GV-Weigand Capture
GV-Wiegand Capture is a box device that can integrate your current Wiegand access control system into DVR systems manufactured
by GeoVision. Through the GV-Wiegand Capture, the photo identification and text data from the access control can be easily
combined on the video data from DVR. The GV-Wiegand Capture is ideal for access control, time and attendance, or authorized
access management where video data is required. The security can use the higher security level of the combined video data for live
monitoring during busy hours, and for recording during off-peak hours.
SPECIFICATIONS
Communication
Input
Output
Wiegand
RS-232
DB9 Female
RS-485
Terminal Block
Input
2
Input Signal
12V Voltage input / dry-connect input
High State
9~12V / close
Low State
0V / open
Relay Output
2
Relay Status
Normal Open
Relay Capacitance
3A / V AC125V, 1.5A / V AC250V
Relay ON Time
4ms
Relay OFF Time
4ms
Input Connector
12V, D0, D1, GND
Output Connector
12V, D0, D1, GND
Format
Wiegand 26 Bits~40 Bits
DC IN
Environmental
Conditions
Dimensions (W x H x D)
DC 12V, 1A
Operation Temperature
Humidity
0~55°C / 32~104°F
5%~95% (non-condensing)
120 x 68 x 26 mm / 4.72 x 2.68 x 1.02 in
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement