Connectivity Brochure
Connectivity Solutions
Connectivity Solutions for Embedded Design
USB, Ethernet, Wi-Fi®, Bluetooth®, ZigBee®, MiWi™ Wireless
Networking Protocol, IoT, CAN, LIN, IrDA® and RS-485 Protocols
www.microchip.com/connectivity
Embedded Wireless Solutions
Targeting the Need for Low-Power Wireless Connectivity
Wireless communication technologies have been commonplace in homes and industry for many years. Recent trends in
cloud computing, Internet of Things (IoT) and Smart Grid initiative have created a renewed demand for standardized, lowpower wireless technology in metering, home, business and industrial automation markets. As a result, Microchip offers
many IEEE 802.11™, IEEE 802.15.4™ and ZigBee® standard solutions along with our proprietary MiWi™ wireless networking
protocol for both 2.4 GHz and Sub-GHz to address this need.
Wi-Fi® IEEE 802.11
MRF Wi-Fi Series
Microchip has a broad portfolio of Wi-Fi products including
complete agency-certified 802.11 b/g modules, 802.11
b/g Wi-Fi transceivers and RF chipset solutions that make
adding Wi-Fi simple. Our modules include full TCP/IP
stacks and networking services in compact surface mount
components, saving you development time and testing cost.
■ Low power for battery-powered applications
■ Regulatory agency-certified
■ WEP, WPA1, WPA2, WPA-EAP Security
■ Supports SoftAP, Ad hoc and Infrastructure
networking modes
■ Supports WPS, FTP, HTTP, DHCP, Wi-Fi Direct and more
■ Over-the-air firmware upgrade
MRF24WB0MA/MB, MRF24WG0MA/MB
RN Wi-Fi Series
RN171, RN131 Modules
■ Full on-board TCP/IP stack and
services (no external drivers
required or royalties)
■ Simple ASCII command interface
■ Works with any microcontroller
RN171 Wi-Fi Evaluation Kit (RN-171-EK)
The RN-171-EK is an 802.11 b/g Wi-Fi
evaluation kit for the RN171 module.
It can be used to quickly add Wi-Fi
connectivity to embedded applications.
It has the flexibility to connect directly
to a PC via a standard USB interface or to embedded
processors through the TTL/UART interface. The board
includes two convenient pushbuttons for controlling both
SoftAP and WPS modes without software configuration.
The status LEDs and jumpers enable rapid prototyping and
integration into existing systems.
RN171 Wi-Fi PICtail™/PICtail Plus Daughter Board
(RN-171-PICtail)
The RN-171-PICtail allows you to
easily develop Wi-Fi applications using
Microchip’s 8-, 16- and 32-bit PIC®
microcontrollers. It includes a fully
integrated TCP/IP stack allowing for a
simple serial-to-Wi-Fi connection to the microcontroller.
■ Royalty-free TCP/IP stack and services
on PIC microcontroller
■ Full service implementations for web
server, email, FTP
■ IPv4 and IPv6 support
Wi-Fi G Demo Board (DV102412)
The Wi-Fi G Demo Board is a compact
demonstration platform which allows you to
easily evaluate and configure the fully certified
MRF24WG0MA 802.11 b/g Wi-Fi module. The
demo board is a fully functional standalone
web server powered by two AAA batteries. It
comes with the MRF24WG0MA Wi-Fi module
connected to a PIC32 with TCP/IP stack preconfigured to serve web pages and show SoftAP, Wi-Fi
Direct client and WPS functions.
MRF24WG0MA Wi-Fi G PICtail/PICtail Plus
Daughter Board (AC164149)
The MRF24WG0MA Wi-Fi PICtail/PICtail Plus
Daughter Board is a demonstration board
for evaluating Wi-Fi connectivity using PIC
microcontrollers and the MRF24WG0MA
module.This product is compatible with the
Explorer 16 Development Board (DM240001),
PICDEM.net™ 2 Development Board
(DM163024) and PIC32 Starter Kit (DM320001) with I/O
Expansion Board (DM320002).
More information is available at: www.microchip.com/wifi.
WCM Development Kit 1 (DM182020)
The Wi-Fi Client Module (WCM)
Development Kit 1 is designed to enable
you to quickly and easily connect an
embedded system to a cloud-based
server, such as Amazon Web Services
(AWS). This will reduce the learning curve
and help you get connected to the cloud quickly. This entire
ecosystem can be se tup in a matter of a few minutes by
launching Microchip's Amazon Machine Image (AMI) via the
AWS Marketplace, commissioning the development kit to
connect to your local Wi-Fi router and run the demo.
More information is available at: www.microchip.com/iot.
www.microchip.com/wireless
2
Connectivity Solutions
Embedded Wireless Solutions
Targeting the Need for Low-Power Wireless Connectivity
Certified Bluetooth® Modules
RN52 Module
Bluetooth is finding a home in multiple new markets
thanks to the Smartphone and other mobile devices.
Microchip recognizes the value of Bluetooth connectivity
and is leading the way with low-power Bluetooth solutions
designed for drop-in connectivity.
■ Bluetooth 4.1 Low Energy (BTLE) module with complete
on-board stack
■ Bluetooth Classic 2.1 + EDR and 3.0 (audio only)
compact surface mount modules
■ Class 1 and Class 2 modules with an onboard stack,
multiple embedded Bluetooth profiles and a simple
ASCII command interface
■ Work seamlessly with Android™ and iPhone® devices
RN52 Audio Bluetooth Evaluation Kit (RN-52-EK)
RN4020 Bluetooth Low Energy Module
■ Fully certified Bluetooth version 4.1 module
■ On-board embedded Bluetooth
low energy stack
■ Simple ASCII command interface over UART
■ Data streaming with Microchip's Low
Energy Data Profile (MLDP)
■ Scripting for stand-alone module operation with analog
and digital data collection
RN4020 PICtail/PICtail Plus Daughter Board
(RN-4020-PICTAIL)
■ For flexible development with the
RN4020 BTLE module
■ Connection and data status LEDs
■ USB to UART interface to quickly
get started
■ PICtail and PICtail Plus interfaces for connection to
Microchip development boards
■ eXtreme Low Power PIC18F25K50 MCU on board
■ PICkit™ serial programmer/debugger interface
RN41/RN42 Modules
■ Low-power embedded modules
■ On-board embedded Bluetooth stack
(no host processor required)
■ Supports SPP, HID, HCI, iAP
■ UART data connection
hardware interface
■ Auto-discovery/auto-connect requires no software
configuration (instant cable replacement)
RN42 Bluetooth Evaluation Kit (RN-42-EK)
The RN-42-EK is a fully certified
Class 2 Bluetooth evaluation kit
for the RN42 module. It has the
flexibility to connect directly to a PC
via a standard USB interface or to
embedded processors through the TTL UART interface. The
status LEDs, switches and signal headers enable rapid
prototyping and integration into existing systems.
■ Fully certified Bluetooth version 3.0 audio
module, fully compatible with Bluetooth
version 2.1 + EDR, 1.2, and 1.1
■ Software configurable through commands
over UART console interface
■ Embedded Bluetooth stack profiles:
SPP, A2DP, HFP/HSP, and AVRCP
■ Enables Audio streaming from iPhone, iPod®, iPad® and
Android smartphones and accessories
■ Additional support for codecs such as aptX®, AAC, MP3,
and others
■ Based on RN52 Bluetooth
audio module
■ Demonstrates key features of RN52
module for embedded systems
■ Allows designers to develop prototypes and
proof of concept
■ USB port to supply power and access to
command interface
■ Built-in amplifier for stereo audio output and
six function buttons
More information is available at: www.microchip.com/bluetooth.
PIC32 MCU Plus Bluetooth
PIC32 Bluetooth Starter Kit (DM320018)
The PIC32 Bluetooth Starter Kit is a lowcost Bluetooth development platform
featuring the PIC32MX270F256D MCU.
This kit features an HCI-based Bluetooth
radio, pushbuttons, Cree high-output
multi-color LED, standard single-color
LEDs, accelerometer, temperature sensor and GPIO for
rapid development of Bluetooth data-based Serial Port
Profile (SPP) applications.
PIC32 Multimedia Expansion Board II (DM320005-2)
■
■
■
■
■
■
■
■
■
The Multimedia Expansion Board II (MEB-II)
is a highly integrated, compact and flexible
development platform which works with the
PIC32MZ Starter Kit.
■ Low-cost Bluetooth HCI transceiver
24-bit stereo audio codec
Integrated 802.11 b/g wireless module
Optional EBI SRAM memory
4.3" WQVGA PCAP touch display daughter board
microSD™ slot
mTouch® sensing solutions buttons
Analog temperature sensor
VGA camera
PICtail connector
www.microchip.com/wireless
Connectivity Solutions
3
Embedded Wireless Solutions
Targeting the Need for Low-Power Wireless Connectivity
PIC32 Bluetooth Audio Development Board
(DV320032)
■
■
■
■
■
■
■
The PIC32 Bluetooth Audio Development
kit provides a comprehensive solution to
develop Bluetooth A2DP audio streaming
applications.
■ PIC32MX450/470 MCU
HCI Bluetooth module Daughter Card
(QDID-certified module)
16/24-bit, 32–192 kHz DAC/Amp Daughter Card
USB Host/Device audio support
USB charging
2 inch color LCD display
Headphone/line out
Audio control function
Bluetooth/USB Audio Software Support for:
■ Apple®*
■ Samsung™ audio
■ Google®/Android AOA Audio
■ Bluetooth Audio with SBC and AAC Decode
■ Bluetooth Stack QDID-Certified
Microchip offers three Bluetooth audio software suites:
■ PIC32 Bluetooth SBC only Audio Software Suite
■ PIC32 Bluetooth SBC and AAC Decoder Audio
Software Suite
■ PIC32 Bluetooth Break-In Mode with SBC Audio
Software Suite
The Advanced Audio Distribution Profile (A2DP), Audio/
Video Remote Control Profile (AVRCP), Serial Port Profile
(SPP), and Service Discovery Protocol (SDP)—provided
in the binary form—are common to all the three suites.
This Bluetooth binary code is combined with application
source code for operation on the PIC32 Bluetooth Audio
Development Kit (DV320032).
Additional software support is included in the latest
version of suites for:
■ Parametric and Graphical Equalizer functions
■ User-configurable voice prompts
■ User-configurable button press
■ Removed RTOS requirement
Wi-Fi: RN171XV
■
■
■
■
Bluetooth: RN41XV/RN42XV
■ Agency-certified Bluetooth module,
supports version 2.1 + EDR
■ UART (SPP) data connection interface
■ Embedded Bluetooth stack profiles
included: SPP, HID, HCI
■ Multiple antenna options available: (RN41) Chip antenna,
U.FL connector, (RN42) PCB trace antenna
ZigBee IEEE 802.15.4: (2.4 GHz)
MRF24XA, MRF24J40/MA/MC/MD Modules
Microchip offers ZigBee-certified platforms for ZigBee
PRO and ZigBee RF4CE protocol stacks, ensuring
interoperability and reliable communication.
■ ZigBee PRO Stack
■ Smart Energy Profile
■ ZigBee RF4CE and ZRC Profile
■ 2.4 GHz IEEE 802.15.4 compatible transceivers
and modules
■ FCC, IC and ETSI agency certified
■ Supports ZigBee and MiWi wireless networking protocol
development environment
More information is available at www.microchip.com/zigbee.
Sub-GHz Solutions: (433/868/915/950 MHz)
MRF49XA/MRF89XA/M8A/M9A Modules
Microchip's Sub-GHz MRF modules are
designed to bring simplicity to RF design along
with regional regulatory certification. The
modules target the lowest-cost proprietary
radio link market and offer industry-leading
characteristics including low power and large
link budgets.
*For Apple USB Authenticated applications contact applesupport@microchip.com.
XBee®-Compatible Wi-Fi and Bluetooth
Socket Modules
Some designers want an easy way to migrate their
802.15.4 designs to either Wi-Fi or Bluetooth to make them
accessible from smartphones and tablets or to add Internet
connectivity. The RNXV series of Wi-Fi and Bluetooth socket
modules provide agency-certified drop-in connectivity for any
XBee socket. To simplify designs, the stacks are integrated
on the module, configured via simple ASCII commands and
can easily connect to any MCU via a serial interface.
4
Connectivity Solutions
Direct Internet connectivity
Full 802.11 b/g data rate support
On-board TCP/IP stack
SoftAP and infrastructure modes
■
■
■
■
■
■
■
■
433/868/915/950 MHz transceiver and modules
Low receive current = 3 mA
Transmit power = +12.5 dBm
Receiver sensitivity: −107 dBm FSK/−113 dBm OOK
Integrated PCB antenna and matching circuit components
FCC, IC and ETSI agency certified
Surface-mountable PCB
Supports MiWi wireless networking protocol
development environment
Embedded Wireless Solutions
Targeting the Need for Low-Power Wireless Connectivity
MRF89XAM8A PICtail/PICtail Plus Daughter Board
(AC164138-1) and MRF89XAM9A PICtail/PICtail
Plus Daughter Board (AC164138-2)
Targeted for the MiWi Protocol Development
Environment and other proprietary wireless
protocol applications, the MRF89XAM8A/9A
PICtail/PICtail Plus Daughter Board is a
demonstration and development daughter
board for the MRF89XAM8A/9A, an ETSIcertified 868/915 MHz radio transceiver module. The
module is surface mounted to a PICtail/PICtail Plus daughter
board that plugs into multiple Microchip demonstration and
development boards like the PICDEM™ PIC18 Explorer Board
(DM183032) for 8-bit microcontroller development, or the
Explorer 16 Development Board (DM240001) for 16-bit and
32-bit microcontroller development.
MRF24J40MA PICtail/PICtail Plus (AC164134-1)
The MRF24J40MA PICtail/PICtail Plus
Daughter Board is a demonstration and
development daughter board for the
MRF24J40MA IEEE 802.15.4, 2.4 GHz
RF Transceiver module. The daughter
board plugs into multiple Microchip
demonstration and development boards,
including the PIC18 Explorer Board (DM183032) for
8-bit microcontroller development or the Explorer 16
Development Board (DM240001) for 16-bit and 32-bit
microcontroller development.
MRF24XA PICtail/PICtail Plus Daughter Board
(AC164152-1)
MiWi Wireless Networking Protocol
Development Environment
The MiWi Wireless Networking Procotol Development
Environment is designed to provide a smaller-footprint,
lower-resource communication protocol stack for peerto-peer and mesh wireless networks. It is intended for
customers who desire robust communication in a closed
or private wireless network at either 2.4 GHz or Sub-GHz
operation frequency.
■ MiWi Wireless Networking Protocol P2P
■ MiWi Wireless Networking Protocol
■ MiWi Wireless Networking Protocol PRO
More information is available at: www.microchip.com/miwi.
MiWi Wireless Networking Protocol to Wi-Fi
Wireless Demo Kit (DM182018)
The MiWi Wireless Networking Protocol
to Wi-Fi Wireless Demo Kit allows you
to evaluate and experiment with MiWi
wireless networking protocol to Wi-Fi
gateway solutions. The kit includes
a wireless evaluation board with both MiWi wireless
networking protocol and Wi-Fi transceivers. It also includes
two MiWi wireless networking protocol demo boards to
create a three-node MiWi wireless networking protocol
network. The MiWi Wireless Networking Protocol to
Wi-Fi Demo Kit is pre-programmed with a wireless demo
program, which demonstrates how to commission and
control the MiWi wireless networking protocol P2P network
from a web browser.
The MRF24XA PICtail/PICtail Plus Daughter
Board is a demonstration and development
daughter board for the MRF24XA lowpower, 2.4 GHz, ISM-Band IEEE 802.15.4
RF Transceiver. The daughter board plugs
into multiple Microchip demonstration and
development boards, including the PIC18 Explorer Board
(DM183032) for 8-bit microcontroller development or the
Explorer 16 Development Board (DM240001) for 16-bit
and 32-bit microcontroller development.
The Wireless Development Studio (WDS)
Integrated MCU + RF
Remote Control Demo Board (DM240315-2)
Low-power Sub-GHz transmitters with PIC MCUs in
a single package for remote keyless entry, garage
door openers, remote control and other one-way
communication applications.
■ PIC12F529T48A/39A
■ PIC12LF1840T48A/39A
■ PIC16LF1824T39A
The WDS is a Java-based Graphic User Interface (GUI)
which allows quick and easy development of wireless
applications based on the MiWi wireless networking
protocols. It features a MiWi wireless networking
protocol sniffer for monitoring, debugging and gathering
information and a configurator with a GUI to enable simple
customization and configuration of wireless networks.
Development Tools
This board integrates graphics, mTouch
technology, USB and RF4CE into a single
demo. It features the PIC24FJ256DA210 MCU,
a 3.5" graphical TFT LCD with resistive touch
screen, capacitive touch keys with plastic
overlay, MRF24J40 2.4 GHz transceiver and
ZENA™ wireless adapter.
More information is available at: www.microchip.com/security.
Connectivity Solutions
5
USB Connectivity Solutions
Scalable Integrated USB Solutions
The consumers’ desire for more engaging, easy-to-use and
upgradeable products is driving embedded designers to
add USB capabilities to their designs.
Microchip provides a scalable choice of integrated USB
solutions across 8-, 16- and 32-bit PIC microcontrollers
ranging from space-saving 14-pin devices to featurerich 144-pin USB On-the-Go (OTG) products. This allows
simple, compact designs to be easily expanded to offer
more capabilities as requirements demand.
In addition, Microchip offers highly configurable
standalone USB converters, hubs, transceivers, switches,
bridges, security controllers and microcontrollers ideal for
applications like digital audio, smartphones, Flash media
controllers, power delivery and charging, cameras, GPS,
gaming, medical devices, networking and set-top boxes.
Microchip provides free source code for USB software
stacks and class drivers to shorten development time for
USB applications, including thumb drive bootloaders and
printer support. Supported classes include audio, CDC,
HID, MSD, printer and custom. Microchip’s free USB host
stack, device stack and class drivers are available at:
www.microchip.com/usb.
PIC16F and PIC18F Family
■
■
■
■
■
■
Full-speed USB Device mode
8–128 KB Flash, 512B–4 KB of RAM,
Up to 16 MIPS 8-bit devices
Up to four UARTs, two I2C™/SPI ports
Available in 14 to 100-pin packages
Crystal-free options available
PIC24 Family
■
■
■
■
■
■
Full-speed USB Device, Host and OTG modes
32–512 KB Flash, 8–96 KB RAM
16 to 70 MIPS 16-bit devices
Up to four UARTs, three I2C and four SPI ports
DMA interface for data RAM access, display drivers
Available in 28/44/64/80/100/144-pin packages
PIC32MX Family
■ Full-speed USB Device, Host and OTG modes with
dedicated DMA Channels
■ 16–512 KB Flash, 4–128 KB RAM
■ 40, 50, 80 and 100 MHz MIPS® M4K® Core
■ 10/100 Ethernet MAC with MII/RMII interface and up
to two CAN 2.0B ports
■ Up to six UARTs, five I2C, four SPI ports,
two I2S™ and CTMU
■ Up to eight general purpose DMA channels
■ Available in 28/36/44/64/100/124-pin packages
www.microchip.com/usb
6
Connectivity Solutions
PIC32MZ Family
■ High-speed USB 2.0 Device, Host and OTG modes with
dedicated DMA Channels
■ 1–2 MB Flash, 512 KB RAM
■ 200 MHz microAptiv™ Core
■ 10/100 Ethernet MAC with MII/RMII interface and up
to two CAN 2.0B ports
■ Up to six UARTs, five I2C, six SPI/I2S ports
■ Up to eight general purpose DMA channels and up to
18 channels of dedicated DMA
■ External Bus Interface (EBI), Serial Quad Interface (SQI)
and Crypto Engine
■ Available in 64/100/124/144-pin packages
dsPIC33E Family
■ Full-speed USB Device, Host and OTG modes
■ 256–512 KB Flash, 32–52 KB RAM,
70 MIPS 16-bit devices
■ Four UARTs, two I2C and four SPI ports with motor
control and digital power peripherals
■ Available in 64/100/144-pin packages
Stand-alone USB Converters
■ MCP2200 (USB to UART) and MCP2210 (USB to SPI)
bridge devices allow for an easy and cost-effective
way to add USB to existing designs. These highlyconfigurable products support full-speed, on-board
EEPROM and up to nine GPIOs.
USB Connectivity Solutions
Stand-alone and Integrated USB Solutions from Low-Cost Devices to Complex SuperSpeed USB
USB technology can be found in practically all applications and markets—from consumer to industrial to automotive
segments. The extreme proliferation of USB has even led to the adoption of the technology as a high-bandwidth embedded
chip-to-chip interface. Microchip enables seamless USB connectivity by delivering integrated value-rich solutions such as
USB hub controllers, power delivery and charging, transceivers/switches, Flash media controllers and security solutions.
PLL
USB 2.0
PHY
USB 2.0/3.0
PHY
Controller
USB 2.0
Port 7
USB 2.0
Port 6
USB 2.0/3.0
PHY
USB 2.0/3.0
PHY
USB24XX/USB25XX/USB350X/USB380X/
USB3X13/USB553X Families
■■ USB-IF-compliant Hi-Speed USB 2.0 and SuperSpeed
USB 3.0 solutions
■■ Integrated controller providing integrated, easy-to-use
controller proividing flexible programmability
■■ Small, highly-integrated and low-power hub solutions
offered specifically for mobile applications
■■ Multi-port solutions with battery charger detection
■■ Unique system optimization features including
PHYBoost, VariSense™ and flexConnect
USB Security
RAM
AES
SD2
Flash Media
DMA Unit
USB
Power
Switch
UVLO,
OVLO
VBUS
Interface
Temp.
Control/
Measure
UCS100X Family
■■ Port power switch capable of supporting up to
2.5A for continuous current
■■ Up to nine preloaded charger emulation profiles with full
programmability to customize profiles
■■ Integrated current sensor to optimize charging
experience and algorithms
■■ Extremely low-power sleep mode
Note: UCS1002 may require an NDA.
USB Transceivers and Switches
Processor
USB
MAC/
SIE
Charger
Detection
ULPI
Transceiver
USB
Switch
Various levels on integration offered
USB
Accy
USB333X/USB334X/USB374X/USB375X Families
■■ ULPI-standard interface to transceivers
■■ Compliant Hi-Speed USB 2.0 switch
technology for USB port sharing
■■ Battery charger detection integrated
■■ Smallest package option available, ideal for
mobile applications
GPIO
SPI
USB Flash Media Controllers
SD1
SD1
SC
USB Port 1
SMART CARD
UART
MUX
Processor
USB 2.0 HS
ARM
Processor
USB 2.0 HS Data Switch
and Charger Emulator
SD2
Smart
Card
USB HS
Device
Controller
USB
SPI
USB Port 2
Processor
JTAG
USB 2.0/3.0
Hub
Controller
USB 3.0
Port 2
USB 2.0/3.0
PHY
USB 2.0/3.0
PHY
USB 3.0
Port 1
Processor
Embedded
8051 µC
USB 2.0
Port 5
USB 2.0
PHY
USB 3.0
Port 4
I2C™/SPI/GPIO
Controller
USB 3.0
Port 3
USB 2.0
PHY
Processor
USB Power Delivery and Battery Charging
I2C™/SPI/GPIO
Battery
Charger
USB Hub Controllers
SD/MMC/SDIO
USB/HSIC
3-Port
Hub
SD/MMC
MS
Memory
SEC11XX/SEC12XX/SEC24XX/SEC44XX Families
■■ Multiple standard smart card interfaces including
ISO/IEC7816
■■ Flexible host interfaces supported including USB,
SPI and UART
■■ Hardware-level key management and AES encryption
■■ Extremely fast, optimized and secure data transfers
with no firmware intervention
xD
USB22XX/USB26XX/USB46XX Families
■■ Secure Digital (SD™)/microSD™, Embedded MultiMediaCard
(eMMC™)/MultiMediaCard™ (MMC), Memory Stick®(MS)/
MS Pro™/MS Pro-HG™, xD-Picture Card™ (xD)
■■ Card speed technology for maximum data throughput
■■ Integrated USB hub ports for highest integration
■■ Flexible interfaces to processor including USB and HSIC
www.microchip.com/usb
Connectivity Solutions
7
USB Development Tools and Software Support
Supporting USB Development from Concept to Prototype
Microchip’s support for USB applications includes MPLAB® X Integrated Development Environment (IDE) tools for all
USB PIC MCUs, peripheral applications for the 8-bit PIC16F and PIC18F families, and device, embedded host and OTG
applications for the 16-bit PIC24F, PIC24E and dsPIC33E and 32-bit PIC32 families. Designers can use Microchip’s free
USB stacks—including class drivers, 16- and 32-bit file system drivers and SCSI interface drivers—which are provided in
source code form. More information is available at: www.microchip.com/usb.
Additional software support includes full C and RTOS development environments. Also available are TCP/IP stacks,
graphics libraries and ZigBee software stacks, which allow USB functionality to be combined with other capabilities to
support a variety of designs. More information is available at: www.microchip.com/mla. More information about USB
Software for PIC32 is available at: www.microchip.com/harmony.
USB Starter Kits
These development kits provide an easy, low-cost way to
evaluate the functionality of Microchip’s 8-, 16- and 32-bit
USB microcontrollers. Each all-inclusive kit contains the
hardware, software and code examples necessary to take
your next USB design from concept to prototype.
Low Pin Count USB Development Kit (DV164127-2)
This is a development kit for
PIC16F145X, PIC18F14K50 and
PIC18F13K50 14- and 20-pin
USB microcontrollers. Included
in the kit are PIC MCU samples,
code examples and all necessary
hardware and software.
PIC18 Starter Kit (DM180021)
This kit features a PIC18F46J50
MCU and includes on-board
debugger/programming capability
as well as USB communication, a
capacitive touch pad, potentiometer,
acceleration sensor, MicroSD
memory card and an OLED display. The board can function
as a USB mouse, joystick or mass storage device (thumb
drive) all using the on-board capacitive touch sense pads.
MPLAB Starter Kit for PIC24F (DM240011)
This kit provides an inexpensive
way to evaluate the 16 MIPs
PIC24FJ256GB110 with USB-OTG.
Application demonstrations include
mTouch capacitive sensing, driving an
OLED display and USB-OTG to store data to a thumb drive.
PIC32 USB Starter Kit II (DM320003-2)
This kit provides the easiest and
lowest-cost method to experience the
USB and CAN functionality of PIC32
microcontrollers. You can develop CAN
applications using PIC32 expansion
boards. The board contains everything you
need to develop USB embedded Host/
Device/OTG applications when combined with Microchip's
free USB software.
www.microchip.com/usb
8
Connectivity Solutions
MPLAB Starter Kit for PIC24F Intelligent Integrated
Analog (DM240015)
The MPLAB Starter Kit for PIC24F
Intelligent Integrated Analog is
a stand-alone board showcasing
the advantages of lower BOM
cost, faster throughput and lower
noise analog, and features an on-board programmer/
debugger. The board demonstrates these features of the
PIC24FJ128GC010 Microcontroller: direct LCD drive, 16-bit
Sigma-Delta ADC, 12-bit Pipeline ADC, 10-bit DAC, op
amps, CTMU, DMA, USB and XLP low power consumption.
PIC32 USB Starter Kit III (DM320003-3)
The PIC32 USB Starter Kit III provides you
with an easy and cost-effective option to
experience the USB, mTouch and SPI/
I2S functionality of PIC32MX3/MX4
microcontrollers. The board comes
equipped with everything that is needed to
develop USB embedded host/device/OTG
applications, including Microchip's free USB software.
Note: Additional PIC32 Starter Kits that support USB and
Ethernet are listed in the Ethernet Development Tools section.
FS USB Plug-In Module (PIM) Demo Boards
These full-speed USB demonstration and development
boards feature the PIC18FXXJ50 8-bit MCUs. The boards
can be operated either stand-alone or as a PIM plugged
into the PICDEM PIC18 Explorer board (DM183032).
PIC18F46J50 FS USB PIM Demo Board (MA180024)
PIC18F47J53 FS USB PIM Demo Board (MA180029)
The PIC18F46J50 and PIC18F47J53
FS USB PIM demo boards are
full-speed USB demonstration
and development boards
featuring the PIC18F46J50 and
PIC18F47J53 respectively.
PIC18F87J94 FS USB Demo Board (MA180033)
The PIC18F87J94 FS USB PIM demo
board is a full-speed USB demonstration
and development board featuring the
PIC18F87J94.
USB Development Tools and Software Support
Supporting USB Development from Concept to Prototype
Explorer 16 Development Platform
Combine the Explorer 16 low-cost modular development
board with the USB PICtail Plus daughter board for easy
USB development with 16- and 32-bit MCUs. Several
different PIMs are available to allow development with a
variety of MCU platforms.
Explorer 16 Development Board (DM240001)
Use this efficient, low-cost
development board to evaluate
the features and performance of
Microchip’s 16-bit PIC24F and
PIC24H MCU, dsPIC33 DSC and
32-bit PIC32MX families. Interface
with the MPLAB ICD 3 In-Circuit
Debugger or MPLAB REAL ICE™ In-Circuit Emulator to
speed evaluation and prototyping of application circuitry.
USB PICtail Plus Daughter Board (AC164131)
This module enables USB hardware
connectivity when using an Explorer 16 and
USB-capable PIM. It provides support for USB
Device, Host and OTG development.
Plug-In Modules
Various PIMs are available for use with the
Explorer 16 Development Board. Individual
PIMs feature different PIC24F, PIC24E and
PIC32 microcontrollers and dsPIC33E digital
signal controllers with USB modules.
USB Evaluation Boards
MCP2210 Evaluation Kit (ADM00421)
The MCP2210 Evaluation Kit is a
development and evaluation platform
for the MCP2210 USB-to-SPI
stand-alone device.
USB Hub Controller Evaluation Boards
USB3613/USB3813 Mobile Hi-Speed USB 2.0
Programmable 3-Port Controller Hub
(EVB-USB3613/EVB-USB3813)
The EVB-USB3613 and EVB-USB3813
are used to evaluate the USB31X13
family of programmable controller hubs
for mobile applications. The difference
between the USB3613 and the
USB3813 is the upstream port—USB3613 has an HSIC
interface, and the USB3813 has a USB interface. Both
versions are offered in an extremely small package.
USB4604 Hi-Speed USB 2.0 Programmable 4-Port
Controller Hub with FlexConnect and I/O Bridging
(EVB-USB4604)
The EVB-USB4604 is used to evaluate
the full-featured USB46X4 family of
programmable controller hubs. It features
full programmability and unique features
such as FlexConnect and I/O Bridging.
USB2534 Hi-Speed USB 2.0 Programmable 4-Port
Controller Hub (EVB-USB2534)
The EVB-USB2534 is used to evaluate
the USB253X family of programmable
controller hubs. This solution not only
provides the flexibility to optimize hub
functionality, but also integrates LPM
power savings and USB battery charger detection on all ports.
USB2514B Hi-Speed USB 2.0 Multi-TT 4-Port Hub
with Battery Charging Support (EVB-USB2514BC)
The USB2514B MultiTRAK™ Hub
Controller is a low-power, full-featured,
OEM-configurable Hi-Speed USB
2.0-compliant hub with four downstream
ports. Each of these downstream ports
in the USB2514B device is capable of supporting battery
charging per the USB Battery Charging Specification.
USB3503 HSIC to USB 2.0 3-Port Hub for Portable
Applications (EVB-USB3503)
The EVB-USB3503 is used to evaluate
our extremely small-size USB3503 hub
which is ideal for portable applications.
Many processors serving the mobile
market have adopted HSIC as a standard interface, and this
solution allows for both external USB 2.0 connectivity as
well as an embedded interface in mobile products.
USB3803 Hi-Speed USB 2.0 3-Port Hub for Portable
Applications (EVB-USB3803)
The EVB-USB3803 is used to evaluate
our extremely small-size USB3803 hub,
which is ideal for portable applications.
The USB3803 is similar to the USB3503
except that this device has a USB 2.0 upstream interface
instead of HSIC. Some system architects prefer to use USB
2.0 and this solution provides an adaptable equivalent.
USB553X SuperSpeed USB 3.0 7-Port Hub
Controller (EVB-USB5537)
The EVB-USB5537 is used to evaluate the
USB553X family of SuperSpeed USB 3.0
hub controllers. This solution is offered in
different port configurations and provides
some unique features such as PHYBoost and
VariSense to optimize USB system design. It also incorporates
battery charging detection on all downstream USB ports.
www.microchip.com/usb
Connectivity Solutions
9
USB Development Tools and Software Support
Supporting USB Development from Concept to Prototype
Power Delivery and Battery Charging
Evaluation Boards
USB Port Power Controller with Charger Emulation
(ADM00497)
The EVB-UCS1002 is used to evaluate
our UCS100X USB Port Power
Controller solutions. USB ports are
used for not only USB data, but also for
USB battery charging. The UCS100X
provides up to nine preloaded and one programmable charger
emulation profiles, an integrated current sensor and a power
switch. It it capable of up to 2.5A of continuous current.
Note: The UCS1002 may require an NDA.
Transceiver/Switch Evaluation Boards
USB3330 Hi-Speed USB 2.0 Transceiver with ULPI
Interface in Smallest Package (EVB-USB3330)
The EVB-USB3330 is used to evaluate our
USB333X family of small, highly-integrated
USB 2.0 transceivers with ULPI interface.
The small WLCSP package makes the
USB333X family an ideal solution for
mobile and portable applications. It features multi-frequency
reference clocks to adapt and share any common system
reference clocks, and includes key features like RapidCharge
Anywhere™, PHYBoost and VariSense for system optimization.
USB3340 Hi-Speed USB 2.0 Transceiver with ULPI
Interface (EVB-USB3340)
The EVB-USB3340 is used to evaluate our
USB334X family of highly integrated USB
2.0 transceivers with ULPI interface. The
features and functions are identical to
the USB333X family except the USB334X
comes in a convenient, widely-used 32-pin QFN package.
USB3740 Hi-Speed USB 2.0 2-Port Switch
(EVB-USB3740)
The EVB-USB3740 is used to evaluate our
USB3740 USB 2.0 compliant 2-port switch.
Some applications require a single USB
port to be shared with other functions. The
USB3740 is a small and simple 2-port switch
providing system design flexibility.
USB375X Hi-Speed USB 2.0 Port Protection with
Integrated Switch and Charger Detection (EVB-USB3750)
The EVB-USB3750 is used to evaluate
our USB375X family of Integrated
USB 2.0 Port Protection devices. The
USB375X integrates a high level of ESD
protection to the USB port, which is typically exposed to the
harsh environment of the outside world. It also incorporates
our Hi-Speed USB 2.0 switch as well as battery charger
detection, all in a conveniently small package.
www.microchip.com/usb
10
Connectivity Solutions
Flash Media Controller Evaluation Boards
USB2250 Ultra Fast Hi-Speed USB 2.0 Multi-Slot
Flash Media Controller Evaluation Board
(EVB-USB2250)
The EVB-USB2250 is used to
demonstrate the features of the
USB2250, a stand-alone Hi-Speed Mass
Storage Class Peripheral Controller
intended for reading and writing to
more than 24 popular Flash media formats from the
CompactFlash® (CF), SmartMedia™ (SM), xD-Picture
Card (xD), Memory Stick (MS), Secure Digital (SD) and
MultiMediaCard (MMC) families.
USB2640 USB 2.0 Port Hub with Ultra-Fast Flash
Media Controller Evaluation Board (EVB-USB2640)
The USB2640 is an Ultra-Fast USB
2.0 Hub, Flash media controller
and protocol bridge combo. The
EVB-USB2640 Evaluation Board
demonstrates a stand-alone application
for developers of applications such
as Flash media card reader/writer, printers, desktop and
mobile PCs, consumer A/V and flat panel displays.
USB4640 HSIC 1.0 to USB 2.0 2-Port Hub with
Ultra-Fast Flash Media Controller Evaluation Board
(EVB-USB4640)
The EVB-USB4640 Evaluation Board is
for the USB4640 Hi-Speed HSIC USB hub
and card reader combo solution. It has
an upstream port compliant to HSIC 1.0
using dual UFL connectors, a supplement
to the USB 2.0 specification.
Security Evaluation Boards
Smart Card Controllers with Flexible Interface
Support (EVB-SEC1210)
The EVB-SEC1210 is used to evaluate
our SEC11XX/SEC12XX family of security
products. These solutions' flexible host
interface options include USB, SPI or UART
and provide either single or dual smart card
interfaces to ISO/IEC7816 specifications.
Hi-Speed USB 2.0 Flash Media Controller with AEC
Encryption and Integrated Smart Card Reader
(EVB-SEC2410-SSD)
The EVB-SEC2410-SSD is used to
evaluate our SEC24XX/SEC44XX
family of Flash Media Controller
Security products. Hardware-level key management and
AES encryption, as well as the high-performance hardware
controller-Flash media data transfers—which require no
firmware intervention—are fundamental features of these
solutions.
Ethernet Connectivity Solutions
Complete Portfolio of Ethernet Products for Flexibility of Design
A wide range of remote communication features are possible when Ethernet connectivity is added to embedded designs.
For example, systems can be remotely monitored using a web browser or an email notification can be sent, triggered by
service alerts or low product inventory. End users benefit from cost and time savings since they can centrally monitor,
control and service their embedded systems over the Internet instead of being physically present.
The Microchip Ethernet portfolio includes 10/100 Mbps and 10/100/1000 Mbps transceivers as well as 2- and 3port switches and integrated Ethernet controllers. These Ethernet products include enhanced features such as Energy
Efficient Ethernet (IEEE 802.3az), Wake-on-LAN and cable diagnostics to bring high-performance connectivity to all your
embedded designs.
Microchip’s Ethernet solutions address the growing demand for embedded Ethernet products, enabling easy network
connectivity for cost-sensitive embedded designs.
■■ Free and robust TCP/IP stack optimized for the PIC18, PIC24 and PIC32 microcontroller and dsPIC® digital signal
controller families
■■ Supported protocols include HTTP, SMTP, SNMP, FTP, SNTP, SSL, TCP, UDP, IP, DHCP, DDNS, ICMP and ARP
PIC18F97J60 Ethernet PIC Microcontroller
■■ PIC18F microcontroller with built-in Ethernet MAC
and 10Base-T PHY
■■ 8 KB dedicated Ethernet Buffer RAM
■■ Up to 128 KB Flash
■■ Advanced analog and communication peripherals
■■ Available in 64-, 80- and 100-pin TQFP packages
PIC32MZ Embedded Connectivity PIC
Microcontrollers
• 200 MHz, 5-Stage Pipeline
• 32-bit CPU + DSP
Trace
PIC32MX6XX, PIC32MX7XX Ethernet
PIC Microcontrollers
EJTAG
JTAG
32-bit
HW
Mul/Div
Instruction
RMII/MII
32 Core
Registers
USB
OTG
CAN 2.0b
C
(2)
10/100
10
0/100
Eth
hernet
Ethernet
M
MAC
2 Ch. DMA
4 Ch. DMA
2 Ch. DMA
DMA
8 Ch.
Shadow Set
S
Data
Prefetch
Buffer
Buff
f er
C h
Cache
5112 KB
512
K
Flash
Flas
F
128 KB
SRAM
Interrupt
nterrupt
ontroller
Controller
28 Ch.
10-bit
ADC
Analog
Comparators
(3)
Input
Capture
(5)
I2C™
(5)
Output
Compare
PWM (5)
UART
(6)
16-bit
Timers
(5)
I2S/SPI
(4)
SQI
High
Hig
Spee
Speed
USB
B
CAN
2.0b
(2)
Ethernet
MAC
2 Ch.
DMA
2 Ch.
Ch
h.
DMA
DM
MA
8 Ch.
Ch
h
DMA
DM
MA
A
4 Ch.
DMA
2 Ch.
DMA
2 MB Flash
Dual Panel
Live Update
5122 KB
B
SR
RAM
SRAM
PPS
P
PS
PMP
EBI
EB
BI
Comparator
(2)
10-b
10-bit
ADC
4-Wire
4-W
Wire
Debug
Deb
Peripheral Buses
POR
Reset
Output
Compare
PWM (9)
Timer
(9)
IC
(9)
I2C™
(5)
I2S/SP
S/SPI
(6)
RTCC
RT
2-Wire
Debug
VREG
Peripheral Bus
16-bit
Parallel
Port
Prefetch
BOR
BO
Reset
GP
GPIO
PIO
(885)
(85)
Crypto
g
Engine
High-Speed Bus Matrix
WDT
Bus Matrix
D
DMA
8 Ch.
Data
®
• 100 MHz,, 1.65 DMIPS/MHz
• 5 Stage Pipeline
Pipeline, 32-bit ALU
Trace
Data
D
Ca
ache
Cache
Inst.
In
n
nst.
Ca
ache
Cache
Instruction
Instr
ctio
on
M4K 32-bit Core
®
MIPS32 microAptiv™ Core
CTMU/
Temp
Sense
RTCC
■■ Integrated 10/100 Mbit Ethernet MAC
■■ Dedicated DMA interface for direct access to the entire
system RAM
■■ Industry-standard RMII/MII interface to PHY
■■ Pre-programmed MAC address
■■ 80 MHz, up to 512 KB Flash, up to 128 KB RAM
■■ Available in 64-pin (TQFP, QFN) and
100-pin (TQFP, BGA) packages
■■ Integrated 10/100 Mbps Ethernet MAC
■■ Dedicated DMA interface for direct access to the entire
system RAM
■■ Industry-standard RMII/MII interface to PHY
■■ Pre-programmed MAC address
■■ High-speed USB, CAN 2.0B, Crypto Engine,
SQI and EBI ports
■■ 200 MHz, 1–2 MB Flash and 512 KB RAM
■■ Available in 64-pin (TQFP, QFN), 100-pin (TQFP),
124-pin (VTLA) and 144-pin (TQFP, LQFP) packages
www.microchip.com/ethernet
Connectivity Solutions
11
Ethernet Connectivity Solutions
Complete Portfolio of Ethernet Products for Flexibility of Design
ENC624J600, ENC424J600 Embedded
Ethernet Controllers
ENC28J60 Embedded Ethernet Controller
ENC624J600
SPI/Parallel
Interface
dsPIC
DSC
®
10/100 Mbps
Ethernet
TX/RX
Buffer
MAC
www.microchip.com/ethernet
Connectivity Solutions
TX/RX
Buffer
MAC
PHY
PHY
■■ Integrated MAC and 10/100Base-T PHY
■■ 24 KB transmit/receive buffer SRAM
■■ MCU Interface supported: SPI and 8/16-bit parallel
■■ Cryptographic Security Engines
■■ Pre-programmed unique MAC address
■■ Available in 44-pin (TQFP, QFN) and
64-pin (TQFP) packages
12
SPI
Security
Engines
PIC18
PIC24
PIC32
MCU
10 Mbps
Ethernet
ENC28J60
■■ Integrated MAC and 10Base-T PHY
■■ 8 KB transmit/receive buffer SRAM
■■ MCU Interface Supported: SPI
■■ Available in 28-pin SPDIP, SSOP, SOIC and QFN
packages
MAC Address Chips
■■ Pre-programmed EUI-48™
and EUI-64™ node address
■■ Up to 1.5 Kb Serial EEPROM
functionality
SPI: 25AA02E48
I2C: 24AA02E48
UNI/O®: 11AA02E48
www.microchip.com/MAC
Ethernet Connectivity Solutions
Complete Portfolio of Ethernet Products for Flexibility of Design
Ethernet devices have become ubiquitous in communications and networking products servicing a wide variety of
applications across multiple market segments. This well-understood technology provides a robust link to ensure
reliable communication between devices in a network. Microchip has a broad portfolio of reliable, high-quality, and highperformance Ethernet solutions. From Ethernet switches, controllers, bridges and PHYs to a variety of standard interfaces
serving consumer, industrial and automotive applications, Microchip can provide a solution to address your varied
application needs and offers you the support needed to reduce your time-to-market.
USB
2.0
Processor
Magnetics
Ethernet
Ethernet
Ethernet
10/100
PHY
10/100 Ethernet
MAC
10/100
PHY
JTAG
USB 2.0
Device
Controller
FIFO
Controller
10/100/1000
Ethernet
MAC
10/100/1000
Ethernet
PHY
Ethernet
TAP
Controller
SRAM
EEPROM
Controller
EEPROM
Ethernet
EEPROM
(Optional)
EEPROM
Controller
PLL
USB 2.0
PHY
Processor
Ethernet
Magnetics
MII/Turbo MII
Magnetics
Ethernet Bridges (USB to Ethernet)
External
EEPROM
Ethernet Switches
LAN7500 and LAN95XX/97XX Families
25 MHz Crystal
LAN93XX Family
■■ H
igh-performance, full-featured 3-port switches with
per-port 802.1Q VLAN support (up to 16 VLAN groups)
■■ Excellent ESD protection (+-8 kV/15 kV) per port
■■ IGMP v1/v2 monitoring for multicast packet filtering
■■ Up to 200 Mbps network speed via Turbo MII interface
■■ Virtual PHY feature simplifies software development by
mimicking multiple switch ports as a single port PHY
Ethernet PHYs
Ethernet Controllers
I/F
25 MHz Crystal
PLL
EEPROM
Controller
Host Bus
Interface
(HBI)
10/100
Ethernet
MAC
10/100
Ethernet
PHY
PLL
Ethernet
Processor
Power
Management
I/F
Interface
Transmitter
HP
Auto-MDIX
Ethernet
Magnetics
EEPROM
(Optional)
Magnetics
Processor
25 MHz
■■ USB 2.0 to 10/100 and 10/100/1000 Ethernet products
■■ Flexible interfaces supported (USB 2.0, HSIC)
■■ Integrated USB, Ethernet MAC and PHY for lowest BOM
cost and size
■■ Multi-port support for USB port expansion
■■ Supports numerous power management features including
Wake-on-LAN, Magic Packet™, and Link Status Change
■■ Software compatibility – transparent to USB software
stack and device drivers
Ethernet
Receiver
Ethernet
LAN92XX/LAN94XX and ENC Families
■■ Single-chip Ethernet controllers with integrated MAC and PHY
■■ Flexible interfaces supported (16/32-bit local bus, PCI,
MII, high speed SPI, parallel)
■■ Efficient architecture to minimize CPU overhead
■■ Integrated checksum offload engine
■■ Conforms with 802.3/802.3u industry standards
■■ HP Auto-MDIX support
LAN87XX and LAN88XX Families
■■ 10/100 and 10/100/1000 tranceivers with support for
all industry-standard interfaces (MII, RMII, GMII, RGMII)
■■ Comprehensive flexPWR® technology to provide flexible
options to minimize power consumption
■■ Energy Efficient Ethernet (802.3az) support
■■ Deterministic latency to provide the most reliable and
predictable link
■■ Wake-on-LAN support
www.microchip.com/ethernet
Connectivity Solutions
13
Ethernet Development Tools
Supporting Ethernet Development from Concept to Prototype
Development Tools Support
PICDEM.net 2 Development Board (DM163024)
This Ethernet development board
supports both the ENC28J60 controller
and the PIC18F97J60 MCU. With this
board and Microchip’s free TCP/IP
stack, a web server can be developed
showcasing the capability to remotely
monitor and control embedded applications over the Internet.
PIC32 Ethernet Starter Kit II (DM320004-2)
This board provides the easiest and
lowest-cost method to experience
10/100 Ethernet development with
PIC32 microcontrollers. Combined
with Microchip’s free TCP/IP software,
this kit gets your project running
quickly. It features a socket that can accommodate
10/100 Ethernet transceiver (RJ-45) PHY Daughter Boards
for prototyping and development.
Fast 100 Mbps Ethernet PICtail Plus Daughter
Board (AC164132)
Populated with the ENC624J600,
this Ethernet board interfaces to the
RJ-45 connector. It can be plugged
into the Explorer 16 Development
Board (DM240001) and the PIC18
Explorer Board (DM183032) allowing
connection to any of Microchip’s
8-, 16- and 32-bit products.
Ethernet PICtail Plus Daughter Board (AC164123)
This board is populated with the
28-pin ENC28J60 Ethernet controller
which interfaces to the RJ-45
connector. It can be plugged into
the Explorer 16 Development Board
(DM240001), allowing connection to
any of Microchip’s 16- and 32-bit products when used in
conjunction with the free Microchip TCP/IP stack.
www.microchip.com/ethernet
14
Connectivity Solutions
PIC32MZ Embedded Connectivity Starter Kit
(DM320006)
This board provides the easiest and
lowest-cost method to experience
the high performance and advanced
peripherals integrated in the PIC32MZ
Embedded Connectivity MCUs. This
starter kit features a socket that can
accommodate 10/100 Ethernet transceiver (RJ-45) PHY
Daughter Boards for prototyping and development.
PIC32MZ Embedded Connectivity Starter Kit with
Crypto Engine (DM320006-C)
This board provides the easiest and
lowest-cost method to experience
the high performance and advanced
peripherals integrated in the PIC32MZ
Embedded Connectivity MCUs. It
features the PIC32MZ2048ECM144
with on-board crypto engine for encryption, decryption, and
authentication and has a socket that can accommodate
10/100 Ethernet transceiver (RJ-45) PHY Daughter Boards
for prototyping and development.
LAN8720A PHY Daughter Board (AC320004-3)
The LAN8720A PHY Daughter Board is
populated with the high-performance,
small-footprint, low-power 10BaseT/100Base-TX Ethernet LAN8720A PHY. It
is designed for easy development of RMII
Ethernet control applications when plugged
into the PIC32-compatible starter kits listed below:
■ PIC32MZ Embedded Connectivity Starter Kit
(DM320006)
■ PIC32MZ Embedded Connectivity Starter Kit with Crypto
Engine (DM320006-C)
■ PIC32 Ethernet Starter Kit II (DM320004-2)
Ethernet Development Tools
Supporting Ethernet Development from Concept to Prototype
Ethernet Controller Evaluation Boards
Ethernet Bridge Evaluation Boards
LAN921X High-Performance 10/100 Ethernet
Controller (EVB-LAN9218I-MINI)
LAN9500A Hi-Speed USB 2.0 to 10/100 Ethernet
Bridge Controller
(EVB-LAN9500A-MII/EVB-LAN9500A-LC)
The EVB-LAN9218I-MINI is used to evaluate
our LAN921X family of high performance
10/100 Ethernet Controllers. These devices
are designed to provide optimal performance
and minimized CPU overhead. This evaluation
board comes with our LAN9218 which has a
full 32-bit interface.
LAN922X High Performance 10/100 Ethernet
Controller with Variable Voltage I/O
(EVB-LAN9221-MINI)
The EVB-LAN9221-MINI is used to evaluate
our LAN922X family of high-performance
10/100 Ethernet Controllers. Similar to the
LAN921X family, this solution features a
high-performance architecture and minimizes
CPU overhead, but also provides a variable voltage I/O
feature which allows it to interface with processors
requiring a lower I/O voltage.
Ethernet Switches Evaluation Boards
LAN9303/LAN9303M 10/100 Managed 3-Port
Ethernet Switch (EVB9303/EVB9303M)
The EVB9303/EVB9303M is used to
evaluate our LAN9303 or LAN9303M
solutions. Both products are 10/100
3-Port Managed Ethernet Switches
which support MII/RMII/Turbo MII
interfaces. The solutions can be
adapted to support different system architectures.
LAN931X 10/100 3-Port Ethernet Switch with
Flexible interfaces (EVB-LAN9313M)
The EVB-LAN9313M is used to
evaluate our LAN931X family of
10/100 3-Port Ethernet Switches
which support various host
interfaces. The solutions can
be adapted to support different
system architectures.
The EVB-LAN9500A-MII is used to
evaluate our LAN9500A Hi-Speed USB
2.0 to Fast Ethernet Bridge Controller
solution. Using an existing USB port
with our LAN9500A allows you to add
Ethernet connectivity to your system architecture.
LAN7500 Hi-Speed USB 2.0 to Gigabit Ethernet
Bridge Controller (EVB-LAN7500)
The EVB-LAN7500 is used to evaluate our
LAN7500 Hi-Speed USB 2.0 to Gigabit Ethernet
Bridge Controller solution. If your system
architecture requires Ethernet connectivity,
you can use an existing USB port with our
LAN7500 to achieve this requirement.
A USB dongle version is also available
(EVB-LAN7500-LC).
LAN9512/LAN9514 Hi-Speed USB 2.0 to 10/100
Ethernet Hub Customer Evaluation Board (EVB9514)
The EVB9514 is an evaluation board
that utilizes the LAN9514 to provide a
4-port USB 2.0 hub with an integrated
10/100 Ethernet controller. The
EVB9514 provides USB connectivity
via one type B upstream USB
connector and four type A downstream USB connectors.
The EVB9512 is also available for evaluation of the
LAN9512.
LAN9730 Hi-Speed USB 2.0 HSIC to 10/100
Ethernet Bridge Controller (EVB-LAN9730-MII)
The EVB-LAN9730-MII is used to
evaluate our LAN9730 Hi-Speed USB
2.0 HSIC-interface to Fast Ethernet
Bridge Controller solution. Some
system architects prefer to use their
HSIC ports to reduce power consumption. The LAN9730
adds Ethernet functionality via the HSIC port.
www.microchip.com/ethernet
Connectivity Solutions
15
Ethernet Development Tools
Supporting Ethernet Development from Concept to Prototype
Ethernet Transceiver/PHY Evaluation Boards
Third Party Development Tools
LAN874X 10/100 Ethernet Transceiver with EEE
and Wake-On-LAN (EVB8740)
WIZnet W5200 Ethernet PICtail Board (TWIZ5200)
The EVB8740 is a PHY evaluation
board for our LAN874X family which
integrates Energy Efficient Ethernet
(EEE) and Wake-on-LAN features.
It interfaces to a MAC controller via a standard MII or
RMII interface.
WIZnet's W5200 Ethernet PICtail Plus
Board provides 10/100 Mbps, half/
full duplex Ethernet connectivity via
the on-board WIZnet W5200 Ethernet
controller, which has a hardwired TCP/
IP processing engine. It works with Explorer 16, PIC32 I/O
Expansion Board, PICDEM.net 2, PIC18 Explorer and other
development boards. It supports both Microchip's software
TCP/IP Stack and WIZnet's hardwired TCP/IP Stack on
PIC18, PIC24, PIC32 MCU and dsPIC DSC platforms.
Serial Gateway to Ethernet P801 (10/100Base-T)
(TIPL801)
The IPACK P-801 Gateway from IPLogika
is a powerful Serial-to-Ethernet gateway
that adds quick, effortless and full
10/100Base-T Ethernet connectivity
to client applications. It has all the
necessary physical and logical levels
for Ethernet connections, making integration with the host
computer very convenient and easy.
www.microchip.com/ethernet
16
Connectivity Solutions
LIN Bus Solutions
Scalability and Integration for the Low-Cost Communications Network
Local Interconnect Network (LIN)
LIN/J2602 is a communication standard designed to
address low-cost networking within vehicles. LIN enables
a cost-effective communication network for lower-speed
switch, smart sensor and actuator applications within
the vehicle where the bandwidth and versatility of CAN
is not required. LIN can be implemented on any PIC
microcontroller (MCU) with a UART or USART interface.
Microchip also offers a robust physical layer interface,
data link layer implementation, LIN-compliant drivers and a
variety of development resources.
Stand-alone LIN Transceivers
The MCP2003/4(A) family offers stand-alone LIN
transceiver options. Both parts meet LIN bus specification
versions 1.3, 2.0 and 2.1 and SAE J2602. The
transceivers' EMC/ESD performance is among the best in
the industry and meets all automotive requirements. The
MCP2003A is available in an industry-standard 8-pin SOIC
package. The MCP2004A offers a TXE/Fault pin which
allows you to disable the transmitter and provides data
related to a fault condition.
LIN Transceivers with Integrated Voltage Regulator
The MCP2021A/2A and MCP2025 integrate a LIN
transceiver and a 3.3V or 5V internal voltage regulator with
a maximum output current of 70 mA. The devices support
the LIN bus specification versions 1.3, 2.0 and 2.1
and SAE J2602 and are designed to meet the stringent
EMC/ESD requirements of the world’s auto makers.
Microchip also offers the MCP2050 LIN Transceiver with
Voltage regulator, windowed watchdog timer and ratio
metric VBAT pin that allows for monitoring battery levels
using a MCU A/D converter.
Integrated Microcontroller with LIN Transceiver and
Voltage Regulator
The PIC16F1829LIN is a small-footprint MCU + VREG + LIN
Transceiver in a single package. Combining the flexible
PIC16F1829 microcontroller with the powerful MCP2021A
LIN transceiver enables a complete solution for LIN nodes
and endpoints, compatible with LIN Specification versions
1.3, 2.0, 2.1, and SAEJ2602.
LIN Software Library
LIN Data Link Layer firmware can be downloaded
free-of-charge from Microchip’s web site. Many thirdparty companies also offer LIN Data Link Layer firmware,
providing additional design options.
LIN Bus
LIN Transceiver
LIN Transceiver
with Integrated VREG
Integrated MCU with
LIN Transceiver-VREG
MCU
High Integration
MCU
Voltage Regulator
VREG
Medium Integration
Low Integration
LIN Development Tools
LIN Serial Analyzer Development System (APGDT001)
The LIN Analyzer Development
Tool enables a PC to communicate
with the LIN bus. The PC program
uses a graphical user interface to
enter and display message frames
occurring on the target bus, allowing
for easy debug. It can also be used
as an active node on a bus to send and receive messages,
therefore reducing the application development time.
CAN/LIN PICtail Plus Daughter Board (AC164130-2)
This daughter board can be used with
the Explorer 16 Development Board and
various PIMs featuring 16- and 32-bit
MCUs with CAN peripherals, or the PIC18
Explorer Board with the PIC18F66K80
PIM to facilitate rapid implementation and evaluation of
CAN and LIN applications.
PICkit 28-pin LIN Demonstration Board (DM164130-3)
The PICkit 28-pin LIN Demonstration Board
enables a quick start in developing and
debugging applications with the LIN drivers.
The kit includes a 28-pin socket which
supports various PIC16F devices, a LIN
transceiver plus a generous prototype area
with various indicator LEDs and buttons to
support testing and debuging of an application.
PICDEM CAN-LIN 3 Demonstration Board (DM163015)
The PICDEM CAN-LIN 3 Demonstration
Board provides an easy way to discover the
power of Microchip’s CAN and LIN products.
The board demonstrates the main features
of the 64-pin TQFP PIC18F6680 and 80-pin
TQFP PIC18F8680 devices, including those features of the
integrated CAN module. In addition, the board employs a LIN
sub-network using Microchip's 20-pin SSOP PIC18F1320 and
MCP201 LIN Bus.
www.microchip.com/lin
Connectivity Solutions
17
CAN Bus Solutions
Taking Communication and Connectivity in Deeply-Embedded Designs to the Next Level
Controller Area Network (CAN)
CAN is a serial communication protocol used extensively
for high-speed embedded applications where noise
immunity and robustness is necessary. The CAN protocol
supports speeds up to 1 Mbps and is highly fault-tolerant,
making it ideal for safety-critical applications.
Microchip offers a complete line of products to meet
the needs of high-performance embedded applications
using the CAN protocol, including 8-, 16- and 32-bit
microcontrollers and 16-bit digital signal controllers
with integrated CAN, stand-alone CAN controllers, I/O
expanders and CAN transceivers.
CAN MCUs and DSCs
The 8-bit PIC18F66K80 family offers the industry's best
Sleep current of less than 20 nA, a wide operating voltage
range of 1.8 to 5.5V and an advanced touch sensing
interface. The 16-bit PIC24 and dsPIC33 families offer
higher-density Flash memories and high-temperature
operation of up to 150°C ambient. The 32-bit PIC32 family
offers higher performance and better peripheral integration
like Ethernet and USB.
At the heart of Microchip’s CAN offering is the enhanced
CAN module offered on many Microchip microcontrollers.
Key features include:
■ CAN 1.2, CAN 2.0A and CAN 2.0B support
■ 32 buffers for TX/RX
■ 32 acceptance filters
■ Four acceptance mask filters
■ Time stamping
■ DMA support in 16-bit PIC24H and PIC32
microcontrollers and dsPIC33F digital signal controllers
■ DeviceNet™ support
■ Legacy mode
Stand-alone CAN Controller
Microchip Technology’s MCP2515 is a stand-alone
Controller Area Network (CAN) controller that implements
the CAN specification, version 2.0B. It is capable of
transmitting and receiving both standard and extended
data and remote frames. The MCP2515 interfaces with
MCUs via an industry-standard Serial Peripheral Interface
(SPI) and can be used as an easy method to implement
CAN in an existing system.
CAN Transceivers
The MCP2561/2 are high-speed CAN transceivers that
serve as an interface between a CAN controller and the
physical bus. The MCP2561 is a SPLIT Option for common
mode stabilization and the MCP2562 is a VIO Option for
digital I/O level shifting from 1.8V to 5.5V. Both parts
meet ISO and CAN specifications in addition to global
automotive EMC hardware requirements.
www.microchip.com/can
18
Connectivity Solutions
CAN Bus
CAN Transceiver
CAN Transceiver
CAN Controller
MCU with Integrated
CAN Controller
CAN MCU
Integrated
CAN Controller
Discrete
CAN Controller
CAN Development Tools
CAN Bus Analyzer (APGDT002)
The CAN Bus Analyzer development
tool enables a PC to communicate
with the CAN bus. The PC program
uses a graphical user interface to
enter and display message frames occurring on the target
bus, allowing for easy debuging. It can also be used as
an active node on a bus to send and receive messages,
reducing the application development time.
CAN/LIN PICtail Plus Daughter Board (AC164130-2)
This daughter board can be used with
the Explorer 16 Development Board and
various PIMs featuring 16- and 32-bit
MCUs with CAN peripherals, or the PIC18
Explorer Board with the PIC18F66K80
PIM to facilitate rapid implementation and evaluation of
CAN and LIN applications.
PICDEM CAN-LIN 3 Demonstration Board (DM163015)
The PICDEM CAN-LIN 3 Demonstration
Board provides an easy way to discover the
power of Microchip’s CAN and LIN products.
The board demonstrates the main features
of the 64-pin TQFP PIC18F6680 and 80-pin
TQFP PIC18F8680 devices, including those features of the
integrated CAN module. In addition, the board employs a LIN
sub-network using Microchip's 20-pin SSOP PIC18F1320 and
MCP201 LIN Bus.
Additional Connectivity Protocols
Providing Comprehensive System Solutions
Other Connectivity Options
While the most sophisticated protocols and interfaces
tend to garner a significant amount of attention, a number
of simpler connectivity options are and will remain the
embedded interconnects of choice for designer of many
deeply-embedded applications. Microchip’s focus on the
embedded market ensures an ongoing commitment to
support all of the connectivity solutions utilized by leading
designers including the microcontroller peripherals,
application notes and software necessary to implement
robust, highly-reliable embedded networks.
RS-485 Protocol
The RS-485 protocol is typically used as a more
feature-rich alternative to RS-232. The protocol enables
longer distance between nodes and higher data rates. Any
PIC microcontroller with an on-board UART can support
RS-485 communication. Many PIC microcontrollers include
enhanced peripherals with an RS-485 mode.
IrDA PICtail Plus Daughter Board (AC164124)
IrDA® Protocol
MCP2140 Wireless Temperature Sensor
Demonstration Board (MCP2140DM-TMPSNS)
The IrDA protocol provides many portable devices with an
affordable, short distance optical data communications
link. IrDA can be implemented on many Microchip MCUs
using Microchip's free-of-charge IrDA software stack. In
addition, Microchip offers UART to IrDA protocol converter
products (MCP2140A, MCP2150) to enable any system to
easily add IrDA wireless connectivity.
Thie daughter board enables IrDA
connectivity when used with the Explorer 16
Development Board (DM240001).
This board demonstrates the communication
of temperature data to a primary device
(PDA or PC with IR port) via IrDA.
Machine-to-Machine (M2M) PICtail Daughter Board
(AC320011)
The Machine-to-Machine (M2M) PICtail
Daughter Board, which is based upon
u-blox GPS and GSM/GPRS modules,
makes it easy to create low-cost M2M
applications with location awareness
capabilities. The daughter board can be
interfaced with Microchip's Multimedia Expansion Board
and a PIC32 Starter Kit to provide you with a turnkey
platform to get started with apps such as texting, email
and GPS.
www.microchip.com/connectivity
Connectivity Solutions
19
Support
Training
Microchip is committed to supporting its customers
in developing products faster and more efficiently. We
maintain a worldwide network of field applications
engineers and technical support ready to provide product
and system assistance. In addition, the following service
areas are available at www.microchip.com:
■ Support link provides a way to get questions
answered fast: http://support.microchip.com
■ Sample link offers evaluation samples of any
Microchip device: http://sample.microchip.com
■ Forum link provides access to knowledge base and
peer help: http://forum.microchip.com
■ Buy link provides locations of Microchip Sales Channel
Partners: www.microchip.com/sales
If additional training interests you, then Microchip can
help. We continue to expand our technical training options,
offering a growing list of courses and in-depth curriculum
locally, as well as significant online resources – whenever
you want to use them.
■ Technical Training Centers and Other Resources:
www.microchip.com/training
■ MASTERs Conferences: www.microchip.com/masters
■ Worldwide Seminars: www.microchip.com/seminars
■ eLearning: www.microchip.com/webseminars
Sales Office Listing
AMERICAS
Atlanta
Tel: 678-957-9614
Austin
Tel: 512-257-3370
Boston
Tel: 774-760-0087
Chandler
Tel: 480-792-7200
Chicago
Tel: 630-285-0071
Cleveland
Tel: 216-447-0464
Dallas
Tel: 972-818-7423
Detroit
Tel: 248-538-2250
Houston
Tel: 281-894-5983
Indianapolis
Tel: 317-773-8323
Los Angeles
Tel: 949-462-9523
New York
Tel: 631-435-6000
San Jose
Tel: 408-735-9110
Toronto
Tel: 905-673-0699
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Denmark - Copenhagen
Tel: 45-4450-2828
France - Paris
Tel: 33-1-69-53-63-20
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Munich
Tel: 49-89-627-144-0
Germany - Pforzheim
Tel: 49-7231-424750
Italy - Milan
Tel: 39-0331-742611
Italy - Venice
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Poland - Warsaw
Tel: 48-22-3325737
Spain - Madrid
Tel: 34-91-708-08-90
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
ASIA/PACIFIC
Australia - Sydney
Tel: 61-2-9868-6733
China - Beijing
Tel: 86-10-8569-7000
China - Chengdu
Tel: 86-28-8665-5511
China - Chongqing
Tel: 86-23-8980-9588
China - Hangzhou
Tel: 86-571-87928115
China - Hong Kong SAR
Tel: 852-2943-5100
China - Nanjing
Tel: 86-25-8473-2460
China - Qingdao
Tel: 86-532-8502-7355
China - Shanghai
Tel: 86-21-5407-5533
China - Shenyang
Tel: 86-24-2334-2829
China - Shenzhen
Tel: 86-755-8864-2200
China - Wuhan
Tel: 86-27-5980-5300
China - Xiamen
Tel: 86-592-2388138
China - Xian
Tel: 86-29-8833-7252
China - Zhuhai
Tel: 86-756-3210040
ASIA/PACIFIC
India - Bangalore
Tel: 91-80-3090-4444
India - New Delhi
Tel: 91-11-4160-8631
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Japan - Tokyo
Tel: 81-3-6880-3770
Korea - Daegu
Tel: 82-53-744-4301
Korea - Seoul
Tel: 82-2-554-7200
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Malaysia - Penang
Tel: 60-4-227-8870
Philippines - Manila
Tel: 63-2-634-9065
Singapore
Tel: 65-6334-8870
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Taiwan - Taipei
Tel: 886-2-2508-8600
Thailand - Bangkok
Tel: 66-2-694-1351
3/12/14
www.microchip.com
Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, MPLAB, mTouch, PIC and UNI/O are
registered trademarks and MiWi, MultiTRAK, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, VariSense and ZENA are trademarks
of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of
their respective companies. © 2014, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 6/14
DS00001181L
Microchip Technology Inc.
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising