Daewoo SF-7300 Specifications

Daewoo SF-7300 Specifications
Important Safeguards
Product Information
DVD Operation
Important Safeguards ..................................................... 1
Advantages of This Product Are .... ............................ 4
Read Carefully before Using ......................................... 5
Identification of Controls ............................................... 6
Remote Control .............................................................. 10
Playing a desired scene ................................................ 35
Confirming the current PLAYING TIME.................. 40
Selecting an AUDIO language, SUBTITLE language
and 3D AUDIO ............................................................... 42
Selecting ZOOM and Multi Angle.............................. 44
About MP3 , JPG and DivX® discs............................ 46
Displaying menus in a disc........................................... 51
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Installation
Setting up your player................................................... 11
Connecting your player through extra equipment
(satellite system) ............................................................ 12
Connecting your player to the Hi-Fi system .............13
How to connect your player to another player,
How to connect your player to a camcorder ............ 14
Connecting Dolby Digital Amp with Digital Audio
Out Jack ........................................................................... 15
2nd Scart Socket ............................................................. 16
Basic Operation
Initial Installation ........................................................... 17
Setting time and date / Auto clock ............................ 18
OSD ON & OFF / Output Select ................................ 19
DVD Playback ................................................................ 20
VCR Playback ................................................................ 21
Recording ........................................................................ 22
Product information
Contents
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
Set-up
Language Setup .............................................................. 52
Video Setup ......................................................................54
Audio Setup..................................................................... 55
Others Setup ................................................................... 56
The others
About DVD...................................................................... 58
Basic information about VCR and Videotape.......... 61
Before doubting about troubles (VCR)....................... 62
Before doubting about troubles (DVD) ..................... 64
Specifications .................................................................. 65
VCR Operation
Tuning in New Stations ................................................ 24
Timer Recording ............................................................ 26
More Functions .............................................................. 29
Connections and Copying ........................................... 33
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
IMPORTANT FOR LASER PRODUCTS
• LASER :
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this instruction manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified
may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
• DANGER : Visible laser radiation when open and interlock failed or
CLASS 1 LASER PRODUCT
defeated. Avoid direct exposure to beam.
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
• CAUTION : Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
CAUTION: Any changes or modification in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
• Make sure the unit should be placed at least 8cm apart from the other home appliances or the
obstacles to get sufficient ventilation.
• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on this unit.
• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the
mains, you have to unplug it.
• The system is not completely disconnected from the mains when the / I button is set to
the position.
1
Downloaded From Disc-Player.com Daewoo Manuals
Important Safeguards
This set has been designed and manufactured to assure
personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in
this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit 9
is fully transistorized and does not contain any parts
that can be repaired by the user.
1
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the unit is operated.
2
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3
HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
4
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5
CLEANING
Unplug this unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6
7
8
Product
Productinformation
information
Important Safeguards
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
VENTILATION
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the unit
and to protect it from overheating. These openings
must not be blocked or covered. These openings
must not be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should
never be placed near or over a radiator or heat
radiator. This unit should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10 POWER SOURCES
This unit should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of power supply to
your home, consult your dealer or local power
company. For units intended to operate from
battery power, or other sources, refer to the
operating instructions.
11 GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating current line plug (a plug having one blade wider
ATTACHMENTS
than the other). This plug will fit into the power
Do not use attachments unless recommended by
outlet only one way.
the unit’s manufacturer as they may cause
This is a safety feature. If you are unable to insert
hazards.
the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your
WATER AND MOISTURE
electrician to replace your obsolete outlet.To
Do not use this unit near water- for example, near
prevent electric shock, do not use this polarized
a bath tub, wash bowl, kitchen sink or laundry tub,
plug with an extension cord, receptacle, or other
in a wet basement, or near a swimming pool.
outlet unless the blades can be fully inserted
without blade exposure. If you need an extension
PORTABLE CART WARNING
ACCESSORIES
cord, use a polarized cord.
(symbol provided by RETAC)
Do not place this unit on an
unstable cart, stand, tripod,
12 POWER-CORD PROTECTION
bracket, or table. The unit may
Power-supply cords should be routed so that they
fall, causing serious injury to
are not likely to be walked on or pinched by items
a child or adult as well as serious damage to the
placed upon or against them, paying particular
unit. Use this unit only with a cart, stand , tripod,
attention to cords at plugs, convenience
bracket, or table recommended by the
receptacles, and the point where they exit from the
manufacturer.
unit.
8A
A unit and cart combination should be moved
2
Downloaded From Disc-Player.com Daewoo Manuals
13 LIGHTNING
For added protection for this unit during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the unit due
to lightning and power line surges.
14 DISC TRAY
Keep your fingers well clear of the disc as it is
closing. It may cause serious personal injury.
15 OVERLOADING
Do not overload wall outlets of extension cords as
this can result in a risk of fire or electric shock.
16 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit
through openings as they may touch dangerous
voltage points or “short-out” parts that could
result in a fire or electric shock. Never spill liquid
of any kind on the unit.
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the unit to its normal
operation.
E. If the unit has been dropped or the cabinet has
been damaged.
F. When the unit exhibits a distinct change in
performance-this indicates a need for service.
21 REPLACEMENT PARTS
When replacement parts are required, have the
service technician verify that the replacements he
uses have the same safety characteristics as the
original parts. Use of replacements specified by the
unit manufacturer can prevent fire, electric shock,
or other hazards.
22 SAFETY CHECK
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks recommended by the manufacturer to
determine that the unit is in safe operating
condition.
17 BURDEN
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product. 23 WALL OR CEILING MOUNTING
The product should be mounted to a wall or
18 DISC
ceiling only as recommended by the manufacturer.
Do not use a cracked, deformed or repaired disc.
These discs are easily broken and may cause
24 HEAT
serious personal injury and product malfunction.
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
19 SERVICING
other products (including amplifiers) that produce
Do not attempt to service this unit yourself as
heat.
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
25 To prevent battery electrolyte leakage, which may
servicing to qualified service personnel.
result in injury and damage to the unit or other
objects, observe the following precautions:
20 DAMAGE REQUIRING SERVICE
A. All batteries must be installed with the
Unplug this unit from the wall outlet and refer
proper polarity.
servicing to qualified service personnel under the
B. Do not mix new with old or used batteries.
following conditions.
C. Only use batteries of the same type and brand.
D. Remove the batteries when they are not to be
A. When the power-supply cord or plug is
used for a long period time.
damaged.
E. When the batteries have become discharged,
B. If liquid has been spilled, or objects have fallen
they must be disposed of in a safe manner
into the unit.
which complies with all applicable laws.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating instructions. Adjust
3
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DVD, VCD, CD, CD-R(MP3), CD-RW, VHS
Watching DVD for recording broadcast
Integrated remote control (VCR, DVD)
VISS function
Multiplex sound playback/record
High Sound Quality of 6 head Hi-Fi
Simple record function
MP3/JPEG file playback function (CD-R
disc having records of MP3/JPEG files)
Function to play DivX files (disc recorded
with the .avi,. divx format.)
(Some of the discs may not be played
according to a DivX version. )
Screensaver function (DVD)
3D sound (3D sound effect using 2 speakers)
High bit/High sampling with 108MHz/12-bit
Video Encoder.
High bit/High sampling with Built-In Audio
DAC.
Coaxial digital Audio output (PCM, Dolby
Digital, dts)
You can enjoy high-level digital audio by
connecting with amp embedded with Dolby
Digital / dts decoder.
• Built-in Dolby Digital decoder (DVD)
• Analog audio 2-channels output for
DOWNMIX (x1)
• Composite video output (x1)
• Slow Forward / Reverse playback (DVD)
• Fast Forward / Reverse playback
• Search of title, chapter, and time in DVD
disc, and search of time and track time in
VCD.
• Various TV aspect (DVD)
• Selective Play (DVD/VCD/CD)
You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.
• 8 languages OSD(On Screen Display)
function(DVD).
You can select and display OSD in 8
languages.
• Parental Lock function (DVD)
Read Carefully before Using
Cautions in use of DVD-Video player are described
below.
Please read carefully before using a DVD-Video player.
that may be unsuitable for children.
• Multi Audio function (DVD)
The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or VCD, it
depends on the disc. (The number of audio
languages depends on the software.)
The subtitle can be seem in up to 32 languages.
✔
In the case of SVCD or VCD, it depends on the
disc. (The number of subtitle languages depends
on the software.)
• Multi Angle function (DVD)
This function allows you to choose the viewing
angle of scenes which were shot from a number
of different angles. (The number of angles
depends on the software.)
✔
• Screen zoom function (DVD/VCD)
✔
4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9
for Wide
• Repeat playback (title, chapter, and part for
DVD/ track, disc, and part for VCD/CD)
✔
4
Downloaded From Disc-Player.com Daewoo Manuals
and maintenance every 1,000 hours of use by
technical engineers.
• For checking, contact your dealer or your
nearest service center.
✔ Installation place and handling
This function can prevent playback of software
• Multi Subtitle function (DVD)
Product information
Advantages of This Product Are .....
✔ Checking and Replacement of Antenna
• When you place this player near other devices,
• Antenna is subject to change in its direction or
they may affect poorly together.
damage by wind and rain. For clean screen,
• When you place DVD-Video player and TV in
contact and consult your nearest service center
the upper and lower sides, it may cause
about checking and replacement.
flickering of pictures or failure (tape is not
✔ In recording important screen
ejected).
• Be sure to record the screen and check whether
• When you place this player near strong
recording is performed properly. We beg you
magnetic materials, it may affect image or voice
to understand compensation of recording if
poorly or damage recording.
recording is not performed by badness of used
• Do not spill volatile liquids like insect spray
tape or video.
over the player. Do not leave rubber or plastic
products in contact with the player for a long
✔ Copyright
time. They will cause deterioration or paint
• Do not use your recordings without permission
peel-off.
of a copyrighter except personal usage.
Not in use
✔ Tape and Disc Handling
• When the unit is not in use, be sure to remove
• Do not use any tape and disc below. Damage
the disc or tape and turn off the power.
of video head or cut/coiling of tape may cause
• If you do not use the unit for a long period,
failure.
remove batteries in remote control to prevent
Tape
with mold
leakage.
Tape
or disc stained with juice or attachments
• In case you don’t use the unit for a long time,
- Tape having breakage connection
the unit may not function properly in the
- Disassembled tape
future. Turn on and use the player occasionally.
- Disc with severe scratch
• Moisture condensation may occur in tape.
Moving
Moisture condensation damages the tape.
• Repack the unit as it was originally packed at
Please use the tape after the moisture
the factory. Alternatively, pack this product
condensation is disappeared.
with towel not to be damaged.
• After use, store tape vertically in a case to
• Eject any videotape.
prevent loose.
Cleaning
• Do not store the following places.
• Dust off dirt in cabinet or control panel part
- High temperature and humidity
smoothly with a soft cloth.
- Subject generation of mold
• For heavy dirt, soak the cloth in a weak
- Subject to direct sunlight
detergent solution, wring it well and wipe. Use
- Much dirt or dust
a dry cloth to wipe it out.
- Near strong magnetic materials such as speaker
• Follow instructions in using chemical cleaners.
• Do not use any type of solvent such as gasoline ✔ Video head cleaning
• Video head cleaning is needed when the
or benzene, as they may cause deterioration or
playback picture becomes unclear. Use an
paint peel-off.
equivalent high quality chemical non-abreasive
Checking
head cleaning tape or have them cleaned
• Video is a high precision device. To obtain a
professionally.
clear screen, we recommend regular inspection
5
Main body (front panel)
Product information
Identification of Controls
Identification of Controls
Operation Display Window
- RECORDING MODE Timer Recording Standby
Timer Recording Error
Recording in Progress
! POWER (STANDBY/ON) button
Use to power the device on/off if AC power
supply is connected.
@ Place to insert videotape
# Disc tray
$ VIDEO INPUT jack
% AUDIO INPUT jack
^ EJECT button
& RECORD button
* PR Down/Up button
( Operation Display Window
Display operation of device. For more information,
see “Operation Display Window” in 7P.
) SELECT button
Use to change DVD mode to VCR mode, and vice
versa.
1 STOP button
Use to stop playing.
2 REWIND button
Use to rewind currently being played videotape or
disc; or to playback back rapidly.
3 Playback/PAUSE button
Playback videotape or disc.
Press this button to pause a screen.
4 FAST FORWARD button
Use to wind currently being played videotape or
disc; or to playback rapidly.
5 OPEN/CLOSE Tray button
Timer Recording in
Progress
Recording Pause
- DVD OPERATION -
- VCR OPERATION -
DVD playback
VCR playback
Fast playback
Fast forward
Fast reverse playback
Rewinding
Slow playback
Fast playback (CUE)
Pause picture
Fast reverse playback
(REVIEW)
Slow playback
Still picture
Stop
Child Lock
6
Downloaded From Disc-Player.com Daewoo Manuals
7
Product information
Identification of Controls
Identification of Controls
Accessories
Main body (Rear Panel)
@
!
*
! POWER CORD
It is a jack for supplying power to the unit.
Connect to outlet in a wall.
#$
^
%
&
^ Connection to ANTENNA Cable
& Connection to TV
* EURO AV1 Jack
@ EURO AV2/DECODER Jack
# VIDEO OUTPUT Jack
$ AUDIO OUTPUT Jack
% DIGITAL OUTPUT (COAXIAL) Jack
2 Batteries
Instruction
Manual
RF cable
• To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But,
instruction manual is not sold additionally.
Instructions in using REMOTE
• Operate remote control within 7m from the unit.
• Do not press 2(two) buttons at the same time.
• Do not light up sending and receiving part of remote control.
• Do not keep in the place with much dust and humidity.
✔
Remote control battery installation
AAA
AAA
To enjoy sound quality of theatre level in home,
connect this jack with amp or unit embedded
with digital audio decoder.
Remote control
Detach the battery cover on the rear of the
remote control, and insert two AAA
batteries with the + and - ends aligned
correctly.
Two “AAA ” batteries
(optional).
✔ Disposal of Used Electrical &Electronic Equipment
The meaning of the symbol on the product, its accessory or packaging indicates that
thisproduct shall not be treated as household waste. Please, dispose of this equipment at your
applicable collection point for the recycling of electrical & electronic equipments waste. In the
European Union and Other European countries which there are separate collection systems
for used electrical and electronic product. By ensuring the correct disposal of this product,
you will help prevent potentially hazardous to the environment and to human health, which
could otherwise be caused by unsuitable waste handling of this product. The recycling of
materials will help conserve natural resources. Please do not therefore dispose of your old
electrical and electronic equipment with your household waste. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
8
Downloaded From Disc-Player.com Daewoo Manuals
9
Remote Control
!
[DVD] OPEN/CLOSE button, [VCR] EJECT button
@ VCR SELECT button
#
[DVD, VCR] NUMBER button, [VCR] TRACKING -/+
button
$ SYSTEM button (This button is not available for this set)
#
#
$
‘
%
+
=
&
*
(
)
1
2
3
4
5
6
7
8
^
Television
[DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel
Up/Down button
&
[DVD] TITLE /PBC button
*
[DVD] AUDIO LANGUAGE Select, [VCR] AUDIO Select
button
(
200-240V~,
50/60 Hz
[DVD] SUBTITLE Select button
) REVERSE SEARCH button
1 PLAY/PAUSE button
[DVD] PREVIOUS button (move into a previous chapter
or track)
3
[VCR] Record SPEED button
Q
q
W
4
[VCR] Record button
5
[VCR] TV/VCR button
6
[DVD] 3D button
w
E
e
R
r
T
t
Y
y
7
[VCR] CM SKIP
8
[VCR] Replay button
Back view of your player
Aerial
The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.
(Option 2) - Connecting your player through a scart lead
9 POWER button
Television
0 DVD SELECT button
“
[VCR] INPUT Selection button
‘ CLEAR button
+
[DVD, VCR] OSD DISPLAY button
= OK/ENTER button
Child Lock !
(Option 1) - Connecting your player through RF lead
% SETUP button
2
^
■ Before you start, unplug all the equipment from the mains supply.
Installation
@
9
0
“
!
Setting up your player
Q
[DVD] MENU button
q
[DVD] Chapter/Title/Time SEARCH button
W
[DVD] ZOOM button
w FORWARD SEARCH button
Aerial
200-240V~,
50/60 Hz
Scart lead (not supplied)
Back view of your player
E STOP button
Press the power [ ] button of the remote for about
5 seconds. No buttons of front panel can be operated
now and Lock indicator (“
”) will be
displayed on window display. To release child lock,
press any button of the remote control.
e
[DVD] NEXT button (Move into a next chapter or track) ,
[VCR] Frame Advance button in pause mode
R
[DVD] REPEAT Playback button
r
[DVD] REPEAT a defined period from A to B button
T
[DVD] ANGLE button
POWER ON
t
[DVD] MARK button
Player will be POWER ON if any button of the
remote control is pressed.
Y
[VCR][DVD] PROGRAM button
y
[VCR] LAST CHANNEL button (If you move channels
using the [PR+/PR-] button, return to the previous
channel which was being watched. )
10
Downloaded From Disc-Player.com Daewoo Manuals
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH ARD. “VCR” will be
displayed.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player with a scart lead.
11
Connecting your player through
extra equipment (satellite system)
Connecting your player to the Hi-Fi system
■ Before you start, unplug all the equipment from the mains supply.
Option 1
■ Before you start, unplug all the equipment from the mains supply.
Installation
Television
(Option 1) - Connecting your player through RF lead
Aerial
Hi-Fi
Television
200-240V~,
50/60 Hz
Plug a phone cable into the
“Audio L/R” sockets on the
back panel and into the audio
sockets on any audio
amplifier, if needed. If your
player does not have this
connection, see page 15.
Aerial
200-240V~,
50/60 Hz
Player
Back view of your player
You can also use a scart lead to improve picture and sound quality from your player.
Option 2
Satellite
Television
Aerial
Hi-Fi
You can use this connection if your player has two scart sockets. This will improve sound and picture quality
when you are recording from satellite.
200-240V~,
50/60 Hz
Plug a scart to phone cable into
the “AV1” socket on the back
panel and into the audio socket
on any audio amplifier, if
needed.
Player
12
Downloaded From Disc-Player.com Daewoo Manuals
13
How to connect your player to another player
■ Before you start, unplug all the equipment from the mains supply.
How to connect
How to connect
Installation
First player
Connecting Dolby Digital Amp
with Digital Audio Out Jack
200-240V~,
50/60 Hz
REAR PANEL OF DVD-VIDEO
Second player
1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front
display.
2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3) Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 16.
How to connect your player to a camcorder
CONNECTING CABLE
(Not supplied)
■ Before you start, unplug all the equipment from the mains supply.
How to connect
(L) AUDIO IN (R)
Television
200-240V~,
50/60 Hz
Aerial
Camcorder
1 Select COAXIAL to connect to amp of Dolby Digital.
to
camcorder
Player
Home Theater Receiver with Dolby Digital decoding capability
* If you want to know about “Dolby Digital”, please refer to [About DVD] in 58-60p.
Scart Plug
to TV
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are registered trademarks of Dolby Laboratories.
If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the
back panel of the player to the television. To use this function, see page 16.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
You can also connect the camcorder by using a phone cable if your player has front input sockets.
Check the front of your player for this connection, see page 16.
14
Downloaded From Disc-Player.com Daewoo Manuals
15
2nd scart socket
Initial Installation
■ Switch the TV on.
■ You can also start "AUTO SET" in the SETUP "PR PRESET" ➝ "AUTO SET".
■ To tune in new stations (manual tuning) and to enter station names see page 24-25.
2nd scart socket
If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 12-15.
2nd scart
INPUT ONLY
Setting up the player
1
You should see this picture the first time you switch on the TV
and player.
Choose your language.
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
PR+/-:SELECT
OK:CONFIRM
2
When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 12. When connected by this method if the equipment is turned off the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.
To return to normal video use the other equipment must be turned off.
Recording from other Equipment.
Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.
3
I: Italy
LUX: Luxembourg
N: Norway
NL: Netherlands
S: Sweden
SF: Finland
CH: Switzerland
TR: Turkey
OK for "AUTO SET!".
"AUTO SET" tunes in all the stations you can receive in your
country.
COUNTRY SET
B
N
D
NL
DK
S
E
SF
GR
CH
I
TR
LUX
OTHERS
PR+/-:SELECT
OK:CONFIRM
SETUP:END
CH 25
PLEASE WAIT...
Clock is automatically set.
SETUP:END
4
Front AV
If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on page 14.
B: Belgium
D: Germany
DK: Denmark
E: Spain
GR: Greece
SETUP:END
Basic Operation
INPUT+OUTPUT
Then choose your country.
For selecting the country, refer to the followings.
5
If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
RF OUTPUT SET
CURRENT
RECOMMENDED
CH 52
CH 54
0-9:SELECT(21-69)
OK:CONFIRM
SETUP:END
Press the [OK] button to confirm the recommended PR.
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 25.
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 54.
Else ...
exit the basic installation function and enjoy your player.
MANUAL SET
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
•
In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
16
Downloaded From Disc-Player.com Daewoo Manuals
PR01
PR02
PR03
PR04
PR05
PR06
PR07
ARD
ZDF
P-03
P-04
MTV
P-06
P-07
PR+/-:SELECT
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
17
Setting time and date
OSD ON & OFF
OSD (On Screen Display) ON & OFF
Setting time and date
■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
1
Call the player’s "SETUP",
choose "VCR SETUP", then "CLOCK SET".
This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it
to OFF mode.
CLOCK SET
TIME - - : - DATE - - / - - /- - - -
1
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
0-9:SETUP (HOUR)
/➝:CORRECT SETUP:END
PR+/-:SELECT
OK:CONFIRM
➝
Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.
CLOCK SET
TIME 06:05
2
Choose “VCR SETUP”.
And press the [OK] button.
DATE 08/08/2004(SUN)
Store with [OK] button and exit with [SETUP] button.
0-9:SETUP (HOUR)
/➝:CORRECT
OK:CONFIRM
SETUP:END
➝
3
Auto clock
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.
SETUP:END
Basic Operation
2
SETUP
Call the player’s "SETUP".
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM
SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM
SETUP:END
Output Select
Setting Auto clock
To Select DVD
■ Auto Clock is only available for models with the VPS/PDC function (see page 26).
Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will
automatically use this time and date during the initial setting up procedure during normal use, and every
time you switch the video off at the mains. If you find that this time and date is incorrect you can remove
this feature by following the steps below changing it to OFF mode, you will then have to manually set the
time and date, see above.
Press [DVD] button.
If DVD mode is correctly selected, DVD on the operation display
window is lit. Then, REMOTE button works as DVD function. Press the
[DVD] button, then the mode of DVD-Video Player becomes to the
OPERATION mode.
To Select VCR
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM
SETUP:END
AUTO CLOCK
ON
OFF
PR+/-:SELECT
OK:CONFIRM
Press [VCR] button.
If VCR mode is correctly selected, DVD on the operation display
window goes out. Then, REMOTE button works as VCR function. Press
the [VCR] button, then it becomes to the VCR OPERATION mode.
SETUP:END
To Select Watch Modes or External Input
Press [INPUT] button.
When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it
is not operated in PLAY, REC and DVD mode.
18
Downloaded From Disc-Player.com Daewoo Manuals
19
DVD Playback
1
2
4
5
6
] button to power on.
Press [DVD] button of REMOTE to change into DVD mode.
Press [OPEN/CLOSE] button to open the disc tray.
Place a disc firmly on the disc tray, making its label look upward.
Insert the disc and press [OPEN/CLOSE] button to close the tray.
The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.
To playback it, press [PLAY/PAUSE] button.
• In the case of DVD,
DVD menus and titles are displayed on TV screen.
• In the case of S-VCD and VCD2.0
the menus are displayed on TV screen and it is converted into PBC(Playback
Control) mode.
• In the case of CD, VCD1.1, MP3, DivX and JPG
the disc plays.
1
2
3
Press [ ] button to power on.
Press [VCR] button of remote control to change into VCR mode.
4
5
To stop it, press [
Insert the desired tape.
If you want to playback it, press [PLAY/PAUSE] button.
When the operational status is flickering or poor, adjust it with [TRACKING
+/-] button.
] button.
To stop, press [STOP] button in playback mode.
Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote
control to remove the tape.
Various Playback Methods
√√] or [œ
œœ ] button in
■ If you want fast forward (or reverse) playback, press [√
Playback mode. You can watch fast playing (rewinding) screen.
To stop it, press [ ] button.
To stop, press [STOP] button in playback mode.
* NOTE: You might see no color noise band when you fast forward (or reverse)
playback the tape which is recorded in LP mode.
■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch
the desired screen in pause status.
Press [OPEN/CLOSE] button to remove the disc.
√√] button in Pause mode. You can
■ If you want slow-motion playback, press [√
watch the desired screen in the slow forward playback.
Various Playback Methods
√√] or [œ
œœ ]button in
■ If you want fast forward (or reverse) playback, press [√
Playback mode. You can watch fast playing (reverse ) screen.
* This reverse playback can be unavailable for certain DVD.
√√] or [œ
œœ ] button in Pause mode.
■ If you want slow (or reverse) playback, press [√
You can watch the desired screen in the slow forward (reverse) playback.
* For the case of VCD and DivX, this reverse slow playback function is unavailable.
The
mark will appear.
■ If you want still picture, press [PAUSE] button in Playback mode. You can watch
the desired screen in Pause status.
20
Downloaded From Disc-Player.com Daewoo Manuals
Basic Operation
3
Press [
VCR Playback
If the product, which has
a auto-detector, detects a
contaminated head(s), it
shows the conditions to
notice the contamination
on screen.
* In case of the notice on
screen, please rub the
heads with a headcleaner followed by
“How to use a headcleaner”.
* NOTE: VCR doesn’t have Slow Reverse Playback function.
■ If you want to watch a series of screens one by one, (FRAME ADVANCE) press
[NEXT √√❚ ] button in Pause mode. Each time you press this button, the picture
advances one frame.
■ If you press [REPLAY] button in playback mode, the player quickly rewinds 15
seconds of the tape and plays it.
■ If you press [CM SKIP] button in playback mode, the player quickly skips 30
seconds of the tape and plays it.
To Adjust Display
This product includes automatic Tracking function and enables users to enjoy clear
picture without an additional operation. Provided that the following problems can be
solved by the manual adjustment, which improves display quality. (During automatic
display adjustment, “Adjusting Display” are displayed on TV screen.)
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of screen in slow playback mode,
- If paused picture vibrates up and down.
Use [TRACKING +/-] buttons of remote control to adjust the display suitable for watching.
21
Recording
Recording
To Record With VCR
1
2
4
5
6
7
Insert a recordable tape.
Insert a tape with recording tab.
1
2
3
“This product incorporates copyright protection technology that is protected by
U.S patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision,
and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.”
Press [REC] button.
Then, it starts recording.
If you want to pause recording, press [PAUSE] button.
After pressing [PAUSE] button, if the pause status continues for five minutes,
the recording is released automatically.
To exit recording, press [STOP] button.
One Touch timer Recording (OTR)
■ When your urgent business happens suddenly in watching TV or you want to record the current TV
program for the desired time, follow the procedures below.
1
2
2
If you want to playback DVD during recording with video, insert a DVD disc.
Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT
into DVD mode and press [PLAY] button. Then, you can watch DVD.
If you want to watch a TV channel during DVD recording with video, press
[VCR] button to convert OUTPUT into VCR mode and press [PR+/-] button.
First, follow the steps 1 to 4 in “Recording With VCR”.
Press [REC] button as much as you want. See the “Recording Times Table”
below.
Once
continuous recording until you press STOP button
Twice recording for 30 mins from current time
3 (times) recording for 1 hour
To Enjoy a TV Channel or DVD during recording
1
Press [REC] button during playing of DVD.
DVD plays and VCR starts recording.
If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the
same time.
If you press STOP [ ] button in VCR mode, VCR stops to record and DVD
continues to play.
With [CHANNEL], [NUMBER] and [INPUT] buttons, select the desired
broadcasting channel or external input unit to record.
Select the desired speed (SP or LP) with [SPEED] button.
Insert the desired DVD disc.
When it is a DVD disc with copy protect function, you can’t copy it.
Insert a recordable tape.
Basic Operation
3
Press [ ] button to power on.
• Press [VCR] button of remote control to change into VCR mode.
To Copy From DVD To Videotape
3
21
recording for 10 hours
22
returning to the status of Once Press
To stop Recording mode, press [STOP] button more than 5 seconds.
Then , you can watch a TV channel.
22
Downloaded From Disc-Player.com Daewoo Manuals
23
Tuning in New Stations
Tuning in New Stations
■ The TV and player are switched on.
■ To see the picture from your player, press the input or AV (Audio/Video) button on the TV.
Station names
Tuning
■ If your player is showing no station name or is showing a station name incorrectly, you can correct
this.
PR+/-:SELECT
OK:CONFIRM
Select "MANUAL SET".
ARD
ZDF
P-03
P-04
MTV
P-06
P-07
PR08
PR09
PR10
PR11
PR12
PR13
PR14
4
5
Set the station you want:
• the programme location number;
• the broadcast system you want (Aerial(CH) or
Cable(CC)),
• You can directly enter the real channel number with the
œ /√
√],
[0 to 9] buttons, or search by pressing [œ
• The fine tuning you can adjust,
• When the program is encoded (and you have a decoder
œ or √] to
connected to socket EURO AV2), press the [œ
select ON or OFF.
• Change or create the station name.
Once you see the station you want, store it.
Tune in further stations (from step 3 onwards) or exit
tuning mode.
MANUAL SET
3
Store and exit.
MANUAL SET
PR
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
PR+/-: UP/DOWN
/➝ : SELECT
OK:CONFIRM
PR01 ARD
PR02 ZDF
PR03 P-03
PR04 P-04
PR05 MTV
PR06 P-06
PR07 P-07
PR+/-:SELECT
OK:CONFIRM
04
AERIAL
CH_ _
ON
____
MANUAL SET
PR
01
RECEPTION
AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER
ON
NAME
O_ _ _
PR+/-: SELECT CHARACTER
/➝ : SELECT POSITION
OK:CONFIRM
SETUP:END
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
Sorting programme locations
SETUP:END
If the location numbers used for programmes stored in your TV and player are different, you can change them on
the player. To do this, move the stations to the right numbers, until they are arranged the way you want.
MANUAL SET
PR
RECEPTION
AUTOSEARCH
FINE TUNING
DECODER
NAME
PR+/-: UP/DOWN
/➝ : SELECT
OK:CONFIRM
03
AERIAL
CH 03
1
ON
____
SETUP:END
2
PR ALIGN
Call the player’s "SETUP",
choose "PR PRESET" then "PR ALIGN".
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
PR01ARD
PR02 ZDF
PR03 P-03
PR04 P-04
PR05 MTV
PR06 P-06
PR07 P-07
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
Clearing programme locations
MANUAL SET
PR
03
RECEPTION
AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER
ON
NAME
____
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM
SETUP:END
1
2
Call the player’s "SETUP",
choose "PR PRESET" then "PR ERASE".
PR01
PR02
PR03
PR04
PR05
PR06
PR07
Select the station (location number) you want to clear.
œ ] button.
Review the picture by pressing [œ
PR ERASE
ARD
ZDF
P-03
P-04
MTV
P-06
P-07
PR+/-:SELECT
:PR VIEW
OK:ERASE
➝
... and confirm.
SETUP:END
➝
It's simplest to use the same location number on both the
TV and video.
P-08
P-09
P-10
P-11
----------
Either select the name from the stored list or you
create the station name and enter a 4-digit name.
Change the letters with the [PR +/–] buttons,
œ /√
√] buttons.
move to the next letter with the [œ
➝
3
2
VCR Operation
PR+/-:SELECT
OK:CONFIRM
Choose any unused location number "----" or "P-xx" ...
Select NAME position.
Press the [0] button to change the given name.
Or press the [1] button to create the station name.
MANUAL SET
PR
01
RECEPTION
AERIAL
AUTOSEARCH CH01
FINE TUNING
DECODER
ON
____
NAME
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM
SETUP:END
SETUP:END
MANUAL SET
PR01
PR02
PR03
PR04
PR05
PR06
PR07
Call this menu (just see the previous page),
if it isn't displayed.
➝
2
1
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
➝
1
To complete the set-up of your video recorder when the
auto set has not stored all of the channels or when you wish
to store a new channel.
Call the video’s "SETUP", choose "PR PRESET".
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
SETUP:END
Clear by pressing OK button.
24
Downloaded From Disc-Player.com Daewoo Manuals
25
Timer Recording
Timer Recording
■ For timer recordings, clock, date, and stations must be set correctly.
■ Load a cassette with its safety tab in place and with sufficient free space for the recording.
Timer recording using ShowView
0-9:SHOWVIEW NUMBER
:CORRECT
OK:CONFIRM
SETUP:END
1
... and confirm.
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
... and confirm.
PR+/-:SELECT
OK:CONFIRM
2
TIMER PROGRAM (ONCE)
➝
Switch your player off.
• VPS/PDC is a service provided by some stations to enable you to perform timer recordings
precisely even if the broadcaster delays the start time of the programme slightly. The time you
enter is the VPS/PDC time so must be correct. Not all stations offer VPS/PDC, in which case the
player will start at the time you enter and not the actual start time of the programme.
If you wish to start recording at a specific time without it being adjusted by the VPS/PDC
system in the event of a delay, switch VPS/PDC off otherwise the player will not record.
• If you don’t have the ShowView numbers see next page for the normal timer.
œ ] button and change
• If you have made a mistake, move back to the relevant position with the [œ
the setting.
• If there is no programme location displayed under “PR” in the change menu, the player doesn’t
yet know the location number for the programme you want. Type it in and this will be stored
for last recordings.
• If you wish to record from a satellite receiver, select under “PR” the satellite programme
location or AV (1/2) (depending on the connection with the antenna cable or the SCART-cable).
Leave the satellite tuner switched on and to the programme you want.
• Should programming overlap, you get a warning.
• To cancel the recording press the button (stop) more than 5 seconds.
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT
OK:CONFIRM
SETUP:END
Type in one after the other:
SETUP:END
PR
03
START TIME
21:20
END TIME
22:20
START DATE
14/08(SAT)
TAPE SPEED
SP
VPS/PDC
ON
PR+/-:SELECT (AV1/AV2)
0-9 : SETUP (PR)
/➝ :CORRECT
OK:CONFIRM
SETUP:END
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
3
•
•
•
•
•
•
The programme location number;
the time the broadcast starts,
the time the broadcast ends,
the day of the broadcast, if it is not today.
Select LP if you wish to make a very long recording .
Switch off VPS/PDC here if you need to .
If you wish to make changes:
œ/√
√]
Move to the position you want to change using the [œ
buttons. Change the setting using the [PR+/- ] or [number]
buttons.
œ or √ ], till you see “OK :
If all setting are ok, press [œ
CONFIRM” in the bottom line.
Confirm.
TIMER PROGRAM (ONCE)
PR
-START TIME
--:-END TIME
--:-START DATE
--/-TAPE SPEED
SP
VPS/PDC
ON
PR+/-:SELECT(AV1/AV2)
0-9 :SETUP(PR)
/➝:CORRECT SETUP:END
VCR Operation
If you wish to make changes:
œ/√
√]
Move to the position you want to change using the [œ
buttons.
…/†
†] or [number] buttons. If all
Change the setting using the […
setting are ok, press [OK], till you see “OK: CONFIRM” in the
bottom line.
Confirm.
Call the player’s "SETUP", choose "TIMER PROGRAM".
Decide if you want to record "ONCE", "WEEKLY" or
"DAILY"...
TIMER PROGRAM (ONCE)
PR
01
START TIME
18:10
END TIME
20:30
START DATE
22/08(FRI)
TAPE SPEED
LP
VPS/PDC
ON
PR+/-:SELECT(AV1/AV2)
0-9 : SETUP (PR)
/➝ :CORRECT
OK:CONFIRM
SETUP:END
➝
Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...
3
SHOWVIEW
83077----
➝
From your TV magazine, type in the number next to the
programme you want to record ...
... and confirm.
2
Normal timer recording
Call the ShowView menu by pressing PROGRAM on the
remote control.
➝
1
■ For timer recordings, clock, date, and stations must be set correctly.
■ Load a cassette with its safety tab in place and with sufficient free space for the recording.
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
œ/√
√] buttons
• If you have made a mistake, move to the position you want to change using the [œ
and change the setting.
• If programme timings overlap, the machine will give a warning message. If you don’t adjust
the times, the machine will record the first programme completely then continue with the
second one.
• If there is no sufficient free space for the recording on the cassette the video switches
automatically to “LP” for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• In case the player is powered on after setting of timer recording, the player cannot record in
VCR mode but can record in DVD mode.
• ShowView is a trademark applied for by Gemstar Development Corp.. The ShowView system is
manufactured under license from Gemstar Development Corporation.
26
Downloaded From Disc-Player.com Daewoo Manuals
27
Timer Recording
More Functions
■ The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Timer Review – changing and erasing
1
Clock / counter display
Call the player’s "SETUP",
choose "TIMER PROGRAM".
TIMER PROGRAM
PR
03
START END DATE
21:20 22:20 16/08
01
-------
18:10
-- : --- : --- : --- : --- : --- : --
PR+/-:SELECT
OK:CONFIRM
22/08
-- / --- / --- / --- / --- / --- / --
03
21:20
22:20
16/08(SAT)
SP
ON
PR01 ARD
STEREO ON
14:00 10/08 V E180 00:48
SETUP:END
TIMER PROGRAM (ONCE)
PR
START TIME
END TIME
START DATE
TAPE SPEED
VPS/PDC
STOP SP
Each time you press [DISPLAY] button,
1x: Time and date+current status ➝ Time and date
2x: Counter+current status ➝ counter
3x: disappear.
• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press the button
to display the VPS/PDC icon.
0 :ERASE
/➝:CORRECT SETUP:END
➝
2
Remaining time and cassette length
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM
SETUP:END
TAPE REMAIN
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM
SETUP:END
E-240 01:27
VCR Operation
Select the programming to change or erase.
If you want to erase this programming press
button [0], confirm with OK.
If you wish to make changes:
Move to the position you want to change using the
œ /√
√] buttons.
[œ
Change the settings using the [PR +/–] or
[number] buttons.
œ or √], until you see
If all settings are ok, press [œ
"OK: CONFIRM" in the bottom line.
Confirm changes with [OK]. Exit the menus.
20:30
-- : --- : --- : --- : --- : --- : --
Call the player’s "SETUP",
choose "TAPE CONTROL"
• Remaining time display is
only possible when the
cassette is loaded.
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.
Searching a recorded program with index
When you record a program, the VCR places an index mark at the start of
the recording.
To search fo an index mark
1. Call the player’s "SETUP", choose "TAPE CONTROL"
2. Choose index + to search forward or index - to search backward.
The VCR will locate your index mark and begin playback.
28
Downloaded From Disc-Player.com Daewoo Manuals
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEXPR+/- :SELECT
OK:CONFIRM
SETUP:END
29
More Functions
More Functions
Accessing counter zero position
Child lock
REW SP
GO TO ZERO
Press the [ ] button for about 5 seconds.
No buttons of front panel can be operated now and LOCK INDICATOR (“
”)
will be displayed on window display. Keep your remote control in a safe place.
To release child lock, press any button of the remote control.
The player will wind to the position 0:00:00 and stop.
0:02:13
Resetting the counter to zero
COUNTER RESET
Reset the counter.
Cassettes
0:00:00
PAL
16 : 9 Wide Screen Format Playing back / Recording
• If you watch a program which is recorded by 16:9 wide screen format with
this player, your TV must have 16:9 wide screen function and you have to
connect TV and player with the A/V scart.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM
SETUP:END
VCR Operation
You can play and record the program of 16:9 Wide-Screen format with this player .
• 16:9 Set
-Auto : This video automatically detects the program format (16:9 or 4:3) and
records or plays this program in the same format.
-ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will
be converted to 16:9 format.
-OFF : The video will play or record all broadcasts in 4:3 format only.
Use only good quality tape cassettes with the VHS logo.
•Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loud speakers and computer monitors, for example).
•Always wind the tape to the beginning when you have finished. Store with the full
spool at the bottom and with the cassette in its cover.
You can protect your precious recordings from being wiped by breaking out the safety
tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use
the tape after removing the tab, cover the hole with adhesive tape.
and ...
16:9 SET
Dimmer : Your player dims its display when switched to stand-by mode.
Auto power off : Your player switches to stand-by when no tape is played and no station is received for more
than 5 minutes.
AUTO
OFF
ON
PR+/-:SELECT
OK:CONFIRM
SETUP:END
AUTO REPEAT
If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays
repeatedly the tape from the beginning to end parts.
To release this mode, press the [
] button or mode operation button. (PLAY, FF, REW or STOP)
SETUP languages
Call the player’s "SETUP", choose
"VCR SETUP", then "LANGUAGE SET".
Select your language.
Confirm.
30
Downloaded From Disc-Player.com Daewoo Manuals
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
PR+/-:SELECT
OK:CONFIRM
SETUP:END
31
More Functions
Connections and Copying
■ The player machine records the complete sound signal transmitted by the TV station.
■ On the mono VCR, you will hear the normal mono sound.
■ If you are using a SCART cable, select the AV input on the TV to see the picture from the player.
■ If you are not using a SCART cable, select the button number on the TV reserved for video input to
see the picture from the player.
The Hi-Fi system
In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a
high-quality Hi-Fi sound system.
This means you can enjoy
• films with excellent stereo sound
• films of full-length concerts in high quality stereo
• films with impressive Surround Sound using additional Surround equipment
• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track
• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound
To the TV via antenna cable (if you are not using a SCART cable)
If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial
cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to
ensure the best pictures and sound.
1
What you can listen to
During Playback, the player displays what is recorded on
the cassette (if not, press AUDIO).
• “Hi-Fi” = stereo/bilingual
nothing = monaural sound
STOP SP
PLAY
PR10 EURO
STEREO ON
SP
Hi-Fi
L+R
2
• If the quality of the test picture transmitted to the TV is poor due to
interference caused by a station transmitting on channel 52, you can
tune the player to a different transmitting channel. Find a free
channel between 21 and 69 on your TV.
Call the player’s "SETUP" choose "VCR SETUP" then "RF
OUTPUT SET".
VCR Operation
During Stop, the player displays what the current station is broadcasting. When
you switch to another station or the current station changes the sound mode, your
player displays the programme and sound mode on screen (if not, press AUDIO).
• “STEREO” = stereo
“BIL I / BIL II ”=bilingual
nothing= monaural sound
Once you have carried out the steps in "Connecting up the player" ,
switch on your TV.
Press the [ENTER] button of the player’s remote control longer than 5
seconds to call the player´s test picture.
Tune the TV to the test picture using the channel pre-set functions of
your TV as described in its manual.
When you have found the test picture, store it under the button
number on your TV for player input.
Press the [ENTER] button of the player’s remote control again longer
than 5 seconds to release the test picture.
RF OUTPUT SET
CH
52
0-9:SELECT (21-69)
OK:CONFIRM
SETUP:END
Type in the free channel.
Store and exit.
Choice of sound output
During a stereo performance (playback-”Hi-Fi”/ broadcast
- “STEREO”):
Hi-Fi stereo ➝ left audio channel only ➝ right channel
only ➝ the normal mono sound track of a Hi-Fi cassette
• During broadcasting a bilingual performance : Main
language (original sound track) ➝ sub-language
(dubbed) ➝ both main language and sub-language.
• For mono performances , there is no choice available.
32
Downloaded From Disc-Player.com Daewoo Manuals
PLAY
SP
Hi-Fi
L+R
HI-Fi
LEFT
Hi-Fi
RIGHT
Hi-Fi
OFF
STOP SP
• If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV
may help (refer to the TV manual).
• Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.
PR10 EURO
BIL
I
BIL
II
BIL
I+II
33
Connections and Copying
Playing a desired scene
■ Switch off all components when connecting or disconnecting cables.
To skip scenes in a disc
Copying
To copy to your player from another video
machine, connect the two machines with a cable
between their EURO AV (SCART) sockets and
select as programme "AV 1/AV 2" or “F. AV”
(front sockets) using the [AV], [PR+/-] or [INPUT]
button.
Set the other video machine to playback and your
machine to record.
•To connect a mono audio source, use the front
Audio In socket marked L.
Other VCR
Decoder for Pay-TV
Camcorder
Video Player
Satellite Receiver
TV
(other VCR)
Audio Amp.
devices
To copy to another video machine from your
player, connect the two machines by means of
their EURO AV (SCART) sockets.
On the other video, select its AV input and set the
machine to record.
Switch your player to play back at the position you
want copying to start.
Assembling
To move to next chapter (or track), press [√√❚ NEXT] button.
The current chapter (or track) moves to the next chapter (or track).
Press [❚œœPREV] button.
The current scene moves to the previous chapter (or track) or first scene of current
chapter (or track).
Directly moving to a desired title
■ Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE/PBC] or
[MENU] button can be used to select the movie title. Details of operation may differ depending on the disc used.
* Selecting a title may not be available on certain DVD discs.
Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique
for smooth edit points:
• The symbol is lit in VCR mode and goes out in TV
mode.
• This symbol means the cassette is in.
2
Press the [TITLE/PBC] or [MENU] button.
A list of the titles on the disc is displayed.
DVD Operation
1
* For the case of VCD disc, menu screen will
appear only when the disc has PBC function
and PBC ON is activated.
Press the [ENTER] button or [PLAY] button
after pressing the [œ √…†] button to select
the desired title.
For the case of VCD disc, press the [Number]
button.
The selected title now starts playing.
• This symbol means a timer recording is setting.
For the best results, the source cassette from which
you are recording should already be playing back
when you start recording.
34
Downloaded From Disc-Player.com Daewoo Manuals
35
Playing desired scene
Playing desired scene
Repeating a defined period
Searching DVD with a title number, a chapter number or a time
Each time you press [REPEAT] button in playback mode, repeat playback starts as below.
➝
TRACK
REPEAT TRACK
REPEAT TRACK
➝
➝
➝
➝
➝
TITLE
DISC
REPEAT FOLDER
REPEAT FOLDER
OFF
REPEAT OFF
MENU
➝
➝
➝
➝
DISC
RANDOM
➝
➝
REPEAT OFF
OFF
Press [SEARCH] button in playback mode.
It shows current disc mode.
1
- MP3/JPEG ➝
CHAPTER
- DivX -
➝
- VCD/CD -
- DVD -
TITLE
01/02
➟ current title / total title
CHAPTER
02/24
➟ current chapter
AUDIO
2CH ENGLISH
➟ current audio
SUBTITLE
OFF
➟ current subtitle
ANGLE
1/2
➟ current angle / total angle
BITRATE 45
Title Elapsed 0:17:24
MENU
* For the case of VCD disc, repeat playback starts only in PBC OFF mode.
TT TIME
1:49:00
➟ total time
CH TIME
0:17:24
➟ chapter time
REPEAT
OFF
➟ repeat playback mode
TIME DISP. TITLE ELAPSED
BITRATE 45
Repeating a defined period from A to B
■ You may repeat a defined period from A to B.
1
2
3
At the point where you want to start the repeat
playback, press [A-B] button.
The right figure appears and repeat playback start
position (A) is set.
At the point where you want to end the repeat
playback, press [A-B] button again.
The repeat playback end position (B) is set and a
defined period from A to B is playback repeatedly.
To exit from repeat playback mode, press [A-B]
button.
It enters into Normal Playback mode.
Title Elapsed 0:17:24
If you want to search with a title number, select
TITLE using […/†] button. Then press [ENTER]
Please enter the new title number to be searched
using the [NUMBER] buttons.
TITLE
_1/02
CHAPTER
02/24
AUDIO
2CH ENGLISH
SUBTITLE
OFF
ANGLE
1/2
TITLE
01/02
DVD Operation
2
➟ time display
A-
3
A-B
4
If you want to search with a chapter number,
select CHAPTER using […/†] button. Then press
[ENTER]
Please enter the new chapter number to be searched
using the [NUMBER] buttons.
If you want to search with a total time or chapter
time, select TT TIME or CH TIME using […/†]
button, and press [ENTER].
Please enter the new TT time to be searched using
the [NUMBER] buttons.
CHAPTER
_2/24
AUDIO
2CH ENGLISH
SUBTITLE
OFF
ANGLE
1/2
TT TIME
1:49:00
CH TIME
0:17:24
REPEAT
OFF
TIME DISP. TITLE ELAPSED
PLAY starts from the selected position.
* You can also select AUDIO, SUBTITLE, ANGLE, REPEAT and TIME DISPLAY using [SEARCH]
button.
36
Downloaded From Disc-Player.com Daewoo Manuals
37
Playing desired scene
Playing desired scene
Searching VCD with a track, track time or disc time
1
Searching CD with a track, track time or disc time
Press [SEARCH] button in playback mode.
1
It shows current disc mode.
If you want to search with a disc time, press
[SEARCH] button once.
Please enter the new time to be searched using
the [NUMBER] buttons.
DISC GO TO :
_ :_
TRACK GO TO :
_ :_
SELECT TRACK:
_ /20
PLAY starts from the selected position.
DISC TIME 0:55:35
➟ disc time
TRACK TIME 0:55:35
➟ track time
If you want to search with a track time,
press [SEARCH] button twice.
Please enter the new time to be searched using
the [NUMBER] buttons.
REPEAT
➟ repeat playback mode
PLAY starts from the selected position.
MENU
TRACK
_1/02
OFF
TIME DISP. DISC ELAPSED
BITRATE 45
2
➟ time display
Title Elapsed 0:17:24
If you want to search with a track number, select
TRACK using […/†] button. Then press
[ENTER].
Please enter the new track number to
be searched using the [NUMBER] buttons.
If you want to search with a disc time or track
time, select DISC TIME or TRACK TIME using
[…/†] button. Then press [ENTER] button.
Please enter the new time to be searched using the
[NUMBER] buttons.
3
TRACK
_1/02
DISC TIME 0:55:35
TRACK TIME 0:55:35
REPEAT
OFF
Storing markers in memory to be viewed (listened to) again
TRACK
_1/02
DISC TIME 0:55:35
TRACK TIME 0:55:35
REPEAT
■ Storing a MARKER in memory is similar to marking your page in a book. It allows you to quickly
return to any point on the disc.
OFF
TIME DISP. DISC ELAPSED
1
2
Downloaded From Disc-Player.com Daewoo Manuals
It shows current and total track number.
Please enter the new time to be searched
using the [NUMBER] buttons.
TIME DISP. DISC ELAPSED
* You can also select REPEAT and TIME DISPLAY using [SEARCH] button.
38
If you want to search with a track number,
press [SEARCH] button three times.
DVD Operation
3
2
➟ current track / total track
Storing a marker in the memory.
BOOKMARK
Press [MARK] during play and press [ENTER]
at the starting point to be viewed (listened to)
again.
Press <ENTER> Key To Mark
Recalling/Clearing a marker
Press [MARK] during playback. Press […,†,œ ,
√] to select the marker to be recalled/cleared.
Press [ENTER] to recall a marker. Or press
[CLEAR] to clear a marker.
BOOKMARK
1
2
3
TT:01 CH:02 TIME 0:02:27
Press <ENTER> Key To Play
Press <CLEAR> Key To Clean
39
Confirming the current PLAYING TIME
Confirming the current playing time of DVD disc
Confirming the current PLAYING TIME
Confirming the current playing time of CD, VCD, and DivX
While in playing, press [DISPLAY] button.
While in playing, press [DISPLAY] button.
It shows the current playing time.
Each time you press [DISPLAY] button in playback mode, DISPLAY is change as below.
It shows the current playing time.
Each time you press [DISPLAY] button in playback mode, DISPLAY is change as below.
CHAPTER ELAPSED
TT 01/02 CH 01/10
TRACK ELAPSED
0:00:57
TRACK 01/20
1:50:57
TRACK 01/20
0:00:57
TRACK 01/20
0:15:57
TRACK 01/20
CHAPTER REMAIN
TT 01/02 CH 01/10
0:05:57
1:50:20
TRACK REMAIN
DISC ELAPSED
TITLE REMAIN
TT 01/02 CH 01/10
0:00:57
TRACK REMAIN
TITLE ELAPSED
TT 01/02 CH 01/10
TRACK ELAPSED
0:00:57
0:00:57
DISC REMAIN
- DivX -
DISC REMAIN
1:50:57
DVD Operation
- CD, VCD -
40
Downloaded From Disc-Player.com Daewoo Manuals
41
Selecting an AUDIO language,
SUBTITLE language and 3D AUDIO
Selecting an audio language
Selecting an AUDIO language, SUBTITLE
language and 3D AUDIO
Selecting 3D Audio
■ The user may select an audio language and subtitle language if a disc includes Multi-language.
■ You can enjoy a virtual 3D sound effect from 2-channel sources.
Keep pressing [AUDIO] button till the user’s preferred language appears in
playback mode.
A certain disc may not
support audio select or
subtitle select.
If DVD disc includes audio information, every time the user presses [AUDIO] button,
English (ENG), French (FRE), Spanish (SPA) and others appear one by one.
Keep pressing [3D] button till the preferred sound effect appears.
Every time you press [3D] button, the 3D sound is change as below.
REVERB :CONCERT
SURROUND : ROCK
REVERB :LIVING ROOM
SURROUND : POP
REVERB : HALL
SURROUND : LIVE
REVERB : BATHROOM
SURROUND : DANCE
REVERB : CAVE
SURROUND : TECHNO
REVERB : ARENA
SURROUND : CLASSIC
REVERB : CHURCH
SURROUND : SOFT
REVERB : OFF
SURROUND : 3D OFF
AUDIO 1/2 : AC3 2CH ENGLISH
Selecting a subtitle language
Keep pressing [SUBTITLE] button till the user’s preferred language appears in
playback mode.
If a DVD disc includes subtitle information, every time the user presses [SUBTITLE]
button, English (ENG), French (FRE), Spanish (SPA), ... and OFF appear one by one.
- DVD, VCD, DivX -
42
Downloaded From Disc-Player.com Daewoo Manuals
DVD Operation
SUBTITLE 01/02: ENGLISH
- CD, MP3 -
43
Selecting ZOOM and Multi Angle
Program Playback
Using a zoom function
■ The user can enlarge the current screen.
■ The user can watch only wanted Title/Chapters or Tracks in wanted order up to 20 events.
Keep pressing [ZOOM] button till the preferred zoom appears.
A magnification ratio of display is increased or decreased by one step in order
upon pressing the [ZOOM] button.
1
Press [PROGRAM] button in playback
mode.
• ZOOM : 2 times ➝ 3 times ➝ 4 times ➝ 1/2 times ➝ 1/3 times ➝
1/4 times ➝ OFF .
1
2
3
4
5
TT:
TT:
TT:
TT:
TT:
CH:
CH:
CH:
CH:
6
7
8
9
10
TT:
TT:
TT:
TT:
TT:
√√❚
EXIT
A base point to be enlarged is centre and the point can be changed with the operation of
[œ √…†] button.
2X
1/2X
Press [ZOOM] button, then press [ √√ ] (increase) or [ œœ] (decrease).
Select the number using [ …,†,œ , √ ] and press [ENTER]
button.
3
Enter Title number and Chapter number (DVD), or Track
number (VCD, CD) using [NUMBER] buttons.
4
Select START using [ …,†,œ , √ ] button,
and press [ENTER].
TT:01
TT:02
TT:
TT:
TT:
EXIT
CH:11 6
CH:15 7
8
CH:
9
CH:
10
CH:
START
TT:
TT:
TT:
TT:
TT:
CH:
CH:
CH:
CH:
CH:
√√❚
DVD Operation
• ZOOM : 50% ➝ 70% ➝ 100% ➝ 125% ➝ 150% ➝ 200% .
[ √√ ]
[ œœ ]
2
1
2
3
4
5
CH:
CH:
CH:
CH:
CH:
When playing JPG, it can be displayed in various directions by using [œ √…†] button.
[œ √ ] : Rotate 90 degrees to clock wise or counter clock wise.
[…†]: Turn over the screen by 180 degrees horizontally or vertically.
Different Angle
■ If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited
to a DVD disc supporting multi angle information.
Keep pressing [ANGLE] button till the preferred
angle appears.
Every time the user presses [ANGLE] button, an angle
degrees changes in a consecutive order.
44
Downloaded From Disc-Player.com Daewoo Manuals
1/5
45
About MP3, JPG and DivX® discs
About MP3, JPG and DivX® discs
Playing a disc containing MP3 or JPG files
■ Program
You will play a MP3 file or a JPG file recorded in disc.
1
• Pressing the [PROGRAM] button in MEDIA PLAYER WINDOW mode. The
PROGRAM WINDOW is displayed. Select the file you want to program using the
[…†] button, and press the [MARK] button.
• Pressing the [PROGRAM] button again, you can see the PLAYLIST.
Pressing the [ENTER] button, the PROGRAM starts.
Press the [OPEN/CLOSE] button to open the disc tray.
Put a MP3 or JPG disc on the disc tray with the label side up.
Press the [OPEN/CLOSE] button to close the disc tray.
It will take some time to recognize a disc and to show up the directory structure.
00:12/04:23 3D OFF
002/18
REPEAT OFF
√
PROGRAM
2
MP3
00:12/04:23 3D OFF
002/18
JPG
REPEAT OFF
√
00:12/04:23
/AA/
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
ARTIST -TRA
9268-2
AAFALLROAD12
ALL_NITE
AMEILEENDONA
AMFUNKYFLOW
AMPOPPIESDAI
CBR
192Kbps
44.1KHz
ARTIST-TRA
RESOLUTION 502x721
Select a file or folder to play.
Select a desired folder or file by pressing the […†] button and then press on
the [ENTER] button. It will select or play the file or folder selected.
■ Play or pause
√ /❚ ❚)] button.
It will change into Play or Pause while pressing the [PLAY/PAUSE (√
■ SEARCH
The [SEARCH] button and select the file (MP3, JPG) or the time (MP3) you desired
using the [Number] buttons.
■ STOP
The [STOP] button.
■ Pass over to a next or previous file.
• When you press the [√√❚ NEXT] button on the remote control, it will move on
the first part of a next file and start to play it. And it will continue to move on the
first part of a next file and play it upon pressing the button.
• When you press the [Previous ❚œœ] button on the remote control, it will move
on the first part of a previous file and start to play it. And it will continue to move
on the first part of a previous file and play it upon pressing the button.
46
Downloaded From Disc-Player.com Daewoo Manuals
ADD TO PLAYLIST
AMFUNKYFLOW
AMPOPPIESDAI
RESOLUTION 692x962
• To remove the PLAY LIST file, select the file you want to remove and press the [MARK]
button.
• If you press the [PROGRAM] button while the JPG file is playing, you can change the state
the TRANSITION EFFECT.
Each time you press [PROGRAM] button in playback mode, TRANSITION EFFECT is
change as below.
- NONE ➝ WIPE TOP ➝ WIPE BOTTOM ➝ ~~ ➝ WINDOW V ➝ WIPE FROM EDGE
TO CENTER ➝ MOVE IN FROM TOP ➝ NONE.
DVD Operation
3
REPEAT OFF
/AA/
REPEAT OFF
√
PLAYLIST
9268-2
AAFALLROAD12
ALL_NITE
AMEILEENDONA
AMFUNKYFLOW
AMPOPPIESDAI
It will display MEDIA PLAYER.
00:12/04:23 3D OFF
002/18
■ Thumbnail mode
• Pressing the [MENU] button in JPG playback mode, the THUMBNAIL mode is
displayed.
Slide Show
Menu
: If you select Slide Show, the Slide Shows is starting.
: If you select Menu, you can see the REMOTE KEY FUNCTON
window.
■ Combination Play
You can enjoy a slide show while listening to MP3 music files.
1. Select the MP3 file and press [ENTER].
2. Select the JPG file using the […†] button and press the [ENTER] button.
The MP3 file you selected continues to be played back during the JPG slide show.
47
About MP3, JPG and DivX® discs
About MP3, JPG and DivX® discs
Playing a disc containing DivX® files
■ Recognizing range for a MP3 disc is stated below.
• It may break of a sound while playing for a file in which it was recorded with a variable
bit rate(VBR) from low bit rate to high bit rate (Ex.:64~256kbps) in itself.
• A file name must be composed with figures and the extension must be MP3.
• The Maximum recognizing number of files is 647.
1
■ Recognizing range for a JPG disc is stated below.
• File name is ****.jpg which is composed with characters and figures.
• Some of JPG files may become not only slow to play but also impossible to play
since the capacities are too large.
• The state or saving method of a disc may cause not to play it.
Cautions upon a use of MP3, JPG disc.
• Try to avoid the use the CD-RW(Rewritable) disc if possible because it can not be
played back according to the recording format.
• The CD-R must be recorded with the standard format because it can not be played
back according to the recording format.
• The CD-R should be written using the ‘disc at once’ method.
• The disc which is made with ISO 9660 format can be played back.
2
3
4
Insert a DivX disc.
Press the [OPEN/CLOSE]
button and then it will open the
disc compartment.
Insert a DivX disc into the disc
compartment while putting the
playing side downward and
then it will display MEDIA
PLAYER.
00:04:23
001/001
3D OFF
REPEAT OFF
\
Wet.Dreams.2.2
DX50
720X304 @ 24fps
536 kbps (Video)
AC3
Wet.Dreams. 2.2005. DVDRip. D. avi
After selecting a desired folder by pressing the […†] button, press the
[ENTER] button.
After selecting a desired track by pressing the […†] button, press the
[PLAY/PAUSE ( √ /❚ ❚ )] button or the [ENTER] button.
Press the [■ ] button when you want to stop playing.
• It will return to the display of MEDIA PLAYER.
DVD Operation
• In order to recognize the subtitle file automatically, DivX file name and
Subtitle file name must be same.
Ex) DivX file name : ETHE ADVENTURE.avi
Subtitle file name : ETHE ADVENTURE.sub
■ DivX® video technology, often called the “MP3 of video”, enables large
video files like DVDs or home videos to be converted to a fraction of the
size.
• Types of playable DivX files : ".avi", ".divx"
• Types of playable Codec formats : DivX3.xx, DivX 4.xx, DivX 5.xx, XviD, MP43,
3ivx
• It may not be played according to a type of DivX files, a recording method, or a
disc state. (The device was authenticated for DivX files from the DivX Networks,
Inc. and it is available for playing a normal DivX file but may be unavailable for
playing the DivX files that have been manufactured with an illegal or abnormal
Codec.)
• When the image / sound structure of a recorded file have not been undergone the
interleave, it will output either the image or the sound.
48
Downloaded From Disc-Player.com Daewoo Manuals
49
About MP3, JPG and DivX® discs
Displaying menus in a disc
To display menus in a disc
•
•
•
•
When the frame number per a second is more than 30, it may not play it normally.
It will not support a DivX file coded with ‘dts'.
It will not support some GMC or Q-Pel(Quarter Pixel).
It will be available to play a file with a resolution size will be below 720 x 480
(width x length) pixels only.
• If it has a code unable to display, it displays “Resolution NOT supported”, “Video
Codec NOT Supported” or “Audio Codec NOT Supported” .
• A file name of DivX subtitles must be made with up to English 90 characters only.
• A file of DivX subtitles only supports a file named with the extensions of .smi,
.srt, .sub or .txt.
• DivX, DivX Certified and associated logos are trademarks of DivXNetworks,
Inc. and are used under license.
■ If a disc includes menus, the user may use them.
1
Press [MENU] button.
• In case of a DVD disc, it shows menus in the disc. Also they are
different according to discs.
• If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC]
button.
* CD and VCD1.1 do not support the function.
2
If it is a DVD disc, move a cursor to a relative item with arrow buttons of [œ
√…†] button and select one with [ENTER] button or [PLAY] button.
DVD Operation
50
Downloaded From Disc-Player.com Daewoo Manuals
51
Language Setup
Language Setup
■ A user can set OSD language, Audio, Subtitle and Disc Menu.
1
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENGLISH
AUTO
OFF
AUTO
ENTER
“OSD” means “On
Screen Display”.
2
Selecting a OSD language.
Select a OSD language to be displayed on
DVD menus with [ENTER].
In case a disc does
not include setting
languages
information, the
selected language
does not appear.
Selecting Audio language.
Set your preferred audio language with
[ENTER]. If the audio language is set and
recorded on the DISC, it is automatically
played in the set language every time it is
played.
OTHERS - - - - : Another language can be
selected. You can input 4-digit language
code.
Refer to the language codes on next page. Press
[CLEAR] if an incorrect language code is entered.
4
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
SWEDISH
RUSSIAN
CZECH
HUNGARIAN
POLISH
AUTO
OTHERS
SETUP
ENTER
SETUP
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
SWEDISH
RUSSIAN
CZECH
HUNGARIAN
POLISH
AUTO
OTHERS
ENTER
SETUP
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
SWEDISH
RUSSIAN
CZECH
HUNGARIAN
POLISH
AUTO
OTHERS
SETUP
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
SWEDISH
RUSSIAN
CZECH
HUNGARIAN
POLISH
OFF
OTHERS
ENTER
SETUP
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
SWEDISH
RUSSIAN
CZECH
HUNGARIAN
POLISH
OFF
OTHERS
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE”
and/or “DISC MENU”.
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
Language
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali;Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Code Language
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
Code
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
Language
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Code
7789
7865
7869
7876
7879
7982
8065
8076
8083
8084
8185
8277
8279
8285
8365
8368
8372
8373
8375
8376
8377
8378
8379
8381
8382
Language
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Sansrit
Sindhi
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Code
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Setup
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
ENTER
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
DUTCH
PORTUGUESE
ENTER
52
SWEDISH
RUSSIAN
CZECH
HUNGARIAN
POLISH
AUTO
OTHERS
Table of language and Their Abbreviations
OTHERS - - - - : Another language can be
selected. You can input 4-digit language
code.
Refer to the language codes on next page. Press
[CLEAR] if an incorrect language code is entered.
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
OTHERS - - - - : Another language can be
selected. You can input 4-digit language code.
Language Setup
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENTER
Selecting Subtitle language.
Set your preferred subtitle with [ENTER].
If the subtitle language is set and recorded
on the DISC, it is automatically played in
the set language every time it is played.
SETUP
Selecting Disc Menu language.
Set your preferred DISC MENU language with
[ENTER]. If the DISC MENU language is set and
recorded on the DISC, it is automatically played
in the set language every time it is played.
Refer to the language codes. Press [CLEAR] if an
incorrect language code is entered.
ENTER
3
5
While STOP, press [SETUP] button.
SETUP
53
Video Setup
Audio Setup
■ A user may select audio menu according to a user’s speaker set.
■ A user can set up a connected TV condition and screen.
1
1
While STOP, press [SETUP] button.
VIDEO SETUP
TV ASPECT
DivX® VOD
2
If a user selects “4:3 PS”, the user can watch
only a center of the original scene of “16:9”. If a
user selects “4:3 LB”, the user can watch the
original scene of “16:9”, but the top and bottom
of the screen look black color.
If a disc size is originally recorded in 4:3, a user
cannot watch it in a wide screen though a user
sets a size as “16:9 Wide”.
3
DivX® REG.
Please use this code to register this player with
the DivX® Video On Demand service.
This will allow you rent and purchase video
using the DivX® Video On Demand format.
To learn more go to www. divx.com/vod.
Your Registration Code is : ********.
2
4:3 PS
4:3 LB
16:9 WIDE
ENTER
Select a Digital Output.
Set audio output to coaxial. You can set the
outgoing digital signal to BITSTREAM or
LPCM:
3
SETUP
AUDIO SETUP
DIGITAL OUT
DYNAMIC RANGE
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
SETUP
VIDEO SETUP
BITSTREAM
ENTER
SETUP
VIDEO SETUP
TV ASPECT
DivX® VOD
AUDIO SETUP
DIGITAL OUT
DYNAMIC RANGE
4:3 LB
ENTER
Selecting TV Aspect.
Set your preferred TV ASPECT ratio with
[ENTER] button.
While STOP or Resume STOP, press
[SETUP] button.
BITSTREAM
LPCM
ENTER
SETUP
Select a Dynamic Range.
Select the Dynamic Range and set the level
using the […/†] button. Then press the
[ENTER] button.
AUDIO SETUP
FULL
DIGITAL OUT
DYNAMIC RANGE
3/4
1/2
DivX® Video On Demand
Your registration code is : MRI2ZQXT
To lean more visit www.divX.com/vod
OK
ENTER
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
1/4
OFF
ENTER
SETUP
SETUP
Setup
54
Downloaded From Disc-Player.com Daewoo Manuals
55
Others Setup
Others Setup
1
While STOP or RESUME STOP, press [SETUP]
button.
ON
RESET
ON
8 ADULT
ENTER
2
Select screensaver.
If bright scenes continue to be displayed in screen,
TV can be damaged. Set the screensaver to "On",
the screensaver functions automatically and DVD
logo moves continuously if the resume stop, stop,
open status is maintained for about 5 minutes.
6
OTHERS SETUP
SCREEN SAVER
DEFAULTS
PBC
PARENTAL
PASSWORD CHANGE
OTHERS SETUP
SCREEN SAVER
DEFAULTS
PBC
PARENTAL
PASSWORD CHANGE
SETUP
OTHERS SETUP
ON
RESET
ON
8 ADULT
ENTER
Then enter “OLD PASSWORD”, “NEW
PASSWORD” and “CONFIRM
PASSWORD”. Then press [ENTER].
ON
SCREEN SAVER
OFF
DEFAULTS
PBC
PARENTAL
PASSWORD CHANGE
ENTER
Changing a password.
To change your password, move the cursor
to “ PASSWORD CHANGE ” and press
[ENTER].
OTHERS SETUP
SCREEN SAVER
ON
OLD PASSWORD
DEFAULTS
RESET xxxx
xxxx
PBCNEW PASSWORD ON
PARENTAL
CONFIRM PASSWORD8 ADULT
PASSWORD CHANGE
OK
SETUP
ENTER
3
Restoring DEFAULTS.
This feature resets every function to its original
Factory Defaults except the Parental Control
settings.
4
Select PBC.
You can select the PBC(Playback Control)
Status.
OTHERS SETUP
Now your password is changed.
SCREEN SAVER
RESET
DEFAULTS
PBC
PARENTAL
PASSWORD CHANGE
ENTER
SETUP
SETUP
OTHERS SETUP
SCREEN SAVER
ON
OLD PASSWORD
DEFAULTS
RESET xxxx
xxxx
PBCNEW PASSWORD ON
PARENTAL
CONFIRM PASSWORD8 ADULT xxxx
PASSWORD CHANGE
OK
SETUP
ENTER
SETUP
OTHERS SETUP
SCREEN SAVER
DEFAULTS
ON
PBC
OFF
PARENTAL
PASSWORD CHANGE
The initial password is 3308. In case you forget newly-input password, you can use 3308 as a password.
ENTER
5
SETUP
“Parental Lock” activates only if you set a password and the unit goes into Lock status. When the disc
has no parental function even if the disc for adult only, Parental Lock doesn’t activate.
Select Parental.
Press [ENTER] button when the cursor is
located in PARENTAL.
ENTER
Setup
Change Parental Rating level.
Select the desired Parental level and press
[ENTER].
When “PASSWORD” appears on the screen
input the password and press [ENTER].
OTHERS SETUP
SCREEN SAVER
ON
DEFAULTS
RESET
PBC
ON
PARENTAL
8 ADULT
PASSWORD CHANGE
SETUP
OTHERS SETUP
These 8 levels of parental control, protect
children from watching violence, sexual
scenes and other objectionable material.
SCREEN SAVER
DEFAULTS
PBC
PARENTAL
PASSWORD CHANGE
2G
3 PG
4 PG-13
5 PG-R
6R
7 NC-17
8 ADULT
ENTER
56
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
57
About DVD
About DVD
Terms related with DVD
Playable Disc
• DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD
Disc type
Playable
Restriction
DVD
Video CD
Possible
Possible
Region number 2 or Region number All
Version 1.0/1.1/2.0, SVCD
CD
CD-ROM
CD-R
Possible
Possible
Possible
PCM or dts
MP3 File
Video-CD/CD/MP3/DivX® Video/JPG
CD-RW
Possible
Video-CD/CD/MP3/DivX® Video/JPG
DVD±R
DVD±RW
DivX® Video
Possible
Possible
Possible
DVD Video/MP3/DivX® Video/JPG
DVD Video/MP3/DivX® Video/JPG
.avi/ .DivX/ .mpeg/ .mpg File
DVD-ROM
DVD-RAM
Impossible
Impossible
Photo CD
Possible
except KODAC CD
• You should record the file with standard format.
• Playback of some discs such as CD-R, CD-RW, DVD-R, DVD-RW, or DVD+RW may be impossible according
to its record status.
This unit is designed and manufactured to respond to the Region Management information that is
recorded on a DVD disc. The region number of this player is “2”. If the region number described on the
DVD discs does not correspond to the Region number of this player, the player will not play this disc.
This player will play DVD discs made for “ALL” regions. Therefore, this player will play DVD discs
marked with labels containing the region number “2” or “ALL”.
(Region 2)
A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video
information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By
using MPEG-2 video compression and digital 3D surround sound, DVD realizes high-defined screen
and quality sound like a movie theater.
CDDA
A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
MP3
Audio compression format that enables audio files to be stored and transferred on a computer with a
relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)
PBC
This is recorded on a Video CD 2.0, Video CD 3.0 and SVCD. The scenes or information to be viewed (or
listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV
monitor. It stands for PlayBack Control.
CHAPTER
It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of
which a track is called as a chapter. A certain scene of a screen can be quickly searched with the
chapter number.
TITLE
It means the information recorded in a DVD. A DVD can be divided into may titles.
TRACK
It means the information recorded in a video CD and audio CD. A disc consists of many a track,
for which a user can search a certain position.
dts
Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in movie
theatres around the world. It enables the bit rate to be increased to provide good sound quality.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Multi Angle Some DVD discs contain the various scenes that have been simultaneously shot from a number of
different angles.
REGION MANAGEMENT INFORMATION
2
DVD
ALL
PCM
Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps
to 640 kbps, thus offering flexibility and economical performance as well as uncompromised
sound quality.
Digital audio data that is decoded into an analog signal for subsequent output to speakers.
Lt/Rt
It indicates L/R of Dolby Digital 2CH Downmix output.
Downmix
DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from
the output audio channel configuration. For example, with just one stereo speaker system you can
hear full 5.1 channel audio.
RGB
This stands for red, green and blue. It means the video signal separated into its three primary
colour components ready to drive the picture tube almost directly. Two signalling connections are
needed to make the television accept the synchronisation and RGB signals. All this is in the
SCART connector. Not all televisions have RGB inputs.
SCART
An acronym (Syndicat des Constructeurs d'Appareils Radiorécepteurs et Téléviseurs) for a
connector used with many kinds of audio-visual equipment. It is also called Peritel and Euroconnector.
Downloaded From Disc-Player.com Daewoo Manuals
The others
Bitstream
(Region ALL)
58
Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/16bit, a
DVD is recorded in 48KHz/16bit up to 96KHz/24bit.
59
About DVD
Basic information about VCR and Videotape
Terms related with VCR
Handling Disc
• To keep a disc clean condition, please do not touch a side containing play
information.
• Do not attach a bit of paper or sticky tape on it.
• Do not expose a disc to a direct sunlight or electric heating systems.
• After using it, please keep a disc in a case.
AFT
Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition.
CABLE
Cable television.
Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you
locate a particular segment of the tape quickly and easily.
LP
Long Play, an intermediate tape recording speed that combines most of the picture/audio quality
obtainable at the standard recording speed with some of the tape economy of Extended Play (EP).
OSD
On-screen display of information pertinent to the features of the VCR.
Cleaning Disc
OTR
• Before using it, please rub it from center toward outside with clean clothes.
• Do not use any type of solvent such as thinner, benzol (benzene), commercial cleaning
goods or antistatic sprays.
One-touch recording, a feature that allows you to record the program you’re watching by
pressing the REC key. Each press of the key increases the recording time by 30 minutes, up to 10
hours.
RF
Radio frequency, the composite audio/video signal supplied to a TV receiver (or other video
component) by an antenna or cable system.
Safety tab
The plastic tab at the back of a video tape cassette which, when removed, prevents accidental
erasure of a recording.
SP
Standard play, the recording speed to use when the best picture quality is of prime importance
(and when total recording time is not).
What is dew condensation symptom?
• If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from airconditioner...and others, temperature varies sharply, which makes dew on head drums of VCR.
If dew condensation occurs,
1
First, turn it on for one or two hours before using it.
2
Do not use it because it may develop troubles of a VCR or videotape.
How to use a head cleaner
• In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads.
Please remove contaminants using a head-cleaner like below order.
1 Insert a head-cleaner into VCR
2 Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds.
PLAY (5secs)
60
Downloaded From Disc-Player.com Daewoo Manuals
FF (10secs)
Eject a head-cleaner from VCR
• If the screen is not clean yet, please repeat the above 2 or 3 times more.
• A head-cleaner is not for sale. Please ask it for the nearest agent.
• In case a user ask the removal of contaminants of us, the user should pay extra charges.
The others
3
61
Before doubting about troubles (VCR)
Symptom
“Power On” does not work.
➤
Please check whether a power plug is inserted in an electric outlet.
•
It does not work even in “Power On”.
➤
➤
Please check whether a videotape is inserted in.
Try to insert a plug again.
•
A videotape is not inputted in.
➤
➤
➤
Please check whether a power plug is inserted in an electric outlet.
Please check whether a videotape is in.
Please check whether a videotape is inserted in a right direction (a
side of transparent window should be on the upside)
Have you inputted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
When a videotape forces to be ejected, the tape may not be inputted. In
the case, please pull out an outlet, and then push the tape smoothly.
➤
➤
•
On inputting a videotape, the tape is
re-ejected.
➤
That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
•
A videotape is not ejected.
➤
In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull out
a power plug for about 10mins and then press “EJECT” button.
•
A channel on video and a play screen
does not appear.
➤
➤
➤
➤
Please check your antenna’s connection.
TV channel should be fixed on video channel.
Please check your antenna’s signal whether it may be weak. In case of its
weakness, please use a frequency amplifier connected with the device.
Press “TV/VCR” and then let “VCR” is displayed on the display panel.
•
Noise (screen noise) appears on
screen.
➤
➤
➤
While in no use of VCR, was it turned on?
While in recording a program, do you watch another channel?
Select TV by pressing [TV/VCR] button on remote control.
•
Noise appears on screen after
recording.
➤
While in playing a videotape, there may happen some noise or blot
in the part of the beginning of a videotape or resuming “PAUSE”,
which are not breakdown.
•
While in playing, noise appears.
➤
Please press “TRACKING” for better screen. Videotape may be
poor. Try to change it to another one.
•
•
Sound and screen are irregular.
Sound comes out but screen does not
appear.
Screen is irregular and stripes appears.
"Screen Error" message is displayed
in a screen.
➤
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
While recording and playing, the top
of screen extremely waves.
➤
A screen is not clear.
➤
•
•
A screen at pause is trembling or
slow screen is not clear.
•
Recording a TV program is
impossible.
Checks
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
•
Once pressing “REC”, a videotape is
ejected automatically.
➤
➤
➤
➤
➤
➤
In case videotape is the one recorded by other products or old one,
stripe may appear on the screen.
Try to adjust the screen by [TRACKING+/-] button
Try to use a head-cleaner.
➤
➤
Try to use a head-cleaner.
Try to adjust the screen by [TRACKING+/-] button.
62
Downloaded From Disc-Player.com Daewoo Manuals
Please check whether the clock is right.
Does the display on your video show “ ” (Ready to timer
recording)? Please make it out.
Please check whether the timer recording info is right.
Please check a tab on a tape whether it is broke or not. (If it was
broken, please scotch-tape it)
•
Timer recording of Cable TV does
not work.
➤
➤
➤
➤
Was a cable data output code connected correctly?
Were a converter manufacturer setup and output channel right?
Did you enter a password? (Please cancel it.)
Did you turn off your player? (Please turn it on.)
•
In spite of pressing “CHANNEL”, a
channel can not be set.
➤
➤
You may not memorize channels.
Please check your channel setting or press a number button.
•
While duplicating, screen is not
clean and distorted.
➤
Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
•
remote control does not work.
➤
➤
Battery may be weak or exhausted.
A receiver of remote control may be different with a sender.
•
Buttons on remote control do not
work.
➤
In case a videotape is positioned in the beginning, “VISS REW” and
“REW” do not work.
In case a videotape is positioned in the end, “FF”, “VISS FF”, “PLAY”
and “REC” do not work.
Please check whether another button is pressed.
➤
Since VCR Play signals are not stable like a TV signals, screen may
be unstable or curved while in playing. To fix the problem, please
horizontal adjustment.
For recording, you should use videotape with a tab.
Please check whether a channel is fixed on video. If not, you have to
turn it into “TV” by pressing “INPUT” button.
Please check whether the timer recording info is right.
Are RF cables inputted antenna connection terminal correctly?
Does a CH number selected in display section appear?
Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
Check whether a tape attached with a recording tap is inserted.
Check whether the screen is displayed in VCR Only Channel. Press
[INPUT] button in this remote controller to adjust in "General
Broadcast" condition.
Is the rounded line (RF cable) connected in "ANT.IN" terminal?
Is the selected channel number shown in Display?
Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
➤
•
VISS index search does not work.
➤
➤
•
Cable broadcasting can not be
selected.
➤
Are you playing a tape that is not recorded in this recorder? (Try to
record it with the recorder.)
You may start recording it in “REC-PAUSE”. Please start recording it
from stop condition.
Please select “CABLE” not “NETWORK” from the “CHANNEL
SETTING”.
The others
•
Symptom
Checks
•
•
•
Before doubting about troubles (VCR)
63
Before doubting about troubles (DVD)
Symptom
•
The recorder does not play.
Checks
➤
➤
➤
•
•
•
•
•
No sound comes through.
A disc is playing but screen does not
appear or poor screen appears.
Sound is irregular
REMOTE does not work.
Dolby Digital sound does not work
➤
If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region code 2 or All.
Please check whether a DVD is inserted in a right direction.
If it is a CD-ROM for PC or DVD-ROM, it does not work.
Weight
4.6kg
Dimension (W x H x D)
435mmx93mmx255mm (without foot), 435mmx98mmx255mm (with foot)
Operative temperature
+5°C~40°C
Installation condition
Horizontal / Relative humidity under 80%
Signal type
PAL COLOR
Did you turn on your TV sets?
Did you connect the parts in right way?
The play may be in “PAUSE”.
A disc may have some contaminants or be damaged.
A disc may be bad one.
Antenna Input/output
U/V-mixed: 75Ω unbalanced
VIDEO input
1.0Vp-p (unbalanced, RCA JACK)
➤
➤
➤
Please check the connection with Dolby Digital amplifier.
Please check the plugs are connected with one another tightly.
Some contaminants may be remained in connection terminal.
VIDEO output (DVD only)
RGB output (75Ω In load R: 0.7Vp-p, G:0.7Vp-p, B:0.7Vp-p)
AUDIO output (common use of DVD and VCR)
Audio output terminal (2 kinds): -5.8dBm(VCR), 2Vrms(DVD), RCA JACK
➤
➤
➤
Please check the degree of remote control, distance or any interruption.
Battery may be weak or exhausted.
When you operate DVD, use it by pressing [DVD] button.
AUDIO output (DVD only)
Analogue AUDIO output : 2.0Vrms
Playable tape
Very high dense tapes with VHS marks
➤
➤
➤
Dolby Digital sound can be worked in the Dolby Digital amplifier only.
Please check “Dolby Digital ” mark on your DVD.
In case of playing it through digital output, while pressing “STOP”,
please check whether “Digital Output” is “Bitstream” by pressing
“SETUP”.
Please check the connection is correct.
Playable disc
DVD, VIDEO-CD, CD (12cm), CD (8cm), MP3, CD-R, CD-RW
Tape speed
SP: 23.39mm/s, LP: 11.70mm/s
AUDIO input
-8.8dBm, RCA JACK
VIDEO output (common use of DVD and VCR)
VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK, SCART JACK
Digital audio output (COAXIAL)
SP: 3hrs, LP: 6hrs (use of E180tape)
If a DVD does not include language information, it does not support
the function.
Time Recording
8 programs a month
Persistence in power failure
1min
VIDEO S/N (VCR)
Over 43dB(Standard recording)
“ANGLE” is supported only in a DVD contains multi angle scenes. Also
a user can confirm the support with the “ANGLE” mark on screen.
•
“MENU” does not appear while a
DVD is playing.
➤
➤
➤
Please check the degree of remote control, distance or any interruption.
Please check a battery in remote control whether it is exhausted or not.
A DVD may not contain menu information.
➤
635nm (DVD), 730nm (CD)
24 hrs
➤
➤
5mW (continuous wave max.)
Wave length
Clock display
“ANGLE” button does not work
while a DVD is playing.
➤
Laser output
Playtime
•
Any MP3 (CD-R) file isn’t displayed.
20W
➤
➤
➤
➤
➤
➤
•
200-240V~, 50/60Hz
Consumed electricity
➤
➤
➤
“AUDIO” or “SUBTITLE” button
does not work.
• The file name of MP3 (CD-R) appears
with strange letters.
Power
Play mode may be “SLOW” or “PAUSE”(In abnormal speed play,
no sound comes through)
Did you connect the parts in right way?
Please check the operative condition of TV or amplifier.
From SETUP, please check “AUDIO” items.
➤
•
Specifications
The file name of MP3 recognize only the Alphabet (A~Z, a~z),
numbers (0~9) and a special symbol on keyboard (~, !, @, #, $ ....)
and 10 letters can be displayed in maximum.
The letters except above case will be displayed like “----”.
If the surface of disc is injured, the file display and playback can be
impossible.
Resolution
VCR
Over 240 lines (Standard recording)
DVD
Over 400 lines (Playback DVD)
AUDIO (VCR)
Over 65dB
AUDIO (DVD)
90dB
AUDIO dynamic range
90dB
DVD Audio output standards
Analogue Audio output
Digital Audio output
64
Downloaded From Disc-Player.com Daewoo Manuals
DVD
48/96KHz sampling
48KHz sampling
Disc type
VIDEO-CD
44.1KHz sampling
44.1KHz sampling
The others
Output
CD
44.1KHz sampling
44.1KHz sampling
65
QUICK START GUIDE FOR SORTING CHANNELS ON THE DVD COMBO
Once the ‘Auto Set’ function has been completed the On Screen Display will show a list of the
channels which it has found, displayed in the order it found them.
It is unlikely, that they will be in the correct oder ie. ARD as PR01, ZDF as PR02, P-03 as PR03, p-04
as PR04 and MTV as PR05.
Therefore, it will be necessary to Sort the channels displayed, into the correct order.
Please follow the following procedure.
1 Press the [VCR] button to select the VCR mode.
STOP
SP
PR01 P-01
2 Press the [SETUP] button.
SETUP
3 Select the ‘PR PRESET’ using [ …/††] buttons and press the [OK/ENTER]
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
button.
4 Select the ‘PR ALIGN’ using [ …/††] buttons and press the [OK/ENTER]
PR+/-:SELECT
OK:CONFIRM
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
button.
5 Select the channel that needs to be moved and press the [OK/ENTER]
button.
PR+/-:SELECT
OK:CONFIRM
6 Press the [OK/ENTER] button in order to select the ‘PR’ number which
PR01
PR02
PR03
PR04
PR05
PR06
PR07
† ] buttons.
you want to place the current selected channel using [ …/†
ie. PR01 ARD. And press the [OK/ENTER] button to confirm.
SETUP:END
SETUP:END
PR ALIGN
P-01
ZDF
P-03
P-04
MTV
ARD
P-07
PR08
PR09
PR10
PR11
PR12
PR13
PR14
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
P-08
P-09
P-10
P-11
----------
➝
SETUP:END
PR ALIGN
Repeat above 5-6 steps to align the other channels.
PR01 ARD
PR02 P-01
PR03 ZDF
PR04 P-03
PR05 P-04
PR06 MTV
PR07 P-07
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
PR08
PR09
PR10
PR11
PR12
PR13
PR14
P-08
P-09
P-10
P-11
----------
➝
Downloaded From Disc-Player.com Daewoo Manuals
SETUP:END
INSTRUCTION MANUAL
DVD PLAYER+VIDEO CASSETTE RECORDER
SF-7300
ENGLISH
Please read this manual carefully before connecting your DVD+VCR and operating it
for the first time.
Keep the manual in a safe place for future reference.
P/N: 97P95600D0
Downloaded From Disc-Player.com Daewoo Manuals
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement