Bogen CC4021/CC4041 Spec
CC Series Amplifiers
Models CC4021 & CC4041
CC4021
Description
CC4041
These compact mixer-amplifiers provide 40 watts of output power. Model CC4021 has two inputs:
1 balanced MIC/Line and 1 unbalanced AUX with individual volume controls. Model CC4041 has
4 inputs: 3 balanced MIC/Line and 1 unbalanced AUX with individual volume controls. Features include
priority muting which can be disabled, individual phantom power on all MIC inputs, bass and treble
controls, peak and signal indicators, and a REC Output.
They are compatible with 70V, 25V, 4-ohm, and 8-ohm speaker systems. The units measure two rack
spaces in height, but are only 8-1/4” wide allowing for two units to be placed side-by-side without
requiring additional rack spaces. An optional rack mount adapter is available for single and side-byside configurations.
Features
• 40 Watts of output power
• Bass and treble controls
• 2 Inputs on Model CC4021:
1 balanced MIC/Line;
1 unbalanced AUX
• Compatible with 70V, 25V, 4-ohm,
and 8-ohm systems
• 4 Inputs on Model CC4041:
3 balanced MIC/Line;
1 unbalanced AUX
• Peak indicator
• Individual phantom power for
MIC inputs
• External 24V DC supply input
• Volume controls for each input
• Input 1 can mute other inputs
• Audio-activated muting
• REC Output
• Signal indicator
• Listed to UL Standard 60065
for US and Canada
• Optional rack mount adapter available for
single and side-by-side configurations
(sold separately)
• Defeatable muting
Architect
and Engineer
Specifications
The amplifier shall be a compact mixer-amplifier
that provides 40 watts of output power. The unit
shall provide [for Model CC4021]: 2 inputs (1 balanced MIC/Line and 1 unbalanced AUX) [or for
Model CC4041]: 4 inputs (3 balanced MIC/Line
and 1 unbalanced AUX). Input 1 shall be able to
mute other inputs, and muting shall be audioactivated or defeatable. Unit shall have individual
phantom power for all MIC inputs.
The amplifier shall include bass and treble controls,
peak and signal indicators, and a REC Output.
The amplifiers shall be compatible with 70V, 25V,
4-ohm, and 8-ohm speaker systems. An external
24V DC, 3A external supply input shall be included.
The units shall measure two rack spaces in
height, and be no wider than 8-1/4” so as to allow
two units to be placed side-by-side without requiring additional rack spaces. An optional rack
mount adapter shall also be available for single
and side-by-side configurations. The amplifier
dimensions shall be 8-1/4” W x 3-1/2” H x
10-3/8” D, and shall weigh 10 pounds.
The amplifier shall be listed to UL Standard 60065
for US and Canada.
Specifications subject to change without notice.
© 2013 Bogen Communications, Inc.
54-8023-61A 1301
CC4041 Rear Panel
CC4021 Rear Panel
Technical
Specifications
Output Power .......................... 40W; 1 kHz @ rated distortion
Frequency Response
Balanced LINE/MIC ................ 100 Hz to 20 kHz; 0/-3 dB
Unbalanced Input .................. 80 Hz to 20 kHz; 0/-3 dB
Distortion
Balanced LINE/MIC ................ < 1% THD+N
Unbalanced Input .................. < 1% THD+N
Output Regulation .................. 2 dBr or better no-load to full-load
Output Impedance .................. 70V, 25V, 4 ohms, 8 ohms
REC Output ............................ 1.14V @ Full Rated Power (FRP)
Maximum Sensitivity
Balanced MIC ........................ 1.5 mVrms (200 ohms)
Balanced LINE........................ 150 mVrms (200 ohms)
Unbalanced RCA Input .......... 100 mVrms (10k ohms)
Maximum Input Level
Balanced MIC ........................ 100 mVrms
Balanced LINE........................ 6 Vrms
Unbalanced Input .................. 5 Vrms
Signal to Noise AUX
Fundamental ..........................
Balanced MIC ........................
Balanced LINE........................
Unbalanced Input ..................
-74
-59
-70
-70
dBr
dBr
dBr
dBr
minimum
minimum
minimum
minimum
referenced
referenced
referenced
referenced
to
to
to
to
FRP
FRP
FRP
FRP
Bass & Treble
Bass........................................ +/- 10 dBr @ 100 Hz referenced to mid-band
Treble...................................... +/- 10 dBr @ 10 kHz referenced to mid-band
VOX Trigger & Muting
Input 1 Trigger Level .............. 25mV (approx.)
VOX Release Delay .............. 4 (+/- 1) sec.
Muting Level .......................... > -60 dBr
Phantom Power ...................... 12V DC min., 18V DC max.
Max. Ambient Temp. .............. 100 deg. F (non-condensing)
Thermal Emissions ................ 141.5 BTU/hr. (full power)
External Supply ...................... 24V DC; 3A
Dimensions ............................ 8-1/4” W x 3-1/2” H x 10-3/8” D
Product Weight ...................... 10 lb.
Listings .................................... Listed to UL Standard 60065 for US and Canada
Accessories
RPK93
Rack Mount
Adapter
50 Spring Street, Ramsey, NJ 07446, USA
Tel.: 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement