15410
Shop Drawing Submittal Label
PROJECT NO: 2008-00035-000
PROJECT
Big Blue Bus
DATE
11/23/10
CONTRACTOR/SUPPLIER
Thomco Construction
DESCRIPTION
Plumbing Fixtures
SPECIFICATION NO.
15410
COMMENTS
WC-1 & WC-2 American Standard
2257.001, High
Efficiency Wall Hung Toilet newer
version to 3355.128 for
your approval.
WC-1 & WC-2 Sloan 8111-1.28,
High Efficiency Sensor
Operated, Battery Powered
Flushometer Valve.
WC-1 & WC-2 JR Smith 450Y
Vertical Closet Carrier &
Olsonite 10-Ct, Open Front Toilet
Seat.
U-1 American Standard 6590.125
Ultra High Efficiency
Urinal.
U-1 Sloan 8180-0.13 High
Efficiency Sensor Operated,
Battery Powered Flushometer
Valve.
L-1 & L-2 American Standard
0600.000 Under counters Lavatory
to fit per plan detail for your
approval.
L-1 & L-2 Sloan EBF-650 Sensor
Operated, Battery
Powered Faucet With .5 Gmp Flow
Rate, with Sloan
provided MIX-135A, ASSE 1016
Thermostatic Mixing
Valve.
L-2 Truebro Soft Guard Plus
lavatory insulation.
SH-1 & SH-2 Symmons
Temptrol® li (Bp Series) Shower
System 1-1912RS-FSB-56-1.5
SH-1 & SH-2 JR Smith 2005,
Shower Drain.
S-1 &S-2 Just SL-ADA-2017-A-GR
Stainless Steel Sink
S-1 American Standard 6274.000
Faucet.
S-2 American Standard 6275.000,
Insinkerator F-HC1100
Hot & Cool water dispenser, Elkay
ERS1, Remote Water Chiller for
your approval.
S-2 Insinkerator Badger 5 garbage
disposer for your
approval.
HB-1 Woodford, Y-24 Hose Bibb
for your approval.
Thomco Job # 2708
RECORD OF CONTRACTOR SUBMITTAL
TO:
City of Santa Monica
Civil Engineering & Architectural Services
1437 4th Street, Suite 300
Santa Monica, CA 90401
ATTN:
Mr. Greg de Vinck, P.E. Construction Manager
Submittal #: 15410
Date: 11/16/2010
PROJECT: Big Blue Bus Tenant Improvement Project
PROJECT No.: 2008-00035-000
PRIORITY:
URGENT
NORMAL
RESPONSE REQUIRED
FOR:
INFORMATION ONLY
SENT BY:
HAND DELIVER
AS REQUESTED
U.S. MAIL
REFERENCE
FTP -Upload
YOUR FILES
Email
FOR APPROVAL
No.
COPIES
SPECIFICATION
DATED
DESCRIPTION
1
1
15410-1.3A
11/16/2010
General: Plumbing Materials
2
1
15410-1.3B /1.3C
11/16/2010
3
1
15410-1.3B /1.3C/ 1.3D
11/16/2010
4
1
15410-1.3B /1.3C
11/16/2010
5
1
15410-1.3B /1.3C
11/16/2010
6
1
15410-1.3B /1.3C/ 1.3D
11/16/2010
7
1
15410-1.3B /1.3C
11/16/2010
8
1
15410-1.3B /1.3C/ 1.3D
11/16/2010
9
1
15410-1.3B /1.3C
11/16/2010
L-2 Truebro Soft Guard Plus lavatory insulation.
10
1
15410-1.3B /1.3C
11/16/2010
SH-1 & SH-2 Symmons Temptrol® li (Bp Series) Shower
System 1-1912RS-FSB-56-1.5
11
1
15410-1.3B /1.3C
11/16/2010
SH-1 & SH-2 JR Smith 2005, Shower Drain.
12
1
15410-1.3B /1.3C
11/16/2010
S-1 &S-2 Just SL-ADA-2017-A-GR Stainless Steel Sink
13
1
15410-1.3B /1.3C
11/16/2010
S-1 American Standard 6274.000 Faucet.
14
1
15410-1.3B /1.3C/ 1.3D
11/16/2010
15
1
15410-1.3B /1.3C/ 1.3D
11/16/2010
16
1
15410-1.3B /1.3C
11/16/2010
WC-1 & WC-2 American Standard 2257.001, High
Efficiency Wall Hung Toilet newer version to 3355.128 for
your approval.
WC-1 & WC-2 Sloan 8111-1.28, High Efficiency Sensor
Operated, Battery Powered Flushometer Valve.
WC-1 & WC-2 JR Smith 450Y Vertical Closet Carrier &
Olsonite 10-Ct, Open Front Toilet Seat.
U-1 American Standard 6590.125 Ultra High Efficiency
Urinal.
U-1 Sloan 8180-0.13 High Efficiency Sensor Operated,
Battery Powered Flushometer Valve.
L-1 & L-2 American Standard 0600.000 Under counters
Lavatory to fit per plan detail for your approval.
L-1 & L-2 Sloan EBF-650 Sensor Operated, Battery
Powered Faucet With .5 Gmp Flow Rate, with Sloan
provided MIX-135A, ASSE 1016 Thermostatic Mixing
Valve.
S-2 American Standard 6275.000, Insinkerator F-HC1100
Hot & Cool water dispenser, Elkay ERS1, Remote Water
Chiller for your approval.
S-2 Insinkerator Badger 5 garbage disposer for your
approval.
HB-1 Woodford, Y-24 Hose Bibb for your approval.
REMARKS: PLEASE RETURN REVIEWED COMPLETE, STAMPED SUBMITTALS TO THOMCO.
This submittal has been reviewed for conformance to drawings and specifications.
SIGNED:
BenHeretz
Enzo Cottogneti, Project Coordinator
COPIES TO:
A/E of Record or Designer
Owner / Construction Manager:
Thomco Project Superintendent
Subcontractor:
Thomco File: Submittal File
Howard Wilner
3952 West 171 Street, Torrance, California 90504 · (310) 354-7940 · FAX (310) 354-7948 · LICENSE NO. 656826
PLUMBING SUBMITTALS
FOR
BIG BLUE BUS
TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
INDEX
Section
Description
1
Plumbing Materials
2
American Standard 2257.001, High Efficiency Wall Hung Toilet
Symbol
WC-1 & WC-2
Sloan 8111-1.28, High Efficiency Sensor Operated, Battery
Powered Flushometer Valve.
JR Smith 450Y Vertical Closet Carrier
Olsonite 10-Ct, Open Front Toilet Seat
3
American Standard 6590.125 Ultra High Efficiency Urinal
U-1
Sloan 8180-0.13 High Efficiency Sensor Operated, Battery Powered
Flushometer Valve.
4
American Standard 0600.000 Undercounter Lavatory
L-1 & L-2
Sloan EBF-650 Sensor Operated, Battery Powered Faucet With .5
Gpm Flow Rate, with Sloan provided MIX-135A, ASSE 1016
Thermostatic Mixing Valve
Truebro Soft Guard Plus lavatory insulation
5
Symmons Temptrol® Ii (Bp Series) Shower System
1-1912RS-FSB-56-1.5
L-2
SH-1 & SH-2
JR Smith 2005, Shower Drain
6
Just SL-ADA-2017-A-GR Stainless Steel Sink
American Standard 6274.000 Faucet
S-1 & S-2
S-1 only
American Standard 6275.000
S-2 only
Insinkerator F-HC1100 Hot & Cool water dispenser
Elkay ERS1, Remote Water Chiller
Insinkerator Badger 5 garbage disposer
7
Woodford, Y-24 hose bibb
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
S-2 only
HB-1
SECTION 1
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
Piping Materials:
Sanitary waste and vent:
Cast iron no-hub pipe and fittings joined with stainless steel no-hub couplings.
Waste and vent piping 2” and smaller, above grade, may be type DWV copper tube with
drainage pattern fittings joined with lead free solder.
Domestic hot and cold water piping:
Type L copper with wrought copper fittings joined with lead free solder
Pipe Hangers:
Pipe hangers for piping 4” and smaller shall be adjustable band type hangers as
manufactured by Tolco, or of equal manufacturer.
Pipe hangers for copper water piping shall be felt lined.
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
SECTION 2
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
"'8"--–'MP8JTF¡&-0/("5&%
'-64)7"-7&50*-&5
7*53&064$)*/"-&44&7&3$-&"/ ¡
BARRIER FREE
"'8"--–'MP8JTF ¡&-0/("5&%50*-&5
-&44&7&3$-&"/ ¡
r 'MVTIWBMWFUPJMFU
r 7JUSFPVTDIJOB
r $POWFOUJPOBMHMB[F
r .FFUTEFàOJUJPOGPS)&5)JHI&GàDJFODZ5PJMFU
r)JHI&GàDJFODZ-QGHQG
r 8JMMBMTPGVODUJPOBUHQGBOEHQGXJUIB
QSPQFSMZTFUEVBMáVTIWBMWF
r 8BMMNPVOUFEFMPOHBUFECPXM
r 'VMMZHMB[FEUSBQXBZ
r %JSFDUGFETJQIPOKFUBDUJPO
r JOMFUTQVE
r 'VMMZHMB[FEUSBQXBZ
r YXBUFSTVSGBDFBSFB
r GBDUPSZáVTIUFTUFE
P &MPOHBUFE6OJWFSTBMCPXMPOMZ
UPQTQVE
P &MPOHBUFE6OJWFSTBMCPXMPOMZUPQ
TQVEXJUITMPUUFESJNGPSCFEQBOIPMEJOH
8IJUFPOMZ
P &MPOHBUFE6OJWFSTBMCPXMPOMZ
CBDLTQVE
4&&3&7&34&'03306()*/(*/%*.&/4*0/4
5P#F4QFDJàFE
P$PMPSP8IJUFP#POF
P4FBU"NFSJDBO4UBOEBSE4FBU
P"NFSJDBO4UBOEBSE4FBUXJUI&WFS$MFBO ¡
P"MUFSOBUF4FBU)FBWZ%VUZ
"NFSJDBO4UBOEBSE4FBU
P)FBWZ%VUZ"NFSJDBO4UBOEBSE4FBU
XJUI&WFS$MFBO
P'MVTI7BMWF
P"NFSJDBO4UBOEBSE4FMFDUSPOJD–
%$1PXFS5PQ4QVE
P"NFSJDBO4UBOEBSE4FMFDUSPOJD–
%$1PXFS$PODFBMFE#BDL4QVE
P"NFSJDBO4UBOEBSE4FMFDUSPOJD–
"$1PXFS$PODFBMFE#BDL4QVE
P"NFSJDBO4UBOEBSE4FMFDUSPOJD–
.VMUJ"$1PXFS$PODFBMFE#BDL4QVE
P$BSSJFS'JUUJOHCZPUIFST
$PNQPOFOU1BSUT
P "*OMFU4QVEGVSOJTIFEXJUICPXM
/PNJOBM%JNFOTJPOT
YYNNYY
3FDPNNFOEFEXPSLJOHQSFTTVSFmCFUXFFO
QTJBUWBMWFXIFOáVTIJOHBOEQTJTUBUJD
'JYUVSFPOMZMFTTTFBUCPMUDBQTBOEáVTIWBMWF
$PNQMJBODF$FSUJàDBUJPOT
.FFUTPS&YDFFETUIF'PMMPXJOH4QFDJàDBUJPOT
r"4.&"$4"#GPS7JUSFPVT
$IJOB'JYUVSFT
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES - CHECK LOCAL CODES.
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
When installed so top of seat is 432 to 483mm (17" to 19") from the
finished floor.
.
¥"4"NFSJDB*OD
3FWJTFE
"'8"--–'MP8JTF¡&-0/("5&%
'-64)7"-7&50*-&5
7*53&064$)*/"-&44&7&3$-&"/ ¡
BARRIER FREE
1" N.P.T. OR C.W.T. SUPPLY
AS REQUIRED TO FLUSH VALVE
FINISHED WALL
C/L
660mm
(26")
121mm
(4-3/4")
73mm
(2-7/8")
470mm
(18-1/2")
356mm
(14")
(4") 22mm 292mm
(7/8") (11-1/2")
HOLES
1-1/2" SPUD
C/L OF SEAT POST
HOLES 140 mm
(5-1/2 ") CENTER
19mm
(3/4")
95mm
(3-3/4")
330mm
(13")
229mm
(9")
381mm
(15")
FINISHED
FLOOR
70mm
(2-3/4")
133mm
(5-1/4")
191mm
(7-1/2")
133mm
(5-1/4")
C/L OF
OUTLET
32 mm
(1-1/4")
FINISHED WALL
660mm
(26")
76mm(3) DIA. HOLE IN WALL
FOR 1-1/2" SPUD
C/L
470mm
(18-1/2")
356mm
(14")
C/L OF SEAT POST HOLES
140mm(5-1/2") CENTERS
(3/4")
19mm
95mm
(3-3/4")
330mm
(13")
70mm
(2-3/4")
133mm
(5-1/4")
FINISHED
FLOOR
89mm
(3-1/2")
(4) 22mm (7/8")
DIA. HOLES
381mm
(15")
C/L OF
OUTLET
229mm
(9")
191mm
(7-1/2")
283mm
(11-1/8")
330mm
(13")
133mm
(5-1/4")
32mm
(1-1/4")
/05&4
M5PJMFUEFTJHOFEUPNFFU"%"BDDFTTJCJMJUZTUBOEBSETXIFOUPQPGTFBUIFJHIUTFUBU
UPNNUP
GSPNàOJTIFEáPPS
130%6$54)08/4".&"4&9$&158*5)4-055&%3*.'03#&%
1"/)0-%*/(
8"45&065-&54&"-3*/(.645#&/&013&/&03(3"1)*5&'&-58"93*/(
/053&$0..&/%&%
46((&45&%NN
$-&"3"/$&#&58&&/'"$&0'8"--"/%#"$,0'#08-
50$0.1-:8*5)"3&"$0%&(07&3/*/(5)&)&*()50'7"$66.#3&",&30/
5)&'-64)0.&5&37"-7&5)&1-6.#&3.6457&3*':%*.&/4*0/44)08/'03
4611-:306()*/(
'-64)0.&5&37"-7&/05*/$-6%&%8*5)'*9563&"/%.645#&
03%&3&%4&1"3"5&-:
$"33*&3'*55*/("43&26*3&%50#&'63/*4)&%#:05)&34
1307*%&46*5"#-&3&*/'03$&.&/5'03"--8"--4611035
*.1035"/5%JNFOTJPOTPGàYUVSFTBSFOPNJOBMBOENBZWBSZXJUIJOUIFSBOHFPG
UPMFSBODFTFTUBCMJTIFECZ"/4*4UBOEBSE"
5IFTFNFBTVSFNFOUTBSFTVCKFDUUPDIBOHFPSDBODFMMBUJPO/PSFTQPOTJCJMJUZJTBTTVNFEGPS
VTFPGTVQFSTFEFEPSWPJEFEQBHFT
.
¥"4"NFSJDB*OD
3FWJTFE
Model
8111-1.28
OPTIMA SYSTEMS
Battery Powered Flushometers
Description
Exposed, Battery Powered, Sensor Operated G2® Model Water Closet
Flushometer for floor mounted or wall hung top spud bowls.
Flush Cycle
Model 8111-1.28 High Efficiency (1.28 gpf/4.8 Lpf)
Note: Valve may not function with all bowls. Be sure to verify flow
requirements with bowl manufacturer or call Sloan Valve Company.
Specifications
Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for
either left or right hand supply with the following features:
• PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• Flex Tube Diaphragm designed for improved life and reduced
maintenance
• ADA Compliant OPTIMA Plus® Battery Powered Infrared Sensor for
automatic “No Hands” operation
• Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high
and low target detection
• Latching Solenoid Operator
• Engineered Metal Cover with replaceable Lens Window
• User friendly three (3) second Flush Delay
• Courtesy Flush™ Override Button
• Four (4) Size AA Batteries factory installed
• “Low Battery” Flashing LED
• Infrared Sensor Range Adjustment Screw
• Initial Set-up Range Indicator Light (first 10 minutes)
• Chrome Plated Metal Handle Cap
• 1” I.P.S. Screwdriver Bak-Chek® Angle Stop
• Free Spinning, Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece
Bottom Hex Coupling Nut
• Spud Coupling and Flange for 1½” Top Spud
• Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Fixed Metering Bypass and No External Volume Adjustment to Ensure
Water Conservation
• Flush Accuracy Controlled by CID™ Technology
• Diaphragm, Stop Seat and Vacuum Breaker molded from PERMEX™
Rubber Compound for Chloramine resistance
• 100% of the energy used in manufacturing is offset with Renewable
Energy Sources – Wind Energy
Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM
Alloy Classification for Semi-Red Brass. Valve shall be in compliance with
the applicable sections of ASSE 1037 and ANSI/ASME A112.19.2.
Installation conforms to ADA requirements.
Variations
Special Finishes
LH
PB
BN
SF
Valve Body Supplied Less Handle Opening
Polished Brass (PVD Finish)
Brushed Nickel (PVD Finish)
Satin Chrome
See Accessories Section and OPTIMA Accessories Section of the Sloan
catalog for details on these and other OPTIMA Plus® Flushometer
variations.
Made with
Renewable Energy
ADA Compliant
Functional & Hygienic
Automatic
Sloan G2 Optima Plus® Flushometers activate via multilobular sensor detection to provide the ultimate in
sanitary protection and automatic operation. A battery
powered infrared sensor sets the flushing mechanism
after the user is detected and completes the flush
when the user steps away.
Touchless, sensor operation eliminates the need for
user contact to help control the spread of infectious
diseases. The G2 Optima Plus Flushometer is provided
with an Override Button to allow a "courtesy flush" for
individual user comfort.
Economical
Warranty
Sloan installed batteries speed installation and provide
years of metered flushing to control the use of water
and energy. Batteries can be changed without turning
off the water.
3 year (limited)
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
This space for Architect/Engineer approval
SANTA MONICA, CALIFORNIA
Job Name
Date
Model Specified
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
G2 Optima Plus 8111-1.28 S.S. — Rev. 0 (03/09)
The information contained in this document is subject to change without notice.
Model
8111-1.28
Description
Exposed, Battery Powered, Sensor Operated G2® Model Water Closet
Flushometer for floor mounted or wall hung top spud bowls.
Flush Cycle
Model 8111-1.28 High Efficiency (1.28 gpf/4.8 Lpf)
Note: Valve may not function with all bowls. Be sure to verify flow requirements with bowl
manufacturer or call Sloan Valve Company.
ELECTRICAL SPECIFICATIONS
Control Circuit
Solid State
6 VDC Input
8 Second Arming Delay
3 Second Flush Delay
OPTIMA Sensor Type
Active Infrared
OPTIMA Sensor Range
Nominal 22” - 42” (559 mm -1067
mm), Adjustable ± 8” (203 mm)
Battery Type
(4) AA Alkaline
Battery Life
3 Years @ 4,000 Flushes/Month
Indicator Lights
Range Adjustment/Low Battery
Operating Pressure
15 - 100 psi (104 - 689 kPa)
Sentinel Flush
Once Every 24 Hours After the Last
Flush
OPERATION
1. A continuous, invisible light
beam is emitted from the
OPTIMA Plus Sensor.
3. When the user steps away
from the OPTIMA Plus
Sensor, the circuit waits 3
seconds (to prevent false
flushing) then initiates an
electrical signal that operates
the Solenoid. This initiates
the flushing cycle to flush the
fixture. The Circuit then
automatically resets and is
ready for the next user.
2. As the user enters the beam’s
effective range (22” to 42”)
the beam is reflected into the
OPTIMA Plus Scanner
Window and transformed into
a low voltage electrical
circuit. Once activated, the
Output Circuit continues in a
“hold” mode for as long as
the user remains within the
effective range of the Sensor.
VALVE ROUGH-IN
Typical Water Closet Installation
Model 8111
2¼” (57 mm) MIN.
11½”
(292 mm)
FINISHED
WALL
16½”
(419 mm)
1” I.P.S.
(25 mm DN)
SUPPLY
C/L OF
FIXTURE
4¾”
(121 mm)
When installing the G2 Optima Plus in a handicap stall:
Per the ADA Guidelines (section 604.9.4) it is recommended
that the grab bars be split or shifted to the wide side of the stall.
C/L OF WASTE
FINISHED
FLOOR
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
Copyright © 2009 Sloan Valve Company
Made in the U.S.A.
G2 Optima Plus 8111-1.28 S.S. — Rev. 0 (03/09)
LOCATION
ASPE
®
P
CUSTOMER
DRIVEN
EN e
r
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
MEMBER OF:
BIG BLUE BUS TENANT IMPROVEMENT
PROJECT
SANTA MONICA, CALIFORNIA
NITARY
SA
®
DIVISION OF SMITH INDUSTRIES, INC.
G
G
SMITH MFG. CO.
®
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
re
K
SMITH ® JAY R.
NO-HUB VERTICAL FITTINGS
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S0230Y
A
SINGLE
Rear Support Lug and -M51 Anchor
Foot Assembly Regularly Furnished.
6 1/2(165)
c
F
7
(180)
1 (25)
Finished Wall
DOUBLE
c
7
(180)
Neoprene Face Plate Gasket
CR
CM
FIGURE
NUMBER
c
7
(180)
1 (25)
4" (100) Adjus-to-Wall Coupling
C
C
D
D
Closet Outlet Gasket
Thrust Bearing
Nuts and Washers
E
E
Base Support
Fig. 0230Y
Side View
Fig. 0230DY
Side View
5 1/4 (135)
9 (230)
A
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
SIZE
SCALE:
FOR SIPHON JET WATER CLOSETS - SHALLOW ROUGH-IN TYPE
2" (51) Vent
0230Y
DRAWN BY:
CHECKED BY:
APPROVED BY:
DATE:
2-28-86
NONE
DRAWING NUMBER
ADJUSTABLE FIXTURE SUPPORTS
NOTE: Base support must be
securely anchored to floor (with
four 1/2" (13) bolts provided by
contractor).
The water closet gasket regularly
furnished is made of molded
neoprene and designed to fit water
closet outlet dimensions and
configurations shown in ANSI
Standard A112.19.2M-1995, Figure
13B. If gasket is not found to be
compatible to fixture due to
nonconformance of said fixture to
ANSI A112.19.2M, then fixture
manufacturer shall be consulted for a
suitable gasket recommendation. Jay
R. Smith assumes no liability for
connections to fixtures which do not
conform to these standards.
7 1/2 (190)
4 1/4* (110) MIN
9 (230) MAX
NOTE: Dimensions shown in
parentheses are in millimeters.
NOTE: 1 1/2" or 2" tapped inlet
available.
4 (100)
Cut Off Tab
A
*NOTE:
9" (230) core drilled hole is required
for rough-in 4 1/4 (110) thru 6 1/2 (165).
18 1/4 (465)
Front View
Fig. 0230Y . . . . NO-HUB
Fig. 0230DY . . . NO-HUB Double
c dimension = 4" (100) (regularly furnished)
consisting of nipple and Adjus-to-Wall
coupling permitting adjustment from 3" (76)
min. to 4" (100) max.
K
J
H
G
F
REV.
5-3-02
10/09/99
7-1-98
1-23-98
6-1-95
DATE
Added Note 1 1/2 or 2 tapped.
Deleted Note
Submittal Update
Chg'd Callout
Added Millimeters
DESCRIPTION
A
C
SIZE
MIN
4 (100)
9 (230)
1 1/2 (38)
5 (125) 11 1/2 (290) 1 1/2 (38)
6 (150) 11 1/2 (290) 1 1/2 (38)
RN
JJ
ASL
EMB
EMB
BS
BS
BS
BS
BY
CKD. BY
WEIGHT
POUNDS
D
E
MAX
4 1/4 (110) 14 (355)
4 1/4 (110) 11 1/2 (290)
4 1/4 (110) 11 1/2 (290)
VOLUME
CUBIC FEET
F
2 1/4 (57)
2 3/4 (70)
3 1/4 (83)
FIGURE NUMBER
0230Y
COMMERCIAL PLASTIC SEAT
SERIES
MODEL 10CT
Seats shall be ___________ as
manufactured by Bemis Manufacturing
Co. Seats shall be extra heavy weight and
injection molded of solid plastic. Seats shall
be open front less cover for elongated bowl
and feature large molded-in bumpers. Seats
shall have STA-TITE®, Commercial Fastening
System™, featuring external check hinges
with 300 Series stainless steel posts and
pintles that stop seat 11 degrees beyond
vertical. Color to be white. Hinges shall be
10CT or 10SSCT.
10CT STA-TITE®, External check hinge stops seat 11°
beyond vertical.
10SSCT STA-TITE®, Stainless steel, self-sustaining and
external check hinge holds seat in any raised position
up to 11° beyond vertical.
5 1/2”
18 1/2”
7 7/8”
19”
3 1/4”
STA-TITE®, COMMERCIAL FASTENING
SYSTEM™, ONE-PIECE INTEGRATED
NUT AND WASHER
EXTERNAL CHECK HINGE
CONTOURED SEAT
14 1/4”
Ring thickness is 13/16”
Ring thickness including the bumper is 1”
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
ASSEMBLE HINGES.
FINGER-TIGHTEN FASTENING NUTS.
Olsonite, Sheboygan Falls, WI 53085
www.Olsonite.com
USING WRENCH, TIGHTEN UNTIL
LOWER PORTION SHEARS OFF.
Phone: 920-467-4621 800-558-7651 Fax: 920-467-8573
SECTION 3
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
8"4)#300,–'MP8JTF¡
6-53")*()&''*$*&/$:63*/"-
7*53&064$)*/"
BARRIER FREE
8"4)#300,–'MP8JTF ¡
6-53")*()&''*$*&/$:63*/"r 7JUSFPVTDIJOB
r 6MUSB)JHI&GàDJFODZ-QGHQG
r 'MVTIJOHSJN
r &MPOHBUFESJNGSPNàOJTIFEXBMM
r 8BTIPVUáVTIBDUJPO
r &YUFOEFETJEFTGPSQSJWBDZ
r JOMFUTQVE
r 0VUMFUDPOOFDUJPOUISFBEFEJOTJEF/15'
r XBMMIBOHFST
r 'JYUVSFPOMZ
r .FFUT"4.&áVTISFRVJSFNFOUTBUHQG
P 5PQTQVE
P #BDLTQVE
/PNJOBM%JNFOTJPOT
YYNN
YY
4&&3&7&34&'03306()*/(*/%*.&/4*0/4
3FDPNNFOEFEXPSLJOHQSFTTVSFmCFUXFFO
QTJBUWBMWFXIFOáVTIJOHBOEQTJTUBUJD
$PNQMJBODF$FSUJàDBUJPOT
.FFUTPS&YDFFETUIF'PMMPXJOH4QFDJàDBUJPOT
r "4.&"$4"#GPS7JUSFPVT
$IJOB'JYUVSFT
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
5P#F4QFDJàFE
P$PMPSP8IJUF
P'MVTI7BMWF
P"NFSJDBO4UBOEBSE4FMFDUSPOJD–
%$1PXFS5PQ4QVE
P"NFSJDBO4UBOEBSE4FMFDUSPOJD–
%$1PXFS#BDL4QVE
.
¥"4"NFSJDB*OD
3FWJTFE
8"4)#300,–'MP8JTF¡
6-53")*()&''*$*&/$:63*/"-
7*53&064$)*/"
BARRIER FREE
501416%
121mm
(4-3/4")
292mm
(11-1/2")
FINISHED
WALL
3/4" S.P.S. OR 3/4" C.W.T.
SUPPLY TO FLUSH VALVE
64mm
(2-1/2")
3/4"
SPUD
K2 HANGERS
8mm X 25mm
(5/16" X 1")
SLOT
343mm
(13-1/2")
470mm
(18-1/2")
438mm
(17-1/4")
235mm
(9-1/4")
457mm
(18")
692mm
(27-1/4")
REF.
355mm
(14")
#"$,416%
13mm
(1/2")
FINISHED
WALL
89mm
(3-1/2")
102mm
(4")
C/L OF
OUTLET
387mm
(15-1/4") MAX
610mm
(24")
OPTIONAL
FINISHED FLOOR
13mm
(1/2")
51mm
(2")
8mm X 25mm
(5/16" X 1")
SLOT
FINISHED WALL
3/4"
SPUD
343mm
(13-1/2")
GASKET
470mm
(18-1/2")
438mm
(17-1/4")
13mm
(1/2")
51mm
(2")
K2 HANGERS
2" N.P.T.
FEMALE OUTLET
CONNECTION
457mm
(18")
692mm
(27-1/4")
REF.
102mm
(4")
235mm
(9-1/4")
355mm
(14")
2" N.P.T.
INSIDE THREADS
13mm
(1/2")
DETAIL OF OUTLET CONNECTION
89mm
(3-1/2")
102mm
(4")
C/L OF
OUTLET
387mm
(15-1/4") MAX
610mm
(24")
OPTIONAL
FINISHED FLOOR
13mm
(1/2")
13mm
(1/2")
FINISHED WALL
2" N.P.T.
FEMALE OUTLET
CONNECTION
GASKET
102mm
(4")
2" N.P.T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
When installed so top of rim is 387mm (15-1/4") from finished floor.
/05&4
'-64)7"-7&/05*/$-6%&%"/%.645#&03%&3&%4&1"3"5&-:
1307*%&46*5"#-&3&*/'03$&.&/5'03"--8"--46110354
*.1035"/5%JNFOTJPOTPGàYUVSFTBSFOPNJOBMBOENBZWBSZXJUIJO
UIFSBOHFPGUPMFSBODFTFTUBCMJTIFECZ"/4*4UBOEBSE"5IFTF
NFBTVSFNFOUTBSFTVCKFDUUPDIBOHFPSDBODFMMBUJPO/PSFTQPOTJCJMJUZJT
BTTVNFEGPSVTFPGTVQFSTFEFEPSWPJEFEQBHFT
.
¥"4"NFSJDB*OD
3FWJTFE
MODELS
8186
Electronic Valve
Description
Exposed, Battery Powered, Sensor Activated Sloan ECOS® Electronic Model
Urinal Flushometer with Smart Sense Technology™.
Flush Cycle
✔ Model 8186-0.13 High Efficiency (0.13 gpf/0.5 Lpf)
Model 8186-0.25 High Efficiency (0.25 gpf/0.9 Lpf)
Model 8186-0.5 High Efficiency (0.5 gpf/1.9 Lpf)
Specifications
Quiet, Exposed, Chrome Plated Urinal Flushometer for either left or right hand
supply with the following features:
For flushing volumes 0.13 gpf and 0.25 gpf:
• Pressure compensating cartridge assembly
• Synthetic rubber seals for chloramine resistance
For flushing volume 0.5 gpf:
• PERMEX™ Synthetic Rubber Flex Tube Diaphragm with twin linear filtered
bypass and vortex cleansing action
• Flush Accuracy Controlled by CID™ Technology
For all flushing volumes:
• Latching Solenoid Operator
• Engineered Metal Cover with replaceable Lens Window
• User friendly three (3) second Flush Delay
• Courtesy Flush™ Override Button (optional)
• Four (4) Size AA Batteries factory installed
• “Low Battery” Flashing LED
• Infrared Sensor Range Adjustment Screw
• Initial Set-up Range Indicator Light (first 10 minutes)
• 3/4” I.P.S. Screwdriver Bak-Chek® Angle Stop
• Free Spinning, Vandal Resistant Stop Cap
• Adjustable Tailpiece
• Spud Coupling and Flange for 3/4” Top Spud
• Reduces water usage up to 80% over standard sensor urinal
• ADA Compliant Sloan ECOS® Battery Powered Infrared Sensor for automatic
“No Hands” operation
• Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low
target detection
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom
Hex Coupling Nut
• Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Fixed Metering Bypass and No External Volume Adjustment to Ensure Water
Conservation
• Stop Seat and Vacuum Breaker molded from PERMEX™ Rubber Compound for
Chloramine resistance
Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve in compliance with the applicable sections
of ASSE 1037. Installation conforms to ADA requirements.
Shown without optional
override button
ADA Compliant
Manual Operation
Sloan ECOS® Electronic Urinal Flushometers are available without
an override button to eliminate unnecessary casual activation. The
Sloan ECOS® Flushometers are offered with an optional Override
Button to allow a “courtesy flush” for individual user comfort.
Automatic Operation
Sloan ECOS® Electronic Flushometers can also be activated via
multi-lobular infrared sensor. By detecting user presence and
duration, the Sloan ECOS® Smart Sense Technology™ will
determine the proper flush volume for unequalled water efficiency.
Smart Sense Technology
The Sloan ECOS® Flushometer is equipped with Smart Sense
Technology™ which applies extended range and logic techniques
to significantly reduce water usage in high use urinal applications;
such as when a continuous line of people, also known as a queue,
forms. In fact during continuous queue, regardless the number of
users, the maximum amount of water used is only 2.0 gallons
(8186-0.5). Please contact Sloan for specific details.
Functional & Hygienic
Touchless, sensor operation eliminates the need for user contact to
help control the spread of infectious diseases.
Warranty
3 year (limited)
Special Finishes
PB
BN
SF
Polished Brass (PVD Finish)
Brushed Nickel (PVD Finish)
Satin Finish
Sloan Valve Company is buying renewable energy
Made with
certificates to meet 100% of the company’s purchased
Renewable Energy
electricity use at its Franklin Park, Illinois facility.
Variations
OR
With Override
Accessories
See Accessories Section and Sloan ECOS® Accessories Section of the Sloan
catalog for details on these and other Sloan ECOS® Flushometer variations.
Fixtures
Consult Sloan for matching Sloan brand fixture options.
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
This space for Architect/Engineer approval
SANTA MONICA, CALIFORNIA
Job Name
Date
Model Specified
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
Sloan ECOS® 8186-0.13/0.25/0.5 S.S. — Rev. 0c (12/09)
The information contained in this document is subject to change without notice.
MODEL
8186
Electronic Valve
Description
Exposed, Battery Powered, Sensor Activated Sloan ECOS® Electronic Model Urinal
Flushometer with Smart Sense Technology™.
2 ¼”
(57 mm)
Flush Cycle
4 ¾”
(121 mm)
✔ Model 8186-0.13 High Efficiency (0.13 gpf/0.5 Lpf)
Model 8186-0.25 High Efficiency (0.25 gpf/0.9 Lpf)
Model 8186-0.5 High Efficiency (0.5 gpf/1.9 Lpf)
5”
(127 mm)
ELECTRICAL SPECIFICATIONS
16 ½”
(419 mm)
Control Circuit
Solid State
6 VDC Input
8 Second Arming Delay
3 Second Flush Delay
OPTIMA Sensor Type
Active Infrared
OPTIMA Sensor Range
Nominal 15” - 30” (381 mm -762 mm),
Adjustable ± 8” (203 mm)
Battery Type
Four (4) AA Alkaline
Battery Life
3 Years @ 4,000 Flushes/Month
Indicator Lights
Range Adjustment/Low Battery
Operating Pressure
15 - 100 psi (104 - 689 kPa)
Sentinel Flush
Once Every 72 Hours After the Last Flush
CL OF
SUPPLY
¾” I.P.S.
SUPPLY
(DN 20 mm)
CL OF
FIXTURE
11 ½”
(292 mm)
CL OF
FIXTURE
OPERATION
2. As the user enters the beam's
effective range, 15” - 30”
(381 mm to 762 mm), the
beam is reflected into the
Scanner Window to activate
the Output Circuit. Once
activated, the Output Circuit
continues in a "hold" mode for
as long as the user remains
within the effective range of
the sensor.
1. A continuous, invisible light
beam is emitted from the Sloan
ECOS® Sensor.
3. When the user steps away
from the Sloan ECOS®
sensor the sensor initiates
an electrical signal that
operates the solenoid.This
initiates the flushing cycle
to flush the fixture. The
circuit then automatically
resets and is ready for the
next user.
VALVE ROUGH-IN
Model 8186
2 ¼”
(57 mm)
11 ½”
(292 mm)
16 ½”
(419 mm)
FINISHED
WALL
¾” I.P.S.
SUPPLY
(DN 20 mm)
CL OF
FIXTURE
4 ¾”
(121 mm)
FINISHED
FLOOR
SLOAN VALVE COMPANY • 10 500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
Copyright © 2009 Sloan Valve Company
Printed in the U.S.A.
Made in the U.S.A.
Sloan ECOS® 8186-0.13/0.25/0.5 S.S. — Rev. 0c (12/09)
SECTION 4
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
03#*5–
6/%&3$06/5&34*/,
7*53&064$)*/"
BARRIER FREE
03#*5–6/%&3$06/5&34*/,
r 3PVOEVOEFSNPVOUTJOL
r .BEFGSPNWJUSFPVTDIJOB
r 'SPOUPWFSáPX
r 6OHMB[FESJNGPSVOEFSDPVOUFSNPVOUJOH
r 4VQQMJFEXJUINPVOUJOHLJU"
BOEUFNQMBUF
P 4JOLMFTTGBVDFUEFDL
/PNJOBM%JNFOTJPOT
NNEJB
3PVOE
#PXMTJ[FT
NN
XJEF
NN
EFFQ
2" (51mm)
MINIMUM
76mm
(3)
FINISHED WALL
OR SPLASHBACK
1-1/4" DIA. C.H.
(TYPICAL)
610mm
(24)
2-1/2" (64mm)
$PNQMJBODF$FSUJàDBUJPOT
.FFUTPS&YDFFETUIF
'PMMPXJOH4QFDJàDBUJPOT
r"4.&".GPS
7JUSFPVT$IJOB'JYUVSFT
r$"/$4"#TFSJFT
EDGE OF
COUNTERTOP
CUTOUT
7-5/8"
(194mm)
CUTOUT
AREA
203mm
(8)
MIN.
15-1/2"
(394mm)
864mm
(34)
45o
1-3/4" DIA.
STD. DRAIN
OUTLET
686mm
(27)
MIN.
MTG CLIP
(4 PLACES)
BIG BLUE BUS TENANT IMPROVEMENT
PROJECT
SANTA MONICA, CALIFORNIA
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
152mm
(6)
MAX.
15-1/2"
(394mm)
COUNTERTOP
(BY OTHERS)
5/8"
(16mm)
SEALING
COMPOUND
BARRIER FREE
CLEARANCE
229mm
(9)
MIN.
6"
(152mm)
*10-3/4"
(273mm)
*12-7/8"
(327mm)
DETAIL OF MOUNTING CLIP
(KIT No.47194.0070A)
31"
(787mm)
SUGGESTED
SUPPLIES
AS REQ'D
8"
(203mm)
BRASS
INSERT
34"
(864mm)
1-1/4" O.D. WASTE
19mm
(3/4) MIN.
LAVA
1-1/4" O.D. TAILPIECE
FINISHED FLOOR
CLIP
MACH.
SCREW
5P#F4QFDJàFE
P$PMPSP8IJUFP#POFP-JOFO
P4JMWFSP'BXO#FJHFP#MBDL
P 'BVDFU
P 'BVDFU'JOJTI
P 4VQQMJFT
P 5SBQ
4FFGBVDFUTFDUJPOGPSBEEJUJPOBMNPEFMTBWBJMBCMF
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 ACCESSIBLE AND
USABLE BUILDINGS AND FACILITIES CHECK LOCAL CODES.
Countertop 864mm (34") from finished floor. Lavatory
installed 51mm (2") MIN. from front edge of countertop.
Countertop thickness to be 25mm (1") maximum.
A
B
27mm(1-1/16)
102mm(4)
SPREAD
32mm(1-1/4)
203mm(8)
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
/05&4
%*.&/4*0/44)08/'03-0$"5*0/0'4611-*&4"/%i153"1"3&
46((&45&%
U6/%&3$06/5&3.06/5*/(,*54611-*&%8*5)4*/,
'*55*/(4/05*/$-6%&%8*5)'*9563&"/%.645#&03%&3&%
4&1"3"5&-:
64&&/$-04&%5&.1-"5&'03$06/5&3501$65065
4&"-*/($0.106/%4611-*&%#:05)&34
*.1035"/5%JNFOTJPOTPGàYUVSFTBSFOPNJOBMBOENBZWBSZXJUIJOUIFSBOHF
PGUPMFSBODFTFTUBCMJTIFECZ"/4*4UBOEBSE"5IFTFNFBTVSFNFOUT
BSFTVCKFDUUPDIBOHFPSDBODFMMBUJPO/PSFTQPOTJCJMJUZJTBTTVNFEGPSVTFPG
TVQFSTFEFEPSWPJEFEQBHFT
+
¥"4"NFSJDB*OD
FITTING
CENTER-SET
3FWJTFE
Battery Powered Hand Washing Faucet
EBF-650
Description
Battery Powered, Sensor Activated, Chrome Plated Brass, 4” Centerset Electronic Hand Washing
Faucet for tempered or hot/cold water operation.
Flow Rate
0.5 gpm/1.9 Lpm Vandal Resistant Spray Head
(See Accessories for other Spray Head options)
Specifications
ADA Compliant, Battery Powered, Sensor Activated, Chrome Plated Cast Brass, 4” Centerset Hand
Washing Faucet with the following features:
• Splash-proof Circuit Control Module
• Sensor Range Adjustment Screw
• Low Battery LED Indicator Light
• User friendly Variable Time Out Settings
• Serviceable Filtered Solenoid Valve
• Bak-Chek® Tee for Hot/Cold Supply
• Vandal Resistant Spray Head with Pressure Compensating Flow Control
• Metal Jacketed Wire Protection for Sensor lead
• Includes four (4) AA-size Alkaline Batteries
• Appropriate Mounting Hardware included
• Optional 6 VDC Plug-in Transformer available (Batteries act as backup when using optional
transformer)
Variations
(Add suffix to Model Number for inclusion with Faucet)
• Trim Plate (optional)
-8
Trim Plate for 8” Centerset Sink
• Temperature Mixing Valves (optional)
BDM
BDT
Below Deck Mechanical Mixing Valve
Below Deck Thermostatic Mixing Valve
Bak-Chek® Tee not required or provided when a Temperature Mixing Valve is included with the
faucet.
Consult Factory for Finish Variations
Accessories (Specify separately)
• Vandal Resistant Spray Heads
ETF-1029-A
ETF-1024-A
ETF-460-A
SFP-6
Automatic
The Sloan OPTIMA Plus® EBF-650 Battery Powered Hand Washing
Faucet operates by means of an infrared sensor. Once the user’s hands
enter the sensor’s effective range, the Solenoid activates the water flow.
Tempered water flows from the Faucet until hands are moved away.
The Faucet then automatically shuts off.
Hygienic
The ultimate in sanitary protection — there are no handles to turn or
buttons to push. Helps to control the spread of infectious diseases.
Ideal for high traffic commercial installations.
Economical
Automatic operation provides water usage savings over other faucet
devices. Reduces maintenance and operation costs. The 4” Centerset
design makes the EBF-650 Faucet secure against abuse and
vandalism. Battery operation ideal for Retrofit installations. Optional
plug-in transformer available.
2.2 gpm/8.3 Lpm Laminar Flow Spray Head
(recommended for medical applications)
2.2 gpm/8.3 Lpm Aerator
Warranty
Chrome Plated Brass Grid Strainer w/1¼” Outlet Tube
Compliant to: ASME A112.18.1
• Grid Strainer
• Transformer
ADA Compliant
3 year (limited)
120 VAC/6 VDC Plug-in Transformer
See OPTIMA Accessories Section of the Sloan Catalog for a complete listing of OPTIMA Faucet
Accessories and Variations.
BIG BLUE BUS
IMPROVEMENTapproval
PROJECT
This TENANT
space for Architect/Engineer
SANTA MONICA, CALIFORNIA
Job Name
Date
Model Specified
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
Optima Plus EBF-650 S.S. — Rev. 1d (04/10)
The information contained in this document is subject to change without notice.
EBF-650
FAUCET DIMENSIONS
Description
Battery Powered, Sensor Activated, Chrome Plated Brass, 4” Centerset Electronic Hand
Washing Faucet for tempered or hot/cold water operation.
Flow Rate
0.5 gpm/1.9 Lpm Vandal Resistant Spray Head
(See Accessories for other Spray Head options)
ELECTRICAL SPECIFICATIONS
Control Circuit
6 VDC — operates on four (4) alkaline
AA-size batteries.
Optional 6 VDC plug-in Transformer.
Battery Life
2 years at 8,000 cycles/month
Indicator Lights
Range Adjustment/Low Battery
Solenoid Valve
Filtered Solenoid Valve with serviceable
Strainer Filter
Optima® Sensor Range
Factory Set: 4” - 5”
(102 mm - 127 mm)
Adjustable: 2” - 7”
(51 mm - 178 mm)
Max. Distance Control Module may be Installed from Spout
With Standard Cable: 15” (381 mm)
Time Out Adjustment Settings
30 seconds — The Faucet Time Out
Setting determines the maximum time the
faucet will run upon continuous detection.
The EBF-650 is factory set at the 30
second time out. Consult factory for time
out settings to meet individual application
requirements.
OPERATION
1. A continuous invisible beam
of light is emitted from the
OPTIMA® Sensor located at
the base of the lavatory
faucet.
2. As the user’s hands enter the
beam’s effective range, the
beam is reflected back into the
Sensor Receiver and activates
the Solenoid Valve allowing
tempered water to flow from
the faucet. Water will flow until
the hands are removed or until
the faucet reaches its
automatic time out limit
setting.
EBF-650 Faucet with Bak-Chek® Tee
for Hot and Cold Water Supply
3. When hands are moved away
from the OPTIMA® Sensor,
the loss of reflected light
initiates an electrical signal
that deactivates the Solenoid
Valve, shutting off the water
flow. The Circuit then
automatically resets and is
ready for the next user.
EBF-650 Faucet with BDM and BDT Variation Mixing Valves
for Hot and Cold Water Supply
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
Copyright © 2010 Sloan Valve Company
Optima Plus EBF-650 S.S. — Rev. 1d (04/10)
Soft ADA-Compliant Under Lav
Piping Covers
Cut-To-Fit Design Eliminates
Additional Extension
Parts & Tape!
PVC
PVC Insulated
Insulated
Material
Material Maximizes
Maximizes
Protection
Protection While
While
Meeting
ADA
Meeting ADA &
&
UPC
Standards
UPC Standards
25 Flame/450
Smoke
Index*
Protect
Wheelchair
Users from
Possible Burns
& Abrasions
• Durable FusionWelded Seams
• 1/8" Pliable PVC
Shell Finish
Compliments
Fixtures
• Anti-Microbial,
UV-Inhibited,
Anti-Fungal
• Fits Schedule 40
Traps & Flexible
Braided Supplies
Fast-Install Hook & Loop
Fastening
* Base material tested in
accordance with Testing
Standard ASTM E 84-07 with
a 25 flame spread/450 smoke
index (not for Plenum use).
TM
Code Compliance
Minimizes Risk
Complies with Americans with Disabilities Act (ADA)
Laws & UPC Standards
ADA 4.19.4, ICC/ANSI A117.1 (sec. 606.6). Protects wheelchair users from cuts,
burns and abrasions.
Soft-Guard PLUS
Installation Instructions:
Soft-Guard PLUS Fits the Following P-Trap Sizes:
1. Measure and trim Soft-Guard
PLUS with scissors to size
needed
1-1/4" Tubular/Cast Brass
1-1/2" Tubular/Cast Brass
2. Place Soft-Guard PLUS cover
over P-Trap or Valve & Supply
1-1/2" Tubular Plastic with Wing Nuts
1-1/2" Schedule 40 Plastic with Swivel Nuts
3. Secure in position by joining
internal Hook & Loop
fastening system
Available Soft-Guard PLUS Products:
4. For improved tamper
resistance and tighter
custom fit, insert snap-to-lock
fasteners through pre-drilled
holes and press together
to lock
Case
Item #
Description
UPC
Qty
_______________________________________________________________
82521
25/450 Soft-Guard Plus Water Valve cover
10
012181825211
82522
25/450 Soft-Guard Plus P-Trap cover
10
012181825228
82523
25/450 Soft-Guard Plus Offset cover
10
012181825235
82524
25/450 Soft-Guard Plus P-Trap & 1 valve covers
10
012181825242
82525
25/450 Soft-Guard Plus P-Trap & 2 valve covers
10
012181825259
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
_______________________________________________________________
PVC Base Insulation Material Complies with 25 Flame
Spread/450 Smoke Index*
500 Distribution Parkway
Collierville, TN 38017
Customer Service: 800-888-8312
Fax: 901-853-5008
website: www.ipscorp.com
Accessibility Requirements: ADA 4.19.4, (ADA/ABA 606.5 rev.) and ICC/ANSI
A117.1, (sec.606.6).
Specification: Insulate all drainage piping including hot and cold water valve and
supplies under lavatories to meet ADA (Americans with
Disabilities Act) and UPC (International Building Code).
* Base material tested in accordance with Testing Standard ASTM E 84-07
with a 25 flame spread/450 smoke index (not for Plenum use).
UP
C
SECTION 5
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
HYDAPIPE
®
Flat Wall Mounted Shower System
1-912RS-FSB:
1-912-FSB:
Through wall piping configuration with soap dish
Through wall piping configuration less soap dish
Pressure Balancing mixing valve with screw driver service stops and adjustable stop screw to limit handle turn. Fre-Flo, all brass, vandal resistant
head with ball joint on institutional type head bracket. Levertrol lever
diverter with volume control. Wall/hand shower with flexible 5’ metal hose
with in-line vacuum breaker, wall connection and flange. 30” slide bar for
hand shower mounting. Recessed soap dish. Stainless steel covering to be
16 gauge with #4 brush finish.
Modifications:
Valve:
Suffix
Suffix
Suffix
Suffix
21:
Single supply, manual shut off, 4 arm handle
22:
60:
Single supply, manual shut off, lever handle
Single supply, metering shut off (not ADA compliant)
56:
Pressure Balance and metering combination
Shower head:
Suffix 270: Fre-Flo, all brass, ball joint, adjustable spray with volume
control
Suffix 131: Super, ball joint, adjustable spray head
Suffix 121: Super, ball joint, adjustable spray head with volume control
Suffix 285: Fre-Flo, all brass, fixed spray (no ball joint)
Suffix OWBJ: One way ball joint
Suffix DSH: Additional shower head in lieu of hand spray unit
Soap dish:
Suffix CWM: Wall mounted cake soap dish
SYMMONS PRODUCTS MEET
ANSI A112.18.1M, EPA ‘92
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
Job/Location
BIG BLUE BUS TENANT IMPROVEMENT
........................
PROJECT
SANTA MONICA, CALIFORNIA
..
..........................
Hand spray accessories:
Suffix FS:
Hand spray, hose and wall hook (in lieu of Suffix FSB)
Suffix QD: Quick disconnect for hand spray units
Suffix R:
White vinyl hose in lieu of metal hose
Engineer
Seat and Grab bars*:
Suffix HC1: Slat seat and two wall grab bar (right hand)
Suffix HC2: Slat seat and two wall grab bar (left hand)
Suffix HC3: Padded seat and two wall grab bar (right hand)
Suffix HC4: Padded seat and two wall grab bar (left hand)
Contractor
*ADA requirements state that the seat shall be located opposite the controls.
This will require the construction of a partial wall, or use of a reinforced partition
for mounting the folding seat. Construction of a partial wall or reinforced partition
to be provided by others.
For ADA compliance (Americans with
Disabilities Act) consult ADAAG or your
state regulations for proper product choice
and mounting locations.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 961-9621, (781) 843-3849
Website: www.symmons.com ■ Email: c u s t omerservi [email protected] symmons.com
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A.
■
043008
..........................
..........................
..........................
..........................
SMITH ® JAY R.
LOCATION
SMITH MFG. CO.
nt
GI
G
N
ve
e
MEMBER OF:
Pr
®
E
CUSTOMER
DRIVEN
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
NITARY
SA
®
ASPE
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
N E E RI N C
e
DIVISION OF SMITH INDUSTRIES, INC.
ur
M
®
io n
an
R at h e r T h
NONE
5-17-85
SCALE:
DATE:
TD
APPROVED BY:
FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected.
The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are
finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished
floor level.
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
A
S2005
WITH ADJUSTABLE STRAINER HEADS
9 (230) DIA
Low
Position
High
Position
B DIA or SQ
X-MIN
MAX
XX-MIN
MAX
9 (230) DIA
Low
Position
TD
CHECKED BY:
2005
PJ
DRAWN BY:
FIGURE
NUMBER
High
Position
B DIA or SQ
X-MIN
MAX
XX-MIN
MAX
T 2 5/8"(67)
1 1/4 (32)
4(100)
1 1/4 (32)
Seepage
Openings
A
Trap Primer
Connection
(When Specified)
4(100)
Trap Primer
Connection
(When Specified)
A
**6 3/4 (170)
Seepage
Openings
**6 3/4 (170)
A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150)
SPEEDI-SET OUTLET
NO-HUB OUTLET
✔ Fig. 2005Y……(A) ROUND TOP
Fig. 2005Y.……(B) SQUARE TOP
Fig. 2005L……(A) ROUND TOP
Fig. 2005L……(B) SQUARE TOP
Nickel Bronze
Strainer Head
S 02(50) 05(125) DIA or SQ
S 03(75) 06(150) DIA or SQ
S 04(100) 08(205) DIA or SQ
Outlet
Size
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
SIZE
DRAWING NUMBER
FLOOR OR SHOWER DRAINS
✔
TThis dimension to internal stop of speedi-set gasket.
Strainer
Size
B
DIA or SQ
05 (125)
06 (150)
07 (180)
08 (205)
•09 (230)
•10 (255)
*Collar
In High
Position
X
MIN
MAX
1 1/4(32)
1 1/4(32)
1 1/4(32)
1 1/2(38)
1 1/2(38)
1 1/2(38)
*Collar
Free Area
In Low
SQ IN
Position
(SQ CM)
XX
MIN
MAX ROUND SQUARE
2 1/4(57) 3/4(19)
2 1/4(57) 3/4(19)
2 1/4(57) 7/8(22)
2 1/2(64) 1(25)
2 3/8(60) 1(25)
2 3/8(60) 1(25)
1 5/8(41)
1 5/8(41)
1 7/8(48)
1 7/8(48)
1 7/8(48)
1 7/8(48)
7(45)
9(58)
14(90)
17(110)
18(116)
23(48)
6.5(42)
12.5(81)
11(71)
14(90)
16(103)
16(103)
• Add 3/8"(10) to all min/max dimensions for round strainers.
* Collar is reversible to obtain extreme high and low strainer
positions.
•• Not available for 5"(125) size strainer.
** MIN 6 3/4"(170) hole required for core drilled application.
REGULARLY FURNISHED:
VARIATIONS:
OPTIONAL MATERIALS:
Duco Cast Iron Body with Flashing
Collar and Adjustable Strainer Head
as Indicated by Suffix Letter Selected.
Flapper Type Backwater Valve -V
Hinged Grate -H
L Speedi-Set Service Weight
2(50), 3(75) & 4"(100) only
LXH Speedi-Set Extra Heavy
2(50), 3(75) & 4"(100) only
Sediment Bucket -B
Trap Primer Connection -P050
1/2" (13) & -P075 3/4" (19)
Vandal Proof Screws -U
Wide Flanged Strainer (Specify
Fig. DX2005)
T Threaded Outlet
Bronze Body -BB
Chrome Plated Strainer -CP
Galvanized Cast Iron Body -G
Nickel Bronze Strainer -NB
Polished Bronze Strainer -PB
Stainless Steel (Specify Fig. 9700-A)
NOTE: Dimensions shown in
parentheses are in millimeters.
S Meets ASME Standard A112.6.3-2001
02(50), 03(75) or 04"(100) sizes only.
M
L
K
J
10/24/06
9/22/06
05/10/05
04/10/03
REV.
DATE
NO-HUB to SPEEDI-SET
Revised ANSI Note
Revised ANSI Note
Added 6" to Pipe Size
DESCRIPTION
••
RN
RN
JJ
JJ
CL
CL
AM
CL
BY
CKD.
WEIGHT
POUNDS
SEE PM0457 FOR
OPTIONAL STRAINER HEADS.
VOLUME
CUBIC FEET
FIGURE NUMBER
2005
SECTION 6
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
SUBMITTAL
SL-ADA - SERIES - A - 18 GA.
GENEROUS CAPACITY - LEDGE TYPE
SINGLE COMPARTMENT
STYLIST GROUP
ADA COMPLIANT
DATA
SPECIFICATION
Seamless die-drawn construction of type 304, 18-8 stainless steel. Interior
and top surfaces polished to a non-porous Hand-Blended Just Finish
with highlighted bowl rim. Fully coated underside insulates for sound, and
reduces condensation. Straight-sided compartment with 1 3/4" radius corners provides greater capacity. Self-rimming top mount Grip-Rim Plus with
300 series stainless steel mounting channels. Conforms to ASME/ANSI
A112.19.3M. Drain punch #35 centered for Just J-ADA-35 unless otherwise specified.
To be specified :
„ Faucet hole punching:
‰
(1) Hole Centered
‰
(2) Holes on 4" centers
‰
(3) Holes on 4" centers(illustrated)
‰
Alternate Punching:
Faucet Model:
Punching required:
DRAIN LOCATION MUST BE SPECIFIED(Circle one):
‰CENTER REAR
(SHOWN)
‰LEFT REAR
‰RIGHT REAR
‰CENTER
LOCATION MUST BE A MINIMUM OF 4 1/2"FROM THE BOWL WALL.
#35 DRAIN OPENING
JUST MFG. COMPANY CONTINUES TO MAKE QUALITY AND FUNCTIONALITY A
MARK OF THE JUST PRODUCT LINE. TO DO SO REQUIRES THAT WE RESERVE
THE RIGHT TO CHANGE PRODUCT INFORMATION WITHOUT NOTICE. FOR THE
MOST CURRENT AND ACCURATE INFORMATION REGARDING THE COMPLETE
LINE OF JUST SINKS, FAUCETS AND DRAINS, CLICK ON THE SPEC LINE DRAWINGS LINK ON OUR WEB SITE AT www.justmfg.com
MODEL NO.
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
Job Name
SANTA
MONICA, CALIFORNIA
Customer
Architect/Engineer
APPROVED FOR MANUFACTURING
MODEL NO.
QTY.
A
B
C
D
E
F
G
CUTOUT*
SL-ADA-2017-A-GR
20 17 14 14 4-1/2
2
4-1/2 to 6-1/2 19-1/4 x 16 -1/4
SL-ADA-2019-A-GR
20 19 14 16 4-1/2
2
4-1/2 to 6-1/2
19-1/4 x 18-1/4
SL-ADA-2117-A-GR
21 17 16 14 3-1/2 1-3/4 4-1/2 to 6-1/2
20-1/4 x 16-1/4
SL-ADA-2119-A-GR
21 19 16 16 3-1/2 1-3/4 4-1/2 to 6-1/2
20-1/4 x 18-1/4
SL-ADA-2122-A-GR
21 22 16 19 3-1/2 1-3/4 4-1/2 to 6-1/2
20-1/4 x 21-1/4
SL-ADA-2217-A-GR
22 17 16 14 4-1/2
21-1/4 x 16-1/4
2
4-1/2 to 6-1/2
* Cutout dimensions shown (Front-to-Back) x (Left-to-Right) - Corners of cutout may be square or up
to 1/2" radius.
REVISED-5/2004
COMPANY
TITLE
SIGNATURE
DATE
JUST MANUFACTURING COMPANY
.
.
.
.
9233 KING STREET FRANKLIN PARK ILLINOIS 60131-2111
PH: 847-678-5150
FAX: 847-678-6817
E-MAIL: [email protected]
www.justmfg.com
.
3-19
)&3*5"(&
580)"/%-&501.06/5,*5$)&/'"6$&5
8*5)#3"44(004&/&$,41065
MODEL NUMBER:
S-1
6274.000 Top-Mount Kitchen Faucet
Gooseneck swivel spout. Color-matched side spray.
Less handles.
S-2
6275.000 Top-Mount Kitchen Faucet
Gooseneck swivel spout. Less spray. Less handles.
Handles must be ordered separately.
6274.000 Shown
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
311mm
(12-1/4)
229mm
(9)
159mm
(6-1/4)
35mm to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE (4 PLACES)
FOR GROUND JOINT
OR 1-1/2" O.D. SLIP
CONNECTION
121mm
(4-3/4)
51mm
(2)
21mm
(13/16)
25mm
(1)MAX.
25mm
(1)
51mm
(2)MAX.
203mm
(8)
SPRAY FOR
4 HOLE SINK
254mm
(10)
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Durable cast brass construction. Amarilis 1/4 turn
washerless ceramic disc valve cartridges - reversible for use
with either lever or round handles. One-half inch male inlet
shanks with brass coupling nuts. Brass gooseneck swivel
spout. Brass escutcheon plate (escutcheon size 10"L x
2-1/8"W). 2.2gpm/8.3L/min. maximum flow rate.
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Wide Selection of Handle Styles: Full range of
interchangeable handle styles.
SUGGESTED SPECIFICATION:
Two handle top-mount kitchen faucet shall feature cast brass construction with all brass inlet shanks and coupling nuts.
Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use with round or lever handles.
Fitting shall be American Standard Model #627_.000.___ and handle kit # 0000.___.___.
-
¥"4"NFSJDB*OD
)&3*5"(&
580)"/%-&501.06/5,*5$)&/'"6$&5
8*5)#3"44(004&/&$,41065
CODES AND STANDARDS
FLOW RATE*
3.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
2.5
2.0
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Finish
Polished
Chrome
Product
Number
Description
6274.000
Kitchen faucet. Gooseneck swing spout. Color-matched side spray. Less handles.
6275.000
Kitchen faucet. Gooseneck swing spout. Less handspray. Less handles.
002
Handles must be ordered separately.
To order Less Handles - Specify: 4 digit style number followed by three zeros and 3 digit finish number.
Example 6274.000.002 = Kitchen faucet with hand spray in Polished Chrome finish.
The above fittings will accept the following Amarilis-Series handles.
Wrist
Blade
Lever
172H
172V
142H
142V
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
-
¥"4"NFSJDB*OD
Instant Hot Water Dispensers
The Next
Necessity
Model
F-HC1100
™
Our finest line of instant hot water dispensers
for use with our Stainless Steel Tank for filtered
near-boiling 200°F and cool drinking water
Tank and filter sold separately (SST-FLTR)
Submittal Sheet
• Hot & Cool – Dispenses near-boiling 200°F
water and cool drinking water
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
levers provide a dramatic look
• Hot lever automatically shuts off, while
Stay-On™ cool lever remains on for easy use
Specifications
Hot Valve
Instant, self-closing
Cold Valve
Manual return
Shipping Weight
Approximately
4.0 lbs.
Required
Hole Diameter
1 -3/8" - 1 -1/2"
standard sink hole
• Durable all brass faucet construction
• 5-year We Come To You™ In-Home
Service Warranty*
• For use with InSinkErator Stainless Steel
Tank and F-201 Filtration System
• Available in these designer finishes:
white, biscuit, almond, French gold,
satin nickel, polished nickel, chrome,
brushed chrome, mocha bronze, oil rubbed
bronze, matte black and gloss black
Dimensions
5-1/2"
Minimum 4" required
from sink hole center
to backsplash
8-3/8"
11"
Sample Specification
5 1/2"
Cold Side
Water Supply
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4" Incoming
Water Supply
Instant hot water dispenser(s) shall be
InSinkErator Model F-HC1100 with 2/3-gallon
stainless steel tank, adjustable temperature
from 160°F to 210°F and instant, self-closing
hot valve.
Warranty:
5-year parts and in-home service.
8-3/4"
NOTE: Max counter thickness is 3".
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
3-3/4"
6-3/4"
6-1/8"
Job Specifications
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
1-800-558-5700
www.insinkerator.com
HWD299-07B-45-10
Rev. 02/01/2007
Printed in USA
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator is a division of
Emerson Electric Co.
© 2007 InSinkErator
No Lead Remote Chiller
Air Cooled–Stainless Steel Waterways
Model ERS1
®
SPECIFICATIONS
GENERAL
Remote type, electric refrigerated, water chiller unit. Chilling
capacity of 1.5 gallons per hour of 50°F drinking water, based
upon 80°F inlet water and 90°F ambient.
Compact, highly efficient water chiller units are designed for use
with any drinking fountain. Also connects to a bubbler, glass
filler or cold water dispenser. Converts a fountain into a water
cooler. Installs directly under fountain or other application, or
may be located in a service area to serve a remote outlet
(within 15 feet recommended). Also recommended for
photo-processing, medical or experimental laboratories and a
pre-cooler for beverage dispensing.
NO LEAD DESIGN
THIS WATER CHILLER COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986
AND LEAD CONTAMINATION CONTROL ACT OF 1988.
This Elkay Water Chiller is manufactured with a waterway system
utilizing stainless steel components and completely lead-free
materials. These waterways have no lead because all leadcontaining materials, such as leaded brass, have been
removed. All joints are brazed using silver solder only. No lead
solder is permitted. Ideal for use with filter treated water,
domestic water supply or reverse osmosis systems.
This water cooler is certified to NSF/ANSI 61.
CAPACITIES CHART
Model
Number
Base
Rate
*GPH of 50°F Drinking Water
Room Temperature °F
70°F
80°F
90°F
100°F
ERS1
1.5
1.8
1.7
1.5
1.4
ERS1 Remote Chiller
Rated
Watts
Full
Load
Amps
Ship.
Wt.
Lbs.
155
1.7
33
*Based on 80°F inlet water temperature.
Rated watts shown are based on operational (run) time, in compliance with A.R.I.
Standard 1010 conditions. Specific applications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people
served per hour (usage), ambient temperatures, and inlet water temperature.
Multiple outlet capacities. Service to 1 station only.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
1/18 HP, 115VAC, 60Hz single phase. Sealed in lifetime oil supply.
Power: Rated 1.8 Amps; 140 Watts.
Condenser: Fan cooled, copper tube with aluminum fins. Fan
motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Evaporator cooling
coil of continuous copper tubing. Tank is stainless steel. Tank
volume is 0.7 gallons. All water contact surfaces are stainless
steel. Fully insulated.
Refrigerant Control: Refrigerant HFC-134a is controlled by
accurately calibrated capillary tube for positively trouble-free
operation.
Temperature Control: Enclosed adjustable thermostat is
factory preset. Requires no adjustment other than for altitude
requirements.
CONSTRUCTION
Cabinet: Rust-resistant, galvanized steel.
Drain Plug: This chiller is provided with a plastic drain plug
which incorporates an o-ring seal. This fitting is designed for
potable water applications and should be replaced with a suitable fitting if chiller is used with more aggressive liquids.
5 YEAR LIMITED WARRANTY on the refrigeration system
of the unit. Electrical components and water system are
warranted for 12 months from date of installation. Warranty
pertains to drinking water applications only. Non-drinking water
applications are not covered under warranty. Sample
Certificate available on request.
STANDARDS
Elkay Electric Air Cooled Water Coolers meet the
requirements of NSF/ANSI 61. Unit complies with
A.R.I. Standard 1010.
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
* Patent #4,481,971
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
Elkay
elkayusa.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2006 Elkay
(Rev. 7/06)
13-11H
No Lead Remote Chiller
Air Cooled–Stainless Steel Waterways
Model ERS1
®
ROUGH-IN DIMENSIONS
COLD CONTROL
ADJUSTMENT
2-3/8"
(61mm)
1-1/8"
(28mm)
7"
(179mm)
6-1/4"
(160mm)
1/4" O.D. x 2" (5 CM)
TUBING WATER OUTLET
2-3/8"
(61mm)
3-1/2"
(89mm)
ELECTRICAL
BOX COVER
1/4" O.D. TUBE
COLD WATER
INLET
10"
(252mm)
ELECTRICAL
TOP VIEW
2"
(51mm)
17"
(433mm)
2"
(51mm)
14"
(354mm)
INSULATION
FRONT VIEW
TANK DRAIN
SIDE VIEW
NOTE: A service stop (not included) should be installed at the chiller inlet line.
Elkay
13-11H
(Rev. 7/06)
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2006 Elkay
Food Waste Disposers
Submittal Sheet
This popular model offers the following
features and benefits:
• 1/2 Horsepower Heavy Duty Motor
(Quiet Dura-Drive® Induction Motor)
• 2-Year We Come To You™
In-Home Parts And Labor
Service Warranty
• Rugged Galvanized Steel Construction
(For Disposer Durability)
• Space-Saving Compact Design
Sample Specification
Dimensions
Food Waste Disposer(s) shall be
InSinkErator Badger 5, continuous
feed, with 1/2 H.P. motor, galvanized
steel grinding elements with two
stainless steel 360° swivel lugs.
Self-service wrench.
Dishwasher
Drain
Connection
6"
125/8"
4"
Warranty:
2- Year parts and in-home service.
Specifications
Type of Feed
Continuous
On/Off Control
Wall Switch
Motor
Single Phase
HP
1/2
Volts
120
HZ
60
RPM
1725
Amp. (Avg. Load)
6.9
Time Rating
Intermittent
Lubrication
Permanently
Lubricated Upper &
Lower Bearings
Shipping
Weight (Approx.)
14 lbs. 11 oz.
Unit Finish
Waterborne
Grey Enamel
Overall Height
12-5/8”
Grind Chamber
Capacity
26 oz.
Motor
Protection
Manual Reset
Overload
Average
Water Usage
1/4 Gallon per Person
Per Day
Average
Electrical Usage
1/2 KWH per Month
Drain
Connection
1-1/2” Cushioned
Slip Joint
Dishwasher
Drain Connection
Yes
* The complete InSinkErator warranty is included in the Care & Use
Booklet packed with each unit.
5"
65/16"
* Distance from bottom of sink to center line of disposer outlet.
Add 1/2" when stainless steel sinks are used.
** Length of tailpipe from center line of disposer outlet to end of tailpipe.
NOTE: Plumb waste line to prevent standing water in disposer motor housing.
Job Specifications
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
1-800-558-5700
www.insinkerator.com
H593-07E-64-02
Printed in USA
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right to change or discontinue models.
© 2007 InSinkErator, InSinkErator is a division of
Emerson Electric Co. All Rights Reserved.
SECTION 7
PLUMBING SUBMITTALS
FOR THE
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
VALVES
15 p
02
84
WOODFORD MFG. CO.
The Model 24 and B24 are anti-siphon, vacuum
breaker protected wall faucets designed for use in
mild climate areas. The Model B24 is enclosed in a
flush mounted wall box. Both models are designed to
blend with modern architecture for installation on or
in homes, service stations, churches, motels, drivein restaurants, etc. The Model Y24 is designed to be
used on a stand pipe in the lawn and garden, etc.
Anti-Siphon
Wall Faucets
Model 24/B24/Y24
SPECIFICATIONS:
VACUUM BREAKER - ANTI-SIPHON:
• NIDEL® Model 34HF with ¾ inch male hose thread
• ASSE Standard 1011 approved
• IAPMO® listed
• Canadian Standards Association
EPDM PACKING: Prevents leaking.
PACKING NUT: Adjustable brass nut with deep stem
guard.
VALVE SEAT: Standard “O” size washer.
HANDLES: Furnished with polycarbonate wheel
handle and loose tee key.
Optional: Metal wheel handle.
MODEL 24
Exterior Finish:
Standard - Chrome (CH)
Optional- Rough Brass (BR) or Polished Chrome (PC)
INLETS: Model 24 as shown below.
Model B24: 24P- ½ or 24P ¾ only.
Model Y24: ¾ “ FPT.
MAX PRESSURE: 125 p.s.i.
MAX TEMPERATURE: 120° F
SHIPPING WEIGHT: (per unit)
MODEL 24 & Y24: 1 lb
MODEL B24: 13 lbs (brass or chrome box)
6 lbs (aluminum box)
WOODFORD MFG. CO.
MODEL B24
Inlet Descriptions
02
84
MODEL 24/B24
P-½ Inlet
½ FPT
P-¾ Inlet
¾ FPT
Exterior Finish:
Standard - Chrome (CH)
Optional- Rough Brass (BR) or Polished Brass (PB)
Other Options: Anodized Aluminum Box (AL)
15 p
MODEL 24 ONLY
CP Inlet
COMBINATION
½ COPPER TUBE
½ MPT
MODEL Y24
C Inlet
COMBINATION
½ COPPER TUBE
¾ COPPER TUBE
©2007 WOODFORD Mfg.
Exterior Finish:
Standard - Chrome (CH)
Optional- Rough Brass (BR) or Polished Chrome (PC)
BIG BLUE BUS TENANT IMPROVEMENT PROJECT
SANTA MONICA, CALIFORNIA
Rev. 2/07 Form No. 24.105
VALVES
MODEL 24 ONLY
MODEL 24/B24/Y24 PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART#
30009
30008
30104
30105
30247
30109
30107
30120
30233
30121
30002
34HF-CH
34HF-BR
RK-STK
B24BX
B24BX-BR
B24BX-PB
B24BX-AL
RK-24
RK-H34
DESCRIPTION
Washer Screw
Washer
Operating Stem
Packing Support Washer
EPDM Packing
Packing Nut - Chrome
Packing Nut - Brass
Wheel Handle - Clear
Wheel Handle - Tan
Handle Screw - Nickel
Handle Screw - Brass
34HF Vacuum Breaker - Chrome
34HF Vacuum Breaker - Brass
Tee Key
Box/Door Assembly - Chrome
Box/Door Assembly - Brass
Box/Door Assembly - Polished Brass
Box/Door Assembly - Anodized Aluminum
Chrome Repair Kit (Includes items 1-8)
Brass Repair Kit (Includes items 1-8)
MODEL B24
Rough-In Dimensions
END OF
THREAD
IN
MODEL 24
Manufactured under one or more of the following patents: U.S. Patents: 3,414,001; 3,543,786; 4,178,956;
4,316,481; D216,790; D216,791; D277,365; D277,366; Canada Patents: 822,458; 852,529; 865,995
For more information contact...
WOODFORD MANUFACTURING COMPANY
2121 Waynoka Road, Colorado Springs, Colorado 80915 • Phone: (800) 621-6032 • Fax: (800) 765-4115
To view our complete product line visit: www.woodfordmfg.com or email: [email protected]
A Division Of WCM Industries, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement