Boss Audio Systems | BVI9994 | Instruction manual | Boss Audio Systems BVI9994 Instruction manual

PRECAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightening flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
!
The exclamation point within an equilateral triangle is intended to alert user to
the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
CLASS 1 LASER PRODUCT
Laser product symbol: located on the rear panel of the unit, indicate this player is a class
laser product, only use weak laser and no hazardous radiation outside of the unit.
1.Read through this instruction manual before installation and use.
2.Before removing the unit, remove the disc from the unit first.
3.Do not open the cover or touch any of the components exposed out of the unit, only for
qualified technicians.
4.Do not expose the unit to direct sunlight or nearby objects that radiate heat to avoid
damage the unit.
5.Do not place the unit in moist and humid conditions.
6.Please ensure the ventilation holes are not covered to avoid overheating and malfunction.
7.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner,
alcohol or sprays.
Wires Connection Description
Description of Wires Connection
Fixing Screw Bolt
GREEN
Wiring Connecting Socket 2 PARKING LINE
WHITE
REVERSAL LINE
BLACK
IPod IN
Wiring Connecting Socket 1
Radio Antenna jack BLACK
BLACK
USB LINE IN
BLACK
video out yellow
KEY GROUND(BLACK)
KEY A(BROWN)
KEY B(YELLOW)
from the bottom cover of the chassis
1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.
2. Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other
end of the Ground Wire to connect the negative pole of the power source. Otherwise, the video on screen
maybe flashes.
Description of the Wiring Diagram for Socket 1
WIRING CONNECTING SOCKET 1
WIRING CONNECTING PLUG 1
ISO CONNECTOR
YELLOW
MEMORY B+
BLACK(GND)
IGNITION SWITCH
RED
WOOFER LINE OUT
GREEN
FUSED
FILTER
BOX 1A
& 10 A
FUSES
BLACK
FRONT
+
LEFT
SP
+
RED R
FRONT AUDIO RCA OUT
BLUE AUTO ANT
GRAY
WHITE
WHITE / BLACK
GREEN
FRONT
+
RIGHT
SP
GRAY / BLACK
VIOLET
WHITE L
+
REAR
REAR
GREEN / BLACK
VIOLET / BLACK
NOTES:
1. Only speakers with 4 ohms impedance may be used.
2. Ensure that the blue auto antenna cable does not make contact
with any ground connection.
Description of the Wiring Diagram for Socket 2
WIRING CONNECTING SOCKET 2
WIRING CONNECTING PLUG 2
RED R
BROWN
WHITE L
YELLOW VIDEO
YELLOW
YELLOW
AV IN
GREY
VIDEO RCA OUT
BLACK
YELLOW
GREY
REAR AUDIO RCA OUT
BLUE
BACKGROUND AUDIO RCA OUT
RED R
WHITE L
RED R
WHITE L
REAR VIEW CAMERA
Description of Connecting the Parking Brake Line to the Parking Brake System Built in a Car
Parking brake
Parking brake wire(Green)
Parking brake switch
(inside the car)
To metallic body or chassis of the car
NOTE: after connecting the Parking Line, the video on the small monitor of the front panel will be display only after braking the car.
UNIT INSTALLATION
INSTALLATION INSTRUCTIONS
THE UNIT IS INSTALLED TO BE AN ANTI-THEFT ONE. THE CHASSIS
OF THE UNIT WEARS A SLIDING METAL HOUSING. PLEASE DO THE
CONNECTION OF THE POWER, SPEAKERS AND ANTENNA ACCORDING
TO THE REQUIREMENT OF THE INSTRUCTION BOOK , THEN INSTALL
THE SLIDING METAL HOUSING IN THE CAR AS FOLLOWS.
TO BOOST UP THE CAPABILITY OF
ANTI-JAMMING, PLEASE FIX THE
METAL STRAP ON THE METAL
CONNECTED TO THE BOTTOM
BRACKET OF THE CAR.
METAL STRAP
SELECT THE PROPER TAB
FOR FIXING THE SLIDING
METAL HOUSING.
UNIT CHASSIS
DASH BOARD
SLIDING METAL HOUSING
FRONT PANEL
TO DRAW THE CHASSIS OUT OF
THE SLIDING METAL HOUSING,
INSERT THE LEFT AND RIGHT KEY
PLATES INTO THE RIGHT POSITION
OF THE 2 SIDES OF CHASSIS.
PLASTIC TRIM OUT
GENERAL KNOWLEDGE ABOUT REMOTE CONTROL
1. Removing insulating sheet
If using remote control for the first time, you
can see an insulating sheet at the bottom
side of remote control as right.
you must remove the insulating sheet as right.
Otherwise, the remote control is disabled.
2. Replace lithium cell
If the electric energy of lithium cell is weak,
replace it.
1) Press and hold the movable block as direction
indicated by arrow 1 as right, at one time pull
cell holder out of remote control as direction
indicated by arrow 2 as right.
2) Replace the old cell by a new one with (+)
polarity side upward as right.
3) Insert the cell holder into remote control again
as right.
3. Note about using remote control
1) You should face the emitting window of remote control towards the sensor
window of the unit.
2) Operation angle for front panel: About 30 degree
3) The distance between the emitting window of remote control and the sensor
window of the unit : < 5M .
4. Warning for lithium cells of remote control
1)Cell leakage may cause damage to remote control.
2)Do not throw cells into fire, it may cause explosion.
.
3.To avoid risk of accident, keep cells out of reach of children.
Remote Control Description
3
27
35
1
1. ANG BUTTON
2. MENU BUTTON
4
14
3. POWER BUTTON
2
29
33
32
6
9
4. ^ BUTTON
5. >>| BUTTON
8
34
5
6. > BUTTON
7
7. |<< BUTTON
13
31
10
30
8. v BUTTON
11
40
41
12
24
16
28
15
18
21
22
17
26
9. SEL BUTTON
10. PLAY/PAUSE BUTTON
11. NUMBER(0~10,+10
-10) BUTTONS
12. 10+/PTY BUTTON
13. SETUP BUTTON
19
25
23
20
36
39
37
38
14. MODE BUTTON
15. APS BUTTON
16. SEARCH BUTTON
29. MUTE BUTTON
17. RDM BUTTON
30. STOP BUTTON
18. RPT BUTTON
31. VOLUME- BUTTON
19. SUBTITLE or BUTTON
32. < BUTTON
20. TITLE/PBC BUTTON
33. OK BUTTON
21. VIEW-ANGLE or ST/MONO BUTTON
34. VOLUME+ BUTTON
22. ZOOM BUTTON
35. BAND BUTTON
23. LANG/L/R/ST BUTTON
36. PROG BUTTON
24. CLOCK BUTTON
37. OSD BUTTON
25. A-B BUTTON
38. LOUD BUTTON
26. INTRO BUTTON
39. STEP BUTTON
27. EQ/OPEN BUTTON
40. TA BUTTON
28. LOC/DX or SLOW-FWD BUTTON
41. AF BUTTON
Locations and Names of Controls on or in the unit
11 8 18 19
2 10
3
2
1
TA / AF
OPEN
- VOL +
MODE
BAND
REL
APS
IR
MUTE
1
2 INT
3 RPT
4 RDM
5 -10
6 +10
AUX
SEL
9 12 15
13
16 17 14
22
23 4
6
Front Panel
SD/MMC
20
21
5
7
The Front Facet after removing front panel
1. OPEN button
2. POWER/MUTE button
3. Monitor
4. AUX socket
5. Disc Slot
6. USB Jack
7. SD/MMC Card Slot
8. MODE button
9. SEL button and VOL knob
10. ^ button
11. v button
12. PLAY/PAUSE/1 button
13. INT/2 button
14. RPT/3 button
15. RDM/4 button
16. - 10 / 5 button
17. + 10 / 6 button
18. BAND button
19. APS button
20. EJECT button
21. RESET button
22. Small LCD Screen
23. IR Remote Sensor
24. REL button
25. TA/AF button
24
Common Operation
1. To turn on/off the unit
In power off mode, short press any buttons except REL to turn on the unit.
In power on mode, long press the POWER button on the front panel or short press the
POWER button on the remote control to turn off the unit.
2. To slide the monitor of the Car Audio System out of the chassis
Shortly press the OPEN button on the front panel or long press the OPEN button on
the remote control can slide the monitor of the Car Audio System out of the chassis or
slide it into the chassis.
3. To adjust the angle of the monitor
press the ^ or v button on the monitor to adjust the angle
of the monitor.
4. To select function mode
Press the MODE button to select RADIO, DISC (After
inserting a disc), USB(After inserting a USB storage),
SD/MMC CARD(After inserting a SD/MMC card), AUX ,
or iPod mode.
In any mode, tapping the
icon (after popping up Keyboard interface for disc/USB/card) can pop up Mode
Menu 1 as right image, then touch and hold any place
and slide leftward to display the Mode Menu 2 and Mode
Menu 3 . finally tap one icon in the Mode Menus to enter
your desired mode.
5. To adjust sound level
Rotate the VOL knob on the front panel or press and
hold the + or - button on the remote control will adjust
the volume level.
Mode Menu 1
Mode Menu 2
6. To adjust audio and turn on or off the touch screen
Press the SEL button continuously to switch between
VOLUME, BASS, TREBLE, BALANCE and FADER.
after switching on a desired audio mode above, rotate
the VOL knob on the front panel or press or hold the
VOL+ or VOL- button on the remote control to set it.
Long press the SEL button to turn on/off the touch screen.
7. To mute sound
Mode Menu 3
Press the MUTE button on the remote control to turn
on/off MUTE mode.
Pressing the POWER button on the front panel shortly also can turn on/off MUTE mode.
8. To display clock time
Press the CLK button to display clock time on the monitor screen.
After sliding the monitor into the chassis, pressing the CLK button can display clock
time on the small LCD.
9. To select a desired EQ mode
Press the EQ button on the remote control to select one of the preset music equalizer
curves: POP, ROCK, CLAS, FLAT. The sound effect will be changed.
10. To turn on/off LOUD mode
Press the LOUD button on the remote to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when bass is not
enough.
11.To remove the front panel
press the REL button to flip down the front panel from
the main unit, then hold the right end of the front panel
to push leftward and pull away.
12.To reset the player
When the monitor , the small LCD display or some
buttons are not working or sound is distorted, remove
the front panel, then press the RESET button to reset
the program to factory default.
Audio Setting
13.To calibrate the screen
To pop up Calibration interface during media playback,
first press the STOP button, then press the ZOOM button,
finally press the ^ and v buttons in turn.
In the interface, you can have calibration by accurately
tapping the cross cursor.
14.AV Setting
In the Mode Menu 2 screen, tapping the AV Setting icon
can pop up the AV Setting interface as right.
Video Setting
In the AV Setting interface, tapping the Audio or Video
icon can switch between Audio Setting and Video Setting
interface.
In these 2 interfaces, tapping the
one item of them.
or
icon can set
In the Audio Setting interface, you can set the value of
the VOLUME, BASS, TREBLE, BALANCE and FADER.
the 1st Page of the General Setting
In the Video Setting interface, you can set the value of
the BRIGHTNESS, CONTRAST, SATURATION and HUE.
15.General Setting
In the Mode Menu 2 screen, tapping the Setting icon can
pop up the 1st page of the General Setting. Then tapping
one icon in the bottom row can pop up the other pages.
In these pages, tapping the
or
icon can select a
setting item. After selecting a setting item, tap its value
to set it.
the 2nd Page of the General Setting
In the 1st page, you can set the WALLPAPER, LOGO
and BEEP.
In the 2nd page, you can set the CLOCK MODE, TIME,
YEAR, MONTH and DAY.
In the 3rd page, you can set the DBAS, MBP, LOUD, EQ
and REVERSE VOI.
the 3rd Page of the General Setting
the 4th Page of the General Setting
the 5th Page of the General Setting
the 6th Page of the General Setting
In the 4th page, you can set the ASPECT RATIO, BRIGHNESS, CONTRAST, SATURATION and STANDARD VIDEO.
In the 5th page, you can set RADIO REGION.
In the 6th page, you can calibrate the screen.
16. Backlight Setting
In the Mode Menu 2 screen, tapping the Backlight icon
can pop up the Backlight Setting interface.
In the interface, tapping the - or + icon can set the
backlight.
the Backlight Setting interface
17. Function setting and application for Steer buttons
In the Mode Menu 2 screen, tapping the Steer icon can
pop up the Steering Control interface.
In the interface, tapping the
icon can restore the
user settings to zero and display Please press steer
the 1th key function , then long press the 1st button
in the steer to display Please choose steer the 1th
key function , tap one function icon in the Steering
Control interface such as vol-.
the Steering Control interface
Set the functions of the other steer buttons as the underlined step above.
After finishing function setting of all steer buttons , tap the
icon to save.
CH- and CH+ : In radio mode, to select previous or next memory station.
Seek- and Seek+ : In disc/USB/card mode, to play previous or next track/
chapter; In radio mode, short press to manually tune down or up for a desired
station, long press to automatically search down or up for an available station.
BTAns. : To receive a coming telephone.
18. Radio Rear Setup
In the Mode Menu 3 screen, tapping the Radio Rear
Setup icon can pop up the Radio Rear Setup interface.
In the interface, tapping the AV, DVD, USB, SD or iPod
icon can enter the background audio output mode of
the AV, DVD, USB, SD or iPod and pop up the foreground radio interface as next page.
the Radio Rear Setup interface
The icons in the foreground radio interface describe
as follows:
: To return to the Radio Rear Setup interface.
< and > : To automatically search up or down for
an available station.
CH- and CH+ : To manually search up or down for
a desired station.
CH-
CH+
the Foreground Radio interface
19. Change Color of the LCD
In the Mode Menu 3 screen, tapping the CC LCD icon
can pop up the CC LCD interface.
In the interface, tapping the
or
icon can change
the color of the LCD. When the RED word change to
CUSTO, tapping the - or + icon can set the value of the
R, G and B.
Radio Operation
the CC LCD interface
1. To enter RADIO mode(MODE button or RADIO icon)
When you use MODE button or Mode Menu 1 (tapping
RADIO icon) to enter RADIO mode, it will display Radio
interface 1 as right.
In the Radio interface 1, tapping the MENU icon can pop
up the Radio interface 2 as right.
In the Radio interface, tapping the
icon can pop up
the Volume interface 3 as right. In the Volume interface,
tapping the - or + icon can adjust the volume level.
*
RADIO interface 1
The functions of the icons in the radio interface are same
as the same buttons in the remote control or in the main
unit.
2. BAND BUTTON
In RADIO mode, press the BAND button on the remote
controller or on the front panel to select your desired radio
band of FM1, FM2, FM3, AM1 and AM2, and the selected
band will be displayed on the small monitor on the front panel.
RADIO interface 2
3. TUNE/SEEK UP/DOWN BUTTONS
In RADIO mode:
1) Long press the >>| or |<< button to automatically search up
or down for a available station from the current frequency.
2) Briefly press the >>| or |<< button to manually search up or
down with step by step for your desired station from the
current frequency.
RADIO interface 3
4. APS BUTTON
In RADIO mode:
1) When long pressing the APS button, the radio searches from the lowest frequency and
checks the signal strength level until 1 cycle search is finished. And then the 6 strongest
stations are preset to the corresponding preset number memory bank. The AS operation
is implemented in each bank of the selected band. (It can store 3x6 stations for FM and
2x6 stations for AM)
When the AS operation is finished, it will scan each preset station for 5 seconds in FM or
AM band from M1 when APS button is pressed briefly. After the scanning is finished,
broadcasting will resume on the M1.
2) When pressing the APS button briefly, the radio will scan each preset station for 5
seconds in FM or AM band from M1. After finishing a circle of scanning, it will resume
broadcasting on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time; In AM band, AM1, AM2 is
checked one at a time.
5. PRESET STATION [ 1-6 ] BUTTONS
In RADIO mode:
1) To memorize the current frequency on the current band, long press any of the number
buttons (1-6) on remote control or on the front panel .
2) To recall the preset memory on the current band, briefly press one of the preset buttons
[1-6] on remote control or on the front panel.
6. STEREO/MONO BUTTON
Press the ST button on the remote control to select the STEREO or MONO sound mode
for FM band.
7. LOC BUTTON
1) In RADIO mode, when the signal of the distance radio station is very weak and the
receiving effect is bad during tuning. If there is the word LOC on the monitor, press this
button to turn off the LOC function, then tune again for the distance radio station;
2) In RADIO mode, when the signal of the local radio stations are too strong and the interference doesn t allow the tuner to lock on stations, press this button to turn on the LOC
function to display the word LOC on the monitor, then tune again for the local radio
stations.
8. PTY (PROGRAM TYPE) BUTTON
Press the PTY button shortly to select one of the following mode:
PTY MUSIC group- - PTY SPEECH group -- OFF
When PTY group is on, press the VOL+ or VOL- button on the remote control or rotate
the VOL knob on the front panel to select one of PTY programs as follows:
<-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE<-->DRAMA<-->CULTURE
<-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE<-->CHILDREN<-->SOCIAL
<-->RELIGION<-->PHONE IN<-->TRAVEL<-->LEISURE<-->DOCUMENT< -->PTY
NONE<-->POP M< -->ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M
<-->JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<-->
When PTY group is on, pressing the 6 number buttons also can select one of PTY
programs as above.
After selecting one of the PTY programs, it will display SEEK PTY and automatically
search for the station of the PTY program. If the station of the PTY program does not
exist, it will display PTY NONE and then return back to the normal station.
9. AF [ALTERNATIVE FREQUENCIES] BUTTON
When short press the AF button on remote control or long press the TA/AF button on the
main unit, the AF switching mode is selected and the status of the AF switching mode is
displayed by AF segment on the display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When the AF switching mode is selected, the radio checks the signal strength
of the AF all the time. The interval of checking time of each AFs depends on
the signal strength of the current station, from a few minute for the strong
station to a few seconds for the weak station. Every time when a new AF is
stronger than the current station, it switches over to that frequency for very
short time, and the NEW FREQUENCY is displayed for 1-2 second. Because
the mute time of the AF switching or the checking time is very short, it is almost
inaudible in case of normal program. (When AF flashes on the monitor, it will
search for the stronger RDS station. If AF and TP flash on the monitor, it can
only search for the traffic announcement station).
In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY functions can
only receive and save the RDS program.
10. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button on the remote control or press the TA/AF button on the
main unit to turn on TA search mode.
When traffic announcement is transmitted:
1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.
2).Temporarily switches over to an station with traffic announcement, and TA,
TP will be displayed on the monitor.
* TA interruption function:
The current traffic announcement is cancelled by pressing TA button briefly.
* When TA is on, SEEK, (SCAN), AUTO MEMORY functions can be received
or saved only when traffic program identification code has been received.
Disc, USB and Card Operation
1. Load/unload disc , USB or Card
To play files in a disc, press the REL button to flip
down the front panel, then insert the disc into the
disc slot and flip up the front panel and push it onto
the chassis till click, then it will automatically play .
To remove the disc from the unit, press the REL
button to flip down the front panel, then press the
EJECT button to eject disc from the disc slot and
then you can remove it.
The File Playing interface
To play files in a USB storage, firstly insert the small
end of a USB cable into the mini USB port, then insert
the USB storage into the big end of the USB cable,
finally it will automatically play. The front and rear
USB can not be played at the same time.
To remove the USB storage, directly remove it.
To play files in a SD/MMC card, firstly remove the front
panel, then insert the SD/MMC card into the SD/MMC
card slot, finally it will automatically play.
To remove the SD/MMC card from the SD/MMC card
slot, remove the front panel, push in the card and then
pull it out of the Card Slot.
The Files List of the Playing Folder
* It supports version 1.1/2.0 USB and 8 GB SD CARD.
Remark1: If the disc, USB or SD/MMC card includes
MP3 or WMA files, after loading, it will display the
File Playing interface as right.
If you want to check the diretory, tap the
icon to
display the Files List of the Playing Folder, the
Folders List of the Playing File Format or the Root
interface.
The Folders List of the Playing File Format
If the disc, USB or SD/MMC card includes MPEG4 or
Picture files, after loading, the screen will play video.
tap any place in the screen to display Keyboard and
then tap the
icon to pop up the Files List of the
Playing Folder, tap the
icon to pop up the Folders
List of the Playing File Format or the Root interface.
In the Files List or Folders List interface, tapping the
or
icon can file or folder up or down.
The Root interface
Tapping the icon of the file, folder or file format can enter it.
In the root interface, the Music icon is for audio files; the Video icon is for image
files; the Picture icon is for Video files. If there are not any files for Music, Video
or Picture, you can not enter it.
In the File Playing interface, tapping any place in the
rectangle of the screen can pop up the Keyboard-1
of MP3/WMA, then tapping the
icon can pop up
the Keyboard-2 of MP3/WMA.
Remark2: After loading a CD disc, the screen will
display the CD interface as right. In the CD interface,
tapping the
icon can pop up the number interface and use the icons of the number, <-- and OK to
select a desired track to play; use the
or
icon
to track up or down. In the bottom row of the CD
interface, it is the Keyboard-1 of CD, tapping the
icon can pop up the Keyboard-2 of CD.
Remark3: During video or image playback, tapping any place on the screen can pop up the keyboard-1 of Video/Picture as right. then tapping
the
icon can pop up the Keyboard-2 or Keyboard-3 of Video/Picture as right.
*
The Keyboard-1 of MP3/WMA
The Keyboard-2 of MP3/WMA
In any work mode, tapping the progress bar can
change the current start point.
All function icons are described as follows:
: Same as
button.
: Same as
button.
or
: Same as
or
button.
or
: Same as
or
button.
The Keyboard-1 of CD
: Tapping it can pop up the Volume Bar and tap
the Volume Bar to adjust the volume level.
: Same as INT button.
: Same as LANG or L/R/ST button
: Same as PBC or MENU button.
: Same as TITLE button.
The Keyboard-2 of CD
: Same as REPEAT button.
: Same as SUBTITLE button.
: tapping it can pop up the number interface and
The Keyboard-1 of Video/Picture
use the icons of the number, <-- and OK to select
a desired track or chapter to play
: Same as the < / > / ^ /v button on RC.
The Keyboard-2 of Video/Picture
: Same as zoom button.
: Same as RDM button.
: Same as ANGLE button.
The Keyboard-3 of Video/Picture
2.
Pause Playback
When playing DVD/VCD/CD/MP3/WMA , press the PAUSE button on IR
remote control to pause the playback, press the PLAY button to resume
normal playback.
3. Stop Playback
When playing DVD/VCD/MP3/WMA/CD , press the STOP button once to
pause the playback, then press the PLAY button to resume the normal
playback; press the STOP button twice to full stop the playback, then press
the PLAY button to start playing from the beginning of the first chapter/track.
4.
Select Chapter/Track with the >>| or |<< Button
During playback, press the >>| or |<< button to select the next or previous
chapter/track to playback.
Note: Press the >>| or |<< button multiple times to advance multiple chapters
/tracks forward or backward.
5.
Select Chapter/Track with the Number Buttons
When playing DVD/VCD(PBC OFF)/MP3/WMA/CD , press one of the 1~9
and the 0/10 number buttons to directly select and play the 1st to 10th track
/chapter (the 0/10 button is used as the 10 button).
If you want to play the track/chapter larger than 10, use the 10+, 1~9 and
0/10 button. Example 1: to play the 13th track/chapter, first press the 10+
button once, then press the 3 button. Example 2: to play the 34th track/
chapter, first press the 10+ button 3 times, then press the 4 button.
(The 0/10 button is used as the 0 button)
Note: long pressing the +10 or -10 button can play the next 10th or previous
10th chapter/track(only for MP3/WMA).
6.
Select Chapter/Track with the Root/PBC Menu (If the disc includes the
root/PBC menu)
When playing DVD
1.
Press the TITLE button on the remote control to display the title list.
2.
Press the direction buttons to select your desired title, and then press the OK
or PLAY button to open the root menu of the selected title.
3.
Press the direction buttons to select your desired chapter, finally press the
OK or PLAY button to play the selected chapter.
During playback, pressing the MENU button can directly display the root
menu of the title that is playing.
In VCD mode
1. When starting to turn on the PBC function, it will play from the beginning of
the disc till it display the PBC menu on TV screen if the disc include the PBC
menu.
2. Press the number buttons to select your desired track to play.
In MP3/WMA mode
1. The root menu is displayed on the monitor screen all the time(and the TITLE
or MENU button is not available).
2. Press the direction buttons to select your desired FOLDER, then press the
OK or PLAY button to open the FOLDER, and then press the direction buttons
to select your desired file, finally press the OK button to play the selected file.
In CD mode, the TITLE, PBC, MENU buttons are disabled.
7. Playback with Speed
During normal playback, long press the >>|/|<< button continuously to fast
forwards or backwards at the following speeds: x2, x4, x8, x20, normal.
During speed playback, press the PLAY button to resume normal playback.
8. Playback with Slow Speed
During playback , press the SLOW_FWD button to execute the Slow Forward
function.
With each consecutive pressing of the SLOW_FWD button, the playback
speed decreases. The speed levels in Slow Forward as follows:
x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal.
During slow forward, press the PLAY button to resume normal playback.
This function is only for video.
9.
Display still frame step by step
If the unit is currently playing video, press the TEL button consecutively
to display still frame step by step.
Press the PLAY button to resume normal playback.
10. Playback Repeatedly
10.1 ONE/ALL Repeat
1.
In the mode of DVD playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL
or REP OFF.
2.
In the mode of VCD(PBC OFF)/CD playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button are not available.
3.
In the mode of MP3/WMA playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.
10.2
A-B Repeat
Press the A-B button if you want to repeat a specific segment on a disc
that you define:
1.
Press the A-B button at a point (A) where you want it to be the start point
of the repeat segment. Press the A-B button again at a point (B) where you
want it to be the terminal point of the repeat segment. Then it will play the
segment repeatedly.
2.
To cancel the A-B repeat mode and resume normal playback, press the A-B
button for the third time.
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the
same track.
During DVD playback, points A and B can be selected from different chapters.
11. Playback in Scan Mode
1. When playing VCD(PBC OFF)/CD , press the INT button to play the previous
15 seconds part of each track on the disc. Press the INT button again to
resume normal playback.
2. When playing DVD/MP3/WMA , the INT button is not available.
12. Playback from a specified chapter/track or a specified time
1. When playing DVD , press the SEARCH button to display a interface and
highlight the title item, then use the number buttons to input the serial number
of the title; use the direction buttons to highlight the chapter item, then use
the number buttons to input the serial number of the chapter; you can still use
the direction buttons to highlight the time item, then use the number buttons
to input the desired time to start playback; finally press the OK or PLAY button
to play the selected chapter or play from the selected time.
2. When playing VCD/MP3/WMA/CD , press the SEARCH button to display a
interface and highlight the track item, then use the number buttons to input
the serial number of the track; you can still use the direction buttons
to highlight the time item, then use the number buttons to input the desired
time to start playback; finally press the OK or PLAY button to play the selected
track or play from the selected time.
13. Playback in Random
When playing DVD/VCD(PBC OFF)/MP3/WMA/CD , press the RDM button to
switch between RANDOM (ON)/RANDOM OFF. When in RANDOM (ON) mode,
it will play in random.
14. Playback in Different View-Angle
1. When playing VCD/MP3/WMA/CD , the VIEW-ANGLE button on the IR remote
control is not available.
2. When playing DVD , press the VIEW-ANGLE button repeatedly on the IR
remote control to view in different angle.(This function is only for the DVD
media with ANGLE function)
15. Playback in Zoom Mode
In video/image mode, during playback, press the ZOOM button continuously
to enlarge a certain area of the images on the screen with these multiples:
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
16. Change Caption Language
When playing DVD , press the SUBTITLE button repeatedly to select the
language of the caption or turn off the caption.(depend on the media used.)
When playing VCD/MP3/WMA/CD , the button is not available.
17. Change Audio Language
1. When playing DVD , press the AUDIO button repeatedly on the IR remote
control to select the desired language type. (depend on the media used)
2. When playing VCD , press the AUDIO button repeatedly to select the sound
mode of the MONO L, MONO R, MIX MONO and Stereo, no language function.
3. When playing CD/WMA/MP3 , the AUDIO button is disabled.
18. Change Video Signal System
During playback of DVD/VCD , press the BAND(P/N) button on the front
panel or on the remote control repeatedly to change the VIDEO SIGNAL
SYSTEM mode .
19. Look over Playback Status
1. When playing DVD , press the OSD button repeatedly on the remote control
to turn on/off the playback status. When it is on, it will display the information
such as: the serial number of the playing title, the serial number of the playing
chapter, the elapsed time of the playing chapter, the remained time of the
playing chapter, the elapsed time of the playing title, the remained time of the
playing title, etc.
2. When playing VCD/CD , press the OSD button repeatedly on the remote control
to turn on/off the playback status. When it is on, it will display the information
such as: the serial number of the playing track, the elapsed time of the playing
track, the remained time of the playing track, the elapsed time of the disc, the
remained time of the disc.
3. When playing MP3/WMA , press the OSD button repeatedly on the remote
control to turn on/off the playback status. When it is on, it will display the
information such as: the serial number of the playing track, the elapsed time
of the playing track, the remained time of the playing track.
20. Program Playback
It allows you to enter the order in which you want some chapters/tracks in
DVD/VCD/MP3/WMA/CD to play.
1 During playback, press the PROG button to enter a program interface as
follows:
for DVD/MP3/WMA
for VCD/CD
2 Use the direction buttons to move cursor onto the desired place for inputting
the sequence number.
3 Use the number button to input desired sequence number of title/chapter/
track with desired sequence.
4 Use the direction button to move cursor onto Play item, then press the OK
button to play the programmed titles/chapters/tracks in programmed order;
only pressing the PLAY button also can play the programmed titles/chapters
/tracks in programmed order.
* To exit program playback, first press the STOP button, then press the PLAY
button to enter sequence playback; or press the PROG button twice again.
* To remove all the programmed sequence numbers, move the cursor onto
empty item, then press the OK button.
* To change the programmed sequence, move the cursor onto the item you
want to change, input the desired sequence number.
* During VCD playback, if it is in PBC ON mode, at the same time of entering
the state of program playback, it turns off PBC mode.
21. Playback IMAGE files
1. The root menu is displayed on the monitor when beginning to switch on IMAGE
mode. .
In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort
icon is for JPEG file; the right file sort icon is for VIDEO file. If one of these 3
file sort does not exist, you can not move cursor onto the file sort icon.
2. When displaying the root menu, press the direction buttons to select your
desired FOLDER, file or file sort icon, then press the OK or PLAY button to
open the FOLDER, or play the selected file, or play only this sort of file.
When displaying the root menu, you can also use the number buttons to
select the serial number of the file and play the file.
When you select the JPEG file sort icon, press the ^ or > button to select the
first JPEG file, then press the v button to select the desired JPEG file, finally
press the OK or PLAY/PAUSE button to display the JPEG picture in full screen
from the selected JPEG picture.
3. During JPEG playback, press one of the >/</^/v buttons to change the angle of
viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During JPEG playback, press the PROG button to change the mode of refresh picture.
During JPEG playback, press the STOP button to stop playing and return to the root
menu.
*
*
During JPEG playback, the following buttons are not available: SLOW-FWD,
SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
In JPEG mode,the other operations are same as ones in MP3/WMA mode.
22. Playback MP4 files
1. The root menu is displayed on the monitor when begins to switch on MP4 mode, then
it will automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER ,file or icon, then press the OK or PLAY button to open or play the selected
file.
When displaying the root menu, you can also use the number buttons to select the
serial number of the file to play the file.
*
*
The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.
The other functions are same as ones in DVD mode; but the RPT function is same as
one in MP3/WMA mode.
23. ESP and ID3 Function
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the file name, folder name,
song title, artist and album will be scrolling on the LCD display. As long as the
current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display.
24. DVD System Menu Setup Operation
1. Press the SETUP button on the remote control to access the DVD System Menu on
the monitor.
2. There are 6 setup pages for the System Menu. Press the > or < button to select
desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a
desired mode of the setup item, finally press the OK button to confirm it.
*
*
Press the < button to return to the previous level.
Press the SETUP button again or use the direction buttons to highlight EXIT SETUP
and then press the OK button to exit the Setup Menu.
For the DVD System Menu, there are 6 setup titles. They display as follows:
24.1 SYSTEM SETUP
TV TYPE
The setup item is for matching monitor screen size.
4:3 PS: Choose this item when connecting a monitor with 4:3 screen. When playing
the pictures with 16:9 size, the left and right parts of the image will be cut out,
and display in full screen.
4:3 LB: Choose this item when connecting a monitor with 4:3 screen. When playing
the pictures with 16:9 size, the top and bottom parts of the monitor will be
turned into a black strip.
16:9: Choose this item when connecting a monitor with 16:9 wide screen.
PASSWORD
This setup item is for locking or unlocking the rating level of the Parental Control.
The defaulted state is locked. The defaulted password is 0000.
You can set a new password that you like: Select the PASSWORD item and then
press the > button to enter it, then input the original password 0000, and then
press the OK button to unlock it. Press the > button to enter it again, then input
a new password that you like and then press the OK button to make it effective.
Before the other persons see the Manual, you should get the password in mind
and cut out the part of PASSWORD in the Manual.
RATING
This item is for setting a new rating level of the Parental Control.
1. Select the PASSWORD item and press the > button to enter it, input the
password mentioned above, and press the OK button to unlock the setting of
the rating level of the Parental Control.
2. Select the RATING item and press the > button to enter it, use the direction
buttons to select your desired rating level, press the OK button to confirm.
3. Select the PASSWORD item again and press the > button to enter it, input the
password, and press the OK button to lock the new setting of the rating level
of the Parental Control.
DEFAULT
Selecting DEFAULT will change all the settings to original factory setup.
24.2 LANGUAGE SETUP
OSD LANGUAGE
This item is for selecting the language of the SYSTEM MENU and all operating
prompt interface displayed during playback.
AUDIO LANG
This item is for selecting a audio language.
SUBTITLE LANG
This item is for selecting a subtitle language.
MENU LANG
This item is for selecting a disc menu language.
24.3 AUDIO SETUP
KEY
It is for selecting your desired basic music tone(from low to high).
24.4 VIDEO SETUP
BRIGHTNESS
It is for adjusting the brightness of the video output.
CONTRAST
It is for adjusting the contrast of the video output.
HUE
It is for adjusting the hue of the video output.
SATURATION
It is for adjusting the saturation of the video output.
SHARPNESS
It is for adjusting the sharpness of the video output.
24.5 SPEAKER SETUP
DOWNMIX
It is for selecting your desired sound effect when there is not central speaker
and sub-woofer. There are 3 mode: LT/RT, STEREO, VSS.
LT/RT: When playing a disc with PRO LOGIC stereo effect, choose the item,
so it will output audio signal with vivid theatre effect.
STEREO: If you choose this item, when outputting audio signal with 5.1 channels,
it will output the left and right channels of signal ; when outputting audio signal
with 2 channels, it will output the common 2 channels of stereo signal.
VSS: If you choose this item, when playing a disc recorded with 5.1 channels,
the main channel speakers can output audio signal with VSS effect.
24.6 DIGITAL SETUP
DYNAMIC RANGE
After selecting the compression mode of LINE OUT, set the item, so you can
adjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peak
value of the audio signal is the minimum; if you set it to be OFF, the Peak-toPeak value is the maximum.
DUAL MONO
It is for selecting a desired audio output mode for the left and right ways of signal.
It is mainly for Karaoke of Ac3. There are 4 modes in all as follows:
STEREO, MONO L, MONO R, MIX MONO.
AUX IN operation
An external AV system can use the car AV system as monitor and amplifier.
1. Use an AV cable to make the car AV system and the external AV system
connected through the AUX IN jack on control panel(audio only) or the AV
IN jacks from the rear cabinet of the car AV system and the AV Out jacks of
the external AV system.
2. Play the external AV system, then use MODE button or the Mode Menu to
enter AUX IN mode for the car AV system. By now, the program played by
the external AV system can be output through the monitor of the car AV
system and the speakers connected to the car AV system.
3. In AUX IN mode, you can use SEL, VOL, MUTE, EQ and LOUD buttons to
adjust audio .
REAR VIEW CAMERA
The car AV system can make you look at the actual status behind your car when
you change the gear level to the back position.
1. Use an video cable to make the car AV system and the rear view camera connected through the REAR CAMERA INPUT jack in the rear cabinet of the car AV
system and the VIDEO OUTPUT jack of the rear view camera.
Make the REAR CAMERA SWITCH line in the rear cabinet of the car AV system
connected to (B+)12V power supply.
2. In any running mode, the video signal will switch to camera mode (if applicable)
when car is in reverse.
After taking the car out of reverse, it will resume to its previous mode.
PIC
ANGLE
Analog on-site backup
*
Analog on-site backup
Note : the external monitor can not display the actual status behind your car.
Warning:
Always check the surrounding environment. Objects might be reversed. The rear view
camera is designed only to assist while reversing. Due to the limitations of the camera
angle and range, it may cause accidents if the driver relies solely on the reverse camera
and display.
iPod Operation
1. Enter iPod mode
When inserting the iPod plug into an iPod , it will enter iPod mode and display the
File Playing interface on touch screen as follows:
The File Playing interface
You can also use MODE button or Mode Menu to enter iPod mode.
2. Popping up the Keyboard
In the File Playing interface, tapping any place in the rectangle can pop up the Keyboard as follows:
the iPod Keyboard
The functions of the icons on the iPod Keyboard are same as ones of the icons on the
Keyboard of disc/USB/card.
3. Play audio files
During playback, tap the
as follows:
or
the iPod root
icon or press the
button to pop up the iPod root
the iPod root
Use the v, ^ and OK button or directly tap one of the items in the rectangle to play a
desired file in the iPod.
Trouble Shooting
Please read the user’s manual carefully before using the DVD player. If you have any troubles
in using this player, try to solve the problems by the suggestions mentioned below. If you can
not remove the trouble after using all the suggestions, please contact the company or the
technical service center authorized by us. For the sake of your safety, please do not open the
cover and repair the player by yourself, if that, it may cause electric shock.
NO PICTURE, SOUND AND INDICATION
* Ensure that the power switch is on.
* Ensure that the power cord is not damaged or the fuse is not blown.
* Ensure that the power plug is connected to the inlet tightly.
NO SOUND BUT HAVE PICTURE
* Ensure that the player’s audio output has a good connection with amplifier’s audio input.
* Check whether the audio connector is damaged.
* Check whether you have turned down the volume.
* Ensure that you have set the right AUDIO setup of the player.
* Ensure that the audio is not under muted.
NO PICTURE BUT HAVE SOUND
* Ensure that the player’s video output has a good connection with monitor’s video input.
* Ensure that you have turned your monitor to the AV input channel connecting to your player.
* Check whether the video connector is damaged.
* Ensure that you have set the right VIDEO settings of the player.
BLACK AND WHITE PICTURE OR SCREEN ROLLING
* Ensure that you have set the right TV SYSTEM (e.g. PAL, NTSC) setting.
FLAWS OF PICTURE OR SOUND
* Check whether the setting of AUDIO is right.
* Check whether the disc is scratched or stained.
* Check whether the AV connector and the output terminal is stained.
* Check whether there is condensation inside the Lens. If so, leave the player off for an hour
or so, then try again.
* Check whether the installation angle is less than 30°.
DISPLAY NO DISC OR BAD DISC
* Ensure that you have put the disc in the unit.
* Check whether the disc is put in the reverse side.
* Check whether the disc is distorted.
* Check whether the disc is stained or scratched badly.
* Ensure that the disc format is compatible to the player.
* Ensure that the temperature inside the car is not too high. If so, cool off till the ambient
temperature returns to normal.
* Replace another disc to insert it into the disc compartment.
REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK
* Check the batteries of remote control and make sure that they are powerful and have
good conductivity.
* Direct the remote control to the IR sensor of the player.
* Check whether there are some obstacles between the remote control and IR sensor.
SOME FUNCTION BUTTONS DO NOT WORK
* Turn off the power, then turn on again.
* Reset the unit to zero, then turn on again.
* Remove the front panel from the unit, then install it again and then turn on again.
THE RADIO DOES NOT WORK
* Check whether the antenna cable is connected firmly. Or manually tune for a station.
Specification
General Specification
Power Supply Requirement..................................................DC 12V
Maximum Power Output............4 x 80W(measured at DC 14.4 V)
Dimensions(w x h x d).....................................7”W x 2”H x 6.3”D
DVD Deck Specification
Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD
Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional)
Audio System..............................................................24 bit/96KHz
Loading System.......................................................... Auto Loading
Mounting Angle.................................................................0 to +/-30
Video Specification
Video Type...................................................................16:9 and 4:3
Video Output level......................................Composite:1.0± 0.2Vp-p
Load impedance: 75 ohms
Horizontal Resolution................................................................500
Audio Specification
Audio Output(Analog audio)..........................................2.0 +0 -1.0 Vrms
Frequency Response.............................20Hz ~ 20KHz(at 1KHz 0 dB)
S/N Ratio(Audio).............................................≥90dB(at 1KHz 0 dB)
Separation..............................................................................50dB
Radio Specification
FM Section
Frequency range.......................................87.5MHz - 107.9MHz(US)
87.5MHz - 108.0MHz(EU)
Usable sensitivity......................................................................3uV
I.F Frequency....................................................................10.7MHz
AM Section
Frequency....................................................530KHz - 1710KHz(US)
522KHz - 1620KHz(EU)
BOSS AUDIO CAR STEREOS
CAR AUDIO SYSTEMS
Download PDF