Sharp XL-MP45H Specifications

Sharp XL-MP45H Specifications
MIKRO KOMPONENTEN SYSTEM
MICRO-CHAÎNE
SISTEMA MICRO
MIKRO KOMPONENT SYSTEM
MICRO SISTEMI
MICRO SYSTEEM
SISTEMA DE MICRO COMPONENTE
MICRO COMPONENT SYSTEM
MODELL
MODÈLE
MODELO
MODELL
Mikro Komponenten System XL-MP45H besteht aus XL-MP45H (Hauptgerät)
und CP-XL45H (Lautsprechersystem).
Micro-chaîne XL-MP45H composée de XL-MP45H (appareil principal) et CPXL45H (enceinte acoustique).
Sistema micro XL-MP45H que consta de XL-MP45H (aparato principal) y CPXL45H (sistema de altavoces).
XL-MP45H mikro komponent system bestående av XL-MP45H (huvudenhet)
och CP-XL45H (högtalarsystem).
Micro sistemi XL-MP45H composto da XL-MP45H (apparecchio principale) e
CP-XL45H (sistema di diffusori).
XL-MP45H micro systeem bestaande uit XL-MP45H (hoofdtoestel) en CPXL45H (luidsprekersysteem).
XL-MP45H Sistema de Micro Componente composto de XL-MP45H (unidade
principal) e CP-XL45H (sistema de alto-falante).
XL-MP45H Micro Component System consisting of XL-MP45H (main unit) and
CP-XL45H (speaker system).
MODELLO
MODEL
MODELO
MODEL
XL-MP45H
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
OPERATION MANUAL
DEUTSCH
FRANÇAIS
ESPAÑOL
Consulte las páginas i a vi y S-1 a S-30.
SVENSKA
ITALIANO
Hänvisa till sidorna i till vi och V-1 till V-30.
Leggere le pagine i a vi e I-1 a I-30.
NEDERLANDS
PORTUGUÊS
ENGLISH
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
Siehe Seiten i bis vi und D-1 bis D-30.
Se reporter aux pages i à vi et F-1 à F-30.
Raadpleeg de bladzijden i t/m vi en N-1 t/m N-30.
Favor consultar as páginas i a vi e P-1 a P-30.
Please refer to pages i to vi and E-1 to E-30.
XL-MP45H(H)_FRONT.fm
TINSZ0227SJZZ
XL-MP45H
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
SPECIAL NOTES
● Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og
73/23/EEC med tillaeg nr. 93/68/EEC.
● Dette produktet oppfyller betingelsene i direktivene 89/336/
EEC og 73/23/EEC i endringen 93/68/EEC.
● Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC
vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
●
● Dieses Gerät entspricht den Anforderungen der EG-Richtlinien
89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG.
● Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/
68/CEE.
● Este aparato satisface las exigencias de las Directivas
89/336/CEE y 73/23/CEE, modificadas por medio de la 93/
68/CEE.
● Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/
EEC och 73/23/EEC så som kompletteras av 93/68/EEC.
● Quest’apparecchio è conforme ai requisiti delle direttive 89/
336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/
EEC.
● Dichiarazione di conformità
La società SHARP ELECTRONICS EUROPE GmbH dichiara
SISTEMI
XL-MP45H è costruito
che il prodotto SHARP MICRO
MINI SISTEMI
CD-XP300H
in conformità alle prescrizioni del D.M.n˚548 del 28/8/95,
pubblicato sulla G.U.n˚301 del 28/12/95 ed in particolare è
conforme a quanto indicato nell’art. 2, comma 1 dello stesso
decreto.
● Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/
EEG en 73/23/EEG, gewijzigd door 93/68/EEG.
● Este equipamento obedece às exigências das directivas 89/
336/CEE e 73/23/CEE, na sua versão corrigida pela directiva
93/68/CEE.
i
● Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist
die Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt
wird, kann das Gerät unter Verwendung der Timer-Betriebsart
oder Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
● Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie
ou la télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par
l’utilisateur. Personne non qualifiée n’enlèvera jamais les
couvercles. L’appareil contenant des organes portés à haute
tension, débrancher l’appareil avant toute réparation ou en
période de non-utilisation.
● This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/
EEC.
0203
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)_common.fm
TINSZ0227SJZZ
1
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas
que pueda reparar. No quite nunca las tapas a menos que se
esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
Desenchufe siempre la clavija de la red del tomacorriente
antes de realizar cualquier servicio de mantenimiento y
cuando no se use el aparato durante un largo período de
tiempo.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar.
Stickkontakten ska därför dras ut från nätuttaget före
reparationsarbeten och bör dras ut om apparaten inte ska
användas på mycket länge.
SHARP TINSZ0227SJZZ (H)
● Quando il tasto ON/STAND-BY si trova in posizione STANDBY, all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STANDBY, l’unità può essere accesa con il modo timer o con il
telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente.
Non togliere mai i coperchi, a meno di non essere qualificati
per farlo. All’interno dell’apparecchio ci sono tensioni
pericolose, per cui si deve sempre staccare la spina del cavo
d’alimentazione dalla presa di corrente prima di qualsiasi
intervento di manutenzione e quando non si usa l’apparecchio
per un lungo periodo di tempo.
● Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, kan het toestel ingeschakeld worden via de timerfunctie
of de afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren
onderdelen. Verwijder de behuizing nooit tenzij u deskundig
bent op dit gebied. In het toestel loopt een gevaarlijke spanning; haal de stekker altijd uit het stopcontact alvorens
onderhoud uit te voeren of wanneer het toestel voor langere
tijd niet gebruikt wordt.
● Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação
através do modo de programação horária ou pelo controle
remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas
pelo usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens
perigosas. Remova sempre o cabo de alimentação da tomada
antes de efetuar qualquer conserto ou quando deixar o
aparelho muito tempo fora de uso.
● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode
or remote control.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long
period.
0203
ii
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H
XL-MP45H(H)_common.fm
TINSZ0227SJZZ
XL-MP45H
● Når ON/STAND-BY-knappen er sat i STAND-BY positionen,
er der stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position,
kan apparatet startes v.hj.a. timer-funksionen eller
fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af
brugeren selv. Fjern aldrig kabinettet med mindre De er
kvalificeret hertil. Apparatet indeholder farlig
strømspaending. Traek altid stikket ud af stikkontakten før
der foretages reparationer, eller hvis apparatet ikke er i
brug i laengere tid.
● Audio-visuelles Material kann Urheberrechte umfassen, die
ohne Genehmigung des Eigentümers dieser Urheberrechte
nicht aufgenommen werden dürfen. Siehe die entsprechenden
nationalen Gesetze.
● Le matériel audio-visuel peut comporter des oeuvres faisant
l’objet de droits d’auteur qui ne peuvent être enregistrées sans
l’autorisation du possesseur du droit d’auteur, veuillez vous
référer aux réglementations nationales en vigueur.
● El material audiovisual puede consistir en trabajos que tengan
derechos de autor y que no deben grabarse sin la autorización
del poseedor de dichos derechos de autor. Sírvase consultar
las leyes aplicables en su país.
● Audiovisuellt material kan innehålla upphovsrättsarbete som
inte skall mångfaldigas utan tillstånd av copyrightinnehavaren.
Se den tillämpliga lagen i ditt land.
DENNA APPARAT ÄR ANSLUTEN TILL 230 V
VÄXELSTRÖM NÄR STICKPROPPEN ÄR INSKJUTEN I
VÄGGUTTAGET. FÖR ATT FULLSTÄNDIGT KOPPLA IFRÅN
APPARATEN, V.G. DRAG UT STICKPROPPEN.
● Il materiale audio-visivo che fosse soggetto a copyright non
può essere registrato senza l’autorizzazione del possessore
del copyright. Si prega di attenersi alle leggi in vigore sul
territorio nazionale.
● Audio-visueel materiaal kan worden beschermd door
auteursrechten, in welk geval het niet mag worden opgenomen
zonder de toestemming van de auteursrechthouder. Zie voor
nadere informatie de betreffende wetten in het land van
gebruik.
● O material audiovisual pode consistir de trabalhos de direitos
autorias que não devem ser gravados sem autorização do
proprietário dos direitos. Favor consultar as leis vigentes em
seu país.
● Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of the
copyright. Please refer to relevant law in your country.
0307
iii
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)_common.fm
TINSZ0227SJZZ
● Vorsicht:
Das Gerät weder Tropf- noch Spritzwasser aussetzen.
Ansonsten besteht die Gefahr eines Brandes oder
elektrischen Schlages. Es sollten keine mit Flüssigkeiten
gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt
werden.
● Attention:
Pour éviter un incendie ou une secousse électrique, mettre
l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser
sur l’appareil un récipient contenant du liquide.
● Advertencia:
Para evitar incendios y descargas eléctricas, no exponga
el aparato a goteo o salpicadura de líquidos. No deberán
ponerse encima del aparato objetos que estén llenos de
líquido, como por ejemplo un florero.
● Advarsel:
Til at forbygge ild og stød risiko, lad vaere med at undsaette
denne indretning for drypning eller overstaenkning. Der må
ikke anbringes nogen genstande fyldt med vand, som for
eksempel vaser, på dette apparat.
XL-MP45H
● Advarsel:
For å unngå brann eller kortslutning, utsett ikke produktet for
vann eller fuktighet. Gjenstander som inneholder vaeske, feks.
en blomstervase, må ikke plasseres oppå apparatet.
● Varoitus:
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos laite on
kostunut, anna sen kuivua ennen kuin käytät sitä
verkkovirralla. Nestettä sisältäviä astioita kuten esim.
kukkamaljakoita ei saa asettaa laitteen päälle.
● Varning:
Utsätt inte enheten för dropp eller stänk för att förhindra
brand eller elektriska stötar. Inga vätskefyllda föremål
såsom vaser bör placeras på enheten.
● Attenzione:
Per prevenire incendi o scosse elettriche, non fare
gocciolare nessun liquido sull’apparecchio e non bagnarlo.
Non collocarvi sopra nessun oggetto riempito d’acqua,
come per esempio vasi.
● Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend water
om brand en elektrische schokken te voorkomen. Met
vloeistoffen gevulde voorwerpen, zoals vazen, mogen niet
op het toestel geplaatst worden.
● Cuidado:
Para evitar incêndio ou choque elétrico, não exponha este
aparelho a gotejamento ou salpicamento de água. Não
coloque objetos com água como, por exemplo, um vaso de
flores, em cima do aparelho.
● Warning:
To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids,
such as vases, should be placed on the apparatus.
Dieses Produkt ist ein Laserprodukt der Klasse 1.
Ce produit est classifié comme étant un LASER DE CLASSE 1.
Este producto está clasificado como un PRODUCTO LÁSER DE
CLASE 1.
Denna produkt klassificeras som KLASS 1 LASERPRODUKT.
Questo prodotto è classificato come CLASS 1 LASER PRODUCT.
Dit product is geclassificeerd als een KLASSE 1 LASER PRODUCT.
Este produto é classificado como PRODUTO LASER DE CLASSE 1.
This product is classified as a CLASS 1 LASER PRODUCT.
Dette produktet er klassifisert som et KLASSE 1 LASERPRODUKT.
Dette produkt er klassificeret som et KLASSE 1 LASERPRODUKT.
Tämä laite on luokiteltu LUOKAN 1 LASERLAITTEEKSI.
Denna produkt klassificeras som KLASS 1 LASERAPPARAT.
0307
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)_common.fm
iv
TINSZ0227SJZZ
XL-MP45H
● VORSICHT
Verwendung von Regelungen oder Einstellungen bzw.
Durchführung von anderen Verfahren als die hierin
angegebenen kann zum Aussetzen gefährlicher Strahlung
führen.
Da der in diesem Compact Disc Player verwendete Laserstrahl
für die Augen schädlich ist, ist das Gehäuse unter keinen
Umständen zu zerlegen.
Wenden Sie sich für Wartungsarbeiten nur an berechtigten
Fachhändler.
● ATTENTION
Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement. En cas de non-respect,
on s’exposera à une radiation dangereuse.
Éviter absolument de démonter l’appareil, qui utilise un rayon
laser nuisible aux yeux. Pour toute réparation, s’adresser à
une personne qualifiée.
● PRECAUCIÓN
El uso de los controles, ajustes o ejecución de procedimientos
distintos de los especificados podría causar la exposición a
radiación peligrosa.
No intente desmontar la caja ya que el haz de láser usado en
este reproductor de discos compactos es perjudicial para los
ojos. Para el servicio de reparación, consulte a una persona
cualificada.
● LET OP
Gebruik van regelaars, het maken van instellingen, gebruik
of handelingen anders dan in deze gebruiksaanwijzing
vermeld, kan gevaarlijke straling blootleggen.
De laserstraal in deze CD-speler kan de ogen beschadigen,
Probeer derhalve de ombouw niet te verwijderen. Laat
reparaties alleen over aan erkend onderhoudspersoneel.
● CUIDADO
O uso de controles, ajustes ou a execução de procedimentos
além daqueles especificados aqui pode resultar em perigosa
exposição à radiação.
Como os raios laser usados neste player de CD são perigosos
para os olhos, não tente desmontar o aparelho. Solicite o
conserto somente para pessoas especializadas.
● CAUTION
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
● OBSERVERA
Användning av reglage eller justeringar eller handhavande
på annat sätt än som anges kan leda till farlig bestrålning.
Försök inte ta isär höljet eftersom CD-spelarens laserstråle
är skadlig för ögonen. Överlåt service endast till kvalificerad
personal.
● ATTENZIONE
L’uso dei comandi e l’effettuazione di regolazioni e
procedimenti diversi da quelli specificati nel manuale possono
provocare una pericolosa esposizione alle radiazioni.
Poiché il raggio laser usato in questo giradischi può
danneggiare gli occhi, non smontare l’apparecchio. Per le
riparazioni rivolgersi a personale specializzato.
0203
v
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)_common.fm
TINSZ0227SJZZ
Eigenschaften der Laserdiode
Material: GaAIAs
Wellenlänge: 780 nm
Emissionsdauer: kontinuierlich
Laser-Ausgang: max. 0,6 mW
XL-MP45H
Caractéristiques de la diode laser
Matière: GaAIAs
Longueur d’onde: 780 nm
Durée d’émission: ininterrompue
Puissance de sortie laser maximale: 0,6 mW
Características del diodo láser
Material: GaAIAs
Longitud de onda: 780 nm
Duración de emisión : continua
Salida de láser: máx. 0,6 mW
Laserdiodens egenskaper
Material: GaAIAs
Våglängd: 780 nm
Utstrålningsvaraktighet: kontinuerlig
Lasereffekt: max. 0,6 mW
Proprietà del diodo laser
Materiale: GaAIAs
Lunghezza d’onda: 780 nm
Durata di emissione: continua
Uscita massima del laser: 0,6 mW
ADVERSEL-SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
SE IKKE IND I STRÅLEN-HELLER IKKE MED OPTISKE INSTRUMENTER.
VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ
OPTISEN LAITTEEN LÄPI.
VARNING-SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ
STRÅLEN GENOM OPTISKT INSTRUMENT.
Laser diode specificaties
Materiaal: GaAIAs
Golflengte: 780 nm
Stralingsduur: doorlopend
Laseruitgang: max. 0,6 mW
Propriedades do diodo laser
Material: GaAlAs
Comprimento de onda: 780 nm
Duração da emissão: contínua
Saída de laser: máx. 0,6 mW
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
0203
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN
I DENNA BRUKSANVISNING SPECIFICERAS. KAN
ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR
LASERKLASS 1.
vi
0203
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)_common.fm
TINSZ0227SJZZ
ENGLISH
XL-MP45H
ENGLISH
Introduction
Contents
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully. It
will guide you in operating your SHARP product.
! General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4
! Preparation for Use
Accessories
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Please confirm that the following accessories are included.
General Information
Page
! Basic Operation
Sound control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
! CD or MP3 disc Playback
Listening to a CD or MP3 disc . . . . . . . . . . . . . . . . . . . . . . 10, 11
Advanced CD or MP3 disc playback . . . . . . . . . . . . . . . . 12 - 14
AC power lead 1
Remote control 1
! Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Listening to the memorised station . . . . . . . . . . . . . . . . . . . . . 16
! Tape Playback
Listening to a cassette tape . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
"AA" size battery (UM/SUM-3,
R6, HP-7 or similar) 2
AM loop aerial 1
! Tape Recording
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . . 18, 19
! Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . . . . . . . . 20 - 24
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . 25 - 27
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
FM aerial 1
Note:
Only the above accessories are included.
! References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 29
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
E-1
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
Precautions
XL-MP45H
" Please ensure that the equipment is positioned in a well ventilated area and that there is at least 10 cm (4") of free space along
the sides and back. There must also be a minimum of 20 cm (8")
of free space on the top of the unit.
10 cm (4") 10 cm (4")
20 cm (8")
10 cm (4")
" Use the unit on a firm, level surface free from vibration.
" Keep the unit away from direct sunlight, strong magnetic fields,
excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generate electrical
noise.
" Do not place anything on top of the unit.
" Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
" If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
" In case of an electrical storm, unplug the unit for safety.
" Hold the AC power plug by the head when removing it from the
wall socket, as pulling the lead can damage internal wires.
" Do not remove the outer cover, as this may result in electric
shock. Refer internal service to your local SHARP service
facility.
" The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
" No naked flame sources, such as lighted candles, should be
placed on the apparatus.
" Attention should be drawn to the environmental aspects of battery disposal.
" The apparatus is designed for use in moderate climate.
" This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
" The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.
" CD players use a laser pickup which can damage the eyes if
viewed directly. Do not look at the pickup, and do not touch
the pickup directly.
ENGLISH
! Volume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
! Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collection and player.
" Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
" Keep your discs away from direct sunlight, heat, and excessive
moisture.
" Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
General Information
! General
YES
Correct
8
E-2
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
Controls and indicators
ENGLISH
1
2
6
7
8
9
3
General Information
4
10 11 12
13 14
5
15 16 17 18 19 20 21 22 23
25
26
27
24
29
30
31
28
32
Reference page
1. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Disc Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7. Function Selector Button . . . . . . . . . . . . . . . . . 10, 15, 17, 27
8. Disc or Tape Stop, Tuning Down Button . . . . . . . . 11, 15, 17
9. Disc Play or Pause, Tape Play,
Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . 10, 11, 15, 17
10. Bass/Treble Selector Button . . . . . . . . . . . . . . . . . . . . . . . . . 8
11. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 16
12. Tape Record Pause Button . . . . . . . . . . . . . . . . . . . . . . 18, 19
13. Disc Track Down or Fast Reverse, Tape Rewind,
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . 12, 16, 17
14. Disc Track Up or Fast Forward, Tape Fast Forward,
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . 12, 16, 17
15. Timer Play Indicator
16. Tape Record Indicator
17. Sleep Indicator
18. Disc Random Indicator
19. Memory Indicator
20. RDS Indicator
21. Traffic Programme Indicator
22. Traffic Announcement Indicator
23. FM Stereo Mode Indicator
24. FM Stereo Receiving Indicator
25. MP3 Disc Indicator
26. Disc Play Indicator
27. Disc Repeat Indicator
28. AC Power Input Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
29. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
30. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
31. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . 27
32. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
E-3
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Buttons with " " mark in the illustration or highlighted in bold on the
right can be operated on the remote control only.
Reference page
3. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8. Disc Fast Reverse, Tuning Down,
Tape Rewind Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 15, 17
9. Disc or Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . 10, 17
10. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . 11, 17
11. Disc Track Down, Tuner Preset Down Button . . . . . . . 9, 12, 16
12. RDS ASPM (Auto Station Programme Memory) Button . . 23
13. RDS Programme Type/
Traffic Information Search Button . . . . . . . . . . . . . . . . . . . 24
14. Treble Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 8
15. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 14, 16
16. Programme Clear Button . . . . . . . . . . . . . . . . . . . . . . . 14, 16
17. CD/MP3 Disc Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
18. Tuner and Band Selector Button . . . . . . . . . . . . . . . . . . . . . . 15
19. MP3 Disc Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
20. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 25
22. Disc Fast Forward, Tuning Up,
Tape Fast Forward Button . . . . . . . . . . . . . . . . . . . . . 12, 15, 17
23. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
24. Volume Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 25
25. Disc Track Up, Tuner Preset Up Button . . . . . . . . . . . . 9, 12, 16
26. RDS Display Mode Select Button . . . . . . . . . . . . . . . . . . . . 20
27. Tape Record Pause Button . . . . . . . . . . . . . . . . . . . . . . . 18, 19
28. Bass Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
29. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
30. Disc Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
31. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
32. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
General Information
1. Full-Range Speaker
2. Speaker Wire
8
E-4
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
System connections
ENGLISH
FM aerial
AM loop aerial
(See page 27.)
VCR, DVD, etc.
Preparation for Use
Right speaker
Left speaker
RCA lead
(not supplied)
Right speaker
Left speaker
White line
Plain
Wall socket
(AC 230 V, 50 Hz)
E-5
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
! Aerial connection
! Speaker connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal
can be received.
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Incorrect
Placing the speaker system:
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
! Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Wall
Screws (not supplied)
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
External FM aerial
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
Preparation for Use
Caution:
" Use speakers with an impedance of 4 ohms
or more, as lower impedance speakers can
damage the unit.
" Do not mistake the right and the left channels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
8
E-6
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Remote control
! Battery installation
1
2
3
Remove the battery cover.
Insert the supplied batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Replace the cover.
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
Preparation for Use
! Test of the remote control
Check the remote control after checking all the connections (see
pages 5 - 6).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
Remote sensor
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunction.
0.2 m - 6 m
(8" - 20')
E-7
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
Sound control
XL-MP45H
ENGLISH
! Adjusting the volume
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
2..... 29 30 MAXIMUM
! Adjusting the bass
Main unit operation:
1 Press the BASS/TREBLE button to select "BASS".
2 Within 6 seconds, turn the VOLUME control to adjust the bass.
Remote control operation:
Press the BASS (+ or -) button to adjust the bass.
5
...
0
... 5
Basic Operation
0 1
! Adjusting the treble
Main unit operation:
1 Press the BASS/TREBLE button to select "TRE".
2 Within 6 seconds, turn the VOLUME control to adjust the treble.
Remote control operation:
Press the TREBLE (+ or -) button to adjust the treble.
5
...
0
...
5
8
E-8
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
Setting the clock
ENGLISH
3
Within 30 seconds, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY button.
" Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.
" When the 12-hour display is selected, "AM" will change automatically to "PM".
Basic Operation
4
14
Within 30 seconds, press the PRESET ( or ) button to
adjust the minutes and then press the MEMORY button.
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the CLOCK button and within 3 seconds, press the
MEMORY button.
2
Within 30 seconds, press the PRESET ( or ) button to
select 24-hour or 12-hour display and then press the MEMORY button.
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 29 for details.]
To confirm the time display when the power is on:
Press the CLOCK button.
The time display will appear for about 3 seconds.
Note:
The "CLOCK" or time will flash when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from the beginning. If the time is flashing, step 2 (for selecting the 24-hour or 12-hour display) will be
skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 29 for details.]
2 Perform "Setting the clock" from the beginning.
E-9
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
SHARP TINSZ0227SJZZ (H)
"0:00"
" Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
" The hour will not advance even if minutes advance from "59"
to "00".
Listening to a CD or MP3 disc
1
2
Press the ON/STAND-BY button to turn the power on.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
3
Press the
ment.
4
Place a disc on the spindle,
label side up.
5
Close the disc compartment by firmly pushing the corner
marked "PUSH CLOSE".
6
Press the
Notes:
" Due to the structure of its disc information, it takes longer to read
an MP3 disc than a normal CD (approximately 20 to 90 seconds).
" "MP3" indicator will light up if an MP3 disc is initialised.
" This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
" During VBR file playback, time counter in the display may differ
from its actual playback time.
Press the FUNCTION button until "CD" appears on the display.
When operating with the remote control, press the CD button.
CD EJECT button to open the disc compart-
( ) button to start playback from track 1.
When the last track on the disc has finished playing, the unit will
stop automatically.
SHARP TINSZ0227SJZZ (H)
8
E-10
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
CD or MP3 disc Playback
15
XL-MP45H
ENGLISH
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
XL-MP45H(H)E1.fm
TINSZ0227SJZZ
XL-MP45H
Listening to a CD or MP3 disc (continued)
ENGLISH
CD or MP3 disc Playback
To interrupt playback:
Main unit operation:
Press the
button.
To resume playback from the same point, press the
button
again.
Remote control operation:
Press the button.
To resume playback from the same point, press the button.
To stop playback:
Press the button.
" To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the MP3 DISPLAY
button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
Folder name
Total number of tracks
To remove the disc:
Whilst in the stop mode, press the
CD EJECT button.
Track name
Caution:
! If a disc is damaged, dirty, or loaded upside down, "NO DISC" or
"READ ERR" will appear on the display.
! Keep foreign objects out of the disc compartment.
! Subjecting the unit to shock or vibration may cause mistracking.
! When the unit is not being used, be sure to close the disc compartment. If it is left open, the lens may be covered with dust and
the unit may not operate properly.
! If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
[When in the playback mode]
Track number Elapsed playback
time
Folder name
Track name
" Headphones
! Before plugging in or unplugging the headphones, reduce the volume.
! Be sure your headphones have a 3.5 mm (1/
8") diameter plug and are between 16 ohms
and 50 ohms impedance. The recommended
impedance is 32 ohms.
! Plugging in the headphones disconnects the
speakers automatically. Adjust the volume
using the VOLUME control.
E-11
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
Advanced CD or MP3 disc playback
1
Whilst in the stop mode, press the MP3 DISPLAY button on
the remote control to display the folder name.
XL-MP45H
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
Note:
You can skip to any track by pressing the
edly until the desired track number appears.
2
3
Select the desired folder by pressing the
4
5
Select the desired track by pressing the
or
( ) button to begin
or
button repeat-
button.
" To locate the desired portion
Press the MP3 DISPLAY button to
display the track name.
Press the
playback.
ENGLISH
" To locate the beginning of a track
The sound will be heard during operation with a CD, but not with an
MP3 disc. Check the displayed playback time for an MP3 disc.
or
button.
For fast forward:
Press and hold down the
button on the main unit or the
ton on the remote control during playback.
For fast reverse:
Press and hold down the
button on the main unit or the
ton on the remote control during playback.
but-
but-
Notes:
( ) or
( ) but! Normal playback will resume when the
ton is released.
! When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the disc will start playback automatically.
CD or MP3 disc Playback
" To select the desired folder or track by name
(MP3 discs only)
8
E-12
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Advanced CD or MP3 disc playback (continued)
" Direct search of the track
" Repeat play
By using the direct search buttons, the desired tracks can be played.
All tracks or a programmed sequence can be continuously repeated.
To repeat all tracks:
1 Press the REPEAT button.
2 Press the
( ) button.
To repeat a desired track:
1 Perform steps 1 - 3 in the "Programmed play" section on page 14
and then press the REPEAT button.
2 Press the
( ) button.
1
Whilst in the stop mode, use
the direct search buttons on
the remote control to select the
desired track.
CD or MP3 disc Playback
Selected track number
! The direct search buttons allow you to select up to number 9.
! When selecting number 10 or more, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
To cancel repeat play:
Press the REPEAT button again. " " will go out.
Caution:
After performing repeat play, be sure to press the
wise, the disc will play continuously.
15
button. Other-
" Random play
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
2
The tracks can be played in random order automatically.
Press the RANDOM button to begin random play.
Press the
( ) button to start playback.
Playback of the selected track is started. When the last track on
the disc has finished playing, the unit will stop automatically.
To stop playback:
Press the button.
To cancel random play:
Press the RANDOM button again. "RANDOM" will go out.
Notes:
! The random play will stop automatically when all tracks are
played once. (The same track will not be played back twice.)
! In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
button during random play, you can move to
! If you press the
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
E-13
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
SHARP TINSZ0227SJZZ (H)
Notes:
! The selected track can be started simply by pressing the direct
search buttons during playback. [It is not necessary to press the
( ) button.]
! A track number higher than the number of tracks on the disc cannot be selected.
! During random play, direct search is not possible.
! For MP3 discs, you can select the track number but cannot select
the folder by pressing the direct search button(s).
XL-MP45H
ENGLISH
You can choose up to 32 selections for playback in the order you
like.
3
Repeat steps 1 - 2 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
4
Press the
( ) button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode
and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
16
1
Whilst in the stop mode, use the direct search buttons to
select the desired track.
Selected track number
You can also select a track by pressing the
2
or
button.
Press the MEMORY (MEMORY/SET) button to save the
track number.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
! Opening the disc compartment automatically cancels the programmed sequence.
! Even if you press the ON/STAND-BY button to enter the stand-by
mode or the function is changed from CD to some other function,
the programmed selections will not be cleared.
! During the programme operation, random play is not possible.
! For MP3 discs, you can select the track number but cannot select
the folder by pressing the direct search button(s).
CD or MP3 disc Playback
" Programmed play
SHARP TINSZ0227SJZZ (H)
Playback order
When the track is memorised, "MEMORY" will appear.
8
E-14
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
XL-MP45H
Listening to the radio
ENGLISH
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Radio
Notes:
! When radio interference occurs, auto scan tuning may stop
automatically at that point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the TUNING button again.
! When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator
will light. Finally, the station name will appear.
! Full auto tuning can be achieved for RDS stations "ASPM",
see page 23.
1
2
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button until "FM" or "AM" appears on
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
To receive an FM stereo transmission:
Press the FUNCTION [TUNER (BAND)] button to display the "ST"
indicator.
! " " will appear when an FM broadcast is in stereo.
! If the FM reception is weak, press the FUNCTION [TUNER
(BAND)] button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
E-15
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
Listening to the memorised station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
2
Perform steps 1 - 3 in "Listening to the radio" on page 15.
3
Within 30 seconds, press the PRESET ( or ) button to select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
XL-MP45H
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
Press the MEMORY/SET (MEMORY)
button to enter the preset tuning saving mode.
4
Within 30 seconds, press the MEMORY/SET (MEMORY) button to store
that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead disconnection.
ENGLISH
! To recall a memorised station
Preset channel
Frequency and frequency band
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
station is located.
or
) button again when the desired
Radio
! Memorising a station
! To clear a memorised station
1
2
3
Recall the memorised station.
Whilst it is displayed, press the MEMORY/SET (MEMORY) button.
Within 30 seconds, press the CLEAR
button on the remote control.
! To erase entire preset memory
1
2
Press the ON/STAND-BY button to
enter the power stand-by mode.
Whilst pressing down the MEMORY/
SET button and the FUNCTION button, press the ON/STAND-BY button
until "TUNER CL" appears.
8
E-16
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
XL-MP45H
Listening to a cassette tape
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not recommended.)
" Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
Tape Playback
ENGLISH
3
Open the cassette compartment by pushing the area
marked "PUSH EJECT ".
4
Load a cassette into the cassette compartment with the
side to be played facing toward you.
5
Close the cassette compartment by pushing the area
marked "PUSH EJECT ".
6
Press the
button to start playback.
When playback is performed using the remote control, press
the button.
To stop playback:
Press the button.
Fast forward/rewind:
To advance the tape, press the
button on the main unit or the
button on the remote control. To rewind it, press the
button on
the main unit or the
button on the remote control.
1
2
Press the ON/STAND-BY button to turn the power on.
Caution:
" To remove the cassette, press the button, and then open the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette compartment will
not open. In this case, wait until the power is restored.
( ) button is pressed during tape playback, the unit
" Even if the
will not enter the pause mode.
Press the FUNCTION button until "TAPE" appears on the
display.
When operating with the remote control, press the TAPE button.
E-17
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
Recording on a cassette tape
XL-MP45H
ENGLISH
! Recording from a CD or MP3 disc
1
2
Press the ON/STAND-BY button to turn the power on.
3
4
Load the desired disc.
5
Press the
button.
Recording will be paused.
6
Press the
cording.
Press the FUNCTION button until "CD" appears on the display.
When operating with the remote control, press the CD button.
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
( ) button to start re-
" Playback of the disc will start in a few seconds after the tape
starts.
" When the playback of the disc is finished or the end of the
tape is reached, the disc and the cassette will stop automatically.
Tape Recording
Before recording:
" When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
" SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
" The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
" For recording, use only normal tapes. Do not use metal or
CrO tapes.
" Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
To perform programmed recording:
1 Programme tracks (see page 14).
2 Press the
button.
3 Press the
( ) button.
To stop recording:
Press the button.
The disc and tape will stop.
To interrupt recording:
Press the
button.
" Recording is paused, but disc playback will continue.
To resume recording, press the
( ) button.
8
E-18
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Recording to a cassette tape (continued)
! Recording from the radio
1
2
3
Tune in to the desired station. (See page 15.)
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the
button.
Recording will be paused.
Tape Recording
4
Press the
cording.
( ) button to start re-
To stop recording:
Press the button.
To interrupt recording:
Press the
button.
To resume recording, press the
! Erasing recorded tapes
1
2
3
4
Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
Press the FUNCTION button until "TAPE" appears on the display.
When operating with the remote control, press the TAPE button.
Press the
button.
Press the
( ) button to start erasing.
Erase-prevention tab of cassette tapes:
" When recording on a cassette
Side A
tape, make sure that the eraseprevention tabs are not removed. Cassettes have removable tabs that prevent
accidental recording or erasing.
" To protect the recorded sound, Tab for side B Tab for side A
remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape
without the tab.
( ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
E-19
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
Using the Radio Data System (RDS)
XL-MP45H
ENGLISH
! Information provided by RDS
Each time the DISPLAY button is pressed, the display will
switch as follows:
Station name (PS)
Programme type (PTY)
You can control the RDS by using the remote control only.
Frequency
When you are tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will change in
the following order:
NO PS
NO PTY
FM 98.80 MHz
Advanced Features
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
8
E-20
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E2.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Using the Radio Data System (RDS) (continued)
! Notes for RDS operation
Advanced Features
If any of the following events occur, it does not mean that the
unit is faulty:
" "PS", "NO PS" and a station name appear alternately, and the
unit does not operate properly.
" If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work properly.
" When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
" "NO PS" or "NO PTY" will flash for about 5 seconds, and then the
frequency will be displayed.
Descriptions of the PTY (Programme Type) codes, TP (Traffic
Programme) and TA (Traffic Announcement).
You can search for and receive the following PTY, TP and TA signals.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
Short accounts of facts, events and publicly expressed views, reportage and actuality.
Topical programme expanding or enlarging upon
the news, generally in different presentation style or
concept, including debate, or analysis.
Programmes whose purpose is to impart advice in
the widest sense.
Programme concerned with any aspect of sport.
Programme intended primarily to educate, of which
the formal element is fundamental.
All radio plays and serials.
Programmes concerned with any aspect of national
or regional culture, including language, theatre, etc.
Programmes about the natural sciences and technology.
Used for mainly speech-based programmes usually
of light-entertainment nature, not covered by other
categories. Examples include: quizzes, panel
games, personality interviews.
Commercial music, which would generally be considered to be of current popular appeal, often featuring in current or recent record sales charts.
Contemporary modern music, usually written and
performed by young musicians.
Current contemporary music considered to be
"easy-listening", as opposed to Pop, Rock or Classical, or one of the specialised music styles, Jazz,
Folk or Country. Music in this category is often but
not always, vocal, and usually of short duration.
E-21
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Classical music for general, rather than specialist
appreciation. Examples of music in this category
are instrumental music, and vocal or choral works.
Performances of major orchestral works, symphonies, chamber music, etc., and including Grand Opera.
Musical styles not fitting into any of the other categories. Particularly used for specialist music of
which Rhythm & Blues and Reggae are examples.
Weather reports and forecasts and meteorological
information.
Stock Market reports, commerce, trading, etc.
For programmes targeted at a young audience, primarily for entertainment and interest, rather than
where the objective is to educate.
Programmes about people and things that influence
them individually or in groups. Includes: sociology,
history, geography, psychology and society.
Any aspect of beliefs and faiths, involving a God or
Gods, the nature of existence and ethics.
Involving members of the public expressing their
views either by phone or at a public forum.
Features and programmes concerned with travel to
near and far destinations, package tours and travel
ideas and opportunities. Not for use for announcements about problems, delays, or roadworks affecting immediate travel where TP/TA should be used.
Programmes concerned with recreational activities
in which the listener might participate. Examples include, Gardening, Fishing, Antique collecting,
Cooking, Food & Wine, etc.
Polyphonic, syncopated music characterised by improvisation.
COUNTRY
Songs which originate from, or continue the musical
tradition of the American Southern States. Characterised by a straightforward melody and narrative
story line.
NATION M
Current Popular Music of the Nation or Region in
that country's language, as opposed to International 'Pop' which is usually US or UK inspired and in
English.
OLDIES
Music from the so-called "golden age" of popular
music.
FOLK M
Music which has its roots in the musical culture of a
particular nation, usually played on acoustic instruments. The narrative or story may be based on historical events or people.
DOCUMENT Programme concerned with factual matters, presented in an investigative style.
TEST
Broadcast when testing emergency broadcast
equipment or receivers.
ALARM
Emergency announcement made under exceptional circumstances to give warning of events causing
danger of a general nature.
NONE
No programme type (receive only).
TP
Broadcasts which carry traffic announcements.
TA
Traffic announcements are being broadcast.
Advanced Features
LIGHT M
8
E-22
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Using the Radio Data System (RDS) (continued)
! Using the Auto Station Programme Memory
(ASPM)
Advanced Features
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
1
Press the TUNER (BAND) button to select
"FM".
2
Press and hold down the ASPM button for
at least 3 seconds.
1
After "ASPM" has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
Notes:
" If the same station is broadcasting on different frequencies, the
strongest frequency will be stored in memory.
" Any station which has the same frequency as one stored in memory will not be stored.
" If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
" If no stations have been stored in memory, "END" will appear for
about 4 seconds.
" If the RDS signals are very weak, station names may not be
stored in memory.
To erase one of the contents of preset memory:
1 Press the PRESET ( or ) button to select the preset channel
number you want to erase.
2 Press the MEMORY button.
3 Within 30 seconds, press the CLEAR button.
To erase all of the contents of preset memory:
Perform to "To erase entire preset memory" on page 16.
2
When an RDS station is found, "RDS" will appear first, and
then "MEMORY" and the preset channel number will flash
for 2 seconds. Finally the station will be stored in memory.
3
After scanning, the number of stations stored in memory will
be flash for 4 seconds.
To stop the ASPM operation before it is complete:
Press the ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
To store a station name again if the wrong name was stored in
memory:
It may be impossible to store station names in memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
1 Press the PRESET ( or ) button to check whether the names
are correct.
2 If you find a wrong name during receiving the station, wait until
the correct name will be displayed. And then press the MEMORY
button.
3 Within 5 seconds, press the MEMORY button whilst the preset
channel number is flashing.
" The new station name has been stored in memory correctly.
Notes:
" The same station name can be stored in different channels.
" In a certain area or during certain time periods, the station names
may temporarily be different.
E-23
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
To specify programmed types and select stations (PTY
search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 21 - 22) from the stations in memory.
1
2
Press the TUNER (BAND) button to select "FM".
Press the PTY.TI button.
"PTY TI" will flash for about 6 seconds.
3
Within 6 seconds, press the PRESET (
lect the programme type.
or
) button to se-
Each time the button is pressed, the programme type will appear. If the button is held down for more than 0.5 seconds, the
programme type will appear continuously.
4
Notes:
" If the display has stopped flashing, start again from step 2. If the
unit finds a desired programme type, the corresponding channel
number will flash for about 4 seconds, and then the station name
will flash for 7 seconds, which will remain lit.
" If you want to listen to the same programme type of another station, press the PTY.TI button whilst the channel number or station name is flashing. The unit will look for the next station.
" If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP" will appear.
(This does not mean that you can listen to the traffic information at
that time.)
When the traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the PRESET ( or ) button to select a desired station.
3 The station name will be displayed for 3 seconds. Then the display will change.
Advanced Features
! To recall stations in memory
Whilst the selected programme type is flashing (within 4
seconds), press the PTY.TI button again.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
8
E-24
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Timer and sleep operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc,
tuner, tape) at the preset time.
Advanced Features
Sleep operation:
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
! Timer playback
Before setting timer:
1
Press the CLOCK button to check that the clock is set to the
correct time. (Refer to page 9.)
2
Load a cassette or disc to be played.
1
2
Press the ON/STAND-BY button to turn the power on.
3
Adjust the volume using the VOLUME buttons.
Press the CD, TUNER (BAND) or TAPE button to select the
desired function.
When you select the TUNER (BAND), tune into the desired station.
Do not turn the volume up too high.
4
Press the TIMER button and within 3 seconds, press the
MEMORY button.
5
Within 30 seconds, press the PRESET ( or ) button to
specify the hour to start, then press the MEMORY button.
E-25
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
Within 30 seconds, press the PRESET ( or ) button to
specify the minutes to start, then press the MEMORY button.
" The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode automatically.
" " " will appear and the current time will be displayed.
! Sleep operation
1
2
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer standby mode.
8
Press the SLEEP button and within 3 seconds, press the
MEMORY button.
To change the sleep time:
Whilst the sleep time is displayed, press the PRESET (
button.
(Maximum: 3 hours - Minimum: 5 minutes)
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7
Play back the desired sound source.
The unit will enter the stand-by mode one hour after the
timer playback starts.
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Note:
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
3:00
(cancel)
3
4
2:00
0:05
1:30
0:10
or
)
1:00
0:15
0:30
Within 30 seconds, press the MEMORY button.
Your system will enter the power stand-by mode automatically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep operation finishes.
Advanced Features
6
ENGLISH
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
8
E-26
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Timer and sleep operation (continued)
Enhancing your system
! To use timer and sleep operation together
The connection lead is not included. Purchase a commercially available lead as shown below.
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
Advanced Features
1
2
White
Red
Set the sleep time (steps 1 - 3, page 26).
White
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 25 - 26).
RCA lead
(not supplied)
Sleep timer setting
VCR, DVD, etc.
Red
To the line output sockets
Timer playback setting
! Listening to the playback sounds from VCR,
DVD, etc.
5 minutes - 3 hours
Sleep operation will
automatically stop.
Timer playback
start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
1
2
3
4
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the television.
! To record on a tape
1
2
3
4
5
Load a cassette into the cassette compartment with the side to
be recorded on facing you.
Press the VIDEO/AUX button.
Press the
button.
Press the
( ) button.
Play the VCR, DVD, etc.
E-27
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
Troubleshooting chart
XL-MP45H
ENGLISH
! Tuner
Symptom
" The radio makes unusual
noises continuously.
! General
Symptom
Possible cause
" The clock is not set to the " Did a power failure occur? Reset
correct time.
the clock. (Refer to page 9.)
" When a button is pressed, " Set the unit to the power standthe unit does not respond.
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 29.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires disconnected?
! CD player
Symptom
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the standle or is not performed
dards?
properly.
" Is the disc distorted or
scratched?
" Playback sounds are
" Is the unit located near excessive
skipped, or stopped in the
vibrations?
middle of a track.
" Is the disc very dirty?
Possible cause
" Is the unit placed near the TV or
computer?
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
! Cassette deck
Symptom
" Cannot record.
"
"
"
Possible cause
" Is the erase-prevention tab removed?
Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality.
record on a metal or CrO tape.)
Cannot erase completely.
Sound skipping.
" Is there slack in the tape?
" Is the tape stretched?
Cannot hear treble.
" Are the capstans, pinch rollers,
or heads dirty?
Sound fluctuation.
"
"
" Cannot remove the tape.
" If a power failure occurs during
playback, the heads remain engaged with the tape. Do not open
the compartment with great force.
References
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
! Remote control
Symptom
" The remote control does
not operate.
" Has condensation formed inside
the unit?
Possible cause
" Is the AC power lead of the unit
plugged in?
" Is the battery polarity correct?
" Are the batteries dead?
" Is the distance or angle incorrect?
" Does the remote control sensor
receive strong light?
8
E-28
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
XL-MP45H
ENGLISH
Troubleshooting chart (continued)
Maintenance
! If trouble occurs
! Cleaning the CD pickup lens
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
Do not touch the laser pickup lens. If
fingerprints or dust accumulate on the
pickup, clean it gently with a dry cotton
swab.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
! Cleaning the cabinet
References
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
! Clearing all the memory (reset)
1
2
Press the ON/STAND-BY button to
enter the power stand-by mode.
Whilst pressing down the MEMORY/
SET button and the
button, press
the ON/STAND-BY button until
"CLEAR" appears.
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.
16
! Cleaning the tape-handling parts
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
A
B
C
D
! Condensation
Erase head
Recording/Playback head
Capstan
Pinch roller
" After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
E-29
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
SHARP TINSZ0227SJZZ (H)
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
Specifications
! General
Power source
Power
consumption
Dimensions
Weight
AC 230 V, 50 Hz
Power on: 26 W
Power stand-by: 0.9 W
Width: 160 mm (6-5/16")
Height: 240 mm (9-1/2")
Depth: 247 mm (9-3/4")
2.5 kg (5.5 lbs.)
! Amplifier
Output power
Output terminals
Input terminals
PMPO: 30 W (total)
MPO: 15 W (7.5 W + 7.5 W) (DIN 45 324)
RMS: 10 W (5 W + 5 W) (DIN 45 324)
Speakers: 4 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
! Tuner
Frequency range
XL-MP45H
ENGLISH
! CD player
Type
Signal readout
Compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
D/A converter
Frequency
response
Dynamic range
90 dB (1 kHz)
! Cassette deck
Frequency
response
Signal/noise ratio
Wow and flutter
50 - 14,000 Hz (normal tape)
50 dB (recording/playback)
0.3 % (DIN 45 511)
! Speaker
Type
Maximum input
power
Rated input power
Impedance
Dimensions
Weight
10 cm (4") full-range speaker
10 W
References
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
5W
4 ohms
Width: 145 mm (5-3/4")
Height: 240 mm (9-1/2")
Depth: 175 mm (6-15/16")
1.4 kg (3.1 lbs.)/each
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
8
E-30
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)E3.fm
TINSZ0227SJZZ
SHARP CORPORATION
9906
TINSZ0227SJZZ
03J N HK 1
03/8/20
Downloaded From Disc-Player.com Sharp Manuals
XL-MP45H(H)_BACK.fm
TINSZ0227SJZZ
DOWN
UP
XL-MP45H
Downloaded From Disc-Player.com Sharp Manuals
MICRO COMPONENT SYSTEM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement