CANARM FT-6 floor lamps, FT-6 table lamps Instruction manual
Below you will find brief information for floor lamps FT-6, table lamps FT-6. The instructions will guide you through the assembly process of the lamp and explain how to install the bulb. Ensure that the power is off before you assemble the lamp. When connecting the lamp to power ensure that the wide blade of the plug is matched to the wide slot and is fully inserted.
Advertisement
Advertisement
Advertisement
Key features
- Easy assembly
- Easy to install bulb
- Safety precautions
- Detailed instructions
Frequently asked questions
Follow the steps provided in the instruction manual. Make sure to match the wide blade of the plug to the wide slot and fully insert it.
The instruction manual specifies the proper bulb type and wattage for the lamp. Please refer to the manual for details.
You can proceed to step #3 of the assembly instructions.
No. It is crucial to avoid plugging in the lamp before completing the installation. Make sure that the power is off during the assembly process.
You can contact CANARM at 1-800-265-1833 (English) or 1-800-567-2513 (French)