*4, 5, 6, 8, 9
audio CD
digital audio
e.g.)
track 1
digital audio
or
MP3
5 inches
(12 cm)
or
3 inches
(8 cm)
MP3
PRECAUTIONS
*1, 2, 4, 6, 9
e.g.)
file 1
track 2
track 3
track 4
track 5
file 4
file 1
folder 1
file 2
file 3
track 6
folder 2
file 2
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back. Even
if they are played back, the sound or video quality will be compromised.
*7: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all. The picture or sound may not be smooth,
etc.
*8: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM / DVD-audio / CD-i / photo CD / video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal
computers / CD-ROM for personal computers / HD DVD / Blu-ray Disc™
On the following disc, the sound MAY NOT be heard.
super audio CD
Any other discs without compatibility indications
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer
cannot be delivered.
–5–
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 5
EN
2012/01/30 17:42:54
SETUP
Connections
Connection to a TV
Method 1
TV
analog audio
Method 2
standard picture
Method 3
good picture
better picture
AUDIO IN
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
L
Y
Y
VIDEO IN
S-VIDEO IN
R
or
and
AUDIO IN
L
R
VIDEO IN
or
CB
or
PB
PR
CR
audio cable
video cable
S-video cable
component video cable
This unit
SETUP
CB/PB
Y
CB/PB
Y
L
L
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
R
VIDEO
CR/PR
OUT
COMPONENT
VIDEO OUT
R
VIDEO
OUT
COMPONENT
VIDEO OUT
CR/PR
S-VIDEO
OUT
AUDIO COAXIAL
OUT
AUDIO OUT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
AUDIO COAXIAL
OUT
COMPONENT
VIDEO OUT
S-VIDEO OUT
Supplied cables used in this connection are as follows:
• audio cable (L/R) x 1
• video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to your TV. If audio/video cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set “PROGRESSIVE”
to “ON” in “DISPLAY” menu. Refer to pages 14-15 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output
at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on
the front of the unit for more than 5 seconds.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
Hitachi:
JVC:
Kenwood:
LXI-Series:
Magnavox:
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
EN
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 6
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
–6–
2012/01/30 17:42:56
Connection to an Audio System
Analog Audio Connection
Digital Audio Connection
stereo system
Audio
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
analog audio
input jacks
L
Digital audio
input jack
R
digital audio
coaxial cable
DIGITAL
AUDIO OUT
audio cable
DIGITAL
AUDIO OUT
This unit
Setting
Connection
AUDIO OUT
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
R
SETUP > AUDIO>
BITSTREAM
Connecting to the other device
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
AUDIO
OUT
SETUP
L
COAXIAL
PCM
* To complete these settings, refer to pages 14-15.
Note:
• The audio source on a disc in a Dolby Digital multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi-channel surround
sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
Supplied cables used in this connection are as
follows:
• audio cable (L/R) x 1
Please purchase the rest of the necessary cables at
your local store.
Rear Terminals
1
2
CB/PB
4
5
Y
L
DIGITAL
AUDIO OUT
R
VIDEO
OUT
COMPONENT
VIDEO OUT
CR/PR
S-VIDEO
OUT
AUDIO COAXIAL
OUT
3
1 S-VIDEO OUT jack
Connect an optional S-video cable here through the S-video in jack of a television.
2 COMPONENT VIDEO OUT jacks
Connect optional component video cable here through the component video in jacks of a television.
3 VIDEO OUT jack
Connect a yellow video cable here through the video in jack of a television.
4 AUDIO OUT jacks
Connect an audio cable here through the audio in jacks of a television or other audio device.
5 DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver.
Note:
• Please purchase the necessary cables at your local store. (Refer to pages 6-7.)
–7–
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 7
EN
2012/01/30 17:42:57
About the Remote Control
Media
Remote Control
Button
(Alphabetical order)
STANDBY-ON
1
2
3
4
5
6
7
8
9
0
+10
• To select track directly. (CD)
• To select folder/file directly. (MP3)
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
AUDIO
ENTER
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
+10
0
A-B
SKIP
SLOW
ANGLE
PLAY
REV
FWD
STOP
SETUP
MODE
ZOOM
TOP MENU
AUDIO
MENU
ENTER
RETURN
CLEAR
SETUP
DISPLAY
REV
Installing the Batteries for the
Remote Control
Install 2 AA (1.5 V) batteries matching
the polarity indicated inside battery
compartment of the remote control.
1
2
FWD
MENU
MODE
OPEN/CLOSE
PAUSE
PLAY
------
• To select audio language on a
disc.
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B repeat.
• To select “STEREO”, “L-ch” or
“R-ch”. (CD)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B repeat.
• To search forward/backward
through a disc.
• To begin slow forward
playback in the pause mode.
• To call up the menu on a disc.
SEARCH
MODE
SETUP
SKIP
STOP
SUBTITLE
TOP MENU
ZOOM
• To search forward/backward
through a disc.
------
• To arrange the playing order or
play randomly.
• To set black level on/off.
• To arrange the playing order or
play randomly.
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To advance playback one frame
at a time.
• To begin disc playback.
• To turn on the unit.
• To return to the previous
operation in menu.
STANDBY-ON
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 8
• To select camera angles on a disc.
RETURN
IR
EN
• To repeat between your chosen
point of A and B.
• To play back a chapter or title
repeatedly.
P-SCAN
• Do not mix alkaline, standard (carbonzinc), or rechargeable (ni-cad, ni-mh,
etc) batteries.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
• To repeat between your chosen
point of A and B.
REPEAT
OPEN/
CLOSE PLAY STOP
Note:
• To move the cursor and
determine its position.
• To display the current disc mode. • To display the current disc mode.
3
* Batteries not supplied.
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight:
approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
• To move the cursor and
determine its position.
• To search chapter, title or time.
• To call up the setup menu.
• To pause disc playback.
• To begin disc playback.
• To turn on the unit.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or disc
repeatedly. (MP3)
• To return to the previous
operation in menu.
• To search tracks.
• To search time. (CD)
• To search folders. (MP3)
• To call up the setup menu.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
• To turn the unit on or to turn the • To turn the unit on or to turn the
unit into the standby mode. (To
unit into the standby mode. (To
completely turn off the unit, you
completely turn off the unit, you
must unplug the AC power cord.) must unplug the AC power cord.)
• To skip chapters or titles.
• To stop playback.
• To stop playback.
• To select subtitles on a disc.
------
• To call up the top menu on a disc.
------
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
------
–8–
2012/01/30 17:42:57
DVD FUNCTIONS
Please note :
• Most instructions in this manual refer to remote control use.
• This unit will automatically turn on the screen saver after 5 minutes of inactivity and enter standby mode after 25 minutes of inactivity.
Playback
y
Lights up when power is on.
Before:
Turn on the TV, amplifier and any other
device which are connected to this unit.
Make sure the TV and audio receiver (not
supplied) are set to the correct channel.
P-SCAN
OPEN/
CLOSE PLAY STOP
IR
2
)
2
2
1
STANDBY-ON
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
Note:
• When you play back a CD-RW/-R with MP3 files,
details on page 10.
• A “ ” may appear at the top-right on the TV screen
when the operation is prohibited byy the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for a
moment. This happens while the 1st layer
y is being switched to
the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “PLAYER MENU”
setting. (Refer to page 14.)
AUDIO
1 Press [STANDBY-ON] to turn on this
unit.
SUBTITLE
ANGLE
7
2 Press [OPEN / CLOSE A] and insert a
disc with label facing up.
3 Press [PLAY B] to start playback.
4 Press [STOP C] to stop playback.
REPEAT
A-B
3
4
8
9
0
+10
CLEAR
SKIP
PAUSE
SLOW
PLAY
REV
2 3 4 1
FWD
STOP
Disc Menu
Fast Forward / Reverse Search
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Use [FWD g] or [REV h] repeatedly during
playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
Callingg Upp a Menu Screen duringg Playback
y
DVD FUNCTIONS
(
on page 10
E1
Note:
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(2x), 2(4x), 3(8x), 4(16x)
and 5(32x).
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
Note:
• Menu operations may vary depending on the disc. Refer to
the manual accompanying the disc for more details.
Slow Forward Search
Press [FWD g] repeatedly in the pause mode
to select the required forward speed.
To continue playback, press [PLAY B].
Resume Playback
y
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen. Press
[PLAY B], playback will resume from the point at
which playback was stopped.
Note:
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32x), 2(1/16x), 3(1/8x), 4(1/4x) and
5(1/2x).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the slow playback mode are blurred. (Refer to pages 14-15.)
• The reverse of slow playback is not available.
R.STOP
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• For MP3, playback will resume from where you stopped (if
the power has been turned off, the playback will start from
the beginning of the track).
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: 2x, 3x, 4x, 1/2x or off.
Paused and Step-by-Step
p y p Playback
y
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
x2
PAUSE
[PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
x3
x4
x1/2
2) Use [K / L / s / B] to slide the zoomed picture across the
screen.
3) To exit zoom function, press [ZOOM] repeatedly to select off.
Note:
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending on
the disc or playback status.
Note:
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
–9–
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 9
1
EN
2012/01/30 17:43:01
MP3 Playback
y
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the
computer and play back the files on this unit.
Note:
• Some selections may take a while to be
recognized.
• Folders are known as groups; files are
known as tracks.
• MP3 files are accompanied by 3 icon.
• Folders are accompanied by
icon.
• Refer to “On-Screen Display” on page 11
for more details.
• If you record data over 20 times, it may
not be played back correctly.
This unit recommends the files recorded
under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 32kbps ~ 320kbps.
Insert a CD-RW/-R with MP3 files, then the file list will automatically appear on the TV screen.
1
Select the desired folder from the list on
the left side in the file list.
004/027
001/013
ENTER
00:00:36
2
Select the desired file from the list on
the right side in the file list.
001/027
OFF
1.
2.
3.
4.
5.
6.
7.
8.
folder1
folder2
folder3
folder4
folder5
folder6
folder7
folder8
3
3
3
3
3
3
3
1.
2.
3.
4.
5.
6.
7.
8.
001/007
ENTER
file name1
3
file name1
file name2
file name3
file name4
file name5
file name6
file name7
file name8
1.
2.
3.
4.
5.
6.
7.
8.
ENTER
00:00:12
OFF
file name11
folder1
folder2
folder3
folder4
folder5
folder6
folder7
folder8
1.
2.
3.
4.
5.
6.
7.
3
3
3
3
3
3
3
file name11
file name12
file name13
file name14
file name15
file name16
file name17
3
ENTER
or
PLAY
Press [ENTER] or
[PLAY B].
or
PLAY
Refer to “Resume Playback” on
page 9.
STOP
Search Functions
Using Track Search
Using Title / Chapter Search
DVD FUNCTIONS
Using [SEARCH MODE]
1
--/26
SEARCH
MODE
00:00:19
OFF
Using Time Search
Using [SEARCH MODE]
1
SEARCH
MODE
--/24
001/002
00:00:30
1
PLAY
03/24
SEARCH
MODE
e.g.) CD
2
3
3
4
5
6
7
8
9
0
+10
Press [ENTER].
--/26
00:00:19
Press [SEARCH MODE] once for the
title search.
For the chapter search, press
cursor [B] to highlight .
OFF
2
ENTER
2
• To play back a double-digit track, press
the track number directly (e.g. for track
14, press [1], [4] and [ENTER]).
• To play back a triple-digit track, press
the track number directly for MP3. (e.g.
for track 114, press [1], [1], [4] and
[ENTER]).
Using [SKIP H , G]
1 PLAY
Current Track
SKIP
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP
3
Enter the desired title or chapter
number within 5 seconds.
1
2
3
4
5
6
7
8
9
0
+10
03/24
---/002
00:00:32
2
3
4
5
6
7
8
9
0
+10
03/24
001/002
- -:- -:- -
OFF
e.g.) DVD
3
Press [ENTER].
1
Press [ENTER].
ENTER
ENTER
Note:
Using [SKIP H , G]
1
PLAY
SKIP
Current Chapter
CH 1 CH 2 CH 3 CH 4
SKIP
SKIP
Note:
• For audio CD, track search is not available for
programmed or random playback.
• Depending on the disc being played
back, this function can also be performed
by directly entering the desired chapter
number with [the Number buttons].
Refer to the manual accompanying the disc.
• For DVD, title/chapter search is not available
for programmed or random playback.
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 10
e.g.) DVD
Enter the desired time within 5
seconds.
OFF
Note:
EN
OFF
[B] to
highlight .
CD: once
DVD: twice
ENTER
ENTER
2
- -:- -:- -
or
Enter the desired track number
within 5 seconds.
1
001/002
OFF
• To play time 0:15:00, press [1], [5], [0],
[0] of [the Number buttons].
• Press [CLEAR] to erase the incorrect
input at step 2.
• For DVD and audio CD, time search
is not available for programmed or
random playback.
– 10 –
2012/01/30 17:43:02
On-Screen Display
p y
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
TR(Track):
current track number / total
tracks
current repeat setting
T(Title):
current title number / total titles
elapsed time of the current title
1
03/24
001/002
00:00:40
1
OFF
01/26
00:00:11
OFF
current repeat setting
DISPLAY
2
elapsed time of the current track
DISPLAY
C(Chapter):
current chapter number / total
chapters
CH(Chapter):
current chapter number / total
chapters
remaining time of the current
chapter
001/002 00:00:19 - 00:01:11
TR(Track):
current track number / total
tracks
remaining time of the current
track
2
NORMAL
01/26
00:00:12 - 00:03:20
NORMAL
current play mode setting
current play mode setting
DISPLAY
DISPLAY
elapsed time of the current track
chapter
ALL:
current track number / total
tracks
remaining time of the entire disc
TT(Title):
current title number / total titles
remaining time of the current
title
03/24
00:00:20 - 00:01:09
3
NORMAL
01/26
00:00:14 - 01:11:28
NORMAL
current play mode setting
current play mode setting
DISPLAY
elapsed time of the current title
elapsed time of entire disc
DISPLAY
4
DVD FUNCTIONS
3
4
Note:
current folder number / total
folders
current file number / total files in
the current folder
• Some DVD will not allow you to set chapter playback correctly.
elapsed time of the current file
current repeat setting
1
004/027
001/013
00:00:36
OFF
file name1
1. folder1
2. folder2
3. folder3
3
3
3
1. file name1
2. file name2
3. file name3
DISPLAY
TR(Track):
current file number / total files in
the current folder
elapsed time of the current file
remaining time of the current file
current play mode setting
2
001/013 00:00:43 - 00:03:36
NORMAL
file name1
1. folder1
2. folder2
3. folder3
3
3
3
1. file name1
2. file name2
3. file name3
DISPLAY
3
file name1
1.
2.
3.
4
– 11 –
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 11
folder1
folder2
folder3
f ld 4
3
3
3
3
1.
2.
3.
4
file name1
file name2
file name3
fil
4
EN
2012/01/30 17:43:05
Repeat
p / Random / Programmed
g
Playback
y
Repeat Playback
Repeat A-B Playback
Repeat function is available only during
playback.
Programmed Playback
You may determine the order in which
chapters or tracks will play back.
1
PLAY
1
1
A-
PLAY
A-B
CHAPTER
REPEAT
MODE
(repeat off)
CHAPTER
(current chapter repeat)
TITLE
(current title repeat)
DVD FUNCTIONS
OFF
TRACK
ALL
(repeat off)
(current track repeat)
A-B
A-B
at your desired ending point (B)
• Point B should be in the same title or
track as point A.
TRACK
(current file repeat)
• To exit the sequence, press [A-B] so
that “OFF” appears.
• To cancel point A, press [CLEAR] at
step 1.
• This function does not work in the
other repeat modes.
DVD-PROGRAM
(current folder repeat)
ALL
(entire disc repeat)
1
2
3
4
5
6
7
8
9
0
+10
1
02
007
--
---
--
---
--
---
05
005
--
---
--
---
--
---
01
002
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
DVD: title and chapter number
CD: track number
MP3: folder and file number
3
RANDOM
PROGRAM
2
Select “PLAY”.
Then press [ENTER].
ENTER
Note:
Select “RANDOM”.
Then press [ENTER].
ENTER
ENTER
Random playback will start.
Note:
• During random playback, you cannot
go back to the previous track, using
[SKIP G] allows you to search
chapters or tracks randomly.
• During DVD random playback, you can
play back chapters in the current title
randomly.
• Some DVD will not allow you to set
random playback.
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 12
2
e.g.) DVD
Press [MODE] once during stop
mode.
NORMAL
MAX:
CHAPTER PLAY ALL CLEAR
• During playback, press [MODE].
CD/MP3: twice
DVD:
three times
Note:
EN
TITLE
• Up to 20 chapters or tracks can be
ordered.
• Enter the desired number with
[the Number buttons].
ENTER
• Repeat setting (except “ALL”) will be
cleared when moving to another title,
chapter, track/file or folder.
• This function is not available with
some discs or during repeat A-B
playback.
Total: 3
Random Playback
MODE
GROUP
ENTER
Note:
This function shuffles the playing
order of chapters or tracks instead of
playback in the sequence.
(repeat off)
PROGRAM
Select “PROGRAM”.
Then press [ENTER].
ENTER
(entire disc repeat)
OFF
RANDOM
• During playback, press [MODE].
CD/MP3: twice
DVD:
three times
2
2
OFF
NORMAL
at your desired starting point (A)
e.g.) DVD
Each time you press [REPEAT], repeat
function changes as example below.
Press [MODE] once during stop
mode.
• To erase all program at once, select
“ALL CLEAR’’ and press [ENTER] or press
[CLEAR] at step 2.
• If the title, chapter, track number is
incorrect, the programmed number
you entered will be skipped during
programmed playback.
• While a program is being played back,
[STOP C] works as follows;
Press [STOP C] and [PLAY B] next, so that
the programmed playback restarts.
Press [STOP C] twice and [PLAY B] next,
so that playback restarts from the first track
in the original order.
However, your programmed playback can
be restarted when you follow the above
steps. (Your programs are still stored until
either the disc is removed or power is
turned off.)
• Some DVD will not allow you to set
programmed playback.
• During programmed playback, you cannot
setup “
TITLE’’ (DVD), “
GROUP’’
(MP3).
– 12 –
2012/01/30 17:43:07
Special
p
Settings
g
Subtitle Language
This unit allows you to select a subtitle
language (if available) during DVD
playback.
Audio Language
Black Level Setting
This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
1
1
PLAY
Adjust the black level to make the dark
areas of the TV picture brighter.
1
PLAY
PLAY
ON
1. ENG/6
1. ENG Dolby D 5.1ch 48k/3
MODE
AUDIO
SUBTITLE
Each time you press [SUBTITLE], subtitle
language changes as example below.
Each time you press [AUDIO], audio
language changes as example below.
ENG (English audio)
ENG (English subtitles)
SPA (Spanish audio)
FRE (French subtitles)
FRE (French audio)
OFF
ENTER
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
3
RETURN
To set subtitle ON/OFF
1
PLAY
1. ENG/6
SUBTITLE
2
Stereo Sound Mode
Note:
• Some discs will only allow you to change
the audio setting from the disc menu. Refer
to the manual accompanying the discs for
details.
• If your language is not shown after pressing
[AUDIO] several times, the disc may not have
that language. However, some discs allow
audio language setting on the disc menu.
(Operation varies depending on the disc, so
refer to the manual along with the disc.)
DVD FUNCTIONS
...
...
OFF (no subtitles)
2
This unit allows you to select a sound
mode during CD playback.
1
PLAY
STEREO
AUDIO
ENTER
OFF
Note:
• If your language is not shown after
pressing [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow subtitle
language setting on the disc menu.
(Operation varies depending on the
disc, so refer to the manual along with
the disc.)
• When “ ” appears on the TV screen,
it means no subtitle is recorded on the
scene.
• Some discs will only allow you
to change the subtitle from the
disc menu. Refer to the manual
accompanying the discs for details.
Camera Angles
Each time you press [AUDIO], sound
mode changes as example below.
Some DVD may contain
scenes which have been shot
simultaneously from various
angles. You can change the
camera angle if
appears on the
screen. If the “ANGLE ICON” setting is
“OFF” in “OTHERS” menu,
will not
appear. (Refer to pages 14-16.)
STEREO
(right and left channels
are active)
L-ch
(left channel is active)
R-ch
(right channel is active)
1
PLAY
1/8
ANGLE
Each time you press [ANGLE], camera
angle changes.
– 13 –
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 13
EN
2012/01/30 17:43:08
DVD Settingg
You can change the settings of the unit.
1
2
Press [SETUP].
Select the desired item.
SETUP
ENTER
ENTER
<SETUP MENU>
LANGUAGE
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE menu
LANGUAGE_AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY menu
TV ASPECT
STILL MODE
PROGRESSIVE
DVD FUNCTIONS
page 14 A
A
PARENTAL menu
PARENTAL_PASSWORD
AUDIO_DRC
DISPLAY_TV ASPECT
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
AUDIO menu
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
page 15 B
DRC
DOWN SAMPLING
DOLBY DIGITAL
PASSWORD
ON
OFF
page 15 C
OTHERS menu
INITIALIZE_INITIALIZE
OTHERS_ANGLE ICON
NO
YES
page 16 D
ANGLE ICON
INITIALIZE menu
INITIALIZE
ON
page 16 E
YES
page 17 F
LANGUAGE Setting
Follow steps 1 to 2 above.
3
4
Select the desired item.
Select the desired language.
ENTER
5
To exit the menu
SETUP
ENTER
ENTER
ENTER
Note:
LANGUAGE menu
AUDIO: 1 2
(Default: ORIGINAL)
LANGUAGE_AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
Sets the audio
language.
SUBTITLE: 1 2
(Default: OFF)
Sets the subtitle
language.
DISC MENU: 1
(Default: ENGLISH)
Sets the language in
DVD menu.
PLAYER MENU
(Default: ENGLISH)
Sets the language
for the on-screen
display.
EN
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 14
LANGUAGE_AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
LANGUAGE_SUBTITLE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
LANGUAGE_DISC MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
OTHERS
LANGUAGE_PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
1
• Language options are not
available with some discs.
• If “OTHERS” is selected in the
“AUDIO”, “SUBTITLE” or
“DISC MENU” screen, select the
desired language using
[K / L / s / B]. Press [ENTER].
LANGUAGE_AUDIO
DUTCH
RUSSIAN
CHINESE
JAPANESE
KOREAN
DANISH
FINNISH
NORWEGIAN
ICELANDIC
ROMANIAN
TURKISH
GREEK
IRISH
PORTUGUESE
POLISH
CZECH
HUNGARIAN
the disc can be selected.
2
• “LANGUAGE” setting for “AUDIO”
and “SUBTITLE” are not available
with some discs. Then press
[AUDIO] and [SUBTITLE]. Details
are on page 13.
– 14 –
2012/01/30 17:43:11
B
DISPLAY Setting
You can change the display functions. Follow steps 1 to 2 on page 14.
3
Select the desired item.
TV ASPECT: (Default: 4:3 LETTER BOX)
See note on the left.
ENTER
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
5
Select the
desired
setting.
ENTER
To exit
“TV ASPECT” or
“STILL MODE”
menu
SETUP
ENTER
ENTER
DISPLAY menu
(Default: AUTO)
See note on the left.
DISPLAY_TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT
STILL MODE
PROGRESSIVE
Select the
desired
setting.
DISPLAY_STILL MODE
TV ASPECT
STILL MODE
PROGRESSIVE
AUTO
FIELD
FRAME
AUTO
FIELD
FRAME
To complete
“PROGRESSIVE”
setting
ENTER
ENTER
ENTER
ENTER
TV ASPECT:
• Select “4:3 LETTER BOX”, so that
black bars mayy appear on the top
and bottom of the screen.
• Select “4:3 PAN & SCAN” for a full
height picture with both sides
adjusted.
• Select “16:9 WIDE” if a wide-screen
TV is connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you
y select “AUTO”, it automatically
selects the best resolution setting
(“FRAME” or “FIELD”) based on the data
characteristics of the pictures. (default)
• If you
y select “FIELD”, the picture in
the still mode will be stabilized.
• If yyou select “FRAME”, the picture in
the still mode will be highly defined.
• An individual picture on TV screen
is called a “frame”, which consists of
two separate images called as “field”.
• Some pictures mayy be blurred if
yyou select “AUTO” in the still mode
due to their date characteristics.
C
PROGRESSIVE: (Default: OFF)
See note on the right.
Select
“ON”.
DISPLAY_PROGRESSIVE
TV ASPECT
STILL MODE
PROGRESSIVE
SETUP
OFF
ON
OFF
ON
ENTER
Note:
PROGRESSIVE:
• You can set
“PROGRESSIVE” to
“OFF” in “DISPLAY”
menu or press and
hold [PLAY B] on the
front of the unit for
more than 5 seconds
during playback, so
that the P- SCAN
indicator on the front
panel turns off.
• When “PROGRESSIVE”
is “ON”, video signals
from the unit’s VIDEO
OUT and S-VIDEO OUT
jacks will be distorted
or not be output at all.
ENTER
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
If there is no picture or
you do not press any
buttons for 15 seconds,
“PROGRESSIVE” will
switch to “OFF” and it
will exit the “SETUP”
menu.
ENTER
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Act i vat e Pr ogr essi ve?
SELECT: K / L
NO
YES
SET:ENTER
ENTER
Select “Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
ENTER
NO
YES
SELECT: K / L
SET:ENTER
DVD FUNCTIONS
Note:
AUDIO Setting
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on page 14.
3
Select the desired item.
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
Select the
AUDIO_DRC
desired
ENTER
ON
DRC
ON
setting.
OFF
DOWN SAMPLING
OFF
ENTER
DOLBY DIGITAL
ENTER
AUDIO menu
AUDIO_DRC
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
ENTER
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
Select the
desired
AUDIO_DOWN SAMPLING
DRC
ON
ON
setting.
DOWN SAMPLING
OFF
OFF
ENTER
DOLBY DIGITAL
ENTER
ENTER
5
To exit the menu
SETUP
Note:
DRC:
• This function is
available only on
the discs which are
recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back
disc with copyright
protection, the sound
will be down sampled
at 48kHz, even if you
set to “OFF”.
DOLBY DIGITAL: (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital signals.
• PCM: convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL
Select the
DRC
BITSTREAM
BITSTREAM
desired
ENTER
DOWN SAMPLING
PCM
PCM
setting.
DOLBY DIGITAL
ENTER
– 15 –
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 15
ENTER
EN
2012/01/30 17:43:12
D
PARENTAL Setting
Parental control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental level allows you to set the rating levels of your DVD. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 2 on page 14.
3
Press [ENTER], and then
select “YES”.
ENTER
ENTER
4
Enter your desired
4-digit password.
ENTER
1
2
3
4
5
6
7
8
9
0
If the password has not
been set yet.
PASSWORD
ENTER
5
Select “LEVEL”.
ENTER
6
Select the desired
level, and press
[ENTER].
ENTER
ENTER
+10
NO
YES
Enter password
PASSWORD
LEVEL
CHANGE
----
PASSWORD
LEVEL
CHANGE
PARENTAL menu
8 [ADULT]
TIPS FOR LEVELS
DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC-17]: no one under 17 admitted
• 6 [R]:
restricted; under 17 requires accompanying
parent or adult guardian
• 5 [PGR]:
parental guidance recommended
• 4 [PG13]:
unsuitable for children under 13
• 3 [PG]:
parental guidance suggested
• 2 [G]:
general audience
• 1 [KID SAFE]: suitable for children
PARENTAL_PASSWORD
_
PASSWORD
Enter a new
password again.
NO
YES
If the password has been set
already, enter the current
4-digit password.
PASSWORD
• 8 [ADULT]:
NO
YES
Re-enter password
----
PARENTAL menu
PARENTAL_CHANGE
DVD FUNCTIONS
PASSWORD
LEVEL
CHANGE
Enter password
Note:
----
7
• For DVD, the resume information will be
cleared if you change the parental level when
the resume information is on.
If you do not need parental lock, choose “NO”.
Press [ENTER].
To exit the menu
SETUP
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 2 on page 14.
6
Select “CHANGE” at step 5
above.
ENTER
7
PARENTAL menu
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
+10
0
+10
PASSWORD
LEVEL
CHANGE
----
Re-enter password
ENTER
9
To exit the menu
SETUP
Note:
PASSWORD
LEVEL
CHANGE
Enter new password
E
Enter your new 4-digit
password again.
1
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
8
Enter your desired
4-digit password.
----
• Record the password in case
you forget it.
• If you forget the password,
press [4], [7], [3], [7] at step 3
above, then enter your new
password. Password will be
cleared and parental levels
will be set to “8 [ADULT]”.
OTHERS Setting
You can change the other function. Follow steps 1 to 2 on page 14.
3
Select “ANGLE ICON”.
OTHERS menu
OTHERS_ANGLE
_
ICON
ANGLE ICON
ON
4
5
ANGLE ICON: (Default: ON)
Set to “ON” to display when
multiple camera angles are available
during DVD playback.
ANGLE ICON
ON
ON
OFF
Select the
desired
setting.
To exit the menu
SETUP
ENTER
ENTER
ENTER
EN
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 16
– 16 –
2012/01/30 17:43:14
F
1
Reset to the Default Setting (Except for PARENTAL Setting)
2
Press [SETUP].
3
Select “INITIALIZE”.
SETUP
ENTER
STOP
Select the desired PLAYER
MENU Language, using
[the Number buttons].
ENTER
<SETUP MENU>
Press
twice.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
INITIALIZE_INITIALIZE
INITIALIZE
Note:
• When you do not
wish to initialize,
press [SETUP] to
exit the menu at
step 2.
SELECT MENU LANGUAGE
1 ENGLISH
YES
2 FRENCH
3 SPANISH
INFORMATION
Troubleshootingg Guide
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
Problem
Corrective action
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
No sound or picture
–Check the video connection.
–Check the audio/video cable connections to the TV. (Refer to page 6.)
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–Connect the unit directly to the TV.
Distorted picture
–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and
you are using the component video connections between the unit and the TV. Disable progressive
scan for all other connections. (Refer to page 6.)
Completely distorted picture or
–Connect this unit directly to the TV.
black/white picture with DVD
–Make sure the disc is compatible with the unit.
–Adjust the volume.
No sound or distorted sound
–Check that the speakers are connected correctly.
–Check the digital connections.
No audio at digital output
–Check if the audio format of the selected audio language matches your receiver capabilities.
No DTS audio is output.
–This unit does not support DTS audio. This is not a malfunction.
Picture freezes momentarily during playback. –Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Ensure the disc is inserted in correct direction.
–Check if the disc is defective by trying another disc.
Disc cannot be played back.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays back on this unit.
–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No return to start-up screen when disc is removed. –Reset the unit by switching off the unit, then on again.
–Aim the remote control directly at the sensor on the front panel.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
The unit does not respond to
–Re-insert the batteries with their polarities (+/– signs) as indicated.
the remote control.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the volume. If you hear
some signal sound from the radio by pressing buttons on the remote control, the remote control is working.
–Press and hold any button on remote control toward a digital camera. The remote control is working if
you confirm infrared light through the digital camera.
Buttons do not work or the unit stops responding. –To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit does not respond to some
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
operating commands during playback.
The unit cannot read CD / DVD.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
–The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple
Angle does not switch.
angles are only recorded for specific scenes.
Playback does not start when the title is selected. –Check the “PARENTAL” setting.
The password for rating level has been forgotten. –Enter the default password “4737”, then your forgotten password will be cleared.
INFORMATION
No power
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for
more details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
Specifications
p
Output signal format:
NTSC color
Power source:
120 V AC +/- 10 %, 60 Hz +/- 0.5 %
Power consumption:
7 W (standby : 0.9 W)
Operating temperature:
41°F (5 °C) to 104 °F (40 °C)
Dimensions:
W : 8.3 inches
H : 2.0 inches
D : 9.7 inches
(210 mm)
(50 mm)
(245 mm)
– 17 –
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 17
Weight:
Approx 1.80 lbs.
(0.80 kg)
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between languages,
the default language will be English.
EN
2012/01/30 17:43:15
Español
p
1
4
Conexiones
Si su televisor tiene entradas de
AUDIO / VIDEO vea la sección
“Connection to a TV” en la página 6 en el
manual de manejo. En caso contrario, vea
la sección “Connecting to RF Modulator
(Not Supplied)” en la página del frente en
el manual de manejo.
Reproducción
Antes.
¡Encienda el televisor, amplificador y otros equipos conectados
a esta unidad. Asegúrese que el
televisor y el
sintonizador
1
de audio (no
provisto) están
en el canal correcto.
STANDBY-ON
1
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
1
AUDIO
2
REPEAT
CLEAR
A-B
PAUSE
0
3
2
3
5
3
9
+10
SKIP
Ponga un disco
con la etiqueta
hacia arriba.
4
Para p
parar la
reproducción
OPEN/CLOSE
Para empezar
p
la
reproducción
SLOW
PLAY
REV
FWD
STOP
1
STANDBY-ON
2
SUBTITLE
ANGLE
Instalación de las pilas en el
control remoto
Para abrir o cerrar
la bandeja del
disco
4
STOP
PLAY
Control remoto
Disco
Botón
(Orden alfabético)
* Pilas no provistas.
3
1
2
3
4
5
6
7
8
9
0
+10
Para cambiar el idioma en la
pantalla
• Para mover el cursor y determinar la posición. • Para mover el cursor y determinar la posición.
A-B
“LANGUAGE”.
SETUP
• Para repetir entre su punto A y B
seleccionado.
ANGLE
• Para seleccionar los ángulos de la cámara en
un disco.
AUDIO
• Para seleccionar idiomas de audio en un
disco.
STOP
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY
REV
• Para repetir entre su punto A y B
seleccionado.
-----• Para seleccionar “ESTÉREO”, “L-ch” o “R-ch”.
(CD)
• Para eliminar el Nº de estado en la entrada de • Para eliminar el Nº de estado en la entrada de
programa.
programa.
• Para borrar los números mal entrados.
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.
• Para borrar el punto para la repetición A-B.
CLEAR
LANGUAGE
ENTER
• Para seleccionar directamente la canción.
(CD)
• Para seleccionar directamente el grupo /
canción. (MP3)
ENTER
1 Confirme que ha seleccionado
STANDBY-ON
título.
FWD
MENU
2 Seleccione “PLAYER MENU”.
MODE
• Para mostrar el modo de disco actual.
• Para mostrar el modo de disco actual.
• Para buscar en avance/retroceso por un disco.
• Para empezar la reproducción en avance
lento durante el modo de pausa.
• Para buscar en avance/retroceso por un
disco.
• Para llamar el menú en un disco.
------
• Para disponer el orden de reproducción o la
reproducción aleatoria.
• Para activar/desactivar el nivel del negro.
• Para disponer el orden de reproducción o la
reproducción aleatoria.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para hacer una pausa en la reproducción.
• Para avanzar la reproducción un cuadro cada vez.
• Para hacer una pausa en la reproducción del
disco.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para reproducir repetidamente una canción o
disco. (CD)
• Para reproducir repetidamente una cansión,
grupo o disco. (MP3)
ENTER
LANGUAGE_PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
OPEN/CLOSE
PAUSE
Español
ENTER
PLAY
3 Seleccione el idioma deseado para las
REPEAT
• Para reproducir repetidamente un capítulo o
título.
RETURN
• Para volver a la operación anterior en el
menú.
• Para volver a la operación anterior en el
menú.
• Para buscar un capítulo, título o tiempo.
• Para buscar una canción.
• Para buscar el tiempo. (CD)
• Para buscar los grupos. (MP3)
• Para llamar el menú de ajustes de DVD.
• Para llamar el menú de ajustes de DVD.
• Para saltar capítulos o titulo.
• Para saltar canciones. (CD)
• Para saltar los grupos o canciones. (MP3)
• Para encender o para pasar la unidad al modo de
• Para encender o para pasar la unidad al modo de
indicaciones en la pantalla.
LANGUAGE_PLAYER MENU
ENTER
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
SEARCH
MODE
SETUP
ENTER
SKIP
STANDBY-ON
4 Para salir del menú
espera. (Para apagar completamente la unidad,
debe desconectar el cable de alimentacion de CA.)
SETUP
STOP
SUBTITLE
TOP MENU
ZOOM
ES
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 18
• Para parar la reproducción.
espera. (Para apagar completamente la unidad,
debe desconectar el cable de alimentacion de CA.)
• Para parar la reproducción.
• Para seleccionar subtítulos en un disco.
------
• Para llamar el menú inicial en un disco.
------
• Para ampliar la imagen de vídeo en DVD.
(2x / 3x / 4x / 1/2x)
------
– 18 –
2012/01/30 17:43:16
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the
USA in the event of defect in materials or workmanship as
follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded
from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge
for a period of ninety (90) days from the date of
original retail purchase.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) days labor and parts
limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL
RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED
TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER
THIS WARRANTY.
This warranty shall not be extended to any other person or
transferee.
This warranty is void and of no effect if any serial numbers
on the product are altered, replaced, defaced, missing or if
service was attempted by an unauthorized service center.
This limited warranty does not apply to any product not
purchased and used in the United States.
This warranty only covers failures due to defects in material
or workmanship which occur during normal use. It does not
cover damage which occurs in shipment, or failures which
are caused by repairs, alterations or products not supplied
by FUNAI CORP., or damage, which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty
installation, improper maintenance, commercial use such as
hotel, rental or office use of this product, or damage which
results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,
ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR
FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR
OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER
LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE
UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIEDIN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF
THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE
HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE
REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
To obtain warranty service, you must take the product, or
deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of
protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by
unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or
for general service inquiries, please contact us at:
FUNAI SERVICE CORPORATION
Tel :1-800-605-8610
www.magnavox.com/support
2200 Spiegel Drive, Groveport, OH 43125
E6K0DUD/E6K0DUH
★★★★★
E6K0DUD_E6K0DUH_MDV2300F7_EN_v1.indd 19
2012/01/30 17:43:17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement