Eagle EB2 Modular [0501744] [04/2010]

Eagle EB2 Modular [0501744] [04/2010]
OWNER'S MANUAL
EB2 MODULAR
PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice.
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501744
04 / 2010
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original
purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and
workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty
period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly
notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such
notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in
service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the
MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection
by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any
replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER
to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts
found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless
authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or
any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts,
whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any
other legal theory, regardless of whether the loss resulted from any general or particular requirement which
MILLER knew or had reason to know about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories
or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language
shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by
such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the
purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through
changes in design or materials as it may deem desirable without being obligated to incorporate such changes
in products previously sold. This warranty is not intended to cover or include the following items, which are set
forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather,
road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide
reasonable and necessary maintenance, or uses for which the equipment was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps,
fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER
IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
OWNER, USER AND OPERATOR:
We appreciate your choice of our towing and recovery unit for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel that you can make a major contribution to
safety if you, as the equipment owner and operator:
1.Comply with Federal, State, and Local Regulations.
2.Read, Understand, and Follow the Instructions in this Manual.
3.Use Good, Safe Work Practices in a Common Sense Way.
4.Only have Authorized and Trained Personnel performing maintenance on the Towing and Recovery
Unit.
© 2010 MILLER INDUSTRIES TOWING EQUIPMENT INC. All rights reserved. Reproduction or use, without express permission, of editorial or
pictorial content, in any manner, is prohibited.
i
TABLE OF CONTENTS
It is assumed by the manufacturer that the Owner/Operator has a thorough knowledge of the accepted and lawful
retrieval and towing methods as dictated by his city, county or state. The manufacturer rejects any liability claim that
may result from the incorrect or unlawful application of its equipment.
Section I - PARTS
SUBFRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2 & I-3
BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-4 & I-5
WHEEL LIFT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-6 & I-7
CROSSBAR ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-8 & I-9
BOOM HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-10 & I-11
WHEEL LIFT HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 & I-13
CLAW HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 & I-15
ii
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering any component part of the Eagle EB2 Modular
that may be required when part replacement is necessary. Be certain to use only original equipment replacement
parts for warranty purposes as well as for keeping your unit in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following information to the manufacturer's Parts
Department.
1.
Manual Number & Date of Publication
2.
Manual Page Number
3.
Page Title
4.
Reference Number of Part Desired
5.
Part Number
6.
Part Description
7.
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner
without delay. Should additional information be required for repair or replacement of certain components, contact
your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may
change the specifications, models and feature availability.
I-1
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
PART NUMBER
0301671
0301895
0303385
0306680
0307383
0307576
0307712
0400059
0400066
0400070
0400078
0400122
0400132
0400146
0400150
0400177
0400237
0400367
0400382
0400392
0400408
0400451
0400452
0400480
0400482
0400484
0400492
0400498
0712380
0719519
0719520
0723146
0806834
0807183
0807232
0807707
0910008
9043973
9056150
805040011
810030005
810032000
BA0259
HD1447
DESCRIPTION
TOW SOCKET
GREASE FITTING, 1/8 NPT STRAIGHT
JUNCTION BOX
RUBBER "T" MOUNTS
CHAIN ASSEMBLY, 5/16" G7 X 12'
LIFT CYLINDER
VALVE 5-SPOOL PARKER DIR. CONTROL
1/4-20 X 5/8 HHCS GR 5 ZP
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 X 1 HHCS GR5 ZP
1/4-20 X 2 HHCS GR5 ZP
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
3/8-16 X 2-1/4 HHCS GR.5 ZP
3/8-16 X 2-1/2 HHCS GR5 ZP
1/2-13 X 1 1/4 HHCS GR. 5, ZP
1/2-13 X 4 HHCS GR 5 ZP
1/4-20 NYLOCK HEX NUT ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
3/8 X 1-3/4 X 1/8 THICK FLAT WASHER ZP
1/2 FLAT WASHER ZP
WASHER, 1/2' ID X 2" OD X .150
"D" RING
SHIM - BOOM PIVOT ( .0747 THICK )
SHIM- BOOM PIVOT (.1196 THK)
D.C.V. REAR PANEL
EXPRESS SUBFRAME WELDMENT
BOOM PIVOT PIN WELDMENT
FRONT BODY MTG.TUBE WELD'T
PIN WELDMENT
HYDRAULIC TANK ASSEMBLY SCREW, 5/16"-16 X 1-1/2" FL HD SKT
RETAINING RING, 1-1/2"
VERTICAL BOOM GUIDE
BODY REAR MTG. PLATE- (T MTG.)
D.C.V. FRONT PANEL WELD'T
PIN, 'D' RING
1/4 - 20 WING NUT ZP
I-3
QTY
1
2
1
6
1
1
1
2
2
6
2
5
1
2
2
4
4
10
8
10
8
12
6
14
1
4
4
8
2
2
2
1
1
1
2
1
1
8
1
2
2
1
2
4
Section I - PARTS (cont'd)
BODY ASSEMBLY
I-4
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
BODY ASSEMBLY
PART NUMBER
0301741
0303120
0303126
0303127
0303942
0303943
0306682
0306683
0306684
0306685
0400070
0400109
0400126
0400351
0400381
0400382
0400392
0400452
0400463
0400480
9025049
9032053
804500001
805040005
810010001
810010006
810017006
810030015
810030016
810031100
810037015
810038100
810150000
810157000
945400518
945400800
AWS-7015-A
DESCRIPTION
QTY
MARKER LAMP, RED 2-1/2" ROUND
PADDLE LATCH W/GASKET
LIGHT, MARKER AMBER
GROMMET, MARKER LIGHT
MUDFLAP
MUDFLAP
TAIL LIGHT / RED/TAIL/MARK/CLEARANCE
TAIL LIGHT / STOP-TURN
LIGHT, BACKUP
GROMMET, LED LIGHT 45 STT
1/4-20 X 1 HHCS GR5 ZP
5/16-18 X 1 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
#8-32 HEX NUT W/ STAR WASHER, ZP
5/16-18 HEX NUT ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/4 HELICAL LOCK WASHER ZP
5/16 FLAT WASHER ZP
3/8 FLAT WASHER ZP
INTERIOR COMPARTMENT LIGHT W/ SWITCH
GROMMET
MUD FLAP BACK-UP STRIP
COVER PLATE- BOOM END
BRACKET-MUD FLAP
PANEL- LH REAR SLOPE
PANEL- RH REAR SLOPE
PANEL - LT LIGHT COVER
PLATE - GUARD FILLER (SS)
LH INSIDE SKIRT WELD'T
S.S. PANEL- RH LIGHT COVER
RH INSIDE SKIRT WELD'T
LT BOX WELDMENT - 810
RH BOX WELDMENT - 810
WASHER PLATE
STRIKER PIN WELD'T
REAR REMOTE COVER
1
2
1
2
1
1
2
2
2
6
14
11
7
8
2
4
7
14
16
14
1
1
2
2
2
1
1
1
2
1
1
1
1
1
2
2
2
I-5
Section I - PARTS (cont'd)
RECOVERY BOOM & WHEEL LIFT BOOM ASSEMBLY
I-6
Section I - PARTS (cont'd)
RECOVERY BOOM & WHEEL LIFT BOOM ASSEMBLY
ITEM
PART NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
3012-794003
0300113
0306748
0307097
0307579
0307590
0307817
0400121
0400122
0400132
0400196
0400416
0400480
0400482
0400491
0400497
0400522
0703640
0706668
0718847
0806846
0806941
0807004
0807005
0908627
9041403
9055275
9056098
805180000
880401500
930150004
AWS-6110-A
E801021
DESCRIPTION
BAR - SPACER
GREASE FITTING, 1/4-28 STRAIGHT
BUSHING
HYDRAULIC MOTOR, PARKER
WINCH ASSEMBLY, HY-246 NARROW DRUM
PLUG, LDPE BLACK SQR-17-1014
PAD- NYLATRON
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
SCREW, 1/2"-13 X 1-1/4" SKT HD
1/2-13 NYLOCK HEX NUT GR.8, ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER GR.8,YZ PLATED
1 1/16 X 2 X 1/8 HARDENED FL WASHER ZP
THRUST WASHER
SHIM, WINCH MOUNTING
PIN- EXTEND CYLINDER
WINCH BUCKET WELDMENT
OUTER BOOM WELDMENT - EB-2
OUTER W/L BOOM WELD'T (EB2)
INNER W/L BOOM WELD'T (EB2)
WINCH FREE-SPOOL ASSY
1/2-13 X 1-1/2 HHCS GR 8 ZP
SNAP RING, 2-3/4" EXTERNAL
SNAP RING, 1"
SHEAVE HOUSING ASSEMBLY
PIN BOOM LIFT CYLINDER UPPER
BOTTOM PAD
HYD CYLINDER, BOOM EXTEND
PIVOT PIN, BOOM STINGER
I-7
QTY
1
5
1
1
1
1
2
2
6
1
2
14
3
8
2
28
2
2
2
1
1
1
1
1
1
14
1
4
1
1
1
1
2
Section I - PARTS (cont'd)
CROSSBAR ASSEMBLY
I-8
Section I - PARTS (cont'd)
CROSSBAR ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
0300113
0400181
0400579
0701956
0801073
0807006
AWS-1055-A
AWS-1055-B
AWS1011
AWS1012
E300002
E700030
E801002
E801003
E801008
E801020
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
1/2-13 X 1-1/2 HHCS GR 5 ZP
SPRING PIN
SCREW, OUTER CROSSTUBE RETATINING
PIN - PIVOT
CROSSBAR WELD'T (EB2)
TBD
TBD
SPRING CLAW
SPRING TOWBAR - INTERNAL
BEARING - CLAW PIVOT
WASHER-CLAW PIVOT PIN STD
CLAW WELDMENT - LEFT
E801003
STD CLAW PIVOT PIN WELDMENT
EAGLE TIRE ADAPTER
I-9
QTY
2
2
2
4
1
1
4
2
1
2
2
2
1
1
2
2
Section I - PARTS (cont'd)
BOOM HYDRAULICS
I-10
Section I - PARTS (cont'd)
BOOM HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PART NUMBER
0300044
0301522
0301620
0302508
0302510
0302584
0307097
0307460
0307576
0307579
0307712
810770015
AWS-6827-A
AWS-6827-B
AWS-6110-A
DESCRIPTION
CONNECTOR 6MJX8MB
CONNECTOR 6MJ-6MB
FITTING, ELBOW, 6MJ-6MB90
ELBOW, 8MJ-8MB90LL
CONNECTOR, 6MJ-6MBL
HOSE ASSEMBLY, 50" HYDRAULIC MOTOR, PARKER
FITTING, ELBOW, 6MJ-6MB90L
LIFT CYLINDER
WINCH ASSEMBLY, HY-246 NARROW DRUM
VALVE 5-SPOOL PARKER DIR. CONTROL
HOSE ASSEMBLY, 29"
HOSE ASSEMBLY, 180" LG.
HOSE ASSEMBLY - 180" LG
HYD CYLINDER, BOOM EXTEND
I-11
QTY
2
4
2
2
1
2
1
1
1
1
1
2
1
1
1
Section I - PARTS (cont'd)
TANK HYDRAULICS
I-12
Section I - PARTS (cont'd)
TANK HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART NUMBER
0300056
0301391
0301471
0301473
0301522
0301995
0302052
0302757
0303391
0307555
0307712
0310296
0310462
0400118
0400464
0400748
0702540
0807297
9011011
9012839
9018092
9018131
DESCRIPTION
BARB, 16C4-16MP
CONNECTOR, 8MJ-12MP
HOSE ASSEMBLY - 30" LG
HOSE ASSEMBLY, 32"
CONNECTOR 6MJ-6MB
ADAPTER, 8FJ-6MJ STRAIGHT
RUN TEE, 8MJ-8MJ-8FJX
CONNECTOR, 8MJ-12MB
HOSE ASSY - 110"
CONNECTOR 8MJX6MB
VALVE 5-SPOOL PARKER DIR. CONTROL
IMMERSION FILTER ASSEMBLY
MAGNETIC HEX PLUG ~ 3/4 NPT
5/16-18 X 3/4 HHCS GR.5 ZP
5/16 HELICAL LOCK WASHER ZP
SCREW, 5/16"-18 X 1/4" HEX SKT SET
SUCTION HOSE, 12 FT (1" ID)
HYDRAULIC TANK WELDMENT
PIPE PLUG, 1/4" SQ HD
PLUG 1" (HYDRAULIC) HEX HEAD
HOSE CLAMP, HS24 - 1 1/2"
BREATHER CAP
I-13
QTY
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
2
1
1
1
1
1
1
NOTES
NOTES
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement