Manual 12859990

Manual 12859990
20929 Bridge Street, Southfield, MI 48033
4121 Brockton Drive SE, Grand Rapids, MI 49512
6200 Baron Drive, Bridgeport, MI 48722
6910 Treeline Drive, Suite A, Brecksville, OH 44141
Serving the industry since 1927
Phone: (800) 589-6120 - Fax: (248) 354-3710
www.deppmann.com
May 18th 2009 ~ Monday Morning Minutes:
Vented Flash Tank Installation
Flash tanks in steam condensate systems provide a “bubble” in the pipe with enough volume to
allow the higher temperature condensate to flash into lower pressure steam. Once the condensate
flashes into steam we have to remove it from the flash tank.
There are many possible ways to install a flash tank. We represent Cemline Corporation model
FST flash tanks and they have CAD details available for your use to go along with their sizing
program.
If your flash steam is being vented to atmosphere here are installation details for plans and
specifications. Remember to always read the installation manual for important safety
instructions.
If you would like to sign up for the Cemline sizing program just click on the link
www.cemline.com
For DWG drawings of these details, Click Here, fill in your contact information, and press
Submit. Or contact our Customer Service Department.
Thank you for using products sold by
R. L. Deppmann Company in Michigan and Ohio!
Disclaimer: R. L. Deppmann and it’s affiliates can not be held liable for issues caused by use of the information on this page. While the information comes from many
years of experience and can be a valuable tool, it may not take into account special circumstances in your system and we therefore can not take responsibility for actions
that result from this information. Please feel free to contact us if you do have any questions.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement