Cisco AP775A - Nexus Converged Network Switch 5010 QuickSpecs

Cisco AP775A - Nexus Converged Network Switch 5010 QuickSpecs
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Overview
Hewlett Packard's MSA P2000 Family of storage arrays features P2000 G3 arrays with the latest 8 Gb Fibre Channel, 6 Gb SAS, 10GbE
iSCSI connected models, and an iSCSI model with four 1 Gb iSCSI ports per controller. The arrays are designed for entry-level customers
and feature the latest in functionality and host-connect technology while offering excellent price/performance. They are ideal for
companies with small budgets or limited IT expertise, and also larger companies with departmental or remote requirements. Each
solution is designed to be easy to deploy, to be secure, along with low management costs, while driving rapid return on investment
through efficient storage consolidation.
The MSA P2000 G3 arrays are 2U storage area network (SAN) or direct connect solutions (OS and protocol dependent) offering a choice
of five controllers - two FC, one SAS, one 10GbE iSCSI and the newest model features a four port 1 Gb iSCSI. The first Fibre Channel
controller is a high-performance, 8 Gb dual port model. The second offering is a unique dual-purpose Combo controller with two 8 Gb
Fibre Channel ports with the addition of two 1GbE iSCSI ports. The third controller choice is 6Gb SAS with four ports per controller.
There is also the addition of a two port 10 Gb iSCSI, while the latest controller introduction features four 1 Gb iSCSI ports per controller.
Whatever the situation calls for, the P2000 G3 line-up has the right solution.
The dual-protocol MSA P2000 G3 MSA FC/iSCSI Combo Controller gives exceptional flexibility. The 8 Gb FC ports support a full FC SAN
while the two 1GbE iSCSI ports can serve two purposes. With this combination you can economically share the array storage resource
with a smaller department accessing it over iSCSI or enable the new optional Remote Snap functionality over iSCSI protocol (also
available over FC).
The MSA P2000 G3 SAS is the follow-on product to the MSA2000sa G2, adding the latest 6 Gb SAS technology to the four host ports per
controller. The P2000 G3 SAS array is designed for directly attaching up to four dual-path or eight single path rack servers. SAS array
support for BladeSystems utilizes the HP 6 Gb SAS BL Switch.
The MSA P2000 G3 10GbE iSCSI brings the very latest in high-performance host connection with technology generally found only in
higher priced arrays. The bandwidth it provides in conjunction with server consolidation is highly advantageous in shared storage
configurations. Array connection to 10GbE switches that are in turn connected to 1GbE NICs is commonplace. Directly attached server
support requires the server units to have 10GbE NICs.
Rounding out the controller choices is the MSA P2000 G3 iSCSI controller featuring four 1Gb iSCSI Ethernet ports, double the number of
the G2 model. This allows an array that keeps the price of the components, particularly the interconnects, low while markedly
increasing the performance capabilities.
All MSA P2000 G3 models can be equipped with single or dual controllers, feature the same scalability, and offer 6 Gb SAS back-end
transmission speed to drives and JBODs. Significant data protection advances are delivered by the all P2000 G3 arrays. All G3 units
come STANDARD with sixty-four snapshot capability at no extra cost and there is an option for the G3 series of five hundred and twelve
snapshots. Volume Copy (clone) also comes standard. In a further move to protect the user's data, optional Remote Snap (replication)
capability is offered on the FC, FC/iSCSI, and both iSCSI versions.
All MSA P2000 G3 models support hot plug replacement of redundant controllers, fans, power supplies, and I/O modules. Hot add of
expansion enclosures is also supported.
The controller-less MSA P2000 chassis is offered in two models - one comes standard with twelve Large Form Factor (LFF) 3.5-inch
drive bays, the other can accommodate twenty-four Small Form Factor (SFF) 2.5-inch drives. Both are able to simultaneously support
enterprise-class SAS drives, SAS Midline, and archival-class SATA Midline drives. Either chassis can have one or two matching P2000 G3
controllers (same protocol) and are available with AC or DC power Supplies.
The HP modular approach to entry level SAN solutions enables incremental customer purchases, allowing the array to grow as needs
grow, thus allowing a maximum return on investment. Choose a single controller unit for low initial cost with the ability to upgrade
later; or decide on a model with dual controllers for the most demanding entry-level situations. There are no unexpected additional
charges, licenses or fees as you add enclosures or hosts and users.
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 1
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Overview
Capacity can easily be added as the need develops by attaching additional drive enclosures. Maximum capacity ranges with LFF drives
up to 57.6 TB SAS, 384 TB SAS Midline or 192 TB SATA Midline with the addition of the maximum number of drive enclosures.
Configurations utilizing the SFF drive chassis and the maximum number of drive enclosures can grow to 134 TB of SAS, 149 TB of SAS
Midline or 74.5 TB SATA Midline with a total of 96 LFF or 149 SFF drives. The P2000 G3 Arrays do not support SSDs.
What's New in the P2000 G3 array family
Adding support for the new HP P2000 4TB Large Form Factor SAS MDL HDD
HP MSA 4 TB 6G SAS 7.2K 3.5 in MDL HDD
Microsoft Windows Server 2012 support
Support with HP StoreEasy 3830 Gateway Storage or StoreEasy 3830 Gateway Storage Blades
HP P2000 G3 SFF Modular Smart Array
HP P2000 G3 LFF Modular Smart Array
P2000 G3 FC Controllers, 2 installed
1. Power supplies
4. Reserved for future use
2. 8 Gb Fibre Channel ports
5. Management Ethernet port
3. CLI port (mini-USB)
6. Expansion port
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 2
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Overview
P2000 G3 FC/iSCSI Combo Controllers, 2 installed
1. Power supplies
5. Reserved for future use
2. 8 Gb Fibre Channel ports
6. Management Ethernet port
3. 1GbE iSCSI ports
7. Expansion port
4. CLI port (mini-USB)
P2000 G3 SAS controllers, 2 installed
1. Power supplies
4. Management Ethernet port
2. 6Gb SAS ports (four per
5. Expansion port
controller)
3. CLI port (mini-USB)
P2000 G3 10GbE iSCSI controllers, 2 installed
1. Power supplies
4. Management Ethernet port
2. 10GbE iSCSI ports
5. Expansion port
3. CLI port (mini-USB)
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 3
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Overview
P2000 G3 iSCSI dual controller
1. Power supplies
4. CLI port (mini-USB)
2. 1 GbE iSCSI ports (4)
5. Management Ethernet port
3. 1 GbE iSCSI ports (4)
6. Expansion port
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 4
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Models
P2000 G3
Modular Smart Array
P2000 G3 Controllers
P2000 G3 Fibre Channel Controllers
HP P2000 G3 MSA Fibre Channel Controller
NOTE: two 8Gb FC ports per controller
AP836B
HP P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller
NOTE: two 8Gb FC ports and two 1GbE iSCSI ports per controller
AP837B
P2000 G3 SAS Controller
HP P2000 G3 SAS MSA Array System Controller
NOTE: four 6Gb SAS ports per controller
AW592B
P2000 G3 10GbE iSCSI controller
HP P2000 G3 10GbE iSCSI MSA Array System Controller
NOTE: two 10GbE iSCSI ports per controller
AW595B
P2000 G3 iSCSI controller (1Gb Ethernet)
HP P2000 G3 iSCSI MSA Array System Controller
NOTE: four 1Gb iSCSI ports per controller
BK829B
P2000 Chassis
P2000 Controller-less Chassis (AC-powered)
HP P2000 LFF Modular Smart Array Chassis
NOTE: Will accept one or two controllers or Disk Enclosure I/O modules
AP838B
HP P2000 SFF Modular Smart Array Chassis
NOTE: Will accept one or two controllers, not I/O modules
AP839B
P2000 G3 Configured Array Systems
Configured Units, 8 Gb Fibre Channel Systems
HP P2000 G3 MSA FC Dual Controller LFF Modular Smart Array System
HP P2000 G3 MSA FC Dual Controller SFF Modular Smart Array System
HP P2000 G3 MSA FC/iSCSI Dual Combo Controller LFF Array
HP P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Array
Configured Units, 6 Gb SAS Systems
AP845B
AP846B
AW567B
AW568B
HP P2000 G3 SAS MSA Dual Controller LFF Array System
HP P2000 G3 SAS MSA Dual Controller SFF Array System
Configured Units, 10GbE iSCSI Systems
AW593B
AW594B
HP P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System
Configured Units, 1Gb iSCSI Systems
AW596B
AW597B
HP P2000 G3 iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 iSCSI MSA Dual Controller SFF Array System
P2000 G3 FC SAN Starter Kits
BK830B
BK831B
HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit
HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit
(includes dual 8 Gb controllers, 24-drive bay SFF chassis, two 16-port 8 Gb switches, six
8 Gb single-port HBAs, SFPs and cables)
AP847B
AP848B
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 5
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Models
Disk Enclosures
HP P2000 Dual I/O LFF Drive Enclosure
HP P2000 LFF Drive Enclosure I/O Module
HP D2700 Disk Enclosure
Controller-less Chassis (DC-powered)
AP843B
AP844B
AJ941A
HP P2000 DC-power LFF Chassis
(can add one or two P2000 G3 controllers or P2000 JBOD I/O modules)
HP P2000 DC-power SFF Chassis
AP840B
AP841B
P2000 G3 Array Bundles
In some areas HP is offering P2000 G3 Array bundles with ProLiant SFF SAS drives. These bundles can simplify the process of ordering.
HP offers these bundles with different type of P2000 G3 Array controllers for different storage capacity needs.
NOTE: These bundles are not offered worldwide so please check the availability for your region
Protocol
Raw Capacity
Regions
Availability
Bundle Description
SKUs
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
HP P2000 G3 FC DC w/24 146GB SAS
15K SFF HDD 3.5TB Bundle
HP P2000 G3 FC DC w/24 300GB SAS
10K SFF HDD 7.2TB Bundle
HP P2000 G3 FC DC w/24 600GB SAS
10K SFF HDD 14.4TB Bundle
HP P2000 G3 FC 24x900GB SAS SFF
Bundle
HP P2000 G3 FC 24x1TB SAS SFF
Bundle
HP P2000 G3 FC DC w/24 300GB SAS
15K SFF HDD 7.2TB Bundle
BV901B
21.6 TB
AMS
APJ
QR518B
24 TB
AMS
APJ
HP P2000 G3 FC/iSCSI MSA DC w/24
900GB SAS 10K SFF HDD 21.6TB
Bundle
HP P2000 G3 FC/iSCSI MSA DC w/24
1TB SAS 7.2K SFF MDL HDD 24TB
Bundle
7.2 TB
AMS
APJ
AMS
APJ
AMS
APJ
HP P2000 SAS DC w/24 300GB SAS
10K SFF HDD 7.2TB Bundle
HP P2000 SAS DC w/24 600GB SAS
10K SFF HDD 14.4TB Bundle
HP P2000 G3 SAS MSA DC w/24 900GB
SAS 10K SFF HDD 21.6TB Bundle
BV908B
Fully Populated Bundles:
FC Bundles
3.5 TB
7.2 TB
14.4 TB
21.6 TB
24 TB
7.2 TB AMS
FC/iSCSI Combo
Bundles
SAS Bundles
14.4 TB
21.6 TB
DA - 13551 EMEA — Version 30 — May 13, 2013
BV902B
BV903B
QR517B
QR521B
QW945B
QR522B
BV909B
QR519B
Page 6
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Models
1G iSCSI
Bundles
24 TB
AMS
APJ
HP P2000 G3 SAS MSA DC w/24 1TB
SAS 7.2K SFF MDL HDD 24TB Bundle
QR523A
7.2 TB
AMS
APJ
AMS
APJ
HP P2000 G3 iSCSI DC w/24 300GB
SAS 10K SFF HDD 7.2TB Bundle
HP P2000 G3 iSCSI MSA DC w/24
900GB SAS 10K SFF HDD 21.6TB
Bundle
HP P2000 G3 iSCSI MSA DC w/24 1TB
SAS 7.2K SFF MDL HDD 24TB Bundle
BV911B
HP P2000 G3 FC DC w/12 300GB SAS
10K SFF HDD 3.6TB Bundle
HP P2000 G3 FC DC w/12 600GB SAS
10K SFF HDD 7.2TB Bundle
BV913B
HP P2000 G3 FC MSA DC w/12 900GB
SAS 10K SFF HDD 10.8TB Bundle
HP P2000 G3 FC MSA DC w/12 1TB SAS
7.2K SFF MDL HDD 12TB Bundle
HP P2000 G3 FC DC w/12 300GB SAS
15K SFF HDD 3.6TB Bundle
QR525B
21.6 TB
24 TB
AMS
APJ
QR520B
QR524B
Half Populated Bundles:
FC Bundles
3.6 TB
7.2 TB
10.8 TB
12 TB
3.6 TB
FC/iSCSI Combo
Bundles
SAS Bundles
10.8 TB
AMS
APJ
12 TB
AMS
APJ
3.6 TB
7.2 TB
10.8 TB
12 TB
3.6 TB
1G iSCSI G3
Bundles
AMS
APJ
AMS
APJ
EMEA
AMS
APJ
AMS
APJ
AMS
APJ
3.6 TB
BV914B
QR529B
QW949B
HP P2000 G3 FC/iSCSI MSA DC w/12
900GB SAS 10K SFF HDD 10.8TB
Bundle
HP P2000 G3 FC/iSCSI MSA DC w/12
1TB SAS 7.2K SFF MDL HDD 12TB
Bundle
QR526B
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
HP P2000 G3 SAS DC w/12 300GB SAS
10K SFF HDD 3.6TB Bundle
HP P2000 G3 SAS DC w/12 600GB SAS
10K SFF HDD 7.2TB Bundle
HP P2000 G3 SAS MSA DC w/12 900GB
SAS 10K SFF HDD 10.8TB Bundle
HP P2000 G3 SAS MSA DC w/12 1TB
SAS 7.2K SFF MDL HDD 12TB Bundle
HP P2000 G3 SAS DC w/12 300GB SAS
15K SFF HDD 3.6TB Bundle
BV917B
AMS
APJ
HP P2000 G3 iSCSI DC w/12 300GB
SAS 10K SFF HDD 3.6TB Bundle
DA - 13551 EMEA — Version 30 — May 13, 2013
QR530B
BV918B
QR527B
QR531B
QW951B
BV919B
Page 7
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Models
7.2 TB
10.8 TB
12 TB
3.6 TB
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
EMEA
HP P2000 G3 iSCSI DC w/12 600GB
SAS 10K SFF HDD 7.2TB Bundle
HP P2000 G3 iSCSI MSA DC w/12
900GB SAS 10K SFF HDD 10.8TB
Bundle
HP P2000 G3 iSCSI MSA DC w/12 1TB
SAS 7.2K SFF MDL HDD 12TB Bundle
HP P2000 G3 iSCSI DC w/12 300GB
SAS 15K SFF HDD 3.6TB Bundle
DA - 13551 EMEA — Version 30 — May 13, 2013
BV920B
QR528B
QR532B
QW952B
Page 8
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Features
Key Features
The HP P2000 G3 Modular Smart Array family encompasses five controllers, each featuring different protocols or combination of
protocols to match the exact needs of the user.
P2000 G3 FC/iSCSI Combo MSA controller: this unique controller offers both 8 Gb Fibre Channel and 1 GbE iSCSI functionalities
built into a single array controller. This allows customers to enable storage needing high performance thru the FC ports while
leveraging their SAN investment by sharing the array resources with smaller departments through low-cost iSCSI. It also
enables optional Remote Snap (replication) for data protection.
P2000 G3 FC MSA controller: Dual 8 Gb Fibre Channel host ports per controller give high performance with a mature topology
and is compatible with the largest installed base of SAN users.
P2000 G3 10GbE iSCSI MSA controller: HP was the first of the major modular array manufacturers that brought a high
performance dual-ported 10GbE iSCSI solution to the entry level segment. Ideal for those who want to utilize cost-effective
Ethernet as their infrastructure without sacrificing access time to their data. Now supports Remote Snap (replication).
P2000 G3 SAS MSA controller: the P2000 G3 SAS model gives fast 6 Gb transmission rates with low cost SAS connections. Four
host ports per controller support a highly efficient direct connect configuration.
P2000 G3 iSCSI MSA controller offers four 1 Gb iSCSI ports utilizes the popular Ethernet infrastructure with its low cost and ease
of management, while the additional ports assure increased performance over the previous generation. Now supports Remote
Snap (replication).
All P2000 G3 models offer a common set of valuable features:
Ease of management featuring browser-based out-of-band access. This allows a department or small company to effectively
handle growing storage requirements, with the aid of an intuitive GUI to administer the unit with a minimum of complexity. Ideal
for local or remote installations.
All G3 models come standard with 64 controller-based snapshots and clone capability. The G3 arrays also support an optional
512 snaps.
Choose either a low-cost single controller array or start with a configured dual controller array model to fit the budget, high
availability, and performance needs.
All models feature a wide variety of drives: enterprise-class SAS, SAS Midline, and archival-class SATA Midline in either P2000
LFF 3.5-inch or HP ProLiant SFF 2.5-inch drives.
P2000 G3 models can have a maximum number of P2000 LFF drive enclosures (7), a maximum number of D2700 SFF enclosures
(5), or mix both sizes. The array can grow incrementally from a few drives to 134 TB SAS, 384 TB of SAS MDL or 192 TB SATA
MDL.
2 GB transportable read/write cache per controller. Battery-free cache backup with super capacitors and compact flash
Vdisks can be spanned across multiple enclosures
RAID levels 0, 1, 3, 5, 6, 10, 50
Maximums vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 0, 3, 5, 6, and 10; max of 32 drives
for RAID level 50
512 LUNs with LUN sizes greater than 40TB depending on the RAID configuration chosen. The maximum LUN size is 64TB
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)
Upgradable by design. Owners of an original MSA2000 G1 or G2 array are able to do data-in-place controller upgrades to the
P2000 G3 FC, Combo FC/iSCSI, 1 Gb or 10GbE iSCSI, or P2000 G3 SAS. Cross protocol upgrades are also supported between the
protocols. This unique ability protects the earlier investments in chassis, drives, and JBODs
Follow us on twitter and be a part of the conversation, and get the latest P2000 G3/MSA related news and information at:
http://www.twitter.com/MSAstorage
HP P2000 G3 FC MSA SAN Starter Kits
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 9
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Features
The new P2000 G3 FC MSA SAN Starter kits are offered to simplify ordering and implementation of your SAN. HP includes all the
necessary hardware components to build your own SAN solution in one package, just add the drives of your choice. These kits are
offered at very affordable prices which reflect a savings over purchasing each SAN component separately.
Virtualization SAN Starter HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit. The HP P2000 G3 FC
MSA Dual Controller Virtualization SAN Starter Kit addresses the growing need for
Kit
server and storage administrators to deliver end-to-end storage, virtualization, and
management capabilities across their network infrastructure. The hardware bundle
consists of six Host Bus Adapters (HBAs), two FC switches, a P2000 G3 FC MSA Dual
Controller Array (SFF Chassis) as well as two licenses per switch enabling Server
Application Optimization (SAO) and Adaptive Networking (AN). SAO is an adapter
technology that offers Quality of Service (QoS) capabilities that can be used in
conjunction with fabric wide QoS and to enable a high performing, virtualized
infrastructure. With SAO deployed, administrators can protect a VM and its application
by assigning its IO flow to a specific priority level. The QoS priorities are enforced at the
hardware level, thereby providing adequate bandwidth during periods of high
congestion. Applications such as email and databases achieve better performance when
deployed in specific SAO and MSA configurations.
Small Business SAN
HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit
Starter Kit
The HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit is a unique
end-to-end 8 Gbps SAN Solution, just add disks and power. This kit includes one 8 Gbps
P2000 G3 FC MSA Dual Controller Array (LFF Chassis), four 8 Gbps FC HBAs, two HP
SN6000 Stackable 8 Gbps 8-port FC switches and HP unique Simple SAN Connection
Manager (SSCM) SAN management software, cables, rails and optics. SSCM is the only
SAN management software that can manage the FC switch, HBA and provision HP
storage from a single pane of glass.
Application Solutions
Learn more
AP848B
AP847B
The HP P2000 SAN is the ideal solution for customers running Oracle, Microsoft, SAP environments and
those customers who are deploying virtual server technologies like VMware, Hyper-V, and Oracle Virtual
Machine. The HP P2000 SAN delivers enterprise functionality that enhances virtual environments,
simplifies management, and reduces costs. Easy to deploy, scale and maintain, HP P2000 SANs ensure
that crucial business data remains available.
HP has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor
technology through extensive testing with the HP P2000 SAN, HP servers, and management software;
high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and
SAP application platforms. As a result, our customers can expect a wide range of operational and business
benefits where they can:
Deploy IT assets across multiple locations.
Incrementally grow storage without interruption.
Enable high availability and disaster recovery capabilities for critical applications.
Deploy a remote disaster recovery site.
To learn more about specific HP Storage Solutions that are built with Oracle, Microsoft, SAP and
Virtualization environments in mind, visit the solution sites supporting each of these applications.
HP Storage for Oracle hyperlink to: http://www.hp.com/storage/oracle
HP Storage for Microsoft hyperlink to: http://www.hp.com/storage/microsoft
HP Storage for SAP hyperlink to: http://www.hp.com/storage/sap
HP Storage for VMware hyperlink to: http://www.hp.com/go/vmware/storage
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 10
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
P2000 G3 FC
Capacity
LFF: 7.2 TB SAS
Minimum / with maximum or 36 TB SAS MDL or 24
additional drive enclosures
TB SATA MDL
w/ 7 LFF enclosures:
57.6 TB SAS,
384 TB SAS MDL or 192
TB SATA
SFF: 21.6 TB SAS
or 24 TB SS MDL or 12 TB
SATA MDL
w/ 5 D2700 JBODs:
134 TB SAS
or 149 TB SAS MDL or
74.5 TB SATA MDL
Controller Cache
2 GB per controller
P2000 G3 SAS
P2000 G3 10GbE iSCSI
P2000 G3 iSCSI (1GbE)
LFF: 7.2 TB SAS
or 36 TB SAS MDL or 24
TB SATA MDL
w/ 7 LFF enclosures:
57.6 TB SAS,
384 TB SAS MDL or 192
SATA
SFF: 21.6 TB SAS
or 24 TB SAS MDL or 12
TB SATA MDL
w/ 5 D2700 JBODs:
134 TB SAS
or 149 TB SAS MDL or
74.5 TB SATA MDL
2 GB per controller
LFF: 7.2 TB SAS
or 36 TB SAS MDL or 24
TB SATA MDL
w/ 7 LFF enclosures:
57.6 TB SAS,
384 TB SAS MDL or 192
TB SATA
SFF: 21.6 TB SAS
or 24 TB SAS MDL or 12
TB SATA MDL
w/ 5 D2700 JBODs:
134 TB SAS
or 149 TB SAS MDL or
74.5 TB SATA MDL
2 GB per controller
LFF: 7.2 TB SAS
or 36 TB SAS MDL or 24
TBSATA MDL
w/ 7 LFF enclosures:
57.6 TB SAS,
384 TB SAS MDL or 192
TB SATA
SFF: 21.6 TB SAS
or 24 TB SAS MDL or 12
TB SATA MDL
w/ 5 D2700 JBODs:
134 TB SAS
or 149 TB SAS MDL or
74.5 TB SATA MDL
2 GB per controller
Total LUNs
512
512
512
512
maximum LUN size: 64TB maximum LUN size: 64TB maximum LUN size: 64TB maximum LUN size: 64TB
LUN sizes greater than
40TB depending on the
RAID configuration chosen
Host connect
Two 8 Gb
Four 6 Gb (x4)
Two 10 GbE iSCSI ports
Four 1 Gb
Fibre Channel ports or
SAS ports
per controller
iSCSI ports
P2000 & MSA2000 have 1
per controller
per controller
or 2 controllers, EVA has 2 Two 8Gb FC and two 1GbE
iSCSI ports
controllers standard
per controller
Maximum Drives
96 LFF/149 SFF
96 LFF/149 SFF
96 LFF/149 SFF
96 LFF/149 SFF
w/ expansion
Maximum host supported
64
64
64
64
w/ SAS switch: 32 single
(dual controller)
blade servers (2x c7000),
or 16 dual density blade
servers
Optional software:
Snapshot, 64 standard
Snapshot, 64 standard
Snapshot, 64 standard
Snapshot, 64 standard
(max
512)
(max
512)
(max
512)
(max 512)
Snapshot, clone,
Clone
(standard)
Clone
(standard)
Clone
(standard)
Clone
(standard)
Remote
Remote Snap
Remote Snap (optional)
Remote Snap (optional)
Snap (optional)
Use for Storage
Primary Storage
Primary Storage
Primary Storage
Primary Storage
with SAS drives.
with SAS drives.
with SAS drives.
with SAS drives.
Secondary with SATA
Secondary with SATA
Secondary with SATA
Secondary with SATA
NOTE: maximum available storage capacity depends on the RAID level being implemented
Product Technology
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 11
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
8Gb Fibre Channel
controller
Two host ports per FC controller shipped with SFPs. The P2000 G3 FC controller can run in either point-topoint or FCAL (loop). The default is FCAL which is used in Direct Connect, particularly with two controllers.
The PtP (fabric) mode is used with almost all switches.
Combo controller with
FC and iSCSI ports
This ingenious dual-protocol "combo" controller supports a full FC SAN through the 8Gb FC ports, while
designating the two 1 GbE iSCSI ports to enable remote replication over iSCSI protocol and perform as an
iSCSI target. This allows economical sharing of the storage resource (the P2000 G3 array) with one
department needing the performance afforded by the 8 Gb FC ports while simultaneously supporting
another department with lesser performance needs and a budget only allowing a 1GbE iSCSI network.
Four 4x host ports per 6Gb SAS controller.
6Gb SAS controller
10GbE iSCSI controller
Two 10GbE ports per G3 10GbE iSCSI controller. Ports are ready for the choice of SFP (none included)
Supports the ProCurve and ISS versions of the following 10GbE parts for use in the controllers:
HP 10Gb Cables
HP SFP+ 10GbE Copper Cable
HP ProCurve 10-GbE SFP+-SFP+ Direct Attach Cable
HP SFP+ Transceivers
1 Gb iSCSI controller
Modular Chassis
Drives available
HP BladeSystem 10Gb SR SFP+ and HP BladeSystem 10Gb LRM SFP+
HP ProCurve 10-GbE SFP+ SR Transceiver and HP ProCurve 10-GbE SFP+ LRM Transceiver
No SFP+ LR Transceiver support
Four 1 Gb Ethernet iSCSI ports per G3 iSCSI controller
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SAS and SATA.
Comes with space for one or two controllers, or P2000 3.5-inch disk Enclosure I/O modules (LFF chassis
only)
The P2000 G3 controllers support both the P2000 3.5-inch Large Form Factor (LFF) drives, and the HP
ProLiant 2.5-inch Small Form Factor (SFF) drives.
Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24x7 usage.
SAS Midline and SATA Midline are usually reserved for archival of data as they are both relatively
inexpensive and are available in very large capacities.
The HP entry-level family of arrays can accommodate both SAS and SATA drives within the same enclosure
making it ideal to have both business-critical, high activity files on SAS drives while using Snapshot, clone,
or Remote Snap capability to keep back-up or archival data on the less expensive drives.
For investment protection, the controllers will support single and dual port SAS & SATA drives in a legacy
single - or dual - domain MSA70. This support allows current owners of MSA70s to migrate their single port
drives (in their MSA70 only, not into the array head) to be attached to a P2000 G3 FC or SAS. They can only
cascade to another single I/O MSA70. This is not a data-in-place transition, and overall performance could
be impacted.
SAS drive performance can be approximately 30% greater than SATA performance on sequential host I/O.
SAS performance excels in sequential lower latency response time and random I/O per second transaction
performance due to higher rpm disk speeds yielding lower seek times. SAS drive random performance is
generally twice that of SATA drives.
NOTE: P2000 and MSA2 3.5-inch Large Form Factor (LFF) drives are for use only in the P2000 G3 or
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 12
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
MSA2000 models. The 2.5-inch Small Form Factor (SFF) drives are supported only with the P2000 G3 or the
MSA2300 G2 controllers and are common with and are the same part numbers as the ProLiant hot-plug 2.5inch drives.
Optional Disk enclosures Just as the user has a choice of chassis for the array head (LFF and SFF drive bays, AC or DC powered), so
also do they have a choice of expansion disk enclosures accommodating either drive size. Both the P2000
and the D2700 disk enclosures can be hot-added to an operating array.
(NOTE: these are not supported as part of a NEBS-certified configuration with the MSA Carrier Grade
Chassis. There is a certified JBOD listed in the Carrier-grade section)
P2000 3.5-inch drive enclosure. This 2U unit has twelve LFF (3.5-inch) drive bays and accepts for P2000
dual-ported SAS and SATA drives. The pre-configured HP P2000 Dual I/O LFF Drive Enclosure (AP843B) has
two I/O modules and supports both single and dual controller arrays. If a single I/O disk enclosure model is
desired, the appropriate chassis should be purchased along with a single I/O module (AP844B).
This 3.5-inch drive enclosure can be attached to either the P2000 G3 FC or SAS LFF or SFF array head.
Each configured model ships standard with two .5m mini-SAS to mini-SAS cables for cascading to
other P2000 drive enclosures
Up to seven P2000 3.5-inch enclosures can be attached to a P2000 G3 FC, FC/iSCSI Combo, or SAS
controller in the array head.
D2700 2.5-inch drive enclosure. This 2U storage enclosure (AJ941A) is designed to support twenty five
ProLiant 2.5-inch Universal form factor (SFF) 6Gb SAS or SATA hard drives. It ships standard with dual I/O
modules installed.
Scalability
Vdisks
LUNs
RAID 0, 1, 3, 5, 6, 10, 50
This 2.5-inch drive enclosure can be attached to a P2000 G3 controller (SFF or LFF) array head
The D2700 enclosure ships with a two .5m miniSAS to miniSAS cable.
Up to five D2700 may be attached to the P2000 G3 array head, given total support for 149 SFF drives.
The P2000 G3 FC, Combo FC/iSCSI, SAS, 1 Gb or 10GbE iSCSI controllers are designed to allow an installation
to begin with smaller capacity and be able to grow gradually as needed. The flexibility of SAS or SATA drive
technology, form factors, sizes, speeds, and costs per GB allows a system to easily fit in almost any budget.
Large Form Factor configurations can scale up to 7.2 TB SAS, 36TB SAS MDL or 24 TB SATA,
expandable to 57.6 TB SAS, 384 TB SAS MDL or 192 TB SATA with the addition of a maximum of seven
P2000 3.5-inch Drive Enclosures
Small Form Factor configurations can scale from 21.6 TB SAS, 24 TB SAS MDL or 12 TB SATA MDL.
With the addition of five D2700 JBODs, the P2000 G3 can support 134 TB SAS, 149 TB SAS MDL or
74.5 TB SATA MDL.
Users may configure a 24-drive P2000 G3 SFF array head with 12-drive LFF P2000 3.5-inch disk
enclosures. This is an excellent method for a configuration that supports fast SFF enterprise-class
SAS drives in the array head, combined with economical LFF drives staged for archival purposes, all in
the same array.
Qualification of larger capacity drives is ongoing.
Vdisks can span across multiple enclosures, where drives used in the Vdisk can be contained in different
enclosures. The maximum number of drives that can be used in RAID 1 Vdisk is 2; RAID 0, 3, 5, 6, and 10 is
16; and for RAID 50 Vdisk is 32.
The HP 2000 family of arrays supports 512 LUNs (total volumes in a dual controller system) and LUN sizes
up to 64 TB depending on the RAID configuration chosen. The array supports expansion and deletion of any
LUN.
In addition to the usual RAID levels, the P2000 G3 features several important additional levels. RAID 6 is the
highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous
write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is
mirroring and striping without parity. It is the most popular of the multiple RAID levels, allowing large arrays
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 13
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
Performance
with high performance in most cases and superior fault tolerance. RAID 50 combines the block striping and
parity of RAID 5 with the straight block striping of RAID 0, yielding higher performance than RAID 5 through
the addition of RAID 0, particularly during writes.
Performance numbers are a guideline as established by tests using RAW I/O in an Operating System
Agnostic test lab environment. 144 GB 15K SAS drives were used in a dual controller configuration of 12
vdisks consisting of twelve disks per vdisk, 1.6 TB volumes, and 3 volumes per host. 4 hosts directly
attached to the P2000 G3 array were used in this test configuration (results cannot be expected with a
single host). Results were achieved in Sequential Writes with 256K blocks; all random tests were based on
8K block sizes.
NOTE: Number and type of applications, drive type and number of drives, operating system used, and the
number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison.
Note: These numbers reflect a full array configuration with the maximum number of front-end ports, disks,
and controllers. The test results shown for the P2000 G3 are designed to give a conservative reference
point for comparisons.
2000 Array
Performance
P2000 G3 FC
P2000 G3
SAS
P2000 G3 10GbE
iSCSI
P2000 G3 1GbE iSCSI
Protocol (host
8 Gb
6 Gb
10Gb
1 Gb
connect)
Fibre Channel
SAS
Ethernet
Ethernet
2000 RAID 10 Performance Results
Sequential Reads
1,650
1,650
1,600
550
MB/s
Sequential Writes
850
850
800
525
MB/s
Random Mix IOPs
20,500
23,500
18,500
17,200
60/40 read/write
2000 RAID 5 Performance Results
Sequential Reads
1,650
1,650
1,600
550
MB/s
Sequential Writes
1,300
1,350
1,000
525
MB/s
Random Mix IOPs
14,000
16,000
12,500
9,400
60/40 read/write
2000 RAID 6 Performance Results
Sequential Reads
1,650
1,650
1,600
550
MB/s
Sequential Writes
1,300
1,100
1,000
525
MB/s
Random Mix IOPs
8,300
9,800
7,500
5,600
60/40 read/write
Refer to the paper titled "Upgrading the HP MSA2000 (G1 or G2) to the P2000 G3 MSA ", available in the
Resource Library at: www.hp.com/go/p2000.
DC-power chassis
HP is making the two models of controller-less chassis available with direct current (DC) power supplies.
They each have the two empty bays where users can insert one or two P2000 G3 controller(s). In addition,
the P2000 chassis with LFF drive bay can have P2000 3.5-inch I/O modules inserted to create a LFF DCpower JBOD.
The 500 watt power supply is designed to operate over the input range of -40VDC to -75VDC.
SKU
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 14
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
Configuration and
Management Tools
HP P2000 DC-power LFF twelve 3.5-in Drive Bays
AP840B
(supports up to 2 controllers or I/O modules)
HP P2000 DC-power SFF Chassis
AP841B
HP Storage Management Utility (SMU). Management access, out-of-band: WEB GUI, CLI. Interface Types:
USB, 10/100 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP, HTTP, Telnet
P2000 Software and
Documents
Support CD
All product documentation (CD can be used on ALL supported server Operating Systems.)
MSA Device Discovery Tool (Win and Linux) - reports P2000/MSA HW devices, and supported storage
software
Host Software Bundles (Win and Linux for both ProLiant x86, ProLiant x64 and Integrity IA64servers)
CD updated quarterly on HP.com with sustaining firmware updates
The P2000 G3 contains an embedded SMI-S provider for use by SMI-S client applications. The
embedded provider is designed to support P2000 configurations with up to 24 hard drives, and up to
250 mapping paths. A mapping path is defined as a P2000 volume presented through a P2000 target
port to a Host initiator.
Hot Plug Expansion and All P2000 G3 models support hot plug expansion and replacement of redundant controllers, enclosures,
fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of
Replacement Support
disk enclosures is also supported.
Snapshot and Clone
All G3 arrays come standard with 64 snaps, 512 snaps available. Controller based functionality. Offers
higher levels of data protection, enabling an almost instant recovery from data failure or corruption. Offers
alternative development testing of 'offline' production data and the ability to backup snapped/cloned data.
Overview
Server Compatibility
NOTE: depends on protocol
The P2000 G3 arrays come integrated with web browser and CLI based software for storage and RAID
management, setup, configuration, and troubleshooting. This reduces the cost of ownership by reducing
the training and technical expertise necessary to install and maintain your HP storage solution.
The SPOCK database provides interoperability information for thousands of components and millions of
component combinations. It is available to all users at http://www.hp.com/storage/spock.
Supports most HP ProLiant, BladeSystems and Integrity servers including
HP ProLiant DL, ML
HP c-Class Blade Servers
Integrity servers, IA64 (FC and FC/iSCSI support only)
Compatibility must be confirmed at: http://www.hp.com/storage/spock
Industry Standard servers
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server Catalog.
support
Refer to the Microsoft website: http://www.microsoft.com/windows/catalog/server/
HP Division recommends that the Third-Party Server Vendor is an active member of TSANet. Refer
to the TSANet website for details: www.tsanet.com
Non-HP servers will generally be supported if the HP storage stack is used. This includes supported
HP branded HBAs and drivers, and supported FC switches.
OS Support
Refer to the HP support statements for complete current OS version support:
http://www.hp.com/storage/spock
Fibre Channel ports
Microsoft Windows Server 2012
Microsoft Windows Server 2008 IA32, x64, IA64 (Standard, Enterprise, Datacenter)
Microsoft Windows Server 2008 R2 x64
Microsoft Windows 2003 SP1, SP2, and R2 and 2003 R2 IA32, x64
HP-UX
Red Hat Linux (32/64)
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 15
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
SuSE SLES (32/64)
Microsoft Windows Server 2008 x64 Hyper-V
VMware
OpenVMS
Apple Mac OS X (requires ATTO Celerity 8Gb FC HBA)
Solaris 10 (x86)
OS Support
HP-UX
Windows
Fibre Channel Ports
OpenVMS
(Integrity)
Linux
OS Support
Microsoft Windows Server 2012
Microsoft Windows Server 2008 and 2008 R2 (x64, IA64)
1GbE iSCSI ports
Microsoft Windows Server 2008 x64 Hyper-V
on the G3 Combo FC/iSCSI
Microsoft Windows 2003 (SP1, SP2, and R2) and 2003 R2 (IA32, x64)
Controller
Red Hat Enterprise Linux (32/64)
SuSE Linux IA32, x64
VMware ESX
OS Support
Refer to the HP support statements for complete current OS version support:
http://www.hp.com/storage/spock
G3 SAS Controller
OS Support
G3 1Gb iSCSI Controller
OS Support
G3 10GbE iSCSI Controller
Microsoft Windows Server 2012
Microsoft Windows Server 2008 IA32, x64
Microsoft Windows Server 2008 R2
Microsoft Windows 2003 and 2003 R2 IA32, x64
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2008 x64 Hyper-V
VMware
Solaris 10 (x86)
Microsoft Windows Server 2012
Microsoft Windows Server 2008 SP1, SP2, R2
Microsoft Hyper-V (x64 only)
Microsoft Windows Server 2003 and 2003 R2, SP2
VMware
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2012
Microsoft Windows Server 2008 SP1, SP2, R2
Microsoft Hyper-V (x64 only)
Microsoft Windows Server 2003 and 2003 R2, SP2
Red Hat Linux (32/64)
SuSE SLES (32/64)
VMware
NOTE: the G3 10GbE array must connect to a 10GbE switch; direct connect to the G3 10GbE array must be
to a 10GbE NIC and supported by the OS.
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 16
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Family Information
Web Browser support
The P2000 G3 and the older MSA2000 support target based management, and include a Web
interface and a telnet interface, and require a web browser for management.
The P2000 G3 FC requires Microsoft Internet Explorer V7.x or V8.x
The original MSA2000 and the MSA2000 G2 arrays require Microsoft Internet Explorer V6.X and V7.X
(strongly encouraged)
Mozilla Firefox 1.0.7 or later is supported
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 17
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Optional Software
VMware Site Recovery
Manager (SRM)
VMware Site Recovery Manager (SRM)
VMware vCenter Site Recovery Manager (SRM) is an extension to VMware vCenter that delivers businesscontinuity and disaster-recovery solution that helps you plan, test, and execute the recovery of vCenter
virtual machines. SRM can discover and manage replicated datastores, and automate migration of
inventory from one vCenter to another. Site Recovery Manager integrates with the underlying replication
product through a Storage Replication Adapter (SRA).
HP P2000 Site Recovery Adapter (SRA)
The HP P2000 SRA, a free-to-use plugin, is the program that integrates the VMware cCenter SRM with HP
P2000 G3 arrays. It enables full-featured use of the VMware SRM. It is a host-software component
installed on a Microsoft Windows Server that enables disaster recovery management (DRM) software on
the host to communicate and control certain aspects of the replication feature in storage systems
connected to the server. It allows the VMware SRM software to automatically coordinate virtual machine
failover and failback between a protected data center and a disaster recovery site by employing a disaster
recovery solution called Remote Snap. A perfect combination of the Remote Snap replication and VMware
SRM provides an unfailing automated solution for implementing and testing the disaster recovery between
sites located across geographies. It enables communication between the HP P2000 Remote Snap
replication functionality that is embedded in HP P2000 Fibre Channel, iSCSI, and Combo Fibre Channel
systems. Users are required to acquire Remote Snap license for their local and remote HP P2000 G3 arrays
to use the HP P2000 SRA.
Site Recovery Manager Requirements/Dependencies:
Requires vSphere 5.0/SRM 5.0
Not compatible with SRM 4.x
Requires HP's P2000 SRA 2.0 Plug-in (downloadable from Hp.com)
SRM works with Remote Snap functionality
Requires purchase of P2000 G3 Remote Snap licenses (one for each site)
Customers must upgrade to T240 or the latest firmware
SRM works with FC, iSCSI or Combo controllers only
HP Insight Control
Storage Module for
vCenter
HP Insight Control Storage Module for vCenter
HP Insight Control Storage Module for vCenter is a component within the HP Insight Control plug-in for
vCenter. It provides VMware administrators that are using VMware's vSphere management console
(vCenter) with the ability to see how virtual machines are mapped to datastores and individual P2000
volumes. By providing these clear relationships between VM's, datastores and storage, the VMware
administrator's productivity increases, as does the ability to ensure quality of service. Roles for
administrators can be defined on an individual basis, providing the ability to apply specific permissions for
both view and control functions.
The HP Insight Control Storage Module for vCenter supports mixed array environments including EVA,
P4000, P2000 (MSA), and the XP array series including the P9500.
When deployed with the P2000 array, provides the following:
Active Management functionality for the P2000 array:
Create/Expand/Delete a Datastore
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 18
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Optional Software
Create a Virtual Machine from a template
Monitors the health and status of the P2000
Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the
location and attributes of the P2000 within the SAN
Identifies what storage features are available to allow administrators to match the features
available on the P2000 to their requirements
Provide a cluster-level view of the storage
HP Insight Control Storage Module for vCenter is downloadable from Software Depot:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVPR
For more information on HP Insight Control Storage Module for vCenter visit: www.hp.com/go/vmware
vStorage API for Array
Integration (VAAI)
The vStorage API for Array Integration (VAAI) is one of the storage application programming interface (API)
sets in vSphere 4.1. VAAI is an API storage partners can leverage to enhance performance of virtual
machine (VM) management operations by delegating these operations to the storage array. With hardware
offload, ESX/ESXi hosts perform certain operations faster and consume less server CPU and memory
resources, and also storage port and storage fabric bandwidth. VAAI includes high performance and
scalable VM data path primitives. HP introduced VAAI support for HP MSA P2000 Storage array products
starting with the T230 firmware release.
Storage Hardware Primitives for VAAI
In the VMware vSphere 4.1 release, the HP StorageWorks P2000 G3 MSA Array Systems offload capabilities
support the following three primitives:
Full Copy or Hardware Assisted Move
Block Zeroing or Hardware Assisted Zeroing
Hardware Assisted Locking or Atomic Test and Set (ATS)
HP Storage Management The HP Management Pack for Systems Center Operations Manager provides seamless integration with
Microsoft Systems Center Operations Manager and now System Center Essentials by integrating
Pack for Microsoft
predefined discovery and state monitoring policies, event processing rules and tasks, and diagram and
System Center
topology views for the storage system.
For more information:
http://h18000.www1.hp.com/products/quickspecs/14249_div/14249_div.html
HP Storage Management Pack can be downloaded free from the following website:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=SCOM
Snapshot and Volume
Copy Software for the
P2000 G3
Product Features
Data Protection
Snapshots create up to 512 point-in-time pictures of data (512 snaps are exclusive to the P2000 G3)
Volume Copies create up to 128 point-in-time copies of data
Recovery is instant - revert data from any previous Snapshot or Volume Copy
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
A 64 snapshot license and Volume Copy are included with all P2000 G3 models.
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 19
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Optional Software
Support and updates are desired for bundled software functionalities (such as 64 LTU Snap and/or
Volume Copy etc in the P2000 G3 products) a combination HW + SW support care pack must be
purchased.
HP does not provide warranty assistance for software products included with our base hardware
products. This would either be SupportPlus or SupportPlus24. The hardware warranty component of
these services is accounted for in the pricing of the SP and SP24 care packs.
Data Testing
Snap or clone data to test the performance of a software application on 'offline' production data
Snap or clone data to test how a software patch or enhancement will function on 'offline; production
dat0061
P2000 G3 Snapshot and Clone:
G3 controllers/models come STANDARD with 64 snapshots and Volume Copy software
512 Snapshot option is ONLY available and supported with the G3, not the prior generation MSA2000
models
HP P2000 Snapshot 512 Software LTU
TA806A
HP P2000 Snapshot 512 Software E-LTU
TA806AAE
MSA2000 and MSA2000 G2 Snapshot and Volume Copy (clone) software:
Snapshot and Volume Copy software is optional on models other than the P2000 G3.
The following skus are designated for use by the MSA2000 G2 models. They are neither necessary nor
available for the P2000 G3 FC.
HP 2000 Modular Smart Array Snapshot 255 Software LTU1
T5539A
HP 2000 Modular Smart Array Snapshot 64 Software LTU
T5512A
HP 2000 Modular Smart Array Snapshot 8 Software LTU
T5513A
HP 2000 Modular Smart Array Snapshot 8 to 255 Upgrade Software LTU
T5540A
HP 2000 Modular Smart Array Snapshot 64 to 255 Upgrade Software LTU
T5541A
HP 2000 Modular Smart Array Snapshot 8 to 64 Upgrade Software LTU
T5515A
HP 2000 Modular Smart Array Volume Copy Software LTU
T5514A
1 The snapshot software is supported on G2 and G3 models only. 512 snaps only
applies to G3 controllers.
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 20
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Service and Support, HP Care Pack, and Warranty Information
Warranty
Three-year limited warranty, parts exchange Next Business day delivery
Enclosures, Hard drives, and Options for the P2000 G3 FC carry their own warranty. Refer to HP's Limited
Warranty Statement for more information.
The P2000 G3 FC has been designed with customer self repairable parts to minimize repair time and
provide greater flexibility in performing defective parts replacement. Please refer to HP's limited warranty
Statement and parts replacement instructions for further details.
http://h18006.www1.hp.com/products/storageworks/warranty.html
Products included in various kits carry their own individual warranties.
NOTE: The warranty of the hard drive options purchased with the P2000 G3 FC, SAS, and 10GbE iSCSI
products is different for SAS hard drives versus SAS MDL and SATA hard drives. SAS hard drive options have
a three year warranty and SAS MDL and SATA hard drives options have a one year warranty.
Technology Services
Technology Services for increased uptime, productivity and ROI
TRUST HP storage technology experts for every level of service and support. Our integrated portfolio of
Services for storage help customers reduce costs, optimize data, streamline storage management, and
improve backup and recovery. Capitalizing on HP Storage Systems' capabilities requires a service partner
who understands your increasingly complex environment. Team with the people who know HP
infrastructure hardware and software best-the experienced professionals at HP Services.
Protect your business beyond warranty
Warranty protects against manufacturer defects, however warranty uplifts, such as HP Care Pack Services
protect the business-by reducing downtime risks and providing operational consistency for missioncritical and standard business computing.
Support:
What HP Storage Technology Services can do for you
HP Storage Technology Services can help you design, deploy, test, integrate, support, and manage IT and
infrastructure solutions. HP storage lifecycle support services offers a full spectrum of customer carefrom technology support to complex migrations to complete managed services.
Choose from three levels of care for your HP MSA Storage environment. HP Technology Services are
personalized. You decide how, when, and where you receive support for your HP MSA Array Systems. Our
approach is proactive, leveraging products, tools, and technology to avoid problems and optimize
performance. And our portfolio is simplified-with straightforward choices to reduce complexity and risk,
plus a single point of contact you can count on throughout the support lifecycle.
Optimized care -Maintain optimum levels of storage performance and availability: HP Proactive Care
24x7 with 40 HP Proactive Select service credits per year -Specifically designed for complex environments,
this end-to-end environment support solution covers servers, operating systems, hypervisors, storage,
and storage area networks (SANs). We provide rapid response to incidents, addressed 24x7x365 through
HP advanced solution center support plus proactive reports for problem prevention. Choose from an
extensive menu of HP Proactive Select event and technical services, such as onsite firmware upgrades,
health checks, assessments, and education.
Standard care -Maintain high levels of storage availability: HP Proactive Care 24x7 with 30 Proactive
Select service credits per year - Specifically designed for complex environments, this end-to-end
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 21
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Service and Support, HP Care Pack, and Warranty Information
environment support solution covers servers, operating systems, hypervisors, storage, and SANs. We
provide rapid response to incidents, addressed 24x7x365 through HP's advanced solution center support
plus proactive reports for problem prevention. Choose from an extensive menu of HP Proactive Select
event and technical services, such as onsite firmware upgrades, health checks, assessments, and
education.
Basic care-Maintain storage with basic recommended support levels: HP Support Plus 24 with 10
Proactive Select service credits per year - This support service is designed for environments where
proactive help from HP is not required. HP provides 24x7 hardware and software support onsite, including
third-party support with a maximum 4-hour onsite response. We also provide cost-saving software
updates and monitor ongoing operations through the latest remote tools. Choose from an extensive menu
of HP Proactive Select event and technical services, such as onsite firmware upgrades, health checks,
assessments, and education.
Installation
Implement right from the start: Support that's included whatever levels of care you select-HP MSA
Storage Installation and Startup Service - HP installs, tests, and configures your tape hardware and
software onsite. We deliver a tailored storage deployment, properly integrated into your environment.
Additional services to
meet your needs
HP Data Migration Services -HP expertise and tools help you migrate data across your data center or
around the globe. Take the burden of migration off your shoulders and put it in the capable hands of
expert HP storage migration consultants. Our proven approach helps orchestrate the complete data
migration and consolidation process while maintaining consistent data availability during the transfer
process.
HP Proactive Select -HP Proactive Select is a flexible way to purchase services to fit your particular
environment or situation. Working with an HP Account Support Manager, you select a package of services
in the form of services credits that include proactive services spanning many technologies and processes,
such as onsite firmware upgrades, health checks, assessments, and education. You tailor the service
delivery to improve time to production, optimize performance, or build in continuous improvements.
For more information
Only HP brings together deep expertise, proactive and business critical support and a strong partner
network-plus, a full set of infrastructure services designed to power a Converged Infrastructure.
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
www.hp.com/go/lookuptool
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 22
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
Configure to Order Program Information
HP has a very successful Configure to Order program for the P2000 G3 family The P2000 G3 models and options may or may not be
factory installed in a rack with add-on controllers, switches, P2000 disk enclosures and hard drives. The P2000 G3 arrays may be
integrated with ProLiant servers or as standalone storage.
Orders to be shipped through the CTO process must have a minimum of two drives of the same type (SAS, SAS MDL, or SATA) ordered
per controller. SAN Starter Kits are not eligible for CTO.
Description
Product #
P2000 G3 Controllers & Controller-less Chassis
HP P2000 G3 FC Modular Smart Array Controller
NOTE: two 8Gb FC ports
AP836B#0D1
HP P2000 G3 FC/iSCSI Combo Modular Smart Array Controller
NOTE: two 8Gb FC ports and two 1GbE iSCSI ports
AP837B#0D1
HP P2000 G3 SAS Modular Smart Array Controller
NOTE: four 6Gb 4x SAS ports
AW592B#0D1
HP P2000 G3 10GbE iSCSI Modular Smart Array Controller
NOTE: two 10GbE iSCSI ports
AW595B#0D1
HP P2000 G3 iSCSI MSA Array System Controller
NOTE: four 1Gb Ethernet iSCSI ports
BK829B#0D1
HP P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)
NOTE: Will accept one or two controllers or Disk Enclosure I/O modules
AP838B#0D1
HP P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)
NOTE: Will accept one or two controllers, not I/O modules
AP839B#0D1
Disk Enclosures
HP P2000 Dual I/O LFF Drive Enclosure,
NOTE: twelve 3.5" drive bays
Used with single or dual controller LFF or SFF array head
HP P2000 LFF Drive Enclosure I/O Module
NOTE: no cable included. Designed for use with blank LFF chassis AP838A
AP843B#0D1
AP844B#0D1
Configured Units
HP P2000 G3 FC MSA Dual Controller LFF Modular Smart Array System
HP P2000 G3 FC MSA Dual Controller SFF Modular Smart Array System
HP P2000 G3 FC/iSCSI MSA Dual Combo Controller LFF Array
HP P2000 G3 FC/iSCSI MSA Dual Combo Controller SFF Array
HP P2000 G3 SAS MSA Dual Controller LFF Modular Smart Array System
HP P2000 G3 SAS MSA Dual Controller SFF Modular Smart Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System
DA - 13551 EMEA — Version 30 — May 13, 2013
AP845B#0D1
AP846B#0D1
AW567B#0D1
AW568B#0D1
AW593B#0D1
AW594B#0D1
AW596B#0D1
AW597B#0D1
Page 23
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
HP P2000 G3 iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 iSCSI MSA Dual Controller SFF Array System
BK830B#0D1
BK831B#0D1
HP D2700 Disk Enclosure
Rear Panel components
1. Power Supply 1
2. Power Supply 2
3. Fan 1
4. I/O Module A
5. I/O Module B
6. Fan 2
7. Rear UID push button
8. Enclosure LEDs
9. Power on/standby button
D2700
HP D2700 Disk Enclosure
NOTE: 25 Small Form Factor (SFF) drive bays
AJ941A#0D1
SAS & SATA Drives (SFF
2.5-inch)
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP P2000 300GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
NOTE: Go to the HP Hard Drive Compatibility table for complete drive compatibility
information (http://www.hp.com/products/harddiskdrives). Using hard drives in
unsupported configurations will result in voiding the warranty and could result in
damage to the drive and/or loss of data.
507127-B21
581284-B21
581286-B21
619291-B21
512547-B21
AP858A
605835-B21
507610-B21
507750-B21
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 24
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
Step 1 - P2000 G3 - Base Configuration
Select one:
Model Name
SKU
HP P2000 Modular Smart Array 3.5-inch Drive Bay Chassis
AP838B
Controller-less chassis with twelve Large Form Factor (LFF) drive bays. Space for two controllers.
HP P2000 Modular Smart Array 2.5-inch Drive Bay Chassis
AP839B
Controller-less chassis with twenty-four Small Form Factor (SFF) ProLiant drives bays. Space for
two controllers.
There are two array-head chassis - one with twelve 3.5-inch large form factor bays, the other with twenty-four 2.5-inch small form
factor drive bays. For an additional twelve drive bays purchase a P2000 3.5-inch Disk Enclosure. You may attach a total of seven P2000
Drive Enclosures for a total of ninety-six LFF drive bays. For 25 additional SFF drive bays purchase D2700 JBOD. You may attach a total
of five D2700 JBODs for a total of one hundred and forty nine SFF drive bays. Dual I/O modules JBODS support both single and dual
controller arrays.
Step 2 - Options
Select each option with quantities specified.
Step 2a - Options
Quantity Description with Parts Shipped:
SKU
1 or 2
HP P2000 G3 MSA Fibre Channel Controller
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis
AP836B
1 or 2
HP P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis
AP837B
1 or 2
HP P2000 G3 SAS MSA Array System Controller
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis
AW592B
1 or 2
HP P2000 G3 10GbE iSCSI MSA Array System Controller
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis
AW595B
1 or 2
HP P2000 G3 iSCSI MSA Array System Controller
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis
BK829B
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 25
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
Step 2b - SAS and SATA Drive Options
NOTE: SATA drives are designed for archival or reference data. They should not be used in a heavy or intense I/O environment. Those
situations require the use of enterprise-class SAS drives. P2000 3.5-inch drives are for use only with P2000 products.
P2000 Large Form Factor (LFF) SAS drives for P2000 G3 FC and P2000 3.5-inch Disk Enclosure
HP P2000 300GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP P2000 450GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP P2000 600GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
AP858A
AP859A
AP860A
P2000 Large Form Factor (LFF) SAS MDL DP drives for P2000 G3 FC and P2000 3.5-inch Disk Enclosure
HP P2000 1TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
HP P2000 2TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP MSA 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
NOTE: Before installing 3TB HDDs and higher in an P2000 G3 Array please update P2000 array controller firmware
to version TS230Rxxx or later
AP861A
AW555A
QK703A
C8R26A
MSA2 Large Form Factor (LFF) SATA drives for P2000 array head an P2000 disk enclosure
HP MSA2 1TB 7.2K rpm LFF (3.5 inch) Dual-port SATA Hard Disk Drive
HP P2000 2TB 3G SATA 7.2K rpm LFF MDL Hard Drive
AJ740B
AW556B
ProLiant Small Form Factor (SFF) SAS drives for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
507127-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
581284-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
581286-B21
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
619291-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
512547-B21
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard Drive
627117-B21
ProLiant Small Form Factor (SFF) SAS MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
507610-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
605835-B21
ProLiant Small Form Factor (SFF) SATA MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)
(NOTE: SFF SATA drives are single ported and therefore do not have a fail-over path intrinsic to their design)
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
507750-B21
Step 2c - Drive Enclosure Options
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 26
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
P2000 Dual I/O 3.5-inch 12 Drive Enclosure
Rear Panel components
1. Power Indicator
3.
Unit Locator
2. Fault Indicator
4.
SAS In Port
5.
SAS Out Port
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ship with two .5m mini-SAS to
mini-SAS cables.
HP P2000 Dual I/O LFF Drive Enclosure
HP D2700 Disk Enclosure
HP P2000 LFF Drive Enclosure I/O Module
NOTE: Only used in conjunction with the P2000 blank chassis (AP838A) if a single I/O disk enclosure is desired. No
cable included)
AP843B
AJ941A
AP844B
Step 2c - SAS Cable Options
miniSAS to miniSAS Cables:
Connecting P2000 G3 FC or SAS controller to a JBOD if a longer cable is desired. Also used for attaching the P2000
G3 SAS host ports to servers
HP External Mini SAS 2m Cable
DA - 13551 EMEA — Version 30 — May 13, 2013
407339-B21
Page 27
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
Step 3 - Other P2000 G3 Options
Choose optional AC Power Cords (2 required)
NOTE: Two PDU cables: one 142263-008 (Black) and one 1422633-013 (Grey), ship standard with all AC-powered
enclosures.
Power Cord, (Australia/China/New Zealand)
Power Cord, (Central Europe)
Power Cord, (United Kingdom/Hong Kong)
Power Cord, (Switzerland)
Power Cord, (Italy)
Power Cord, (Denmark)
227098-001
157215-001
157216-001
157219-001
157217-001
157218-001
Power Cord, (Japan)
Power Cord, (South East Asia/India)
139867-001
157220-001
Step 4a - Choose Supported Options For Fibre Channel Infrastructure
Fibre Channel
Host Bus Adapters X86 servers
Model
Description
SKU
BladeSystem c-Class Fibre Channel Mezzanine HBAs
QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem
HP BLc Emulex LPe1205- 8Gb FC HBA for HP c-Class BladeSystem
Lpe1105-HP 4Gb FC HBA for HP c-Class BladeSystem
QMH2462 4Gb FC HBA for HP c-Class BladeSystem Windows and Linux
Brocade 804 8Gb FC HBA for HP BladeSystem c-Class, Windows, VMware, Linux
Fibre Channel HBAs
451871-B21
456972-B21
403621-B21
403619-B21
590647-B21
NOTE: Please visit www.hp.com/go/fchba for product details and www.hp.com/storage/spock
for compatibility details.
Brocade Fibre Channel HBAs
HP 81B PCI-e FC HBA Single Port
HP 82B PCI-e FC HBA Dual Port
HP 41B 4Gb PCI-e FC HBA
HP 42B 4Gb Dual-Port PCI-e FC HBA
Emulex Fibre Channel HBAs
AP769B
AP770B
AP767B
AP768B
HP 81E PCI-e FC HBA Single Port
HP 82E PCI-e FC HBA Dual Port
HP FC2142 4Gb PCI-e HBA
HP FC2242 Dual Channel 4Gb PCI-e HBA
QLogic Fibre Channel HBAs
AJ762B
AJ763B
A8002B
A8003B
HP 81Q PCI-e FC HBA Single Port
HP 82Q PCI-e FC HBA Dual Port
HP FC1142 4Gb PCI-e HBA
HP FC1242 Dual Channel 4Gb PCI-e HBA
AK344A
AJ764A
AE311A
AE312A
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 28
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
Fibre Channel
Host Bus Adapters Integrity servers
Integrity
Integrity server
blades
Fibre Channel
Switches
HP 4Gb 1-port PCI-X 2.0 Fibre Channel Host Bus Adapter
HP 4Gb 2-port PCI-X 2.0 Fibre Channel Host Bus Adapter
HP 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP 4Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP PCIe 1-port 4Gb and 1-port 1000BT Adapter
HP PCIe 2-port 4Gb and 2-port 1000BT Adapter
HP PCIe 2-port 4Gb and 2-port 1000BSX Adapter
HP PCI-X 1-port 4Gb FC and 1-port 1000BT Adapter
HP PCI-X 2-port 4Gb FC and 2-port 1000BT Adapter
HP PCI Express 1-port 8Gb Fibre Channel SR (QLogic) Adapter
HP PCI Express 2-port 8Gb Fibre Channel SR (QLogic) Adapter
HP 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
HP 8/8 Base SAN Switch
HP 8/8 SAN Switch
HP 8/24 Base SAN Switch
HP 8/40 Base SAN Switch
HP 8/40 Power Pack+ SAN Switch
HP 8/80 Power Pack+ SAN Switch
HP 8/80 Base SAN Switch
HP 1606 Power Pack+ Extension SAN Switch
HP 1606 Full Extension SAN Switch
HP 1606 Base Extension SAN Switch
HP 2408 FCoE Base Converged Network Switch
HP 2408 FCoE Power Pack+ Converged Network Switch
Brocade 8/12c SAN Switch for HP BladeSystem c-Class
Brocade 8/24c SAN Switch for HP BladeSystem c-Class
Brocade 8/24c SAN Switch for HP BladeSystem c-Class Power Pack+
AB378B
AB379B
AD300A
AD299A
AD355A
AD221A
AD222A
AD393A
AD193A
AD194A
AH400A
AH401A
AH402A
AH403A
403621-B21
403619-B21
451871-B21
456972-B21
AM866B
AM867B
AM868B
AM869B
AM870B
AM872B
AM871B
AP864B
AP863B
AP862B
AP801B
AP802B
AJ820B
AJ821B
AJ822B
SKU
HP 8/20q Fibre Channel Switch
NOTE: 8 device ports active, upgradeable to 20 device ports active
DA - 13551 EMEA — Version 30 — May 13, 2013
AQ233A
Page 29
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
HP 8Gb Simple SAN Connection Kit
NOTE: 8 device ports active, upgradeable to 20 device ports active
AK241A
HP 8/20q Fibre Channel Switch
NOTE: 16 switch ports active
AK242A
HP SN6000 Stackable 8Gb 24-port single power supply FC Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW575B
HP SN6000 Stackable 8Gb 24-port dual power supply FC Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW576B
HP SN6000 Stackable 8 Gb 12-port Single Power Fibre Channel Switch
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device ports active
BK780B
Cisco MDS 9124 8-ports Active Fabric Switch
Cisco MDS 9124 16-ports Active Fabric Switch
Cisco MDS 9124 24-ports Active Fabric Switch
Cisco MDS 8Gb 12-port Fabric Switch for HP BladeSystem c-Class
Cisco MDS 8Gb 24-port Fabric Switch for HP BladeSystem c-Class
Cisco MDS 9124e 12-port Fabric Switch for HP c-Class BladeSystem
Cisco MDS 9124e 24-port Fabric Switch for HP c-Class BladeSystem
Cisco MDS 9134 24-ports Active Fabric Switch
Cisco MDS 9134 32-ports Active Fabric Switch
Cisco MDS 9222i Fabric Switch
HP SN6000C 16-ports Active Fabric Switch
HP SN6000C 32-ports Active Fabric Switch
HP Nexus 5010 Converged Network Switch
HP Nexus 5020 Converged Network Switch
PremierFlexOM4+
1m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable
type cable
2m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable
P2000 G2
5m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable
15m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable
30m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable
50m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable
OM3 FC LC-LC cables LC-LC Multi-Mode OM3 Fibre Channel Cable 0.5m
options for the P2000 LC-LC Multi-Mode OM3 Fibre Channel Cable 1m
G3
LC-LC Multi-Mode OM3 Fibre Channel Cable 2m
LC-LC Multi-Mode OM3 Fibre Channel Cable 5m
LC-LC Multi-Mode OM3 Fibre Channel Cable 15m
LC-LC Multi-Mode OM3 Fibre Channel Cable 30m
LC-LC Multi-Mode OM3 Fibre Channel Cable 50m
AG646A
AG647A
AG648A
AW563A
AW564A
AG641A
AG642A
AG874A
AG875A
AG851B
AW585A
AW586A
AP775A
AP776A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
Step 4b - Choose Supported Options For 10GbE Infrastructure
- verify that the cable/transceiver is supported with the connecting device (i.e. switch or NIC/iSCSI HBA)
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 30
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Configuration Information
Copper Cable
SFP
HP 0.5m SFP+ 10GbE Copper Cable
HP 1m SFP+ 10GbE Copper Cable
HP 3m SFP+ 10GbE Copper Cable
HP 5m SFP+ 10GbE Copper Cable
HP 7m SFP+ 10GbE Copper Cable
HP BladeSystem 10Gb SR SFP+
HP BladeSystem 10Gb LRM SFP+
HP ProCurve 10-GbE SFP+ 1m Direct Attach Cable
HP ProCurve 10-GbE SFP+ 3m Direct Attach Cable
HP ProCurve 10-GbE SFP+ 7m Direct Attach Cable
487649-B21
487652-B21
487655-B21
537963-B21
487658-B21
455883-B21
455889-B21
J9281B
J9283B
J9285B
iSCSI HBA - standup
HP ProCurve 10-GbE SFP+ SR Transceiver
HP ProCurve 10-GbE SFP+ LRM Transceiver
HP NC522SFP Dual Port 10GbE Server Adapter
HP NC524SFP Dual Port 10GbE Module
HP NC550SFP Dual Port 10GbE Server Adapter
HP NC522m Dual Port Flex -10 10GbE Multifunction BL-c Adapter
HP NC532m 10GbE Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
Qlogic QLe4062c
iSCSI HBA - mezz
HP BLc QLogic iSCSI Dual Port Adapter with Virtual Connect Kit
488074-B22
NIC - mezz
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter
467801-B21
NIC
J9150A
J9152A
468332-B21
489892-B21
581201-B21
467801-B21
467799-B21
581204-B21
Reference sell
Step 4c - Choose Supported Options For SAS connection
HP SC08e 6Gb SAS HBA for G6 and G7 rack servers
HP H221 Host Bus Adapter for Gen8 servers
HP Smart Array P712m Controller/256 for Server Blades
HP Smart Array P711m Controller/1 for Server Blades
HP 6Gb/s SAS BL Switch - Single Pack for BladeSystems
HP 6Gb/s SAS BL Switch - Dual Pack for BladeSystems
HP Ext Mini SAS 2M cable
HP Ext Mini SAS 4m cable - (only be used when connecting a SAS HBA or 6Gb SAS switch to a SAS
controller. Connecting it to disk enclosures is not supported.)
614988-B21
650931-B21
488348-B21
513778-B21
BK763A
BK764A
407339-B21
432238-B21
Step 5 - Choose Rack Options
Please refer to the HP Infrastructure products page for more information on HP racks and rack options or the HP 10000 G2 Series Rack
QuickSpec.
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.HTML
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 31
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Technical Specifications
P2000 G3 FC
P2000 G3 FC/iSCSI
P2000 G3 SAS
P2000 G3 10GbE iSCSI
P2000 G3 iSCSI (1Gb)
POWER REQUIREMENTS
Input Power Requirements
(typical-running I/O)
SFF/LFF arrays
8G FC (2 Port - 8G FC) 110VAC 3.32A, 344-390 W; 220VAC 1.61A,374432W
FC/iSCSI Combo (2 Port - 8G FC + 2 Port -1G iSCSI)
110VAC; 3.64A,357-418W, 220VAC 1.77 A, 365-424W
6G SAS (4 Port - 6G SAS) 110VAC 3.49A,344-390W, 220VAC 1.7A 374432W
10GbE iSCSI (2 Port - 10 GbE iSCSI) 110VAC 3.67A, 395W, 220VAC,1.95A
388.2W
1G iSCSI (4 Port - 1GbE iSCSI) 110VAC 3.3A 363W, 220VAC, 1.63A 360W
Max Input Power
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
Heat Dissipation
1622 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature
41°F to 104°F (5°C to 40°C)
Shipping Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
Sound Pressure
SHOCK AND VIBRATION
A weighted sound power LWAd=6,75 B
A weighted sound pressure LpAm - 55dB
Shock, Operational
Shock, Non-Operational
Vibration, Operational
Vibration, Non-Operational
PHYSICAL
10G's for 10 milliseconds
15G 11ms half sine
5-500Hz, 0.21Grms flat
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
Height
Depth (excluding cables)
(back of ear to back of
controller handle)
Width (body only)
Chassis Weight
(no controllers)
3.5 in/ 8.9 cm
P2000 G3 SFF 24-bay array: 20.28 in / 51.510 cm
P2000 G3 LFF 12-bay array: 21.3 in. / 55.1 cm
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
P2000 LFF chassis: 34.1 lbs. (DC-pwr model: 37.9 lbs)
P2000 SFF chassis: 32.3 lbs (DC-pwr model: 36.1 lbs)
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 32
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Technical Specifications
P2000 G3 FC Controller
User Interface
FC/iSCSI Combo Controller RAID Support
P2000 G3 SAS Controller
Cache Memory
P2000 G3 10GbE iSCSI
Controller
Cache Backup
Upgradeable Firmware
P2000 G3 iSCSI Controller Disk Drive and Enclosure
(1Gb)
Protocol Support
Host Ports
Expansion Port
P2000 G3
Regulatory Info
Status and activity provided via management interfaces. Status Indicators on
front of Controller
0, 1, 3, 5, 6, 10, 50
2GB Read/Write. ECC protection with backup to Flash memory (indefinite
backup)
ECC protection with back up to flash memory (indefinite backup)
yes
6 Gb SAS - Serial Attached SCSI
FC: 2 x 8Gb Fibre Channel SFP+
SAS: 4 -4x lane 6 Gb SAS Host Connections
10GbE iSCSI: 2 x 10GbE SFP+
1GbE iSCSI: 4 x 1GbE RJ45
SAS (SFF8088) 4x lane 6 Gb SAS
Weight, controller
P2000 G3 Fibre Channel, FC/iSCSI, SAS, and 10GbE iSCSI MSA Controllers
4.5lbs. 1GbE iSCSI is 4.89 lbs
Safety
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International
Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS-6/6 Compliance, China RoHS, WEEE
Electromagnetic
Compatibility
RoHS and WEEE
Country Approvals
United States ,Australia/New Zealand, Canada, China (PRC), European Union,
Germany (GS Mark), Japan, South Korea, Taiwan
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 33
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Technical Specifications
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 13551 EMEA — Version 30 — May 13, 2013
Page 34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement