1x2 HDMI Distribution Amplifier Operation Manual CHDMI-2 Introduction Cypress CHDMI-2 is a high performance HDMI distribution amplifier. It allows one HDMI source to connect up to 2 HDMI displays simultaneously. Features 1. Built-in EDID simulator and HDCP keyset allows each output to work independently when connecting to a HDMI display. 2. Splits a HDMI source up to 2 outputs without signal loss. 3. Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable. 4 Supports a wide range of PC and HDTV resolutions-from VGA to UXGA and 480p to 1080p. Maximum resolution bandwidth-165MHz. 5. Can be cascaded up to 3 layers, or more if using high quality cable. 6. Each of the buffered output can run up to 15 [email protected] Operation Controls and Functions Front Panel HDMI INPUT DC 5V SYNC POWER 1 3 2 1. HDMI input: Connects to the HDMI or DVI output of your source equipment such as DVD player or Set-Top-Box. 2. Sync LED: The LED will illuminate when the HDMI source signal is connected to the input and is detected by the unit. 3. Power input: Plug the supplied 5VDC power supply into the unit. The LED will illuminate when connected. Rear Panel HDMI OUTPUT HDMI OUTPUT 1 2 1 1. HDMI output 1/2 : Connects each of these output ports to the HDMI input of a HDMI display. Specifications: - Frequency bandwidth: 1.65Gbps(single link) - Input/Output:1-in/2-out HDMI female port - Power consumption: 6W Max - 5VDC universal power supply - Operating temperature range: 0 ~ 48 C - Operating humidity range: 30 to 80% RH - Dimensions: 102(W) x92(D) x 25(H)mm - Weight: 220g Connection and Installation DVD or Set-Top-Box or PC HDMI DVI to HDMI Cable HDMI Cable HDMI HDMI HDMI INPUT DC 5V SYNC POWER HDMI OUTPUT HDMI OUTPUT 1 2 HDMI HDMI Cable HDMI HDMI to DVI Cable HDMI HDMI display PC Monitor
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021