Milwaukee | 2441-20 | Technical data | Milwaukee 2441-20 Technical data

Milwaukee 2441-20 Technical data
GREGG DISTRIBUTORS LTD.
NEW PRODUCT
SUPPLEMENT CATALOGUE
5
In this issue:
AVMOR LTD. Biomaxx Hand Sanitizer..........................................SP05-2
CONOCOPHILLIPS® Industrial Oils............................................SP05-16
FLEXFAB® Silicone Charge Air Cooler Hose...............................SP05-17
GDX Air Brake System................................................................SP05-18
GDX Gunite Automatic Slack Adjusters.......................................SP05-18
JOMAC General Duty Gloves......................................................SP05-17
MILWAUKEE Corded Power Tools..............................................SP05-15
MILWAUKEE M12 Cordless Power Tools.................SP05-13 to SP05-15
MILWAUKEE M12 Fuel Cordless Power Tools.........SP05-12 to SP05-13
MILWAUKEE M18 Cordless Power Tools.................SP05-11 to SP05-12
MILWAUKEE M18 Fuel Cordless Power Tools.........SP05-10 to SP05-11
MILWAUKEE M28 Cordless Power Tools....................................SP05-10
MITUTOYO Bore & Hole Gauges..................................................SP05-7
MITUTOYO Calipers & Accessories..............................................SP05-8
MITUTOYO Depth & Snap Gauges...............................................SP05-8
MITUTOYO Micrometers & Accessories......................SP05-3 to SP05-5
MITUTOYO Radius Gauges..........................................................SP05-7
MITUTOYO Rulers, Squares, Combo Squares, and Protractors.......SP05-9
MITUTOYO Scribers.....................................................................SP05-9
MITUTOYO Test Indicators & Accessories...................SP05-5 to SP05-6
PROCORE LED Decorative Light Strings.....................................SP05-2
PROCORE Rolling Tool Box..........................................................SP05-2
QUAKER STATE® Motor Oils......................................................SP05-16
SAFEWAY First Aid/Medical Supplies.........................................SP05-17
SKF/CR® Seals............................................................................SP05-18
TRYGG Parts & Accessories.......................................................SP05-17
PROCORE
PCR/3847/3492
Rolling Tool Box
4 PC. ROLLING TOOLBOX
•Interlocking boxes for portability and flexibility with each section being able to be separated or combined
•Top box: large tool box with inside tray, nesting handle and metal side hasps
•2nd box: large single drawer box with ball bearing sliding rails
•3rd box: large two drawer box with ball bearing sliding rails
•4th or bottom box: large front swing tilt drawer box
•Each section has a built-in independently locking hasp •165 lbs (75 kgs) maximum loading capacity
•Retractable handle •4-7/8” (12.5 cm) wheels
Part No. 00-1175.
Dimensions:
Overall - 19¾” x 12½” x 35½”
Top Box Inner - 17⅛” x 8¾” x 5¾”
2nd Box Inner - 15⅜” x 8⅝” x 5⅜”
3rd Box Inner - 15⅜” x 8⅝” x 2⅝” each
Bottom Inner - 16” x 8½” x 10⅝”
Decorative Lights
LED DECORATIVE LIGHT STRINGS
•Indoor/outdoor rated •37 ft./11.3 m string length •150 strawberry C6 LED bulbs at 3” spacing
•Low voltage, cool touch LED’s •Maximum of two strings can be connected together via end-toend coaxial connections •120V, 4 watts per string •CSA 8W, 24V DC adapter included •Green
wire sting •Replaceable bulb
Part No. 22-3420, Multi-colour (Green, Blue, Red, Yellow, and Amber).
Part No. 22-3422, White.
Part No. 22-3424, Red.
Part No. 22-3426, Green.
Part No. 22-3428, Blue.
Part No. 22-3430, Yellow.
Part No. 22-3432, Amber.
AVMOR LTD.
Biomaxx Hand Sanitizer
7T ALCOHOL HAND SANITIZER
•Fragrance free product that produces a thick, stable lather that
leaves skin with a soft, refreshing, non-sticky after-feel •Fast drying
and it effectively kills harmful bacteria and germs on skin •For
personal hand hygiene to help prevent the spread of certain bacteria
•70% ethyl alcohol •Will also fit into Purell® 800 Series Dispenser
Part No. 2195198001, 800 ml bag-in-box refill.
Part No. 0000011770, 800 ml bag-in-box dispenser.
SP05-2
GREGG DISTRIBUTORS LTD.
AVM/1267
MITUTOYO
MIT/2825
Micrometers
OUTSIDE MICROMETERS SERIES 103 - METRIC
•Hammertone, baked-enamel-finished frame •Ratchet Stop for
exact repetitive readings •With a standard bar except for 0-25
mm model •Comes with ratchet stop
Part No.
Range
Accuracy
0 - 25 mm
25 - 50 mm
50 - 75 mm
75 - 100 mm
100 - 125 mm
125 - 150 mm
150 - 175 mm
175 - 200 mm
200 - 225 mm
225 - 250 mm
±2μm
±2μm
±2μm
±3μm
±3μm
±3μm
±4μm
±4μm
±4μm
±5μm
•Hammertone, baked-enamel-finished frame •Ratchet Stop
for exact repetitive readings •With a standard bar except for
0-1”model •Comes with ratchet stop
Mass (g)
175
215
315
375
515
665
720
920
1080
1255
OUTSIDE MICROMETERS SERIES 104
•Wide measuring range
with interchangeable anvils
•Ratchet Stop for constant
force •Supplied with zerosetting standards bar for
each range •Supplied in
fitted wooden case
Technical Data
Accuracy: ±[.00016” +.00004 (L/3)”] L = Max Range (Inch)
Graduation: .001” (104-165: is .0001”)
Flatness: .000024” for models up to 12”
Parallelism: .00008” for models up to 3”
.00012” for models up to 6”
±[.00008” + .00004 (L/4)”] L= Max range (inch)
Measuring faces: Carbide tipped (spindle only)
•Micrometer Set .0001” Graduation Model
Part No. 103-907-40, 6 pc. Micrometer Kit. Includes 0-1”, 1-2”,
2-3”, 3-4”, 4-5”, and 5-6” micrometers.
Part No. 103-908-40, 12 pc. Micrometer kit. Includes 0-1”,
1-2”, 2-3”, 3-4”, 4-5”, 5-6”, 6-7”, 7-8”, 8-9”, 9-10”, 10-11”, and
11-12” micrometers.
Technical Data
Graduation: .001” or .0001”
Flatness: .000024” for models up to 12”
Parallelism: [.00008 + .00004 (L/4)]” L= max range (inch)
Measuring faces: Carbide tipped
Part No.
103-177
103-260* 103-178
103-262* 103-179
103-217*
103-180
103-218*
103-181
103-219*
103-182
103-220*
103-183
103-184
103-185
103-186
103-187
103-188
Range Graduation
Accuracy
Mass (g)
0 - 1”
0 - 1”
1 - 2”
1 - 2” 2 - 3”
2 - 3”
3 - 4”
3 - 4”
4 - 5”
4 - 5”
5 - 6”
5 - 6”
6 - 7”
7 - 8”
8 - 9”
9 - 10”
10 - 11”
11 - 12”
±.0001”
±.0001” ±.0001”
±.0001” ±.0001”
±.0001”
±.00015”
±.00015”
±.00015”
±.00015”
±.00015”
±.00015”
±.0002”
±.0002”
±.0002”
±.00025”
±.00025”
±.00025”
175
175
215
215
315
315
375
375
515
515
665
665
720
920
1080
1255
1405
1565
.001”
.0001” .001”
.0001” .001”
.0001”
.001”
.0001”
.001”
.0001”
.001”
.0001”
.001”
.001”
.001”
.001”
.001”
.001”
*.0001"Reading is obtained with vernier
SPHERICAL FACE MICROMETERS SERIES 115, 295, 395
INTERCHANGEABLE ROD TYPE
DEPTH MICROMETER SERIES 129, 329
•4 mm interchangeable rods, with
lapped measuring end, provide a
wide measuring range •The rod
length can be adjusted in 1” or 25
mm increments •With ratchet stop
for constant force •With measuring
rod clamp •Supplied in fitted
plastic case
129-127
329-350-10
295-215
•Wide range of ID measurements by combining extension rods
(pipes) and anvils with the micrometer head •Supplied in fitted
plastic case
Technical Data
Battery: 357BPZ
Accuracy: Refer to the list of specifications.
Flatness: .000024” / 0.6μm
Part No. Range Micrometer Head
Extension Rods
.5”, 1”, 2” (2 pcs.), 4”,
137-214 2” - 60”
.5”
8” (2 pcs.), 12”
103-908-40
395-371
EXTENSION ROD TYPE TUBULAR
INSIDE MICROMETERS - SERIES 137
Technical Data
Accuracy: ±{.00012+n+(.00004xR/2)}*
R=Maximum
measuring length (inch),
Fraction rounded up
Graduation: 0.01mm or .001”
103-930
•Designed to measure the wall thickness of various tubing
•Ratchet Stop for constant force •Supplied in fitted plastic case
Mass
Come with
Part No. Range Graduation (kg)
104-137
0-6” .001” 1.35 6 anvils & 5 standards
104-138 6-12”
.001” 2.65 6 anvils & 6 standards
Travel of
OUTSIDE MICROMETER KITS SERIES 103
•Micrometer Set .001” Graduation Model
Part No. 103-930, 4 pc. Micrometer Kit. Includes 0-1”, 1-2”,
2-3”, and 3-4” micrometers.
Technical Data
Graduation: 0.01 mm, 0.001 mm
Flatness: 0.6 μm for models up to 300 mm
1μ for models over 300 mm
Parallelism: (2+R/100)μm, R=max, range (mm)
Measuring faces: Carbide tipped
103-137
103-138
103-139-10
103-140-10
103-141-10
103-142-10
103-143-10
103-144-10
103-145-10
103-146-10
OUTSIDE MICROMETERS SERIES 103 - INCH
Part No.
Range
Graduation
Accuracy
Analog
115-253*
0 - 1” .0001” ±.00015”
Mechanical counter model
295-215 0 - 25 mm 0.01 mm
±3μm
295-253* 0 - 1” .0001”
±.00015”
Digital model (IP65 Approved) - Inch/Metric
0 - 1”/
.00005”/
395-371 0 - 25.4 mm 0.001 mm
±.0001”
1”-2”/
.00005”/
395-372 25.4- 50.8 mm 0.001 mm
±.0001”
2” - 3”/
.00005”/
395-373 50.8-76.2 mm 0.001 mm
±.0001”
3” - 4”/
.00005”/
395-374 76.2-101.6 mm 0.001 mm ±.00015”
*.0001"Reading is obtained with vernier
Mass
180
220
220
270
330
Technical Data
Accuracy: ±.00012”/±3μm for micrometer head feed
Resolution*: .00005”/0.001mm or 0.001mm
Graduation: .001” or 0.01mm
Flatness of reference face: .00005” for 2.5”/1.3μm for 63.5 mm width base,
.00008” for 4”/2μm for 101.6 mm width base
Flatness of measuring rod face: 0.3μm
Parallelism between reference face and measuring rod face:
[.00016 + (.00004 x R/2]”
R=max. measuring range (inch)
(4+L/50)μm, L=Max. measuring length (mm)
Measuring rod diameter: .157”/4 mm
Display*: LCD
Battery*: 357BPZ
Battery life*: Approx. 3.5 years under normal use
*Digital model
Part No.
Range
Base Size
Analog Model
129-127
0-4”
2.5” x .63”
129-131
0-4”
4” x .63”
129-128
0-6”
2.5” x .63”
129-132
0-6”
4” x .63”
129-149
0-12”
2.5” x .63”
129-150
0-12”
4” x .63”
Digital Model - Inch/Metric
329-350-10
0-6”/0-152.4 mm
4”x.63” 329-351-10 0-12”/0-304.8 mm
4”x.63” Rod
Quantity
4 rods
4 rods
6 rods
6 rods
12 rods
12 rods
6 rods
12 rods
470
625
www.greggdistributors.ca
SP05-3
MITUTOYO
MIT/2825
Micrometers
INTERCHANGEABLE ROD TYPE
INSIDE MICROMETER - SERIES 141
•Wide range of ID measurements with interchangeable rods
•Each interchangeable rod is marked with its measuring
range •The sizes of interchangeable rods can be adjusted
with spacing collars •Both micrometer head and furnished
rods are satin-chrome finished throughout •Supplied in fitted
plastic case
INSIDE MICROMETERS SERIES 145, 345
•Caliper type jaws are made of high-grade, tool steel •Locking
clamp for positive locking of spindle •Satin-chrome finished
•Supplied in fitted plastic case. Over 175 mm / 4” supplied in
wooden case.
MICROMETERS STANDARDS SERIES 167
•Used for the zero point setting of outside micrometers •Flat
and lapped measuring faces •Heat insulating handle to prevent
expansion due to body temperature •Supplied in fitted carton
345-350-10
145-187
Technical Data
Accuracy: ±{.00024+ (.00004xR/2)}”*
* R=Maximum measuring length (inch)
Fraction rounded up
Graduation: 001”
Travel of
Part No. Range Micrometer Head
141-102
141-208
141-233
141-121
1”-2”
2”-8”
2”-12”
8”-20”
.25”
.5”
.5”
1”
Comes with
2 rods
3 rods
5 rods
3 rods
Technical Data
Resolution*: 0.01 mm or .00005”/0.001 mm
Graduation: 0.01 mm or .001” (Analog model)
Measuring faces: Carbide tipped
Display*: LCD
Battery*: 357BPZ
Battery life*: Approx. 1.2 years under normal use
Part No.
MICROMETERS STANDARD SETS SERIES 167
•Used for the zero point setting of outside micrometers •Flat
and lapped measuring faces •Heat insulating handle to prevent
expansion due to body temperature •Supplied with fitted
carrying case
Part No. 167-902, 5 pc. set, comes with 25, 50, 75, 100, and
125 mm micrometers.
Part No. 167-903, 11 pc. set, comes with 25, 50, 75, 100, 125,
150, 175, 200, 225, 250, and 275 mm micrometers.
Part No. 167-912, 5 pc. set, comes with 1”, 2”, 3”, 4”, and 5”
micrometers.
Part No. 167-913, 11 pc. set, comes with 1”, 2”, 3”, 4”, 5”, 6”,
7”, 8”, 9”, 10”, and 11” micrometers.
Part No.
Range
METRIC
145-185
5-30 mm
145-186
25-50 mm
145-187
50-75 mm
145-188
75-100 mm
145-189
100-125 mm
145-190
125-150 mm
145-191
150-175 mm
145-192
175-200 mm
INCH
145-193
.2 - 1.2” 145-194
1 - 2” 145-195
2 - 3” 145-196
3 - 4” Digital Model - Inch/Metric
345-350-10
.2-1.2”/5-30 mm 345-351-10
1-2”/25-50 mm *Digital model
Accuracy
±5μm
±6μm
±7μm
±8μm
±9μm
±9μm
±10μm
±10μm
±.00025”
±.0003”
±.00035”
±.0004”
METRIC
167-101
167-102
167-103
167-104
167-105
167-106
167-107
167-108
167-109
167-110
167-111
INCH
167-141
167-142
167-143
167-144
167-145
167-146
167-147
167-148
167-149
167-150
167-151
167-152
Length
Diameter
25 mm
50 mm
75 mm
100 mm
125 mm
150 mm
175 mm
200 mm
225 mm
250 mm
275 mm
6.35 mm
6.35 mm
6.35 mm
7.9 mm
7.9 mm
7.9 mm
7.9 mm
9.4 mm
9.4 mm
9.4 mm
9.4 mm
±1.5μm
±2.0μm
±2.5μm
±3μm
±3.5μm
±4μm
±4.5μm
±5.0μm
±5.5μm
±6.0μm
±6.5μm
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
12”
.25”
.25”
.25”
.31”
.31”
.31”
.31”
.37”
.37”
.37”
.37”
.37”
±.000005”
±.0001”
±.0001”
±.0001”
±.00015”
±.00015”
±.00015”
±.00015”
±.0002”
±.0002”
±.0002”
±.00025”
±.00025”
±.0003”
COOLANT PROOF MICROMETER - SERIES 293
•IP65 protection level, enabling use in environments exposed to cutting oil, etc •Auto power ON/
OFF function •Certificate of inspection is included. (2” /50 mm or less range models) •Supplied
in fitted case. Comes with plastic case
QuantuMike COOLANT PROOF
MICROMETER - SERIES 293
•Faster measurement with 2 mm per revolution instead of the
standard 0.5 mm •A patented ratchet thimble mechanism helps
ensure repeatability •A function lock helps prevent error •IP-65
protection level •Certificate of inspection provided •Supplied in
fitted plastic case
Technical Data
Resolution: .00005”/0.001 mm or 0.001 mm (up to 4” models)
.0001” / 0.001 mm (over 4” models)
Flatness: .000012”/0.3μm
Parallelism: .00004”/1μm for models up to 2”/50 mm
.00008”/2μm for models up to 4”/100 mm
.00012”/3μm for models up to 7”/175 mm
Measuring faces: Carbide tipped
Display: LCD
Battery: 357BPZ
Battery life: Approx. 1.2 years under normal use
Dust/Water protection level: IP65
Part No.
Technical Data
Resolution: 0.001mm or .00005”/0.001mm
Flatness: 0.3μm/.000012”
Parallelism: 1μm/.00004” for models up to 50mm/2”
Measuring faces: Carbide tipped
Display: LCD
Battery: 357BPZ
Battery life: Approx. 1.2 years under normal use
Dust/Water protection level: IP65
Part No.
293-185
SP05-4
Range
Resolution
Range
Resolution
293-340-30
0-1”/0-25.4 mm .00005”/0.001 mm
293-341-30 1”-2”/25.4-50.8 mm .00005”/0.001 mm
293-342-30 2”-3”/50.8-76.2 mm .00005”/0.001 mm
293-343-30 3”-4”/76.2-101.6 mm .00005”/0.001 mm
293-350-10* 4”-5”/101.6-127.0 mm .0001”/0.001 mm
293-351-10* 5”-6”/127.0-152.4 mm .0001”/0.001 mm
*With SPC Data Output
Accuracy
0-1”/0 - 25.4 mm .00005”/0.001 mm .00005”
GREGG DISTRIBUTORS LTD.
Accuracy
±.00005”
±.00005”
±.00005”
±.0001”
±.0001”
±.0001”
Accuracy
MITUTOYO
MIT/2824/2825
Micrometers & Accessories
MDC-Lite DIGIMATIC MICROMETER SERIES 293
•Provided only with a zero set and in / mm keys •Friction
thimble for a constant measuring force •Measurement readout
with large characters on the LCD screen •No spindle clamp
•No data output •Supplied in fitted plastic case
MICROMETER STANDS - SERIES 156
DISK MICROMETERS SERIES 123, 323
• Diameter of measuring disk: .787”/ 20 mm •Ratchet Stop for
constant force •Supplied in fitted plastic case
•These stands are designed to allow benchtop use with hand
micrometers or other gauges
Part No. 156-101-10, Adjustable angle type. Up to 4” / 100mm
range.
Part No. 156-106, Fixed angle with platform. 0-1” / 0-25 mm,
1-2” / 25-50 mm range.
323-350
Technical Data
Resolution*: .00005”/0.001 mm or 0.001 mm
Graduation: .001” or 0.01 mm
Flatness: .00004” / 1μm for models up to .00004” /100 mm
.000063” / 1.6μm for models over 4” / 100 mm
Parallelism: .00016” / 4μm for models up to 2”/ 50 mm
Display*: LCD
Battery*: 357BPZ
Battery life*: Approx. 1.2 years under normal use
*Digital model
Technical Data
Resolution: .00005”/0.001mm or 0.001mm
Flatness: .000012” / 0.3μm
Parallelism: .00008” / 2μm
Measuring faces: Carbide tipped
Display: LCD
Battery: 357BPZ
Battery life: Approx. 1.2 years under normal use
Part No.
Range
Part No.
Resolution
Accuracy
293-832-30 0-1”/0-25.4 mm .00005” / 0.001 mm ±.0001”
Range
Graduation
Analog Model
123-101 0-25 mm 123-125
0-1”
Digital Model
0-1”/
323-350 0-25.4 mm 1-2”/
323-351 25.4-50.8 mm 0.01 mm .001” .00005”/
0.001mm .00005”/
0.001mm Accuracy
Mass (g)
±4μm ±.0002” 200
200
±.0002” 290
±.0002” 355
156-101-10
156-106
SPC CABLE WITH DATA SWITCH
•For 293 series micrometers.
Part No. 05CZA662, 40”/1 m.
Part No. 05CZA663, 80”/2 m.
Test Indicators
BACK PLUNGER TYPE DIAL
INDICATORS - SERIES 1
• Back plunger type dial gauges are suitable for mounting onto
leveling machine tool tables or
inspection jigs, and for use in
small spaces where the graduations of standard dial gauges
are difficult to see •Stem
3/8” dia. , #4-48 UNF Thread
•Measuring force: 1.4N or less
•ANSI/AGD type
DIAL INDICATORS SERIES 1
•Stem dia. 3/8” #4-48 UNF
Thread •Measuring force: 1.4N or
less •ANSI/AGD type
Dial
Part No. Range Range Graduation Accuracy
Reading
/ Rev
1410S
.25” .1”
.001” ±.001”
0-100
Dial
Part No. Range Range Graduation Accuracy
Reading
/ Rev
1166T
.2” .05”
.001” ±.001”
0-50
1167T
.2” .05”
.001” ±.001”
0-25-0
DIAL INDICATORS SERIES 2
•Standard Type, Inch Reading
•Stem dia. 3/8” #4-48 UNF Thread
•Measuring force: 1.8N or less
(#24245-19 is 2.5N or less) •ANSI/
AGD type
Part No.
Range Range Graduation Accuracy Dial
Reading
/ Rev
With Lug
2416S
1” .1”
2416S-10*
1” .1”
2424S-19** 2” 1”
Flat-back
2416SB
1” .1”
2416SB-10* 1” .1”
2922SB
.125” .05”
*Jeweled bearing type
**Shockproof/jeweled bearing type
HORIZONTAL TYPE DIAL TEST INDICATORS
- SERIES 513
Accuracy Dial
Reading
±.0005” 0-15-0
±.0005” 0-15-0
±.0005” 0-15-0
±.0005” 0-15-0
±.001”
±.001”
±.001”
0-100
0-100
0-100
.001” .001” .0005” ±.001”
±.001”
±.0005”
0-100
0-100
0-25-0
POCKET TYPE DIAL TEST
INDICATORS - SERIES 513
•Performs easy and accurate measurement of narrow or
recessed areas, plus inside and outside diameters that dial
indicators cannot access •No-clutch structure for automatic
reversal of measuring direction •Resistant to water and dust
thanks to the one-piece bezel and “crystal” design with O-ring
•The glare-free flat crystal face has a scratch-resistant coating
•High-sensitivity and quick-response because of jeweled bearings •A carbide contact point is provided as standard
Part No. Range Contact Graduation
Point
BASIC SET
513-402 .03” 19.9 mm .0005”
513-412 .03” 33.9 mm .0005”
FULL SET
513-402T .03” 19.9 mm .0005”
513-412T .03” 33.9 mm .0005”
.001” .001” .001” •Jeweled bearings assure higher sensitivity and accuracy
•Reversible measuring direction •Two holding bars are
supplied (Full sets only) •Fully adjustable bezel/dial face
•Contact point is adjustable within 220° •Bezel is sealed
with on O-ring to keep out water/oil
Full set shown.
Full set shown.
Part No. Range Contact Graduation Accuracy Dial
Reading
Point
BASIC SET
513-527E 0.8 mm 14.7 mm 0.01 mm
8µm 0-40-0
FULL SET
513-518T .04” 26.5 mm .001”
±.001” 0-20-0
513-527T 0.8 mm 14.7 mm 0.01 mm
8µm 0-40-0
www.greggdistributors.ca
SP05-5
MITUTOYO
MIT/2824/2825
Test Indicators & Accessories
MAGNETIC STANDS SERIES 7
ABS DIGIMATIC INDICATOR SERIES 543
Mitutoyo’s Magnetic Stands accept all dial indicators and dial test indicators. The ON-OFF
switch offers instant mounting and dismounting
without any adverse effect to the indicators or
workpiece surface.
•This indicator uses a button-type
battery (357BPZ), stresses ease of
use, and comes with the minimum of
functionality •These Digimatic indicators
employ Mitutoyo proprietary ABS sensor, which makes it possible to restore
the origin point even if the power is
turned off. This eliminates the need to
perform origin matching each time the
power is turned on. Furthermore, this
sensor ensures that overspeed errors
do not occur, which improves reliability.
•SPC Data output •Uses 357BPZ
battery
Part No.
Range
543-783 .5/12.7 mm
543-783B .5/12.7 mm
Part No.
Resolution Accuracy Back Type
.0005”/
0.01 mm
.0005”/
0.01 mm
±.008”/
0.02 mm
±.008”/
0.02 mm
7010SN 7011SN 7012-10 7014E 7033B Description
7012-10
7010SN
Applicable holding stem dia.
Magnetic stand 6 mm, 8 mm, 9.53 mm (3/8”) Magnetic stand 6 mm, 8 mm, 9.53 mm (3/8”) Magnetic flexi-stand 6 mm, 8 mm, 9.53 mm (3/8”) Mini magnetic stand 6 mm, 8 mm, 9.53 mm (3/8”) Universal magnetic stand 6 mm, 8 mm, 9.53 mm (3/8”) 7014E
Remarks
With fine adjustment
For dial test indicator
Without magnet ON/OFF
With mechanical locking sytem
7033B
With Lug
Flat
MAGNETIC STAND SET - SERIES 7
Stand comes with Magnetic stand (#70105N), dial indicator
(#2416S), and plastic case.
Part No. 7046PCK.
UNIVERSAL HOLDER
UNIVERSAL HOLDER (POCKET
STYLE)
•Allows the indicator to be set at a desired position
Part No. 901916, 8 mm stem, Length: 80 mm.
Part No. 901459, .25” DIA. stem, Length: 3”.
Part No. 901461, 6 mm stem, Length: 80 mm.
•Since the Dial Test Indicator can be swiveled to a desired
angle, the holder is useful for centering workpieces and installing workpieces on a milling machine
Part No. 901917, 8 mm stem, Length: 84 mm.
Part No. 901546, .25” DIA. stem, Length: 84 mm.
Part No. 901547, 6 mm stem, Length: 84 mm.
901916
SPINDLE LIFTING LEVER & CABLE
The Spindle Lifting Lever is attached to the top end of the
spindle for improved inspection efficiency when using a dial
indicator mounted on a stand.
Part No. 21BZA610, Use for Series 1 dial indicators (up 5 mm
/ .25”).
Part No. 902794, Use for Series 2 dial indicators (up to 10
mm/.4”)
21BZA610
CONTACT POINTS
Part No. 131260, Flat Point, Carbide Tip.
Part No. 131262, .3” Ball Point.
Part No. 131265, .6” Ball Point.
Part No. 131268, 1” Ball Point.
Part No. 131271, .04” Needle point, Carbide tipped.
Part No. 131279, .5” Needle point, Carbide tipped.
Part No. 131274, .4” Spherical Point, Carbide Tip.
Part No. 139167, 1/2” Extension Rod.
Part No. 301655, 1” Extension Rod.
Part No. 301657, 2” Extension Rod.
Part No. 301659, 4” Extension Rod.
Spherical Point
Flat Point
Needle point
Ball Point
Extension Rod
BACKS
Part No. 101211, Flat Back for Series 1.
Part No. 101039, Flat Back for Series 2.
Part No. 101307, Lug-on-Center Back for Series 1 inch type.
Part No. 101306, Lug-on-Center Back for Series 2 inch type.
ACCESSORIES
Part No. 900209, 100 mm Holding Bar.
Part No. 900211, 115 mm Holding Bar.
Part No. 900306, 4” Holding Bar.
Part No. 900321, Swivel clamp for 4 and 8 mm dovetail.
Part No. 900322, Swivel clamp for .157” and 3/8” dia. dovetail.
900209
Lug-on-Center Back
SP05-6
GREGG DISTRIBUTORS LTD.
900321
SPC CABLE WITH DATA SWITCH
•For 543 series indciator.
Part No. 05CZA662, 40”/1 m.
Part No. 05CZA663, 80”/2 m.
MITUTOYO
MIT/2825
Bore & Hole Gauges
ABSOLUTE DIGIMATIC BORE GAUGE BORE GAUGES - SERIES 511
•Most popular Bore Gauges •Carbide-tipped contact points
- SERIES 511
•The minimum value holding function provides the easy detection of hole diameter •Up to three sets of master value and
upper/lower tolerance value can be memorized •An analog
bar indicator is integrated to enhance the intuition in reading
•GO/±NG judgment is performed by setting the upper and
lower tolerances •Up to four rods (250 mm or 500 mm) can
be used
for durability •The dial indicator is fully protected by a rugged
cover •Dial indicators sold separately for all except #511-743
Part No.
Range
•Carbide-tipped contact points for durability •The dial indicator
is fully protected by a rugged cover
Technical Data
Accuracy: 2μm / .00008”
Indication stability: 1μm / .00004”
Graduation: 0.01 mm, 0.001 mm, .0005” or .0001”
Measuring
Number of Anvils Number of
Range
Spacers
Metric - Gauge Stem ø 8mm
511-701
18 - 35 mm 9
2
511-702
35 - 60 mm 6
4
511-703
50 - 150 mm 11 (50 mm Sub Anvil)
4
Inch - Gauge Stem ø 3/8”
511-731
.7-1.4” 9
2
511-732
1.4-2.5”
6
4
511-733
2.0 - 6.0” 11 (2” sub anvil)
4
511-743*
2.0 - 6.0” 11 (2” sub anvil)
4
Part No.
Technical Data
Accuracy: Wide Range: 0.003 mm/.00012”
Narrow Range: 0.002 mm/.00008”
Resolution: .00005"/0.001 mm
Display: LCD
Battery: 357BPZ
Battery life: Approx. 9 months for normal use
Dust/Water protection level: Conforming to IP53
511-521
3 PC. BORE GAUGES - SERIES 511
Probe depth
1.8-4”/45-100 mm 6” (152.4 mm)
*Comes with #2922SB Graduation dial indicator
BOREMATIC SET - SERIES 568
The Borematic enables the operator to take measurements more accurately and quicker than
ever before. Once the origin point is set with the ORIGIN button, the Borematic retains the
setting for the entire battery life. Therefore no longer repeated origin setting (presetting) is
necessary.
•TiN-coated measuring contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole •Large LCD digits of 8.5 mm height
for error-free reading •330° rotatable display unit for easy reading at any angle •GO/NO-GO
judgment function •The ABSOLUTE linear encoder
eliminates over-speed errors •With SPC data output
•Measurement can be taken closer to the bottom of a
blind bore •Supplied in fitted wooden case •Each set
includes one display unit with interchangeable measuring
heads of the sizes specified and extension rod •Range:
6 - 12 mm
Part No. 568-924.
Measuring
Number of Anvils Number of
Range
Spacers
Metric - Gauge Stem ø 8mm
511-921
18 - 150 mm 26 (50 mm Sub Anvil)
10
Inch - Gauge Stem ø 3/8”
511-931*
.7 - 6” 26 (2” sub anvil)
10
Part No.
4 PC. SMALL HOLE GAUGES - SERIES 154
•Used with an outside micrometer for measuring inside diameter of bores •4 sizes of gauges are
supplied in a fitted pouch •Extra long for gaging
deep and shallow holes, slots, and similar
workpieces •Gaging surface is fully hardened to
insure long tool life
Part No. 154-901, Set comes with the following:
Part No. 154-105, .125” - .2” DIA. gauge.
Part No. 154-106, .2” - .3” DIA. gauge.
Part No. 154-107, .3” - .4” DIA. gauge.
Part No. 154-108, .4” - .5” DIA. gauge.
Technical Data
Resolution: 0.001 mm or .00005"/0.001 mm
Contact point: Carbide or TiN coating
Measuring method: Three-point method
Display: LCD
Battery: 357BPZ
Battery life: Approx. 7,000 hours
Radius Gauges
RADIUS GAUGES - SERIES 186
•Radius size is stamped on each gauge •Both concave and convex radius
gauges become a pair •With a locking clamp •180° arc
Part No.
Inch
186-101
186-102
Metric
186-105
186-106
Range
Composition of Leaves
1/32” - 1/4” 15 pairs: 1/32” - 1/4” by 64ths
17/64” - 1/2” 16 pairs: 17/64” - 1/2” by 64ths
1 - 7 mm 34 pairs: 1 - 3 mm by 0.25 mm 3.5 - 7 mm by 0.5 mm
7.5 - 15 mm 32 pairs: 7.5 - 15 mm by 0.5 mm
186-102
186-105
25 PC. RADIUS GAUGE SET - SERIES 186
MITUTOYO Radius Gauges are recommended for checking or laying out concave or convex
radii. An individual gauge for each dimension makes it
possible to verify radius or fillet dimensions easier, faster
and more accurately in machining, layout, inspection and
pattern-making work. The measuring surfaces are precisely
finished with smooth, accurate edges. Each Radius Gauge
has five measuring locations, and it is identified with its
particular radius dimensions. The gauges have a satin or
dull-chrome finish. The holding case is provided to protect
the sets of Radius Gauges, have indexed pockets to facilitate the selection of the proper size gauge. A 4” long holder
is furnished with this set to make it possible to check radii
in confined or hard-to-reach locations. 25 leaves with sizes
from 1/64”–17/64” by 64ths and 9/32”–1/2” by 32nds.
Part No. 186-901.
www.greggdistributors.ca
SP05-7
MITUTOYO
MIT/2825
Depth & Snap Gauges
DIAL DEPTH GAUGE - SERIES 7
6 PC. TELESCOPING SNAP GAUGES - SERIES 155
•Bottom surface of the base is hardened, ground and lapped
for highest degree of flatness •Extension Rod: 4 pcs. (.5”, 1”,
2”, 4”)
•Spring-loaded plunger expands within the bore (or groove), allowing determination of the
internal diameter (or groove width) •With a knurled clamp •Supplied in a fitted pouch
Part No. 155-903, Set comes with the following:
Part No. 155-121, .313” - .5” gauge.
Part No. 155-122, .5” - .75” gauge.
Part No. 155-123, .75” - 1.25” gauge.
Part No. 155-124, 1.25” - 2.125” gauge.
Part No. 155-125, 2.125” - 3.5” gauge.
Part No. 155-126, 3.5” - 6” gauge.
Technical Data
Dial reading: .001” or 0.01mm
Flatness of base face: 5μm or 2μm
Contact point: Carbide-tipped ball point
Measuring force: 2.5N
Part No. Range Graduation Stroke Accuracy
7218S 0-8” .001” 1”
±.002”
Base
WxT
4” x .63”
Calipers & Accessories
ABSOLUTE DIGIMATIC CALIPER SERIES 500
•Large and clear LCD readout •The ZERO/ABS key allows the
display to be Zero-Set at any slider position along the scale for
incremental comparison measurements. This switch will also
allow return to the absolute (ABS) coordinate and display of the
true position from the origin point (usually jaws-closed point).
•Thumb roller included only on calipers up to and including 12”
or 300 mm •Supplied in fitted plastic case
Technical Data
Resolution: .0005”/0.01 mm or 0.01 mm
Repeatability: .0005”/ 0.01 mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Battery: 357BPZ
Battery life: Approx. 3.5 years under normal use
Part No.
500-171-30 500-172-30
500-173 500-193*
500-196-30*
500-197-30*
500-506-10**
Range
Resolution
Accuracy
0-6”/0-150 mm .0005”/0.01 mm ±.001”
0-8”/0-200 mm .0005”/0.01 mm ±.001”
0-12”/0-300 mm .0005”/0.01 mm ±.0015”
0-12”/0-300 mm .0005”/0.01 mm ±.0015”
0-6”/0-150 mm .0005”/0.01 mm ±.001”
0-8”/0-200 mm .0005”/0.01 mm ±.001”
0-24”/0-600 mm .0005”/0.01 mm ±.002”
DIAL CALIPER - SERIES 505
ABSOLUTE COOLANT PROOF
CALIPER - SERIES 500
•Can be used in workshop conditions exposed to coolant,
water, dust or oil •Easy to use - no need to wipe or clean the
scale •Advanced design styling •Incorporates absolute (ABS)
measurement system •Automatic power-on/off •With thumb
roller •Supplied in fitted plastic case •No SPC data output
Part No.
Technical Data
Resolution: .0005”/0.01 mm or 0.01 mm
Repeatability: .0005” / 0.01 mm
Display: LCD
Length standard: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: 357BPZ
Battery life: Approx. 3 years under normal use
Dust/Water protection level: IP67
Part No.
500-752-10
500-753-10
500-754-10
Range
Resolution
• New designed dial movement for ultra smooth sliding and
high shock protection •Titanium Nitride (TiN) coating is applied
to the sliding surface to increase wearresistance (except for
0-12” and 0-300 mm model) •Lock screw for dial bezel and for
holding the sliding jaw position •Can measure OD, ID, depth,
and steps •Supplied in fitted plastic case
Accuracy
Range
.1” Per One Revolution
505-675
0-6” 505-676
0-8” 505-677
0-12” .2” Per One Revolution
505-717
0-6” 505-719
0-8” Graduation
Accuracy
.001”
.001”
.001”
+/-.001”
+/-.002”
+/-.002”
.001”
.001”
+/-.001”
+/-.002”
0-6”/0-150 mm .0005”/0.01 mm +/-.001”
0-8”/0-200 mm .0005”/0.01 mm +/-.001”
0-12”/0-300 mm .0005”/0.01 mm +/-.0015”
*Without SPC data output
** Without Thumb Roller
VERNIER CALIPER - SERIES 530
•Can measure OD (outside diameter), ID (inside diameter),
depth, and steps •The small vernier face angle (14°) provides
easy reading •Dual reading scales on vernier •Lock screw for
holding the sliding jaw position •Supplied with vinyl holster in
fitted carton
VERNIER CALIPER - SERIES 531
•The slider moves only when the spring loaded thumb clamp is
depressed •Can measure OD, ID, depth, and steps •Supplied
with vinyl holster in fitted carton
ABSOLUTE DIGIMATIC DEPTH
GAUGE - SERIES 571
• ABSOLUTE Digimatic Depth Gauge can keep track of the
origin point once set for the entire life of the battery •Base and
measuring faces are hardened and micro-lapped •With SPC
data output
Thumb clamp.
Vernier Graduation
Accuracy
Lower
Upper
530-104 0-150 mm/0-6” 0.05 mm 1/128” ±0.05 mm
530-105
0 - 6” .001” 1/128” ±.0015”
530-116
0 - 8” .001” 1/128” ±.0015”
Part No.
Range
Vernier Graduation
Accuracy
Lower
Upper
531-128 0-150 mm/0-6” 0.02 mm .001” ±0.03 mm
Part No.
Range
Technical Data
Resolution: .0005”/0.01 mm or 0.01 mm
Repeatability: 0.01 mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Battery: 357BPZ
Battery life: Approx. 20,000 hours (3 years) under normal use
Part No.
Range
Resolution
Accuracy Mass (g)
571-213-10 0-12”/0-300 mm .0005”/0.01 mm ±.0015” 310
SPC CABLE WITH DATA SWITCH
•For 500 and 571 series calipers.
Part No. 05CZA662, 40”/1 m.
Part No. 05CZA663, 80”/2 m.
SP05-8
GREGG DISTRIBUTORS LTD.
ABSOLUTE Linear Encoder
Mitutoyo's technology has realized the absolute position method (absolute method). With this
method, you do not have to reset the system to zero after turning it off and then turning it on.
The position information recorded on the scale is read every time. These encoders are widely
used in a variety of measuring instruments as the length measuring system that can generate
highly reliable measurement data.
MITUTOYO
MIT/2825
Rulers, Squares, Combo Squares, and Protractors
COMBINATION SQUARE SETS - SERIES 180
•Measuring head are attached to the graduated steel rule (blade), allowing versatile measurements on various types of workpieces •The measuring head come hardened or cast iron-nothardened
Blade
Blade Square Head Center Head Protractor Head
Part No.
Part No.
Part No.
Part No.
Part No.
Size
180-905B 12”
180-501B180-102B 180-202B 180-301B*
180-907B 12”/300 mm
-
180-102B180-202B 180-301B*
*Cast iron-not hardened
SEMI-FLEXIBLE RULES - SERIES 182
STEEL RULES - SERIES 182
•Clear graduations on satin-chrome finish •Stainless tempered
Part No.
Size
Graduations
Width
Wide Rigid Rules (thickness 3/64”)
182-101 6
1/8, 1/16, 1/32, 1/64th
3/4”
182-103 6”
1/32, 1/64, 1/10, 1/100th
3/4”
182-105 6” x 150 mm 1/32, 1/64, 1 mm, 0.5 mm
3/4”
182-111 150 mm
1 mm, 0.5 mm, 1 mm, 0.5 mm 19 mm
182-121 12”
1/8, 1/16, 1/32, 1/64th
1”
182-125 12” x 300 mm 1/32, 1/64, 1 mm, 0.5 mm
1”
Full-Flexible Rules (thickness 1/64”)
182-201 6”
1/8, 1/16, 1/32,1/64th
1/2”
182-203 6”
1/32, 1/64, 1/10, 1/100th
1/2”
182-205 6” x 150 mm 1/32, 1/64, 1 mm, 0.5 mm
1/2”
182-225 12” x 300 mm 1/32, 1/64, 1 mm, 0.5 mm 1/2”
•Engraved on frontside only •Graduations: 1/2 mm, 1 mm, 1/32, 1/64, 1/16th
Part No.
Size
Accuracy
+.004” / –.0035”
(+0.1 mm / –0.09 mm)
+.005” / –.0035”
(+0.13 mm / –0.09 mm)
STANDARD GAUGES SERIES 950
•Each drill gauge is marked with drill size in fractions and decimals
•Satin chrome finish •Tap and drill gauge shows the correct tap drill for
National Fine or National Coarse thread series •Approximate plate size
is 6-3/8” x 2½” x 5/64”
•Made of high quality steel •Satin chrome
finish •Size: Gauge Range 0–36
Part No. 950-202, American Standard.
Size
950-204 Drill Gauge / Mach. Screw Gauge 950-206 Fractional Drill Gauge 950-208 Metric Drill Gauge 950-209 A to Z Alphabet Drill Gauge POCKET STEEL RULE SERIES 950
+.005” / –.0035”
(+0.13 mm / –0.09 mm)
5/8”
5/8”
TAP & DRILL GAUGE - SERIES 950
Type
+.004” / –.0035”
(+0.1 mm / –0.09 mm)
Width
182-302 6” x 150 mm +.004” / –.0035” (+0.1 mm / –0.09 mm)
182-305 12” x 300 mm +.005” / –.0035” (+0.13 mm / –0.09 mm)
Part No.
Accuracy
Tap Size 2–56 to 1/4–28
Drill Size 1/16” to 1/2”
1.0 to 5.9 mm 57 holes
Drill size A to Z
SPRING DIVIDERS & CALIPERS - SERIES 950
PROTRACTOR - SERIES 968
•Engraved on frontside only •Backside: Inch/
Metric equivalents •Graduation: 1 mm /
1/64ths •Accuracy: +.004”/-.0035” (+0.1 mm
/ -0.09 mm)
Part No. 950-300, 6” x 150 mm.
Basegular Base Protractor’s scale plate and
indicator blade are made entirely of stainless
steel. Satin chrome finish. With 6” arm.
Part No. 968-202, Semi-Circle: 0°-180°,
180°-0°.
•Spring Divider - Fully hardened and tempered joints, spring, washers and divider points.
•Contact ends fully rounded to give accurate dimensions.
Spring Divider
Part No.
950-212 950-213 Outside Spring Inside Spring
Calipers
Calipers
Part No.
Part No.
950-222 950-232
950-223 950-233
Spring Divider
Outside Spring
Calipers
Range
6” (150 mm)
8” (200 mm)
Inside Spring
Calipers
SCRIBERS - SERIES 985
985-101
985-102
985-103
985-104
Scribers
MITUTOYO provides a full line of scribers to accommodate every shop need. All
the scribers have tungsten-carbide tips. #985-104 is retractable.
Part No. 985-104, 5.75” length.
Part No. 985-102, 6.12” length.
Part No. 985-101, 6.75” length.
Part No. 985-103, 8.87” length.
www.greggdistributors.ca
SP05-9
MILWAUKEE
MWK/2827
M28 Cordless Power Tools
M28™ CORDLESS LITHIUM-ION GRINDER / CUT-OFF TOOL KIT
•28V motor delivers 8000 RPM no load speed •Overload protection for preventing over-heating •Soft start reduces
start-up torque and improves gear life •Large spindle lock for quick wheel replacement •Tool free guard provides
easy guard adjustment •Slide on switch reduces user fatigue •Fuel gauge indicates remaining run time
Includes: Grinder, (1) M28 REDLITHIUM™ Battery Pack, Contractor Bag, 28-Volt Charger, Cut-Off Wheel, and
Grinding Wheel
SPECIFICATIONS
Part No. 0725-21.
Voltage: 28 DC
Part No. 0725-20, Tool only.
Length: 14”
No Load Speed: 8000 RPM
Tool Weight: 6.8 lbs
M18 Fuel Cordless Power Tools
M18 FUEL™ 1/4” HEX IMPACT
DRIVER
•Milwaukee® POWERSTATE™ Brushless Motor runs cooler,
lasts longer and delivers up to 55% faster application speed
•REDLINK PLUS™ Electronic Intelligence allows the operator
to choose between 3 fastening modes with Milwaukee’s
proprietary DRIVE CONTROL™ feature •DRIVE CONTROL™:
Three fastening modes provide variable power and speed for
precision work and heavy duty applications
Includes: Impact Driver, (2) M18™ REDLITHIUM™ XC 4.0
Battery, Multi-Voltage Charger, Belt Clip, and Carrying Case
Part No. 2653-22.
Part No. 2653-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 5½”
Peak Torque: 1,600 in-lbs
No Load Speed: 0-2,900 RPM
No Load IPM: 0-3,600
M18 FUEL™ 1/2” HIGH TORQUE
IMPACT WRENCH WITH FRICTION
RING KIT
•Superior performance: Delivers up to 700 ft-lbs of maximum
fastening torque, up to 1,100 ft-lbs of nut-busting torque and
up to 2X more runtime •POWERSTATE™ Brushless Motor:
Outpowers competitors yet runs cooler with no wearable
components •REDLINK PLUS™ Intelligence: allows the operator to choose between 2 fastening modes with Milwaukee’s
proprietary DRIVE CONTROL™ feature. Mode 1 delivers up to
100 ft-lbs of maximum fastening torque, and Mode 2 up to 700
ft-lbs maximum fastening torque •1/2” Anvil with friction ring for
fast, easy socket changes
Includes: Impact Wrench, (2) M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack, Multi-Voltage Charger, and
Carrying Case
Part No. 2763-22.
Part No. 2763-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
LED Light: Yes
Electric Brake: Yes
Switch Type: Variable Speed Trigger
Anvil Size and Type: 1/2” Square - Friction Ring
Torque: 100 ft-lbs (Mode 1) and 700 ft-lbs (Mode 2)
Nut-Busting Torque: 1,100 ft-lbs
SP05-10 GREGG DISTRIBUTORS LTD.
M18 FUEL™ 3/8” IMPACT WRENCH
KIT WITH FRICTION RING
•Delivers a best-in-class 200 ft-lbs. and 2,400 in-lbs of torque in
a compact design •The Milwaukee® POWERSTATE™ Brushless Motor provides increased efficiency, lasts longer and delivers maximum power •REDLINK PLUS™ Electronic Intelligence
allows the operator to choose between 3 fastening modes with
Milwaukee’s proprietary DRIVE CONTROL™ feature •Utilizes
a friction ring design for fast, easy socket changes
Includes: Impact Wrench, (2) M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack, Multi-Voltage Charger, Belt
Clip, and Carrying Case
Part No. 2654-22.
Part No. 2654-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 6”
Weight: 3.8 lbs
No Load IPM: 0-3,100
No Load RPM: 0-2,400
Torque: 200 ft-lbs/ 2,400 in-lbs
M18 FUEL™ 1/2” IMPACT WRENCH
KIT WITH BALL-PIN
•Delivers a best-in-class 210 ft-lbs. and 2,520 in-lbs of torque
in a compact design •The Milwaukee® POWERSTATE™
Brushless Motor provides increased efficiency, lasts longer
and delivers maximum power •REDLINK PLUS™ Electronic
Intelligence allows the operator to choose between 3 fastening
modes with Milwaukee’s proprietary DRIVE CONTROL™
feature •Utilizes a ball-pin detent design for maximum socket
retention
Includes: Impact Wrench with Ball-Pin, (2) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack, Multi-Voltage
Charger, Belt Clip, and Carrying Case
Part No. 2655B-22.
Part No. 2655B-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 6”
Weight: 3.9 lbs
Peak Torque: 210 ft-lbs (2,520 in-lbs)
No Load Speed: 0-2,400 RPM
No Load IPM: 0-3,100
M18 FUEL™ 3/4” HIGH-TORQUE
IMPACT WRENCH WITH FRICTION
RING KIT
M18 FUEL™ SAWZALL®
RECIPROCATING SAW KIT
SPECIFICATIONS
Voltage: 18V
LED Light: Yes
Electric Brake: Yes
Switch Type: Variable Speed Trigger
Anvil Size and Type: 3/4” Square - Friction
Ring w/ Thru Hole
Torque: 375 ft-lbs (Mode 1) and 750 ft-lbs
(Mode 2)
Nut-Busting Torque: 1,200 ft-lbs
SPECIFICATIONS
Voltage: 18V
Length: 18-1/2”
Weight: 8.9 lbs
LED Light: Yes
Stroke Length: 1-1/8”
Keyless Adjustable Shoe: Yes
Keyless Blade Clamp: Yes
Blade Clamp: QUIK-LOK® Universal
SPM: 0-3,000
•Superior performance: Delivers up to 750 ft-lbs of maximum
fastening torque, up to 1,200 ft-lbs of nut-busting torque and
up to 2X more runtime •POWERSTATE™ Brushless Motor:
Outpowers competitors yet runs cooler with no wearable
components •REDLINK PLUS™ Intelligence: allows the operator to choose between 2 fastening modes with Milwaukee’s
proprietary DRIVE CONTROL™ feature. Mode 1 delivers up to
375 ft-lbs of maximum fastening torque, and Mode 2 up to 750
ft-lbs maximum fastening torque •3/4” Anvil with friction ring for
fast, easy socket changes
Includes: Impact Wrench, (2) M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack, Multi-Voltage Charger, and
Carrying Case
Part No. 2764-22.
Part No. 2764-20, Tool Only.
•Superior performance: Delivers the fastest cutting speed in
its class, increased power and the durability of corded saws
•POWERSTATE™ Brushless Motor: Supplies constant power
for faster cuts and reduced heat for extended life •REDLINK
PLUS™ Intelligence: Provides optimized performance and
overload protection using total system communication between
tool, battery and charger
Includes: Reciprocating Saw, M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack, Multi-Voltage Charger, Blade,
and Carrying Case
Part No. 2720-22, Includes (2) Batteries.
Part No. 2720-21, Includes (1) Battery.
Part No. 2720-20, Tool Only.
MILWAUKEE
MWK/2826/2827
M18 Fuel Cordless Power Tools
M18 FUEL™ 6½” CIRCULAR SAW KIT
•POWERSTATE™ Brushless Motor: Outpowers all other 18-volt
cordless circular saws and provides up to 3X longer tool life
•REDLINK PLUS™ Intelligence: The most advanced electronic
system on the market maximizes performance
Includes: Circular Saw, M18™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack, Multi-Voltage Charger, Blade,
Blade Wrench, and Contractor Bag
Part No. 2730-22, Includes (2) Batteries.
Part No. 2730-21, Includes (1) Battery.
Part No. 2730-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 16”
Weight: 8 lbs
LED Light: Yes
Speed: 5,000 RPM
Arbor Size: 5/8”
Blade Guard: Magnesium
Shoe: Magnesium
Maximum Bevel Capacity: 50°
M18 FUEL™ 4½” / 5” GRINDER,
PADDLE SWITCH NO-LOCK KIT
•POWERSTATE™ Brushless Motor: Delivers maximum power
and up to 10X longer motor life •REDLINK PLUS™ Intelligence
provides optimized performance, electronic clutch, and overload protection using total system communication between tool,
battery and charger •POWER TO GRIND: World’s first cordless
grinder with corded performance •DURABILITY: Same metal
housing and gearing system as legendary high performance
corded grinders •100% tool free: Make all accessory changes
and guard adjustments without a wrench for increased productivity •Paddle-switch design: Provides increased comfort and
ease-of-use when operating in various positions
Includes: Grinder, (2) M18™ REDLITHIUM™ XC 4.0 Extended
Capacity Battery Pack, Multi-Voltage Charger, Carrying Case,
Flange Nuts, Wheel Guard, and Spanner Wrench
Part No. 2780-22, Includes (2) Batteries.
Part No. 2780-21, Includes (1) Battery.
Part No. 2780-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 15”
Weight: 5.8 lbs
Switch Type: Paddle No-Lock
Speed: 8,500 RPM
Trigger Lock: No
Arbor Size: 5/8”-11
M18 FUEL™ 4½” / 5” GRINDER, SLIDE
SWITCH LOCK-ON KIT
•POWERSTATE™ Brushless Motor: Delivers maximum power
and up to 10X longer motor life •REDLINK PLUS™ Intelligence
provides optimized performance, electronic clutch, and overload protection using total system communication between tool,
battery and charger •POWER TO GRIND: World’s first cordless
grinder with corded performance •DURABILITY: Same metal
housing and gearing system as legendary high performance
corded grinders •100% tool free: Make all accessory changes
and guard adjustments without a wrench for increased productivity •Slide switch: Reduces user fatigue
Includes: Grinder, (2) M18™ REDLITHIUM™ XC 4.0 Extended
Capacity Battery Pack, Multi-Voltage Charger, Carrying Case,
Flange Nuts, Wheel Guard, and Spanner Wrench
Part No. 2781-22, Includes (2) Batteries.
Part No. 2781-21, Includes (1) Battery.
Part No. 2781-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 15”
Weight: 5.8 lbs
Switch Type: Slide with Lock-On
Speed: 8,500 RPM
Trigger Lock: Yes
Arbor Size: 5/8”-11
M18 Cordless Power Tools
M18™ 1/2” HAMMER DRILL/DRIVER
KIT
•Milwaukee® 4-Pole Frameless Motor: Features a robust
design combined with rare-earth magnets for longer life,
best-in-class 0-400/0-1,800 RPM •Compact Design: Allows
greater accessibility in tight work spaces •All-Metal Gear Case
and Chuck: Provide maximum impact and shock durability
•REDLINK™ Intelligence: Advanced overload protects the tool
against abusive situations and provides maximum life
Includes: M18™ Compact 1/2” Hammer Drill/Driver, MultiVoltage Charger, and Carrying Case
Part No. 2607-22, Comes with (2) M18™ REDLITHIUM™ XC
Extended Capacity Batteries.
Part No. 2607-22CT, Comes with (2) M18™ REDLITHIUM™
Compact Batteries.
Part No. 2607-20, Tool only.
SPECIFICATIONS
Voltage: 18V
Speed: 0-400/ 0-1,800 RPM
Peak Torque: 2607-22/ 525 in-lbs ; 2607-22CT/ 500 in-lbs
Chuck Type: 1/2” Metal Single Sleeve - Ratcheting Lock
Height: 7-3/5”
Length: 7-3/4”
M18™ CORDLESS LITHIUM-ION
MULTI-TOOL KIT
M18™ CORDLESS 5/8” SDS PLUS
ROTARY HAMMER KIT
•Powerful 18-volt motor: Delivers 0-1,300 RPM and 0-7,000
BPM •2-Mode operation: Choose rotary hammer or rotation
only for added versatility •LED light: Illuminates dark work
spaces
Includes: Rotary Hammer, M18™ REDLITHIUM™ XC Extended Capacity Battery, Multi-Voltage Charger, Carrying Case,
Depth Rod, and Side Handle
Part No. 2612-22, Includes (2) Batteries.
Part No. 2612-21, Includes (1) Battery.
Part No. 2612-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Length: 12”
Weight: 5.5 lbs
No Load Speed: 0-1,300
Blow Energy: 1 ft.-lb
BPM: 0-7,000
Solid Bit Capacity: 5/8”
•Powerful motor: Delivers 11,000 to 18,000 OPM •All-metal gear case: Provides added jobsite
durability •Tool-free blade change: Offers faster changes and no tools to misplace •Built-in
LED light: Illuminates dark work spaces
Includes: Multi-Tool, (2) M18™ REDLITHIUM™ XC Extended Capacity Battery, Multi-Voltage
Charger, Adapter, (5) Assorted Sanding Sheets, Contractor Bag, Sanding Pad, and Wood
Cutting Blade
Part No. 2626-22.
Part No. 2626-20, Tool only.
SPECIFICATIONS
Voltage: 18V
Length: 14”
Weight: 4.15 lbs
M18™ HACKZALL® RECIP SAW KIT
•One-handed design provides superior control & versatility over
a standard reciprocating saw •Compact size allows for cutting
in tight spaces, and light weight makes overhead work easier
QUIK-LOK® Blade Clamp offers fast, easy tool free blade
changes for SAWZALL® Blades and HACKZALL® Blades
•Built-In LED light illuminates the work surface while cutting
•Compatible with M18™ XC High Capacity RED LITHIUM™
Batteries and M18™ Compact RED LITHIUM™ Batteries
Includes: Recip Saw, (1) M18™ REDLITHIUM™ XC Extended
Capacity Battery, Multi-Voltage Charger, and Contractor Bag
Part No. 2625-21.
Part No. 2625-20, Tool Only.
SPECIFICATIONS
Voltage: 18V
Keyless Blade Clamp: Yes
DUST EXTRACTION KIT
For use with the M18™ Multi-Tool, the Dust Extraction Kit is
designed to help keep your work area clean during sanding applications and reduce clean up time. The dust extractor fits onto a 1-1/4”
vacuum hose for easy dust collection.
Includes: (5) 120 Grit Sanding Sheet, (5) 60 Grit Sanding Sheet, (5)
80 Grit Sanding Sheet, Dust Extractor, and Sanding Pad
Part No. 49-90-2400.
DEPTH STOP
For use with the M18™ Multi-Tool, the Depth Stop is designed
to give users the confidence to complete plunge cuts in drywall,
wood, flooring and other materials without worrying about
damaging covered or unseen materials.
Part No. 49-90-2410.
www.greggdistributors.ca SP05-11
MILWAUKEE
MWK/2826/2827
M18 Cordless Power Tools & Batteries
M18™ CORDLESS 2-SPEED GREASE GUN KIT
•Industry leading 10,000 PSI max operating pressure •Industry leading max flow-rate of up to 10
oz. / minute •New to world precision through Pre-set grease counter dial
48” flexible hose offers greater access to difficult to reach fittings •Air bleeder valve for quick
priming •Lock-on / Lock-off trigger delivers added user convenience
Includes: Grease Gun, 48” Flex Hose w/ Spring Guard, M18™ REDLITHIUM™ Compact Battery,
Multi-Voltage Charger, High Pressure Grease Coupler, Hard Carrying Case, and Shoulder Strap
Part No. 2646-22CT, Includes (2) Batteries.
Part No. 2646-21CT, Includes (1) Battery.
Part No. 2646-20, Tool only.
Part No. 49-16-2646, 400g Clear Barrel.
Part No. 49-16-2647, 48” Replacement Hose with HP Coupler.
SPECIFICATIONS
Voltage: 18V
Length: 15”
Weight: 8.5 lbs
PSI: 10,000 PSI
Run Time: Up to 10 Grease Cartridges per Charge
Hose Length: 48”
M18™ REDLITHIUM™ XC
EXTENDED CAPACITY
BATTERY
•REDLINK™ Intelligence: Provides optimized
performance and overload protection using
total system communication between tool, battery and charger •Best-in-class construction:
Offers long-lasting performance and durability
•Fuel gauge onboard: Displays remaining
runtime for less downtime on the job •Allweather performance: Delivers fade-free power
in extreme jobsite conditions
Part No. 48-11-1828.
Part No. 48-11-1822, Pack of 2.
M18™ JOBSITE RADIO/CHARGER
•Built-In Charger: Quick, convenient charging of all M18™ batteries •Exclusive Digital Bluetooth® Receiver: Streams audio wirelessly from over 100 ft. away •USB Power Port: 50% faster
device charging, plugged in or on the go •Premium Speakers and 40-Watt Amplifier: Produce a
rich, full sound •Customizable Equalizer and 10-Station Preset:
Delivers personalized, enhanced sound •Reinforced Roll Cage
and Metal Handles: Protects against abusive jobsite conditions
•Weather-Sealed Compartment: Offers on-board protection for
small belongings and a smart phone •On-Board Bottle Opener:
For convenience on and off the jobsite
Part No. 2792-20.
M18™ REDLITHIUM™
COMPACT BATTERY
M18™ REDLITHIUM™ XC
4.0 EXTENDED CAPACITY
BATTERY
Delivers more runtime, power and speed
than standard lithium-ion batteries.
•REDLINK™ Intelligence: Provides optimized
performance and overload protection using
total system communication between tool, battery and charger •Best-in-class construction:
Offers long-lasting performance and durability
•Fuel gauge onboard: Displays remaining
runtime for less downtime on the job •Allweather performance: Delivers fade-free power
in extreme jobsite conditions
Part No. 48-11-1815.
Part No. 48-11-1811, Pack of 2.
M18™ REDLITHIUM™ 2.0
COMPACT BATTERY
Delivers up to 2X more runtime, 20%
more power and 2X more recharges than
standard lithium-ion batteries.
•REDLINK™ Intelligence: Provides optimized
performance and overload protection using
total system communication between tool, battery and charger •Best-in-class construction:
Offers long-lasting performance and durability
•Fuel gauge onboard: Displays remaining
runtime for less downtime on the job •Allweather performance: Delivers fade-free power
in extreme jobsite conditions
Part No. 48-11-1820.
Delivers up to 2X more runtime, 20%
more power and 2X more recharges than
standard lithium-ion batteries.
•REDLINK™ Intelligence: Provides optimized
performance and overload protection using
total system communication between tool, battery and charger •Best-in-class construction:
•Offers long-lasting performance and durability
•Fuel gauge onboard: Displays remaining
runtime for less downtime on the job •Allweather performance: Delivers fade-free power
in extreme jobsite conditions
Part No. 48-11-1840.
M18™ SIX PACK SEQUENTIAL CHARGER
The M18™ Six Pack Sequential Charger offers a compact design,
integrated hang holes for vertical mounting, and a pass through plug
to conserve outlet space. The new unit will charge M18™ compact
batteries in 30 minutes and extended capacity (XC) batteries
in 60 minutes. With this new six pack charger, users can
reduce the amount of time spent changing out batteries,
increasing productivity on the jobsite.
Part No. 48-59-1806.
M12 Fuel Cordless Power Tools
M12 FUEL™ 1/4” IMPACT WRENCH
KIT
•POWERSTATE™ Brushless Motor: Delivers up to 500 in-lbs
of peak torque with maximum sustained torque to complete a
variety of applications •REDLINK Plus™ Intelligence: The most
advanced system of cordless power tool electronics. Provides
optimized performance and overload protection using total system communication between tool, battery and charger •DRIVE
CONTROL™: Two fastening modes provide variable power and
speed for precision work and heavy duty applications
Includes: Impact Wrench, (2) M12 REDLITHIUM™ 2.0
Compact Battery Pack, Battery Charger, Belt Clip, and Carrying
Case
Part No. 2452-22.
Part No. 2452-20, Tool only.
SPECIFICATIONS
Voltage: 12V
Length: 5¾”
Peak Torque: 500 in-lbs
No Load Speed: 0-2,650 RPM
No Load IPM: 0-4,000
SP05-12 GREGG DISTRIBUTORS LTD.
M12 FUEL™ 1/4” HEX IMPACT
DRIVER KIT
M12 FUEL™ 3/8” IMPACT WRENCH
KIT
SPECIFICATIONS
Voltage: 12V
Length: 6”
Peak Torque: 1,200 in-lbs
No Load Speed: 0-2,650 RPM
No Load IPM: 0-3,550
SPECIFICATIONS
Voltage: 12V
Length: 6½”
Peak Torque: 117 ft-lbs (1,400 in-lbs)
No Load Speed: 0-2,650 RPM
No Load IPM: 0-3,500
•POWERSTATE™ Brushless Motor: Delivers up to 1,200 in-lbs
of peak torque with maximum sustained torque to complete a
variety of applications •REDLINK Plus™ Intelligence: The most
advanced system of cordless power tool electronics. Provides
optimized performance and overload protection using total system communication between tool, battery and charger •DRIVE
CONTROL™: Two fastening modes provide variable power and
speed for precision work and heavy duty applications
Includes: Hex Impact Driver, (2) M12 REDLITHIUM™ 2.0
Compact Battery Pack, Battery Charger, Belt Clip, and Carrying
Case
Part No. 2453-22.
Part No. 2453-20, Tool only.
•POWERSTATE™ Brushless Motor: Delivers up to 1,400 in-lbs
of peak torque with maximum sustained torque to complete a
variety of applications •REDLINK Plus™ Intelligence: The most
advanced system of cordless power tool electronics. Provides
optimized performance and overload protection using total system communication between tool, battery and charger •DRIVE
CONTROL™: Two fastening modes provide variable power and
speed for precision work and heavy duty applications
Includes: Impact Wrench, (2) M12 REDLITHIUM™ 2.0
Compact Battery Pack, Battery Charger, Belt Clip, and Carrying
Case
Part No. 2454-22.
Part No. 2454-20, Tool only.
MILWAUKEE
MWK/2827
M12 Fuel Cordless Power Tools
M12 FUEL™ 1/2” DRILL/DRIVER
•POWERSTATE™ Brushless Motor: Delivers up to 350 in-lbs
of peak torque with maximum sustained torque to complete a
variety of applications •REDLINK Plus™ Intelligence: The most
advanced system of cordless power tool electronics. Provides
optimized performance and overload protection using total
system communication between tool, battery and charger
Includes: Drill/Driver, (1) M12 REDLITHIUM™ 2.0 Compact
Battery Pack, (1) M12™ REDLITHIUM™ XC 4.0 Extended
Capacity Battery Pack, Battery Charger, Belt Clip, and Carrying
Case
Part No. 2403-22.
Part No. 2403-20, Tool only.
SPECIFICATIONS
Voltage: 12V
Length: 7.75”
Peak Torque: 350 in-lbs
Chuck Type: 1/2” Metal Single
Sleeve - Ratcheting Lock
Speed: 0-450/0-1,700 RPM
M12 FUEL™ 1/2” HAMMER DRILL/
DRIVER
M12 FUEL™ 1/4” HEX 2-SPEED
SCREWDRIVER KIT
SPECIFICATIONS
Voltage: 12V
Length: 7.75”
Peak Torque: 350 in-lbs
BPM: 0-25,500
Chuck Type: 1/2” Metal Single
Sleeve - Ratcheting Lock
Speed: 0-450/0-1,700 RPM
SPECIFICATIONS
Voltage: 12V
Weight: 2.0 lbs
No Load Speed: 0-450/0-1,700
Torque: 325 in-lbs
Chuck Size: 1/4” Quick Change Hex
Speed: 2 Speed
Trigger Lock: Yes
Capacity in Steel: 1/2”
•POWERSTATE™ Brushless Motor: Delivers up to 350 in-lbs
of peak torque with maximum sustained torque to complete a
variety of applications •REDLINK Plus™ Intelligence: The most
advanced system of cordless power tool electronics. Provides
optimized performance and overload protection using total
system communication between tool, battery and charger
Includes: Hammer Drill/Driver, (1) M12 REDLITHIUM™ 2.0
Compact Battery Pack, (1) M12™ REDLITHIUM™ XC 4.0
Extended Capacity Battery Pack, Battery Charger, Belt Clip,
and Carrying Case
Part No. 2404-22.
Part No. 2404-20, Tool only.
M12 FUEL™ 5/8” SDS PLUS ROTARY HAMMER KIT
•REDLINK™ Intelligence: Provides optimized performance and overload protection using total
system communication between tool, battery and charger •Electropneumatic mechanism: Drills
up to 5/8” holes in poured concrete and masonry •Powerful 12-volt motor: Delivers 0-900 RPM and 0-6,200 BPM
for superior performance •Compact, lightweight design:
Allows you to work comfortably in tight spaces and all day
•2-Mode operation: Choose rotary hammer or rotation only
for maximum versatility •LED light: Illuminates the work
surface
Includes: Rotary Hammer, (2) M12™ REDLITHIUM™ XC
4.0 Extended Capacity Battery Pack, Battery Charger, and
Plastic Carrying Case
SPECIFICATIONS
Part No. 2416-22XC.
Voltage: 12V
BPM: 0-6,200
Part No. 2416-20, Tool only.
Length: 10”
Solid Bit Capacity: 5/8”
Weight: 3.9 lbs
No Load Speed: 0-900
Drilling Mode: Rotary Hammer
and Rotation Only
•POWERSTATE™ Brushless Motor: Delivers up to 325 in-lbs
of peak torque with maximum sustained torque to complete a
variety of applications •REDLINK Plus™ Intelligence: The most
advanced system of cordless power tool electronics. Provides
optimized performance and overload protection using total
system communication between tool, battery and charger
Includes: Screwdriver, (2) M12 REDLITHIUM™ 2.0 Compact
Battery Pack, Battery Charger, Belt Clip, and Hard Carrying
Case
Part No. 2402-22.
Part No. 2402-20, Tool only.
M12 FUEL™ HACKZALL® RECIP SAW KIT
•One-handed design provides superior control & versatility over a standard recip saw •Compact
size allows for cutting in tight spaces, and light weight makes overhead work easier •POWERSTATE™ Brushless Motor Supplies constant power for faster cuts and reduced heat for
extended life •REDLINK PLUS™ Intelligence Provides optimized performance and overload
protection using total system communication between tool, battery and charger
Includes: Recip Saw, (1) M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack, Battery Charger, Contractor Bag, and Multi-material Blade
Part No. 2520-21XC.
Part No. 2520-20, Tool only.
SPECIFICATIONS
Voltage: 12V
Length: 13.25”
Weight: 4.1 lbs
Stroke Length: 5/8”
Keyless Blade Clamp: Yes (QUIK-LOK® Universal)
SPM: 0-3,000
M12 Cordless Power Tools
M12™ 1/4” IMPACT WRENCH KIT
•Lightweight, compact design allows for fastening in tight
space •New ergonomic handle design for increased comfort
•On-board battery fuel gauge displays remaining run time •1/4”
anvil with friction ring for fast and easy socket changes
Includes: Impact Wrench, (2) M12™ REDLITHIUM™ Battery,
Battery Charger, Belt Clip, and Carrying Case
Part No. 2461-22.
Part No. 2461-20, Tool only.
SPECIFICATIONS
Voltage: 12V
Length: 6”
Weight: 2.1 lbs
Anvil Size and Type: 1/4” Inch Square Friction Ring
No Load IPM: 0-3,800
Height: 7-1/2”
No Load RPM: 0-2,500
Torque: 450 in-lbs
M12™ CORDLESS LITHIUM-ION 1/2”
SDS-PLUS ROTARY HAMMER KIT
•REDLINK™ Intelligence: Provides optimized performance and
overload protection using total system communication between
tool, battery and charger •Electro-pneumatic mechanism: Drills
up to ½” holes in poured concrete and masonry •Powerful 12volt motor: Delivers 0-800 RPM and 0-5,300 BPM for superior
performance •Compact, lightweight design: Allows you to work
comfortably in tight spaces and all day •2-Mode operation:
Choose rotary hammer or rotation only for maximum versatility
•LED Light: Illuminates the work surface
Includes: Rotary Hammer, (2) M12™ XC High Capacity REDLITHIUM™ Battery, Battery Charger, and Carrying Case
Part No. 2412-22XC.
Part No. 2412-20, Tool only.
SPECIFICATIONS
Voltage: 12V
Length: 9”
No Load Speed: 0-800
BPM: 0-5,350
Trigger Lock: No
Solid Bit Capacity: 1/2”
Drilling Mode: 2-Mode: Rotary Hammer and
Rotation Only
M12™ CORDLESS LITHIUM-ION
ROTARY TOOL KIT
•Powerful 12-volt motor: Delivers 5,000-32,000 RPM for
superior speed and performance under load •Unique Milwaukee design: Delivers up to 10X the tool life with grinder-style
exhaust ports and front bearing protection •Variable-speed dial:
Offers fluid control •1/8” Collet: Accommodates all 1/32” - 1/8”
shank accessories for thousands of applications •Compact,
lightweight design: Allows you to work comfortably in tight
spaces and all day
Includes: Rotary Tool, (1) M12™ REDLITHIUM™ Battery,
Battery Charger, Cutting Wheels, Mandrel, Wrench, and
Contractor Bag
Part No. 2460-21.
Part No. 2460-20, Tool only.
SPECIFICATIONS
Voltage: 12V
Length: 9¾”
Weight: 1.3 lbs
No Load RPM: 5,000-32,000
www.greggdistributors.ca SP05-13
MILWAUKEE
MWK/2827
M12 Cordless Power Tools
M12™ 600 MCM CABLE CUTTER KIT
•Powerful open jaws: Cut effortlessly through 600 MCM
copper and 750 MCM aluminum •Superior blade geometry:
Delivers a round and installation-ready cut •Breakthrough
ratcheting mechanism: Fits into tight panels for more effective
cutting •Auto release lever: Cut, reload and quickly repeat for
maximum productivity •2-Speed gear box: Delivers power for
large cables and speed for common smaller cables •Built-in
LED light: Illuminates the line of cut
Includes: Cable Cutter, (1) M12™ XC High Capacity REDLITHIUM™ Battery, Multi-Voltage Charger, and Carrying Case
Part No. 2472-21XC.
Part No. 2472-20, Tool Only.
M12™ CORDLESS SUB-COMPACT
BAND SAW KIT
M12™ 10OZ. CAULK & ADHESIVE
GUN KIT
SPECIFICATIONS
Voltage: 12V
Length: 11”
SFPM: 280
Blade Length: 27” x 1/2” x .020”
SPECIFICATIONS
Voltage: 12V
Length: 26½”
Weight: 4.11 lbs
LASER TEMP-GUN™ M12™
CORDLESS LITHIUM-ION
THERMOMETER KIT
SUB-SCANNER™ M12™ DETECTION
TOOL KIT
•One-Handed Cuts: Most compact size and lightest weight
of any cordless band saw •Powerful Motor: Cuts 3/4” EMT
in 3 seconds, up to 150 cuts per charge with the XC battery
•1-5/8” Cut Capacity: For a wide range of applications •Meets
OSHA Guarding Requirements: Suitable for One-Handed use
•LED Light: Highlights the cut line •Blade Tension Adjustment:
Adjustable blade tracking
Includes: 18 TPI Sub-Compact Band Saw Blade, Band Saw,
(1) M12™ XC High Capacity REDLITHIUM™ Battery, Battery
Charger, and Carrying Case
Part No. 2429-21XC.
Part No. 2429-20, Tool Only.
SPECIFICATIONS
Voltage: 12V
Length: 10½”
Weight: 6 lbs
Blade: M12 600 MCM Cable Cutter
Replacement Blade
LASER TEMP-GUN™ M12™
CORDLESS LITHIUM-ION
THERMOMETER
•Infrared Surface Temperature Measurement from -30 to 800°C
(-22 to 1472°F) •Contact Surface Temperature Measurement
from -40 to 550°C (-40 to 1022°F) •40:1 Distance to Spot Ratio. Measures a one foot spot from 40 ft. away. •High Contrast,
White on Black Display with Backlight for easy reading •Extra
Bright LED Floodlight increases usability in low light conditions
•User Configurable Hi/Low Alarm Settings •Adjustable emissivity from 0.10 to 1.00 for increased accuracy •Unit Memory
stores up to 20 temperature values •Lockable Trigger for tester
to continue measuring
Part No. 2276-20.
Part No. 2276-20NST, Includes a NIST Certificate of Calibration with Data, needed by many organizations as proof of
calibration with the date when NIST Calibration was performed.
SPECIFICATIONS
Temperature Range: -30°C to 800°C (-22° to 1472°F)
Distance to Spot Ratio: 40 to 1
Basic Accuracy: 1.50%
Response Time: <500ms
Emissivity: Adjustable, Built-in table 0.10 to 1.00 by 0.01
Data Storage: Yes
Display Type: High Contrast White on Black
Alarm Hi Lo: Yes
Voltage: 12V
Switch Type: Trigger
SP05-14 GREGG DISTRIBUTORS LTD.
•Infrared Surface Temperature Measurement from -30 to 800°C
(-22 to 1472°F) •Contact Surface Temperature Measurement
from -40 to 550°C (-40 to 1022°F) •40:1 Distance to Spot Ratio. Measures a one foot spot from 40 ft. away. •High Contrast,
White on Black Display with Backlight for easy reading •Extra
Bright LED Floodlight increases usability in low light conditions
•User Configurable Hi/Low Alarm Settings •Adjustable emissivity from 0.10 to 1.00 for increased accuracy •Unit Memory
stores up to 20 temperature values •Lockable Trigger for tester
to continue measuring
Includes: Laser TEMP-GUN™, (1) M12™ REDLITHIUM™
Battery, Battery Charger, Carrying Case, and Manual
Part No. 2276-21.
Part No. 2276-21NST, Includes a NIST Certificate of Calibration with Data, needed by many organizations as proof of
calibration with the date when NIST Calibration was performed.
SPECIFICATIONS
Temperature Range: -30°C to 800°C (-22° to 1472°F)
Distance to Spot Ratio: 40 to 1
Basic Accuracy: 1.50%
Contact Temperature: -40°C to 550°C (-40°F to 1022°F)
Display Resolution: 0.1°C (0.1°F)
Response Time: <500ms
Emissivity Adjustable: 0.10 to 1.00
MIN MAX AVG DIF: Yes
Locking Trigger: Yes
Switch Type: Trigger
The M12™ Caulk and Adhesive Gun is the lightest, most compact cordless powered caulk gun on the market today. With
up to 400 lbs. of pushing force the M12™ Caulk Gun easily
dispenses everyday construction sealants and adhesives. The
combination Variable Speed Trigger and Max-Speed dial allow
for total application speed control. The 360 degree Rotating
Collar delivers maximum control around turns. The tool also
features auto-reversing anti-drip, a seal puncture tool and
durable hang hook for versatility on the job. Powered by the
revolutionary M12 REDLITHIUM™ Battery, the M12 Caulk Gun
will dispense up to 150 10oz. tubes of building sealant on one
charge.
Includes: Caulk and Adhesive Gun Bare Tool, 12V 10 oz
Conversion Kit, (1) M12™ REDLITHIUM™ Battery, and Battery
Charger
Part No. 2441-21.
Part No. 2441-20, Tool only.
•Measures Depth and Location of Rebar Up To 6” Through
Concrete •Detects Location of Wood and Metal Studs •Differentiates Between Steel (Ferrous) and Copper or Aluminum
(Non-Ferrous) Metals •Intuitive user interface displays stud
centers and edges •High contrast white on black display and
backlight for easy reading •Rugged over-molding improves
durability and user grip •One button calibration for all surfaces
Includes: Detection Tool, (1) M12™ REDLITHIUM™ Battery,
Battery Charger, Carrying Case, and Manual
Part No. 2291-21.
Part No. 2291-20, Tool only.
SPECIFICATIONS
Display Resolution: 0.5”
Scanning Depth - Stud Mode: 1½”
Scanning Depth - Metal Mode: 6”
Accuracy - Stud Center: 1/4”
Accuracy - Metal Center: 1/2”
Switch Type: On/Off Button
M12™ LED STICK LIGHT
•Powerful 3-LED Design •Multi-Position Stainless Steel Hook •Over 4+ Hours of Run-time
•220 Lumens - Bright, Smooth, Even Beam
•Impact Resistant/Replaceable Lens
Part No. 2351-20.
MILWAUKEE
MWK/2826/2827
M12 Cordless Power Tool Batteries
M12™ REDLITHIUM™ BATTERY
•REDLINK™ Intelligence: Provides optimized performance and
overload protection using total system communication between
tool, battery and charger •Best-in-class construction: Offers
long-lasting performance and durability •Fuel gauge onboard:
Displays remaining runtime for less downtime on the job •Allweather performance: Delivers fade-free
power in extreme jobsite conditions •Versatility: Powers Milwaukee M12™ cordless
power tools
Part No. 48-11-2401.
Part No. 48-11-2411, Pack of 2.
M12 REDLITHIUM™ 2.0 COMPACT
BATTERY
Delivers up to 2X more runtime, 20% more power and 2X
more recharges than standard lithium-ion batteries.
•REDLINK™ Intelligence: Provides optimized performance and
overload protection using total system communication between
tool, battery and charger •Best-in-class
construction: Offers long-lasting performance and durability •Fuel gauge onboard:
Displays remaining runtime for less downtime on the job •All-weather performance:
Delivers fade-free power in extreme jobsite
conditions •Versatility: Powers all Milwaukee M12™ cordless power tools
Part No. 48-11-2420.
M12™ XC HIGH CAPACITY
REDLITHIUM™ BATTERY
•High current discharge - increased power and performance
(Not compatible with #2320-21) •REDLINK™ Intelligence:
Provides optimized performance and overload protection using
total system communication between tool, battery and charger
•Best-in-class construction: Offers long-lasting performance
and durability •Fuel gauge onboard: Displays remaining
runtime for less downtime on the job •All-weather performance: Delivers fade-free power in extreme jobsite conditions
•Versatility: Powers Milwaukee M12™ cordless power tools
Part No. 48-11-2402.
Part No. 48-11-2412, Pack of 2.
M12™ REDLITHIUM™ XC 4.0 EXTENDED CAPACITY
BATTERY
Delivers up to 2X more runtime, 20% more power and 2X more recharges than standard
lithium-ion batteries.
•REDLINK™ Intelligence: Provides optimized performance and overload protection using total
system communication between tool, battery and charger •Best-in-class construction: Offers
long-lasting performance and durability •Fuel gauge onboard: Displays remaining runtime for less
downtime on the job •All-weather performance: Delivers fade-free power in extreme jobsite conditions •Powers all Milwaukee M12™ cordless power tools
Part No. 48-11-2440.
Corded Power Tools
3/8” CLOSE QUARTER ANGLE DRILL
1/2” SUPER HAWG™ WITH CARRYING CASE
SPECIFICATIONS
Length: 11”
Weight: 3.9 lbs
Voltage: 120V AC
Cord Type: 8’ Fixed
No Load RPM: 0-1,300
Amps: 3.5
Spindle: 1/2”-20
Capacity in Steel: Twist bit 3/8”
Chuck Size: 3/8”
Chuck Type: Keyed
SPECIFICATIONS
Length: 22”
Weight: 14.7 lbs
Voltage: 120V AC
Cord Type: 8’ Fixed
No Load RPM: 450-1,750
Amps: 13
Spindle: 5/8”-16
Capacity in Steel: Twist Bit 1/2”
Capacity in Wood: Auger 1-1/2”|Self-Feed 4-5/8”
Chuck Size: 1/2”
Chuck Type: Keyed
Gear Train: Triple
•3.5-amp motor: Produces up to 1300 RPM with reverse •Metal frame
gear train: Provides longer service life •Textured palm grip: Offers comfort,
control and reduces slippage •Angle cord exit: Keeps the durable 8 ft. fixed
rubber cord out of the work area
Part No. 0370-20.
•Powerful 13.0-amp motor: Delivers 450 RPM - 1,750 RPM with a clutch in low gear •Roto-Lok®
handle: Features 90° left-right rotations for maximum comfort in all applications •Reinforced
nylon resin casing: Provides durability and less weight than metal with greater heat dissipation
and resistance to chemicals
Part No. 1680-21.
www.greggdistributors.ca SP05-15
CONOCOPHILLIPS®
UNO/3917
Industrial Oils
76 SUPER MOTOR OIL
Conventional Passenger Car Engine
Oil
VERSATRANS® LV ATF
VersaTrans LV ATF is a full-synthetic, low-viscosity (LV) transmission fluid approved for use in passenger car and light truck
automatic transmissions that require a Ford MERCON® LV or
High-quality, conventional engine oil designed for use in
GM DEXRON® -VI fluid. It also is recommended for use in
gasoline-fueled passenger cars and light trucks that do not
Toyota vehicles where a Type WS fluid is specified, and in
require an ILSAC GF-4 oil for warranty coverage. Formulated
to provide excellent wear protection, to minimize the formation many newer import vehicles. VersaTrans LV ATF is specifically
engineered to help ensure long service life and to provide
of sludge and varnish, and to resist viscosity and thermal
breakdown, even in severe service. It also protects against rust consistent shift performance for the life of the fluid, as well as
better shift performance under extreme operating conditions. It
and bearing corrosion, and has good foam resistance.
is highly shear stable and has excellent oxidation resistance for
*Denotes Super Synthetic Blend motor oil — these products
long fluid life. It provides excellent anti-shudder performance
exceed ILSAC GF-5 requirements. API SN SL GF-5.
and has excellent low-temperature properties for easier shifting
†Denotes API SL SJ.
in cold weather. The low-viscosity fluid results in less frictional
‡Denotes API SM SL.
drag (churning loss) for improved transmission efficiency,
PART NO.
GRADE
SIZE
thereby offering the potential for improved fuel economy
SUP-30-1†.................... SAE 30 .................. 0.946 litre
performance.
SUP-40-1†.................... SAE 40................... 0.946 litre
PART NO.
SIZE
SUP-0/20-1*................. SAE 0W-20 ........... 0.946 litre
ATF-LV-1............ 0.946 litre
SUP-0/20-205*............. SAE 0W-20 ........... 205 litre
ATF-LV-205........ 205 litre
SUP-5/20-1*................. SAE 5W-20 ........... 0.946 litre
SUP-5/20-205*............. SAE 5W-20 ........... 208 litre
SUP-5/20-B*................. SAE 5W-20 ........... bulk
SUP-5/30-1*................. SAE 5W-30 ........... 0.946 litre
SUP-5/30-20*............... SAE 5W-30 ........... 18.92 litre
SUP-5/30-205*............. SAE 5W-30 ........... 208 litre
SUP-5/30-B*................. SAE 5W-30............ bulk
SUP-10/30-1*............... SAE 10W-30.......... 0.946 litre
SUP-10/30-20*............. SAE 10W-30.......... 18.92 litre
SUP-10/30-205*........... SAE 10W-30 ......... 208 litre
SUP-10/30-B*............... SAE 10W-30.......... bulk
SUP-10/40-1‡............... SAE 10W-40 ......... 0.946 litre
SUP-10/40-205‡........... SAE 10W-40.......... 208 litre
QUAKER STATE®
Motor Oils
Ultimate Durability™ FULL SYNTHETIC MOTOR OIL
Quaker State® has an easy way to help improve your fuel economy. The new Quaker State®
Ultimate Durability™ Full Synthetic Motor Oil helps save an average of 2¢ per litre of gas.
Demand more from your motor oil. Quaker State® Ultimate Durability™ Full Synthetic Motor Oil
not only helps improve fuel economy. It’s also a weapon against engine wear – no other leading
synthetic motor oil provides better protection from friction-related wear.
Why should you trade up to Quaker State® Ultimate Durability™ Full Synthetic Motor Oil?
•Helps save an average of 2¢ per litre of gas
•Unsurpassed wear protection
•Superior lubrication flow and pumpability in below-freezing weather
•Improved resistance to engine stress at high engine speeds and under heavy loads
•Superior resistance to thermal and viscosity breakdown
•High resistance to oxidation, keeping the oil from breaking down
•Excellent protection against the formation of sludge and other harmful deposits
•Provides consistent rust protection
PART NO.
GRADE
SIZE
550036723................... SAE 5W-30 ........... 946 ml
550036734................... SAE 5W-30 ........... 5 litre
SP05-16 GREGG DISTRIBUTORS LTD.
CVT FLUID
CVT Fluid is a premium quality, full-synthetic transmission fluid
specifically designed for use in passenger cars with belt-driven
continuously variable transmissions. It has been specifically
engineered to have the unique frictional properties required for
use in this type transmission. CVT Fluid has carefully balanced
frictional properties to protect against belt slippage and wear
while also providing excellent anti-shudder performance. It has
high shear stability and excellent oxidation resistance for long
service life. It helps protect against sludge and varnish formation, and has excellent low-temperature properties for easier
shifting in cold weather. The synthetic formulation provides
enhanced performance benefits at extreme temperatures
compared with conventional, all-mineral transmission fluids.
PART NO.
SIZE
ATF-CVT-1......... 0.946 litre
ATF-CVT-205..... 205 litre
QUA/3327
JOMAC
JOM/2602
General Purpose Gloves
Canadian Made.
SUPER GREEN KING - STRIKER®
•High visibility impact patch •Excellent grip in oil based applications •Highest level of comfort and dexterity among impact gloves •3/8” back hand
impact protection •Withstands multiple washings •Heavy cotton fleece
keeps hands warm in cold conditions and wicks moisture in warm conditions
•The most recommended glove in the drilling industry by workers
Part No. SGK-STR.
SAFEWAY
SWY/3989
First Aid/Medical Supplies
SPLINTER OUT™
Use the sterile point to gently loosen the skin above and around the splinter until
the splinter can be lifted out. Surface skin has few nerve endings and can be gently picked away, exposing the splinter with minimum discomfort. Full instructions
appear on the back of each card and individual wrapper.
Part No. F6106702, Pack of 2.
Part No. F6106710, Pack of 10.
FLEXFAB®
FLX/2223
Silicone Charge Air Cooler Hose
SILICONE CHARGE AIR COOLER HOSE (CAC) — RED —
HOT SIDE
For superior connection between engine mounted charge air systems components. Ideal for
handling slight misalignments and isolating vibrations between hose ends. Flexfab charge
air hose is built with 4 plies of DuPont Nomex® — iron oxide red. Hot side 260°C maximum
operating temperature.
Part No.
I.D.
O.D.
7731-0001
7732-0001
7715-0002
7727-0001
7723
7728
7742-0001
7797
3”
3.5”
4”
4”
4”
4”
4.5”
5”
3.28”
3.73”
4.23”
4.23”
4.23”
4.23”
4.73”
5.23”
Stainless Max. Oper.
Length Steel Rings Pressure
6”
2
60 psi
6”
3
55 psi
6”
3
50 psi
8”
3
50 psi
6”
2
50 psi
7.5”
3
50 psi
6”
3
45 psi
6”
3
35 psi
CONVOLUTED REDUCERS (CAC) — RED — HOT/COLD
SIDE
Can be used on both hot side and cold side of the CAC system.
Construction: 4-Ply Silicone Coated Meta-Aramid Fabric with Stainless Steel
Pressure Retention Rings
Temperature range: -54°C to 260°C (-65°F to 500°F)
Applications: Used on diesel truck engines to deliver pressurized intake air to the charge air
intercooler and intake manifold
Part No.
7868
7726
7766
7880
7866
Stainless Max. Oper.
Length Steel Rings Pressure
2.50”/3.00” 2.73”/3.23” 4.00
None
40
3.00”/3.50” 3.23”/3.73” 5.00
2
55
3.00”/4.00” 3.23”/4.23” 6.30
2
50
3.50”/4.00” 3.73”/4.23” 6.00
2
50
4.00”/4.50” 4.23/4.73 7.00
3
45
I.D.
O.D.
90° SILICONE ELBOWS — BLUE
TRY/2851
Part No.
I.D.
O.D.
7884-200
7884-225
7884-250
7884-275
2.00”
2.25”
2.50”
2.75”
2.32”
2.57”
2.82”
3.07”
Leg
Length
6.00”
6.00”
6.50”
7.00”
Bend
Radius
4.00”
3.38”
3.75”
4.13”
Burst
Pressure
200
175
150
125
TRYGG
Parts & Accessories
“SNUBBER” CHAIN TENSIONERS
•The center ring is coated steel, less fear of breaking
under heavy load •An extra ingredient is added to the rubber so that it maintains elasticity to -25°C, this minimizes
breakage and maintains tension •The legs float on the
center ring and can be folded together making packing
and storage convenient
Part No. 350108, Medium for light truck, 16” to 20”, Red.
Part No. 350109, Large for heavy truck, 21” to 24.5”, Blue.
www.greggdistributors.ca SP05-17
SKF/CR®
CRS/1573
Seals
Scotseal® PlusXL
The premium seal in the Scotseal® family of products from SKF, the Scotseal® PlusXL is synthetic lubrication – friendly
and offers better dirt exclusion than any other seal on the market. A specially formulated elastomeric material allows
the Scotseal® PlusXL to withstand extreme heat and cold, providing a whole new level of performance and endurance.
The Scotseal® PlusXL offers fleet managers the convenience of hand installation.
Interchangeable
Scotseal® Scotseal®
Inner
Outside
PlusXL
Classic Cup & Cone Cup & Cone with National:
45157 45160 592A/594572/580 370021A
47692/47691* 47697
370003A
*Narrow OE Version
GDX
GDX/3231/3234/3238/3246
Air Brake System
CR/SKF TURBO-2000 AIR
DRYER
Part No. 620602X, 12V.
Part No. 620606X, 24V.
*
D-2 GOVERNOR
High temperature and waterproof. Cut-in: 105
psi; Cut-out: 125 psi.
Part No. 284358.
Part No. 236577, Mounting Gasket.
SERVICE RELAY VALVE - 2
DELIVERY
Part No. 110410, Crack at 4 psi.
CONTROL LINE VALVE DOLLIES & TURNTABLE
AXLES
Crack at 0 psi.
Part No. 110570.
Control
3/8” PT
Reservoir
1/2” PT
Supply
1/2” PT
Delivery
3/8” PT
Del. (2)
3/8” PT
PUSH-PULL HAND
CONTROL VALVE FOR
SEALCO
•All ports (3) 1/4” PT
Part No. 17600.
CONTROL LINE VALVE TRAILERS
Control
3/8” PT
Crack at 0 psi.
Part No. 110580.
Reservoir
1/2” PT
Delivery (2)
3/8” PT
Gunite Automatic Slack Adjusters
Gunite AUTOMATIC SLACK ADJUSTERS
Part No.
AS1132
AS1133
AS1136
AS1140
AS1141
AS1147
Spline
1½ - 10
1½ - 10
1¼ - 10
1½ - 28
1½ - 28
1½ - 10
Arm Length
5½”
6”
5½”
5½”
6”
6”
SP05-18 GREGG DISTRIBUTORS LTD.
Control
3/8” PT
Gunite SLACK ADJUSTER PARTS
Part No. AS3016, Collar lock clevis (5/8”) for Gunite.
Part No. AS3018, Extended collar lock clevis (5/8”) for Gunite.
Part No. AS3019, Collar lock clevis (1/2”) for Gunite.
Part No. AS4004, 6 large and 6 small pins, with cotter pins.
Dolly
3/8” PT
NOTES
www.greggdistributors.ca SP05-19
ALBERTA
BRITISH COLUMBIA
EDMONTON - Main
Ph: (780) 4-GREGGS (447-3447)
Fax: (780) 451-2528
FORT ST. JOHN
Ph: (250) 785-8000
Fax: (250) 785-8022
EDMONTON - East
Ph: (780) 450-2233
Fax: (780) 450-2266
LANGLEY
Ph: (604) 888-9588
Fax: (604) 888-4688
EDMONTON - South
Ph: (780) 409-2000
Fax: (780) 409-2100
NANAIMO
Ph: (250) 754-1935
Fax: (250) 754-1165
NISKU
Ph: (780) 979-9988
Fax: (780) 979-9989
SASKATCHEWAN
ATHABASCA
Ph: (780) 675-3110
Fax: (780) 675-4774
CALGARY - Main
Ph: (403) 253-6463
Fax: (403) 253-5926
SASKATOON
Ph: (306) 343-6655
Fax: (306) 343-6656
www.greggdistributors.ca
CALGARY - Foothills
Ph: (403) 203-1928
Fax: (403) 236-1912
CLAIRMONT
Ph: (780) 567-2238
Fax: (780) 567-2239
DRAYTON VALLEY
Ph: (780) 621-0056
Fax: (780) 621-0057
FAIRVIEW
Ph: (780) 835-5115
Fax: (780) 835-3535
FORT MCMURRAY
Ph: (780) 715-4000
Fax: (780) 743-8833
GRANDE PRAIRIE
Ph: (780) 513-4000
Fax: (780) 513-6000
HIGH LEVEL
Ph: (780) 926-2521
Fax: (780) 926-3514
RAINBOW LAKE
Ph: (780) 956-2588
Fax: (780) 956-2589
RED DEER
Ph: (403) 341-3100
Fax: (403) 341-3210
SPIRIT RIVER
Ph: (780) 864-3333
Fax: (780) 864-3330
STRATHMORE
Ph. (403) 934-3710
Fax (403) 934-5453
Items may not be exactly as illustrated. Quantities on some items may be limited.
Errors are subject to correction. ©2014 Gregg Distributors Ltd. All rights reserved.
Proudly
Canadian!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising