Aruba 130 Series Data Sheet »

Aruba 130 Series Data Sheet »
Aruba 130 Series Access Points
Aruba Data Sheet
Aruba 130 SERIES ACCESS POINTS
Maximize the performance of mobile devices
The 130 series can be configured to provide part-time or
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations to
corporate resources, and wireless mesh connections where
Ethernet drops are not available.
CHOOSE YOUR OPERATING MODE
The 130 series of APs offers a choice of operating modes to meet
your unique management and deployment requirements.
Multifunctional 130 series wireless access points (APs)
maximize mobile device performance in extremely highdensity Wi-Fi environments and ensure strong threat
protection using integrated MACSec security.
These ultra-high-performance 802.11n APs deliver wireless data
rates up to 450 Mbps per radio and employ three spatial streams
to support 50% more throughput and mobile devices than
previous-generation APs.
• Controller-managed mode. When managed by Aruba Mobility
Controllers, 130 series APs offer centralized configuration, data
encryption, policy enforcement and network services, as well as
distributed and centralized traffic forwarding. Please refer to the
Aruba Mobility Controller data sheets for more details.
• Aruba Instant™ mode. In Aruba Instant mode, a single AP
automatically distributes the network configuration to other
Instant APs in the WLAN. Simply power-up one Instant AP,
configure it over the air, and plug in the other APs – the entire
process takes about five minutes.
MACSec authentication and encryption on Ethernet ports enable
secure AP deployment by interoperating with the MACSec
capability on Aruba Mobility Access Switches and other wiring
closet equipment.
For large installations across multiple sites, the Aruba Activate™
service significantly reduces deployment time by automating
device provisioning, firmware upgrades, and inventory
management. With Aruba Activate, Instant APs are factory-shipped
to any site and configure themselves when powered up.
The AP-135 and IAP-135 APs feature a 2.4-GHz and 5-GHz radio,
each with 3x3 MIMO and three integrated omni-directional downtilt
antennas. The AP-134 and IAP-134 models feature the same radios
with three (combined, diplexed) external antenna connectors.
If WLAN and network requirements change, a built-in migration
path allows 130 series Instant APs to become part of a WLAN that
is centrally managed by a Mobility Controller.
WI-FI CLIENT OPTIMIZATION
Advanced Features
The 130 series APs additionally support priority handling and
policy enforcement for individual Microsoft Lync media on the
same device, including encrypted videoconferencing, voice, chat
and desktop sharing.
• Spectrum Analysis:
-- Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz
radio bands to identify sources of RF interference.
• Security:
-- With an OpenDNS service subscription, Aruba Instant delivers
integrated web filtering, malware and botnet protection to
every device connected to the WLAN
-- Integrated Trusted Platform Module (TPM) for secure storage
of credentials and keys
-- SecureJack-capable for secure tunneling of wired
Ethernet traffic
BEST-IN-CLASS RF MANAGEMENT
OPERATING MODES
All Aruba APs include Adaptive Radio Management™ technology,
which is essential to creating the most reliable, high-performance
WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to
optimize Wi-Fi client performance and ensures that APs stay clear
of RF interference.
• 802.11a/b/g/n Aruba Instant AP
• 802.11a/b/g/n Mobility Controller-managed AP
• Air monitor (AM)
• Secure enterprise mesh
• Remote AP (RAP) when used with a Mobility Controller
To eliminate sticky client behavior, every Aruba AP comes with
ClientMatch™ technology, which continuously gathers session
performance metrics and utilizes this data to steer mobile devices
to the best AP and radio on the WLAN, even while users roam.
QUALITY OF SERVICE FOR LYNC
Aruba 130 Series Access Points
Wireless Radio Specifications
• AP type: Dual-radio, dual-band 802.11n indoor
• Software-configurable dual radio supports 2.4 GHz and 5 GHz
• 3x3 MIMO 802.11n with three spatial streams and up to
450 Mbps per radio
• Supported frequency bands (country-specific restrictions apply):
-- 2.400 to 2.4835 GHz
-- 5.150 to 5.250 GHz
-- 5.250 to 5.350 GHz
-- 5.470 to 5.725 GHz
-- 5.725 to 5.850 GHz
• Available channels: Dependent upon configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
-- 802.11b: Direct-sequence spread-spectrum (DSSS)
-- 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
-- 802.11n: 3x3 MIMO with three spatial streams
• Supported modulation types:
-- 802.11b: BPSK, QPSK, CCK
-- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power (aggregated for three active
transmit chains):
-- 2.4 GHz: 23 dBm (limited by local regulatory requirements)
-- 5 GHz: 23 dBm (limited by local regulatory requirements)
• Maximum ratio combining (MRC) for improved receiver performance
• Cyclic delay diversity for improved downlink RF performance
• Short guard interval for 20-MHz and 40-MHz channels
• Space-Time Block Coding (STBC) for increased range and
improved reception
• Low-density parity check (LDPC) for high-efficiency error
correction and increased throughput
• Transmit beam-forming (TxBF) for increased reliability in signal
delivery (Supported in hardware; currently not enabled in software)
• Association rates (Mbps):
-- 802.11b: 1, 2, 5.5, 11
-- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
-- 802.11n: MCS0 to MCS23 (6.5 Mbps to 450 Mbps)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
Power
• 48 volts DC 802.3af power over Ethernet (PoE) or 802.3at PoE+
-- Note: when using 802.3af POE, the second Ethernet port is
disabled. It is enabled when using an 802.3at POE power
source (or direct DC power).
• 12 volts DC external AC supplied power (adapter sold separately)
• Maximum power consumption: 12.5 watts
ANTENNA
• AP-134 and IAP-134: Three RP-SMA connectors for external
dual-band antennas
• AP-135 and IAP-135: Six integrated downtilt omni-directional
antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi
in 2.4 GHz and 4.5 dBi in 5 GHz
Interfaces
• Network: Two 10/100/1000BASE-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
Aruba Data Sheet
• Ethernet ports support MACSec encryption and 802.3az EEE
• 48 volts DC 802.3af PoE or 802.3at PoE+ interoperable with
intellisource power sourcing equipment (both ports)
• Other: One RJ-45 console interface
Mounting
• Included with AP:
-- Mounting brackets for attaching to 9/16” and 15/16” T-bar
drop-tile ceiling
-- Kensington security lock point
• Optional mounting kits:
-- AP-130-MNT: Aruba 130 series AP mount kit contains one
flat-surface wall/ceiling mount bracket.
-- AP-130-MNT-C2: Aruba 130 series AP mount kit contains
two ceiling-grid rail adapters for interlude and silhouette
style rails.
-- AP-130-MNT-W2: Aruba 130 series AP mount kit contains
one flat-surface wall/ceiling secure mount cradle.
Mechanical
• Dimensions/weight (unit):
-- 170 mm x 170 mm x 45 mm (6.69” x 6.69” x 1.77”)
-- .76 kg (1.68 lb)
• Dimensions/weight (shipping):
-- 285 mm x 240 mm x 70 mm (11.22” x 9.45” x 2.76”)
-- 1.05 kg (2.31 lb)
Environmental
• Operating:
-- Temperature: 0° C to +50° C (+32° F to +122° F)
-- Humidity: 5% to 95% non-condensing
• Storage and transportation temperature range:
-- Temperature: -40° C to +70° C (-40° F to +158° F)
Regulatory
• FCC/Industry of Canada
• CE Marked
• R&TTE Directive 1995/5/EC
• Low Voltage Directive 72/23/EEC
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and approvals,
please see your Aruba representative.
Certifications
• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi certified 802.11a/b/g/n
Warranty
• Limited lifetime warranty
Minimum ArubaOS Version
• ArubaOS 6.1.1.0 on an Aruba Mobility Controller
• Aruba Instant 2.0.0.3 software
Aruba 130 Series Access Points
Aruba Data Sheet
iap-135 and ap-135 RF PERFORMANCE TABLE
Max transmit power
per active transmit
chain (dBm)
Receive sensitivity
(dBm)
Max transmit power
per active transmit
chain (dBm)
2.4 GHz
802.11b
1 Mbps
11 Mbps
802.11a/g
6 Mbps
54 Mbps
802.11n HT20
MCS0/8/16
MCS7/15/23
802.11n HT40
MCS0/8/16
MCS7/15/23
Receive sensitivity
(dBm)
5 GHz
18
18
-97
-92
–
–
–
–
18
16
-94
-81
18
16
-94
-82
17
12
-94
-78
17
12
-94
-78
17
11
-92
-75
17
11
-92
-74
Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.
RF performance numbers for IAP-134 and AP-134 are slightly lower due to additional internal RF circuitry.
iap-135 and AP-135 antenna pattern plots
2.450 GHz, H-Plane, 20 degrees down-tilt
H-plane
5.500 GHz, H-Plane, 20 degrees down-tilt
H-plane
2.450 GHz, E-plane, AP facing down
E-plane
5.500 GHz, E-plane, AP facing down
E-plane
Aruba 130 Series Access Points
Aruba Data Sheet
Ordering Information
Part Number
Description
IAP-135
IAP-135-US
IAP-135-IL
IAP-135-JP
AP-135
IAP-134
IAP-134-US
IAP-134-IL
IAP-134-JP
AP-134
AP-130-MNT
AP-130-MNT-W2
AP-130-MNT-C2
AP-AC-UN
AP-AC-12V18
Aruba Instant 135 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, integrated antenna. Restricted regulatory domain –
ROW. This product must not be deployed in the United States, Japan or Israel.
Aruba Instant IAP-135 wireless AP, 802.11a/b/g/n, 3x3:3, dual radio, integrated antennas. Contains: AP, installation guide and
two ceiling rail mount adapters. Restricted regulatory domain: United States
Aruba Instant IAP-135 wireless AP, 802.11a/b/g/n, 3x3:3, dual radio, integrated antennas. Contains: AP, installation guide and
two ceiling rail mount adapters. Restricted regulatory domain: Israel
Aruba Instant IAP-135 wireless AP, 802.11a/b/g/n, 3x3:3, dual radio, integrated antennas. Contains: AP, installation guide and
two ceiling rail mount adapters. Restricted regulatory domain: Japan
Aruba AP-135 wireless AP, 802.11a/b/g/n, 3x3:3, dual radio, integrated antennas. Contains: AP, installation guide and two
ceiling rail mount adapters.
Aruba Instant 134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, antenna connectors. Restricted regulatory domain –
ROW. This product must not be deployed in the United States, Japan or Israel.
Aruba Instant 134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, antenna connectors. Restricted regulatory
domain: United States
Aruba Instant 134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, antenna connectors. Restricted regulatory
domain: Israel
Aruba Instant 134 Wireless Access Point, 802.11abgn, 3x3:3, dual radio, antenna connectors. Restricted regulatory
domain: Japan
Aruba AP-134 wireless AP, 802.11a/b/g/n, 3x3:3, dual radio, antenna connectors. Contains: AP, installation guide and two
ceiling rail mount adapters.
Aruba 130 series AP mount kit contains one flat-surface wall/ceiling mount bracket.
Aruba 130 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle.
Aruba 130 series AP mount kit contains two ceiling-grid rail adapters for interlude and silhouette style rails.
12-volt DC universal AC power adapter kit – North America, Japan, United Kingdom, Italy, EC (Europlug), Australia, China,
India, Korea
12-volt DC/18-watt AC power adapter. Does not include country specific power cord
www.arubanetworks.com
1344 Crossman Avenue. Sunnyvale, CA 94089
1-866-55-ARUBA | Tel. +1 408.227.4500 | Fax. +1 408.227.4550 | info@arubanetworks.com
© 2013 Aruba Networks, Inc. Aruba Networks’ trademarks include AirWave®, Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, Aruba Mobility
Management System®, Mobile Edge Architecture®, People Move. Networks Must Follow®, RFProtect®, and Green Island®. All rights reserved. All other trademarks are the property of their respective
owners. DS_AP130Series_052913
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising