TALEXXchain P503

U – LED modules, converters and systems
SIGNAGE
Uchain P503-2
uchain STANDARD
Product description
T
•LED chain for highlighting lines and edges and for backlighting
complex contours, letters and symbols in signage applications
•Edge injection of transparent or diffuse materials
U
•High-power LED in chip-on-board technology (COB)
•Integrated current source to stabilise luminous flux
•Flexible chain, can be split between any module
•Beam characteristic: 140°
•Mounting with double-sided adhesive tape (not included)
O
•Connection: Cable 200 mm, both sides
•For uniform backlighting: minimum distance to cover 20 – 30 mm
Technical data
-25 ... +50 °C
tc point1
75 °C
Risk group (EN 62471:2008)
0
D
Ambient temperature ta
È
Standards, page 2
AS
E
Colour temperatures and tolerances, page 2
Ordering data
Type
Article
number
Colour
Wavelength Colour
Packaging, Packaging,
Packaging
range
temperature
carton
pallet
2 light points per module
LED P503-2 DL 12V
89600595 Daylight white –
6,500 K
5 pc(s).
90 pc(s).
1,260 pc(s).
Specific technical data
Type
Numbers of modules
Typ. luminous flux
per module2
Supply voltage DC3
Typ. current
per module2
Typ. power
per module
Luminous efficacy
Total length
10
8 lm
12 V
11 mA
0.13 W
56 lm/W
960 mm
PH
2 light points per module
LED P503-2 DL 12V
1 If
the max. temperature limits are exceeded, the life of the module will be greatly reduced
or the module may be damaged. For the precise position of the tc point see the above diagram.
2 Tolerance
range for optical and electrical data: ±15 %.
the max. operating voltage leads to an overload on the uchain.
This may in turn result in a reduction in lifetime or even in destruction.
Tolerance range for the supply voltage: 8 V: +2 V / -0 V; 12 V: +2 V / -0 V.
3 Exceeding
All values for ta = 25 °C.
Data sheet 03/13-821-10
Subject to change without notice.
www.tridonic.com
1
U – LED modules, converters and systems
SIGNAGE
Converter matrix – Uchain P503-2
IN-BUILT LCU
LCU
015/12
D010
Type
Article number
LED P503-2 DL 12V
89600595
24166316
LCU
060/12
D010
LCU
100/12
D010
24166318 24166322 24166326
LCU
150/12
D010
LCU
035/12
E020
24166331
24166319
LCU
060/12
E020
LCU
100/12
E020
24166323 24166327
LCU
150/12
E020
24166332
Assignable converter
Assignable converter
Number of modules
Number of modules
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
Min. Max. Min. Max. Min. Max. Min. Max.
10
30
100
35
234
50
401 100 668 200 1003
234
Max.
chaining
T
Article number
LCU
035/12
D010
50
401 100 668 200 1003
10
U
Type
REMOTE LCU
U chains in conjunction with water
• EN 62031
• EN 62471
• Admissible Environmental Conditions:
The LED modules are provided with a protective coating to guard against superficial dewing (according to JEDEC JESD22 A100C) and high relative air humidity.
If the protective coating is damaged (for example during soldering) it must be
rebuild to sustain the same level of protection.
• Harmful Environmental Conditions:
The product is not designed to be operated in contact with water.
The product meets the “inbuilt LED module“ classification according to EN 62031.
Certificates
• UL file: e313318
O
Standards
tc temperature in °C
D
EOS/ESD safety guidelines
Luminous flux in %
80
70
50
80
70
50
22,000
35,000
65,000
19,000
30,000
55,000
AS
E
45
75
The device / module contains components that are sensitive to electrostatic discharge and may only be installed in the factory and on site if
appropriate EOS/ESD protection measures have been taken. No special
measures need be taken for devices/modules with enclosed casings
(contact with the pc board not possible), just normal installation practice. Please note the requirements set out in the document EOS / ESD
guidelines (Guideline_EOS_ESD.pdf) at:
http://www.tridonic.com/com/en/technical-docs.asp
Life time in h
Coordinates and tolerances according to CIE 1964
0,3450
0,3400
0,3350
0,3300
0,3250
0,3200
0,3150
0,3100
Data sheet 03/13-821-10
Subject to change without notice.
www.tridonic.com
0,3400
0,3350
0,3300
0,3250
0,3200
0,3050
0,3150
MacAdam ellipse: 5SDCM
y0
0.3270
0,3100
x0
0.3200
PH
Centre
Daylight white
0,3050
6,500 K
0,3000
CIE coordinates:
2

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project